Results for igt@i915_pm_rpm@basic-pci-d3-state

Result: Skip

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-gfaa966f69 (x86_64) (Linux: 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ x86_64)
Out 
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: yes
Usage count: 0
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x7c/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xe1/0x260 [i915]
   pci_pm_runtime_suspend+0x5d/0x1a0
   __rpm_callback+0x3f/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 0
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 3
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   intel_hdmi_detect+0x88/0x160 [i915]
   drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
   process_one_work+0x251/0x500
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_display_power_flush_work+0xdf/0xf0 [i915]
   intel_dp_detect+0x231/0x640 [i915]
   drm_helper_probe_detect_ctx+0x45/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
Wakeref count: 3
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   gmbus_xfer+0x29/0xb0 [i915]
   __i2c_transfer+0x17b/0x580
   i2c_transfer+0x7e/0x100
   drm_do_probe_ddc_edid+0xb7/0x130
   drm_edid_read_ddc+0x72/0x80
   intel_hdmi_set_edid+0x5e/0x2a0 [i915]
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   intel_hdmi_detect+0x88/0x160 [i915]
   drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
   process_one_work+0x251/0x500
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   intel_hdmi_set_edid+0x3f/0x2a0 [i915]
   intel_hdmi_detect+0xb7/0x160 [i915]
   drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
Test requirement not met in function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2432:
Test requirement: setup_environment(true)
Subtest basic-pci-d3-state: SKIP (0.000s)
Err 
(i915_pm_rpm:5278) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active
Subtest basic-pci-d3-state: SKIP (0.000s)
Dmesg
<6> [79.628606] Console: switching to colour dummy device 80x25
<6> [79.628653] [IGT] i915_pm_rpm: executing
<7> [79.636945] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [79.637335] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [79.637354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [79.637551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.638051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.638184] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [79.638255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [79.638267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [79.638386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.638946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [79.639478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [79.640002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [79.641123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [79.642055] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [79.642816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [79.643002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [79.643145] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [79.643270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [79.643877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.644079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [79.644144] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [79.644155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [79.644300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.645367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.645495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [79.646173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.646696] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.646720] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [79.646868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [79.671421] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.671425] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [79.671562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.671689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [79.675156] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [79.675171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [79.675299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.675794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.675953] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [79.676370] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [79.676382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [79.676561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.677063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [79.677587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [79.678140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [79.679243] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [79.680022] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [79.680624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [79.680784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [79.680912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [79.681037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [79.681654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.681843] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [79.682253] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [79.682265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [79.682383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.683489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.683615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [79.683946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.684402] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.684406] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [79.684657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [79.708731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.708735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [79.708845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.708976] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [79.709286] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [79.709298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [79.709417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.709902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.710074] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [79.710098] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [79.710108] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [79.710226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.710731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [79.711216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [79.711812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [79.713056] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [79.714158] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [79.714781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [79.714930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [79.715062] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [79.715189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [79.715830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.716031] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [79.716057] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [79.716067] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [79.716184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.717266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.717380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [79.718373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.719401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.719405] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [79.719518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [79.744698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.744702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [79.744823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.744951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [90.789724] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [90.798093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [90.822601] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [90.831919] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [90.832732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [90.834131] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [90.834004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.835216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.835972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [90.836271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.836557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [90.837039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [90.837636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [90.837778] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [90.837903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [90.838486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.838908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [90.839933] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [90.843526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [90.867690] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [90.873174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [90.873348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.873569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [90.874113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [90.874711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [90.874907] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [90.875096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [90.875757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.875969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [90.876966] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [90.876990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [90.880242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [90.903791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [90.909021] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [90.909148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.909687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [90.910221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [90.910796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [90.912467] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [90.913466] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [90.914127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [90.914532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [90.914718] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [90.914897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [90.915541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.915748] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [90.915773] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [90.915944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.917434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [90.917599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [90.918334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [90.918876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [90.918885] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [90.919052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [90.943146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [90.943153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [90.943295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.943654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [90.945148] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [90.947467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [90.971904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [90.976458] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [90.976604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.976741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [90.977179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [90.977772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [90.977917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [90.978051] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [90.978662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.978842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [90.979968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [90.982468] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.006893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.011986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.012120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.012667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.012865] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.012889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.013107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.013700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.014204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.014793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.016263] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.016938] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.017631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.017797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.017937] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.018073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.018672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.018819] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.018836] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.018964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.020047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.020176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.020881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.021375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.021381] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.021540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.046137] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.046143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.046255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.046392] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.047896] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.048040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.049447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.073913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.079384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.079501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.079965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.080105] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.080123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.080241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.080732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.081218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.081814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.083004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.084113] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.084828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.084990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.085123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.085287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.085904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.086044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.086060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.086182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.087245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.087360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.088057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.088570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.088575] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.088723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.113840] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.113845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.113969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.114106] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.115624] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.115764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.117125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.141475] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.146361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.146482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.146970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.147139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.147158] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.147301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.147807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.148291] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.148885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.150041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.151163] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.151798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.151953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.152087] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.152217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.152822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.152989] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.153004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.153123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.154163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.154316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.155063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.155597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.155603] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.155718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.180281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.180286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.180397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.180614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.182154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.182286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.184757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.209120] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.214387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.214504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.214969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.215108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.215126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.215245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.215718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.216233] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.216817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.217955] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.219036] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.219820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.219972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.220108] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.220237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.220836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.220984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.220999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.221121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.222219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.222334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.223282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.223817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.223824] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.223944] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.250711] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.250715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.250839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.250976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.251984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.252095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.253460] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.277823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.282691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.282808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.283280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.283443] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.283483] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.283625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.284087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.284612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.285164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.286280] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.287371] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.288136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.288288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.288436] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.288574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.289155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.289294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.289309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.289449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.290534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.290656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.291331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.291844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.291851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.291969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.318168] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.318172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.318281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.318417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.319903] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.320016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.321354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.345722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.350659] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.350814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.351284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.351465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.351490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.351621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.352083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.352610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.353160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.354254] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.355321] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.356082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.356234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.356367] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.356513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.357115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.357256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.357270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.357392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.358496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.358611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.359269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.359812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.359819] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.359940] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.387235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.387240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.387349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.387541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.388551] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.388668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.390008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.414373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.418565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.418698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.419170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.419316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.419335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.419495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.419993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.420533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.421073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.422207] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.423302] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.424065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.424218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.424351] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.424499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.425091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.425231] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.425246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.425367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.426456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.426570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.427253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.427790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.427797] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.427919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.454685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.454690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.454812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.454948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.456081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.456101] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.457455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.481829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.486695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.486809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.487282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.487446] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.487487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.487626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.488088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.488613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.489165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.490280] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.491372] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.492137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.492288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.492434] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.492584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.493164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.493299] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.493314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.493450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.494601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.494720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.496160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.496729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.496736] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.496855] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.522016] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.522020] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.522129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.522266] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.523747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.523863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.525111] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.549512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.553622] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.553748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.554222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.554372] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.554392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.554538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.555043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.555569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.556118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.557232] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.558326] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.559088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.559244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.559377] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.559521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.560113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.560252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.560268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.560388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.561497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.561611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.562289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.562827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.562834] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.562956] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.588591] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.588595] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.588704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.588840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.590330] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.590466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.591847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.616216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.621190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.621317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.621825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.621975] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.621993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.622113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.622593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.623091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.623688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.624789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.625891] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.626663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.626819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.626952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.627081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.627691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.627873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.627888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.628006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.629077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.629188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.630359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.630909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.630914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.631022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.657829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.657833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.657943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.658080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.659561] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.659677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.661040] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.685411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.690909] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.691043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.691544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.691722] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.691740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.691860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.692320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.692837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.693398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.694699] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.695786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.696559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.696720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.696849] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.696976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.697569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.697743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.697758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.697876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.698980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.699092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.699816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.700282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.700287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.700394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.723848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.723852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.723961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.724098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.725579] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.725691] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.727029] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.751299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.754936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.755051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.755544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.755729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.755747] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.755866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.756328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.756844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.757405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.758705] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.759786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.760560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.760713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.760846] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.760976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.761572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.761721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.761736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.761856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.762962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.763076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.763771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.764259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.764264] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.764375] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.790629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.790634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.790757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.790893] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.791914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.792085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.793450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.817800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.822708] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.822836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.823310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.823481] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.823521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.823664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.824127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.824653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.825203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.826333] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.827449] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.828080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.828235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.828368] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.828511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.829103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.829244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.829259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.829380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.830482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.830598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.831272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.831811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.831818] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.831939] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.858740] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.858757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.858865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.859002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.860007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.860123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.861476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.885866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.890835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.890977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.891482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.891662] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.891681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.891800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.892262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.892787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.893338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.894457] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.895406] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.896067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.896222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.896355] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.896510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.897098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.897234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.897249] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.897368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.898461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.898601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.899281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.899817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.899824] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.899971] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.925634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.925639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.925762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.925898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.926916] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.927093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.928454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.952782] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.957483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.957597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.958067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