igt@core_hotunplug@unbind-rebind on bat-rpls-1@linus-v6.5-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gfaa966f69 (x86_64) (Linux: 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: unbind-rebind Opened device: /dev/dri/renderD128 Unloaded audio driver snd_hda_intel Realoading snd_hda_intel Subtest unbind-rebind: SUCCESS (1.690s)
Err	Starting subtest: unbind-rebind Subtest unbind-rebind: SUCCESS (1.690s)
Dmesg	<6> [126.450803] Console: switching to colour dummy device 80x25 <6> [126.451017] [IGT] core_hotunplug: executing <7> [126.462913] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [126.463254] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [126.463361] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [126.464329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.467155] [IGT] core_hotunplug: closing selected device instance <7> [126.467287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [126.467975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.469192] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.469307] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.469412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.469514] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.469619] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.469723] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [126.469827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.469934] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [126.470036] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.470139] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [126.470241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [126.470336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.470425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6> [126.471934] [IGT] core_hotunplug: starting subtest unbind-rebind <7> [126.479200] [IGT] core_hotunplug: reopening DRM device for health check <7> [126.479225] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [126.479593] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [126.487286] [IGT] core_hotunplug: running device sysfs healthcheck <7> [126.487480] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [126.487765] [IGT] core_hotunplug: closing health checked device instance <7> [126.487989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [126.489637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.490439] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.490552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.490669] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.490776] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.490881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.490986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [126.491090] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.491199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [126.491304] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.491409] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [126.491511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [126.491612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.491702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.493143] [IGT] core_hotunplug: reopening render device for health check <7> [126.493164] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [126.493533] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [126.500982] [IGT] core_hotunplug: running device sysfs healthcheck <7> [126.501218] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [126.501500] [IGT] core_hotunplug: closing health checked device instance <7> [126.501697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [126.502933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.504218] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.504336] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.504445] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.504553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.504668] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.504773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [126.504878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.504986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [126.505090] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.505193] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [126.505293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [126.505390] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.505483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.616382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [126.617123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.618348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.618461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.618563] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.618677] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.618777] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.618881] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [126.618983] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.619087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [126.619185] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.619283] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [126.619367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [126.619456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [126.619617] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [126.632402] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [126.632507] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [126.632599] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [126.632912] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [126.633000] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [126.633087] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [126.633172] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [126.633258] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [126.633344] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [126.633428] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [126.633513] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [126.633602] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [126.633705] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [126.633794] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [126.633880] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [126.633965] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [126.634050] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [126.634135] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [126.634218] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [126.634301] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [126.634386] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [126.634471] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [126.634555] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [126.634649] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [126.634739] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [126.634827] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [126.634913] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [126.635000] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [126.635084] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [126.635168] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [126.635252] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [126.635337] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [126.635420] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [126.635504] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [126.635588] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [126.635684] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [126.636266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [126.636438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [126.636538] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0) <7> [126.636637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [126.636730] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.636818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.703834] [IGT] core_hotunplug: unbinding the driver from the device <7> [126.704075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [126.705314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.706517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.706990] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.707407] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.707867] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.708274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.708696] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [126.709099] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.709503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [126.709936] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.710360] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [126.710771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [126.711164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [126.711717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [126.712101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5 <7> [126.743035] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [126.808654] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [126.809441] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [126.917375] [IGT] core_hotunplug: rebinding the driver to the device <7> [126.918992] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7> [126.919234] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7> [126.919467] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH <7> [126.919659] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [126.919902] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz <7> [126.920025] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7> [126.920146] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <7> [126.920978] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [126.921097] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [126.921211] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [126.921318] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [126.921352] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [126.921755] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [126.921773] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000021200087 <7> [126.921918] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [126.922422] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x16a0b018 <7> [126.922585] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [126.922770] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [126.922901] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [126.923028] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [126.923161] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [126.923282] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4 <7> [126.923358] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [126.923429] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=4801 tRP=39 tRDPRE=17 tRAS=76 tRCD=39 tRC=115 <7> [126.923563] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32 <7> [126.923707] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=48 <7> [126.923836] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=64 <7> [126.923957] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=15471 peakbw: 76816 <7> [126.924074] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133 <7> [126.924190] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=51200 <7> [126.924302] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=68267 <7> [126.924414] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21375 peakbw: 76816 <7> [126.924520] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133 <7> [126.924632] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=51200 <7> [126.924743] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=68267 <7> [126.924855] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=26415 peakbw: 76816 <7> [126.924964] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133 <7> [126.925069] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=51200 <7> [126.925171] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=68267 <7> [126.925272] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29946 peakbw: 76816 <7> [126.925367] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133 <7> [126.925462] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=51200 <7> [126.925559] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=68267 <7> [126.925663] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=32092 peakbw: 76816 <7> [126.925759] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133 <7> [126.925856] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=51200 <7> [126.925955] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=68267 <7> [126.926047] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=33283 peakbw: 76816 <7> [126.926139] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133 <7> [126.926230] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=51200 <7> [126.926318] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=68267 <7> [126.926893] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [126.927015] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 250 <7> [126.927113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7> [126.927206] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5) <7> [126.927296] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [126.927384] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [126.927472] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 812, min size 812) <7> [126.927559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7> [126.927657] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [126.927749] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [126.927837] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7> [126.927923] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7> [126.928010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7> [126.928097] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [126.928184] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [126.928272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [126.928360] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [126.928447] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [126.928533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [126.928626] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [126.928718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [126.928807] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [126.928895] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [126.928981] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same DDC pin (0xa) as port A, disabling port A DVI/HDMI support <7> [126.929066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [126.929152] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [126.929236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [126.929325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7> [126.929413] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI max TMDS clock: 297000 kHz <7> [126.929499] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [126.929584] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [126.929689] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [126.929774] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7> [126.929858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [126.929943] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7> [126.930029] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7> [126.930123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.930256] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.930361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.930460] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.930559] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.930672] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.930789] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [126.930906] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.931007] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [126.931105] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.931202] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [126.931287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.931381] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.931480] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.931601] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [126.931704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.931788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [126.931872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.931982] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.932086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.932187] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.932287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.932386] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.932483] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [126.932581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.932688] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [126.932785] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.932882] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [126.932965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [126.933053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [126.933141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [126.933228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5 <7> [126.933391] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adls_dmc_ver2_01.bin <7> [126.934114] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [126.934683] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 20 us <7> [126.934793] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec) <7> [126.934883] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 22 (22.0 usec) <7> [126.934996] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 33 (33.0 usec) <7> [126.935111] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 33 (33.0 usec) <7> [126.935202] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec) <7> [126.935314] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 48 (48.0 usec) <7> [126.935418] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 101 (101.0 usec) <7> [126.935506] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 147 (147.0 usec) <6> [126.935881] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1) <7> [126.937232] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 2 display pipes available. <7> [126.938049] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.938162] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [126.938255] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <7> [126.938318] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7> [126.938415] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7> [126.938523] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT) <7> [126.938619] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A] <7> [126.938769] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [126.938874] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [126.938970] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [126.939066] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [126.939159] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [126.939252] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [126.939345] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [126.939437] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [126.939527] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [126.939648] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0 <7> [126.939808] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [126.939884] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [126.939956] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [126.940025] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [126.940095] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [126.940245] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [126.940399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [126.940639] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on <7> [126.940737] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [126.940862] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [126.940953] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [126.941077] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [126.941166] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [127.175612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.204612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.233611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.262611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.291612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.320611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.349612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.378611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.407612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.436612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.465611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.494611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.523612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.552612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.581612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.610611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.639612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.668613] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.697611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.726611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.755612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.784611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.813611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.842611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.871612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.900611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.929611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.958611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [127.987612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [128.016612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [128.045611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [128.074611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [128.074703] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [128.074717] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [128.074744] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off <7> [128.074869] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [128.074945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [128.075114] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI TC1/PHY B] using AUX D (VBT) <7> [128.075212] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI TC1/PHY B] <7> [128.075425] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI TC1/PHY B] <7> [128.075498] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI TC1/PHY B] Using DDC pin 0x9 (VBT) <7> [128.075635] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:150:DDI TC2/PHY C] using AUX E (VBT) <7> [128.075713] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:150:DDI TC2/PHY C] <7> [128.075869] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:150:DDI TC2/PHY C] <7> [128.075937] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:150:DDI TC2/PHY C] Using DDC pin 0xa (VBT) <7> [128.076044] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:160:DDI TC3/PHY D] using AUX F (VBT) <7> [128.076118] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:160:DDI TC3/PHY D] <7> [128.076267] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:160:DDI TC3/PHY D] <7> [128.076337] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:160:DDI TC3/PHY D] Using DDC pin 0xb (VBT) <7> [128.076443] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:170:DDI TC4/PHY E] using AUX G (VBT) <7> [128.076515] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:170:DDI TC4/PHY E] <7> [128.076669] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:170:DDI TC4/PHY E] <7> [128.076741] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:170:DDI TC4/PHY E] Using DDC pin 0xc (VBT) <7> [128.077087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled <7> [128.077207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7> [128.077294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [128.077379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7> [128.077460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7> [128.077542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7> [128.077634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7> [128.077718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7> [128.077800] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7> [128.077879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7> [128.077956] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7> [128.078033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7> [128.078109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7> [128.078185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7> [128.078262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI TC1/PHY B] hw state readout: disabled, pipe A <7> [128.078334] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A <7> [128.078410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B <7> [128.078490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DDI TC2/PHY C] hw state readout: disabled, pipe A <7> [128.078566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:152:DP-MST A] hw state readout: disabled, pipe A <7> [128.078648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:153:DP-MST B] hw state readout: disabled, pipe B <7> [128.078728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:160:DDI TC3/PHY D] hw