igt@core_hotunplug@unbind-rebind on bat-rpls-2@linus-v6.5-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gfaa966f69 (x86_64) (Linux: 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: unbind-rebind Opened device: /dev/dri/renderD128 Unloaded audio driver snd_hda_intel Realoading snd_hda_intel Subtest unbind-rebind: SUCCESS (1.641s)
Err	Starting subtest: unbind-rebind Subtest unbind-rebind: SUCCESS (1.641s)
Dmesg	<6> [99.358864] Console: switching to colour dummy device 80x25 <6> [99.359088] [IGT] core_hotunplug: executing <7> [99.371133] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [99.371497] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [99.371609] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [99.372605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.375460] [IGT] core_hotunplug: closing selected device instance <7> [99.375696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.376382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.376505] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.376627] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [99.376750] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.376859] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [99.376964] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.377070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [99.377174] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.377279] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [99.377381] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.377483] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [99.377584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.377688] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.377781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6> [99.379257] [IGT] core_hotunplug: starting subtest unbind-rebind <7> [99.386584] [IGT] core_hotunplug: reopening DRM device for health check <7> [99.386609] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [99.386994] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [99.393448] [IGT] core_hotunplug: running device sysfs healthcheck <7> [99.393648] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [99.393922] [IGT] core_hotunplug: closing health checked device instance <7> [99.394242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.395843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.396593] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.396720] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [99.396834] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.396940] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [99.397045] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.397150] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [99.397259] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.397366] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [99.397470] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.397573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [99.397684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.397785] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.397876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.400525] [IGT] core_hotunplug: reopening render device for health check <7> [99.400555] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [99.400912] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [99.407212] [IGT] core_hotunplug: running device sysfs healthcheck <7> [99.407455] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [99.407748] [IGT] core_hotunplug: closing health checked device instance <7> [99.407962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.409122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.410346] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.410463] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [99.410574] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.410690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [99.410796] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.410901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [99.411004] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.411111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [99.411214] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.411323] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [99.411426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.411524] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.411619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.498924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.499659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.500881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.500999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [99.501108] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.501214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [99.501318] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.501422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [99.501526] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.501642] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [99.501750] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.501856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [99.501947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.502041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [99.502199] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [99.515327] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [99.515463] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [99.515562] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [99.515672] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [99.515764] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [99.515856] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [99.515948] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [99.516038] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [99.516128] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [99.516219] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [99.516309] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [99.516401] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [99.516495] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [99.516588] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [99.516688] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [99.516779] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [99.516870] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [99.516959] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [99.517051] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [99.517144] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [99.517235] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [99.517326] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [99.517415] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [99.517504] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [99.517593] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [99.517690] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [99.517783] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [99.517875] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [99.517967] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [99.518058] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [99.518147] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [99.518237] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [99.518325] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [99.518415] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [99.518504] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [99.518594] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [99.519219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [99.519398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.519503] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0) <7> [99.519597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.519706] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.519800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.590747] [IGT] core_hotunplug: unbinding the driver from the device <7> [99.590980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.592166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.593387] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.593816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [99.594199] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.594577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [99.595014] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.595389] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [99.595802] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.596192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [99.596565] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.596968] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [99.597316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.597694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [99.598185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [99.598545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5 <7> [99.622121] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [99.691728] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [99.692183] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [99.782323] [IGT] core_hotunplug: rebinding the driver to the device <7> [99.783690] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7> [99.783882] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7> [99.784095] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH <7> [99.784248] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [99.784464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz <7> [99.784574] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7> [99.784703] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <7> [99.785438] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [99.785546] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [99.785668] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [99.785772] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [99.785806] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [99.786166] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [99.786183] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000022200087 <7> [99.786320] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [99.786800] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x15a0a018 <7> [99.786961] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [99.787090] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [99.787209] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [99.787322] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [99.787445] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [99.787560] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4 <7> [99.787665] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [99.787770] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=4801 tRP=39 tRDPRE=17 tRAS=76 tRCD=39 tRC=115 <7> [99.787925] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32 <7> [99.788045] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=48 <7> [99.788165] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=64 <7> [99.788278] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=15471 peakbw: 76816 <7> [99.788394] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133 <7> [99.788509] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=51200 <7> [99.788629] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=68267 <7> [99.788741] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21375 peakbw: 76816 <7> [99.788853] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133 <7> [99.788963] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=51200 <7> [99.789065] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=68267 <7> [99.789166] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=26415 peakbw: 76816 <7> [99.789268] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133 <7> [99.789366] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=51200 <7> [99.789466] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=68267 <7> [99.789568] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29946 peakbw: 76816 <7> [99.789679] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133 <7> [99.789780] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=51200 <7> [99.789879] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=68267 <7> [99.789975] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=32092 peakbw: 76816 <7> [99.790065] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133 <7> [99.790158] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=51200 <7> [99.790253] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=68267 <7> [99.790343] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=33283 peakbw: 76816 <7> [99.790433] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133 <7> [99.790522] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=51200 <7> [99.790611] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=68267 <7> [99.791045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [99.791162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 250 <7> [99.791265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7> [99.791363] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5) <7> [99.791457] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [99.791551] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [99.791670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 812, min size 812) <7> [99.791758] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7> [99.791843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [99.791936] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [99.792029] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7> [99.792119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7> [99.792207] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7> [99.792295] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [99.792381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [99.792467] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [99.792550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [99.792642] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [99.792730] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [99.792817] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [99.792902] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [99.792988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [99.793074] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [99.793159] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same DDC pin (0xa) as port A, disabling port A DVI/HDMI support <7> [99.793247] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [99.793336] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [99.793422] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [99.793508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7> [99.793592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI max TMDS clock: 297000 kHz <7> [99.793686] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [99.793770] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [99.793854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [99.793938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7> [99.794020] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [99.794104] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7> [99.794188] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7> [99.794282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [99.794432] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.794536] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [99.794641] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.794740] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [99.794839] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.794937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [99.795035] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.795135] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [99.795232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.795329] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [99.795416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [99.795513] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [99.795609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [99.795813] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [99.795908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.795991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.796075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [99.796185] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.796287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [99.796385] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.796483] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [99.796581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.796709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [99.796809] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.796915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [99.797016] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [99.797115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [99.797200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.797287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [99.797376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [99.797462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5 <7> [99.797632] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adls_dmc_ver2_01.bin <7> [99.798443] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [99.799036] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 20 us <7> [99.799141] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec) <7> [99.799246] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 22 (22.0 usec) <7> [99.799367] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 33 (33.0 usec) <7> [99.799486] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 33 (33.0 usec) <7> [99.799583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec) <7> [99.799715] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 48 (48.0 usec) <7> [99.799826] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 101 (101.0 usec) <7> [99.799922] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 147 (147.0 usec) <6> [99.800991] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1) <7> [99.801485] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 2 display pipes available. <7> [99.802328] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [99.802438] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [99.802527] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <7> [99.802590] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7> [99.802700] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7> [99.802813] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT) <7> [99.802899] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A] <7> [99.802991] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [99.803084] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [99.803174] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [99.803266] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [99.803354] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [99.803441] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [99.803528] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [99.803621] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [99.803717] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [99.803815] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0 <7> [99.803955] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [99.804033] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [99.804104] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [99.804173] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [99.804241] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [99.804388] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [99.804534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [99.804775] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on <7> [99.804873] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [99.804998] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [99.805085] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [99.805208] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [99.805293] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [100.037622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.066621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.095621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.123621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.152621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.181622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.210622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.239622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.268621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.297621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.326621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.355621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.384621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.413621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.442621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.471621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.500621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.529621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.558621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.587621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.616621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.645621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.674621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.703629] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.732621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.761621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.790622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.819621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.848621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.877621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.906622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.935621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [100.935712] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [100.935725] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [100.935752] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off <7> [100.935880] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [100.935954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [100.936119] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI TC1/PHY B] using AUX D (VBT) <7> [100.936197] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI TC1/PHY B] <7> [100.936432] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI TC1/PHY B] <7> [100.936505] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI TC1/PHY B] Using DDC pin 0x9 (VBT) <7> [100.936644] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:150:DDI TC2/PHY C] using AUX E (VBT) <7> [100.936723] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:150:DDI TC2/PHY C] <7> [100.936881] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:150:DDI TC2/PHY C] <7> [100.936950] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:150:DDI TC2/PHY C] Using DDC pin 0xa (VBT) <7> [100.937057] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:160:DDI TC3/PHY D] using AUX F (VBT) <7> [100.937132] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:160:DDI TC3/PHY D] <7> [100.937285] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:160:DDI TC3/PHY D] <7> [100.937354] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:160:DDI TC3/PHY D] Using DDC pin 0xb (VBT) <7> [100.937459] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:170:DDI TC4/PHY E] using AUX G (VBT) <7> [100.937532] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:170:DDI TC4/PHY E] <7> [100.937689] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:170:DDI TC4/PHY E] <7> [100.937756] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:170:DDI TC4/PHY E] Using DDC pin 0xc (VBT) <7> [100.938095] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled <7> [100.938216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7> [100.938303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [100.938386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7> [100.938467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7> [100.938548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7> [100.938638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7> [100.938721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7> [100.938803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7> [100.938881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7> [100.938962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7> [100.939042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7> [100.939121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7> [100.939198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7> [100.939276] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI TC1/PHY B] hw state readout: disabled, pipe A <7> [100.939350] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A <7> [100.939422] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B <7> [100.939498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DDI