igt@i915_pm_rpm@module-reload on fi-kbl-soraka@linus-v6.5-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gfaa966f69 (x86_64) (Linux: 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_power_domains_init_hw+0x64/0x550 [i915] intel_display_driver_probe_noirq+0x9a/0x320 [i915] i915_driver_probe+0x722/0xcf0 [i915] i915_pci_probe+0xdc/0x210 [i915] pci_device_probe+0x95/0x120 really_probe+0x164/0x3c0 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x38/0x120 [i915] hsw_get_pipe_config+0x150/0xb30 [i915] intel_crtc_get_pipe_config+0x1f/0x50 [i915] intel_modeset_verify_crtc+0xc7/0x4e0 [i915] intel_atomic_commit_tail+0x7b5/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_power_domains_init_hw+0x64/0x550 [i915] intel_display_driver_probe_noirq+0x9a/0x320 [i915] i915_driver_probe+0x722/0xcf0 [i915] i915_pci_probe+0xdc/0x210 [i915] pci_device_probe+0x95/0x120 really_probe+0x164/0x3c0 Wakeref count: 2 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_pps_vdd_on_unlocked+0xc3/0x320 [i915] intel_dp_aux_xfer+0x101/0x6b0 [i915] intel_dp_aux_transfer+0x1dc/0x2a0 [i915] drm_dp_dpcd_access+0x6a/0x130 [drm_display_helper] drm_dp_dpcd_probe+0x39/0xf0 [drm_display_helper] drm_dp_dpcd_read+0xc0/0x100 [drm_display_helper] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] snd_hdac_display_power+0x7d/0x120 [snd_hda_core] azx_probe_work+0x9e/0x914 [snd_hda_intel] process_one_work+0x24e/0x500 worker_thread+0x4f/0x3a0 kthread+0xff/0x130 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_power_domains_init_hw+0x64/0x550 [i915] intel_display_driver_probe_noirq+0x9a/0x320 [i915] i915_driver_probe+0x722/0xcf0 [i915] i915_pci_probe+0xdc/0x210 [i915] pci_device_probe+0x95/0x120 really_probe+0x164/0x3c0 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_pps_vdd_on_unlocked+0xc3/0x320 [i915] intel_dp_aux_xfer+0x101/0x6b0 [i915] intel_dp_aux_transfer+0x1dc/0x2a0 [i915] drm_dp_dpcd_access+0x6a/0x130 [drm_display_helper] drm_dp_dpcd_probe+0x39/0xf0 [drm_display_helper] drm_dp_dpcd_read+0xc0/0x100 [drm_display_helper] Subtest module-reload: SUCCESS (32.940s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (32.940s)
Dmesg	<6> [779.955092] Console: switching to colour dummy device 80x25 <6> [779.962609] [IGT] i915_pm_rpm: executing <7> [780.046722] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [780.052879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [780.053114] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [780.055417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [780.058789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [780.062566] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [780.064664] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f <7> [780.071608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [780.072976] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [780.074283] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [780.075743] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [780.077566] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [780.077643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [780.077705] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [780.077934] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [780.079747] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [780.083687] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [780.085498] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [780.091513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [780.091715] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [780.094830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [780.095051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [780.099247] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [780.101823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [780.102036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [780.156743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [780.172108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [780.172186] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [780.175852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [780.190573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [780.190656] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [780.192871] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [780.194301] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [780.194582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [780.196724] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [780.198191] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [780.198461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [780.252531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [780.266907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [780.266983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [780.268850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [780.282277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [780.282436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [780.284322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [780.285842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [780.286047] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [780.288108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [780.289974] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [780.290180] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [780.342515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [780.357008] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [780.357100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [780.359269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [780.373923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [780.373985] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [780.376249] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [780.436774] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [780.436942] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [780.438623] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [780.449585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [780.449802] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [780.503614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [780.514587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [780.514643] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [780.515925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [780.529966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [780.530027] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [780.531558] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [780.541691] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [780.541916] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [780.544157] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [780.551937] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [780.552093] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [780.605637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [780.617940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [780.618020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [780.619897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [780.635191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [780.635254] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [780.636738] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [780.645522] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [780.645741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [780.647267] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [780.655095] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [780.655248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [780.708560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [780.723175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [780.723236] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [780.724550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [780.738252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [780.738312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [780.739829] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [780.748095] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [780.748316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [780.751658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [780.752967] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [780.755168] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [780.757518] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [780.759649] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [780.759728] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [780.759788] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [780.760039] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [780.761996] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [780.765147] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [780.766693] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [780.770123] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [780.770262] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [780.770670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [780.770869] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [780.772695] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [780.773145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [780.773494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [780.827163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [780.837940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [780.837998] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [780.839248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [780.853270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [780.853419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [780.855604] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [780.856107] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [780.856291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [780.858302] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [780.858825] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [780.859015] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [780.912587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [780.923278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [780.923417] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [780.924746] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [780.938239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [780.938297] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [780.940044] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [780.940576] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [780.940767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [780.942269] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [780.942704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [780.942828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [780.995589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [781.006136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [781.006193] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [781.007490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [781.020819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [781.020877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [781.022288] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [781.026139] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:140] <7> [782.477703] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [782.478485] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [782.480479] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [782.481987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [782.483985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [782.485500] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5889501/8388608 link 490791/524288, found tu 0, data 0/0 link 0/0) <7> [782.487427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [782.488886] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [782.490728] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2400, found 0) <7> [782.492162] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2560, found 0) <7> [782.494067] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2400, found 0) <7> [782.495607] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2560, found 0) <7> [782.497522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2448, found 0) <7> [782.498989] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2480, found 0) <7> [782.500586] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0) <7> [782.502002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1646, found 0) <7> [782.503877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0) <7> [782.505427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1646, found 0) <7> [782.507403] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1603, found 0) <7> [782.509160] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1613, found 0) <7> [782.510644] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2400, found 0) <7> [782.512464] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2560, found 0) <7> [782.513857] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2400, found 0) <7> [782.515646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2560, found 0) <7> [782.517101] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2448, found 0) <7> [782.518943] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2480, found 0) <7> [782.520508] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0) <7> [782.522403] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1646, found 0) <7> [782.523817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0) <7> [782.525519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1646, found 0) <7> [782.527225] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1603, found 0) <7> [782.529222] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1613, found 0) <7> [782.530748] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [782.532193] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [782.533733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [782.535189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [782.536622] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 252750, found 0) <7> [782.538077] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 252750, found 0) <7> [782.539514] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 270000, found 0) <7> [782.540981] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [782.542489] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0 <7> [782.544194] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [782.546032] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [782.547470] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [782.548902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [782.550236] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [782.551738] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [782.553104] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [782.554793] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [782.556270] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [782.557756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [782.559209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [782.560700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [782.562138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [782.564872] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [782.580640] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [782.786671] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0 <7> [782.789228] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [782.811140] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off <7> [782.812667] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time <7> [782.814051] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [782.863627] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [782.865255] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [782.866676] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [782.868363] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [782.870914] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [782.872916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [782.876993] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [782.880008] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [782.882050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A] <7> [782.886020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B] <7> [782.887970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A] <7> [782.890063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B] <7> [782.892008] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C] <7> [782.893925] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C] <7> [782.895831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [782.897705] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [782.899601] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [782.901473] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D] <7> [782.903090] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [782.904913] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [782.906851] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [782.908779] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] <7> [782.910914] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [782.912985] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [782.915057] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [782.917114] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [782.919572] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [782.923917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [782.926008] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [782.928085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [782.932284] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [782.934190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [782.936645] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [782.939314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [782.941499] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [782.943518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [782.946850] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [782.948698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [782.950977] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [782.953677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [782.955728] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [782.957252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [783.025708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [783.031409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [783.042792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [783.084114] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [783.086128] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 270000 max bpp 24 pixel clock 252750KHz <7> [783.087601] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 270000 bpp 24 <7> [783.089551] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 758250 available 1080000 <7> [783.091521] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:95:eDP-1] SDP split enable: no <7> [783.093436] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [783.095535] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:94:DDI A/PHY A] [CRTC:51:pipe A] <7> [783.097944] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [783.100062] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [783.102102] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [783.104226] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [783.106901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5889501/8388608 link 490791/524288) <7> [783.109706] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [783.111972] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [783.114310] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2400) <7> [783.116606] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2560) <7> [783.118909] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2400) <7> [783.120935] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2560) <7> [783.122886] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2448) <7> [783.124947] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2480) <7> [783.126980] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600) <7> [783.129738] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1646) <7> [783.131650] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600) <7> [783.133935] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1646) <7> [783.136025] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1603) <7> [783.138109] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1613) <7> [783.140146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2400) <7> [783.142202] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2560) <7> [783.144216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2400) <7> [783.146593] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2560) <7> [783.148532] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2448) <7> [783.150239] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2480) <7> [783.152265] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600) <7> [783.154297] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1646) <7> [783.156249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600) <7> [783.158297] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1646) <7> [783.160287] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1603) <7> [783.162284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1613) <7> [783.164313] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [783.166446] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [783.168494] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [783.170498] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [783.172519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 252750) <7> [783.174512] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 252750) <7> [783.176547] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 270000) <7> [783.178560] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [783.180984] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [783.183146] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [783.185093] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [783.186995] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [783.188935] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 <7> [783.190905] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 <7> [783.192867] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 <7> [783.195033] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (252750 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz) <7> [783.197106] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (15797 kHz) > old min cdclk (0 kHz) <7> [783.199157] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [783.201193] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [783.203202] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 <7> [783.205200] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 0 <7> [783.207186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset] <7> [783.209201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [783.211182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [783.213215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [783.215255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [783.217307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [783.219307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [783.221428] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 5889501, data_n: 8388608, link_m: 490791, link_n: 524288, tu: 64 <7> [783.223499] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [783.225512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [783.227485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [783.229506] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7> [783.229562] i915 0000:00:02.0: pixelformat: RGB <7> [783.229609] i915 0000:00:02.0: colorimetry: sRGB <7> [783.229654] i915 0000:00:02.0: bpc: 0 <7> [783.229698] i915 0000:00:02.0: dynamic range: VESA range <7> [783.229744] i915 0000:00:02.0: content type: Not defined <7> [783.229791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [783.231837] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [783.233834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [783.235805] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa <7> [783.237878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x40 0xa <7> [783.239902] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa <7> [783.241954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 270000, pipe src: 2400x1600+0+0, pixel rate 252750 <7> [783.243947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 82, ips linetime: 0 <7> [783.245983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [783.247964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [783.249988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [783.251993] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 <7> [783.254033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [783.256042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [783.258045] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [783.260050] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [783.262586] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [783.264548] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [783.266542] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [783.268600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:96] 2400x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [783.270693] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [783.272997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2400.000000x1600.000000+0.000000+0.000000 dst: 2400x1600+0+0 <7> [783.275008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [783.277079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [783.292032] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [783.314196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [783.318893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [783.320938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [783.323597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [783.327641] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A] <7> [783.329555] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B] <7> [783.331042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A] <7> [783.332983] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B] <7> [783.334945] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C] <7> [783.336905] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C] <7> [783.338831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [783.340779] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [783.342691] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [783.344621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D] <7> [783.346531] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [783.348543] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [783.350469] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [783.352484] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [783.354642] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [783.356796] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [783.358962] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [783.361516] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:51:pipe A] <7> [783.363562] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [783.366486] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power on <7> [783.368986] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [783.481842] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [783.483793] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [783.485739] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power on <7> [783.487771] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [783.548783] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [783.550239] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [783.551551] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [783.553180] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [783.686585] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [783.688097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [783.690171] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [783.695080] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [783.697135] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [783.706849] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00 <7> [783.708259] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using LINK_BW_SET value 0a <7> [783.711811] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [783.713716] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [783.715709] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [783.723325] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Clock recovery OK <7> [783.724810] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [783.729608] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 1/1/1/1 <7> [783.731501] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 1/1/1/1 <7> [783.733491] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 01000000 <7> [783.738967] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 2/2/2/2 <7> [783.740799] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 2/2/2/2 <7> [783.742745] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 02000000 <7> [783.748310] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 0/0/0/0 <7> [783.749664] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [783.751150] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [783.756945] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [783.758316] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [783.761433] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [783.764917] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [783.766416] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [783.768866] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 100 <7> [783.780639] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [783.790401] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] <7> [783.791909] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [783.795059] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [783.800074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <6> [783.808866] [IGT] i915_pm_rpm: starting subtest module-reload <7> [783.809090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [783.811278] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [783.814675] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [783.816963] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [783.820299] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [783.820497] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [783.820570] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [783.820966] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [783.824243] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [783.829805] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [783.831692] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [783.836810] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 1 <7> [783.837125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [783.841019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1 <7> [783.841268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [783.895508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [783.914595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [783.914681] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [783.916981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [783.932904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [783.932991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [783.936039] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [783.936289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [783.939750] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [783.939993] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [783.994515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [784.010423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [784.010505] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [784.012480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [784.028497] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [784.028582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [784.031617] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1 <7> [784.031866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [784.035272] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1 <7> [784.036880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [784.091552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [784.110273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [784.110445] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [784.113561] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [784.129208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [784.129296] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [784.132924] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1 <7> [784.377183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [784.381309] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [784.398119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [784.429029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [784.431169] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [784.446615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [784.593055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [784.608455] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [784.633054] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [784.635203] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [784.642535] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [784.645880] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [784.649191] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [784.656276] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [784.662587] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [784.668291] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [784.675655] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [784.683503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [785.048106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [785.050549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [785.052764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [785.055237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [785.070040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [785.072086] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [785.075555] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [785.078754] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [785.081978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5889501/8388608 link 490791/524288, found tu 0, data 0/0 link 0/0) <7> [785.085169] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [785.088602] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [785.092087] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2400, found 0) <7> [785.095612] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2560, found 0) <7> [785.099100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2400, found 0) <7> [785.102450] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2560, found 0) <7> [785.104495] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2448, found 0) <7> [785.106492] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2480, found 0) <7> [785.108501] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0) <7> [785.110475] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1646, found 0) <7> [785.112459] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0) <7> [785.114429] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1646, found 0) <7> [785.117250] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1603, found 0) <7> [785.119473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1613, found 0) <7> [785.121731] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2400, found 0) <7> [785.123493] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2560, found 0) <7> [785.131686] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2400, found 0) <7> [785.135325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2560, found 0) <7> [785.136796] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2448, found 0) <7> [785.139027] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2480, found 0) <7> [785.140485] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0) <7> [785.142177] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1646, found 0) <7> [785.143542] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0) <7> [785.145447] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1646, found 0) <7> [785.146802] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1603, found 0) <7> [785.148948] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1613, found 0) <7> [785.150322] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [785.152618] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [785.153987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [785.155673] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [785.157028] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 252750, found 0) <7> [785.159468] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 252750, found 0) <7> [785.161473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 270000, found 0) <7> [785.164041] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [785.165865] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0 <7> [785.167765] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [785.170578] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [785.172036] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [785.173553] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [785.175283] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [785.176681] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [785.178465] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [785.180157] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [785.182084] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [785.183617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [785.185586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [785.187083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [785.188939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [785.191815] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [785.200313] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [785.409695] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0 <7> [785.413781] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [785.438940] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off <7> [785.440625] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time <7> [785.442572] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [785.491603] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [785.493079] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [785.493916] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [785.494894] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [785.496490] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [785.496724] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [785.498645] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A] <7> [785.498889] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [785.500695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B] <7> [785.502280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A] <7> [785.503719] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B] <7> [785.505022] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C] <7> [785.506466] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C] <7> [785.507772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [785.509260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [785.510712] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [785.512497] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D] <7> [785.514637] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [785.516036] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [785.518268] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [785.520212] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] <7> [785.522491] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [785.524915] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [785.526496] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [785.528445] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [785.530729] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [785.573630] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [786.058847] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [786.060937] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [786.094778] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [786.096690] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [787.799712] [IGT] Reloading i915 w/o display <7> [789.884866] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [789.886905] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [789.889175] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [789.891531] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [789.894847] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [789.896811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [789.903605] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [789.905478] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [789.907317] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [789.909133] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [789.909195] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [789.914745] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [789.914934] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [789.916471] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [789.921281] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7aaa68c0 <7> [789.923744] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [789.925919] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [789.928033] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [789.929936] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [789.932050] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [789.934563] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: LPDDR3 <7> [789.936428] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no <7> [789.938418] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [789.939955] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [789.941077] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no <7> [789.942723] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [789.944415] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [789.946016] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [789.947611] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [789.949189] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [789.955117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [789.957498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212 <7> [789.959897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [789.962252] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [789.964629] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [789.967000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [789.969464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [789.971808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [789.974172] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [789.976538] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [789.978922] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [789.981263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 22, min size 78) <7> [789.983582] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [789.985864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [789.988181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [789.990561] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [789.992941] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [789.995294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [789.997643] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [789.999755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [790.002047] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [790.004414] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0 <7> [790.006655] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [790.008912] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0 <7> [790.011312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [790.013670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [790.015954] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [790.018272] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [790.020716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [790.023673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [790.026197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [790.028595] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [790.030906] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [790.033202] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [790.035503] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [790.038545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [790.040702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [790.043963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [790.046922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [790.050284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [790.052993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [790.060016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [790.062959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [790.066556] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [790.078876] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [790.082044] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [790.088082] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [790.091105] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [790.093311] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [790.095516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [790.097534] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [790.099267] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [790.101273] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [790.102984] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [790.104938] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [790.106593] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [790.136979] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [790.173491] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [790.177106] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [790.180867] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [790.183225] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [790.186815] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [790.188848] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [790.191029] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [790.193012] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [790.195286] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [790.197274] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [790.199468] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [790.201196] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 25000 Hz, active high, min brightness 0, level 255, controller 0 <7> [790.203427] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [790.205734] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [790.207929] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [790.209452] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [790.211526] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [790.213080] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [790.214973] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [790.217146] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [790.221406] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [790.223080] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [790.224944] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [790.226824] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [790.228579] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [790.230496] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [790.437519] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00 <7> [790.439223] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-60-ad dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [790.441054] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 bb ff <7> [790.444515] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [790.468166] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [790.468233] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [790.468277] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [790.468947] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using preferred EDID fixed mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [790.470953] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:95:eDP-1] Performing OUI wait (30 ms) <7> [790.483500] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:95:eDP-1] DRRS type: none <7> [790.485849] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:95:eDP-1] Using native PCH PWM for backlight control <7> [790.487902] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:95:eDP-1] backlight initialized, disabled, brightness 0/100 <7> [790.490263] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [790.492081] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [790.493635] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [790.495896] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [790.497474] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [790.499661] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [790.503702] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:102:DDI B/PHY B] using AUX B (VBT) <7> [790.505538] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B] <7> [790.510895] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [790.512597] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B] <7> [790.514067] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:102:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [790.518248] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI C/PHY C] using AUX C (platform default) <7> [790.520811] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI C/PHY C] <7> [790.527831] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [790.530088] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI C/PHY C] <7> [790.532214] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [790.535846] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI D/PHY D] using AUX D (VBT) <7> [790.538281] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI D/PHY D] <7> [790.543454] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [790.545178] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI D/PHY D] <7> [790.546743] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [790.549983] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present <7> [790.555175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [790.558514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [790.561648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [790.564043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [790.566215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [790.568145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [790.570197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [790.572326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [790.574689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [790.577042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [790.579463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [790.581815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [790.584184] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A <7> [790.586608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A <7> [790.588840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A <7> [790.590681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B <7> [790.592788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C <7> [790.595040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI C/PHY C] hw state readout: disabled, pipe A <7> [790.597079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A <7> [790.598747] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B <7> [790.600854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C <7> [790.602585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI D/PHY D] hw state readout: disabled, pipe A <7> [790.604492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A <7> [790.606088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B <7> [790.608099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C <7> [790.609948] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [790.611912] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [790.613889] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [790.616192] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [790.619097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled <7> [790.621998] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled <7> [790.624516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [790.626927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled <7> [790.629478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:125:HDMI-A-2] hw state readout: disabled <7> [790.631921] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-3] hw state readout: disabled <7> [790.634829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-3] hw state readout: disabled <7> [790.636505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [790.639028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [790.641015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [790.642774] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [790.645118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [790.647439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [790.649634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [790.651813] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [790.654167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [790.656182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [790.660456] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [790.662658] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [790.666540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [790.668842] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [790.671136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [790.673525] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [790.675702] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [790.677699] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [790.679287] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [790.681760] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [790.683411] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [790.684863] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [790.686977] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [790.699749] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [790.701465] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [790.703598] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [790.721240] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7> [790.729986] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7> [790.737816] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7> [790.878772] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [790.881804] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [790.883808] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [790.885430] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [790.887321] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [790.889234] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [790.895128] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [790.896482] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [790.897748] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [790.899494] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [790.982871] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:95:eDP-1] backlight device intel_backlight registered <7> [790.987208] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [791.000091] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:eDP-1] generating connector hotplug event <7> [791.007267] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [791.017225] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:103:DP-1] generating connector hotplug event <7> [791.022892] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <7> [791.028171] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [791.046745] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event <7> [791.052782] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:125:HDMI-A-2] generating connector hotplug event <7> [791.060523] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-3 <7> [791.074065] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-3] generating connector hotplug event <7> [791.088997] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-3] generating connector hotplug event <6> [791.090109] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [791.130213] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6> [791.140732] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [791.149966] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 <7> [791.157539] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [791.166760] [drm:drm_client_modeset_probe] <7> [791.166318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [791.168838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [791.170625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [791.171142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [791.171149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [791.173505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [791.175169] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] status updated from unknown to disconnected <7> [791.175799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [791.182871] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [791.185143] i915 device info: pciid=0x591e rev=0x02 platform=KABYLAKE (subplatform=0x2) gen=9 <7> [791.185197] i915 device info: graphics version: 9 <7> [791.185233] i915 device info: media version: 9 <7> [791.185265] i915 device info: display version: 9 <7> [791.185297] i915 device info: graphics stepping: C0 <7> [791.185411] i915 device info: media stepping: C0 <7> [791.185444] i915 device info: display stepping: B0 <7> [791.185475] i915 device info: base die stepping: <7> [791.185503] i915 device info: gt: 2 <7> [791.185533] i915 device info: memory-regions: 0x21 <7> [791.185560] i915 device info: page-sizes: 0x11000 <7> [791.185592] i915 device info: platform: KABYLAKE <7> [791.185622] i915 device info: ppgtt-size: 48 <7> [791.185654] i915 device info: ppgtt-type: 2 <7> [791.185684] i915 device info: dma_mask_size: 39 <7> [791.185716] i915 device info: is_mobile: no <7> [791.185748] i915 device info: is_lp: no <7> [791.185779] i915 device info: require_force_probe: no <7> [791.185810] i915 device info: is_dgfx: no <7> [791.185840] i915 device info: has_64bit_reloc: yes <7> [791.185871] i915 device info: has_64k_pages: no <7> [791.185903] i915 device info: gpu_reset_clobbers_display: no <7> [791.185935] i915 device info: has_reset_engine: yes <7> [791.185967] i915 device info: has_3d_pipeline: yes <7> [791.185998] i915 device info: has_4tile: no <7> [791.186029] i915 device info: has_flat_ccs: no <7> [791.186059] i915 device info: has_global_mocs: no <7> [791.186091] i915 device info: has_gmd_id: no <7> [791.186121] i915 device info: has_gt_uc: yes <7> [791.186152] i915 device info: has_heci_pxp: no <7> [791.186184] i915 device info: has_heci_gscfi: no <7> [791.186216] i915 device info: has_guc_deprivilege: no <7> [791.186248] i915 device info: has_l3_ccs_read: no <7> [791.186279] i915 device info: has_l3_dpf: no <7> [791.186310] i915 device info: has_llc: yes <7> [791.186414] i915 device info: has_logical_ring_contexts: yes <7> [791.186448] i915 device info: has_logical_ring_elsq: no <7> [791.186479] i915 device info: has_media_ratio_mode: no <7> [791.186511] i915 device info: has_mslice_steering: no <7> [791.186543] i915 device info: has_oa_bpc_reporting: no <7> [791.186573] i915 device info: has_oa_slice_contrib_limits: no <7> [791.186604] i915 device info: has_oam: no <7> [791.186637] i915 device info: has_one_eu_per_fuse_bit: no <7> [791.186669] i915 device info: has_pxp: no <7> [791.186699] i915 device info: has_rc6: yes <7> [791.186729] i915 device info: has_rc6p: no <7> [791.186760] i915 device info: has_rps: yes <7> [791.186792] i915 device info: has_runtime_pm: yes <7> [791.186824] i915 device info: has_snoop: no <7> [791.186855] i915 device info: has_coherent_ggtt: yes <7> [791.186887] i915 device info: tuning_thread_rr_after_dep: no <7> [791.186918] i915 device info: unfenced_needs_alignment: no <7> [791.186949] i915 device info: hws_needs_physical: no <7> [791.186982] i915 device info: has_pooled_eu: no <7> [791.187012] i915 device info: cursor_needs_physical: no <7> [791.187044] i915 device info: has_cdclk_crawl: no <7> [791.187075] i915 device info: has_cdclk_squash: no <7> [791.187106] i915 device info: has_ddi: yes <7> [791.187138] i915 device info: has_dp_mst: yes <7> [791.187170] i915 device info: has_dsb: no <7> [791.187201] i915 device info: has_fpga_dbg: yes <7> [791.187233] i915 device info: has_gmch: no <7> [791.187263] i915 device info: has_hotplug: yes <7> [791.187294] i915 device info: has_hti: no <7> [791.187325] i915 device info: has_ipc: yes <7> [791.187420] i915 device info: has_overlay: no <7> [791.187452] i915 device info: has_psr: yes <7> [791.187482] i915 device info: has_psr_hw_tracking: yes <7> [791.187514] i915 device info: overlay_needs_physical: no <7> [791.187544] i915 device info: supports_tv: no <7> [791.187576] i915 device info: has_hdcp: yes <7> [791.187607] i915 device info: has_dmc: yes <7> [791.187637] i915 device info: has_dsc: no <7> [791.187667] i915 device info: rawclk rate: 24000 kHz <7> [791.187704] i915 device info: iommu: enabled <7> [791.187735] i915 device info: available engines: 40403 <7> [791.187769] i915 device info: slice total: 1, mask=0001 <7> [791.187804] i915 device info: subslice total: 3 <7> [791.187834] i915 device info: slice0: 3 subslices, mask=00000007 <7> [791.187872] i915 device info: slice1: 0 subslices, mask=00000000 <7> [791.187907] i915 device info: slice2: 0 subslices, mask=00000000 <7> [791.187937] i915 device info: EU total: 24 <7> [791.187969] i915 device info: EU per subslice: 8 <7> [791.187999] i915 device info: has slice power gating: no <7> [791.188031] i915 device info: has subslice power gating: no <7> [791.188061] i915 device info: has EU power gating: yes <6> [791.188095] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [791.188132] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [791.188166] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [791.192861] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] disconnected <7> [791.193099] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:95:eDP-1] EDID changed, epoch counter 2 <7> [791.207020] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [791.207264] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [791.213670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] status updated from unknown to disconnected <7> [791.213977] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [791.214245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [791.215909] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [791.225501] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [791.225839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [791.226115] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [791.226322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [791.230030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to disconnected <7> [791.231759] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [791.231999] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [791.232233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [791.236520] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] status updated from unknown to disconnected <7> [791.236849] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [791.237120] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [791.238754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [791.240960] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] status updated from unknown to disconnected <7> [791.241284] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [791.249539] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [791.249768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [791.253190] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] status updated from unknown to disconnected <7> [791.254780] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [791.255059] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [791.255168] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [791.255222] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [791.255272] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [791.255318] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [791.256859] [drm:drm_client_modeset_probe] connector 125 enabled? no <7> [791.256911] [drm:drm_client_modeset_probe] connector 129 enabled? no <7> [791.256958] [drm:drm_client_modeset_probe] connector 135 enabled? no <7> [791.261164] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [791.262688] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [791.263066] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [791.264704] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [791.294509] [drm:drm_client_modeset_probe] <7> [791.297941] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [791.298542] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [791.301936] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] disconnected <7> [791.302159] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [791.303753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [791.306835] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [791.307022] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [791.307188] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [791.310488] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [791.310706] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [791.310907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [791.314802] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [791.315019] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [791.315226] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [791.318548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [791.318756] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [791.318951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [791.328514] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [791.328737] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [791.328939] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [791.332079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [791.332287] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [791.333827] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [791.333892] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [791.333941] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [791.333986] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [791.334031] [drm:drm_client_modeset_probe] connector 125 enabled? no <7> [791.334076] [drm:drm_client_modeset_probe] connector 129 enabled? no <7> [791.334120] [drm:drm_client_modeset_probe] connector 135 enabled? no <7> [791.337689] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [791.337926] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [791.338313] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [791.340073] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [791.342474] [drm:drm_client_modeset_probe] <7> [791.345274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [791.345924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [791.353879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] disconnected <7> [791.354108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [791.354320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [791.357814] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [791.358029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [791.358230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [791.360634] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [791.360851] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [791.361056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [791.365974] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [791.366200] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [791.366879] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [791.369070] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [791.369279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [791.369983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [791.372279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [791.372914] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [791.373120] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [791.376482] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [791.376711] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [791.376773] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [791.376825] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [791.376875] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [791.376923] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [791.376972] [drm:drm_client_modeset_probe] connector 125 enabled? no <7> [791.377019] [drm:drm_client_modeset_probe] connector 129 enabled? no <7> [791.377066] [drm:drm_client_modeset_probe] connector 135 enabled? no <6> [791.377191] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7> [791.378559] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [791.378729] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [791.379059] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [791.379325] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [791.452323] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [791.454266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [791.462463] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [791.470026] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [791.675857] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [791.681610] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [791.690583] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [791.692706] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [791.694832] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [791.697083] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [791.709514] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [791.712074] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [791.714128] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <6> [791.919124] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 <6> [791.937626] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 <6> [792.121571] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 <7> [793.475559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [793.551739] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [793.553678] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [793.555937] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [793.556586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [793.557899] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [793.559123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [793.559913] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [793.560752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [793.563280] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [793.563399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [793.569586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [793.579006] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [793.759823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [793.779885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [793.780578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [793.782507] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 2 <7> [793.782791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [793.785658] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1 <7> [793.785317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [793.785895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [793.788230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [793.788926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [793.791536] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [793.791771] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [793.792322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [793.793574] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1 <7> [793.793799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [793.795606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1 <7> [793.795835] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [793.798565] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1 <7> [793.798264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [793.801195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [793.803845] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [793.819256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [793.821268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [793.823162] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [793.824987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [793.827563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [794.614726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [794.616579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [794.621179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [794.625071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [794.630543] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [794.656705] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [794.659627] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [794.665120] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [794.668608] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [794.673723] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [794.677098] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [794.680766] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [794.683479] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [794.685219] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [794.692959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [794.696601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [794.698896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [794.700959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [794.705031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [794.878979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [794.880478] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [794.882805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [794.885195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [794.887735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [794.889689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [794.891640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [794.893633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [794.953123] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [795.402844] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [795.412552] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [795.415768] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [795.419126] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [797.022682] [IGT] Reloading i915 as normal <7> [798.762837] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [798.764844] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [798.767076] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [798.769316] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [798.772570] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [798.774610] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [798.781586] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [798.783445] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [798.785259] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [798.787040] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [798.787103] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [798.792063] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [798.792327] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [798.794429] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [798.799075] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7aaa68c0 <7> [798.801631] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [798.803765] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [798.805895] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [798.807994] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [798.810113] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [798.812241] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: LPDDR3 <7> [798.813980] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no <7> [798.815606] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [798.817022] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [798.818592] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no <7> [798.820280] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [798.821925] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [798.823930] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [798.825575] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [798.827538] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [798.833808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [798.836099] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212 <7> [798.838169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [798.840498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [798.842258] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [798.844446] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [798.846557] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [798.848219] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [798.850261] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [798.851977] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [798.854021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [798.855839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 22, min size 78) <7> [798.857878] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [798.859523] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [798.861464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [798.863197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [798.865212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [798.867515] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [798.869556] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [798.871479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [798.873305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [798.879308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0 <7> [798.881732] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [798.884007] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0 <7> [798.886605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [798.888834] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [798.891126] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [798.893471] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [798.895876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [798.898772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [798.901312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [798.903680] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [798.906003] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [798.908416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [798.910660] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [798.913694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [798.915896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [798.918208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [798.920705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [798.923689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [798.926051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [798.928458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [798.930770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [798.933601] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [798.944702] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [798.946035] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [798.952316] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [798.954467] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [798.956687] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [798.959219] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [798.961545] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [798.963706] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [798.965927] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [798.968194] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [798.970544] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [798.972727] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [799.019661] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [799.038600] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [799.042022] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [799.044470] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [799.047083] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [799.049473] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [799.051751] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [799.054174] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [799.056467] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [799.058804] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [799.061033] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [799.063397] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [799.065678] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 25000 Hz, active high, min brightness 0, level 255, controller 0 <7> [799.067979] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [799.070927] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [799.073121] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [799.075206] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [799.077434] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [799.079015] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [799.081015] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [799.083221] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [799.087445] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [799.089053] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [799.090991] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [799.092837] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [799.094582] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [799.096499] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [799.309496] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00 <7> [799.311148] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-60-ad dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [799.313006] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 bb ff <7> [799.316537] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [799.340052] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [799.340119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [799.340162] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [799.340763] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using preferred EDID fixed mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [799.342726] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:95:eDP-1] Performing OUI wait (30 ms) <7> [799.355042] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:95:eDP-1] DRRS type: none <7> [799.357131] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:95:eDP-1] Using native PCH PWM for backlight control <7> [799.358892] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:95:eDP-1] backlight initialized, disabled, brightness 0/100 <7> [799.361604] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [799.363495] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [799.365140] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [799.367071] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [799.368664] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [799.370633] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [799.374811] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:102:DDI B/PHY B] using AUX B (VBT) <7> [799.376606] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B] <7> [799.382288] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [799.385200] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B] <7> [799.387068] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:102:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [799.391285] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI C/PHY C] using AUX C (platform default) <7> [799.393035] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI C/PHY C] <7> [799.396987] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [799.398901] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI C/PHY C] <7> [799.400664] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [799.403552] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI D/PHY D] using AUX D (VBT) <7> [799.405626] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI D/PHY D] <7> [799.410030] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [799.411726] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI D/PHY D] <7> [799.413223] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [799.416593] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present <7> [799.421001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [799.422948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [799.425003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [799.427046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [799.428856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [799.430904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [799.433111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [799.435432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [799.437606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [799.439954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [799.442285] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [799.444638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [799.447001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A <7> [799.449477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A <7> [799.451560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A <7> [799.453750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B <7> [799.455835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C <7> [799.458036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI C/PHY C] hw state readout: disabled, pipe A <7> [799.460042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A <7> [799.461734] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B <7> [799.463731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C <7> [799.465595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI D/PHY D] hw state readout: disabled, pipe A <7> [799.467593] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A <7> [799.469184] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B <7> [799.471217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C <7> [799.473035] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [799.475145] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [799.477426] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [799.479734] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [799.482627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled <7> [799.485049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled <7> [799.487559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [799.489983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled <7> [799.492605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:125:HDMI-A-2] hw state readout: disabled <7> [799.495088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-3] hw state readout: disabled <7> [799.497506] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-3] hw state readout: disabled <7> [799.499726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [799.501675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [799.503736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [799.505449] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [799.507518] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [799.509221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [799.511152] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [799.512783] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [799.514870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [799.516661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [799.519205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [799.524809] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [799.528733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [799.531273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [799.533519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [799.535808] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [799.538071] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [799.540093] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [799.542075] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [799.544779] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [799.546697] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [799.548682] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [799.550920] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [799.565692] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [799.567287] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [799.568978] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [799.586100] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7> [799.594726] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7> [799.602223] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7> [799.743906] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [799.746920] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [799.748871] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [799.750472] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [799.752458] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [799.754414] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [799.760249] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [799.761700] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [799.762996] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [799.764702] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [799.825301] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:95:eDP-1] backlight device intel_backlight registered <7> [799.828738] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [799.844021] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:eDP-1] generating