igt@i915_selftest@live@mman on fi-kbl-guc@linus-v6.5-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gfaa966f69 (x86_64) (Linux: 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ x86_64)
Out	Starting dynamic subtest: mman Dynamic subtest mman: SUCCESS (4.191s)
Err	Starting dynamic subtest: mman Dynamic subtest mman: SUCCESS (4.191s)
Dmesg	<6> [200.123526] [IGT] i915_selftest: starting dynamic subtest mman <5> [200.231627] Setting dangerous option enable_guc - tainting kernel <5> [200.231635] Setting dangerous option live_selftests - tainting kernel <7> [200.276494] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [200.276713] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [200.276875] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [200.276909] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [200.277055] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [200.277263] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [200.277388] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [200.277985] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [200.278104] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [200.278206] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [200.278305] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [200.278310] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [200.279159] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [200.279183] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [200.279343] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [200.279680] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018 <7> [200.279834] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [200.279979] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [200.280106] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [200.280232] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [200.286560] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [200.286709] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [200.286846] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [200.286993] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [200.287130] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [200.287236] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [200.287337] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [200.287435] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [200.287534] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [200.287632] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [200.287750] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [200.287874] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [200.287991] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [200.288081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [200.288641] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [200.288847] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [200.289024] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [200.289167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [200.289326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [200.289527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [200.289727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [200.289942] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [200.290146] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [200.290319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [200.290465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [200.290605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [200.290740] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [200.290892] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [200.291065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [200.291267] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [200.291465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [200.291668] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [200.291844] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.291999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [200.292135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.292271] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [200.292440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [200.292635] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [200.292828] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [200.293049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [200.293268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [200.293425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [200.293563] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [200.294111] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [200.294308] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [200.294523] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [200.294728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.294880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.295015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [200.295161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.295366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [200.295562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [200.295758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [200.295967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [200.296199] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [200.297154] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [200.297466] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [200.297949] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [200.298143] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [200.298333] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [200.298487] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [200.298651] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [200.298837] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [200.299035] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [200.299225] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [200.299411] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [200.299582] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [200.301363] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [200.302871] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [200.303137] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not present <7> [200.303361] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [200.303560] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [200.303746] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [200.304254] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default) <7> [200.304394] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [200.304569] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [200.304867] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port D is not present <7> [200.305088] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] using AUX A (VBT) <7> [200.305289] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E] <7> [200.305637] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [200.306187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [200.306421] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [200.306597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [200.306798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [200.307009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [200.307210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [200.307409] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [200.307610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [200.307809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [200.308019] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [200.308219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [200.308420] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [200.308590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [200.308766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [200.308979] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A <7> [200.309181] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [200.309385] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [200.309588] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [200.309752] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [200.309992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [200.310205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [200.310414] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [200.310604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [200.310794] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [200.310995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [200.311185] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [200.311385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [200.311576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [200.311766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [200.311965] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [200.312165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [200.312357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [200.312546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [200.312736] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [200.312982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [200.313182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [200.313381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [200.313581] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [200.313775] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.313978] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.314168] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.318301] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [200.318492] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [200.318659] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [200.318839] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [200.319046] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [200.320457] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [200.320655] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [200.320850] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [200.324593] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [200.324831] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [200.325067] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [200.365020] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [200.365211] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [200.365351] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [200.365489] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [200.365627] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [200.365765] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004 <7> [200.365914] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [200.366100] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [200.366284] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [200.366469] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [200.366659] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [200.366826] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [200.366980] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [200.367110] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [200.367240] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [200.368457] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [200.368463] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [200.375443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [200.376112] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [200.376320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [200.376324] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [200.383815] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [200.384076] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [200.384216] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [200.384352] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [200.384487] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [200.384643] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [200.385163] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [200.385323] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [200.385474] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [200.385628] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [200.388661] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [200.389192] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [200.389684] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1 <7> [200.390558] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <6> [200.390630] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [200.393310] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [200.409085] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [200.410054] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input63 <7> [200.410912] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [200.411689] [drm:drm_client_modeset_probe] <7> [200.411747] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [200.411687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [200.411771] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [200.411925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [200.412128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [200.412243] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [200.412272] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [200.412291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [200.412308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [200.412330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [200.412494] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [200.412518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [200.412535] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [200.412553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [200.412737] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [200.412761] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [200.412778] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.412784] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.412788] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [200.412792] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [200.412812] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.412824] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.412852] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [200.412883] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [200.413079] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [200.413277] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [200.413282] i915 device info: graphics version: 9 <7> [200.413285] i915 device info: media version: 9 <7> [200.413288] i915 device info: display version: 9 <7> [200.413290] i915 device info: graphics stepping: F0 <7> [200.413293] i915 device info: media stepping: F0 <7> [200.413296] i915 device info: display stepping: C0 <7> [200.413299] i915 device info: base die stepping: ** <7> [200.413302] i915 device info: gt: 2 <7> [200.413305] i915 device info: memory-regions: 0x21 <7> [200.413307] i915 device info: page-sizes: 0x11000 <7> [200.413310] i915 device info: platform: KABYLAKE <7> [200.413313] i915 device info: ppgtt-size: 48 <7> [200.413316] i915 device info: ppgtt-type: 2 <7> [200.413319] i915 device info: dma_mask_size: 39 <7> [200.413322] i915 device info: is_mobile: no <7> [200.413324] i915 device info: is_lp: no <7> [200.413327] i915 device info: require_force_probe: no <7> [200.413330] i915 device info: is_dgfx: no <7> [200.413333] i915 device info: has_64bit_reloc: yes <7> [200.413336] i915 device info: has_64k_pages: no <7> [200.413339] i915 device info: gpu_reset_clobbers_display: no <7> [200.413341] i915 device info: has_reset_engine: yes <7> [200.413344] i915 device info: has_3d_pipeline: yes <7> [200.413347] i915 device info: has_4tile: no <7> [200.413350] i915 device info: has_flat_ccs: no <7> [200.413353] i915 device info: has_global_mocs: no <7> [200.413356] i915 device info: has_gmd_id: no <7> [200.413358] i915 device info: has_gt_uc: yes <7> [200.413361] i915 device info: has_heci_pxp: no <7> [200.413364] i915 device info: has_heci_gscfi: no <7> [200.413366] i915 device info: has_guc_deprivilege: no <7> [200.413369] i915 device info: has_l3_ccs_read: no <7> [200.413372] i915 device info: has_l3_dpf: no <7> [200.413374] i915 device info: has_llc: yes <7> [200.413377] i915 device info: has_logical_ring_contexts: yes <7> [200.413380] i915 device info: has_logical_ring_elsq: no <7> [200.413383] i915 device info: has_media_ratio_mode: no <7> [200.413386] i915 device info: has_mslice_steering: no <7> [200.413388] i915 device info: has_oa_bpc_reporting: no <7> [200.413391] i915 device info: has_oa_slice_contrib_limits: no <7> [200.413394] i915 device info: has_oam: no <7> [200.413397] i915 device info: has_one_eu_per_fuse_bit: no <7> [200.413400] i915 device info: has_pxp: no <7> [200.413402] i915 device info: has_rc6: yes <7> [200.413405] i915 device info: has_rc6p: no <7> [200.413408] i915 device info: has_rps: yes <7> [200.413411] i915 device info: has_runtime_pm: yes <7> [200.413414] i915 device info: has_snoop: no <7> [200.413416] i915 device info: has_coherent_ggtt: yes <7> [200.413419] i915 device info: tuning_thread_rr_after_dep: no <7> [200.413422] i915 device info: unfenced_needs_alignment: no <7> [200.413425] i915 device info: hws_needs_physical: no <7> [200.413428] i915 device info: has_pooled_eu: no <7> [200.413430] i915 device info: cursor_needs_physical: no <7> [200.413433] i915 device info: has_cdclk_crawl: no <7> [200.413436] i915 device info: has_cdclk_squash: no <7> [200.413439] i915 device info: has_ddi: yes <7> [200.413442] i915 device info: has_dp_mst: yes <7> [200.413444] i915 device info: has_dsb: no <7> [200.413447] i915 device info: has_fpga_dbg: yes <7> [200.413450] i915 device info: has_gmch: no <7> [200.413453] i915 device info: has_hotplug: yes <7> [200.413455] i915 device info: has_hti: no <7> [200.413458] i915 device info: has_ipc: yes <7> [200.413461] i915 device info: has_overlay: no <7> [200.413464] i915 device info: has_psr: yes <7> [200.413466] i915 device info: has_psr_hw_tracking: yes <7> [200.413469] i915 device info: overlay_needs_physical: no <7> [200.413472] i915 device info: supports_tv: no <7> [200.413475] i915 device info: has_hdcp: yes <7> [200.413478] i915 device info: has_dmc: yes <7> [200.413480] i915 device info: has_dsc: no <7> [200.413483] i915 device info: rawclk rate: 24000 kHz <7> [200.413486] i915 device info: iommu: enabled <7> [200.413489] i915 device info: available engines: 40403 <7> [200.413492] i915 device info: slice total: 1, mask=0001 <7> [200.413496] i915 device info: subslice total: 3 <7> [200.413498] i915 device info: slice0: 3 subslices, mask=00000007 <7> [200.413498] [drm:drm_client_modeset_probe] <7> [200.413502] i915 device info: slice1: 0 subslices, mask=00000000 <7> [200.413506] i915 device info: slice2: 0 subslices, mask=00000000 <7> [200.413509] i915 device info: EU total: 24 <7> [200.413511] i915 device info: EU per subslice: 8 <7> [200.413514] i915 device info: has slice power gating: no <7> [200.413517] i915 device info: has subslice power gating: no <7> [200.413520] i915 device info: has EU power gating: yes <6> [200.413523] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [200.413526] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [200.413529] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [200.413533] i915: Performing live selftests with st_random_seed=0xd01dcf12 st_timeout=500 <6> [200.413537] i915: Running mman <7> [200.413551] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <6> [200.413560] i915: Running i915_gem_mman_live_selftests/igt_partial_tiling <7> [200.413574] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [200.413759] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [200.413777] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [200.413794] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [200.413987] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [200.414005] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [200.414023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [200.414207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [200.414226] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.414231] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.414236] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [200.414240] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [200.414281] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.414294] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.414322] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [200.414342] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [200.513055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [200.513379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [200.513530] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [200.513677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [200.514267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.986323] check_partial_mappings: timed out after tiling=0 stride=0 <7> [201.486926] check_partial_mappings: timed out after tiling=1 stride=262144 <7> [201.987965] check_partial_mappings: timed out after tiling=2 stride=262144 <6> [202.013048] i915: Running i915_gem_mman_live_selftests/igt_smoke_tiling <6> [202.513997] igt_smoke_tiling: Completed 3895 trials <6> [202.627617] i915: Running i915_gem_mman_live_selftests/igt_mmap_offset_exhaustion <7> [202.627808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [202.628045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [202.628572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [202.665027] i915: Running i915_gem_mman_live_selftests/igt_mmap <7> [202.665139] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [202.667832] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [202.669627] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [202.671181] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [202.673695] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [202.760915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [202.761066] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [202.761205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [202.761772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [203.335068] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [203.959932] i915: Running i915_gem_mman_live_selftests/igt_mmap_migrate <6> [203.959948] i915: Running i915_gem_mman_live_selftests/igt_mmap_access <7> [203.960000] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [203.960725] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [203.961283] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [203.961881] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [203.971045] i915: Running i915_gem_mman_live_selftests/igt_mmap_revoke <7> [203.971091] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [203.972139] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [203.984032] i915: Running i915_gem_mman_live_selftests/igt_mmap_gpu <7> [203.984113] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [203.985417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [203.985627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [203.986175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [203.987969] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [204.004046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [204.004260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [204.004407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [204.004553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [204.004698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [204.025083] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [204.064533] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [204.114310] i915: probe of 0000:00:02.0 failed with error -25 <6> [204.314997] [IGT] i915_selftest: finished subtest mman, SUCCESS