TC2/PHY C] hw state readout: disabled, pipe A <7> [100.939573] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:152:DP-MST A] hw state readout: disabled, pipe A <7> [100.939657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:153:DP-MST B] hw state readout: disabled, pipe B <7> [100.939739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:160:DDI TC3/PHY D] hw state readout: disabled, pipe A <7> [100.939814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:162:DP-MST A] hw state readout: disabled, pipe A <7> [100.939888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:163:DP-MST B] hw state readout: disabled, pipe B <7> [100.939964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:170:DDI TC4/PHY E] hw state readout: disabled, pipe A <7> [100.940037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:172:DP-MST A] hw state readout: disabled, pipe A <7> [100.940109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:173:DP-MST B] hw state readout: disabled, pipe B <7> [100.940189] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [100.940275] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [100.940358] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [100.940440] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [100.940561] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-1] hw state readout: disabled <7> [100.940662] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:145:HDMI-A-1] hw state readout: disabled <7> [100.940751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:151:DP-2] hw state readout: disabled <7> [100.940834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:157:HDMI-A-2] hw state readout: disabled <7> [100.940917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:161:DP-3] hw state readout: disabled <7> [100.940997] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:167:HDMI-A-3] hw state readout: disabled <7> [100.941082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:171:DP-4] hw state readout: disabled <7> [100.941166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:177:HDMI-A-4] hw state readout: disabled <7> [100.941241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [100.941316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7> [100.941391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7> [100.941464] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7> [100.941537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7> [100.941619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7> [100.941698] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [100.941786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7> [100.941860] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7> [100.941934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7> [100.942008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7> [100.942081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7> [100.942158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7> [100.942234] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [100.942370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state] <7> [100.942454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7> [100.942538] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [100.942612] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [100.947413] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K) <7> [100.947515] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [100.947581] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [100.947663] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [100.947671] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7> [100.948158] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 10 engine workarounds on rcs'0 <7> [100.948246] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [100.948326] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7> [100.948853] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7> [100.948940] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0 <7> [100.949021] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0 <7> [100.949257] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7> [100.949336] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0 <7> [100.949640] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7> [100.949720] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2 <7> [100.949939] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7> [100.950021] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0 <7> [100.950821] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [100.950932] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 4 ext-regs. <7> [100.951045] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset <7> [100.964176] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f <7> [100.964273] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000 <7> [100.964365] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7> [100.964454] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [100.964540] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8 <7> [100.964632] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0xa7800004 <7> [100.964717] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [100.964802] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [100.964886] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [100.964970] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [100.965054] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [100.965139] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [100.965223] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [100.965307] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [100.965391] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [100.966106] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.5.1 <6> [100.966108] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 <7> [100.967973] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [100.968284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [100.969236] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads <6> [100.970571] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [100.970573] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6> [100.971241] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7> [100.974500] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping <7> [100.974598] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7> [100.974696] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [100.974797] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [100.975177] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [100.975243] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [100.975305] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [100.975365] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7> [100.975424] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [100.978542] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY B bus for card0-DP-1 <7> [100.978971] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-1] generating connector hotplug event <7> [100.979157] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:145:HDMI-A-1] generating connector hotplug event <7> [100.979334] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY C bus for card0-DP-2 <7> [100.979718] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:151:DP-2] generating connector hotplug event <7> [100.979888] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:157:HDMI-A-2] generating connector hotplug event <7> [100.980058] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY D bus for card0-DP-3 <7> [100.980347] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:161:DP-3] generating connector hotplug event <7> [100.980509] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:167:HDMI-A-3] generating connector hotplug event <7> [100.980718] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY E bus for card0-DP-4 <7> [100.981005] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:171:DP-4] generating connector hotplug event <7> [100.981166] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:177:HDMI-A-4] generating connector hotplug event <6> [100.981188] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [100.982269] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 8 outputs detected <6> [100.990814] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [100.992798] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 <7> [100.993354] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [100.993788] [drm:drm_client_modeset_probe] <7> [100.993786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5 <7> [100.993830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] <7> [100.993849] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1] <7> [100.993901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [100.994055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [100.994220] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [100.994207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.994312] i915 device info: pciid=0xa780 rev=0x04 platform=ALDERLAKE_S (subplatform=0x1) gen=12 <7> [100.994314] i915 device info: graphics version: 12 <7> [100.994315] i915 device info: media version: 12 <7> [100.994316] i915 device info: display version: 12 <7> [100.994317] i915 device info: graphics stepping: D0 <7> [100.994318] i915 device info: media stepping: D0 <7> [100.994319] i915 device info: display stepping: D0 <7> [100.994319] i915 device info: base die stepping: ** <7> [100.994320] i915 device info: gt: 0 <7> [100.994321] i915 device info: memory-regions: 0x21 <7> [100.994322] i915 device info: page-sizes: 0x211000 <7> [100.994323] i915 device info: platform: ALDERLAKE_S <7> [100.994324] i915 device info: ppgtt-size: 48 <7> [100.994325] i915 device info: ppgtt-type: 2 <7> [100.994325] i915 device info: dma_mask_size: 39 <7> [100.994326] i915 device info: is_mobile: no <7> [100.994327] i915 device info: is_lp: no <7> [100.994328] i915 device info: require_force_probe: no <7> [100.994329] i915 device info: is_dgfx: no <7> [100.994330] i915 device info: has_64bit_reloc: yes <7> [100.994330] i915 device info: has_64k_pages: no <7> [100.994331] i915 device info: gpu_reset_clobbers_display: no <7> [100.994332] i915 device info: has_reset_engine: yes <7> [100.994333] i915 device info: has_3d_pipeline: yes <7> [100.994334] i915 device info: has_4tile: no <7> [100.994334] i915 device info: has_flat_ccs: no <7> [100.994341] i915 device info: has_global_mocs: yes <7> [100.994342] i915 device info: has_gmd_id: no <7> [100.994343] i915 device info: has_gt_uc: yes <7> [100.994344] i915 device info: has_heci_pxp: no <7> [100.994344] i915 device info: has_heci_gscfi: no <7> [100.994345] i915 device info: has_guc_deprivilege: no <7> [100.994346] i915 device info: has_l3_ccs_read: no <7> [100.994347] i915 device info: has_l3_dpf: no <7> [100.994348] i915 device info: has_llc: yes <7> [100.994349] i915 device info: has_logical_ring_contexts: yes <7> [100.994350] i915 device info: has_logical_ring_elsq: yes <7> [100.994351] i915 device info: has_media_ratio_mode: no <7> [100.994352] i915 device info: has_mslice_steering: no <7> [100.994353] i915 device info: has_oa_bpc_reporting: no <7> [100.994354] i915 device info: has_oa_slice_contrib_limits: no <7> [100.994355] i915 device info: has_oam: no <7> [100.994356] i915 device info: has_one_eu_per_fuse_bit: no <7> [100.994357] i915 device info: has_pxp: yes <7> [100.994358] i915 device info: has_rc6: yes <7> [100.994359] i915 device info: has_rc6p: no <7> [100.994360] i915 device info: has_rps: yes <7> [100.994361] i915 device info: has_runtime_pm: yes <7> [100.994362] i915 device info: has_snoop: no <7> [100.994363] i915 device info: has_coherent_ggtt: no <7> [100.994364] i915 device info: tuning_thread_rr_after_dep: no <7> [100.994365] i915 device info: unfenced_needs_alignment: no <7> [100.994366] i915 device info: hws_needs_physical: no <7> [100.994367] i915 device info: has_pooled_eu: no <7> [100.994368] i915 device info: cursor_needs_physical: no <7> [100.994369] i915 device info: has_cdclk_crawl: no <7> [100.994370] i915 device info: has_cdclk_squash: no <7> [100.994371] i915 device info: has_ddi: yes <7> [100.994372] i915 device info: has_dp_mst: yes <7> [100.994373] i915 device info: has_dsb: yes <7> [100.994374] i915 device info: has_fpga_dbg: yes <7> [100.994375] i915 device info: has_gmch: no <7> [100.994376] i915 device info: has_hotplug: yes <7> [100.994377] i915 device info: has_hti: yes <7> [100.994378] i915 device info: has_ipc: yes <7> [100.994379] i915 device info: has_overlay: no <7> [100.994380] i915 device info: has_psr: yes <7> [100.994381] i915 device info: has_psr_hw_tracking: no <7> [100.994382] i915 device info: overlay_needs_physical: no <7> [100.994383] i915 device info: supports_tv: no <7> [100.994384] i915 device info: has_hdcp: yes <7> [100.994385] i915 device info: has_dmc: yes <7> [100.994386] i915 device info: has_dsc: yes <7> [100.994387] i915 device info: rawclk rate: 19200 kHz <7> [100.994388] i915 device info: iommu: enabled <7> [100.994389] i915 device info: available engines: 41403 <7> [100.994391] i915 device info: slice total: 1, mask=0001 <7> [100.994392] i915 device info: subslice total: 2 <7> [100.994393] i915 device info: slice0: 2 subslices, mask=00000003 <7> [100.994394] i915 device info: EU total: 32 <7> [100.994395] i915 device info: EU per subslice: 16 <7> [100.994396] i915 device info: has slice power gating: yes <7> [100.994398] i915 device info: has subslice power gating: no <7> [100.994399] i915 device info: has EU power gating: no <6> [100.994400] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [100.994401] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [100.994402] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [100.994346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.994476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.995717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.996911] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0) <7> [100.997050] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] status updated from unknown to disconnected <7> [100.997146] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected <7> [100.997165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] <7> [100.997179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1] <7> [100.998177] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] status updated from unknown to disconnected <7> [100.998192] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected <7> [100.998202] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] <7> [100.998210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2] <7> [100.999334] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] status updated from unknown to disconnected <7> [100.999347] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected <7> [100.999357] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] <7> [100.999368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2] <7> [101.000524] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] status updated from unknown to disconnected <7> [101.000536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected <7> [101.000545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] <7> [101.000554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3] <6> [101.001090] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7> [101.001693] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] status updated from unknown to disconnected <7> [101.001702] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected <7> [101.001709] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] <7> [101.001717] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3] <7> [101.002893] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] status updated from unknown to disconnected <7> [101.002902] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected <7> [101.002910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] <7> [101.002917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4] <7> [101.004211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] status updated from unknown to disconnected <7> [101.004221] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected <7> [101.004229] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] <7> [101.004236] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4] <7> [101.005276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] status updated from unknown to disconnected <7> [101.005287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected <7> [101.005295] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [101.005299] [drm:drm_client_modeset_probe] connector 134 enabled? no <7> [101.005300] [drm:drm_client_modeset_probe] connector 145 enabled? no <7> [101.005302] [drm:drm_client_modeset_probe] connector 151 enabled? no <7> [101.005303] [drm:drm_client_modeset_probe] connector 157 enabled? no <7> [101.005304] [drm:drm_client_modeset_probe] connector 161 enabled? no <7> [101.005306] [drm:drm_client_modeset_probe] connector 167 enabled? no <7> [101.005307] [drm:drm_client_modeset_probe] connector 171 enabled? no <7> [101.005308] [drm:drm_client_modeset_probe] connector 177 enabled? no <7> [101.005326] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [101.005331] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [101.005341] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [101.005352] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [101.005638] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [101.005732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.006444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.006563] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [101.006681] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [101.006786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [101.006888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [101.006987] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [101.007085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [101.007182] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [101.007282] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [101.007378] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [101.007478] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [101.007566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.007673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [101.007825] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [101.007959] [drm:drm_client_modeset_probe] <7> [101.008003] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] <7> [101.008020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1] <7> [101.008187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected <7> [101.008201] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] <7> [101.008214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1] <7> [101.008440] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected <7> [101.008452] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] <7> [101.008465] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2] <7> [101.008625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected <7> [101.008637] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] <7> [101.008649] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2] <7> [101.008797] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected <7> [101.008809] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] <7> [101.008821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3] <7> [101.008963] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected <7> [101.008975] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] <7> [101.008986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3] <7> [101.009135] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected <7> [101.009148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] <7> [101.009160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4] <7> [101.009291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected <7> [101.009303] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] <7> [101.009315] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4] <7> [101.009462] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected <7> [101.009473] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [101.009477] [drm:drm_client_modeset_probe] connector 134 enabled? no <7> [101.009480] [drm:drm_client_modeset_probe] connector 145 enabled? no <7> [101.009482] [drm:drm_client_modeset_probe] connector 151 enabled? no <7> [101.009485] [drm:drm_client_modeset_probe] connector 157 enabled? no <7> [101.009487] [drm:drm_client_modeset_probe] connector 161 enabled? no <7> [101.009489] [drm:drm_client_modeset_probe] connector 167 enabled? no <7> [101.009492] [drm:drm_client_modeset_probe] connector 171 enabled? no <7> [101.009494] [drm:drm_client_modeset_probe] connector 177 enabled? no <7> [101.009517] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [101.009525] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [101.009541] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [101.009556] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [101.009605] [drm:drm_client_modeset_probe] <7> [101.009647] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] <7> [101.009660] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1] <7> [101.009808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected <7> [101.009823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] <7> [101.009835] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1] <7> [101.009982] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected <7> [101.009994] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] <7> [101.010006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2] <7> [101.010147] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected <7> [101.010158] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] <7> [101.010170] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2] <7> [101.010311] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected <7> [101.010323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] <7> [101.010334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3] <7> [101.010474] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected <7> [101.010486] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] <7> [101.010497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3] <7> [101.010710] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected <7> [101.010723] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] <7> [101.010735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4] <7> [101.010887] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected <7> [101.010899] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] <7> [101.010911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4] <7> [101.011058] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected <7> [101.011069] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [101.011072] [drm:drm_client_modeset_probe] connector 134 enabled? no <7> [101.011075] [drm:drm_client_modeset_probe] connector 145 enabled? no <7> [101.011078] [drm:drm_client_modeset_probe] connector 151 enabled? no <7> [101.011080] [drm:drm_client_modeset_probe] connector 157 enabled? no <7> [101.011082] [drm:drm_client_modeset_probe] connector 161 enabled? no <7> [101.011084] [drm:drm_client_modeset_probe] connector 167 enabled? no <7> [101.011086] [drm:drm_client_modeset_probe] connector 171 enabled? no <7> [101.011089] [drm:drm_client_modeset_probe] connector 177 enabled? no <7> [101.011113] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [101.011120] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [101.011136] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [101.011152] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [101.014907] [IGT] core_hotunplug: reopening DRM device for health check <7> [101.014936] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [101.015313] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [101.017389] [IGT] core_hotunplug: running device sysfs healthcheck <7> [101.017589] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [101.017917] [IGT] core_hotunplug: closing health checked device instance <7> [101.018090] [IGT] core_hotunplug: reopening render device for health check <7> [101.018110] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [101.018474] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [101.020143] [IGT] core_hotunplug: running device sysfs healthcheck <7> [101.020388] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [101.020704] [IGT] core_hotunplug: closing health checked device instance <6> [101.020876] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS <6> [101.021318] [IGT] core_hotunplug: exiting, ret=0 <6> [101.028721] snd_hda_codec_realtek hdaudioC0D0: ALC711: SKU not ready 0x00000000 <6> [101.029242] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC711: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp <6> [101.029245] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [101.029246] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [101.029248] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 <6> [101.029249] snd_hda_codec_realtek hdaudioC0D0: inputs: <6> [101.029250] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13 <6> [101.029251] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 <6> [101.029253] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12