connector hotplug event <7> [799.851317] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [799.870108] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:103:DP-1] generating connector hotplug event <7> [799.880000] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <7> [799.887499] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [799.900866] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event <7> [799.907525] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:125:HDMI-A-2] generating connector hotplug event <7> [799.917300] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-3 <7> [799.927831] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-3] generating connector hotplug event <7> [799.935759] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-3] generating connector hotplug event <6> [799.936820] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [799.966847] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6> [799.977813] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [799.986554] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18 <7> [800.013985] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [800.024915] [drm:drm_client_modeset_probe] <7> [800.028676] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [800.029203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [800.039902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [800.042155] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [800.045864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [800.049895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [800.052209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [800.055847] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [800.059593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [800.061894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [800.065472] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [800.071088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [800.071185] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [800.071254] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [800.073959] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [800.076518] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [800.082708] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [800.089782] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [800.091979] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [800.096743] i915 device info: pciid=0x591e rev=0x02 platform=KABYLAKE (subplatform=0x2) gen=9 <7> [800.096801] i915 device info: graphics version: 9 <7> [800.096835] i915 device info: media version: 9 <7> [800.096867] i915 device info: display version: 9 <7> [800.096898] i915 device info: graphics stepping: C0 <7> [800.096929] i915 device info: media stepping: C0 <7> [800.096960] i915 device info: display stepping: B0 <7> [800.096990] i915 device info: base die stepping: <7> [800.097020] i915 device info: gt: 2 <7> [800.097051] i915 device info: memory-regions: 0x21 <7> [800.097083] i915 device info: page-sizes: 0x11000 <7> [800.097116] i915 device info: platform: KABYLAKE <7> [800.097146] i915 device info: ppgtt-size: 48 <7> [800.097175] i915 device info: ppgtt-type: 2 <7> [800.097206] i915 device info: dma_mask_size: 39 <7> [800.097237] i915 device info: is_mobile: no <7> [800.097267] i915 device info: is_lp: no <7> [800.097298] i915 device info: require_force_probe: no <7> [800.101071] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] status updated from unknown to connected <7> [800.111148] i915 device info: is_dgfx: no <7> [800.111196] i915 device info: has_64bit_reloc: yes <7> [800.111231] i915 device info: has_64k_pages: no <7> [800.111264] i915 device info: gpu_reset_clobbers_display: no <7> [800.111296] i915 device info: has_reset_engine: yes <7> [800.111325] i915 device info: has_3d_pipeline: yes <7> [800.112933] i915 device info: has_4tile: no <7> [800.112970] i915 device info: has_flat_ccs: no <7> [800.113002] i915 device info: has_global_mocs: no <7> [800.113032] i915 device info: has_gmd_id: no <7> [800.113062] i915 device info: has_gt_uc: yes <7> [800.113092] i915 device info: has_heci_pxp: no <7> [800.113121] i915 device info: has_heci_gscfi: no <7> [800.113151] i915 device info: has_guc_deprivilege: no <7> [800.113181] i915 device info: has_l3_ccs_read: no <7> [800.113210] i915 device info: has_l3_dpf: no <7> [800.113239] i915 device info: has_llc: yes <7> [800.113268] i915 device info: has_logical_ring_contexts: yes <7> [800.113298] i915 device info: has_logical_ring_elsq: no <7> [800.113328] i915 device info: has_media_ratio_mode: no <7> [800.115437] i915 device info: has_mslice_steering: no <7> [800.115476] i915 device info: has_oa_bpc_reporting: no <7> [800.115507] i915 device info: has_oa_slice_contrib_limits: no <7> [800.115539] i915 device info: has_oam: no <7> [800.115569] i915 device info: has_one_eu_per_fuse_bit: no <7> [800.115601] i915 device info: has_pxp: no <7> [800.115630] i915 device info: has_rc6: yes <7> [800.115662] i915 device info: has_rc6p: no <7> [800.115693] i915 device info: has_rps: yes <7> [800.115722] i915 device info: has_runtime_pm: yes <7> [800.115754] i915 device info: has_snoop: no <7> [800.115784] i915 device info: has_coherent_ggtt: yes <7> [800.115813] i915 device info: tuning_thread_rr_after_dep: no <7> [800.115845] i915 device info: unfenced_needs_alignment: no <7> [800.115876] i915 device info: hws_needs_physical: no <7> [800.115907] i915 device info: has_pooled_eu: no <7> [800.115938] i915 device info: cursor_needs_physical: no <7> [800.115969] i915 device info: has_cdclk_crawl: no <7> [800.116000] i915 device info: has_cdclk_squash: no <7> [800.116031] i915 device info: has_ddi: yes <7> [800.116062] i915 device info: has_dp_mst: yes <7> [800.116092] i915 device info: has_dsb: no <7> [800.116123] i915 device info: has_fpga_dbg: yes <7> [800.116153] i915 device info: has_gmch: no <7> [800.116182] i915 device info: has_hotplug: yes <7> [800.116213] i915 device info: has_hti: no <7> [800.116243] i915 device info: has_ipc: yes <7> [800.116274] i915 device info: has_overlay: no <7> [800.116305] i915 device info: has_psr: yes <7> [800.117729] i915 device info: has_psr_hw_tracking: yes <7> [800.117782] i915 device info: overlay_needs_physical: no <7> [800.117817] i915 device info: supports_tv: no <7> [800.117851] i915 device info: has_hdcp: yes <7> [800.117884] i915 device info: has_dmc: yes <7> [800.117915] i915 device info: has_dsc: no <7> [800.117947] i915 device info: rawclk rate: 24000 kHz <7> [800.117982] i915 device info: iommu: enabled <7> [800.118014] i915 device info: available engines: 40403 <7> [800.118050] i915 device info: slice total: 1, mask=0001 <7> [800.118086] i915 device info: subslice total: 3 <7> [800.118118] i915 device info: slice0: 3 subslices, mask=00000007 <7> [800.118156] i915 device info: slice1: 0 subslices, mask=00000000 <7> [800.118192] i915 device info: slice2: 0 subslices, mask=00000000 <7> [800.118226] i915 device info: EU total: 24 <7> [800.118258] i915 device info: EU per subslice: 8 <7> [800.118289] i915 device info: has slice power gating: no <7> [800.118320] i915 device info: has subslice power gating: no <7> [800.118920] i915 device info: has EU power gating: yes <6> [800.118960] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [800.118996] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [800.119030] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [800.133193] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [800.133538] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [800.133636] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [800.133847] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [800.140447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] status updated from unknown to disconnected <7> [800.140741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [800.140940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [800.141127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [800.199536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [800.222924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [800.223012] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [800.225285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [800.257883] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [800.257977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [800.271596] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [800.271924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [800.272128] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [800.272319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [800.274990] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to disconnected <7> [800.275286] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [800.275717] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [800.275904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [800.330530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [800.349704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [800.349790] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [800.352046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [800.367166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [800.367260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [800.369599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] status updated from unknown to disconnected <7> [800.369917] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [800.370114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [800.370307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [800.373042] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] status updated from unknown to disconnected <7> [800.373502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [800.373703] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [800.373898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [800.428579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [800.450756] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [800.450844] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [800.453137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [800.473988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [800.474082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [800.476691] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] status updated from unknown to disconnected <7> [800.477002] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [800.477190] [drm:drm_client_modeset_probe] connector 95 enabled? yes <7> [800.477249] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [800.477297] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [800.477452] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [800.477500] [drm:drm_client_modeset_probe] connector 125 enabled? no <7> [800.477547] [drm:drm_client_modeset_probe] connector 129 enabled? no <7> [800.477591] [drm:drm_client_modeset_probe] connector 135 enabled? no <7> [800.479090] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [800.479315] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95 <7> [800.479556] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0 <7> [800.479608] [drm:drm_client_modeset_probe] found mode 2400x1600 <7> [800.479653] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [800.479835] [drm:drm_client_modeset_probe] desired mode 2400x1600 set on crtc 51 (0,0) <7> [800.481028] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7> [800.481880] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7> [800.513927] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2400x1600 fb: 0x00100000 <6> [800.529540] fbcon: i915drmfb (fb0) is primary device <6> [800.535946] Console: switching to colour frame buffer device 300x100 <6> [800.536134] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [800.546665] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7> [800.546902] [drm:drm_client_modeset_probe] <7> [800.550250] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [800.552791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [800.571940] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [800.574085] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [800.580778] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [800.587937] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [800.592981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [800.593054] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [800.593103] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [800.601567] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [800.603956] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [800.615790] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [800.617628] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [800.623142] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [800.623493] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [800.623585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [800.623788] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <6> [800.642884] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7> [800.652738] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [800.652981] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [800.653187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [800.704840] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [800.716200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [800.744955] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [800.745046] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [800.747529] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [800.762781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [800.762870] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [800.765268] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [800.765919] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [800.766133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [800.768841] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [800.769059] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [800.769259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [800.823549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [800.840548] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [800.840637] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [800.843841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [800.863036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [800.863131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [800.865631] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [800.865854] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [800.866055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [800.868817] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [800.869040] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [800.869243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [800.924532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [800.943723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [800.943811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [800.947512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [800.968552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [800.968644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [800.972608] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [800.972835] [drm:drm_client_modeset_probe] connector 95 enabled? yes <7> [800.972896] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [800.972946] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [800.972992] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [800.973038] [drm:drm_client_modeset_probe] connector 125 enabled? no <7> [800.973085] [drm:drm_client_modeset_probe] connector 129 enabled? no <7> [800.973132] [drm:drm_client_modeset_probe] connector 135 enabled? no <7> [800.976749] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [800.976991] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95 <7> [800.977049] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0 <7> [800.977100] [drm:drm_client_modeset_probe] found mode 2400x1600 <7> [800.977147] [drm:drm_client_modeset_probe] picking CRTCs for 2400x1600 config <7> [800.981059] [drm:drm_client_modeset_probe] desired mode 2400x1600 set on crtc 51 (0,0) <6> [800.982889] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [800.984909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [800.989690] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [800.995116] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [800.996669] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [801.005829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [801.009776] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [801.011723] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [801.013577] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [801.015716] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [801.015793] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [801.015853] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [801.016081] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [801.017866] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [801.025456] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [801.042520] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [801.047221] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [801.047495] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [801.048861] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [801.049066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [801.053641] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [801.060108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [801.060484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [801.127578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [801.146881] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [801.149077] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [801.156519] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [801.158609] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [801.160830] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [801.163714] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [801.171498] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [801.172963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [801.173036] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [801.174938] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [801.176032] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [801.179260] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [801.203454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [801.203544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [801.205687] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [801.207266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [801.207604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [801.209884] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [801.211284] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [801.211597] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [801.267531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <6> [801.281987] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 <6> [801.299583] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 <7> [801.303702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [801.303784] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [801.305661] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [801.314409] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 <7> [801.329696] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [801.329777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [801.331734] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [801.335170] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [801.336551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [801.339626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [801.341556] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [801.341763] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [801.401688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [801.513610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [801.513693] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [801.521525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [801.540630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [801.540711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [801.544890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [801.651725] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [801.651956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [801.664848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [801.709217] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [801.709897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [801.763652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [801.790917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [801.791003] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [801.795080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [801.831568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [801.831651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [801.834599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [801.856609] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [801.856842] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [801.860111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [801.871246] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [801.871576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [801.924571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [801.941284] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [801.941462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [801.947634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [801.962154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [801.962238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [801.964749] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [801.975825] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [801.976033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [801.978903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [801.990145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [801.990468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [802.043711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [802.076012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [802.076133] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [802.088500] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [802.105594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [802.105676] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [802.111652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [802.121661] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [802.121889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [802.139084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [802.141215] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [802.148712] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [802.151880] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [802.156969] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [802.157051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [802.157112] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [802.158792] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [802.164499] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [802.171049] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [802.174796] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [802.182198] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [802.182470] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [802.182806] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [802.183007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [802.192169] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [802.194261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [802.194556] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [802.250571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [802.270682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [802.270764] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [802.277499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [802.299880] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [802.299962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [802.308546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [802.309056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [802.309247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [802.313541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [802.314004] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [802.314195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [802.373980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [802.405730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [802.405812] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [802.410740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [802.443082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [802.443167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [802.449887] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [802.463594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [802.463829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [802.467768] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [802.468247] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [802.469971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [802.525603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [802.552784] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [802.552865] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [802.580686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [802.616438] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [802.616519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [802.619789] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [802.624520] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:138] <7> [802.898735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [803.915907] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [803.919564] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [803.922092] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [805.199161] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [805.201721] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [805.203928] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [805.204036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [805.205405] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [805.207205] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [805.207548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [805.209248] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [805.210072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [805.213207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [805.219003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [805.228891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [805.346113] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [805.346966] [drm:drm_mode_setcrtc] [CONNECTOR:95:eDP-1] <7> [805.348182] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [805.350147] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 270000 max bpp 24 pixel clock 252750KHz <7> [805.351523] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 270000 bpp 24 <7> [805.353153] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 758250 available 1080000 <7> [805.358507] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:95:eDP-1] SDP split enable: no <7> [805.359936] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [805.361469] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:94:DDI A/PHY A] [CRTC:51:pipe A] <7> [805.363213] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [805.364740] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [805.366692] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [805.368635] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [805.370577] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5889501/8388608 link 490791/524288) <7> [805.372069] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [805.373943] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [805.375890] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2400) <7> [805.377321] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2560) <7> [805.379080] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2400) <7> [805.380545] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2560) <7> [805.382072] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2448) <7> [805.383542] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2480) <7> [805.385677] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600) <7> [805.387061] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1646) <7> [805.388873] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600) <7> [805.390309] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1646) <7> [805.392105] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1603) <7> [805.393590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1613) <7> [805.395322] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2400) <7> [805.396788] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2560) <7> [805.398686] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2400) <7> [805.400140] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2560) <7> [805.401961] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2448) <7> [805.403505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2480) <7> [805.405456] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600) <7> [805.407209] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1646) <7> [805.408825] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600) <7> [805.410733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1646) <7> [805.412213] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1603) <7> [805.414022] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1613) <7> [805.415601] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [805.417436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [805.418882] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [805.420671] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000003) <7> [805.422103] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [805.423874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 252750) <7> [805.425291] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 252750) <7> [805.427076] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 270000) <7> [805.428509] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [805.430751] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [805.432731] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [805.434282] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [805.435657] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [805.437488] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 <7> [805.439002] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 <7> [805.440778] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 <7> [805.442601] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (252750 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz) <7> [805.444470] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (15797 kHz) > old min cdclk (0 kHz) <7> [805.446003] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [805.447793] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [805.449221] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 <7> [805.451000] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 0 <7> [805.452549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset] <7> [805.454286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [805.455794] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [805.457568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [805.459022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [805.460834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [805.462284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [805.464057] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 5889501, data_n: 8388608, link_m: 490791, link_n: 524288, tu: 64 <7> [805.465641] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [805.467476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [805.468957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [805.470863] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7> [805.470894] i915 0000:00:02.0: pixelformat: RGB <7> [805.470918] i915 0000:00:02.0: colorimetry: sRGB <7> [805.470941] i915 0000:00:02.0: bpc: 0 <7> [805.470963] i915 0000:00:02.0: dynamic range: VESA range <7> [805.471025] i915 0000:00:02.0: content type: Not defined <7> [805.471049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [805.472548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [805.474265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [805.475793] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa <7> [805.477722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x40 0xa <7> [805.479169] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa <7> [805.480772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 270000, pipe src: 2400x1600+0+0, pixel rate 252750 <7> [805.482251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 82, ips linetime: 0 <7> [805.484043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [805.486191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [805.488849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [805.490635] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 <7> [805.492220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [805.494534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [805.496808] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [805.498802] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [805.500806] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [805.502785] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [805.504780] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [805.506782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:138] 2400x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [805.508819] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [805.510816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2400.000000x1600.000000+0.000000+0.000000 dst: 2400x1600+0+0 <7> [805.512860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [805.514845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [805.529714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [805.548626] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [805.566079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [805.570207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [805.573857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [805.577487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A] <7> [805.579464] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B] <7> [805.581676] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A] <7> [805.583587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B] <7> [805.585485] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C] <7> [805.587431] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C] <7> [805.589414] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [805.591318] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [805.593245] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [805.595736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D] <7> [805.597688] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [805.599943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [805.601868] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [805.603458] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [805.605897] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [805.607701] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [805.609295] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [805.611549] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:51:pipe A] <7> [805.613082] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [805.615474] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power on <7> [805.617483] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [805.809799] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [805.811270] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [805.812644] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power on <7> [805.814676] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [805.875670] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [805.876984] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [805.878235] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [805.879618] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [806.014512] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [806.016635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [806.018952] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [806.023682] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [806.025720] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [806.034473] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00 <7> [806.035669] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using LINK_BW_SET value 0a <7> [806.039163] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [806.041101] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [806.043001] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [806.048691] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Clock recovery OK <7> [806.050522] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [806.055691] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 1/1/1/1 <7> [806.057482] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 1/1/1/1 <7> [806.059444] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 01000000 <7> [806.064499] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 2/2/2/2 <7> [806.065815] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 2/2/2/2 <7> [806.067262] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 02000000 <7> [806.072780] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 0/0/0/0 <7> [806.074706] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [806.076157] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [806.081487] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [806.082807] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [806.085684] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [806.088984] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [806.090681] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [806.093214] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 100 <7> [806.099155] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 412 us, max time under evasion is 250 us <7> [806.107263] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [806.116147] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] <7> [806.117856] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [806.120589] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7> [806.123843] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [806.126907] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [806.126898] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [806.135666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [806.137562] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [806.139514] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [806.141446] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [806.144821] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [806.144912] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [806.144985] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [806.145506] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [806.148034] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [806.152255] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [806.154431] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [806.159567] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 1 <7> [806.159918] [drm:drm_mode_setcrtc] [CONNECTOR:95:eDP-1] <7> [806.176470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [806.179542] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1 <7> [806.179790] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [806.242531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [806.257615] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [806.257696] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [806.259610] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [806.274601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [806.274679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [806.276587] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [806.276825] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [806.278874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [806.279107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [806.332625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [806.344827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [806.344888] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [806.346257] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [806.358105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [806.358163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [806.359562] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1 <7> [806.359798] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [806.361418] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1 <7> [806.361610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [806.414627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [806.428271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [806.428487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [806.430174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [806.442722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [806.442785] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [806.444168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1 <7> [806.448108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [806.448264] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [806.451615] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [806.453527] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [806.455459] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [806.457275] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [806.459528] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [806.459606] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [806.459667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [806.459895] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [806.461708] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [806.465295] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [806.467175] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [806.471211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [806.471608] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [806.472628] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [806.472784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [806.474682] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [806.475692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [806.475884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [806.528587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [806.539758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [806.539823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [806.541469] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [806.552685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [806.552763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [806.554455] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [806.555640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [806.555777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [806.557848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [806.558857] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [806.558991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [806.611591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [806.624609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [806.624672] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [806.626792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [806.638948] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [806.639007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [806.640481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [806.641878] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [806.642029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [806.643678] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [806.645868] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [806.646014] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [806.698524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [806.712794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [806.712871] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [806.715741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [806.729196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [806.729258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [806.730626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [806.735052] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [806.736168] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [806.737803] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [806.739303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [806.741012] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [806.742522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5889501/8388608 link 490791/524288, found tu 0, data 0/0 link 0/0) <7> [806.744146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [806.745629] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [806.747158] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2400, found 