igt@i915_selftest@live@sanitycheck on fi-kbl-8809g@linus-v6.5-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gfaa966f69 (x86_64) (Linux: 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ x86_64)
Out	Starting subtest: live Starting dynamic subtest: sanitycheck Dynamic subtest sanitycheck: SUCCESS (1.207s)
Err	Starting subtest: live Starting dynamic subtest: sanitycheck Dynamic subtest sanitycheck: SUCCESS (1.207s)
Dmesg	<7> [196.348899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [196.348911] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [196.349120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [196.373831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [196.373838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [196.373979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [196.374425] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] Same epoch counter 1 <7> [196.374476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [196.374656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [196.375132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [196.375296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [196.375322] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-1] <7> [196.375487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [196.426348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <6> [196.427686] [IGT] i915_selftest: executing <7> [196.448788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [196.448795] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [196.448937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [196.478495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [196.478502] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [196.478629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [196.478772] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] Same epoch counter 1 <7> [196.478792] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-2] <7> [196.478916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [196.530321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [196.552292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [196.552299] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [196.552426] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [196.583596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [196.583602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [196.583741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [196.583880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] Same epoch counter 1 <7> [196.583900] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:116:DP-2] <7> [196.584021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [196.584573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [196.584739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:116:DP-2] Same epoch counter 1 <7> [196.584769] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:122:HDMI-A-3] <7> [196.584894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [196.596549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [196.597103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [196.597694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [196.598075] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [196.606120] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [196.606791] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [196.606982] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [196.607112] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [196.607240] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [196.607459] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [196.607602] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [196.607730] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [196.607857] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [196.608291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [196.608680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [196.608836] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [196.608970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [196.637442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [196.659928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [196.659935] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [196.660060] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [196.688992] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [196.688998] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [196.689110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [196.689261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] Same epoch counter 1 <7> [196.875353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [196.875702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [196.876369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [196.877023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [196.877654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [196.877979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [196.878326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [196.878648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [196.917767] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [196.978799] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [197.417742] [IGT] i915_selftest: starting subtest live <6> [197.418170] [IGT] i915_selftest: starting dynamic subtest sanitycheck <5> [197.610295] Setting dangerous option live_selftests - tainting kernel <7> [197.659331] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [197.659609] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [197.659778] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [197.659933] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [197.660219] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [197.660438] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [197.661486] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [197.661693] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [197.661918] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6> [197.662086] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [197.662662] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [197.662674] i915 0000:00:02.0: [drm:init_stolen_smem [i915]] Skip stolen region: failed to setup <7> [197.663160] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7c45b018 <7> [197.663475] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [197.663693] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [197.663952] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [197.664156] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [197.670649] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [197.670871] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [197.671065] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [197.671381] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [197.671601] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [197.671764] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [197.671996] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [197.672164] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [197.672407] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [197.672677] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [197.672867] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [197.673022] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [197.673198] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [197.673403] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [197.674412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [197.674681] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212 <7> [197.674975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [197.675206] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [197.675533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [197.675790] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [197.676010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [197.676365] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [197.676615] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [197.676868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [197.677141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [197.677424] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 22, min size 78) <7> [197.677654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [197.677889] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [197.678155] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [197.678450] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [197.678757] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [197.679030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [197.679277] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [197.679567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [197.679808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [197.680052] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [197.680350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [197.680578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [197.680789] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [197.681061] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [197.681330] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [197.681608] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [197.681872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [197.682162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [197.682560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [197.682793] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [197.683523] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [197.683773] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [197.684003] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [197.684363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [197.684694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [197.684905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [197.685132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [197.685588