<6> [99.358864] Console: switching to colour dummy device 80x25

<6> [99.359088] [IGT] core_hotunplug: executing

<7> [99.371133] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [99.371497] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [99.371609] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [99.372605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [99.375460] [IGT] core_hotunplug: closing selected device instance

<7> [99.375696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [99.376382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [99.376505] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.376627] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [99.376750] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.376859] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [99.376964] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.377070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [99.377174] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.377279] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [99.377381] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.377483] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [99.377584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [99.377688] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [99.377781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<6> [99.379257] [IGT] core_hotunplug: starting subtest unbind-rebind

<7> [99.386584] [IGT] core_hotunplug: reopening DRM device for health check

<7> [99.386609] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [99.386994] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [99.393448] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [99.393648] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [99.393922] [IGT] core_hotunplug: closing health checked device instance

<7> [99.394242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [99.395843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [99.396593] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.396720] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [99.396834] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.396940] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [99.397045] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.397150] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [99.397259] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.397366] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [99.397470] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.397573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [99.397684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [99.397785] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [99.397876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [99.400525] [IGT] core_hotunplug: reopening render device for health check

<7> [99.400555] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [99.400912] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [99.407212] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [99.407455] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [99.407748] [IGT] core_hotunplug: closing health checked device instance

<7> [99.407962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [99.409122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [99.410346] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.410463] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [99.410574] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.410690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [99.410796] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.410901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [99.411004] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.411111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [99.411214] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.411323] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [99.411426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [99.411524] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [99.411619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [99.498924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [99.499659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [99.500881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.500999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [99.501108] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.501214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [99.501318] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.501422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [99.501526] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.501642] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [99.501750] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.501856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [99.501947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [99.502041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [99.502199] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [99.515327] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [99.515463] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [99.515562] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [99.515672] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [99.515764] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [99.515856] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [99.515948] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [99.516038] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [99.516128] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [99.516219] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [99.516309] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [99.516401] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [99.516495] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [99.516588] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [99.516688] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [99.516779] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [99.516870] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [99.516959] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [99.517051] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [99.517144] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [99.517235] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [99.517326] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [99.517415] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [99.517504] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [99.517593] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [99.517690] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [99.517783] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [99.517875] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [99.517967] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [99.518058] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [99.518147] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [99.518237] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [99.518325] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [99.518415] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [99.518504] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [99.518594] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [99.519219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [99.519398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [99.519503] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)

<7> [99.519597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [99.519706] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [99.519800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [99.590747] [IGT] core_hotunplug: unbinding the driver from the device

<7> [99.590980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [99.592166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [99.593387] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.593816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [99.594199] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.594577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [99.595014] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.595389] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [99.595802] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.596192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [99.596565] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.596968] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [99.597316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [99.597694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [99.598185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [99.598545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5

<7> [99.622121] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [99.691728] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [99.692183] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [99.782323] [IGT] core_hotunplug: rebinding the driver to the device

<7> [99.783690] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K

<7> [99.783882] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)

<7> [99.784095] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH

<7> [99.784248] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [99.784464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz

<7> [99.784574] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005

<7> [99.784703] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001

<7> [99.785438] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [99.785546] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [99.785668] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [99.785772] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [99.785806] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [99.786166] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [99.786183] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000022200087

<7> [99.786320] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [99.786800] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x15a0a018

<7> [99.786961] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [99.787090] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [99.787209] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [99.787322] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [99.787445] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [99.787560] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4

<7> [99.787665] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [99.787770] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=4801 tRP=39 tRDPRE=17 tRAS=76 tRCD=39 tRC=115

<7> [99.787925] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32

<7> [99.788045] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=48

<7> [99.788165] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=64

<7> [99.788278] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=15471 peakbw: 76816

<7> [99.788394] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133

<7> [99.788509] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=51200

<7> [99.788629] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=68267

<7> [99.788741] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21375 peakbw: 76816

<7> [99.788853] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133

<7> [99.788963] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=51200

<7> [99.789065] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=68267

<7> [99.789166] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=26415 peakbw: 76816

<7> [99.789268] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133

<7> [99.789366] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=51200

<7> [99.789466] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=68267

<7> [99.789568] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29946 peakbw: 76816

<7> [99.789679] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133

<7> [99.789780] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=51200

<7> [99.789879] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=68267

<7> [99.789975] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=32092 peakbw: 76816

<7> [99.790065] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133

<7> [99.790158] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=51200

<7> [99.790253] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=68267

<7> [99.790343] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=33283 peakbw: 76816

<7> [99.790433] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133

<7> [99.790522] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=51200

<7> [99.790611] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=68267

<7> [99.791045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [99.791162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 250

<7> [99.791265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)

<7> [99.791363] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)

<7> [99.791457] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [99.791551] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [99.791670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 812, min size 812)

<7> [99.791758] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)

<7> [99.791843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [99.791936] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [99.792029] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)

<7> [99.792119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)

<7> [99.792207] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78)

<7> [99.792295] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [99.792381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [99.792467] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [99.792550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [99.792642] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [99.792730] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [99.792817] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [99.792902] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [99.792988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [99.793074] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [99.793159] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same DDC pin (0xa) as port A, disabling port A DVI/HDMI support

<7> [99.793247] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [99.793336] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [99.793422] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [99.793508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0

<7> [99.793592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI max TMDS clock: 297000 kHz

<7> [99.793686] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [99.793770] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [99.793854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [99.793938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0

<7> [99.794020] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [99.794104] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0

<7> [99.794188] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a

<7> [99.794282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [99.794432] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.794536] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [99.794641] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.794740] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [99.794839] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.794937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [99.795035] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.795135] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [99.795232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.795329] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [99.795416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [99.795513] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [99.795609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [99.795813] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [99.795908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [99.795991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [99.796075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [99.796185] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.796287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [99.796385] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.796483] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [99.796581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.796709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [99.796809] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.796915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [99.797016] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [99.797115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [99.797200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [99.797287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [99.797376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [99.797462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5

<7> [99.797632] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adls_dmc_ver2_01.bin

<7> [99.798443] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [99.799036] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 20 us

<7> [99.799141] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)

<7> [99.799246] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 22 (22.0 usec)

<7> [99.799367] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 33 (33.0 usec)

<7> [99.799486] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 33 (33.0 usec)

<7> [99.799583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec)

<7> [99.799715] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 48 (48.0 usec)

<7> [99.799826] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 101 (101.0 usec)

<7> [99.799922] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 147 (147.0 usec)

<6> [99.800991] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1)

<7> [99.801485] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 2 display pipes available.