0) <7> [806.748628] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2560, found 0) <7> [806.750145] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2400, found 0) <7> [806.751792] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2560, found 0) <7> [806.753718] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2448, found 0) <7> [806.755747] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2480, found 0) <7> [806.757978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0) <7> [806.759991] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1646, found 0) <7> [806.762285] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0) <7> [806.764040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1646, found 0) <7> [806.765574] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1603, found 0) <7> [806.767181] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1613, found 0) <7> [806.769775] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2400, found 0) <7> [806.771762] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2560, found 0) <7> [806.773836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2400, found 0) <7> [806.775819] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2560, found 0) <7> [806.777813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2448, found 0) <7> [806.779878] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2480, found 0) <7> [806.782110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0) <7> [806.784150] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1646, found 0) <7> [806.786463] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0) <7> [806.788045] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1646, found 0) <7> [806.790325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1603, found 0) <7> [806.792152] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1613, found 0) <7> [806.793795] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [806.796011] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [806.798255] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [806.800302] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [806.802441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 252750, found 0) <7> [806.804476] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 252750, found 0) <7> [806.806512] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 270000, found 0) <7> [806.808478] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [806.811144] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0 <7> [806.813903] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [806.816038] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [806.818027] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [806.819942] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [806.822026] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [806.823907] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [806.825793] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [806.827953] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [806.829994] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [806.832717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [806.834481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [806.836812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [806.838596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [806.841102] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [806.851320] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [807.057625] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0 <7> [807.059466] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [807.067721] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off <7> [807.069090] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time <7> [807.070761] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [807.119626] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [807.121113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [807.121593] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [807.123327] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [807.123567] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [807.125445] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [807.125863] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [807.127493] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [807.127906] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A] <7> [807.129897] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B] <7> [807.131759] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A] <7> [807.133594] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B] <7> [807.135484] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C] <7> [807.137315] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C] <7> [807.139118] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [807.140932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [807.142789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [807.162498] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D] <7> [807.165835] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [807.169163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [807.172442] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [807.179507] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] <7> [807.183140] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [807.186620] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [807.190583] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [807.196614] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [807.202978] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [807.213867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [807.215876] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [807.222544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [807.230298] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [807.236165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [807.242468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [807.245050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [807.254550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [807.257890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [807.266072] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [807.273743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [807.276150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [807.284097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [807.287537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [807.290831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [807.314801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [807.320948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [807.333737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [807.403928] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [807.404166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [807.430948] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [807.462174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [807.465510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [807.467642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [807.470642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [807.475464] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [807.477062] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [807.729810] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [807.731729] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [807.733748] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [807.735583] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [807.796751] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [807.798189] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [807.799518] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [807.800946] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [807.947097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [807.948963] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [807.950876] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [807.952703] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [807.954854] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [807.954934] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [807.954996] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [807.955226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [807.957048] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [807.961304] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [807.963601] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [807.967866] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [807.968068] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [807.968325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [807.972004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [807.973830] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [807.975671] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [807.977469] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [807.979754] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [807.979837] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [807.979905] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [807.980165] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [807.982626] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [807.986567] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [807.988471] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [807.992139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 1 <7> [807.992463] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [807.996950] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1 <7> [807.997199] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [808.053570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [808.068245] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [808.068517] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [808.070472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [808.085056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [808.085138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [808.086937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [808.087109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [808.089282] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [808.089670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [808.148743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [808.163688] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [808.163765] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [808.165673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [808.180306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [808.180490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [808.182500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1 <7> [808.182739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [808.184944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1 <7> [808.185172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [808.239536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [808.253619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [808.253698] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [808.255628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [808.270307] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [808.270543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [808.273023] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1 <7> [808.274942] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [808.275113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [808.277745] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [808.278870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [808.279072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [808.332592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [808.345796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [808.345855] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [808.348123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [808.359031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [808.359088] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [808.360461] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [808.361661] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [808.361794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [808.363921] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [808.365617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [808.365828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [808.419516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [808.432746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [808.432819] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [808.434643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [808.446074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [808.446137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [808.447554] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [808.448785] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [808.448926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [808.450595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [808.451597] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [808.451788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [808.503576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [808.516818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [808.516890] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [808.518738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [808.531829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [808.531905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [808.533835] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [811.017695] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [811.019703] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [811.021587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [811.021929] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [811.023680] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [811.024089] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [811.025317] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [811.026181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [811.027579] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [811.029277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [811.031580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [811.040984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [811.145224] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [811.146120] [drm:drm_mode_setcrtc] [CONNECTOR:95:eDP-1] <7> [811.147309] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [811.149701] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 270000 max bpp 24 pixel clock 252750KHz <7> [811.151544] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 270000 bpp 24 <7> [811.153328] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 758250 available 1080000 <7> [811.155240] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:95:eDP-1] SDP split enable: no <7> [811.157053] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [811.159087] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:94:DDI A/PHY A] [CRTC:51:pipe A] <7> [811.160906] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [811.162881] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [811.164812] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [811.166768] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [811.168707] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5889501/8388608 link 490791/524288) <7> [811.170676] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [811.172488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [811.173901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2400) <7> [811.175790] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2560) <7> [811.177757] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2400) <7> [811.179743] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2560) <7> [811.181716] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2448) <7> [811.183653] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2480) <7> [811.185624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600) <7> [811.187564] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1646) <7> [811.189528] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600) <7> [811.191503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1646) <7> [811.193591] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1603) <7> [811.195489] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1613) <7> [811.197422] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2400) <7> [811.199257] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2560) <7> [811.200834] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2400) <7> [811.202563] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2560) <7> [811.204044] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2448) <7> [811.205777] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2480) <7> [811.207281] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600) <7> [811.209151] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1646) <7> [811.211031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600) <7> [811.212894] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1646) <7> [811.214762] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1603) <7> [811.216624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1613) <7> [811.218305] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [811.219999] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [811.221436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [811.223125] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [811.224750] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 252750) <7> [811.226473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 252750) <7> [811.227895] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 270000) <7> [811.229736] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [811.231707] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [811.233454] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [811.234727] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [811.236575] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [811.238288] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 <7> [811.240173] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 <7> [811.242061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 <7> [811.244171] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (252750 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz) <7> [811.246174] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (15797 kHz) > old min cdclk (0 kHz) <7> [811.248190] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [811.250221] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [811.252273] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0 <7> [811.254263] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 0 <7> [811.256302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset] <7> [811.258321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [811.260323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [811.262297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [811.264023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [811.265648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [811.267441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [811.268984] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 5889501, data_n: 8388608, link_m: 490791, link_n: 524288, tu: 64 <7> [811.270484] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [811.272051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [811.273738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [811.275278] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7> [811.275323] i915 0000:00:02.0: pixelformat: RGB <7> [811.275455] i915 0000:00:02.0: colorimetry: sRGB <7> [811.275490] i915 0000:00:02.0: bpc: 0 <7> [811.275526] i915 0000:00:02.0: dynamic range: VESA range <7> [811.275563] i915 0000:00:02.0: content type: Not defined <7> [811.275601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [811.277472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [811.279216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [811.280977] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa <7> [811.282495] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x40 0xa <7> [811.284438] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa <7> [811.285979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 270000, pipe src: 2400x1600+0+0, pixel rate 252750 <7> [811.287763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 82, ips linetime: 0 <7> [811.289172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [811.291022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [811.292937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [811.294539] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 <7> [811.296166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [811.298109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [811.299736] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [811.301954] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [811.303984] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [811.306220] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [811.308218] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [811.310220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:138] 2400x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [811.312465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [811.314472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2400.000000x1600.000000+0.000000+0.000000 dst: 2400x1600+0+0 <7> [811.316669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [811.318765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [811.332863] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [811.347759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [811.349836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [811.351711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [811.353590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [811.356121] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A] <7> [811.357508] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B] <7> [811.358881] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A] <7> [811.360326] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B] <7> [811.361688] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C] <7> [811.363155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C] <7> [811.364538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [811.366259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [811.367700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [811.369479] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D] <7> [811.371160] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [811.372590] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [811.374020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [811.375488] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [811.377137] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [811.378692] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [811.380165] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [811.381890] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:51:pipe A] <7> [811.383281] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [811.384964] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power on <7> [811.386240] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [811.625785] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [811.627190] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [811.628620] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power on <7> [811.630738] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [811.691748] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [811.693162] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [811.694498] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [811.695874] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [811.829575] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [811.831068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [811.832875] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [811.835228] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [811.837151] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [811.842648] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00 <7> [811.843741] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using LINK_BW_SET value 0a <7> [811.847572] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [811.849099] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [811.850509] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [811.854937] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Clock recovery OK <7> [811.856237] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [811.861051] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 1/1/1/1 <7> [811.862509] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 1/1/1/1 <7> [811.863926] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 01000000 <7> [811.868733] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 2/2/2/2 <7> [811.870044] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 2/2/2/2 <7> [811.871521] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 02000000 <7> [811.877132] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 0/0/0/0 <7> [811.878501] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [811.879883] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [811.884999] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [811.886240] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [811.888665] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [811.890737] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [811.892227] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [811.893858] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 100 <7> [811.907732] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [811.912015] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] <7> [811.913610] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [811.916219] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [811.918934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [811.922276] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [811.923780] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [811.925775] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [811.927561] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [811.929573] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [811.929662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [811.929730] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [811.929993] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [811.931831] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [811.936620] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [811.938470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [811.942209] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 1 <7> [811.942535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [811.944714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1 <7> [811.944948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [811.997609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [812.011178] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [812.011263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [812.013215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [812.026925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [812.026991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [812.028504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [812.028749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [812.031007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [812.031229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [812.084580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [812.098180] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [812.098243] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [812.100085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [812.112033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [812.112118] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [812.114059] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1 <7> [812.114295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [812.116466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1 <7> [812.116691] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [812.170579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [812.183855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [812.183917] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [812.185229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [812.196812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [812.196871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [812.198170] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1 <7> [812.198602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [812.198804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [812.201978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [812.203301] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [812.204634] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [812.207033] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [812.208740] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [812.208818] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [812.208878] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [812.209080] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [812.210479] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [812.216230] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [812.217726] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [812.221093] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [812.221233] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [812.222524] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [812.222721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [812.224161] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [812.226182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [812.226498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [812.280524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [812.295861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [812.295922] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [812.297711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [812.311454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [812.311535] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [812.313057] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [812.314279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [812.314544] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [812.316853] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [812.318309] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [812.318524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [812.370577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [812.381844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [812.381902] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [812.383204] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [812.393915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [812.393970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [812.395257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [812.396588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [812.396724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [812.398173] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [812.399136] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [812.399259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [812.452624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [812.463153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [812.463211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [812.464490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [812.475295] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [812.475445] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [812.477212] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [812.481008] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:138] from all active usage due to RMFB ioctl <7> [812.481744] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:138] is removed <7> [812.482495] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [812.484437] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [812.486319] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [812.488509] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [812.490221] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [812.493053] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [812.532069] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [812.533552] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [812.535079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 <7> [812.536953] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 <7> [812.538903] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 <7> [812.553005] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 523 us, max time under evasion is 250 us <7> [812.567734] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [812.577048] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7> [812.577205] [drm:drm_client_modeset_probe] <7> [812.580029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] <7> [812.581446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1] <7> [812.588965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [812.590247] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [812.591804] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [812.593577] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [812.596643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [812.596729] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor <7> [812.596795] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0 <7> [812.597166] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no <7> [812.599050] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [812.603505] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [812.605424] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [812.610619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes : <7> [812.610869] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa <7> [812.610959] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] <7> [812.611162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1] <7> [812.614209] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected <7> [812.614508] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [812.614711] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [812.668530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [812.683112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [812.683196] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [812.685056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [812.699464] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [812.699542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [812.701517] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [812.701733] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [812.701930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [812.703957] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [812.704162] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] <7> [812.704465] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2] <7> [812.758626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [812.772010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [812.772091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [812.774744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [812.791240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [812.792178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [812.794165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected <7> [812.794606] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] <7> [812.794814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3] <7> [812.796893] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected <7> [812.797102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] <7> [812.797298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3] <7> [812.851526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [812.866185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [812.866268] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [812.868111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [812.882539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [812.882619] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [812.884574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected <7> [812.884783] [drm:drm_client_modeset_probe] connector 95 enabled? yes <7> [812.884838] [drm:drm_client_modeset_probe] connector 103 enabled? no <7> [812.884887] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [812.884932] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [812.884975] [drm:drm_client_modeset_probe] connector 125 enabled? no <7> [812.885018] [drm:drm_client_modeset_probe] connector 129 enabled? no <7> [812.885063] [drm:drm_client_modeset_probe] connector 135 enabled? no <7> [812.886673] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [812.886900] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95 <7> [812.886951] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0 <7> [812.886998] [drm:drm_client_modeset_probe] found mode 2400x1600 <7> [812.887042] [drm:drm_client_modeset_probe] picking CRTCs for 2400x1600 config <7> [812.887482] [drm:drm_client_modeset_probe] desired mode 2400x1600 set on crtc 51 (0,0) <6> [812.931536] Console: switching to colour dummy device 80x25 <7> [813.390225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [813.396104] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [813.412510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [813.443176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [813.445621] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [813.461580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [813.792559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [813.831299] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [813.851776] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [813.853900] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [813.857182] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [813.860915] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [813.862961] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [813.866256] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [813.868788] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [813.872967] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [813.887221] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [813.894672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [814.090282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [814.091911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [814.093475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [814.095784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [814.111028] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [814.113286] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [814.115316] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [814.117563] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [814.119583] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5889501/8388608 link 490791/524288, found tu 0, data 0/0 link 0/0) <7> [814.121767] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [814.125198] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [814.127462] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2400, found 0) <7> [814.129664] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2560, found 0) <7> [814.131677] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2400, found 0) <7> [814.133841] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2560, found 0) <7> [814.135829] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2448, found 0) <7> [814.137975] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2480, found 0) <7> [814.140005] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0) <7> [814.142166] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1646, found 0) <7> [814.144191] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0) <7> [814.146620] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1646, found 0) <7> [814.148635] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1603, found 0) <7> [814.150735] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1613, found 0) <7> [814.153813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2400, found 0) <7> [814.155845] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2560, found 0) <7> [814.157858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2400, found 0) <7> [814.159852] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2560, found 0) <7> [814.161771] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2448, found 0) <7> [814.163996] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2480, found 0) <7> [814.165940] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0) <7> [814.167899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1646, found 0) <7> [814.169769] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0) <7> [814.171692] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1646, found 0) <7> [814.173837] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1603, found 0) <7> [814.175986] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1613, found 0) <7> [814.177783] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [814.179672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [814.181456] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [814.183543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [814.185256] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 252750, found 0) <7> [814.186772] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 252750, found 0) <7> [814.188258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 270000, found 0) <7> [814.189655] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [814.191509] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0 <7> [814.193774] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [814.195671] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [814.197491] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [814.198963] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [814.200707] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [814.202154] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [814.203714] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [814.205766] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [814.207735] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [814.209607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [814.211607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [814.213625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [814.215716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [814.219144] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [814.228562] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [814.433686] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0 <7> [814.437278] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [814.454170] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off <7> [814.456158] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time <7> [814.458215] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [814.506518] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [814.508626] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010 <7> [814.509250] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [814.509974] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long <7> [814.511316] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [814.511619] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [814.513071] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A] <7> [814.513608] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A] <7> [814.515600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B] <7> [814.517149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A] <7> [814.519067] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B] <7> [814.520968] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C] <7> [814.522909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C] <7> [814.524863] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [814.526785] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [814.528696] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [814.530595] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D] <7> [814.532504] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [814.534721] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [814.536612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [814.538548] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1] <7> [814.540645] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [814.542727] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [814.544800] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [814.546888] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [814.549489] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [814.598202] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [815.084024] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [815.097545] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [815.113927] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [815.115960] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [816.758997] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [816.768627] [IGT] i915_pm_rpm: exiting, ret=0