.958216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.958235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.958363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.958857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.959365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.959933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.961066] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.962163] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.962961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.963116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.963248] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.963378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.963978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.964123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.964138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.964259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.965335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.965458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.966136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.966673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.966680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.966801] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.990792] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.990796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.990905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.991041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.992537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.992655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.994027] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.018412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.023885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.024027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.024520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.024731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.024749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.024869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.025332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.025847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.026408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.027710] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.028786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.029558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.029711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.029844] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.029972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.030568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.030717] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.030732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.030853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.032467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.032644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.033321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.033825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.033830] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.033941] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.061248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.061255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.061380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.061592] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.063084] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.063204] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.064478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.088848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.093787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.093928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.094399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.094571] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.094608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.094778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.095251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.095773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.096327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.097626] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.098725] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.099468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.099620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.099753] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.099881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.100472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.100612] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.100626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.100748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.101833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.101946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.102634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.103129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.103134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.103245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.129970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.129976] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.130087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.130225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.131236] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.131348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.133764] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.158164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.162968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.163074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.163561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.163731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.163749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.163867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.164329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.164857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.165406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.166665] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.167765] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.168534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.168686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.168819] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.168947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.169538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.169677] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.169692] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.169813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.170878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.170992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.171686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.172178] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.172183] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.172294] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.197989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.197994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.198105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.198242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.199261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.199377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.201790] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.226194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.230882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.231034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.231533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.231715] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.231735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.231864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.232335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.232866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.233413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.234685] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.235781] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.236551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.236712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.236842] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.236968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.237556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.237728] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.237743] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.237861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.238973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.239085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.239805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.240278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.240283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.240391] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.266086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.266091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.266202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.266340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.267349] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.267490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.268869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.293214] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.298661] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.298804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.299280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.299442] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.299488] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.299630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.300103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.300627] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.301180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.302314] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.303411] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.304190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.304344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.304486] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.304615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.305196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.305335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.305349] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.305482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.306569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.306684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.307364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.307875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.307880] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.307991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.333682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.333699] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.333810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.333947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.335465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.335607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.336969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.361371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.366840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.366994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.367490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.367671] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.367691] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.367821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.368288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.368822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.369369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.370641] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.371740] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.372453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.372616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.372745] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.372870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.373456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.373628] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.373642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.373760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.375330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.375447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.376127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.376659] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.376664] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.376811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.403578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.403583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.403706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.403843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.405342] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.405523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.406903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.429739] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.433880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.434002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.434489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.434659] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.434677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.434797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.435258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.435781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.436335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.437623] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.438714] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.439453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.439605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.439737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.439866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.440455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.440595] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.440610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.440732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.441816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.441954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.442625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.443133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.443138] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.443248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.470026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.470030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.470139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.470275] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.471287] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.471400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.472818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.497220] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.502139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.502266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.502754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.502945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.502965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.503094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.503594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.504082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.504652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.505787] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.506889] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.507621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.507782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.507912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.508038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.508631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.508768] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.508782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.508901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.509969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.510080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.510806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.511259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.511264] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.511371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.537083] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.537087] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.537225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.537374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.538376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.538514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.539893] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.564302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.568454] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.568574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.569049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.569188] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.569206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.569326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.569828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.570341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.570917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.572060] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.573153] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.573915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.574067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.574200] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.574329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.574926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.575066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.575081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.575202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.576269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.576384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.577079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.577602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.577607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.577717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.602803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.602807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.602942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.603078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.604086] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.604198] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.605462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.629862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.634807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.634961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.635458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.635640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.635660] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.635789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.636261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.636785] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.637338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.638459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.639454] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.640215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.640366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.640510] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.640639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.641221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.641360] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.641375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.641505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.642579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.642693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.643375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.643878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.643883] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.643994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.668001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.668005] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.668113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.668249] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.669271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.669387] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.671776] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.696172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.700887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.701041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.701539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.701720] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.701740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.701868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.702340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.702870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.703416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.704683] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.705783] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.706551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.706712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.706841] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.706967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.707554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.707727] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.707741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.707859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.708971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.709082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.709792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.710270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.710275] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.710384] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.734953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.734960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.735095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.735241] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.736812] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.736947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.738350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.762743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.767709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.767809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.768270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.768408] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.768437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.768582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.769060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.769607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.770135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.771388] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.772452] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.773240] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.773392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.773550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.773677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.774255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.774390] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.774405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.774531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.775628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.775743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.777203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.777785] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.777792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.777936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.804697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.804702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.804827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.804964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.807350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.807372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.808787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.833226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.838760] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.838953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.839556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.839822] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.839853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.840082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.840679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.841225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.841816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.843146] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.843875] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.844413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.844695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.844925] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.845150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.845845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.846088] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.846114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.846325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.847543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.847742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.848514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.849014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.849019] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.849135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.874865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.874869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.874978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.875114] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.876138] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.876283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.878779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.903145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.908691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.908829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.909300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.909501] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.909523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.909666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.910164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.910716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.911232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.912434] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.913454] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.914214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.914367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.914511] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.914640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.915221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.915361] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.915376] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.915505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.916589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.916703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.917390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.917873] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.917878] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.918016] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.942595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.942599] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.942711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.942851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [92.943867] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [92.944027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.945414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [92.969816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [92.975246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [92.975370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.975921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.976085] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [92.976105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.976263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.976785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.977265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.977849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.979020] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.980123] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.980826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.980979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.981112] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.981242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.981847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.981986] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [92.982001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.982123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.983198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.983313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.984007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.984506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.984512] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.984647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.009225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.009229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.009337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.009543] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.010592] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.010703] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.012115] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.036465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.041351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.041464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.041930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.042099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.042117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.042261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.042736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.043240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.043830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.044932] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.046041] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.046827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.046983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.047116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.047245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.047848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.048019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.048034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.048153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.049213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.049324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.050047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.050556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.050563] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.050713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.078578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.078583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.078708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.078846] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.080344] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.080490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.081887] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.106261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.111233] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.111338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.111848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.112018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.112035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.112216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.112732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.113245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.113831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.114952] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.116058] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.116825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.116979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.117111] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.117241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.117885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.118035] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.118050] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.118168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.119239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.119354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.120055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.120550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.120555] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.120667] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.144105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.144109] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.144220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.144360] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.146015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.146035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.147372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.171740] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.176617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.176742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.177215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.177364] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.177383] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.177525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.178065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.178590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.179140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.180380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.181451] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.182211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.182364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.182508] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.182637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.183218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.183358] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.183373] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.183504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.184579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.184693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.185376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.185875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.185880] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.185991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.212189] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.212193] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.212303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.212482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.213509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.213658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.215020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.239388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.244930] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.245075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.245595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.245782] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.245800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.245949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.246413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.246943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.247494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.248669] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.249759] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.250452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.250604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.250736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.250865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.251465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.251606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.251620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.251742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.252827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.252952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.253632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.254122] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.254128] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.254267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.279404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.279409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.279558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.279773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.281294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.281410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.282840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.307246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.312235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.312360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.312872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.313052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.313071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.313228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.313763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.314245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.314813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.315950] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.317034] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.317821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.317973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.318106] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.318234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.318838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.318977] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.318992] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.319113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.320179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.320294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.320979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.321460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.321465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.321619] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.344594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.344599] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.344713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.344863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.346357] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.346568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.347944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.372351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.375944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.376051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.376561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.376718] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.376736] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.376855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.377319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.377848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.378429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.379460] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.380456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.381226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.381380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.381535] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.381665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.382259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.382449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.382465] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.382613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.383698] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.383813] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.384492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.384988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.384994] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.385105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.410754] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.410759] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.410882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.411019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.412045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.412230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.413442] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.437797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.442679] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.442822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.443297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.443515] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.443562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.443705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.444178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.444700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.445265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.446458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.447452] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.448213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.448364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.448514] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.448643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.449236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.449376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.449391] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.449521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.450598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.450713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.451392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.451881] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.451886] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.452008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.477673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.477678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.477799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.477935] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.478955] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.479122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.480478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.504874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.510033] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.510130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.510633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.510785] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.510804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.510952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.511416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.511945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.512501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.513645] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.514751] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.515455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.515606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.515739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.515868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.516470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.516610] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.516625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.516746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.517832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.517946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.518628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.519111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.519116] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.519237] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.543817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.543821] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.543932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.544071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.545238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.545258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.547756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.572167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.576432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.576543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.577003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.577143] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.577160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.577279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.577754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.578271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.578830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.580086] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.581154] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.581917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.582070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.582203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.582331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.582926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.583066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.583081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.583203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.584267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.584382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.585078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.585603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.585608] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.585719] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.609744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.609748] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.609871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.610007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.611027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.611189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.612480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.636881] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.641456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.641556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.642006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.642173] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.642191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.642310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.642810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.643298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.643888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.644950] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.646033] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.646821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.646974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.647107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.647235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.647839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.647974] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.647989] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.648107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.649176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.649287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.649625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.650106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.650111] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.650246] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.675909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.675914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.676025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.676163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.677722] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.677893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.679231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.703646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.709023] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.709215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.709825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.710091] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.710122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.710353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.710952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.711508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.712075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.713394] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.714440] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.715207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.715367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.715521] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.715657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.716245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.716392] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.716407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.716544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.717628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.717754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.718482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.718978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.718983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.719105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.745832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.745837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.745974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.746112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.747645] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.747781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.749126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.773570] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.779025] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.779214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.779815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.780080] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.780112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.780342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.780942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.781501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.782067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.783396] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.784116] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.784832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.784992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.785132] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.785267] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.785880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.786026] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.786042] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.786169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.787252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.787371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.788072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.788576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.788582] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.788718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.814926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.814930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.815040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.815177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.816678] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.816828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.818129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.842535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.847462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.847586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.848050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.848223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.848242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.848386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.848921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.849406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.849993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.851098] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.852196] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.852991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.853147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.853280] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.853409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.854000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.854140] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.854155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.854277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.855352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.855478] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.856169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.856674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.856680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.856790] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.880815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.880819] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.880941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.881078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.882726] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.882746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.884118] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.908515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.913371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.913486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.913948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.914116] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.914135] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.914279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.914773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.915257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.915847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.916953] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.918053] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.918824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.918976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.919109] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.919238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.919843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.919983] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.919998] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.920119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.921194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.921309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.922008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.922509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.922515] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.922626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [93.946063] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.946067] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [93.946174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.946311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [93.947961] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [93.947991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [93.949341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [93.973722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [93.979179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [93.979349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.979930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.980244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [93.980275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [93.980554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.981125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [93.981666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [93.982233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [93.983485] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [93.984199] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [93.984736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [93.984999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [93.985229] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [93.985475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [93.986167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [93.986408] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [93.986451] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [93.986663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [93.987860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.988059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [93.988860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [93.989342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [93.989350] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [93.989555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.013662] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.013667] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.013800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.013946] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.014936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.015051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.016446] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.040813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.046174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.046293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.046807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.046985] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.047004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.047133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.047659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.048180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.048776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.049923] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.051013] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.051786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.051940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.052073] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.052203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.052805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.052968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.052983] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.053101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.054205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.054316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.054992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.055528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.055533] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.055684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.081343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.081347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.081480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.081678] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.083168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.083284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.085749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.110153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.114463] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.114562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.115026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.115164] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.115182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.115301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.115859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.116358] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.116926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.118083] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.119154] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.119916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.120067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.120200] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.120329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.120927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.121066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.121081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.121202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.122277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.122391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.123085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.123608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.123613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.123724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.147190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.147195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.147304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.147486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.149021] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.149138] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.150463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.174815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.179652] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.179770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.180245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.180393] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.180412] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.180554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.181087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.181637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.182165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.183290] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.184385] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.185155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.185306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.185451] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.185580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.186162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.186302] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.186317] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.186448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.187523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.187638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.188301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.188828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.188833] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.188946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.213514] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.213518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.213640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.213776] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.215264] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.215378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.217800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.242205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.246839] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.246959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.247443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.247656] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.247674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.247792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.248298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.248810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.249359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.250614] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.251717] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.252338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.252512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.252670] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.252796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.253386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.253543] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.253571] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.253717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.254824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.255388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.255726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.256170] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.256175] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.256314] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.283078] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.283082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.283191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.283327] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.284845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.284961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.286324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.310693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.315988] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.316112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.316625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.316817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.316836] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.316966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.317485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.317981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.318549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.319735] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.320780] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.321540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.321701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.321830] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.321956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.322580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.322729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.322744] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.322862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.324497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.324649] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.325333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.325896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.325901] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.326036] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.352272] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.352276] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.352389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.352538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.354050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.354165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.355477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.379866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.385318] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.385480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.385978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.386123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.386142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.386268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.386791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.387290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.387887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.389041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.389997] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.390756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.390908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.391041] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.391170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.391811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.391989] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.392004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.392123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.393238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.393352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.394303] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.394834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.394839] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.394951] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.418452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.418457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.418578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.418714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.420227] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.420363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.422777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.447178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.451893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.452018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.452522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.452714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.452734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.452863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.453338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.453869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.454451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.455456] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.456461] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.457223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.457375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.457531] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.457736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.458340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.458511] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.458545] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.458705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.459805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.460369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.461087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.461599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.461604] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.461781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.488020] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.488024] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.488132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.488268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.489759] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.489935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.491305] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.515679] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.520558] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.520689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.521164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.521313] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.521332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.521489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.522000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.522536] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.523080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.524325] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.525404] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.526174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.526326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.526471] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.526601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.527182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.527322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.527337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.527467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.528554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.528669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.529350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.529850] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.529855] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.529966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.552935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.552940] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.553053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.553193] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.554219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.554338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.556789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.581194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.586354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.586508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.586978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.587124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.587143] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.587268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.587762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.588276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.588853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.590012] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.591114] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.591837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.591988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.592121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.592250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.592855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.593019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.593034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.593151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.594766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.594890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.596090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.596651] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.596656] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.596804] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.622492] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.622496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.622617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.622754] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.624252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.624365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.625814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.650150] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.654816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.654961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.655458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.655661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.655679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.655814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.656291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.656805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.657366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.658456] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.659456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.660238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.660391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.660538] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.660694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.661289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.661436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.661451] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.661602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.662676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.662817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.663515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.664003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.664008] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.664120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.688179] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.688183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.688292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.688436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.690179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.690199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.691476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.715859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.720693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.720811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.721285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.721443] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.721486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.721653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.722118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.722650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.723194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.724327] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.725448] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.726213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.726366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.726523] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.726707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.727286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.727430] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.727467] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.727627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.728748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.728860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.729783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.730300] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.730305] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.730476] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.756284] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.756289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.756399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.756610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.758191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.758326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.760426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.784741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.789632] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.789762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.790236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.790385] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.790404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.790547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.791086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.791634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.792161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.793280] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.794376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.795152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.795305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.795449] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.795606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.796190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.796329] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.796344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.796477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.797606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.797746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.798441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.798929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.798934] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.799045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.823101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.823106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.823216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.823352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.824898] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.825058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.826446] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.850780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.856248] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.856364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.856906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.857092] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.857110] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.857230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.857735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.858232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.858790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.860037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.861140] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.861903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.862055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.862187] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.862316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.862909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.863048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.863063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.863184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.864257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.864370] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.865062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.865573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.865578] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.865688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.889736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.889741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.889862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.889999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.891011] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.891127] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.892466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.916867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.921695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.921814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.922288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.922448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.922486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.922653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.923114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.923650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.924193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.925445] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.926455] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.927239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.927391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.927539] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.927704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.928287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.928437] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.928452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.928602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.929689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.929830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.930523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.931023] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.931029] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.931164] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [94.956835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.956853] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [94.956962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.957100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.958612] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [94.958735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [94.960127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [94.984522] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [94.989526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [94.989692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.990166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.990316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [94.990335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [94.990503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.991033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [94.991580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [94.992108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [94.993252] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [94.994322] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [94.995078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [94.995231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [94.995364] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [94.995505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [94.996116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.996256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [94.996271] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [94.996393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [94.997499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.997615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [94.998296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [94.998817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [94.998822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [94.998964] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.024111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.024116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.024226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.024364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.025901] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.026040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.027461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.051803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.057000] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.057120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.057625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.057812] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.057831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.057966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.058466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.058958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.059527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.060698] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.061781] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.062545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.062707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.062837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.062963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.063575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.063743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.063758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.063881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.064968] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.065085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.065777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.066271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.066278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.066401] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.090477] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.090482] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.090607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.090744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.092235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.092373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.094799] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.119189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.124320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.124464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.124948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.125093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.125112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.125237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.125753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.126265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.126842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.128009] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.128789] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.129556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.129708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.129841] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.129970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.130571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.130740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.130756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.130878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.131915] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.132051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.132737] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.133240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.133245] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.133358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.156843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.156848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.156970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.157107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.158764] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.158784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.160119] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.184515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.189350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.189474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.189945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.190123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.190143] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.190272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.190754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.191260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.191855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.193013] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.194120] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.194845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.194998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.195131] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.195261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.195867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.196034] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.196050] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.196172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.197247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.197362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.198060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.198574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.198579] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.198719] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.223841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.223846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.223969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.224105] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.225668] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.225845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.227129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.251512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.256385] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.256509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.256983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.257162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.257182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.257311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.257827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.258323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.258952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.260095] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.261194] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.261991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.262147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.262280] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.262409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.263046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.263223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.263238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.263356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.264471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.264587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.266063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.266627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.266632] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.266791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.291363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.291371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.291522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.291745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.293262] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.293401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.294832] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.319169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.323815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.323935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.324408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.324568] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.324609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.324777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.325241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.325773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.326316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.327458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.328415] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.329196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.329348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.329506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.329659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.330239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.330374] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.330388] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.330545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.332172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.332324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.333028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.333556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.333563] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.333731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.358328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.358333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.358470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.358639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.360304] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.360325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.362741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.387062] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.391818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.391944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.392417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.392606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.392627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.392806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.393270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.393800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.394345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.395456] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.396456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.397262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.397415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.397571] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.397724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.398304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.398473] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.398488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.398689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.400276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.400433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.401134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.402187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.402207] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.402382] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.425927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.425931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.426041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.426178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.427712] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.427891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.429091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.453468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.458327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.458461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.458928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.459106] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.459125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.459254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.459737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.460242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.460837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.461999] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.463103] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.463842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.463993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.464138] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.464267] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.464862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.465030] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.465045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.465167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.466264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.466387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.467048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.467626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.467633] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.467788] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.493499] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.493516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.493626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.493763] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.495269] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.495408] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.496848] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.521236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.526733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.526865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.527333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.527536] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.527556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.527709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.528176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.528707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.529250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.530386] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.531455] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.532218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.532370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.532526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.532680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.533259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.533395] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.533410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.533537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.535171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.535322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.536026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.536557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.536565] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.536722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.561877] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.561882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.561992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.562130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.563675] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.563866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.565289] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.589693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.595024] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.595141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.595655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.595840] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.595859] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.595978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.596493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.596984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.597555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.598721] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.599782] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.600547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.600700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.600832] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.600962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.601554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.601738] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.601754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.601876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.602981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.603106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.603800] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.604289] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.604296] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.604437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.627976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.627981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.628090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.628228] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.629744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.629907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.631279] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.655665] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.660536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.660657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.661131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.661280] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.661299] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.661439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.661964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.662508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.663050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.664168] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.665266] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.666036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.666188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.666322] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.666464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.667075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.667216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.667231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.667354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.668445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.668560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.669243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.669755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.669760] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.669901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.695006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.695010] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.695120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.695257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.696907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.696941] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.698347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.722668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.727490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.727608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.728083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.728261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.728280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.728409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.728925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.729408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.729999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.731166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.732285] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.733052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.733205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.733338] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.733483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.734091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.734230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.734246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.734368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.735463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.735578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.736291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.736817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.736822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.736973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.762605] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.762609] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.762750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.762887] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.764367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.764509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.765919] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.790305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.795309] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.795438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.795977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.796143] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.796162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.796310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.796813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.797299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.797886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.799041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.800151] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.800918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.801071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.801204] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.801334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.801932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.802097] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.802112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.802234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.803308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.803431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.804110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.804636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.804641] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.804782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.828286] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.828291] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.828400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.828610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.830153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.830289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.832734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.857066] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.861814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.861934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.862408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.862593] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.862614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.862798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.863260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.863796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.864339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.865458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.866414] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.867195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.867348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.867505] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.867694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.868273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.868409] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.868430] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.868610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.869732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.869843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.870768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.871281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.871286] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.871410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.895963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.895967] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.896078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.896215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.897716] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.897910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.899308] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.923653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.928487] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.928606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.929076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.929254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.929273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.929402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.929917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.930400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.930993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.932164] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.932994] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.933761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.933914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.934046] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.934176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.934776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.934943] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [95.934958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.935079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.936152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.936267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.936969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.937478] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.937483] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.937622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.961668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.961673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.961796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.961933] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.963412] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [95.963561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.964948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.989309] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.993535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.993644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.994118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.994266] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [95.994286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.994414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.994921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.995416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.995997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.997169] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.997972] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.998738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.998893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.999026] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.999154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.999807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.000027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.000043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.000164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.000854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.000970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.001816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.002290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.002295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.002407] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.028099] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.028104] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.028215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.028352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.029396] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.029695] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.031194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.055554] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.060381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.060506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.060981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.061159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.061178] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.061307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.061831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.062327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.062914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.064039] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.065166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.065934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.066086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.066219] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.066348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.066958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.067123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.067138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.067260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.068334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.068455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.069139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.069652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.069657] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.069808] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.094365] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.094369] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.094518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.094731] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.096213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.096348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.098757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.123143] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.127832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.127968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.128479] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.128668] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.128687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.128807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.129270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.129793] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.130346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.131457] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.132456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.133238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.133391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.133541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.133697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.134291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.134440] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.134455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.134605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.135693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.135834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.136503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.137022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.137028] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.137189] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.161226] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.161231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.161341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.161504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.163160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.163182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.164456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.188849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.194257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.194384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.194893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.195080] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.195098] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.195218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.195707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.196196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.196766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.197932] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.199034] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.199817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.199970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.200104] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.200234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.200834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.201001] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.201016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.201138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.202220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.202341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.203040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.203557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.203562] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.203701] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.229386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.229391] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.229539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.229751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.230775] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.230916] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.232296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.256683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.261512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.261633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.262107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.262256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.262275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.262404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.262920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.263414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.264033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.265329] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.266408] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.267045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.267198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.267331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.267488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.268140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.268276] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.268291] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.268409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.270049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.270162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.271362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.271880] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.271885] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.271995] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.297716] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.297721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.297845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.297982] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.299001] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.299137] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.300442] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.324799] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.330264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.330381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.330927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.331112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.331130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.331250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.331765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.332255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.332841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.334001] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.335097] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.335844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.335997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.336130] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.336259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.336852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.337027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.337042] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.337164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.338241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.338356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.339053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.339576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.339581] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.339720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.364861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.364866] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.364989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.365126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.366153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.366336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.368743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.393131] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.397854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.398004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.398520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.398709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.398729] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.398848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.399307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.399838] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.400387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.401455] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.402456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.403238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.403391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.403538] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.403695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.404289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.404437] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.404452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.404601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.405689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.405829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.406521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.407021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.407027] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.407162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.433341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.433346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.433465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.433678] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.435161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.435298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.437747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.462087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.467340] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.467501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.467984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.468131] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.468150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.468276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.468769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.469272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.469853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.471042] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.472192] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.472986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.473141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.473273] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.473402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.473996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.474162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.474177] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.474299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.475374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.475494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.476181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.476700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.476705] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.476845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.500850] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.500855] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.500977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.501114] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.502797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.502818] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.504150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.528536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.534033] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.534158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.534663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.534853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.534872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.534992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.535482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.535995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.536554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.537719] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.538781] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.539546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.539698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.539831] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.539960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.540551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.540719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.540734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.540857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.541961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.542086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.542782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.543269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.543276] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.543410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.566914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.566919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.567042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.567178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.568213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.568345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.570757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.595148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.600347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.600516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.600999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.601145] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.601164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.601290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.601798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.602297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.602877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.604027] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.605137] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.605905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.606058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.606190] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.606319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.606916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.607083] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.607098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.607219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.608276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.608390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.609086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.609613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.609618] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.609756] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.634345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.634350] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.634498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.634713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.636207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.636342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.638778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.663114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.666880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.666981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.667455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.667658] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.667677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.667798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.668261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.668813] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.669337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.670458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.671397] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.672048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.672200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.672332] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.672490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.673096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.673234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.673248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.673366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.674471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.674997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.675702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.676189] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.676194] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.676303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.700938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.700942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.701052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.701190] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.702785] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.702810] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.704124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.727536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.732433] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.732551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.733025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.733177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.733197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.733329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.733825] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.734342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.734901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.736179] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.737274] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.738042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.738196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.738329] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.738478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.739089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.739229] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.739246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.739367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.740462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.740578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.741251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.741777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.741782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.741923] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.767070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.767075] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.767187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.767324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.768836] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.768960] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.770327] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.794726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.799535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.799653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.800124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.800272] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.800292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.800430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.800966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.801490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.802053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.803191] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.804173] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.804942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.805095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.805228] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.805357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.805969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.806135] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.806150] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.806272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.807347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.807476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.808162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.808689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.808694] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.808868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.834023] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.834028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.834138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.834276] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.835777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.835976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.837357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.861711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.866427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.866546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.867009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.867186] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.867206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.867334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.867826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.868334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.868954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.870096] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.871196] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.871992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.872145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.872278] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.872406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.873037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.873215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.873230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.873348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.874972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.875085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.876271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.876854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.876861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.877012] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.902162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.902167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.902277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.902414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.904000] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.904198] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.905452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.929805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.935034] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.935159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.935644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.935857] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [96.935876] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.935996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.936484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.936999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.937583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.938728] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.939784] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.940549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.940703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.940836] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.940965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.941558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.941725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [96.941741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.941863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.942967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.943110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.943804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.944296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.944303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.944447] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.970190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.970195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.970305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.970486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.972018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [96.972155] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.973477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.997851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.002548] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.002701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.003175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.003325] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.003344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.003485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.004017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.004555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.005096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.006332] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.007446] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.008207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.008359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.008506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.008672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.009254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.009394] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.009409] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.009542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.010656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.010797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.011486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.011993] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.012000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.012122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.035621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.035638] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.035749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.035886] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.036915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.037066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.038463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.062852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.067702] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.067822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.068296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.068475] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.068496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.068675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.069168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.069692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.070243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.071385] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.072457] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.073246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.073399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.073547] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.073711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.074293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.074442] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.074457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.074607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.075694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.075820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.076540] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.077041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.077046] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.077157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.102260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.102265] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.102375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.102585] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.104114] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.104249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.105443] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.129792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.135195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.135340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.135888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.136070] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.136088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.136237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.136737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.137231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.137826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.138954] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.140036] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.140823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.140975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.141108] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.141237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.141831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.141999] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.142014] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.142136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.143214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.143383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.144131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.144663] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.144669] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.144781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.172087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.172093] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.172205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.172344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.173844] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.173992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.175341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.199699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.205026] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.205141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.205636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.205875] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.205900] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.206037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.206535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.207017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.207589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.208700] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.209788] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.210551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.210704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.210837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.210966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.211570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.211710] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.211725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.211846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.212950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.213066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.213826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.214336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.214343] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.214493] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.241286] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.241291] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.241403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.241601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.243274] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.243295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.245761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.270149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.275390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.275560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.276031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.276166] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.276184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.276300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.276828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.277324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.277906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.279155] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.280243] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.280988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.281140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.281307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.281510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.282143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.282286] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.282301] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.282439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.283516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.283631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.284285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.284849] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.284854] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.284964] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.311777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.311782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.311894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.312032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.313532] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.313687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.315033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.339407] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.345505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.345622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.346083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.346217] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.346235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.346351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.346890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.347387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.347971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.349255] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.350344] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.351106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.351285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.351515] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.351673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.352274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.352416] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.352446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.352569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.353656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.353770] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.354468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.354953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.354958] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.355069] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.380223] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.380228] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.380339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.380537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.382238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.382260] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.383445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.407848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.412731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.412850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.413315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.413503] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.413541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.413718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.414220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.414768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.415293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.416454] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.417453] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.418093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.418246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.418379] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.418521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.419103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.419242] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.419257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.419378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.420478] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.420593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.421277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.421786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.421793] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.421961] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.449313] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.449318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.449464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.449702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.451245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.451359] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.453763] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.478188] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.482859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.482993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.483493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.483709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.483736] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.483888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.484371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.484883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.485457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.486709] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.487790] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.488562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.488723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.488864] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.488999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.489614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.489762] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.489778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.489906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.490927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.491047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.491783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.492301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.492308] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.492495] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.519240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.519245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.519357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.519553] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.521318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.521339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.522772] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.547093] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.552064] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.552193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.552715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.552927] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.552952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.553093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.553624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.554106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.554679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.555786] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.556877] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.557463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.557645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.557775] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.557900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.558541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.558721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.558737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.558858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.559963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.560092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.560780] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.561261] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.561268] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.561400] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.587118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.587123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.587233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.587371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.588927] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.589066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.590468] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.614870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.619713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.619838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.620312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.620516] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.620555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.620702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.621194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.621733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.622270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.623376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.624453] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.625212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.625364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.625515] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.625673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.626267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.626407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.626430] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.626580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.627666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.627826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.628514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.629002] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.629007] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.629119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.653104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.653109] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.653222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.653363] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.654890] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.655067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.656472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.680874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.686307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.686455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.687006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.687159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.687177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.687297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.687801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.688286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.688876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.690039] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.691144] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.691774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.691927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.692059] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.692188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.692830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.693016] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.693031] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.693151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.694222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.694387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.694781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.695244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.695249] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.695357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.722717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.722722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.722847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.722984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.723997] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.724140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.725482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.749778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.755246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.755390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.755939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.756111] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.756130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.756278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.756775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.757256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.757824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.758956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.760039] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.760828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.760981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.761114] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.761244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.761837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.762018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.762034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.762156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.763234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.763348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.764053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.764547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.764553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.764664] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.789247] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.789252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.789362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.789586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.791108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.791225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.792440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.816815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.821669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.821794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.822269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.822417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.822457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.822615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.823093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.823600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.824154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.825279] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.826374] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.827135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.827287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.827433] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.827572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.828151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.828287] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.828302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.828441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.829605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.829718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.830697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.831174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.831179] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.831300] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.859140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.859145] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.859254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.859391] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.860915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.861038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.862375] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.886782] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.891675] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.891822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.892297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.892488] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.892522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.892642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.893119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.893664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.894181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.895302] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.896397] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.897179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.897332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.897491] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.897642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.898221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.898358] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.898372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.898545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.899694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.899830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.901007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.901577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.901582] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.901705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.926256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.926261] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.926371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.926594] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.928117] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.928232] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.930775] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.955094] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.959816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.959941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.960411] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.960609] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [97.960642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.960813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.961304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.961835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.962388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.963455] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.964460] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.965242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.965395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.965543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.965701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.966295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.966442] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [97.966457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.966607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.967694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.967835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.968526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.969009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.969016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.969138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.994832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.994851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [97.994962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.995100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.997141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [97.997257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [97.999760] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.024147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.028828] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.028954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.029449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.029670] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.029692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.029842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.030307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.030836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.031383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.032453] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.033460] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.034243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.034396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.034546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.034702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.035297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.035445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.035461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.035610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.036699] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.036840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.037532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.038013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.038020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.038144] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.062151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.062156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.062270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.062411] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.063946] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.064062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.065469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.089873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.094469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.094569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.095029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.095196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.095214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.095334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.095840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.096323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.096954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.098065] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.099169] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.099937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.100090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.100223] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.100352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.100961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.101127] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.101142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.101263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.102339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.102463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.103161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.103658] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.103664] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.103798] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.127306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.127311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.127430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.127645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.129161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.129302] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.131794] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.156161] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.160851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.160976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.161474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.161668] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.161687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.161823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.162301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.162829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.163381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.164454] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.165455] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.166235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.166388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.166550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.166704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.167283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.167441] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.167471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.167621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.168732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.169320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.169674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.170140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.170145] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.170253] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.197050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.197055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.197165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.197302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.198853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.198992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.200332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.224732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.230197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.230316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.230858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.231060] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.231085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.231221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.231742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.232214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.232802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.233950] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.235044] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.235839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.235992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.236125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.236254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.236858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.237023] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.237039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.237160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.238256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.238371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.239115] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.239649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.239657] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.239780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.266542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.266547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.266659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.266797] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.267811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.267961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.269356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.293655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.299037] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.299165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.299675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.299889] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.299915] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.300052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.300549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.301037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.301609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.302720] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.303789] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.304560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.304714] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.304847] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.304976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.305572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.305712] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.305727] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.305849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.306954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.307068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.307776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.308285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.308291] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.308470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.336345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.336350] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.336496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.336733] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.337790] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.337904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.339268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.363659] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.369043] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.369174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.369661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.369899] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.369924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.370064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.370562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.371048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.371644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.372784] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.373881] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.374622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.374775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.374908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.375038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.375647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.375787] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.375802] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.375923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.377017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.377174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.377918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.378441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.378449] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.378570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.406427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.406432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.406573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.406711] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.408217] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.408366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.409851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.434208] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.440242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.440341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.440878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.441080] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.441105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.441241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.441740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.442222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.442798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.443953] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.445037] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.445817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.445970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.446103] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.446233] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.446881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.447077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.447092] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.447211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.448311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.448441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.449122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.449619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.449624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.449765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.474339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.474344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.474472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.474681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.476174] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.476288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.478762] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.503144] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.508042] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.508144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.508643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.508797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.508816] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.508934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.509397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.509927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.510515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.511642] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.512733] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.513458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.513612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.513745] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.513874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.514481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.514621] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.514636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.514757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.515821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.515936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.516621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.517096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.517101] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.517212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.542357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.542362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.542490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.542673] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.544181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.544296] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.546808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.571183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.576352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.576565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.577025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.577161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.577179] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.577296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.577833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.578276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.578856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.580145] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.581243] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.581998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.582151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.582284] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.582413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.583011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.583178] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.583193] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.583315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.584377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.584500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.585178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.585722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.585729] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.585843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.609914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.609922] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.610060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.610207] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.611730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.611901] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.613297] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.637639] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.643031] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.643158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.643652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.643861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.643880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.644017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.644516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.645008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.645577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.646763] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.647882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.648623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.648776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.648908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.649037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.649637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.649805] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.649819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.649941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.651012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.651127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.651810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.652283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.652288] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.652398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.675863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.675868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.675991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.676128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.677762] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.677782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.679115] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.703465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.708325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.708445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.708907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.709085] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.709105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.709234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.709724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.710237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.710827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.711956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.713053] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.713847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.714001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.714134] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.714264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.714865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.715033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.715049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.715171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.716277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.716392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.716748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.717212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.717217] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.717326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.744109] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.744114] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.744227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.744367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.745404] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.745585] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.746987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.771374] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.776271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.776398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.776913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.777098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.777117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.777253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.777800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.778272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.778858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.780005] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.780786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.781548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.781710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.781840] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.781966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.782558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.782765] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.782780] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.782899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.783951] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.784074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.785246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.785822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.785829] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.785987] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.813302] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.813306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.813417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.813618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.814646] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.814785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.816096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.840526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.846061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.846247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.846887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.847187] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.847217] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.847451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.848071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.848614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.849216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.850483] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.851180] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.851773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.852038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.852267] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.852520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.853258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.853522] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.853548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.853826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.854993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.855213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.855979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.856555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.856563] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.856807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.880881] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.880886] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.881004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.881152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.882154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.882265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.884780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.909157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.914002] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.914103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.914587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.914791] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.914809] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.914944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.915456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.915935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.916505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.917683] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.918781] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.919543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.919695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.919827] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.919956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.920549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.920719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.920735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.920856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.921963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.922088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.922782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.923264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.923269] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.923380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [98.947378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.947383] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [98.947502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.947717] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [98.949244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [98.949379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [98.951792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [98.976208] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [98.980883] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [98.981034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.981529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.981745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [98.981764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [98.981913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.982378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.982906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.983461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.984634] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [98.985727] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [98.986462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.986643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.986773] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.986899] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.987540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [98.987758] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [98.987773] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [98.987892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.989492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.989667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [98.990380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [98.991460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [98.991481] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [98.991656] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.016777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.016782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.016907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.017045] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.018609] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.018744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.020096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.044472] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.049385] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.049521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.049992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.050169] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.050188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.050316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.050847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.051328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.051938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.053095] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.054167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.054931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.055083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.055216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.055344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.055947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.056112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.056127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.056249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.057355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.057487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.058139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.058753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.058759] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.058918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.085181] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.085186] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.085298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.085458] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.087055] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.087173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.088470] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.112832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.117670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.117795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.118267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.118417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.118456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.118630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.119121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.119664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.120183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.121297] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.122390] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.123164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.123316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.123461] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.123590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.124173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.124312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.124327] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.124457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.125543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.125657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.126350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.126830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.126835] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.126946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.151025] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.151029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.151139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.151275] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.152786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.152936] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.154333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.178704] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.184051] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.184171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.184666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.184874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.184893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.185041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.185527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.186018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.186587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.187763] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.188714] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.189463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.189636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.189769] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.189898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.190502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.190686] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.190702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.190823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.191918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.192060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.192743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.193222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.193229] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.193351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.216878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.216883] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.216994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.217131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.219194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.219320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.221791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.246203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.251039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.251268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.252026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.252471] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.252527] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.252909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.253612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.254315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.255020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.256662] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.257478] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.258053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.258312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.258568] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.258857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.259555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.259840] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.259866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.260079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.261288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.261536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.262329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.262809] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.262814] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.262932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.288575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.288582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.288722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.288859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.290348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.290497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.291875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.316253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.321149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.321273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.321788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.321974] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.321992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.322127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.322638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.323117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.323686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.324787] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.325883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.326621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.326782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.326911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.327037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.327626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.327824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.327838] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.327958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.328675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.328794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.329544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.330022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.330027] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.330148] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.355313] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.355318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.355440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.355647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.357165] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.357281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.359753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.384159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.388432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.388570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.389034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.389200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.389218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.389338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.389841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.390327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.390926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.392040] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.393157] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.393922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.394074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.394208] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.394337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.394943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.395083] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.395098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.395220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.396294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.396407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.397113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.397607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.397613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.397723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.422289] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.422293] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.422404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.422618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.423655] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.423790] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.425125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.449526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.455011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.455134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.455683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.455856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.455888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.456008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.456545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.457025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.457582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.458759] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.459781] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.460544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.460696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.460828] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.460958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.461548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.461687] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.461702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.461823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.462921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.463035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.463723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.464216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.464221] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.464332] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.488369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.488374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.488533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.488752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.490261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.490378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.492785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.517162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.521852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.521976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.522495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.522682] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.522701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.522836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.523311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.523840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.524387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.525679] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.526766] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.527456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.527617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.527746] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.527872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.528502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.528643] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.528658] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.528779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.529858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.529973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.530658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.531136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.531141] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.531251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.554713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.554718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.554832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.554972] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.556493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.556651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.558005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.582339] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.587234] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.587362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.587877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.588057] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.588077] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.588220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.588713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.589211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.589781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.591019] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.592121] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.592828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.592980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.593113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.593243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.593847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.593987] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.594002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.594123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.595198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.595312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.596011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.596506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.596513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.596637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.621232] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.621237] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.621350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.621578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.623206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.623338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.625766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.650121] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.654852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.654977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.655479] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.655721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.655746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.655895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.656366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.656894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.657475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.658647] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.659751] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.660457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.660610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.660743] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.660872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.661466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.661606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.661621] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.661743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.662829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.662999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.663760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.664242] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.664249] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.664362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.688415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.688427] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.688566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.688703] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.690218] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.690386] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.692803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.717206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.722111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.722236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.722757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.722941] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.722960] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.723093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.723611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.724085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.724653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.725787] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.726878] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.727620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.727782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.727911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.728037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.728653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.728823] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.728839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.728961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.730031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.730146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.730830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.731321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.731326] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.731456] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.756044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.756049] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.756161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.756299] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.757848] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.758008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.759359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.783670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.788435] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.788563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.789028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.789165] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.789184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.789303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.789841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.790340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.790924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.792312] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.793403] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.794171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.794372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.794582] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.794725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.795319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.795476] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.795492] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.795615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.796692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.796806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.797501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.798004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.798009] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.798124] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.823361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.823366] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.823512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.823776] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.825293] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.825407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.827788] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.852221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.857231] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.857337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.857877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.858089] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.858114] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.858289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.858823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.859330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.859909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.861004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.862093] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.862746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.862900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.863033] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.863162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.863758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.863899] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.863914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.864036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.865103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.865216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.865904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.866372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.866377] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.866502] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.891072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.891077] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.891188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.891326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.892866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.893006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.894346] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.918792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.924023] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.924243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.924862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.925222] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.925264] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.925549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.926122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.926669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.927219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.928482] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.929262] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.929812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.929973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.930113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.930249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [99.930851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.930997] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [99.931013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [99.931140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.932224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.932345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [99.933065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [99.933611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.933618] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [99.933795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [99.961174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [99.961179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [99.961291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.961464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [99.963056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [99.963191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [99.964465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [99.988747] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [99.993983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [99.994104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.994615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [99.994833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [99.994858] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [99.995005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [99.995503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [99.995990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [99.996563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [99.997687] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [99.998790] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [99.999557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [99.999711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [99.999844] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [99.999973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.000572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.000736] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.000752] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.000874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.001959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.002102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.002850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.003358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.003365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.003518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.028149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.028154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.028265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.028403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.029945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.030073] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.031469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.055936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.061039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.061149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.061648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.061849] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.061874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.062019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.062531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.063016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.063613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.064737] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.065790] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.066554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.066716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.066846] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.066972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.067590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.067740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.067754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.067874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.068966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.069610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.070357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.070899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.070904] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.071080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.098430] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.098436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.098547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.098685] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.100191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.100341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.102457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.126738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.131471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.131571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.132036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.132225] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.132250] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.132441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.132983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.133508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.134057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.135170] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.135980] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.136625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.136779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.136911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.137040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.137648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.137783] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.137798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.137917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.138621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.138732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.139412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.139941] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.139946] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.140055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.166282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.166288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.166400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.166627] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.168203] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.168338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.170471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.194759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.199564] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.199698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.200159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.200296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.200314] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.200465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.200959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.201486] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.202034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.203174] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.204267] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.205027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.205179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.205312] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.205451] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.206033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.206171] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.206186] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.206307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.207390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.207510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.208190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.208714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.208719] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.208828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.232839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.232843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.232952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.233088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.234110] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.234226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.235426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.259856] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.264816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.264970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.265465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.265645] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.265665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.265793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.266266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.266789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.267343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.268612] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.269703] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.270453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.270605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.270737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.270865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.271456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.271595] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.271610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.271732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.272816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.272931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.273624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.274117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.274122] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.274233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.300453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.300458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.300584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.300722] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.302222] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.302339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.304790] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.329193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.333482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.333603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.334064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.334200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.334217] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.334334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.334838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.335321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.335895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.336999] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.338089] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.338835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.339053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.339247] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.339455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.340100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.340252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.340267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.340390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.341491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.341605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.342291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.342812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.342817] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.342929] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.368598] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.368603] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.368712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.368849] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.369869] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.369980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.371318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.395710] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.400562] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.400716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.401186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.401334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.401353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.401508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.402014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.402545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.403096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.404327] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.405408] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.406046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.406199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.406332] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.406486] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.407065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.407201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.407216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.407334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.408466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.409016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.409759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.410207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.410211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.410320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.437106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.437111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.437220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.437356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.438376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.438516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.439902] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.464311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.469841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.469961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.470437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.470623] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.470641] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.470761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.471223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.471751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.472300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.473454] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.474453] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.475209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.475361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.475506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.475636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.476217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.476356] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.476371] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.476507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.477595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.477710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.478390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.478902] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.478906] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.479017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.504730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.504734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.504841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.504977] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.506467] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.506584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.507947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.532311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.537227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.537319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.537825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.537964] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.537982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.538102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.538573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.539079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.539677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.540784] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.541872] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.542618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.542779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.542909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.543034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.543651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.543816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.543831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.543952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.545017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.545132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.545828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.546326] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.546331] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.546448] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.572666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.572670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.572792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.572928] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.574416] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.574534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.575896] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.600291] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.603892] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.604007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.604492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.604679] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.604699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.604828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.605301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.605831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.606377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.607458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.608414] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.609191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.609343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.609488] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.609618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.610200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.610337] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.610352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.610479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.611553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.611667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.612350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.612853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.612859] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.612969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.640263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.640267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.640375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.640534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.642051] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.642163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.643473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.667865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.671447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.671561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.672035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.672184] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.672203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.672331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.672845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.673329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.673918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.675038] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.676171] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.676964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.677128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.677258] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.677384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.677986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.678135] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.678149] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.678268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.679391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.679510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.680183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.680738] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.680743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.680864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.707088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.707092] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.707200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.707336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.708343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.708484] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.709864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.734214] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.739257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.739383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.739903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.740067] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.740087] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.740216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.740696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.741204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.741773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.743069] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.744155] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.744918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.745070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.745202] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.745331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.745926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.746066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.746081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.746202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.747268] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.747381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.748077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.748599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.748604] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.748715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.774965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.774969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.775078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.775214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.776234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.776360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.778794] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.803179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.807889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.808043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.808542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.808723] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.808743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.808871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.809344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.809874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.810429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.811459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.812406] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.813039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.813191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.813324] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.813467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.814050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.814189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.814203] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.814324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.815399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.815522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.816203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.816730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.816735] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.816846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.841401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.841405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.841521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.841705] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.843184] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.843301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.845741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.870127] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.874491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.874612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.875072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.875207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.875224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.875341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.875844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.876326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.876901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.878012] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.878947] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.879706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.879858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.879991] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.880119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.880713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.880852] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.880867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.880987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.882064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.882179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.882870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.883354] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.883359] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.883477] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.909694] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.909698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.909821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.909957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.910979] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.911092] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.912446] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [100.936844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [100.941777] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [100.941906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.942380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.942541] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [100.942588] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.942730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.943203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.943736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.944279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.945458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.946415] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.947222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.947374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.947529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.947656] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.948234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.948370] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [100.948384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.948510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.949621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.949732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.950718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.951178] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.951183] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.951290] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.976986] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.976992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.977152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.977352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [100.978936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [100.979096] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.980478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.004892] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.008500] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.008615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.009090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.009239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.009259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.009388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.009902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.010387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.010961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.012093] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.013155] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.013918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.014070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.014203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.014332] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.014929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.015068] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.015083] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.015205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.016270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.016384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.017090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.017593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.017599] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.017709] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.042300] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.042307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.042553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.042777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.044311] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.044494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.045914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.070302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.075775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.075930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.076402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.076574] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.076612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.076754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.077227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.077749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.078303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.079459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.080453] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.081215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.081366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.081523] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.081685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.082263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.082399] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.082414] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.082542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.083688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.083800] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.085248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.085808] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.085813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.085958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.112204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.112211] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.112375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.112626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.114196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.114308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.116762] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.141166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.145513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.145670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.146243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.146513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.146543] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.146755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.147324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.147866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.148449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.149741] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.150468] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.151010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.151268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.151520] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.151745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.152440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.152681] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.152707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.152918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.154101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.154300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.155106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.155666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.155675] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.155867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.181113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.181120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.181281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.181453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.182479] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.182594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.183965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.208356] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.213838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.213993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.214475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.214671] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.214690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.214819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.215290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.215820] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.216367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.217637] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.218727] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.219453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.219604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.219737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.219866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.220454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.220593] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.220608] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.220729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.221814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.221928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.222621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.223114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.223119] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.223230] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.250009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.250029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.250143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.250310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.251347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.251496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.252881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.277230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.282157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.282284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.282802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.282953] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.282972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.283101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.283580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.284088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.284658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.285785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.286876] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.287619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.287780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.287909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.288035] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.288625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.288798] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.288812] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.288930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.290003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.290113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.291296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.291859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.291863] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.292008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.320375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.320380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.320509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.320695] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.322175] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.322291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.324765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.349173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.353494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.353615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.354072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.354208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.354225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.354341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.354845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.355328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.355902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.357004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.358093] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.358825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.358976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.359110] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.359239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.359833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.359972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.359987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.360108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.361180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.361329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.362090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.362625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.362632] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.362799] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.387462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.387467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.387578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.387716] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.389214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.389327] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.391791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.416196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.420895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.421049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.421547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.421729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.421749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.421879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.422351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.422881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.423436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.424458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.425435] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.426125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.426287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.426433] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.426572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.427151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.427286] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.427301] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.427432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.428544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.428656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.429338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.429851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.429856] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.429965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.456727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.456732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.456854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.456990] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [101.458519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.458636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.459999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [101.484400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [101.489394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [101.489524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.490030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.490224] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.490249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.490450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.491005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.491532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.492084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.493185] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.494273] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.495036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.495187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.495320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.495467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.496049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.496188] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.496203] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.496324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.497410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.497531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.498226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.498729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.498733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.498845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<6> [101.499645] [IGT] i915_pm_rpm: exiting, ret=77
<6> [101.501670] Console: switching to colour frame buffer device 128x48
<7> [101.523959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.523966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.524104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.524484] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.524533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [101.524671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.525132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.525267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [101.525355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [101.525535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.526004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.526534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.527086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.528185] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [101.528980] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [101.529740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.529892] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.530024] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.530152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.530758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.530949] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [101.530964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [101.531081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.532154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.532264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [101.532928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [101.533480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.533484] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [101.533605] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [101.559784] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [101.559789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [101.559925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.560056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [101.560213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.560359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.560858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.561469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.561606] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.561731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.562310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2023-07-17 00:31:04