<7> [99.802328] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [99.802438] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [99.802527] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [99.802590] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz

<7> [99.802700] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz

<7> [99.802813] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT)

<7> [99.802899] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A]

<7> [99.802991] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [99.803084] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [99.803174] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [99.803266] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [99.803354] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [99.803441] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [99.803528] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [99.803621] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [99.803717] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [99.803815] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0

<7> [99.803955] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [99.804033] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [99.804104] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [99.804173] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [99.804241] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [99.804388] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [99.804534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [99.804775] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on

<7> [99.804873] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [99.804998] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [99.805085] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [99.805208] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [99.805293] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [100.037622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.066621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.095621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.123621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.152621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.181622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.210622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.239622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.268621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.297621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.326621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.355621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.384621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.413621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.442621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.471621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.500621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.529621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.558621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.587621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.616621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.645621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.674621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.703629] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.732621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.761621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.790622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.819621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.848621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.877621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.906622] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.935621] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [100.935712] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [100.935725] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [100.935752] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off

<7> [100.935880] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [100.935954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [100.936119] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI TC1/PHY B] using AUX D (VBT)

<7> [100.936197] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI TC1/PHY B]

<7> [100.936432] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI TC1/PHY B]

<7> [100.936505] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI TC1/PHY B] Using DDC pin 0x9 (VBT)

<7> [100.936644] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:150:DDI TC2/PHY C] using AUX E (VBT)

<7> [100.936723] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:150:DDI TC2/PHY C]

<7> [100.936881] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:150:DDI TC2/PHY C]

<7> [100.936950] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:150:DDI TC2/PHY C] Using DDC pin 0xa (VBT)

<7> [100.937057] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:160:DDI TC3/PHY D] using AUX F (VBT)

<7> [100.937132] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:160:DDI TC3/PHY D]

<7> [100.937285] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:160:DDI TC3/PHY D]

<7> [100.937354] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:160:DDI TC3/PHY D] Using DDC pin 0xb (VBT)

<7> [100.937459] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:170:DDI TC4/PHY E] using AUX G (VBT)

<7> [100.937532] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:170:DDI TC4/PHY E]

<7> [100.937689] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:170:DDI TC4/PHY E]

<7> [100.937756] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:170:DDI TC4/PHY E] Using DDC pin 0xc (VBT)

<7> [100.938095] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled

<7> [100.938216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled

<7> [100.938303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [100.938386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A

<7> [100.938467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A

<7> [100.938548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A

<7> [100.938638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A

<7> [100.938721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A

<7> [100.938803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B

<7> [100.938881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B

<7> [100.938962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B

<7> [100.939042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B

<7> [100.939121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B

<7> [100.939198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B

<7> [100.939276] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI TC1/PHY B] hw state readout: disabled, pipe A

<7> [100.939350] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A

<7> [100.939422] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B

<7> [100.939498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DDI TC2/PHY C] hw state readout: disabled, pipe A

<7> [100.939573] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:152:DP-MST A] hw state readout: disabled, pipe A

<7> [100.939657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:153:DP-MST B] hw state readout: disabled, pipe B

<7> [100.939739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:160:DDI TC3/PHY D] hw state readout: disabled, pipe A

<7> [100.939814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:162:DP-MST A] hw state readout: disabled, pipe A

<7> [100.939888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:163:DP-MST B] hw state readout: disabled, pipe B

<7> [100.939964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:170:DDI TC4/PHY E] hw state readout: disabled, pipe A

<7> [100.940037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:172:DP-MST A] hw state readout: disabled, pipe A

<7> [100.940109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:173:DP-MST B] hw state readout: disabled, pipe B

<7> [100.940189] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [100.940275] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [100.940358] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [100.940440] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [100.940561] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-1] hw state readout: disabled

<7> [100.940662] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:145:HDMI-A-1] hw state readout: disabled

<7> [100.940751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:151:DP-2] hw state readout: disabled

<7> [100.940834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:157:HDMI-A-2] hw state readout: disabled

<7> [100.940917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:161:DP-3] hw state readout: disabled

<7> [100.940997] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:167:HDMI-A-3] hw state readout: disabled

<7> [100.941082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:171:DP-4] hw state readout: disabled

<7> [100.941166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:177:HDMI-A-4] hw state readout: disabled

<7> [100.941241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [100.941316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz

<7> [100.941391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz

<7> [100.941464] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz

<7> [100.941537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz

<7> [100.941619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz

<7> [100.941698] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [100.941786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz

<7> [100.941860] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz

<7> [100.941934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz

<7> [100.942008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz

<7> [100.942081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz

<7> [100.942158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz

<7> [100.942234] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [100.942370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]

<7> [100.942454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]

<7> [100.942538] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [100.942612] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [100.947413] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K)

<7> [100.947515] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [100.947581] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [100.947663] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [100.947671] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global

<7> [100.948158] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 10 engine workarounds on rcs'0

<7> [100.948246] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [100.948326] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0

<7> [100.948853] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0

<7> [100.948940] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0

<7> [100.949021] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0

<7> [100.949257] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0

<7> [100.949336] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0

<7> [100.949640] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2

<7> [100.949720] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2

<7> [100.949939] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0

<7> [100.950021] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0

<7> [100.950821] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [100.950932] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 4 ext-regs.

<7> [100.951045] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset

<7> [100.964176] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f

<7> [100.964273] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000

<7> [100.964365] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4

<7> [100.964454] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [100.964540] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8

<7> [100.964632] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0xa7800004

<7> [100.964717] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [100.964802] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [100.964886] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [100.964970] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [100.965054] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [100.965139] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [100.965223] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [100.965307] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [100.965391] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [100.966106] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.5.1

<6> [100.966108] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3

<7> [100.967973] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [100.968284] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [100.969236] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads

<6> [100.970571] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled

<6> [100.970573] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled

<6> [100.971241] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled

<7> [100.974500] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping

<7> [100.974598] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping

<7> [100.974696] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [100.974797] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [100.975177] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [100.975243] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [100.975305] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [100.975365] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1

<7> [100.975424] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [100.978542] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY B bus for card0-DP-1

<7> [100.978971] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-1] generating connector hotplug event

<7> [100.979157] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:145:HDMI-A-1] generating connector hotplug event

<7> [100.979334] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY C bus for card0-DP-2

<7> [100.979718] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:151:DP-2] generating connector hotplug event

<7> [100.979888] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:157:HDMI-A-2] generating connector hotplug event