<6> [779.955092] Console: switching to colour dummy device 80x25

<6> [779.962609] [IGT] i915_pm_rpm: executing

<7> [780.046722] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [780.052879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [780.053114] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [780.055417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [780.058789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [780.062566] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [780.064664] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f

<7> [780.071608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [780.072976] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [780.074283] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [780.075743] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [780.077566] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [780.077643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [780.077705] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [780.077934] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [780.079747] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [780.083687] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [780.085498] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [780.091513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [780.091715] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [780.094830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [780.095051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [780.099247] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [780.101823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [780.102036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [780.156743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [780.172108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [780.172186] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [780.175852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [780.190573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [780.190656] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [780.192871] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [780.194301] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [780.194582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [780.196724] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [780.198191] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [780.198461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [780.252531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [780.266907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [780.266983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [780.268850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [780.282277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [780.282436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [780.284322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [780.285842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [780.286047] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [780.288108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [780.289974] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [780.290180] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [780.342515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [780.357008] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [780.357100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [780.359269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [780.373923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [780.373985] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [780.376249] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [780.436774] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [780.436942] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [780.438623] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [780.449585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [780.449802] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [780.503614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [780.514587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [780.514643] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [780.515925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [780.529966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [780.530027] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [780.531558] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [780.541691] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [780.541916] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [780.544157] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [780.551937] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [780.552093] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [780.605637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [780.617940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [780.618020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [780.619897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [780.635191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [780.635254] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [780.636738] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [780.645522] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [780.645741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [780.647267] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [780.655095] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [780.655248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [780.708560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [780.723175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [780.723236] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [780.724550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [780.738252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [780.738312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [780.739829] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [780.748095] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [780.748316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [780.751658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [780.752967] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [780.755168] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [780.757518] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [780.759649] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [780.759728] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [780.759788] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [780.760039] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [780.761996] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [780.765147] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [780.766693] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [780.770123] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [780.770262] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [780.770670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [780.770869] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [780.772695] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [780.773145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [780.773494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [780.827163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [780.837940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [780.837998] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [780.839248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [780.853270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [780.853419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [780.855604] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [780.856107] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [780.856291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [780.858302] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [780.858825] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [780.859015] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [780.912587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [780.923278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [780.923417] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [780.924746] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [780.938239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [780.938297] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [780.940044] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [780.940576] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [780.940767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [780.942269] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [780.942704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [780.942828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [780.995589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [781.006136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [781.006193] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [781.007490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [781.020819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [781.020877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [781.022288] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [781.026139] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:140]

<7> [782.477703] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [782.478485] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [782.480479] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [782.481987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [782.483985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [782.485500] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5889501/8388608 link 490791/524288, found tu 0, data 0/0 link 0/0)

<7> [782.487427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [782.488886] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [782.490728] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2400, found 0)

<7> [782.492162] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2560, found 0)

<7> [782.494067] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2400, found 0)

<7> [782.495607] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2560, found 0)

<7> [782.497522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2448, found 0)

<7> [782.498989] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2480, found 0)

<7> [782.500586] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0)

<7> [782.502002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1646, found 0)

<7> [782.503877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0)

<7> [782.505427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1646, found 0)

<7> [782.507403] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1603, found 0)

<7> [782.509160] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1613, found 0)

<7> [782.510644] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2400, found 0)

<7> [782.512464] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2560, found 0)

<7> [782.513857] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2400, found 0)

<7> [782.515646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2560, found 0)

<7> [782.517101] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2448, found 0)

<7> [782.518943] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2480, found 0)

<7> [782.520508] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0)

<7> [782.522403] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1646, found 0)

<7> [782.523817] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0)

<7> [782.525519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1646, found 0)

<7> [782.527225] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1603, found 0)

<7> [782.529222] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1613, found 0)

<7> [782.530748] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [782.532193] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [782.533733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [782.535189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [782.536622] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 252750, found 0)

<7> [782.538077] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 252750, found 0)

<7> [782.539514] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 270000, found 0)

<7> [782.540981] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [782.542489] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0

<7> [782.544194] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [782.546032] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [782.547470] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [782.548902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [782.550236] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [782.551738] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [782.553104] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [782.554793] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [782.556270] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [782.557756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [782.559209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [782.560700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [782.562138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [782.564872] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [782.580640] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [782.786671] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0

<7> [782.789228] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [782.811140] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off

<7> [782.812667] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [782.814051] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [782.863627] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [782.865255] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [782.866676] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [782.868363] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [782.870914] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [782.872916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [782.876993] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [782.880008] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [782.882050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A]

<7> [782.886020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B]

<7> [782.887970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A]

<7> [782.890063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B]

<7> [782.892008] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C]

<7> [782.893925] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C]

<7> [782.895831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [782.897705] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [782.899601] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [782.901473] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D]

<7> [782.903090] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [782.904913] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [782.906851] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [782.908779] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1]

<7> [782.910914] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [782.912985] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [782.915057] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [782.917114] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [782.919572] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [782.923917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [782.926008] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [782.928085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [782.932284] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [782.934190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [782.936645] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [782.939314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [782.941499] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [782.943518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [782.946850] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [782.948698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [782.950977] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [782.953677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [782.955728] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [782.957252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [783.025708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [783.031409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [783.042792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [783.084114] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [783.086128] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 270000 max bpp 24 pixel clock 252750KHz

<7> [783.087601] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 270000 bpp 24

<7> [783.089551] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 758250 available 1080000

<7> [783.091521] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:95:eDP-1] SDP split enable: no

<7> [783.093436] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [783.095535] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:94:DDI A/PHY A] [CRTC:51:pipe A]

<7> [783.097944] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [783.100062] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [783.102102] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [783.104226] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [783.106901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5889501/8388608 link 490791/524288)

<7> [783.109706] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [783.111972] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [783.114310] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2400)

<7> [783.116606] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2560)

<7> [783.118909] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2400)

<7> [783.120935] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2560)

<7> [783.122886] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2448)

<7> [783.124947] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2480)

<7> [783.126980] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600)

<7> [783.129738] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1646)

<7> [783.131650] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600)

<7> [783.133935] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1646)

<7> [783.136025] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1603)

<7> [783.138109] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1613)

<7> [783.140146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2400)

<7> [783.142202] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2560)

<7> [783.144216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2400)

<7> [783.146593] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2560)

<7> [783.148532] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2448)

<7> [783.150239] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2480)

<7> [783.152265] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600)

<7> [783.154297] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1646)

<7> [783.156249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600)

<7> [783.158297] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1646)

<7> [783.160287] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1603)

<7> [783.162284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1613)

<7> [783.164313] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [783.166446] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [783.168494] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [783.170498] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [783.172519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 252750)

<7> [783.174512] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 252750)

<7> [783.176547] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 270000)

<7> [783.178560] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [783.180984] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [783.183146] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [783.185093] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [783.186995] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [783.188935] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0

<7> [783.190905] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0

<7> [783.192867] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0

<7> [783.195033] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (252750 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz)

<7> [783.197106] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (15797 kHz) > old min cdclk (0 kHz)

<7> [783.199157] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [783.201193] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [783.203202] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0

<7> [783.205200] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 0

<7> [783.207186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset]

<7> [783.209201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [783.211182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [783.213215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [783.215255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [783.217307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [783.219307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [783.221428] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 5889501, data_n: 8388608, link_m: 490791, link_n: 524288, tu: 64

<7> [783.223499] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [783.225512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [783.227485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [783.229506] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0

<7> [783.229562] i915 0000:00:02.0: pixelformat: RGB

<7> [783.229609] i915 0000:00:02.0: colorimetry: sRGB

<7> [783.229654] i915 0000:00:02.0: bpc: 0

<7> [783.229698] i915 0000:00:02.0: dynamic range: VESA range

<7> [783.229744] i915 0000:00:02.0: content type: Not defined

<7> [783.229791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [783.231837] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [783.233834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [783.235805] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa

<7> [783.237878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x40 0xa

<7> [783.239902] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa

<7> [783.241954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 270000, pipe src: 2400x1600+0+0, pixel rate 252750

<7> [783.243947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 82, ips linetime: 0

<7> [783.245983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [783.247964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [783.249988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [783.251993] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0

<7> [783.254033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [783.256042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [783.258045] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [783.260050] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [783.262586] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [783.264548] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [783.266542] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [783.268600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:96] 2400x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [783.270693] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [783.272997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2400.000000x1600.000000+0.000000+0.000000 dst: 2400x1600+0+0

<7> [783.275008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [783.277079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [783.292032] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [783.314196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [783.318893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [783.320938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [783.323597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [783.327641] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A]

<7> [783.329555] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B]

<7> [783.331042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A]

<7> [783.332983] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B]

<7> [783.334945] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C]

<7> [783.336905] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C]

<7> [783.338831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [783.340779] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [783.342691] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [783.344621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D]

<7> [783.346531] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [783.348543] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [783.350469] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [783.352484] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [783.354642] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [783.356796] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [783.358962] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [783.361516] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:51:pipe A]

<7> [783.363562] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [783.366486] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power on

<7> [783.368986] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [783.481842] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [783.483793] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [783.485739] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power on

<7> [783.487771] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [783.548783] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [783.550239] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [783.551551] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [783.553180] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [783.686585] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [783.688097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [783.690171] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [783.695080] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [783.697135] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [783.706849] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00

<7> [783.708259] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using LINK_BW_SET value 0a

<7> [783.711811] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [783.713716] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [783.715709] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [783.723325] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Clock recovery OK

<7> [783.724810] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [783.729608] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 1/1/1/1

<7> [783.731501] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 1/1/1/1

<7> [783.733491] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 01000000

<7> [783.738967] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 2/2/2/2

<7> [783.740799] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 2/2/2/2

<7> [783.742745] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 02000000

<7> [783.748310] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 0/0/0/0

<7> [783.749664] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [783.751150] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [783.756945] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [783.758316] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [783.761433] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [783.764917] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [783.766416] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [783.768866] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 100

<7> [783.780639] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [783.790401] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1]

<7> [783.791909] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [783.795059] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [783.800074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<6> [783.808866] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [783.809090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [783.811278] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [783.814675] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [783.816963] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [783.820299] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [783.820497] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [783.820570] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [783.820966] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [783.824243] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [783.829805] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [783.831692] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [783.836810] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 1

<7> [783.837125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [783.841019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1

<7> [783.841268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [783.895508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [783.914595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [783.914681] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [783.916981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [783.932904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [783.932991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [783.936039] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [783.936289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [783.939750] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [783.939993] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [783.994515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [784.010423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [784.010505] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [784.012480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [784.028497] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [784.028582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [784.031617] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1

<7> [784.031866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [784.035272] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1

<7> [784.036880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [784.091552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [784.110273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [784.110445] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [784.113561] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [784.129208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [784.129296] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [784.132924] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1

<7> [784.377183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [784.381309] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [784.398119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [784.429029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [784.431169] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [784.446615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [784.593055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [784.608455] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [784.633054] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [784.635203] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [784.642535] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [784.645880] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [784.649191] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [784.656276] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [784.662587] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [784.668291] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [784.675655] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [784.683503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [785.048106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [785.050549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [785.052764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [785.055237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [785.070040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [785.072086] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [785.075555] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [785.078754] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [785.081978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5889501/8388608 link 490791/524288, found tu 0, data 0/0 link 0/0)

<7> [785.085169] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [785.088602] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [785.092087] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2400, found 0)

<7> [785.095612] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2560, found 0)

<7> [785.099100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2400, found 0)

<7> [785.102450] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2560, found 0)

<7> [785.104495] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2448, found 0)

<7> [785.106492] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2480, found 0)

<7> [785.108501] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0)

<7> [785.110475] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1646, found 0)

<7> [785.112459] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0)

<7> [785.114429] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1646, found 0)

<7> [785.117250] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1603, found 0)

<7> [785.119473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1613, found 0)

<7> [785.121731] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2400, found 0)

<7> [785.123493] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2560, found 0)

<7> [785.131686] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2400, found 0)

<7> [785.135325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2560, found 0)

<7> [785.136796] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2448, found 0)

<7> [785.139027] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2480, found 0)

<7> [785.140485] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0)

<7> [785.142177] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1646, found 0)

<7> [785.143542] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0)

<7> [785.145447] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1646, found 0)

<7> [785.146802] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1603, found 0)

<7> [785.148948] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1613, found 0)

<7> [785.150322] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [785.152618] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [785.153987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [785.155673] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [785.157028] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 252750, found 0)

<7> [785.159468] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 252750, found 0)

<7> [785.161473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 270000, found 0)

<7> [785.164041] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [785.165865] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0

<7> [785.167765] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [785.170578] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [785.172036] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [785.173553] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [785.175283] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [785.176681] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [785.178465] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [785.180157] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [785.182084] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [785.183617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [785.185586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [785.187083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [785.188939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [785.191815] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [785.200313] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [785.409695] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0

<7> [785.413781] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [785.438940] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off

<7> [785.440625] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [785.442572] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [785.491603] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [785.493079] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [785.493916] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [785.494894] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [785.496490] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [785.496724] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [785.498645] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A]

<7> [785.498889] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [785.500695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B]

<7> [785.502280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A]

<7> [785.503719] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B]

<7> [785.505022] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C]

<7> [785.506466] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C]

<7> [785.507772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [785.509260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [785.510712] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [785.512497] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D]

<7> [785.514637] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [785.516036] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [785.518268] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [785.520212] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1]

<7> [785.522491] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [785.524915] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [785.526496] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [785.528445] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [785.530729] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [785.573630] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [786.058847] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [786.060937] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [786.094778] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [786.096690] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [787.799712] [IGT] Reloading i915 w/o display

<7> [789.884866] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [789.886905] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [789.889175] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [789.891531] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [789.894847] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [789.896811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [789.903605] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [789.905478] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [789.907317] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [789.909133] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [789.909195] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [789.914745] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [789.914934] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [789.916471] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [789.921281] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7aaa68c0

<7> [789.923744] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [789.925919] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [789.928033] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [789.929936] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [789.932050] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [789.934563] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: LPDDR3

<7> [789.936428] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no

<7> [789.938418] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [789.939955] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [789.941077] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no

<7> [789.942723] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [789.944415] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [789.946016] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [789.947611] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [789.949189] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [789.955117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [789.957498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212

<7> [789.959897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [789.962252] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [789.964629] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [789.967000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [789.969464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [789.971808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [789.974172] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [789.976538] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [789.978922] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [789.981263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 22, min size 78)

<7> [789.983582] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [789.985864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [789.988181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [789.990561] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [789.992941] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [789.995294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [789.997643] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [789.999755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [790.002047] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [790.004414] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0

<7> [790.006655] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [790.008912] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0

<7> [790.011312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [790.013670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [790.015954] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [790.018272] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [790.020716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [790.023673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [790.026197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [790.028595] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [790.030906] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [790.033202] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [790.035503] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [790.038545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [790.040702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [790.043963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [790.046922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [790.050284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [790.052993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [790.060016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [790.062959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [790.066556] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [790.078876] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [790.082044] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [790.088082] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [790.091105] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [790.093311] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [790.095516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [790.097534] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [790.099267] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [790.101273] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [790.102984] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [790.104938] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [790.106593] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [790.136979] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [790.173491] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [790.177106] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [790.180867] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [790.183225] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [790.186815] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [790.188848] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [790.191029] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [790.193012] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [790.195286] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [790.197274] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [790.199468] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [790.201196] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 25000 Hz, active high, min brightness 0, level 255, controller 0

<7> [790.203427] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [790.205734] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [790.207929] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [790.209452] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [790.211526] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [790.213080] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [790.214973] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [790.217146] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [790.221406] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [790.223080] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [790.224944] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [790.226824] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [790.228579] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [790.230496] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [790.437519] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00

<7> [790.439223] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-60-ad dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [790.441054] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 bb ff

<7> [790.444515] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [790.468166] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [790.468233] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [790.468277] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [790.468947] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using preferred EDID fixed mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [790.470953] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:95:eDP-1] Performing OUI wait (30 ms)

<7> [790.483500] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:95:eDP-1] DRRS type: none

<7> [790.485849] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:95:eDP-1] Using native PCH PWM for backlight control

<7> [790.487902] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:95:eDP-1] backlight initialized, disabled, brightness 0/100

<7> [790.490263] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [790.492081] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [790.493635] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [790.495896] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [790.497474] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [790.499661] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [790.503702] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:102:DDI B/PHY B] using AUX B (VBT)

<7> [790.505538] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B]

<7> [790.510895] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [790.512597] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B]

<7> [790.514067] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:102:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [790.518248] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI C/PHY C] using AUX C (platform default)

<7> [790.520811] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI C/PHY C]

<7> [790.527831] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [790.530088] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI C/PHY C]

<7> [790.532214] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [790.535846] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI D/PHY D] using AUX D (VBT)

<7> [790.538281] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI D/PHY D]

<7> [790.543454] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [790.545178] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI D/PHY D]

<7> [790.546743] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [790.549983] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present

<7> [790.555175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [790.558514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [790.561648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [790.564043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [790.566215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [790.568145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [790.570197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [790.572326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [790.574689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [790.577042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [790.579463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [790.581815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [790.584184] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [790.586608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [790.588840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A

<7> [790.590681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B

<7> [790.592788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C

<7> [790.595040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [790.597079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A

<7> [790.598747] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B

<7> [790.600854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C

<7> [790.602585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [790.604492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A

<7> [790.606088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B

<7> [790.608099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C

<7> [790.609948] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [790.611912] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [790.613889] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [790.616192] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [790.619097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled

<7> [790.621998] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled

<7> [790.624516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [790.626927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled

<7> [790.629478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:125:HDMI-A-2] hw state readout: disabled

<7> [790.631921] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-3] hw state readout: disabled

<7> [790.634829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-3] hw state readout: disabled