<6> [200.123526] [IGT] i915_selftest: starting dynamic subtest mman

<5> [200.231627] Setting dangerous option enable_guc - tainting kernel

<5> [200.231635] Setting dangerous option live_selftests - tainting kernel

<7> [200.276494] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [200.276713] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [200.276875] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [200.276909] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [200.277055] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [200.277263] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [200.277388] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [200.277985] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [200.278104] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [200.278206] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [200.278305] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [200.278310] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [200.279159] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [200.279183] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [200.279343] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [200.279680] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018

<7> [200.279834] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [200.279979] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [200.280106] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [200.280232] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [200.286560] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [200.286709] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [200.286846] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [200.286993] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [200.287130] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [200.287236] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [200.287337] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [200.287435] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [200.287534] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [200.287632] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [200.287750] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [200.287874] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [200.287991] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [200.288081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [200.288641] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [200.288847] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [200.289024] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [200.289167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [200.289326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [200.289527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [200.289727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [200.289942] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [200.290146] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [200.290319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [200.290465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [200.290605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [200.290740] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [200.290892] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [200.291065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [200.291267] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [200.291465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [200.291668] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [200.291844] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.291999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [200.292135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.292271] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [200.292440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [200.292635] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [200.292828] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [200.293049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [200.293268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [200.293425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [200.293563] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [200.294111] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [200.294308] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [200.294523] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [200.294728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.294880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.295015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [200.295161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.295366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [200.295562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [200.295758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [200.295967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [200.296199] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [200.297154] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [200.297466] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [200.297949] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [200.298143] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [200.298333] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [200.298487] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [200.298651] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [200.298837] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [200.299035] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [200.299225] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [200.299411] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [200.299582] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [200.301363] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [200.302871] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [200.303137] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not present

<7> [200.303361] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [200.303560] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [200.303746] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [200.304254] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default)

<7> [200.304394] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [200.304569] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [200.304867] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port D is not present

<7> [200.305088] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] using AUX A (VBT)

<7> [200.305289] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]

<7> [200.305637] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [200.306187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [200.306421] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [200.306597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [200.306798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [200.307009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [200.307210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [200.307409] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [200.307610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [200.307809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [200.308019] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [200.308219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [200.308420] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [200.308590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [200.308766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [200.308979] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [200.309181] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [200.309385] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [200.309588] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [200.309752] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [200.309992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [200.310205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [200.310414] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [200.310604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [200.310794] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [200.310995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [200.311185] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [200.311385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [200.311576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [200.311766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [200.311965] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [200.312165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [200.312357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [200.312546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [200.312736] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [200.312982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [200.313182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [200.313381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [200.313581] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [200.313775] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.313978] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.314168] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.318301] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [200.318492] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [200.318659] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [200.318839] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [200.319046] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [200.320457] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [200.320655] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [200.320850] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [200.324593] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [200.324831] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [200.325067] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [200.365020] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [200.365211] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [200.365351] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [200.365489] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [200.365627] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [200.365765] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004

<7> [200.365914] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [200.366100] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [200.366284] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [200.366469] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [200.366659] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [200.366826] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [200.366980] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [200.367110] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [200.367240] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [200.368457] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [200.368463] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [200.375443] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [200.376112] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [200.376320] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [200.376324] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [200.383815] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [200.384076] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [200.384216] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [200.384352] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [200.384487] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [200.384643] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [200.385163] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [200.385323] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [200.385474] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [200.385628] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [200.388661] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [200.389192] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [200.389684] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1

<7> [200.390558] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<6> [200.390630] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [200.393310] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [200.409085] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [200.410054] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input63

<7> [200.410912] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [200.411689] [drm:drm_client_modeset_probe]

<7> [200.411747] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [200.411687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [200.411771] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [200.411925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [200.412128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [200.412243] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [200.412272] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [200.412291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [200.412308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [200.412330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [200.412494] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [200.412518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [200.412535] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [200.412553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [200.412737] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [200.412761] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [200.412778] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.412784] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.412788] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [200.412792] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [200.412812] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.412824] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.412852] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [200.412883] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [200.413079] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [200.413277] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [200.413282] i915 device info: graphics version: 9