<7> [100.980058] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY D bus for card0-DP-3

<7> [100.980347] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:161:DP-3] generating connector hotplug event

<7> [100.980509] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:167:HDMI-A-3] generating connector hotplug event

<7> [100.980718] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY E bus for card0-DP-4

<7> [100.981005] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:171:DP-4] generating connector hotplug event

<7> [100.981166] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:177:HDMI-A-4] generating connector hotplug event

<6> [100.981188] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [100.982269] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 8 outputs detected

<6> [100.990814] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [100.992798] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10

<7> [100.993354] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [100.993788] [drm:drm_client_modeset_probe]

<7> [100.993786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5

<7> [100.993830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]

<7> [100.993849] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]

<7> [100.993901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [100.994055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [100.994220] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [100.994207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [100.994312] i915 device info: pciid=0xa780 rev=0x04 platform=ALDERLAKE_S (subplatform=0x1) gen=12

<7> [100.994314] i915 device info: graphics version: 12

<7> [100.994315] i915 device info: media version: 12

<7> [100.994316] i915 device info: display version: 12

<7> [100.994317] i915 device info: graphics stepping: D0

<7> [100.994318] i915 device info: media stepping: D0

<7> [100.994319] i915 device info: display stepping: D0

<7> [100.994319] i915 device info: base die stepping: **

<7> [100.994320] i915 device info: gt: 0

<7> [100.994321] i915 device info: memory-regions: 0x21

<7> [100.994322] i915 device info: page-sizes: 0x211000

<7> [100.994323] i915 device info: platform: ALDERLAKE_S

<7> [100.994324] i915 device info: ppgtt-size: 48

<7> [100.994325] i915 device info: ppgtt-type: 2

<7> [100.994325] i915 device info: dma_mask_size: 39

<7> [100.994326] i915 device info: is_mobile: no

<7> [100.994327] i915 device info: is_lp: no

<7> [100.994328] i915 device info: require_force_probe: no

<7> [100.994329] i915 device info: is_dgfx: no

<7> [100.994330] i915 device info: has_64bit_reloc: yes

<7> [100.994330] i915 device info: has_64k_pages: no

<7> [100.994331] i915 device info: gpu_reset_clobbers_display: no

<7> [100.994332] i915 device info: has_reset_engine: yes

<7> [100.994333] i915 device info: has_3d_pipeline: yes

<7> [100.994334] i915 device info: has_4tile: no

<7> [100.994334] i915 device info: has_flat_ccs: no

<7> [100.994341] i915 device info: has_global_mocs: yes

<7> [100.994342] i915 device info: has_gmd_id: no

<7> [100.994343] i915 device info: has_gt_uc: yes

<7> [100.994344] i915 device info: has_heci_pxp: no

<7> [100.994344] i915 device info: has_heci_gscfi: no

<7> [100.994345] i915 device info: has_guc_deprivilege: no

<7> [100.994346] i915 device info: has_l3_ccs_read: no

<7> [100.994347] i915 device info: has_l3_dpf: no

<7> [100.994348] i915 device info: has_llc: yes

<7> [100.994349] i915 device info: has_logical_ring_contexts: yes

<7> [100.994350] i915 device info: has_logical_ring_elsq: yes

<7> [100.994351] i915 device info: has_media_ratio_mode: no

<7> [100.994352] i915 device info: has_mslice_steering: no

<7> [100.994353] i915 device info: has_oa_bpc_reporting: no

<7> [100.994354] i915 device info: has_oa_slice_contrib_limits: no

<7> [100.994355] i915 device info: has_oam: no

<7> [100.994356] i915 device info: has_one_eu_per_fuse_bit: no

<7> [100.994357] i915 device info: has_pxp: yes

<7> [100.994358] i915 device info: has_rc6: yes

<7> [100.994359] i915 device info: has_rc6p: no

<7> [100.994360] i915 device info: has_rps: yes

<7> [100.994361] i915 device info: has_runtime_pm: yes

<7> [100.994362] i915 device info: has_snoop: no

<7> [100.994363] i915 device info: has_coherent_ggtt: no

<7> [100.994364] i915 device info: tuning_thread_rr_after_dep: no

<7> [100.994365] i915 device info: unfenced_needs_alignment: no

<7> [100.994366] i915 device info: hws_needs_physical: no

<7> [100.994367] i915 device info: has_pooled_eu: no

<7> [100.994368] i915 device info: cursor_needs_physical: no

<7> [100.994369] i915 device info: has_cdclk_crawl: no

<7> [100.994370] i915 device info: has_cdclk_squash: no

<7> [100.994371] i915 device info: has_ddi: yes

<7> [100.994372] i915 device info: has_dp_mst: yes

<7> [100.994373] i915 device info: has_dsb: yes

<7> [100.994374] i915 device info: has_fpga_dbg: yes

<7> [100.994375] i915 device info: has_gmch: no

<7> [100.994376] i915 device info: has_hotplug: yes

<7> [100.994377] i915 device info: has_hti: yes

<7> [100.994378] i915 device info: has_ipc: yes

<7> [100.994379] i915 device info: has_overlay: no

<7> [100.994380] i915 device info: has_psr: yes

<7> [100.994381] i915 device info: has_psr_hw_tracking: no

<7> [100.994382] i915 device info: overlay_needs_physical: no

<7> [100.994383] i915 device info: supports_tv: no

<7> [100.994384] i915 device info: has_hdcp: yes

<7> [100.994385] i915 device info: has_dmc: yes

<7> [100.994386] i915 device info: has_dsc: yes

<7> [100.994387] i915 device info: rawclk rate: 19200 kHz

<7> [100.994388] i915 device info: iommu: enabled

<7> [100.994389] i915 device info: available engines: 41403

<7> [100.994391] i915 device info: slice total: 1, mask=0001

<7> [100.994392] i915 device info: subslice total: 2

<7> [100.994393] i915 device info: slice0: 2 subslices, mask=00000003

<7> [100.994394] i915 device info: EU total: 32

<7> [100.994395] i915 device info: EU per subslice: 16

<7> [100.994396] i915 device info: has slice power gating: yes

<7> [100.994398] i915 device info: has subslice power gating: no

<7> [100.994399] i915 device info: has EU power gating: no

<6> [100.994400] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [100.994401] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [100.994402] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [100.994346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [100.994476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [100.995717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [100.996911] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)

<7> [100.997050] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] status updated from unknown to disconnected

<7> [100.997146] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected

<7> [100.997165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]

<7> [100.997179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]

<7> [100.998177] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] status updated from unknown to disconnected

<7> [100.998192] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected

<7> [100.998202] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]

<7> [100.998210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]

<7> [100.999334] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] status updated from unknown to disconnected

<7> [100.999347] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected

<7> [100.999357] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]

<7> [100.999368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]

<7> [101.000524] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] status updated from unknown to disconnected

<7> [101.000536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected

<7> [101.000545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]

<7> [101.000554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]

<6> [101.001090] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100

<7> [101.001693] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] status updated from unknown to disconnected

<7> [101.001702] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected

<7> [101.001709] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]

<7> [101.001717] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]

<7> [101.002893] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] status updated from unknown to disconnected

<7> [101.002902] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected

<7> [101.002910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]

<7> [101.002917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]

<7> [101.004211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] status updated from unknown to disconnected

<7> [101.004221] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected

<7> [101.004229] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]

<7> [101.004236] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]

<7> [101.005276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] status updated from unknown to disconnected

<7> [101.005287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected

<7> [101.005295] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [101.005299] [drm:drm_client_modeset_probe] connector 134 enabled? no

<7> [101.005300] [drm:drm_client_modeset_probe] connector 145 enabled? no

<7> [101.005302] [drm:drm_client_modeset_probe] connector 151 enabled? no

<7> [101.005303] [drm:drm_client_modeset_probe] connector 157 enabled? no

<7> [101.005304] [drm:drm_client_modeset_probe] connector 161 enabled? no

<7> [101.005306] [drm:drm_client_modeset_probe] connector 167 enabled? no

<7> [101.005307] [drm:drm_client_modeset_probe] connector 171 enabled? no

<7> [101.005308] [drm:drm_client_modeset_probe] connector 177 enabled? no

<7> [101.005326] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [101.005331] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [101.005341] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [101.005352] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [101.005638] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [101.005732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [101.006444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [101.006563] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [101.006681] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [101.006786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [101.006888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [101.006987] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [101.007085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [101.007182] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [101.007282] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [101.007378] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [101.007478] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [101.007566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [101.007673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [101.007825] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [101.007959] [drm:drm_client_modeset_probe]

<7> [101.008003] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]

<7> [101.008020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]

<7> [101.008187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected

<7> [101.008201] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]

<7> [101.008214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]

<7> [101.008440] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected

<7> [101.008452] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]

<7> [101.008465] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]

<7> [101.008625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected

<7> [101.008637] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]

<7> [101.008649] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]

<7> [101.008797] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected

<7> [101.008809] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]

<7> [101.008821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]

<7> [101.008963] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected

<7> [101.008975] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]

<7> [101.008986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]

<7> [101.009135] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected

<7> [101.009148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]

<7> [101.009160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]

<7> [101.009291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected

<7> [101.009303] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]

<7> [101.009315] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]

<7> [101.009462] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected

<7> [101.009473] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [101.009477] [drm:drm_client_modeset_probe] connector 134 enabled? no

<7> [101.009480] [drm:drm_client_modeset_probe] connector 145 enabled? no

<7> [101.009482] [drm:drm_client_modeset_probe] connector 151 enabled? no

<7> [101.009485] [drm:drm_client_modeset_probe] connector 157 enabled? no

<7> [101.009487] [drm:drm_client_modeset_probe] connector 161 enabled? no

<7> [101.009489] [drm:drm_client_modeset_probe] connector 167 enabled? no

<7> [101.009492] [drm:drm_client_modeset_probe] connector 171 enabled? no

<7> [101.009494] [drm:drm_client_modeset_probe] connector 177 enabled? no

<7> [101.009517] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [101.009525] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [101.009541] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [101.009556] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [101.009605] [drm:drm_client_modeset_probe]

<7> [101.009647] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]

<7> [101.009660] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]

<7> [101.009808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected

<7> [101.009823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]

<7> [101.009835] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]

<7> [101.009982] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected

<7> [101.009994] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]

<7> [101.010006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]

<7> [101.010147] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected

<7> [101.010158] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]

<7> [101.010170] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]

<7> [101.010311] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected

<7> [101.010323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]

<7> [101.010334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]

<7> [101.010474] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected

<7> [101.010486] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]

<7> [101.010497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]

<7> [101.010710] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected

<7> [101.010723] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]

<7> [101.010735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]

<7> [101.010887] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected

<7> [101.010899] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]

<7> [101.010911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]

<7> [101.011058] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected

<7> [101.011069] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [101.011072] [drm:drm_client_modeset_probe] connector 134 enabled? no

<7> [101.011075] [drm:drm_client_modeset_probe] connector 145 enabled? no

<7> [101.011078] [drm:drm_client_modeset_probe] connector 151 enabled? no

<7> [101.011080] [drm:drm_client_modeset_probe] connector 157 enabled? no

<7> [101.011082] [drm:drm_client_modeset_probe] connector 161 enabled? no

<7> [101.011084] [drm:drm_client_modeset_probe] connector 167 enabled? no

<7> [101.011086] [drm:drm_client_modeset_probe] connector 171 enabled? no

<7> [101.011089] [drm:drm_client_modeset_probe] connector 177 enabled? no

<7> [101.011113] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [101.011120] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [101.011136] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [101.011152] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [101.014907] [IGT] core_hotunplug: reopening DRM device for health check

<7> [101.014936] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [101.015313] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [101.017389] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [101.017589] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [101.017917] [IGT] core_hotunplug: closing health checked device instance

<7> [101.018090] [IGT] core_hotunplug: reopening render device for health check

<7> [101.018110] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [101.018474] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [101.020143] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [101.020388] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [101.020704] [IGT] core_hotunplug: closing health checked device instance

<6> [101.020876] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS

<6> [101.021318] [IGT] core_hotunplug: exiting, ret=0

<6> [101.028721] snd_hda_codec_realtek hdaudioC0D0: ALC711: SKU not ready 0x00000000

<6> [101.029242] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC711: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp

<6> [101.029245] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

<6> [101.029246] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)

<6> [101.029248] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

<6> [101.029249] snd_hda_codec_realtek hdaudioC0D0: inputs:

<6> [101.029250] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13

<6> [101.029251] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19

<6> [101.029253] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12

Results for igt@core_hotunplug@unbind-rebind