<7> [790.636505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [790.639028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [790.641015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [790.642774] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [790.645118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [790.647439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [790.649634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [790.651813] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [790.654167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [790.656182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [790.660456] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [790.662658] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [790.666540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [790.668842] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [790.671136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [790.673525] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [790.675702] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [790.677699] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [790.679287] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [790.681760] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [790.683411] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [790.684863] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [790.686977] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [790.699749] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [790.701465] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [790.703598] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [790.721240] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0

<7> [790.729986] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0

<7> [790.737816] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0

<7> [790.878772] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [790.881804] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [790.883808] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [790.885430] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [790.887321] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [790.889234] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [790.895128] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [790.896482] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [790.897748] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [790.899494] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [790.982871] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:95:eDP-1] backlight device intel_backlight registered

<7> [790.987208] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [791.000091] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:eDP-1] generating connector hotplug event

<7> [791.007267] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [791.017225] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:103:DP-1] generating connector hotplug event

<7> [791.022892] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<7> [791.028171] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [791.046745] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event

<7> [791.052782] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:125:HDMI-A-2] generating connector hotplug event

<7> [791.060523] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-3

<7> [791.074065] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-3] generating connector hotplug event

<7> [791.088997] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-3] generating connector hotplug event

<6> [791.090109] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [791.130213] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected

<6> [791.140732] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [791.149966] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14

<7> [791.157539] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [791.166760] [drm:drm_client_modeset_probe]

<7> [791.166318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [791.168838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [791.170625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [791.171142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [791.171149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [791.173505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [791.175169] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] status updated from unknown to disconnected

<7> [791.175799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [791.182871] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [791.185143] i915 device info: pciid=0x591e rev=0x02 platform=KABYLAKE (subplatform=0x2) gen=9

<7> [791.185197] i915 device info: graphics version: 9

<7> [791.185233] i915 device info: media version: 9

<7> [791.185265] i915 device info: display version: 9

<7> [791.185297] i915 device info: graphics stepping: C0

<7> [791.185411] i915 device info: media stepping: C0

<7> [791.185444] i915 device info: display stepping: B0

<7> [791.185475] i915 device info: base die stepping: **

<7> [791.185533] i915 device info: memory-regions: 0x21

<7> [791.185560] i915 device info: page-sizes: 0x11000

<7> [791.185592] i915 device info: platform: KABYLAKE

<7> [791.185622] i915 device info: ppgtt-size: 48

<7> [791.185654] i915 device info: ppgtt-type: 2

<7> [791.185684] i915 device info: dma_mask_size: 39

<7> [791.185716] i915 device info: is_mobile: no

<7> [791.185748] i915 device info: is_lp: no

<7> [791.185779] i915 device info: require_force_probe: no

<7> [791.185810] i915 device info: is_dgfx: no

<7> [791.185840] i915 device info: has_64bit_reloc: yes

<7> [791.185871] i915 device info: has_64k_pages: no

<7> [791.185903] i915 device info: gpu_reset_clobbers_display: no

<7> [791.185935] i915 device info: has_reset_engine: yes

<7> [791.185967] i915 device info: has_3d_pipeline: yes

<7> [791.185998] i915 device info: has_4tile: no

<7> [791.186029] i915 device info: has_flat_ccs: no

<7> [791.186059] i915 device info: has_global_mocs: no

<7> [791.186091] i915 device info: has_gmd_id: no

<7> [791.186121] i915 device info: has_gt_uc: yes

<7> [791.186152] i915 device info: has_heci_pxp: no

<7> [791.186184] i915 device info: has_heci_gscfi: no

<7> [791.186216] i915 device info: has_guc_deprivilege: no

<7> [791.186248] i915 device info: has_l3_ccs_read: no

<7> [791.186279] i915 device info: has_l3_dpf: no

<7> [791.186310] i915 device info: has_llc: yes

<7> [791.186414] i915 device info: has_logical_ring_contexts: yes

<7> [791.186448] i915 device info: has_logical_ring_elsq: no

<7> [791.186479] i915 device info: has_media_ratio_mode: no

<7> [791.186511] i915 device info: has_mslice_steering: no

<7> [791.186543] i915 device info: has_oa_bpc_reporting: no

<7> [791.186573] i915 device info: has_oa_slice_contrib_limits: no

<7> [791.186604] i915 device info: has_oam: no

<7> [791.186637] i915 device info: has_one_eu_per_fuse_bit: no

<7> [791.186669] i915 device info: has_pxp: no

<7> [791.186699] i915 device info: has_rc6: yes

<7> [791.186729] i915 device info: has_rc6p: no

<7> [791.186760] i915 device info: has_rps: yes

<7> [791.186792] i915 device info: has_runtime_pm: yes

<7> [791.186824] i915 device info: has_snoop: no

<7> [791.186855] i915 device info: has_coherent_ggtt: yes

<7> [791.186887] i915 device info: tuning_thread_rr_after_dep: no

<7> [791.186918] i915 device info: unfenced_needs_alignment: no

<7> [791.186949] i915 device info: hws_needs_physical: no

<7> [791.186982] i915 device info: has_pooled_eu: no

<7> [791.187012] i915 device info: cursor_needs_physical: no

<7> [791.187044] i915 device info: has_cdclk_crawl: no

<7> [791.187075] i915 device info: has_cdclk_squash: no

<7> [791.187106] i915 device info: has_ddi: yes

<7> [791.187138] i915 device info: has_dp_mst: yes

<7> [791.187170] i915 device info: has_dsb: no

<7> [791.187201] i915 device info: has_fpga_dbg: yes

<7> [791.187233] i915 device info: has_gmch: no

<7> [791.187263] i915 device info: has_hotplug: yes

<7> [791.187294] i915 device info: has_hti: no

<7> [791.187325] i915 device info: has_ipc: yes

<7> [791.187420] i915 device info: has_overlay: no

<7> [791.187452] i915 device info: has_psr: yes

<7> [791.187482] i915 device info: has_psr_hw_tracking: yes

<7> [791.187514] i915 device info: overlay_needs_physical: no

<7> [791.187544] i915 device info: supports_tv: no

<7> [791.187576] i915 device info: has_hdcp: yes

<7> [791.187607] i915 device info: has_dmc: yes

<7> [791.187637] i915 device info: has_dsc: no

<7> [791.187667] i915 device info: rawclk rate: 24000 kHz

<7> [791.187704] i915 device info: iommu: enabled

<7> [791.187735] i915 device info: available engines: 40403

<7> [791.187769] i915 device info: slice total: 1, mask=0001

<7> [791.187804] i915 device info: subslice total: 3

<7> [791.187834] i915 device info: slice0: 3 subslices, mask=00000007

<7> [791.187872] i915 device info: slice1: 0 subslices, mask=00000000

<7> [791.187907] i915 device info: slice2: 0 subslices, mask=00000000

<7> [791.187937] i915 device info: EU total: 24

<7> [791.187969] i915 device info: EU per subslice: 8

<7> [791.187999] i915 device info: has slice power gating: no

<7> [791.188031] i915 device info: has subslice power gating: no

<7> [791.188061] i915 device info: has EU power gating: yes

<6> [791.188095] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [791.188132] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [791.188166] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [791.192861] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] disconnected

<7> [791.193099] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:95:eDP-1] EDID changed, epoch counter 2

<7> [791.207020] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [791.207264] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [791.213670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] status updated from unknown to disconnected

<7> [791.213977] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [791.214245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [791.215909] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [791.225501] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [791.225839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [791.226115] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [791.226322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [791.230030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to disconnected

<7> [791.231759] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [791.231999] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [791.232233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [791.236520] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] status updated from unknown to disconnected

<7> [791.236849] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [791.237120] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [791.238754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [791.240960] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] status updated from unknown to disconnected

<7> [791.241284] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [791.249539] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [791.249768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [791.253190] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] status updated from unknown to disconnected

<7> [791.254780] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [791.255059] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [791.255168] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [791.255222] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [791.255272] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [791.255318] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [791.256859] [drm:drm_client_modeset_probe] connector 125 enabled? no

<7> [791.256911] [drm:drm_client_modeset_probe] connector 129 enabled? no

<7> [791.256958] [drm:drm_client_modeset_probe] connector 135 enabled? no

<7> [791.261164] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [791.262688] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [791.263066] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [791.264704] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [791.294509] [drm:drm_client_modeset_probe]

<7> [791.297941] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [791.298542] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [791.301936] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] disconnected

<7> [791.302159] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [791.303753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [791.306835] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [791.307022] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [791.307188] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [791.310488] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [791.310706] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [791.310907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [791.314802] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [791.315019] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [791.315226] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [791.318548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [791.318756] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [791.318951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [791.328514] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [791.328737] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [791.328939] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [791.332079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [791.332287] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [791.333827] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [791.333892] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [791.333941] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [791.333986] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [791.334031] [drm:drm_client_modeset_probe] connector 125 enabled? no

<7> [791.334076] [drm:drm_client_modeset_probe] connector 129 enabled? no

<7> [791.334120] [drm:drm_client_modeset_probe] connector 135 enabled? no

<7> [791.337689] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [791.337926] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [791.338313] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [791.340073] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [791.342474] [drm:drm_client_modeset_probe]

<7> [791.345274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [791.345924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [791.353879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] disconnected

<7> [791.354108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [791.354320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [791.357814] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [791.358029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [791.358230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [791.360634] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [791.360851] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [791.361056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [791.365974] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [791.366200] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [791.366879] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [791.369070] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [791.369279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [791.369983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [791.372279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [791.372914] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [791.373120] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [791.376482] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [791.376711] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [791.376773] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [791.376825] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [791.376875] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [791.376923] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [791.376972] [drm:drm_client_modeset_probe] connector 125 enabled? no

<7> [791.377019] [drm:drm_client_modeset_probe] connector 129 enabled? no

<7> [791.377066] [drm:drm_client_modeset_probe] connector 135 enabled? no

<6> [791.377191] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100

<7> [791.378559] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [791.378729] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [791.379059] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [791.379325] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [791.452323] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [791.454266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [791.462463] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [791.470026] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [791.675857] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [791.681610] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [791.690583] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [791.692706] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [791.694832] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [791.697083] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [791.709514] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [791.712074] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [791.714128] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<6> [791.919124] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15

<6> [791.937626] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16

<6> [792.121571] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17

<7> [793.475559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [793.551739] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [793.553678] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [793.555937] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [793.556586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [793.557899] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [793.559123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [793.559913] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [793.560752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [793.563280] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [793.563399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [793.569586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [793.579006] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [793.759823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [793.779885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [793.780578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [793.782507] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 2

<7> [793.782791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [793.785658] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1

<7> [793.785317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [793.785895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [793.788230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [793.788926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [793.791536] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [793.791771] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [793.792322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [793.793574] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1

<7> [793.793799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [793.795606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1

<7> [793.795835] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [793.798565] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1

<7> [793.798264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [793.801195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [793.803845] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [793.819256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [793.821268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [793.823162] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [793.824987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [793.827563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [794.614726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [794.616579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [794.621179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [794.625071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [794.630543] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [794.656705] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [794.659627] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [794.665120] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [794.668608] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [794.673723] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [794.677098] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [794.680766] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [794.683479] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [794.685219] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [794.692959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [794.696601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [794.698896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [794.700959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [794.705031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [794.878979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [794.880478] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [794.882805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [794.885195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [794.887735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [794.889689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [794.891640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [794.893633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [794.953123] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [795.402844] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [795.412552] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [795.415768] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [795.419126] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [797.022682] [IGT] Reloading i915 as normal

<7> [798.762837] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [798.764844] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [798.767076] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [798.769316] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [798.772570] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [798.774610] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [798.781586] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [798.783445] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [798.785259] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [798.787040] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [798.787103] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [798.792063] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [798.792327] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [798.794429] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [798.799075] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7aaa68c0

<7> [798.801631] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [798.803765] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [798.805895] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [798.807994] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [798.810113] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [798.812241] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: LPDDR3

<7> [798.813980] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no

<7> [798.815606] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [798.817022] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [798.818592] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no

<7> [798.820280] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [798.821925] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [798.823930] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [798.825575] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [798.827538] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [798.833808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [798.836099] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212

<7> [798.838169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [798.840498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [798.842258] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [798.844446] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [798.846557] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [798.848219] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [798.850261] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [798.851977] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [798.854021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [798.855839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 22, min size 78)

<7> [798.857878] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [798.859523] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [798.861464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [798.863197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [798.865212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [798.867515] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [798.869556] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [798.871479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [798.873305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [798.879308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0

<7> [798.881732] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [798.884007] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0

<7> [798.886605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [798.888834] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [798.891126] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [798.893471] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [798.895876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [798.898772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [798.901312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [798.903680] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [798.906003] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [798.908416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [798.910660] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [798.913694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [798.915896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [798.918208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [798.920705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [798.923689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [798.926051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [798.928458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [798.930770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [798.933601] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [798.944702] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [798.946035] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [798.952316] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [798.954467] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [798.956687] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [798.959219] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [798.961545] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [798.963706] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [798.965927] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [798.968194] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [798.970544] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [798.972727] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [799.019661] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [799.038600] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [799.042022] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [799.044470] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [799.047083] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [799.049473] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [799.051751] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [799.054174] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [799.056467] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [799.058804] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [799.061033] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [799.063397] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [799.065678] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 25000 Hz, active high, min brightness 0, level 255, controller 0

<7> [799.067979] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [799.070927] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [799.073121] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [799.075206] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [799.077434] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [799.079015] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [799.081015] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [799.083221] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [799.087445] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [799.089053] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [799.090991] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [799.092837] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [799.094582] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [799.096499] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [799.309496] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00

<7> [799.311148] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-60-ad dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [799.313006] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 bb ff

<7> [799.316537] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [799.340052] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [799.340119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [799.340162] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [799.340763] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:95:eDP-1] using preferred EDID fixed mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [799.342726] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:95:eDP-1] Performing OUI wait (30 ms)

<7> [799.355042] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:95:eDP-1] DRRS type: none

<7> [799.357131] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:95:eDP-1] Using native PCH PWM for backlight control

<7> [799.358892] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:95:eDP-1] backlight initialized, disabled, brightness 0/100

<7> [799.361604] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [799.363495] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [799.365140] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [799.367071] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [799.368664] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [799.370633] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [799.374811] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:102:DDI B/PHY B] using AUX B (VBT)

<7> [799.376606] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B]

<7> [799.382288] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [799.385200] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B]

<7> [799.387068] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:102:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [799.391285] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI C/PHY C] using AUX C (platform default)

<7> [799.393035] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI C/PHY C]

<7> [799.396987] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [799.398901] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI C/PHY C]

<7> [799.400664] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [799.403552] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI D/PHY D] using AUX D (VBT)

<7> [799.405626] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI D/PHY D]

<7> [799.410030] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [799.411726] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI D/PHY D]

<7> [799.413223] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [799.416593] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present

<7> [799.421001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [799.422948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [799.425003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [799.427046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [799.428856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [799.430904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [799.433111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [799.435432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [799.437606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [799.439954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [799.442285] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [799.444638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [799.447001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [799.449477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [799.451560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A

<7> [799.453750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B

<7> [799.455835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C

<7> [799.458036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [799.460042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A

<7> [799.461734] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B

<7> [799.463731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C

<7> [799.465595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [799.467593] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A

<7> [799.469184] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B

<7> [799.471217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C

<7> [799.473035] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [799.475145] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [799.477426] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [799.479734] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [799.482627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled

<7> [799.485049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled

<7> [799.487559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [799.489983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled

<7> [799.492605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:125:HDMI-A-2] hw state readout: disabled

<7> [799.495088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-3] hw state readout: disabled

<7> [799.497506] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-3] hw state readout: disabled

<7> [799.499726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [799.501675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [799.503736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [799.505449] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [799.507518] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [799.509221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [799.511152] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [799.512783] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [799.514870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [799.516661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [799.519205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [799.524809] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [799.528733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [799.531273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [799.533519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [799.535808] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [799.538071] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [799.540093] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [799.542075] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [799.544779] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [799.546697] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [799.548682] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [799.550920] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [799.565692] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [799.567287] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [799.568978] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [799.586100] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0

<7> [799.594726] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0

<7> [799.602223] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0

<7> [799.743906] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [799.746920] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [799.748871] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [799.750472] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [799.752458] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [799.754414] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [799.760249] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [799.761700] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [799.762996] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [799.764702] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [799.825301] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:95:eDP-1] backlight device intel_backlight registered

<7> [799.828738] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [799.844021] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:eDP-1] generating connector hotplug event

<7> [799.851317] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [799.870108] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:103:DP-1] generating connector hotplug event

<7> [799.880000] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<7> [799.887499] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [799.900866] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event

<7> [799.907525] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:125:HDMI-A-2] generating connector hotplug event

<7> [799.917300] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-3

<7> [799.927831] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-3] generating connector hotplug event

<7> [799.935759] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-3] generating connector hotplug event

<6> [799.936820] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [799.966847] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected

<6> [799.977813] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [799.986554] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18

<7> [800.013985] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [800.024915] [drm:drm_client_modeset_probe]

<7> [800.028676] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [800.029203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [800.039902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [800.042155] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [800.045864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [800.049895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [800.052209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [800.055847] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [800.059593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [800.061894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [800.065472] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [800.071088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [800.071185] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [800.071254] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [800.073959] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [800.076518] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [800.082708] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [800.089782] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [800.091979] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [800.096743] i915 device info: pciid=0x591e rev=0x02 platform=KABYLAKE (subplatform=0x2) gen=9