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [197.685840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [197.686054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [197.686305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [197.686642] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [197.687805] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <6> [197.688066] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [197.688337] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [197.688579] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [197.688737] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [197.688913] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [197.689050] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [197.689259] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [197.689406] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [197.689547] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [197.689687] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [197.689900] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [197.691692] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [197.693491] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [197.693809] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [197.694032] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [197.697016] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [197.697174] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [197.697420] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [197.697609] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [197.697766] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [197.697918] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [197.698088] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [197.698355] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [197.698611] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [197.698759] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [197.698919] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [197.699116] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [197.699461] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [197.699598] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [197.699733] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [197.699903] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [197.700083] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [197.700302] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [197.700749] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [197.700913] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [197.701107] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [197.701395] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [197.701634] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [197.701790] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [197.916258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [197.927258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [197.938260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [197.949259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [197.960257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [197.971257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [197.982260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [197.993257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.004259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.015257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.026260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.037259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.048258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.059257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.070262] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.081261] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.092257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.103257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.114260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.125257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.136260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.147259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.158258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.169257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.180260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.191258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.202258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.213257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.224258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.235259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.246257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.257258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [198.257448] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [198.257475] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [198.257546] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [198.257749] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [198.257959] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [198.258116] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [198.258818] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [198.259001] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [198.259139] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [198.259523] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:111:DDI C/PHY C] using AUX C (platform default) <7> [198.259691] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:111:DDI C/PHY C] <7> [198.259897] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:111:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [198.260214] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:115:DDI D/PHY D] using AUX D (VBT) <7> [198.260503] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:115:DDI D/PHY D] <7> [198.260883] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [198.261047] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:115:DDI D/PHY D] <7> [198.261202] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:115:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [198.261639] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present <7> [198.262170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [198.262423] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [198.262629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [198.262831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [198.263045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [198.263319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [198.263605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [198.263819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [198.264008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [198.264155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [198.264383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [198.264617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [198.264835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [198.265041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [198.265217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [198.265418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [198.265663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DDI C/PHY C] hw state readout: disabled, pipe A <7> [198.265811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DDI D/PHY D] hw state readout: disabled, pipe A <7> [198.265996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST A] hw state readout: disabled, pipe A <7> [198.266203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST B] hw state readout: disabled, pipe B <7> [198.266483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST C] hw state readout: disabled, pipe C <7> [198.266732] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [198.266906] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [198.267057] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [198.267228] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [198.267528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [198.267789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:HDMI-A-1] hw state readout: disabled <7> [198.268008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:112:HDMI-A-2] hw state readout: disabled <7> [198.268198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:DP-2] hw state readout: disabled <7> [198.268395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:122:HDMI-A-3] hw state readout: disabled <7> [198.268558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [198.268701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [198.268844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [198.269063] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [198.269335] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [198.269639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [198.269829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [198.270013] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [198.270166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [198.270372] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [198.270534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [198.270677] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [198.270977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [198.271193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [198.271451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [198.271620] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [198.271784] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [198.271942] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [198.272084] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [198.272336] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [198.272526] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [198.272717] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [198.272917] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [198.274221] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [198.274500] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [198.274645] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [198.289660] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [198.289935] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [198.290076] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [198.290213] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [198.290433] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [198.290677] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [198.291319] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [198.291459] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [198.291568] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [198.291674] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [198.294893] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [198.296201] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [198.296845] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:HDMI-A-1] generating