state readout: disabled, pipe A <7> [128.078805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:162:DP-MST A] hw state readout: disabled, pipe A <7> [128.078881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:163:DP-MST B] hw state readout: disabled, pipe B <7> [128.078959] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:170:DDI TC4/PHY E] hw state readout: disabled, pipe A <7> [128.079033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:172:DP-MST A] hw state readout: disabled, pipe A <7> [128.079106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:173:DP-MST B] hw state readout: disabled, pipe B <7> [128.079182] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [128.079266] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [128.079349] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [128.079430] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [128.079551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-1] hw state readout: disabled <7> [128.079644] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:145:HDMI-A-1] hw state readout: disabled <7> [128.079728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:151:DP-2] hw state readout: disabled <7> [128.079813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:157:HDMI-A-2] hw state readout: disabled <7> [128.079894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:161:DP-3] hw state readout: disabled <7> [128.079977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:167:HDMI-A-3] hw state readout: disabled <7> [128.080058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:171:DP-4] hw state readout: disabled <7> [128.080138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:177:HDMI-A-4] hw state readout: disabled <7> [128.080211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [128.080283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7> [128.080355] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7> [128.080427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7> [128.080499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7> [128.080570] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7> [128.080650] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [128.080739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7> [128.080821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7> [128.080897] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7> [128.080970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7> [128.081043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7> [128.081115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7> [128.081188] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [128.081322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state] <7> [128.081406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7> [128.081488] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [128.081562] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [128.086316] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K) <7> [128.086408] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [128.086471] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [128.086539] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [128.086546] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7> [128.087053] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 10 engine workarounds on rcs'0 <7> [128.087135] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [128.087212] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7> [128.087776] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7> [128.087863] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0 <7> [128.087940] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0 <7> [128.088154] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7> [128.088226] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0 <7> [128.088446] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7> [128.088521] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2 <7> [128.088745] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7> [128.088819] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0 <7> [128.089519] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [128.089630] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 4 ext-regs. <7> [128.089741] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset <7> [128.102646] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f <7> [128.102743] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000 <7> [128.102831] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7> [128.102918] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [128.103004] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8 <7> [128.103089] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0xa7800004 <7> [128.103173] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [128.103255] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [128.103337] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [128.103417] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [128.103498] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [128.103578] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [128.103668] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [128.103752] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [128.103835] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [128.105227] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.5.1 <6> [128.105229] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 <7> [128.107084] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1350MHz, before = 1350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [128.107385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [128.108202] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads <6> [128.108835] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [128.108837] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6> [128.109371] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7> [128.112620] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping <7> [128.112712] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7> [128.112798] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [128.112890] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [128.113264] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [128.113327] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [128.113386] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [128.113443] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7> [128.113500] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [128.117012] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY B bus for card0-DP-1 <7> [128.117658] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-1] generating connector hotplug event <7> [128.117863] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:145:HDMI-A-1] generating connector hotplug event <7> [128.118070] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY C bus for card0-DP-2 <7> [128.118481] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:151:DP-2] generating connector hotplug event <7> [128.118686] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:157:HDMI-A-2] generating connector hotplug event <7> [128.118882] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY D bus for card0-DP-3 <7> [128.119237] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:161:DP-3] generating connector hotplug event <7> [128.119423] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:167:HDMI-A-3] generating connector hotplug event <7> [128.119625] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY E bus for card0-DP-4 <7> [128.119989] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:171:DP-4] generating connector hotplug event <7> [128.120175] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:177:HDMI-A-4] generating connector hotplug event <6> [128.120202] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [128.121313] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 8 outputs detected <6> [128.129822] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [128.132357] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 <7> [128.133199] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [128.133490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5 <7> [128.133595] [drm:drm_client_modeset_probe] <7> [128.133601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [128.133652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] <7> [128.133673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1] <7> [128.133835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [128.133924] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [128.134016] i915 device info: pciid=0xa780 rev=0x04 platform=ALDERLAKE_S (subplatform=0x1) gen=12 <7> [128.134018] i915 device info: graphics version: 12 <7> [128.134019] i915 device info: media version: 12 <7> [128.134020] i915 device info: display version: 12 <7> [128.134021] i915 device info: graphics stepping: D0 <7> [128.134022] i915 device info: media stepping: D0 <7> [128.134023] i915 device info: display stepping: D0 <7> [128.134024] i915 device info: base die stepping: ** <7> [128.134025] i915 device info: gt: 0 <7> [128.134027] i915 device info: memory-regions: 0x21 <7> [128.134028] i915 device info: page-sizes: 0x211000 <7> [128.134029] i915 device info: platform: ALDERLAKE_S <7> [128.134030] i915 device info: ppgtt-size: 48 <7> [128.134031] i915 device info: ppgtt-type: 2 <7> [128.134032] i915 device info: dma_mask_size: 39 <7> [128.134033] i915 device info: is_mobile: no <7> [128.134034] i915 device info: is_lp: no <7> [128.134035] i915 device info: require_force_probe: no <7> [128.134036] i915 device info: is_dgfx: no <7> [128.134037] i915 device info: has_64bit_reloc: yes <7> [128.134038] i915 device info: has_64k_pages: no <7> [128.134039] i915 device info: gpu_reset_clobbers_display: no <7> [128.134040] i915 device info: has_reset_engine: yes <7> [128.134041] i915 device info: has_3d_pipeline: yes <7> [128.134042] i915 device info: has_4tile: no <7> [128.134043] i915 device info: has_flat_ccs: no <7> [128.134044] i915 device info: has_global_mocs: yes <7> [128.134045] i915 device info: has_gmd_id: no <7> [128.134046] i915 device info: has_gt_uc: yes <7> [128.134047] i915 device info: has_heci_pxp: no <7> [128.134048] i915 device info: has_heci_gscfi: no <7> [128.134049] i915 device info: has_guc_deprivilege: no <7> [128.134050] i915 device info: has_l3_ccs_read: no <7> [128.133988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [128.134051] i915 device info: has_l3_dpf: no <7> [128.134052] i915 device info: has_llc: yes <7> [128.134053] i915 device info: has_logical_ring_contexts: yes <7> [128.134054] i915 device info: has_logical_ring_elsq: yes <7> [128.134054] i915 device info: has_media_ratio_mode: no <7> [128.134055] i915 device info: has_mslice_steering: no <7> [128.134056] i915 device info: has_oa_bpc_reporting: no <7> [128.134057] i915 device info: has_oa_slice_contrib_limits: no <7> [128.134058] i915 device info: has_oam: no <7> [128.134059] i915 device info: has_one_eu_per_fuse_bit: no <7> [128.134059] i915 device info: has_pxp: yes <7> [128.134060] i915 device info: has_rc6: yes <7> [128.134061] i915 device info: has_rc6p: no <7> [128.134062] i915 device info: has_rps: yes <7> [128.134063] i915 device info: has_runtime_pm: yes <7> [128.134064] i915 device info: has_snoop: no <7> [128.134065] i915 device info: has_coherent_ggtt: no <7> [128.134065] i915 device info: tuning_thread_rr_after_dep: no <7> [128.134066] i915 device info: unfenced_needs_alignment: no <7> [128.134067] i915 device info: hws_needs_physical: no <7> [128.134068] i915 device info: has_pooled_eu: no <7> [128.134069] i915 device info: cursor_needs_physical: no <7> [128.134069] i915 device info: has_cdclk_crawl: no <7> [128.134070] i915 device info: has_cdclk_squash: no <7> [128.134071] i915 device info: has_ddi: yes <7> [128.134072] i915 device info: has_dp_mst: yes <7> [128.134073] i915 device info: has_dsb: yes <7> [128.134073] i915 device info: has_fpga_dbg: yes <7> [128.134074] i915 device info: has_gmch: no <7> [128.134075] i915 device info: has_hotplug: yes <7> [128.134076] i915 device info: has_hti: yes <7> [128.134077] i915 device info: has_ipc: yes <7> [128.134077] i915 device info: has_overlay: no <7> [128.134078] i915 device info: has_psr: yes <7> [128.134079] i915 device info: has_psr_hw_tracking: no <7> [128.134080] i915 device info: overlay_needs_physical: no <7> [128.134081] i915 device info: supports_tv: no <7> [128.134081] i915 device info: has_hdcp: yes <7> [128.134082] i915 device info: has_dmc: yes <7> [128.134083] i915 device info: has_dsc: yes <7> [128.134084] i915 device info: rawclk rate: 19200 kHz <7> [128.134085] i915 device info: iommu: enabled <7> [128.134086] i915 device info: available engines: 41403 <7> [128.134087] i915 device info: slice total: 1, mask=0001 <7> [128.134088] i915 device info: subslice total: 2 <7> [128.134089] i915 device info: slice0: 2 subslices, mask=00000003 <7> [128.134090] i915 device info: EU total: 32 <7> [128.134091] i915 device info: EU per subslice: 16 <7> [128.134092] i915 device info: has slice power gating: yes <7> [128.134093] i915 device info: has subslice power gating: no <7> [128.134094] i915 device info: has EU power gating: no <6> [128.134094] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [128.134095] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [128.134096] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [128.134143] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [128.134267] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [128.135499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [128.136698] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0) <7> [128.136839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] status updated from unknown to disconnected <7> [128.136888] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected <7> [128.136905] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] <7> [128.136917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1] <7> [128.137916] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] status updated from unknown to disconnected <7> [128.137931] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected <7> [128.137941] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] <7> [128.137950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2] <7> [128.139534] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] status updated from unknown to disconnected <7> [128.139547] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected <7> [128.139555] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] <7> [128.139563] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2] <7> [128.140283] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] status updated from unknown to disconnected <7> [128.140297] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected <7> [128.140305] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] <7> [128.140315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3] <7> [128.141483] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] status updated from unknown to disconnected <7> [128.141494] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected <7> [128.141501] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] <7> [128.141509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3] <6> [128.142057] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7> [128.142674] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] status updated from unknown to disconnected <7> [128.142684] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected <7> [128.142691] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] <7> [128.142698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4] <7> [128.144276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] status updated from unknown to disconnected <7> [128.144288] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected <7> [128.144296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] <7> [128.144304] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4] <7> [128.145066] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] status updated from unknown to disconnected <7> [128.145077] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected <7> [128.145084] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [128.145088] [drm:drm_client_modeset_probe] connector 134 enabled? no <7> [128.145090] [drm:drm_client_modeset_probe] connector 145 enabled? no <7> [128.145091] [drm:drm_client_modeset_probe] connector 151 enabled? no <7> [128.145093] [drm:drm_client_modeset_probe] connector 157 enabled? no <7> [128.145094] [drm:drm_client_modeset_probe] connector 161 enabled? no <7> [128.145095] [drm:drm_client_modeset_probe] connector 167 enabled? no <7> [128.145097] [drm:drm_client_modeset_probe] connector 171 enabled? no <7> [128.145098] [drm:drm_client_modeset_probe] connector 177 enabled? no <7> [128.145120] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [128.145126] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [128.145151] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [128.145165] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [128.145440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [128.146240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [128.147494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.147631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [128.147758] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.148153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [128.148260] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.148361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [128.148462] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.148566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [128.149097] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.149208] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [128.149410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [128.149507] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [128.149597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [128.150869] [drm:drm_client_modeset_probe] <7> [128.150912] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] <6> [128.150888] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [128.150933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1] <7> [128.150997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [128.151995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [128.153281] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.153392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [128.153498] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.153601] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [128.153716] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.153816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [128.153966] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.154068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [128.154167] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.154265] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it. <7> [128.154350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [128.154440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [128.154635] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected <7> [128.154601] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [128.154651] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] <7> [128.154664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1] <7> [128.154826] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected <7> [128.154839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] <7> [128.154851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2] <7> [128.155006] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected <7> [128.155018] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] <7> [128.155030] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2] <7> [128.155182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected <7> [128.155194] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] <7> [128.155206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3] <7> [128.155353] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected <7> [128.155365] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] <7> [128.155377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3] <7> [128.155528] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected <7> [128.155540] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] <7> [128.155551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4] <7> [128.155707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected <7> [128.155720] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] <7> [128.155732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4] <7> [128.155880] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected <7> [128.155892] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [128.155899] [drm:drm_client_modeset_probe] connector 134 enabled? no <7> [128.155901] [drm:drm_client_modeset_probe] connector 145 enabled? no <7> [128.155904] [drm:drm_client_modeset_probe] connector 151 enabled? no <7> [128.155906] [drm:drm_client_modeset_probe] connector 157 enabled? no <7> [128.155908] [drm:drm_client_modeset_probe] connector 161 enabled? no <7> [128.155911] [drm:drm_client_modeset_probe] connector 167 enabled? no <7> [128.155913] [drm:drm_client_modeset_probe] connector 171 enabled? no <7> [128.155915] [drm:drm_client_modeset_probe] connector 177 enabled? no <7> [128.155939] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [128.155948] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [128.155962] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [128.155978] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [128.156029] [drm:drm_client_modeset_probe] <7> [128.156062] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] <7> [128.156075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1] <7> [128.156233] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected <7> [128.156245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] <7> [128.156257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1] <7> [128.156409] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected <7> [128.156422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] <7> [128.156434] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2] <7> [128.156583] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected <7> [128.156595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] <7> [128.156616] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2] <7> [128.156766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected <7> [128.156779] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] <7> [128.156790] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3] <7> [128.156932] [IGT] core_hotunplug: reopening DRM device for health check <7> [128.156940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected <7> [128.156953] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] <7> [128.156961] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [128.156965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3] <7> [128.157109] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected <7> [128.157122] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] <7> [128.157133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4] <7> [128.157274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected <7> [128.157286] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] <7> [128.157325] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [128.157298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4] <7> [128.157442] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected <7> [128.157454] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [128.157457] [drm:drm_client_modeset_probe] connector 134 enabled? no <7> [128.157459] [drm:drm_client_modeset_probe] connector 145 enabled? no <7> [128.157461] [drm:drm_client_modeset_probe] connector 151 enabled? no <7> [128.157464] [drm:drm_client_modeset_probe] connector 157 enabled? no <7> [128.157466] [drm:drm_client_modeset_probe] connector 161 enabled? no <7> [128.157468] [drm:drm_client_modeset_probe] connector 167 enabled? no <7> [128.157470] [drm:drm_client_modeset_probe] connector 171 enabled? no <7> [128.157472] [drm:drm_client_modeset_probe] connector 177 enabled? no <7> [128.157491] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [128.157499] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [128.157513] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [128.157529] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [128.159048] [IGT] core_hotunplug: running device sysfs healthcheck <7> [128.159246] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [128.159558] [IGT] core_hotunplug: closing health checked device instance <7> [128.159758] [IGT] core_hotunplug: reopening render device for health check <7> [128.159779] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [128.160132] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [128.161539] [IGT] core_hotunplug: running device sysfs healthcheck <7> [128.161791] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [128.162088] [IGT] core_hotunplug: closing health checked device instance <6> [128.162255] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS <6> [128.162694] [IGT] core_hotunplug: exiting, ret=0 <6> [128.175660] snd_hda_codec_realtek hdaudioC0D0: ALC711: SKU not ready 0x00000000 <6> [128.176181] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC711: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp <6> [128.176184] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [128.176185] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [128.176186] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 <6> [128.176187] snd_hda_codec_realtek hdaudioC0D0: inputs: <6> [128.176189] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13 <6> [128.176190] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 <6> [128.176191] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12

<6> [126.450803] Console: switching to colour dummy device 80x25

<6> [126.451017] [IGT] core_hotunplug: executing

<7> [126.462913] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [126.463254] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [126.463361] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [126.464329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.467155] [IGT] core_hotunplug: closing selected device instance

<7> [126.467287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [126.467975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.469192] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.469307] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.469412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.469514] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.469619] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.469723] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [126.469827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.469934] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [126.470036] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.470139] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [126.470241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [126.470336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.470425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<6> [126.471934] [IGT] core_hotunplug: starting subtest unbind-rebind

<7> [126.479200] [IGT] core_hotunplug: reopening DRM device for health check

<7> [126.479225] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [126.479593] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [126.487286] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [126.487480] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [126.487765] [IGT] core_hotunplug: closing health checked device instance

<7> [126.487989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [126.489637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.490439] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.490552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.490669] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.490776] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.490881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.490986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [126.491090] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.491199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [126.491304] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.491409] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [126.491511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [126.491612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.491702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.493143] [IGT] core_hotunplug: reopening render device for health check

<7> [126.493164] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [126.493533] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [126.500982] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [126.501218] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [126.501500] [IGT] core_hotunplug: closing health checked device instance

<7> [126.501697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [126.502933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.504218] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.504336] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.504445] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.504553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.504668] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.504773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [126.504878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.504986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [126.505090] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.505193] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [126.505293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [126.505390] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.505483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.616382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [126.617123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.618348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.618461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.618563] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.618677] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.618777] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.618881] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [126.618983] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.619087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [126.619185] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.619283] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [126.619367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [126.619456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [126.619617] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [126.632402] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [126.632507] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [126.632599] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [126.632912] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [126.633000] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [126.633087] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [126.633172] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [126.633258] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [126.633344] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [126.633428] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [126.633513] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [126.633602] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [126.633705] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [126.633794] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [126.633880] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [126.633965] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [126.634050] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [126.634135] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [126.634218] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [126.634301] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [126.634386] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [126.634471] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [126.634555] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [126.634649] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [126.634739] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [126.634827] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [126.634913] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [126.635000] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [126.635084] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [126.635168] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [126.635252] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [126.635337] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [126.635420] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [126.635504] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [126.635588] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [126.635684] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [126.636266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [126.636438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [126.636538] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)

<7> [126.636637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [126.636730] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.636818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.703834] [IGT] core_hotunplug: unbinding the driver from the device

<7> [126.704075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [126.705314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.706517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.706990] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.707407] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.707867] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.708274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.708696] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [126.709099] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.709503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [126.709936] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.710360] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [126.710771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [126.711164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [126.711717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [126.712101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5

<7> [126.743035] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [126.808654] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [126.809441] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [126.917375] [IGT] core_hotunplug: rebinding the driver to the device

<7> [126.918992] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K

<7> [126.919234] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)

<7> [126.919467] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH

<7> [126.919659] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [126.919902] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz

<7> [126.920025] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005

<7> [126.920146] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001

<7> [126.920978] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [126.921097] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [126.921211] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [126.921318] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [126.921352] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [126.921755] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [126.921773] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000021200087

<7> [126.921918] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [126.922422] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x16a0b018

<7> [126.922585] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [126.922770] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [126.922901] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [126.923028] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [126.923161] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [126.923282] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4

<7> [126.923358] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [126.923429] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=4801 tRP=39 tRDPRE=17 tRAS=76 tRCD=39 tRC=115

<7> [126.923563] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32

<7> [126.923707] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=48

<7> [126.923836] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=64

<7> [126.923957] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=15471 peakbw: 76816

<7> [126.924074] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133

<7> [126.924190] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=51200

<7> [126.924302] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=68267

<7> [126.924414] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21375 peakbw: 76816

<7> [126.924520] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133

<7> [126.924632] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=51200

<7> [126.924743] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=68267

<7> [126.924855] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=26415 peakbw: 76816

<7> [126.924964] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133

<7> [126.925069] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=51200

<7> [126.925171] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=68267

<7> [126.925272] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29946 peakbw: 76816

<7> [126.925367] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133

<7> [126.925462] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=51200

<7> [126.925559] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=68267

<7> [126.925663] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=32092 peakbw: 76816

<7> [126.925759] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133

<7> [126.925856] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=51200

<7> [126.925955] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=68267

<7> [126.926047] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=33283 peakbw: 76816

<7> [126.926139] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133

<7> [126.926230] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=51200

<7> [126.926318] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=68267

<7> [126.926893] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [126.927015] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 250

<7> [126.927113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)

<7> [126.927206] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)

<7> [126.927296] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [126.927384] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [126.927472] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 812, min size 812)

<7> [126.927559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)

<7> [126.927657] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [126.927749] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [126.927837] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)

<7> [126.927923] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)

<7> [126.928010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78)

<7> [126.928097] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [126.928184] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [126.928272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [126.928360] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [126.928447] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [126.928533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [126.928626] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [126.928718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [126.928807] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [126.928895] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [126.928981] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same DDC pin (0xa) as port A, disabling port A DVI/HDMI support

<7> [126.929066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [126.929152] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [126.929236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [126.929325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0

<7> [126.929413] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI max TMDS clock: 297000 kHz

<7> [126.929499] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [126.929584] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [126.929689] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [126.929774] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0

<7> [126.929858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [126.929943] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0

<7> [126.930029] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a

<7> [126.930123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.930256] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.930361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.930460] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.930559] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.930672] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.930789] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [126.930906] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.931007] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [126.931105] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.931202] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [126.931287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.931381] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.931480] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.931601] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [126.931704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.931788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [126.931872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.931982] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.932086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.932187] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.932287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.932386] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.932483] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [126.932581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.932688] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [126.932785] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.932882] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [126.932965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [126.933053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [126.933141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [126.933228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5

<7> [126.933391] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adls_dmc_ver2_01.bin

<7> [126.934114] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [126.934683] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 20 us

<7> [126.934793] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)

<7> [126.934883] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 22 (22.0 usec)

<7> [126.934996] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 33 (33.0 usec)

<7> [126.935111] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 33 (33.0 usec)

<7> [126.935202] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec)

<7> [126.935314] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 48 (48.0 usec)

<7> [126.935418] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 101 (101.0 usec)

<7> [126.935506] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 147 (147.0 usec)

<6> [126.935881] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1)

<7> [126.937232] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 2 display pipes available.

<7> [126.938049] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.938162] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [126.938255] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [126.938318] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz

<7> [126.938415] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz

<7> [126.938523] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT)

<7> [126.938619] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A]

<7> [126.938769] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [126.938874] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [126.938970] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [126.939066] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [126.939159] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [126.939252] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [126.939345] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [126.939437] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [126.939527] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [126.939648] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0

<7> [126.939808] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [126.939884] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [126.939956] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [126.940025] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [126.940095] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [126.940245] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [126.940399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [126.940639] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on

<7> [126.940737] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [126.940862] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [126.940953] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [126.941077] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [126.941166] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [127.175612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.204612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.233611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.262611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.291612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.320611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.349612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.378611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.407612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.436612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.465611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.494611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.523612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.552612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.581612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.610611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.639612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.668613] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.697611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.726611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.755612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.784611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.813611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.842611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.871612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.900611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.929611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.958611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [127.987612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [128.016612] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [128.045611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [128.074611] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [128.074703] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [128.074717] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [128.074744] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off

<7> [128.074869] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [128.074945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [128.075114] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI TC1/PHY B] using AUX D (VBT)

<7> [128.075212] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI TC1/PHY B]

<7> [128.075425] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI TC1/PHY B]

<7> [128.075498] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI TC1/PHY B] Using DDC pin 0x9 (VBT)

<7> [128.075635] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:150:DDI TC2/PHY C] using AUX E (VBT)

<7> [128.075713] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:150:DDI TC2/PHY C]

<7> [128.075869] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:150:DDI TC2/PHY C]

<7> [128.075937] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:150:DDI TC2/PHY C] Using DDC pin 0xa (VBT)

<7> [128.076044] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:160:DDI TC3/PHY D] using AUX F (VBT)

<7> [128.076118] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:160:DDI TC3/PHY D]

<7> [128.076267] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:160:DDI TC3/PHY D]

<7> [128.076337] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:160:DDI TC3/PHY D] Using DDC pin 0xb (VBT)

<7> [128.076443] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:170:DDI TC4/PHY E] using AUX G (VBT)

<7> [128.076515] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:170:DDI TC4/PHY E]

<7> [128.076669] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:170:DDI TC4/PHY E]

<7> [128.076741] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:170:DDI TC4/PHY E] Using DDC pin 0xc (VBT)

<7> [128.077087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled

<7> [128.077207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled

<7> [128.077294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [128.077379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A

<7> [128.077460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A

<7> [128.077542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A

<7> [128.077634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A

<7> [128.077718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A

<7> [128.077800] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B

<7> [128.077879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B

<7> [128.077956] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B

<7> [128.078033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B

<7> [128.078109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B

<7> [128.078185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B

<7> [128.078262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI TC1/PHY B] hw state readout: disabled, pipe A

<7> [128.078334] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A

<7> [128.078410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B

<7> [128.078490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DDI TC2/PHY C] hw state readout: disabled, pipe A

<7> [128.078566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:152:DP-MST A] hw state readout: disabled, pipe A

<7> [128.078648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:153:DP-MST B] hw state readout: disabled, pipe B

<7> [128.078728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:160:DDI TC3/PHY D] hw state readout: disabled, pipe A

<7> [128.078805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:162:DP-MST A] hw state readout: disabled, pipe A

<7> [128.078881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:163:DP-MST B] hw state readout: disabled, pipe B

<7> [128.078959] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:170:DDI TC4/PHY E] hw state readout: disabled, pipe A

<7> [128.079033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:172:DP-MST A] hw state readout: disabled, pipe A

<7> [128.079106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:173:DP-MST B] hw state readout: disabled, pipe B

<7> [128.079182] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [128.079266] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [128.079349] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [128.079430] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [128.079551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-1] hw state readout: disabled

<7> [128.079644] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:145:HDMI-A-1] hw state readout: disabled

<7> [128.079728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:151:DP-2] hw state readout: disabled

<7> [128.079813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:157:HDMI-A-2] hw state readout: disabled

<7> [128.079894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:161:DP-3] hw state readout: disabled

<7> [128.079977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:167:HDMI-A-3] hw state readout: disabled

<7> [128.080058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:171:DP-4] hw state readout: disabled

<7> [128.080138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:177:HDMI-A-4] hw state readout: disabled

<7> [128.080211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [128.080283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz

<7> [128.080355] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz

<7> [128.080427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz

<7> [128.080499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz

<7> [128.080570] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz

<7> [128.080650] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [128.080739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz

<7> [128.080821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz

<7> [128.080897] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz

<7> [128.080970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz

<7> [128.081043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz

<7> [128.081115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz

<7> [128.081188] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [128.081322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]

<7> [128.081406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]

<7> [128.081488] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [128.081562] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [128.086316] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K)

<7> [128.086408] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [128.086471] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [128.086539] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [128.086546] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global

<7> [128.087053] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 10 engine workarounds on rcs'0

<7> [128.087135] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [128.087212] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0

<7> [128.087776] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0

<7> [128.087863] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0

<7> [128.087940] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0

<7> [128.088154] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0

<7> [128.088226] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0

<7> [128.088446] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2

<7> [128.088521] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2

<7> [128.088745] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0

<7> [128.088819] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0

<7> [128.089519] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [128.089630] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 4 ext-regs.

<7> [128.089741] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset

<7> [128.102646] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f

<7> [128.102743] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000

<7> [128.102831] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4

<7> [128.102918] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [128.103004] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8

<7> [128.103089] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0xa7800004

<7> [128.103173] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [128.103255] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [128.103337] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [128.103417] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [128.103498] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [128.103578] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [128.103668] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [128.103752] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [128.103835] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [128.105227] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.5.1

<6> [128.105229] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3

<7> [128.107084] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1350MHz, before = 1350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [128.107385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [128.108202] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads

<6> [128.108835] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled

<6> [128.108837] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled

<6> [128.109371] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled

<7> [128.112620] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping

<7> [128.112712] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping

<7> [128.112798] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [128.112890] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [128.113264] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [128.113327] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [128.113386] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [128.113443] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1

<7> [128.113500] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [128.117012] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY B bus for card0-DP-1

<7> [128.117658] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-1] generating connector hotplug event

<7> [128.117863] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:145:HDMI-A-1] generating connector hotplug event

<7> [128.118070] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY C bus for card0-DP-2

<7> [128.118481] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:151:DP-2] generating connector hotplug event

<7> [128.118686] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:157:HDMI-A-2] generating connector hotplug event

<7> [128.118882] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY D bus for card0-DP-3

<7> [128.119237] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:161:DP-3] generating connector hotplug event

<7> [128.119423] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:167:HDMI-A-3] generating connector hotplug event

<7> [128.119625] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY E bus for card0-DP-4

<7> [128.119989] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:171:DP-4] generating connector hotplug event

<7> [128.120175] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:177:HDMI-A-4] generating connector hotplug event

<6> [128.120202] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [128.121313] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 8 outputs detected

<6> [128.129822] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [128.132357] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10

<7> [128.133199] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [128.133490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5

<7> [128.133595] [drm:drm_client_modeset_probe]

<7> [128.133601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [128.133652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]

<7> [128.133673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]

<7> [128.133835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [128.133924] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [128.134016] i915 device info: pciid=0xa780 rev=0x04 platform=ALDERLAKE_S (subplatform=0x1) gen=12

<7> [128.134018] i915 device info: graphics version: 12

<7> [128.134019] i915 device info: media version: 12

<7> [128.134020] i915 device info: display version: 12

<7> [128.134021] i915 device info: graphics stepping: D0

<7> [128.134022] i915 device info: media stepping: D0

<7> [128.134023] i915 device info: display stepping: D0

<7> [128.134024] i915 device info: base die stepping: **

<7> [128.134025] i915 device info: gt: 0

<7> [128.134027] i915 device info: memory-regions: 0x21

<7> [128.134028] i915 device info: page-sizes: 0x211000

<7> [128.134029] i915 device info: platform: ALDERLAKE_S

<7> [128.134030] i915 device info: ppgtt-size: 48

<7> [128.134031] i915 device info: ppgtt-type: 2

<7> [128.134032] i915 device info: dma_mask_size: 39

<7> [128.134033] i915 device info: is_mobile: no

<7> [128.134034] i915 device info: is_lp: no

<7> [128.134035] i915 device info: require_force_probe: no

<7> [128.134036] i915 device info: is_dgfx: no

<7> [128.134037] i915 device info: has_64bit_reloc: yes

<7> [128.134038] i915 device info: has_64k_pages: no

<7> [128.134039] i915 device info: gpu_reset_clobbers_display: no

<7> [128.134040] i915 device info: has_reset_engine: yes

<7> [128.134041] i915 device info: has_3d_pipeline: yes

<7> [128.134042] i915 device info: has_4tile: no

<7> [128.134043] i915 device info: has_flat_ccs: no

<7> [128.134044] i915 device info: has_global_mocs: yes

<7> [128.134045] i915 device info: has_gmd_id: no

<7> [128.134046] i915 device info: has_gt_uc: yes

<7> [128.134047] i915 device info: has_heci_pxp: no

<7> [128.134048] i915 device info: has_heci_gscfi: no

<7> [128.134049] i915 device info: has_guc_deprivilege: no

<7> [128.134050] i915 device info: has_l3_ccs_read: no

<7> [128.133988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [128.134051] i915 device info: has_l3_dpf: no

<7> [128.134052] i915 device info: has_llc: yes

<7> [128.134053] i915 device info: has_logical_ring_contexts: yes

<7> [128.134054] i915 device info: has_logical_ring_elsq: yes

<7> [128.134054] i915 device info: has_media_ratio_mode: no

<7> [128.134055] i915 device info: has_mslice_steering: no

<7> [128.134056] i915 device info: has_oa_bpc_reporting: no

<7> [128.134057] i915 device info: has_oa_slice_contrib_limits: no

<7> [128.134058] i915 device info: has_oam: no

<7> [128.134059] i915 device info: has_one_eu_per_fuse_bit: no

<7> [128.134059] i915 device info: has_pxp: yes

<7> [128.134060] i915 device info: has_rc6: yes

<7> [128.134061] i915 device info: has_rc6p: no

<7> [128.134062] i915 device info: has_rps: yes

<7> [128.134063] i915 device info: has_runtime_pm: yes

<7> [128.134064] i915 device info: has_snoop: no

<7> [128.134065] i915 device info: has_coherent_ggtt: no

<7> [128.134065] i915 device info: tuning_thread_rr_after_dep: no

<7> [128.134066] i915 device info: unfenced_needs_alignment: no

<7> [128.134067] i915 device info: hws_needs_physical: no

<7> [128.134068] i915 device info: has_pooled_eu: no

<7> [128.134069] i915 device info: cursor_needs_physical: no

<7> [128.134069] i915 device info: has_cdclk_crawl: no

<7> [128.134070] i915 device info: has_cdclk_squash: no

<7> [128.134071] i915 device info: has_ddi: yes

<7> [128.134072] i915 device info: has_dp_mst: yes

<7> [128.134073] i915 device info: has_dsb: yes

<7> [128.134073] i915 device info: has_fpga_dbg: yes

<7> [128.134074] i915 device info: has_gmch: no

<7> [128.134075] i915 device info: has_hotplug: yes

<7> [128.134076] i915 device info: has_hti: yes

<7> [128.134077] i915 device info: has_ipc: yes

<7> [128.134077] i915 device info: has_overlay: no

<7> [128.134078] i915 device info: has_psr: yes

<7> [128.134079] i915 device info: has_psr_hw_tracking: no

<7> [128.134080] i915 device info: overlay_needs_physical: no

<7> [128.134081] i915 device info: supports_tv: no

<7> [128.134081] i915 device info: has_hdcp: yes

<7> [128.134082] i915 device info: has_dmc: yes

<7> [128.134083] i915 device info: has_dsc: yes

<7> [128.134084] i915 device info: rawclk rate: 19200 kHz

<7> [128.134085] i915 device info: iommu: enabled

<7> [128.134086] i915 device info: available engines: 41403

<7> [128.134087] i915 device info: slice total: 1, mask=0001

<7> [128.134088] i915 device info: subslice total: 2

<7> [128.134089] i915 device info: slice0: 2 subslices, mask=00000003

<7> [128.134090] i915 device info: EU total: 32

<7> [128.134091] i915 device info: EU per subslice: 16

<7> [128.134092] i915 device info: has slice power gating: yes

<7> [128.134093] i915 device info: has subslice power gating: no

<7> [128.134094] i915 device info: has EU power gating: no

<6> [128.134094] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [128.134095] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [128.134096] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [128.134143] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [128.134267] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [128.135499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [128.136698] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)

<7> [128.136839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] status updated from unknown to disconnected

<7> [128.136888] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected

<7> [128.136905] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]

<7> [128.136917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]

<7> [128.137916] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] status updated from unknown to disconnected

<7> [128.137931] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected

<7> [128.137941] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]

<7> [128.137950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]

<7> [128.139534] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] status updated from unknown to disconnected

<7> [128.139547] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected

<7> [128.139555] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]

<7> [128.139563] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]

<7> [128.140283] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] status updated from unknown to disconnected

<7> [128.140297] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected

<7> [128.140305] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]

<7> [128.140315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]

<7> [128.141483] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] status updated from unknown to disconnected

<7> [128.141494] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected

<7> [128.141501] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]

<7> [128.141509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]

<6> [128.142057] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100

<7> [128.142674] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] status updated from unknown to disconnected

<7> [128.142684] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected

<7> [128.142691] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]

<7> [128.142698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]

<7> [128.144276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] status updated from unknown to disconnected

<7> [128.144288] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected

<7> [128.144296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]

<7> [128.144304] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]

<7> [128.145066] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] status updated from unknown to disconnected

<7> [128.145077] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected

<7> [128.145084] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [128.145088] [drm:drm_client_modeset_probe] connector 134 enabled? no

<7> [128.145090] [drm:drm_client_modeset_probe] connector 145 enabled? no

<7> [128.145091] [drm:drm_client_modeset_probe] connector 151 enabled? no

<7> [128.145093] [drm:drm_client_modeset_probe] connector 157 enabled? no

<7> [128.145094] [drm:drm_client_modeset_probe] connector 161 enabled? no

<7> [128.145095] [drm:drm_client_modeset_probe] connector 167 enabled? no

<7> [128.145097] [drm:drm_client_modeset_probe] connector 171 enabled? no

<7> [128.145098] [drm:drm_client_modeset_probe] connector 177 enabled? no

<7> [128.145120] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [128.145126] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [128.145151] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [128.145165] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [128.145440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [128.146240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [128.147494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.147631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [128.147758] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.148153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [128.148260] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.148361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [128.148462] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.148566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [128.149097] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.149208] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [128.149410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [128.149507] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [128.149597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [128.150869] [drm:drm_client_modeset_probe]

<7> [128.150912] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]

<6> [128.150888] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [128.150933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]

<7> [128.150997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [128.151995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [128.153281] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.153392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [128.153498] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.153601] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [128.153716] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.153816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [128.153966] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.154068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [128.154167] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.154265] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.

<7> [128.154350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [128.154440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [128.154635] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected

<7> [128.154601] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [128.154651] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]

<7> [128.154664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]

<7> [128.154826] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected

<7> [128.154839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]

<7> [128.154851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]

<7> [128.155006] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected

<7> [128.155018] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]

<7> [128.155030] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]

<7> [128.155182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected

<7> [128.155194] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]

<7> [128.155206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]

<7> [128.155353] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected

<7> [128.155365] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]

<7> [128.155377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]

<7> [128.155528] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected

<7> [128.155540] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]

<7> [128.155551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]

<7> [128.155707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected

<7> [128.155720] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]

<7> [128.155732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]

<7> [128.155880] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected

<7> [128.155892] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [128.155899] [drm:drm_client_modeset_probe] connector 134 enabled? no

<7> [128.155901] [drm:drm_client_modeset_probe] connector 145 enabled? no

<7> [128.155904] [drm:drm_client_modeset_probe] connector 151 enabled? no

<7> [128.155906] [drm:drm_client_modeset_probe] connector 157 enabled? no

<7> [128.155908] [drm:drm_client_modeset_probe] connector 161 enabled? no

<7> [128.155911] [drm:drm_client_modeset_probe] connector 167 enabled? no

<7> [128.155913] [drm:drm_client_modeset_probe] connector 171 enabled? no

<7> [128.155915] [drm:drm_client_modeset_probe] connector 177 enabled? no

<7> [128.155939] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [128.155948] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [128.155962] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [128.155978] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [128.156029] [drm:drm_client_modeset_probe]

<7> [128.156062] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]

<7> [128.156075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]

<7> [128.156233] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected

<7> [128.156245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]

<7> [128.156257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]

<7> [128.156409] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected

<7> [128.156422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]

<7> [128.156434] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]

<7> [128.156583] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected

<7> [128.156595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]

<7> [128.156616] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]

<7> [128.156766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected

<7> [128.156779] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]

<7> [128.156790] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]

<7> [128.156932] [IGT] core_hotunplug: reopening DRM device for health check

<7> [128.156940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected

<7> [128.156953] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]

<7> [128.156961] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [128.156965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]

<7> [128.157109] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected

<7> [128.157122] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]

<7> [128.157133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]

<7> [128.157274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected

<7> [128.157286] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]

<7> [128.157325] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [128.157298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]

<7> [128.157442] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected

<7> [128.157454] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [128.157457] [drm:drm_client_modeset_probe] connector 134 enabled? no

<7> [128.157459] [drm:drm_client_modeset_probe] connector 145 enabled? no

<7> [128.157461] [drm:drm_client_modeset_probe] connector 151 enabled? no

<7> [128.157464] [drm:drm_client_modeset_probe] connector 157 enabled? no

<7> [128.157466] [drm:drm_client_modeset_probe] connector 161 enabled? no

<7> [128.157468] [drm:drm_client_modeset_probe] connector 167 enabled? no

<7> [128.157470] [drm:drm_client_modeset_probe] connector 171 enabled? no

<7> [128.157472] [drm:drm_client_modeset_probe] connector 177 enabled? no

<7> [128.157491] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [128.157499] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [128.157513] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [128.157529] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [128.159048] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [128.159246] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [128.159558] [IGT] core_hotunplug: closing health checked device instance

<7> [128.159758] [IGT] core_hotunplug: reopening render device for health check

<7> [128.159779] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [128.160132] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [128.161539] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [128.161791] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [128.162088] [IGT] core_hotunplug: closing health checked device instance

<6> [128.162255] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS

<6> [128.162694] [IGT] core_hotunplug: exiting, ret=0

<6> [128.175660] snd_hda_codec_realtek hdaudioC0D0: ALC711: SKU not ready 0x00000000

<6> [128.176181] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC711: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp

<6> [128.176184] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

<6> [128.176185] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)

<6> [128.176186] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

<6> [128.176187] snd_hda_codec_realtek hdaudioC0D0: inputs:

<6> [128.176189] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13

<6> [128.176190] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19

<6> [128.176191] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12

Results for igt@core_hotunplug@unbind-rebind