<7> [800.096801] i915 device info: graphics version: 9

<7> [800.096835] i915 device info: media version: 9

<7> [800.096867] i915 device info: display version: 9

<7> [800.096898] i915 device info: graphics stepping: C0

<7> [800.096929] i915 device info: media stepping: C0

<7> [800.096960] i915 device info: display stepping: B0

<7> [800.096990] i915 device info: base die stepping: **

<7> [800.097051] i915 device info: memory-regions: 0x21

<7> [800.097083] i915 device info: page-sizes: 0x11000

<7> [800.097116] i915 device info: platform: KABYLAKE

<7> [800.097146] i915 device info: ppgtt-size: 48

<7> [800.097175] i915 device info: ppgtt-type: 2

<7> [800.097206] i915 device info: dma_mask_size: 39

<7> [800.097237] i915 device info: is_mobile: no

<7> [800.097267] i915 device info: is_lp: no

<7> [800.097298] i915 device info: require_force_probe: no

<7> [800.101071] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] status updated from unknown to connected

<7> [800.111148] i915 device info: is_dgfx: no

<7> [800.111196] i915 device info: has_64bit_reloc: yes

<7> [800.111231] i915 device info: has_64k_pages: no

<7> [800.111264] i915 device info: gpu_reset_clobbers_display: no

<7> [800.111296] i915 device info: has_reset_engine: yes

<7> [800.111325] i915 device info: has_3d_pipeline: yes

<7> [800.112933] i915 device info: has_4tile: no

<7> [800.112970] i915 device info: has_flat_ccs: no

<7> [800.113002] i915 device info: has_global_mocs: no

<7> [800.113032] i915 device info: has_gmd_id: no

<7> [800.113062] i915 device info: has_gt_uc: yes

<7> [800.113092] i915 device info: has_heci_pxp: no

<7> [800.113121] i915 device info: has_heci_gscfi: no

<7> [800.113151] i915 device info: has_guc_deprivilege: no

<7> [800.113181] i915 device info: has_l3_ccs_read: no

<7> [800.113210] i915 device info: has_l3_dpf: no

<7> [800.113239] i915 device info: has_llc: yes

<7> [800.113268] i915 device info: has_logical_ring_contexts: yes

<7> [800.113298] i915 device info: has_logical_ring_elsq: no

<7> [800.113328] i915 device info: has_media_ratio_mode: no

<7> [800.115437] i915 device info: has_mslice_steering: no

<7> [800.115476] i915 device info: has_oa_bpc_reporting: no

<7> [800.115507] i915 device info: has_oa_slice_contrib_limits: no

<7> [800.115539] i915 device info: has_oam: no

<7> [800.115569] i915 device info: has_one_eu_per_fuse_bit: no

<7> [800.115601] i915 device info: has_pxp: no

<7> [800.115630] i915 device info: has_rc6: yes

<7> [800.115662] i915 device info: has_rc6p: no

<7> [800.115693] i915 device info: has_rps: yes

<7> [800.115722] i915 device info: has_runtime_pm: yes

<7> [800.115754] i915 device info: has_snoop: no

<7> [800.115784] i915 device info: has_coherent_ggtt: yes

<7> [800.115813] i915 device info: tuning_thread_rr_after_dep: no

<7> [800.115845] i915 device info: unfenced_needs_alignment: no

<7> [800.115876] i915 device info: hws_needs_physical: no

<7> [800.115907] i915 device info: has_pooled_eu: no

<7> [800.115938] i915 device info: cursor_needs_physical: no

<7> [800.115969] i915 device info: has_cdclk_crawl: no

<7> [800.116000] i915 device info: has_cdclk_squash: no

<7> [800.116031] i915 device info: has_ddi: yes

<7> [800.116062] i915 device info: has_dp_mst: yes

<7> [800.116092] i915 device info: has_dsb: no

<7> [800.116123] i915 device info: has_fpga_dbg: yes

<7> [800.116153] i915 device info: has_gmch: no

<7> [800.116182] i915 device info: has_hotplug: yes

<7> [800.116213] i915 device info: has_hti: no

<7> [800.116243] i915 device info: has_ipc: yes

<7> [800.116274] i915 device info: has_overlay: no

<7> [800.116305] i915 device info: has_psr: yes

<7> [800.117729] i915 device info: has_psr_hw_tracking: yes

<7> [800.117782] i915 device info: overlay_needs_physical: no

<7> [800.117817] i915 device info: supports_tv: no

<7> [800.117851] i915 device info: has_hdcp: yes

<7> [800.117884] i915 device info: has_dmc: yes

<7> [800.117915] i915 device info: has_dsc: no

<7> [800.117947] i915 device info: rawclk rate: 24000 kHz

<7> [800.117982] i915 device info: iommu: enabled

<7> [800.118014] i915 device info: available engines: 40403

<7> [800.118050] i915 device info: slice total: 1, mask=0001

<7> [800.118086] i915 device info: subslice total: 3

<7> [800.118118] i915 device info: slice0: 3 subslices, mask=00000007

<7> [800.118156] i915 device info: slice1: 0 subslices, mask=00000000

<7> [800.118192] i915 device info: slice2: 0 subslices, mask=00000000

<7> [800.118226] i915 device info: EU total: 24

<7> [800.118258] i915 device info: EU per subslice: 8

<7> [800.118289] i915 device info: has slice power gating: no

<7> [800.118320] i915 device info: has subslice power gating: no

<7> [800.118920] i915 device info: has EU power gating: yes

<6> [800.118960] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [800.118996] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [800.119030] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [800.133193] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [800.133538] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [800.133636] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [800.133847] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [800.140447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] status updated from unknown to disconnected

<7> [800.140741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [800.140940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [800.141127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [800.199536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [800.222924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [800.223012] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [800.225285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [800.257883] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [800.257977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [800.271596] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [800.271924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [800.272128] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [800.272319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [800.274990] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to disconnected

<7> [800.275286] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [800.275717] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [800.275904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [800.330530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [800.349704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [800.349790] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [800.352046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [800.367166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [800.367260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [800.369599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] status updated from unknown to disconnected

<7> [800.369917] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [800.370114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [800.370307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [800.373042] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] status updated from unknown to disconnected

<7> [800.373502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [800.373703] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [800.373898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [800.428579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [800.450756] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [800.450844] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [800.453137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [800.473988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [800.474082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [800.476691] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] status updated from unknown to disconnected

<7> [800.477002] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [800.477190] [drm:drm_client_modeset_probe] connector 95 enabled? yes

<7> [800.477249] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [800.477297] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [800.477452] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [800.477500] [drm:drm_client_modeset_probe] connector 125 enabled? no

<7> [800.477547] [drm:drm_client_modeset_probe] connector 129 enabled? no

<7> [800.477591] [drm:drm_client_modeset_probe] connector 135 enabled? no

<7> [800.479090] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [800.479315] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95

<7> [800.479556] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0

<7> [800.479608] [drm:drm_client_modeset_probe] found mode 2400x1600

<7> [800.479653] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [800.479835] [drm:drm_client_modeset_probe] desired mode 2400x1600 set on crtc 51 (0,0)

<7> [800.481028] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<7> [800.481880] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one

<7> [800.513927] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2400x1600 fb: 0x00100000

<6> [800.529540] fbcon: i915drmfb (fb0) is primary device

<6> [800.535946] Console: switching to colour frame buffer device 300x100

<6> [800.536134] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [800.546665] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]

<7> [800.546902] [drm:drm_client_modeset_probe]

<7> [800.550250] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [800.552791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [800.571940] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [800.574085] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [800.580778] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [800.587937] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [800.592981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [800.593054] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [800.593103] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [800.601567] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [800.603956] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [800.615790] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [800.617628] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [800.623142] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [800.623493] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [800.623585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [800.623788] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<6> [800.642884] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100

<7> [800.652738] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [800.652981] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [800.653187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [800.704840] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [800.716200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [800.744955] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [800.745046] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [800.747529] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [800.762781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [800.762870] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [800.765268] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [800.765919] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [800.766133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [800.768841] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [800.769059] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [800.769259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [800.823549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [800.840548] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [800.840637] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [800.843841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [800.863036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [800.863131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [800.865631] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [800.865854] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [800.866055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [800.868817] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [800.869040] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [800.869243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [800.924532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [800.943723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [800.943811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [800.947512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [800.968552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [800.968644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [800.972608] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [800.972835] [drm:drm_client_modeset_probe] connector 95 enabled? yes

<7> [800.972896] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [800.972946] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [800.972992] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [800.973038] [drm:drm_client_modeset_probe] connector 125 enabled? no

<7> [800.973085] [drm:drm_client_modeset_probe] connector 129 enabled? no

<7> [800.973132] [drm:drm_client_modeset_probe] connector 135 enabled? no

<7> [800.976749] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [800.976991] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95

<7> [800.977049] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0

<7> [800.977100] [drm:drm_client_modeset_probe] found mode 2400x1600

<7> [800.977147] [drm:drm_client_modeset_probe] picking CRTCs for 2400x1600 config

<7> [800.981059] [drm:drm_client_modeset_probe] desired mode 2400x1600 set on crtc 51 (0,0)

<6> [800.982889] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [800.984909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [800.989690] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [800.995116] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [800.996669] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [801.005829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [801.009776] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [801.011723] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [801.013577] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [801.015716] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [801.015793] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [801.015853] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [801.016081] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [801.017866] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [801.025456] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [801.042520] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [801.047221] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [801.047495] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [801.048861] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [801.049066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [801.053641] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [801.060108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [801.060484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [801.127578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [801.146881] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [801.149077] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [801.156519] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [801.158609] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [801.160830] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [801.163714] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [801.171498] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [801.172963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [801.173036] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [801.174938] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [801.176032] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [801.179260] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [801.203454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [801.203544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [801.205687] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [801.207266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [801.207604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [801.209884] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [801.211284] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [801.211597] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [801.267531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<6> [801.281987] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19

<6> [801.299583] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20

<7> [801.303702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [801.303784] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [801.305661] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<6> [801.314409] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21

<7> [801.329696] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [801.329777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [801.331734] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [801.335170] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [801.336551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [801.339626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [801.341556] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [801.341763] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [801.401688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [801.513610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [801.513693] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [801.521525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [801.540630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [801.540711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [801.544890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [801.651725] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [801.651956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [801.664848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [801.709217] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [801.709897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [801.763652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [801.790917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [801.791003] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [801.795080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [801.831568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [801.831651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [801.834599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [801.856609] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [801.856842] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [801.860111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [801.871246] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [801.871576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [801.924571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [801.941284] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [801.941462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [801.947634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [801.962154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [801.962238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [801.964749] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [801.975825] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [801.976033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [801.978903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [801.990145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [801.990468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [802.043711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [802.076012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [802.076133] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [802.088500] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [802.105594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [802.105676] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [802.111652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [802.121661] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [802.121889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [802.139084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [802.141215] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [802.148712] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [802.151880] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [802.156969] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [802.157051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [802.157112] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [802.158792] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [802.164499] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [802.171049] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [802.174796] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [802.182198] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [802.182470] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [802.182806] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [802.183007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [802.192169] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [802.194261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [802.194556] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [802.250571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [802.270682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [802.270764] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [802.277499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [802.299880] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [802.299962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [802.308546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [802.309056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [802.309247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [802.313541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [802.314004] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [802.314195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [802.373980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [802.405730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [802.405812] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [802.410740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [802.443082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [802.443167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [802.449887] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [802.463594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [802.463829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [802.467768] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [802.468247] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [802.469971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [802.525603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [802.552784] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [802.552865] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [802.580686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [802.616438] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [802.616519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [802.619789] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [802.624520] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:138]

<7> [802.898735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [803.915907] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [803.919564] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [803.922092] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [805.199161] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [805.201721] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [805.203928] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [805.204036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [805.205405] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [805.207205] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [805.207548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [805.209248] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [805.210072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [805.213207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [805.219003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [805.228891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [805.346113] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [805.346966] [drm:drm_mode_setcrtc] [CONNECTOR:95:eDP-1]

<7> [805.348182] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [805.350147] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 270000 max bpp 24 pixel clock 252750KHz

<7> [805.351523] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 270000 bpp 24

<7> [805.353153] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 758250 available 1080000

<7> [805.358507] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:95:eDP-1] SDP split enable: no

<7> [805.359936] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [805.361469] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:94:DDI A/PHY A] [CRTC:51:pipe A]

<7> [805.363213] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [805.364740] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [805.366692] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [805.368635] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [805.370577] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5889501/8388608 link 490791/524288)

<7> [805.372069] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [805.373943] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [805.375890] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2400)

<7> [805.377321] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2560)

<7> [805.379080] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2400)

<7> [805.380545] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2560)

<7> [805.382072] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2448)

<7> [805.383542] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2480)

<7> [805.385677] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600)

<7> [805.387061] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1646)

<7> [805.388873] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600)

<7> [805.390309] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1646)

<7> [805.392105] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1603)

<7> [805.393590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1613)

<7> [805.395322] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2400)

<7> [805.396788] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2560)

<7> [805.398686] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2400)

<7> [805.400140] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2560)

<7> [805.401961] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2448)

<7> [805.403505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2480)

<7> [805.405456] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600)

<7> [805.407209] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1646)

<7> [805.408825] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600)

<7> [805.410733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1646)

<7> [805.412213] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1603)

<7> [805.414022] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1613)

<7> [805.415601] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [805.417436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [805.418882] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [805.420671] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000003)

<7> [805.422103] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [805.423874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 252750)

<7> [805.425291] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 252750)

<7> [805.427076] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 270000)

<7> [805.428509] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [805.430751] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [805.432731] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [805.434282] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [805.435657] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [805.437488] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0

<7> [805.439002] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0

<7> [805.440778] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0

<7> [805.442601] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (252750 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz)

<7> [805.444470] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (15797 kHz) > old min cdclk (0 kHz)

<7> [805.446003] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [805.447793] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [805.449221] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0

<7> [805.451000] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 0

<7> [805.452549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset]

<7> [805.454286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [805.455794] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [805.457568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [805.459022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [805.460834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [805.462284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [805.464057] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 5889501, data_n: 8388608, link_m: 490791, link_n: 524288, tu: 64

<7> [805.465641] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [805.467476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [805.468957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [805.470863] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0

<7> [805.470894] i915 0000:00:02.0: pixelformat: RGB

<7> [805.470918] i915 0000:00:02.0: colorimetry: sRGB

<7> [805.470941] i915 0000:00:02.0: bpc: 0

<7> [805.470963] i915 0000:00:02.0: dynamic range: VESA range

<7> [805.471025] i915 0000:00:02.0: content type: Not defined

<7> [805.471049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [805.472548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [805.474265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [805.475793] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa

<7> [805.477722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x40 0xa

<7> [805.479169] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa

<7> [805.480772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 270000, pipe src: 2400x1600+0+0, pixel rate 252750

<7> [805.482251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 82, ips linetime: 0

<7> [805.484043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [805.486191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [805.488849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [805.490635] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0

<7> [805.492220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [805.494534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [805.496808] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [805.498802] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [805.500806] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [805.502785] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [805.504780] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [805.506782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:138] 2400x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [805.508819] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [805.510816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2400.000000x1600.000000+0.000000+0.000000 dst: 2400x1600+0+0

<7> [805.512860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [805.514845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [805.529714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [805.548626] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [805.566079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [805.570207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [805.573857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [805.577487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A]

<7> [805.579464] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B]

<7> [805.581676] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A]

<7> [805.583587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B]

<7> [805.585485] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C]

<7> [805.587431] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C]

<7> [805.589414] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [805.591318] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [805.593245] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [805.595736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D]

<7> [805.597688] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [805.599943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [805.601868] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [805.603458] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [805.605897] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [805.607701] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [805.609295] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [805.611549] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:51:pipe A]

<7> [805.613082] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [805.615474] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power on

<7> [805.617483] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [805.809799] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [805.811270] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [805.812644] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power on

<7> [805.814676] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [805.875670] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [805.876984] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [805.878235] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [805.879618] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [806.014512] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [806.016635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [806.018952] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [806.023682] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [806.025720] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [806.034473] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00

<7> [806.035669] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using LINK_BW_SET value 0a

<7> [806.039163] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [806.041101] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [806.043001] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [806.048691] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Clock recovery OK

<7> [806.050522] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [806.055691] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 1/1/1/1

<7> [806.057482] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 1/1/1/1

<7> [806.059444] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 01000000

<7> [806.064499] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 2/2/2/2

<7> [806.065815] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 2/2/2/2

<7> [806.067262] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 02000000

<7> [806.072780] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 0/0/0/0

<7> [806.074706] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [806.076157] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [806.081487] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [806.082807] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [806.085684] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [806.088984] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [806.090681] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [806.093214] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 100

<7> [806.099155] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 412 us, max time under evasion is 250 us

<7> [806.107263] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [806.116147] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1]

<7> [806.117856] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [806.120589] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<7> [806.123843] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [806.126907] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [806.126898] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [806.135666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [806.137562] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [806.139514] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [806.141446] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [806.144821] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [806.144912] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [806.144985] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [806.145506] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [806.148034] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [806.152255] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [806.154431] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [806.159567] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 1

<7> [806.159918] [drm:drm_mode_setcrtc] [CONNECTOR:95:eDP-1]

<7> [806.176470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [806.179542] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1

<7> [806.179790] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [806.242531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [806.257615] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [806.257696] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [806.259610] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [806.274601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [806.274679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [806.276587] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [806.276825] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [806.278874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [806.279107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [806.332625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [806.344827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [806.344888] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [806.346257] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [806.358105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [806.358163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [806.359562] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1

<7> [806.359798] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [806.361418] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1

<7> [806.361610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [806.414627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [806.428271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [806.428487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [806.430174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [806.442722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [806.442785] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [806.444168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1

<7> [806.448108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [806.448264] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [806.451615] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [806.453527] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [806.455459] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [806.457275] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [806.459528] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [806.459606] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [806.459667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [806.459895] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [806.461708] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [806.465295] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [806.467175] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [806.471211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [806.471608] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [806.472628] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [806.472784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [806.474682] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [806.475692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [806.475884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [806.528587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [806.539758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [806.539823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [806.541469] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [806.552685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [806.552763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [806.554455] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [806.555640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [806.555777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [806.557848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [806.558857] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [806.558991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [806.611591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [806.624609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [806.624672] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [806.626792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [806.638948] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [806.639007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [806.640481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [806.641878] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [806.642029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [806.643678] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [806.645868] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [806.646014] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [806.698524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [806.712794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [806.712871] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [806.715741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [806.729196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [806.729258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [806.730626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [806.735052] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [806.736168] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [806.737803] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [806.739303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [806.741012] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [806.742522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5889501/8388608 link 490791/524288, found tu 0, data 0/0 link 0/0)