connector hotplug event <7> [198.297505] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:112:HDMI-A-2] generating connector hotplug event <7> [198.298106] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-2 <7> [198.299159] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:DP-2] generating connector hotplug event <7> [198.299784] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:122:HDMI-A-3] generating connector hotplug event <6> [198.299865] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [198.302593] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [198.322410] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [198.325350] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input43 <7> [198.326075] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [198.326791] [drm:drm_client_modeset_probe] <7> [198.326727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [198.326969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [198.327239] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [198.327188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [198.327322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [198.327548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [198.327487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [198.327897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [198.327921] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] <7> [198.327834] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [198.327943] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-1] <7> [198.328059] i915 device info: pciid=0x591b rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [198.328064] i915 device info: graphics version: 9 <7> [198.328066] i915 device info: media version: 9 <7> [198.328068] i915 device info: display version: 9 <7> [198.328071] i915 device info: graphics stepping: F0 <7> [198.328073] i915 device info: media stepping: F0 <7> [198.328075] i915 device info: display stepping: C0 <7> [198.328077] i915 device info: base die stepping: ** <7> [198.328079] i915 device info: gt: 2 <7> [198.328082] i915 device info: memory-regions: 0x21 <7> [198.328084] i915 device info: page-sizes: 0x11000 <7> [198.328087] i915 device info: platform: KABYLAKE <7> [198.328089] i915 device info: ppgtt-size: 48 <7> [198.328091] i915 device info: ppgtt-type: 2 <7> [198.328093] i915 device info: dma_mask_size: 39 <7> [198.328096] i915 device info: is_mobile: no <7> [198.328098] i915 device info: is_lp: no <7> [198.328100] i915 device info: require_force_probe: no <7> [198.328102] i915 device info: is_dgfx: no <7> [198.328105] i915 device info: has_64bit_reloc: yes <7> [198.328107] i915 device info: has_64k_pages: no <7> [198.328109] i915 device info: gpu_reset_clobbers_display: no <7> [198.328111] i915 device info: has_reset_engine: yes <7> [198.328114] i915 device info: has_3d_pipeline: yes <7> [198.328116] i915 device info: has_4tile: no <7> [198.328118] i915 device info: has_flat_ccs: no <7> [198.328120] i915 device info: has_global_mocs: no <7> [198.328122] i915 device info: has_gmd_id: no <7> [198.328125] i915 device info: has_gt_uc: yes <7> [198.328127] i915 device info: has_heci_pxp: no <7> [198.328129] i915 device info: has_heci_gscfi: no <7> [198.328131] i915 device info: has_guc_deprivilege: no <7> [198.328134] i915 device info: has_l3_ccs_read: no <7> [198.328136] i915 device info: has_l3_dpf: no <7> [198.328138] i915 device info: has_llc: yes <7> [198.328140] i915 device info: has_logical_ring_contexts: yes <7> [198.328142] i915 device info: has_logical_ring_elsq: no <7> [198.328145] i915 device info: has_media_ratio_mode: no <7> [198.328147] i915 device info: has_mslice_steering: no <7> [198.328149] i915 device info: has_oa_bpc_reporting: no <7> [198.328152] i915 device info: has_oa_slice_contrib_limits: no <7> [198.328154] i915 device info: has_oam: no <7> [198.328156] i915 device info: has_one_eu_per_fuse_bit: no <7> [198.328158] i915 device info: has_pxp: no <7> [198.328160] i915 device info: has_rc6: yes <7> [198.328162] i915 device info: has_rc6p: no <7> [198.328164] i915 device info: has_rps: yes <7> [198.328165] i915 device info: has_runtime_pm: yes <7> [198.328167] i915 device info: has_snoop: no <7> [198.328169] i915 device info: has_coherent_ggtt: yes <7> [198.328171] i915 device info: tuning_thread_rr_after_dep: no <7> [198.328173] i915 device info: unfenced_needs_alignment: no <7> [198.328175] i915 device info: hws_needs_physical: no <7> [198.328177] i915 device info: has_pooled_eu: no <7> [198.328178] i915 device info: cursor_needs_physical: no <7> [198.328180] i915 device info: has_cdclk_crawl: no <7> [198.328182] i915 device info: has_cdclk_squash: no <7> [198.328184] i915 device info: has_ddi: yes <7> [198.328186] i915 device info: has_dp_mst: yes <7> [198.328188] i915 device info: has_dsb: no <7> [198.328190] i915 device info: has_fpga_dbg: yes <7> [198.328192] i915 device info: has_gmch: no <7> [198.328193] i915 device info: has_hotplug: yes <7> [198.328195] i915 device info: has_hti: no <7> [198.328198] i915 device info: has_ipc: yes <7> [198.328201] i915 device info: has_overlay: no <7> [198.328204] i915 device info: has_psr: yes <7> [198.328197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] status updated from unknown to disconnected <7> [198.328206] i915 device info: has_psr_hw_tracking: yes <7> [198.328209] i915 device info: overlay_needs_physical: no <7> [198.328211] i915 device info: supports_tv: no <7> [198.328217] i915 device info: has_hdcp: yes <7> [198.328220] i915 device info: has_dmc: yes <7> [198.328223] i915 device info: has_dsc: no <7> [198.328226] i915 device info: rawclk rate: 24000 kHz <7> [198.328229] i915 device info: iommu: enabled <7> [198.328232] i915 device info: available engines: 40403 <7> [198.328226] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] disconnected <7> [198.328235] i915 device info: slice total: 1, mask=0001 <7> [198.328238] i915 device info: subslice total: 3 <7> [198.328241] i915 device info: slice0: 3 subslices, mask=00000007 <7> [198.328261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] <7> [198.328281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-2] <7> [198.328491] i915 device info: slice1: 0 subslices, mask=00000000 <7> [198.328495] i915 device info: slice2: 0 subslices, mask=00000000 <7> [198.328489] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] status updated from unknown to disconnected <7> [198.328498] i915 device info: EU total: 24 <7> [198.328500] i915 device info: EU per subslice: 8 <7> [198.328503] i915 device info: has slice power gating: no <7> [198.328505] i915 device info: has subslice power gating: no <7> [198.328510] i915 device info: has EU power gating: yes <6> [198.328513] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [198.328517] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [198.328520] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [198.328515] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] disconnected <6> [198.328524] i915: Performing live selftests with st_random_seed=0x5b233740 st_timeout=500 <6> [198.328527] i915: Running sanitycheck <6> [198.328531] i915: i915_live_sanitycheck() - ok! <7> [198.328531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] <7> [198.328550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:116:DP-2] <7> [198.328547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [198.328769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] status updated from unknown to disconnected <7> [198.328795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] disconnected <7> [198.328815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] <7> [198.328778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [198.328835] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:122:HDMI-A-3] <7> [198.329059] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] status updated from unknown to disconnected <7> [198.329085] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] disconnected <7> [198.329105] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [198.329116] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [198.329120] [drm:drm_client_modeset_probe] connector 106 enabled? no <7> [198.329125] [drm:drm_client_modeset_probe] connector 112 enabled? no <7> [198.329015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [198.329129] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [198.329132] [drm:drm_client_modeset_probe] connector 122 enabled? no <7> [198.329287] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [198.329309] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [198.329241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [198.329347] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [198.329379] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [198.355558] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [198.401480] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [198.433729] i915: probe of 0000:00:02.0 failed with error -25 <6> [198.625285] [IGT] i915_selftest: finished subtest sanitycheck, SUCCESS

<7> [196.348899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [196.348911] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [196.349120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [196.373831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [196.373838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [196.373979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [196.374425] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] Same epoch counter 1

<7> [196.374476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [196.374656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [196.375132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [196.375296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [196.375322] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-1]

<7> [196.375487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [196.426348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<6> [196.427686] [IGT] i915_selftest: executing

<7> [196.448788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [196.448795] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [196.448937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [196.478495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [196.478502] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [196.478629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [196.478772] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] Same epoch counter 1

<7> [196.478792] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-2]

<7> [196.478916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [196.530321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [196.552292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [196.552299] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [196.552426] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [196.583596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [196.583602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [196.583741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [196.583880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] Same epoch counter 1

<7> [196.583900] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:116:DP-2]

<7> [196.584021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [196.584573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [196.584739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:116:DP-2] Same epoch counter 1

<7> [196.584769] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:122:HDMI-A-3]

<7> [196.584894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [196.596549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [196.597103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [196.597694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [196.598075] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [196.606120] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [196.606791] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [196.606982] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [196.607112] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [196.607240] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [196.607459] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [196.607602] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [196.607730] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [196.607857] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [196.608291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [196.608680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [196.608836] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [196.608970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [196.637442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [196.659928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [196.659935] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [196.660060] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [196.688992] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [196.688998] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [196.689110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [196.689261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] Same epoch counter 1

<7> [196.875353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [196.875702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [196.876369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [196.877023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [196.877654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [196.877979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [196.878326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [196.878648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [196.917767] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [196.978799] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [197.417742] [IGT] i915_selftest: starting subtest live

<6> [197.418170] [IGT] i915_selftest: starting dynamic subtest sanitycheck

<5> [197.610295] Setting dangerous option live_selftests - tainting kernel

<7> [197.659331] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [197.659609] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [197.659778] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [197.659933] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [197.660219] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [197.660438] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [197.661486] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [197.661693] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [197.661918] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M

<6> [197.662086] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [197.662662] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [197.662674] i915 0000:00:02.0: [drm:init_stolen_smem [i915]] Skip stolen region: failed to setup

<7> [197.663160] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7c45b018

<7> [197.663475] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [197.663693] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [197.663952] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [197.664156] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [197.670649] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [197.670871] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [197.671065] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [197.671381] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [197.671601] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [197.671764] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [197.671996] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [197.672164] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [197.672407] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [197.672677] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [197.672867] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [197.673022] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [197.673198] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [197.673403] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [197.674412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [197.674681] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212

<7> [197.674975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [197.675206] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [197.675533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [197.675790] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [197.676010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [197.676365] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [197.676615] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [197.676868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [197.677141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [197.677424] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 22, min size 78)

<7> [197.677654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [197.677889] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [197.678155] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [197.678450] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [197.678757] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [197.679030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [197.679277] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [197.679567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [197.679808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [197.680052] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [197.680350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [197.680578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [197.680789] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [197.681061] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [197.681330] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [197.681608] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [197.681872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [197.682162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [197.682560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [197.682793] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [197.683523] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [197.683773] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [197.684003] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [197.684363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [197.684694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [197.684905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [197.685132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [197.685588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [197.685840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [197.686054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [197.686305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [197.686642] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [197.687805] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<6> [197.688066] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [197.688337] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [197.688579] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [197.688737] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [197.688913] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [197.689050] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [197.689259] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [197.689406] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [197.689547] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [197.689687] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [197.689900] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [197.691692] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [197.693491] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [197.693809] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [197.694032] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [197.697016] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [197.697174] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [197.697420] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [197.697609] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [197.697766] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [197.697918] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [197.698088] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [197.698355] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [197.698611] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [197.698759] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [197.698919] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [197.699116] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [197.699461] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [197.699598] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [197.699733] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [197.699903] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [197.700083] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [197.700302] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [197.700749] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [197.700913] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [197.701107] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [197.701395] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [197.701634] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [197.701790] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [197.916258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [197.927258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [197.938260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [197.949259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [197.960257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [197.971257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [197.982260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [197.993257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.004259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.015257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.026260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.037259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.048258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.059257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.070262] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.081261] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.092257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.103257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.114260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.125257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.136260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.147259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.158258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.169257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.180260] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.191258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.202258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.213257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.224258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.235259] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.246257] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.257258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [198.257448] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [198.257475] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [198.257546] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [198.257749] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [198.257959] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [198.258116] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [198.258818] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [198.259001] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [198.259139] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [198.259523] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:111:DDI C/PHY C] using AUX C (platform default)

<7> [198.259691] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:111:DDI C/PHY C]

<7> [198.259897] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:111:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [198.260214] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:115:DDI D/PHY D] using AUX D (VBT)

<7> [198.260503] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:115:DDI D/PHY D]

<7> [198.260883] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [198.261047] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:115:DDI D/PHY D]

<7> [198.261202] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:115:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [198.261639] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present

<7> [198.262170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [198.262423] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [198.262629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [198.262831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [198.263045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [198.263319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [198.263605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [198.263819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [198.264008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [198.264155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [198.264383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [198.264617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [198.264835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [198.265041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [198.265217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [198.265418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [198.265663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [198.265811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [198.265996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST A] hw state readout: disabled, pipe A

<7> [198.266203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST B] hw state readout: disabled, pipe B

<7> [198.266483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST C] hw state readout: disabled, pipe C

<7> [198.266732] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [198.266906] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [198.267057] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [198.267228] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [198.267528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [198.267789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:HDMI-A-1] hw state readout: disabled

<7> [198.268008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:112:HDMI-A-2] hw state readout: disabled

<7> [198.268198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:DP-2] hw state readout: disabled

<7> [198.268395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:122:HDMI-A-3] hw state readout: disabled

<7> [198.268558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [198.268701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [198.268844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [198.269063] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [198.269335] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [198.269639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [198.269829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [198.270013] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [198.270166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [198.270372] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [198.270534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [198.270677] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [198.270977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [198.271193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [198.271451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [198.271620] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [198.271784] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [198.271942] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [198.272084] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [198.272336] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [198.272526] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [198.272717] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [198.272917] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [198.274221] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [198.274500] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [198.274645] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [198.289660] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [198.289935] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [198.290076] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [198.290213] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [198.290433] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [198.290677] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [198.291319] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [198.291459] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [198.291568] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [198.291674] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [198.294893] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [198.296201] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [198.296845] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:HDMI-A-1] generating connector hotplug event

<7> [198.297505] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:112:HDMI-A-2] generating connector hotplug event

<7> [198.298106] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-2

<7> [198.299159] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:DP-2] generating connector hotplug event

<7> [198.299784] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:122:HDMI-A-3] generating connector hotplug event

<6> [198.299865] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [198.302593] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [198.322410] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [198.325350] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input43

<7> [198.326075] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [198.326791] [drm:drm_client_modeset_probe]

<7> [198.326727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [198.326969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [198.327239] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [198.327188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [198.327322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [198.327548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [198.327487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [198.327897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [198.327921] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1]

<7> [198.327834] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [198.327943] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-1]

<7> [198.328059] i915 device info: pciid=0x591b rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [198.328064] i915 device info: graphics version: 9

<7> [198.328066] i915 device info: media version: 9

<7> [198.328068] i915 device info: display version: 9

<7> [198.328071] i915 device info: graphics stepping: F0

<7> [198.328073] i915 device info: media stepping: F0

<7> [198.328075] i915 device info: display stepping: C0

<7> [198.328077] i915 device info: base die stepping: **

<7> [198.328079] i915 device info: gt: 2

<7> [198.328082] i915 device info: memory-regions: 0x21

<7> [198.328084] i915 device info: page-sizes: 0x11000

<7> [198.328087] i915 device info: platform: KABYLAKE

<7> [198.328089] i915 device info: ppgtt-size: 48

<7> [198.328091] i915 device info: ppgtt-type: 2

<7> [198.328093] i915 device info: dma_mask_size: 39

<7> [198.328096] i915 device info: is_mobile: no

<7> [198.328098] i915 device info: is_lp: no

<7> [198.328100] i915 device info: require_force_probe: no

<7> [198.328102] i915 device info: is_dgfx: no

<7> [198.328105] i915 device info: has_64bit_reloc: yes

<7> [198.328107] i915 device info: has_64k_pages: no

<7> [198.328109] i915 device info: gpu_reset_clobbers_display: no

<7> [198.328111] i915 device info: has_reset_engine: yes

<7> [198.328114] i915 device info: has_3d_pipeline: yes

<7> [198.328116] i915 device info: has_4tile: no

<7> [198.328118] i915 device info: has_flat_ccs: no

<7> [198.328120] i915 device info: has_global_mocs: no

<7> [198.328122] i915 device info: has_gmd_id: no

<7> [198.328125] i915 device info: has_gt_uc: yes

<7> [198.328127] i915 device info: has_heci_pxp: no

<7> [198.328129] i915 device info: has_heci_gscfi: no

<7> [198.328131] i915 device info: has_guc_deprivilege: no

<7> [198.328134] i915 device info: has_l3_ccs_read: no

<7> [198.328136] i915 device info: has_l3_dpf: no

<7> [198.328138] i915 device info: has_llc: yes

<7> [198.328140] i915 device info: has_logical_ring_contexts: yes

<7> [198.328142] i915 device info: has_logical_ring_elsq: no

<7> [198.328145] i915 device info: has_media_ratio_mode: no

<7> [198.328147] i915 device info: has_mslice_steering: no

<7> [198.328149] i915 device info: has_oa_bpc_reporting: no

<7> [198.328152] i915 device info: has_oa_slice_contrib_limits: no

<7> [198.328154] i915 device info: has_oam: no

<7> [198.328156] i915 device info: has_one_eu_per_fuse_bit: no

<7> [198.328158] i915 device info: has_pxp: no

<7> [198.328160] i915 device info: has_rc6: yes

<7> [198.328162] i915 device info: has_rc6p: no

<7> [198.328164] i915 device info: has_rps: yes

<7> [198.328165] i915 device info: has_runtime_pm: yes

<7> [198.328167] i915 device info: has_snoop: no

<7> [198.328169] i915 device info: has_coherent_ggtt: yes

<7> [198.328171] i915 device info: tuning_thread_rr_after_dep: no

<7> [198.328173] i915 device info: unfenced_needs_alignment: no

<7> [198.328175] i915 device info: hws_needs_physical: no

<7> [198.328177] i915 device info: has_pooled_eu: no

<7> [198.328178] i915 device info: cursor_needs_physical: no

<7> [198.328180] i915 device info: has_cdclk_crawl: no

<7> [198.328182] i915 device info: has_cdclk_squash: no

<7> [198.328184] i915 device info: has_ddi: yes

<7> [198.328186] i915 device info: has_dp_mst: yes

<7> [198.328188] i915 device info: has_dsb: no

<7> [198.328190] i915 device info: has_fpga_dbg: yes

<7> [198.328192] i915 device info: has_gmch: no

<7> [198.328193] i915 device info: has_hotplug: yes

<7> [198.328195] i915 device info: has_hti: no

<7> [198.328198] i915 device info: has_ipc: yes

<7> [198.328201] i915 device info: has_overlay: no

<7> [198.328204] i915 device info: has_psr: yes

<7> [198.328197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] status updated from unknown to disconnected

<7> [198.328206] i915 device info: has_psr_hw_tracking: yes

<7> [198.328209] i915 device info: overlay_needs_physical: no

<7> [198.328211] i915 device info: supports_tv: no

<7> [198.328217] i915 device info: has_hdcp: yes

<7> [198.328220] i915 device info: has_dmc: yes

<7> [198.328223] i915 device info: has_dsc: no

<7> [198.328226] i915 device info: rawclk rate: 24000 kHz

<7> [198.328229] i915 device info: iommu: enabled

<7> [198.328232] i915 device info: available engines: 40403

<7> [198.328226] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] disconnected

<7> [198.328235] i915 device info: slice total: 1, mask=0001

<7> [198.328238] i915 device info: subslice total: 3

<7> [198.328241] i915 device info: slice0: 3 subslices, mask=00000007

<7> [198.328261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2]

<7> [198.328281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-2]

<7> [198.328491] i915 device info: slice1: 0 subslices, mask=00000000

<7> [198.328495] i915 device info: slice2: 0 subslices, mask=00000000

<7> [198.328489] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] status updated from unknown to disconnected

<7> [198.328498] i915 device info: EU total: 24

<7> [198.328500] i915 device info: EU per subslice: 8

<7> [198.328503] i915 device info: has slice power gating: no

<7> [198.328505] i915 device info: has subslice power gating: no

<7> [198.328510] i915 device info: has EU power gating: yes

<6> [198.328513] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [198.328517] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [198.328520] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [198.328515] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] disconnected

<6> [198.328524] i915: Performing live selftests with st_random_seed=0x5b233740 st_timeout=500

<6> [198.328527] i915: Running sanitycheck

<6> [198.328531] i915: i915_live_sanitycheck() - ok!

<7> [198.328531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2]

<7> [198.328550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:116:DP-2]

<7> [198.328547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [198.328769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] status updated from unknown to disconnected

<7> [198.328795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] disconnected

<7> [198.328815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3]

<7> [198.328778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [198.328835] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:122:HDMI-A-3]

<7> [198.329059] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] status updated from unknown to disconnected

<7> [198.329085] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] disconnected

<7> [198.329105] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [198.329116] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [198.329120] [drm:drm_client_modeset_probe] connector 106 enabled? no

<7> [198.329125] [drm:drm_client_modeset_probe] connector 112 enabled? no

<7> [198.329015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [198.329129] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [198.329132] [drm:drm_client_modeset_probe] connector 122 enabled? no

<7> [198.329287] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [198.329309] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [198.329241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [198.329347] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [198.329379] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [198.355558] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [198.401480] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [198.433729] i915: probe of 0000:00:02.0 failed with error -25

<6> [198.625285] [IGT] i915_selftest: finished subtest sanitycheck, SUCCESS

Results for igt@i915_selftest@live@sanitycheck