<7> [200.413285] i915 device info: media version: 9

<7> [200.413288] i915 device info: display version: 9

<7> [200.413290] i915 device info: graphics stepping: F0

<7> [200.413293] i915 device info: media stepping: F0

<7> [200.413296] i915 device info: display stepping: C0

<7> [200.413299] i915 device info: base die stepping: **

<7> [200.413302] i915 device info: gt: 2

<7> [200.413305] i915 device info: memory-regions: 0x21

<7> [200.413307] i915 device info: page-sizes: 0x11000

<7> [200.413310] i915 device info: platform: KABYLAKE

<7> [200.413313] i915 device info: ppgtt-size: 48

<7> [200.413316] i915 device info: ppgtt-type: 2

<7> [200.413319] i915 device info: dma_mask_size: 39

<7> [200.413322] i915 device info: is_mobile: no

<7> [200.413324] i915 device info: is_lp: no

<7> [200.413327] i915 device info: require_force_probe: no

<7> [200.413330] i915 device info: is_dgfx: no

<7> [200.413333] i915 device info: has_64bit_reloc: yes

<7> [200.413336] i915 device info: has_64k_pages: no

<7> [200.413339] i915 device info: gpu_reset_clobbers_display: no

<7> [200.413341] i915 device info: has_reset_engine: yes

<7> [200.413344] i915 device info: has_3d_pipeline: yes

<7> [200.413347] i915 device info: has_4tile: no

<7> [200.413350] i915 device info: has_flat_ccs: no

<7> [200.413353] i915 device info: has_global_mocs: no

<7> [200.413356] i915 device info: has_gmd_id: no

<7> [200.413358] i915 device info: has_gt_uc: yes

<7> [200.413361] i915 device info: has_heci_pxp: no

<7> [200.413364] i915 device info: has_heci_gscfi: no

<7> [200.413366] i915 device info: has_guc_deprivilege: no

<7> [200.413369] i915 device info: has_l3_ccs_read: no

<7> [200.413372] i915 device info: has_l3_dpf: no

<7> [200.413374] i915 device info: has_llc: yes

<7> [200.413377] i915 device info: has_logical_ring_contexts: yes

<7> [200.413380] i915 device info: has_logical_ring_elsq: no

<7> [200.413383] i915 device info: has_media_ratio_mode: no

<7> [200.413386] i915 device info: has_mslice_steering: no

<7> [200.413388] i915 device info: has_oa_bpc_reporting: no

<7> [200.413391] i915 device info: has_oa_slice_contrib_limits: no

<7> [200.413394] i915 device info: has_oam: no

<7> [200.413397] i915 device info: has_one_eu_per_fuse_bit: no

<7> [200.413400] i915 device info: has_pxp: no

<7> [200.413402] i915 device info: has_rc6: yes

<7> [200.413405] i915 device info: has_rc6p: no

<7> [200.413408] i915 device info: has_rps: yes

<7> [200.413411] i915 device info: has_runtime_pm: yes

<7> [200.413414] i915 device info: has_snoop: no

<7> [200.413416] i915 device info: has_coherent_ggtt: yes

<7> [200.413419] i915 device info: tuning_thread_rr_after_dep: no

<7> [200.413422] i915 device info: unfenced_needs_alignment: no

<7> [200.413425] i915 device info: hws_needs_physical: no

<7> [200.413428] i915 device info: has_pooled_eu: no

<7> [200.413430] i915 device info: cursor_needs_physical: no

<7> [200.413433] i915 device info: has_cdclk_crawl: no

<7> [200.413436] i915 device info: has_cdclk_squash: no

<7> [200.413439] i915 device info: has_ddi: yes

<7> [200.413442] i915 device info: has_dp_mst: yes

<7> [200.413444] i915 device info: has_dsb: no

<7> [200.413447] i915 device info: has_fpga_dbg: yes

<7> [200.413450] i915 device info: has_gmch: no

<7> [200.413453] i915 device info: has_hotplug: yes

<7> [200.413455] i915 device info: has_hti: no

<7> [200.413458] i915 device info: has_ipc: yes

<7> [200.413461] i915 device info: has_overlay: no

<7> [200.413464] i915 device info: has_psr: yes

<7> [200.413466] i915 device info: has_psr_hw_tracking: yes

<7> [200.413469] i915 device info: overlay_needs_physical: no

<7> [200.413472] i915 device info: supports_tv: no

<7> [200.413475] i915 device info: has_hdcp: yes

<7> [200.413478] i915 device info: has_dmc: yes

<7> [200.413480] i915 device info: has_dsc: no

<7> [200.413483] i915 device info: rawclk rate: 24000 kHz

<7> [200.413486] i915 device info: iommu: enabled

<7> [200.413489] i915 device info: available engines: 40403

<7> [200.413492] i915 device info: slice total: 1, mask=0001

<7> [200.413496] i915 device info: subslice total: 3

<7> [200.413498] i915 device info: slice0: 3 subslices, mask=00000007

<7> [200.413498] [drm:drm_client_modeset_probe]

<7> [200.413502] i915 device info: slice1: 0 subslices, mask=00000000

<7> [200.413506] i915 device info: slice2: 0 subslices, mask=00000000

<7> [200.413509] i915 device info: EU total: 24

<7> [200.413511] i915 device info: EU per subslice: 8

<7> [200.413514] i915 device info: has slice power gating: no

<7> [200.413517] i915 device info: has subslice power gating: no

<7> [200.413520] i915 device info: has EU power gating: yes

<6> [200.413523] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [200.413526] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [200.413529] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [200.413533] i915: Performing live selftests with st_random_seed=0xd01dcf12 st_timeout=500

<7> [200.413551] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<6> [200.413560] i915: Running i915_gem_mman_live_selftests/igt_partial_tiling

<7> [200.413574] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [200.413759] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [200.413777] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [200.413794] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [200.413987] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [200.414005] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [200.414023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [200.414207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [200.414226] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.414231] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.414236] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [200.414240] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [200.414281] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.414294] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.414322] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [200.414342] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [200.513055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [200.513379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [200.513530] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [200.513677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [200.514267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.986323] check_partial_mappings: timed out after tiling=0 stride=0

<7> [201.486926] check_partial_mappings: timed out after tiling=1 stride=262144

<7> [201.987965] check_partial_mappings: timed out after tiling=2 stride=262144

<6> [202.013048] i915: Running i915_gem_mman_live_selftests/igt_smoke_tiling

<6> [202.513997] igt_smoke_tiling: Completed 3895 trials

<6> [202.627617] i915: Running i915_gem_mman_live_selftests/igt_mmap_offset_exhaustion

<7> [202.627808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [202.628045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [202.628572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [202.665027] i915: Running i915_gem_mman_live_selftests/igt_mmap

<7> [202.665139] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [202.667832] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [202.669627] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [202.671181] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [202.673695] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [202.760915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [202.761066] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [202.761205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [202.761772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [203.335068] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [203.959932] i915: Running i915_gem_mman_live_selftests/igt_mmap_migrate

<6> [203.959948] i915: Running i915_gem_mman_live_selftests/igt_mmap_access

<7> [203.960000] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [203.960725] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [203.961283] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [203.961881] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [203.971045] i915: Running i915_gem_mman_live_selftests/igt_mmap_revoke

<7> [203.971091] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [203.972139] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [203.984032] i915: Running i915_gem_mman_live_selftests/igt_mmap_gpu

<7> [203.984113] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [203.985417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [203.985627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [203.986175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [203.987969] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [204.004046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [204.004260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [204.004407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [204.004553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [204.004698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [204.025083] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [204.064533] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [204.114310] i915: probe of 0000:00:02.0 failed with error -25

<6> [204.314997] [IGT] i915_selftest: finished subtest mman, SUCCESS

Results for igt@i915_selftest@live@mman