<7> [806.744146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [806.745629] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [806.747158] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2400, found 0)

<7> [806.748628] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2560, found 0)

<7> [806.750145] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2400, found 0)

<7> [806.751792] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2560, found 0)

<7> [806.753718] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2448, found 0)

<7> [806.755747] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2480, found 0)

<7> [806.757978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0)

<7> [806.759991] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1646, found 0)

<7> [806.762285] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0)

<7> [806.764040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1646, found 0)

<7> [806.765574] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1603, found 0)

<7> [806.767181] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1613, found 0)

<7> [806.769775] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2400, found 0)

<7> [806.771762] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2560, found 0)

<7> [806.773836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2400, found 0)

<7> [806.775819] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2560, found 0)

<7> [806.777813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2448, found 0)

<7> [806.779878] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2480, found 0)

<7> [806.782110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0)

<7> [806.784150] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1646, found 0)

<7> [806.786463] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0)

<7> [806.788045] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1646, found 0)

<7> [806.790325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1603, found 0)

<7> [806.792152] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1613, found 0)

<7> [806.793795] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [806.796011] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [806.798255] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [806.800302] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [806.802441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 252750, found 0)

<7> [806.804476] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 252750, found 0)

<7> [806.806512] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 270000, found 0)

<7> [806.808478] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [806.811144] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0

<7> [806.813903] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [806.816038] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [806.818027] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [806.819942] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [806.822026] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [806.823907] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [806.825793] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [806.827953] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [806.829994] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [806.832717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [806.834481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [806.836812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [806.838596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [806.841102] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [806.851320] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [807.057625] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0

<7> [807.059466] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [807.067721] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off

<7> [807.069090] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [807.070761] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [807.119626] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [807.121113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [807.121593] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [807.123327] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [807.123567] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [807.125445] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [807.125863] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [807.127493] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [807.127906] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A]

<7> [807.129897] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B]

<7> [807.131759] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A]

<7> [807.133594] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B]

<7> [807.135484] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C]

<7> [807.137315] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C]

<7> [807.139118] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [807.140932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [807.142789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [807.162498] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D]

<7> [807.165835] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [807.169163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [807.172442] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [807.179507] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1]

<7> [807.183140] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [807.186620] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [807.190583] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [807.196614] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [807.202978] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [807.213867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [807.215876] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [807.222544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [807.230298] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [807.236165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [807.242468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [807.245050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [807.254550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [807.257890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [807.266072] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [807.273743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [807.276150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [807.284097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [807.287537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [807.290831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [807.314801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [807.320948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [807.333737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [807.403928] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [807.404166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [807.430948] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [807.462174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [807.465510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [807.467642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [807.470642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [807.475464] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [807.477062] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [807.729810] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [807.731729] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [807.733748] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [807.735583] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [807.796751] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [807.798189] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [807.799518] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [807.800946] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [807.947097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [807.948963] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [807.950876] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [807.952703] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [807.954854] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [807.954934] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [807.954996] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [807.955226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [807.957048] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [807.961304] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [807.963601] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [807.967866] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [807.968068] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [807.968325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [807.972004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [807.973830] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [807.975671] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [807.977469] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [807.979754] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [807.979837] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [807.979905] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [807.980165] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [807.982626] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [807.986567] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [807.988471] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [807.992139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 1

<7> [807.992463] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [807.996950] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1

<7> [807.997199] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [808.053570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [808.068245] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [808.068517] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [808.070472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [808.085056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [808.085138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [808.086937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [808.087109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [808.089282] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [808.089670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [808.148743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [808.163688] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [808.163765] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [808.165673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [808.180306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [808.180490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [808.182500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1

<7> [808.182739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [808.184944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1

<7> [808.185172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [808.239536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [808.253619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [808.253698] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [808.255628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [808.270307] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [808.270543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [808.273023] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1

<7> [808.274942] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [808.275113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [808.277745] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [808.278870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [808.279072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [808.332592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [808.345796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [808.345855] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [808.348123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [808.359031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [808.359088] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [808.360461] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [808.361661] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [808.361794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [808.363921] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [808.365617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [808.365828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [808.419516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [808.432746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [808.432819] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [808.434643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [808.446074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [808.446137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [808.447554] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [808.448785] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [808.448926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [808.450595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [808.451597] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [808.451788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [808.503576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [808.516818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [808.516890] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [808.518738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [808.531829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [808.531905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [808.533835] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [811.017695] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [811.019703] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [811.021587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [811.021929] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [811.023680] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [811.024089] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [811.025317] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [811.026181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [811.027579] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [811.029277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [811.031580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [811.040984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [811.145224] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [811.146120] [drm:drm_mode_setcrtc] [CONNECTOR:95:eDP-1]

<7> [811.147309] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:95:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [811.149701] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 270000 max bpp 24 pixel clock 252750KHz

<7> [811.151544] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 270000 bpp 24

<7> [811.153328] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 758250 available 1080000

<7> [811.155240] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:95:eDP-1] SDP split enable: no

<7> [811.157053] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [811.159087] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:94:DDI A/PHY A] [CRTC:51:pipe A]

<7> [811.160906] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [811.162881] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [811.164812] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [811.166768] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [811.168707] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5889501/8388608 link 490791/524288)

<7> [811.170676] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [811.172488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [811.173901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2400)

<7> [811.175790] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2560)

<7> [811.177757] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2400)

<7> [811.179743] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2560)

<7> [811.181716] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2448)

<7> [811.183653] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2480)

<7> [811.185624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600)

<7> [811.187564] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1646)

<7> [811.189528] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600)

<7> [811.191503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1646)

<7> [811.193591] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1603)

<7> [811.195489] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1613)

<7> [811.197422] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2400)

<7> [811.199257] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2560)

<7> [811.200834] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2400)

<7> [811.202563] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2560)

<7> [811.204044] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2448)

<7> [811.205777] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2480)

<7> [811.207281] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600)

<7> [811.209151] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1646)

<7> [811.211031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600)

<7> [811.212894] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1646)

<7> [811.214762] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1603)

<7> [811.216624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1613)

<7> [811.218305] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [811.219999] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [811.221436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [811.223125] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [811.224750] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 252750)

<7> [811.226473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 252750)

<7> [811.227895] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 270000)

<7> [811.229736] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [811.231707] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [811.233454] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [811.234727] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [811.236575] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [811.238288] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0

<7> [811.240173] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0

<7> [811.242061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0

<7> [811.244171] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (252750 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz)

<7> [811.246174] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (15797 kHz) > old min cdclk (0 kHz)

<7> [811.248190] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [811.250221] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [811.252273] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 0

<7> [811.254263] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 0

<7> [811.256302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset]

<7> [811.258321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [811.260323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [811.262297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [811.264023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [811.265648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [811.267441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [811.268984] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 5889501, data_n: 8388608, link_m: 490791, link_n: 524288, tu: 64

<7> [811.270484] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [811.272051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [811.273738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [811.275278] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0

<7> [811.275323] i915 0000:00:02.0: pixelformat: RGB

<7> [811.275455] i915 0000:00:02.0: colorimetry: sRGB

<7> [811.275490] i915 0000:00:02.0: bpc: 0

<7> [811.275526] i915 0000:00:02.0: dynamic range: VESA range

<7> [811.275563] i915 0000:00:02.0: content type: Not defined

<7> [811.275601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [811.277472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [811.279216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [811.280977] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa

<7> [811.282495] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x40 0xa

<7> [811.284438] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=252750, hd=2400 hb=2400-2560 hs=2448-2480 ht=2560, vd=1600 vb=1600-1646 vs=1603-1613 vt=1646, flags=0xa

<7> [811.285979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 270000, pipe src: 2400x1600+0+0, pixel rate 252750

<7> [811.287763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 82, ips linetime: 0

<7> [811.289172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [811.291022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [811.292937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [811.294539] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0

<7> [811.296166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [811.298109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [811.299736] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [811.301954] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [811.303984] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [811.306220] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [811.308218] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [811.310220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:138] 2400x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [811.312465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [811.314472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2400.000000x1600.000000+0.000000+0.000000 dst: 2400x1600+0+0

<7> [811.316669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [811.318765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [811.332863] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [811.347759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [811.349836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [811.351711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [811.353590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [811.356121] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A]

<7> [811.357508] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B]

<7> [811.358881] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A]

<7> [811.360326] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B]

<7> [811.361688] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C]

<7> [811.363155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C]

<7> [811.364538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [811.366259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [811.367700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [811.369479] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D]

<7> [811.371160] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [811.372590] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [811.374020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [811.375488] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [811.377137] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [811.378692] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [811.380165] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [811.381890] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:51:pipe A]

<7> [811.383281] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [811.384964] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power on

<7> [811.386240] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [811.625785] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [811.627190] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [811.628620] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power on

<7> [811.630738] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [811.691748] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [811.693162] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [811.694498] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [811.695874] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [811.829575] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [811.831068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [811.832875] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [811.835228] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [811.837151] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [811.842648] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00

<7> [811.843741] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using LINK_BW_SET value 0a

<7> [811.847572] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [811.849099] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [811.850509] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [811.854937] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Clock recovery OK

<7> [811.856237] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [811.861051] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 1/1/1/1

<7> [811.862509] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 1/1/1/1

<7> [811.863926] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 01000000

<7> [811.868733] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 2/2/2/2

<7> [811.870044] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 2/2/2/2

<7> [811.871521] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 02000000

<7> [811.877132] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 0/0/0/0, pre-emphasis request: 0/0/0/0

<7> [811.878501] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [811.879883] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [811.884999] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [811.886240] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:95:eDP-1][ENCODER:94:DDI A/PHY A][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [811.888665] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [811.890737] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [811.892227] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [811.893858] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 100

<7> [811.907732] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [811.912015] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1]

<7> [811.913610] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [811.916219] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [811.918934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [811.922276] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [811.923780] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [811.925775] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [811.927561] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [811.929573] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [811.929662] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [811.929730] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [811.929993] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [811.931831] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [811.936620] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [811.938470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [811.942209] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:eDP-1] Same epoch counter 1

<7> [811.942535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [811.944714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:103:DP-1] Same epoch counter 1

<7> [811.944948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [811.997609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [812.011178] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [812.011263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [812.013215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [812.026925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [812.026991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [812.028504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [812.028749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [812.031007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [812.031229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [812.084580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [812.098180] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [812.098243] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [812.100085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [812.112033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [812.112118] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [812.114059] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] Same epoch counter 1

<7> [812.114295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [812.116466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:129:DP-3] Same epoch counter 1

<7> [812.116691] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [812.170579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [812.183855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [812.183917] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [812.185229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [812.196812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [812.196871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [812.198170] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] Same epoch counter 1

<7> [812.198602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [812.198804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [812.201978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [812.203301] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [812.204634] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [812.207033] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [812.208740] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [812.208818] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [812.208878] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [812.209080] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [812.210479] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [812.216230] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [812.217726] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [812.221093] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [812.221233] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [812.222524] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [812.222721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [812.224161] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [812.226182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [812.226498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [812.280524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [812.295861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [812.295922] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [812.297711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [812.311454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [812.311535] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [812.313057] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [812.314279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [812.314544] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [812.316853] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [812.318309] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [812.318524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [812.370577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [812.381844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [812.381902] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [812.383204] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [812.393915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [812.393970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [812.395257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [812.396588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [812.396724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [812.398173] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [812.399136] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [812.399259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [812.452624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [812.463153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [812.463211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [812.464490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [812.475295] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [812.475445] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [812.477212] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [812.481008] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:138] from all active usage due to RMFB ioctl

<7> [812.481744] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:138] is removed

<7> [812.482495] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [812.484437] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [812.486319] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [812.488509] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [812.490221] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [812.493053] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [812.532069] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [812.533552] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [812.535079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0

<7> [812.536953] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0

<7> [812.538903] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0

<7> [812.553005] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 523 us, max time under evasion is 250 us

<7> [812.567734] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [812.577048] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]

<7> [812.577205] [drm:drm_client_modeset_probe]

<7> [812.580029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1]

<7> [812.581446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]

<7> [812.588965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:94:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [812.590247] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [812.591804] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [812.593577] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [812.596643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [812.596729] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD monitor

<7> [812.596795] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:eDP-1] ELD size 20, SAD count 0

<7> [812.597166] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] VRR capable: no

<7> [812.599050] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [812.603505] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [812.605424] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:95:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [812.610619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:eDP-1] probed modes :

<7> [812.610869] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa

<7> [812.610959] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1]

<7> [812.611162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]

<7> [812.614209] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:103:DP-1] disconnected

<7> [812.614508] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [812.614711] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [812.668530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [812.683112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [812.683196] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [812.685056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [812.699464] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [812.699542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [812.701517] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [812.701733] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [812.701930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [812.703957] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [812.704162] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2]

<7> [812.704465] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]

<7> [812.758626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [812.772010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [812.772091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [812.774744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [812.791240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [812.792178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [812.794165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:125:HDMI-A-2] disconnected

<7> [812.794606] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3]

<7> [812.794814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-3]

<7> [812.796893] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:129:DP-3] disconnected

<7> [812.797102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3]

<7> [812.797298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-3]

<7> [812.851526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [812.866185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [812.866268] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [812.868111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [812.882539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [812.882619] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [812.884574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:135:HDMI-A-3] disconnected

<7> [812.884783] [drm:drm_client_modeset_probe] connector 95 enabled? yes

<7> [812.884838] [drm:drm_client_modeset_probe] connector 103 enabled? no

<7> [812.884887] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [812.884932] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [812.884975] [drm:drm_client_modeset_probe] connector 125 enabled? no

<7> [812.885018] [drm:drm_client_modeset_probe] connector 129 enabled? no

<7> [812.885063] [drm:drm_client_modeset_probe] connector 135 enabled? no

<7> [812.886673] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [812.886900] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 95

<7> [812.886951] [drm:drm_client_modeset_probe] looking for preferred mode on connector 95 0

<7> [812.886998] [drm:drm_client_modeset_probe] found mode 2400x1600

<7> [812.887042] [drm:drm_client_modeset_probe] picking CRTCs for 2400x1600 config

<7> [812.887482] [drm:drm_client_modeset_probe] desired mode 2400x1600 set on crtc 51 (0,0)

<6> [812.931536] Console: switching to colour dummy device 80x25

<7> [813.390225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [813.396104] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [813.412510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [813.443176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [813.445621] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [813.461580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [813.792559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [813.831299] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [813.851776] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [813.853900] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [813.857182] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [813.860915] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [813.862961] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [813.866256] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [813.868788] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [813.872967] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [813.887221] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [813.894672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [814.090282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [814.091911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [814.093475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [814.095784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [814.111028] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [814.113286] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [814.115316] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [814.117563] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [814.119583] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5889501/8388608 link 490791/524288, found tu 0, data 0/0 link 0/0)

<7> [814.121767] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [814.125198] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [814.127462] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2400, found 0)

<7> [814.129664] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2560, found 0)

<7> [814.131677] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2400, found 0)

<7> [814.133841] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2560, found 0)

<7> [814.135829] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2448, found 0)

<7> [814.137975] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2480, found 0)

<7> [814.140005] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0)

<7> [814.142166] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1646, found 0)

<7> [814.144191] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0)

<7> [814.146620] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1646, found 0)

<7> [814.148635] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1603, found 0)

<7> [814.150735] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1613, found 0)

<7> [814.153813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2400, found 0)

<7> [814.155845] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2560, found 0)

<7> [814.157858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2400, found 0)

<7> [814.159852] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2560, found 0)

<7> [814.161771] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2448, found 0)

<7> [814.163996] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2480, found 0)

<7> [814.165940] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0)

<7> [814.167899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1646, found 0)

<7> [814.169769] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0)

<7> [814.171692] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1646, found 0)

<7> [814.173837] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1603, found 0)

<7> [814.175986] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1613, found 0)

<7> [814.177783] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [814.179672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [814.181456] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [814.183543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [814.185256] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 252750, found 0)

<7> [814.186772] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 252750, found 0)

<7> [814.188258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 270000, found 0)

<7> [814.189655] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [814.191509] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 0

<7> [814.193774] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [814.195671] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [814.197491] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [814.198963] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [814.200707] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 3, 4, 4, 7, 8, 9, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [814.202154] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 13, 48, 66, 74, 135, 162, 174, 206, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [814.203714] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 14, 49, 67, 75, 136, 163, 175, 207, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [814.205766] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [814.207735] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [814.209607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [814.211607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [814.213625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [814.215716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [814.219144] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [814.228562] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [814.433686] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:95:eDP-1] set backlight PWM = 0

<7> [814.437278] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [814.454170] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turn panel power off

<7> [814.456158] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [814.458215] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [814.506518] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [814.508626] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010

<7> [814.509250] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [814.509974] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:94:DDI A/PHY A] - long

<7> [814.511316] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [814.511619] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [814.513071] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:94:DDI A/PHY A]

<7> [814.513608] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI A/PHY A]

<7> [814.515600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:102:DDI B/PHY B]

<7> [814.517149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:104:DP-MST A]

<7> [814.519067] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DP-MST B]

<7> [814.520968] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:106:DP-MST C]

<7> [814.522909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI C/PHY C]

<7> [814.524863] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [814.526785] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [814.528696] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [814.530595] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI D/PHY D]

<7> [814.532504] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [814.534721] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [814.536612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [814.538548] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:95:eDP-1]

<7> [814.540645] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [814.542727] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [814.544800] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [814.546888] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [814.549489] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [814.598202] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [815.084024] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [815.097545] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [815.113927] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [815.115960] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [816.758997] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [816.768627] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload