Results for igt@i915_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gfaa966f69 (x86_64) (Linux: 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ x86_64)
Out	Starting subtest: basic-rte Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 Wakeref count: 0 Subtest basic-rte: SUCCESS (1.549s) i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_wakeref_get_first+0x39/0xc0 [i915] intel_gt_pm_debugfs_forcewake_user_open+0x67/0x70 [i915] i915_forcewake_open+0x1d/0x40 [i915] full_proxy_open+0x160/0x1e0 do_dentry_open+0x162/0x570 path_openat+0x666/0x8b0 do_filp_open+0xb1/0x120 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x38/0x120 [i915] __gt_park+0x15e/0x220 [i915] ____intel_wakeref_put_last+0x1f/0x70 [i915] intel_gt_pm_debugfs_forcewake_user_release+0x76/0x80 [i915] i915_forcewake_release+0x1d/0x40 [i915] full_proxy_release+0x3c/0xb0 __fput+0xfb/0x2a0
Err	Starting subtest: basic-rte Subtest basic-rte: SUCCESS (1.549s)
Dmesg	<6> [117.728179] Console: switching to colour dummy device 80x25 <6> [117.728219] [IGT] i915_pm_rpm: executing <6> [117.730600] [IGT] i915_pm_rpm: starting subtest basic-rte <7> [117.730646] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [117.731186] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [117.731204] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [117.731375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.731771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.731922] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [117.732051] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [117.732065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [117.732201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.732546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.732701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [117.732771] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [117.732781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [117.732930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.733297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.733414] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [117.733468] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [117.733478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [117.733577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.733898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.734030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [117.739455] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [117.739468] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [117.739582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.739897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.740028] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [117.740390] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [117.740401] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [117.740504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.740823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.740935] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [117.741304] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [117.741314] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [117.741409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.741728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.741843] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [117.742210] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [117.742220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [117.742319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.742638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.742749] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [117.743230] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [117.743239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [117.743340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.743649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.743761] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [117.743781] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [117.743790] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [117.743883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.744210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.744320] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [117.744340] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [117.744349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [117.744446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.744766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.744878] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [117.744897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [117.744907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [117.745014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [117.745339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [117.745451] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [118.746380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [118.750227] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [118.751494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.751655] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.751793] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.751923] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.752059] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.752271] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [118.752511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [118.752669] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.752824] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [118.752934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [118.753090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [118.778143] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [118.778487] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [118.779081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [118.779753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [118.780568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [118.781142] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [118.781606] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [118.782272] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [118.786364] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [118.786574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [118.789762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [118.790377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [118.790737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [118.790815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.791290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.791742] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [118.791757] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [118.791863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.791961] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [118.792016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.792138] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6 <7> [118.792283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.792440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [118.792748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.792919] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.793088] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.793243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.793395] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.793546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [118.793688] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [118.793821] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [118.794366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.794540] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [118.794932] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [118.795823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.795969] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.796111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.796282] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [118.796240] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.796366] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.796568] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [118.796807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [118.796958] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.797126] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [118.797239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [118.797380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [118.822213] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [118.822327] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [118.822512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [118.822711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [118.823109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [118.823347] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [118.823536] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [118.823793] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [118.825699] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [118.825834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [118.828926] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [118.829508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [118.829597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.829715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [118.829997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.830135] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.830266] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.830392] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.830517] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.830640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [118.830756] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [118.830865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [118.831298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.831422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [118.831877] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [118.832422] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [118.832480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.832875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.833010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.833137] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.833265] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.833465] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [118.833658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [118.833789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [118.833939] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.834102] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [118.834215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [118.834354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [118.859127] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [118.859213] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [118.859355] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [118.859518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [118.859845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [118.860037] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [118.860176] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [118.860396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [118.862161] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [118.862271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [118.865392] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [118.865976] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [118.866070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.866438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.866564] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [118.866582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [118.866687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.867019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.867138] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [118.867156] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [118.867262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.867575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.867694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [118.867813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.867968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [118.868290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.868461] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.868621] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.868771] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.868918] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.869076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [118.869224] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [118.869359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [118.869806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.870098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [118.870507] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [118.871103] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [118.871110] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [118.871419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.871586] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.871739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.871886] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.872037] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.872274] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [118.872539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [118.872714] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.872892] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [118.873034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [118.873311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [118.898104] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [118.898177] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [118.898288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [118.898415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [118.898696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [118.898849] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [118.898954] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [118.899232] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [118.900883] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [118.900993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [118.904125] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [118.904707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [118.904768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.905106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.905230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6 <7> [118.905245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [118.905350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.905674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.905795] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [118.905907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.906076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [118.906386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.906553] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.906709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.906857] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.907008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.907149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [118.907289] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [118.907419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [118.907864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.908013] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [118.908522] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [118.909373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [118.909439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.909605] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.909768] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.909925] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.910073] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.910306] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [118.910578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [118.910754] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.910932] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [118.911072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [118.911231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [118.935934] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [118.936021] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [118.936149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [118.936281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [118.936563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [118.936721] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [118.936829] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [118.937038] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [118.938681] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [118.938792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [118.941872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [118.942444] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [118.942515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.942894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.943026] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [118.943046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [118.943151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.943464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.943585] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [118.943598] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [118.943703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.944032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.944148] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6 <7> [118.944160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [118.944265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.944592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.944711] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [118.944722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [118.944823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [118.945150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [118.945266] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [118.945279] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [118.945771] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [118.946656] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [118.946799] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.946930] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [118.947065] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.947188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [118.947393] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [118.947627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [118.947779] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [118.947934] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [118.948053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [118.948190] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [119.010407] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [119.023379] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [119.023917] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [119.024881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [119.025775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [119.026990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [119.027929] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [119.028688] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [119.028949] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [119.030655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.030786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.033885] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [119.034532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [119.034690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.034836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.035152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.035322] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.035477] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.035623] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.035765] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.035904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.036046] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.036174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.036616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.036756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [119.037288] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [119.037838] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [119.038184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.038345] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.038495] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.038638] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.038778] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.039015] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [119.039284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [119.039457] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.039632] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [119.039762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [119.039919] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [119.064769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [119.064954] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [119.065263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [119.065556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [119.066061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [119.066325] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [119.066499] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [119.066875] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [119.068799] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.068922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.072018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [119.072596] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [119.072678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.072774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.073058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.073204] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.073335] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.073462] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.073585] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.073704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.073823] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.073934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.074368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.074489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [119.074953] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [119.075489] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [119.075554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.075559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [119.075950] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.076094] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.076221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.076348] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.076550] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [119.076784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [119.076935] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.077099] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [119.077209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [119.077347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [119.102188] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [119.102306] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [119.102503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [119.102712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [119.103140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [119.103383] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [119.103573] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [119.103842] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [119.105693] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.105823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.108926] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [119.109529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [119.109630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.109961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.110117] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [119.110137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [119.110280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.110610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.110747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6 <7> [119.110869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.111038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.111348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.111517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.111673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.111821] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.111965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.112114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.112255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.112386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.112830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.112973] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [119.113488] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [119.114037] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [119.114069] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [119.114404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.114567] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.114718] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.114863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.115013] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.115260] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [119.115523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [119.115697] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.115873] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [119.116016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [119.116175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [119.140918] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [119.141031] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [119.141184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [119.141350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [119.141695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [119.141886] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [119.142039] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [119.142263] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [119.144104] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.144235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.147355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [119.147973] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [119.148083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.148444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.148591] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [119.148701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.148854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.149173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.149347] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.149508] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.149660] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.149807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.149948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.150098] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.150231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.150680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.150826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [119.151358] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [119.152250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.152377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [119.152419] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.152573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.152719] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.152863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.153106] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [119.153377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [119.153552] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.153729] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [119.153862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [119.154030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [119.178841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [119.178960] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [119.179175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [119.179387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [119.179785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [119.180030] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [119.180210] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [119.180502] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [119.182281] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.182413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.185523] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [119.186169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [119.186274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.186634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.186778] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [119.186806] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [119.186937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.187280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.187419] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [119.187435] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [119.187563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.187905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.188051] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6 <7> [119.188066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [119.188199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.188547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.188682] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [119.188697] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [119.188823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.189178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.189314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [119.189331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [119.189792] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [119.190690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.190851] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.191010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.191156] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.191298] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.191528] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [119.191791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [119.191963] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.192159] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [119.192290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [119.192447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [119.266165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [119.266702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [119.267633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [119.268512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [119.269630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [119.270565] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [119.271412] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [119.271824] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [119.273527] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.273656] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.276913] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [119.277549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [119.277880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [119.278418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.278772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.278918] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [119.278936] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [119.278971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.279437] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6 <7> [119.279452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [119.279631] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [119.279649] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [119.280044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1 <6> [119.280101] [IGT] i915_pm_rpm: finished subtest basic-rte, SUCCESS <7> [119.280122] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [119.280202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.280502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.280653] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.280791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.280922] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.281064] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.281187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.281304] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.281413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.281567] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [119.281635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.281916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.282068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.282200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.282325] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.282448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.282565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.282678] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.282790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.283253] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [119.283319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.283734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.283872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.284007] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.284136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.284263] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.284380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.284495] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.284604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.285065] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [119.285128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.285548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.285686] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.285815] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.285941] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.286084] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.286206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.286324] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.286432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.387404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.389913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [119.391223] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [119.392766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.393118] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.393280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.393428] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.393573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.393806] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [119.394146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [119.394331] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.394521] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [119.394656] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [119.394819] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [119.503666] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [119.504559] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [119.505655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [119.506579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [119.507757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [119.508685] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [119.509475] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [119.510790] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [119.512456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.512574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.516131] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [119.516811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [119.517026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.517178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.517482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.517626] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.517755] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.517880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.518015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.518147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.518262] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.518369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.518790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.519130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [119.519232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.519540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.519652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1 <7> [119.519666] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [119.519762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <6> [119.520063] [IGT] i915_pm_rpm: exiting, ret=0 <7> [119.520087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.520202] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6 <7> [119.520214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [119.520310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.520632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.520743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1 <7> [119.520754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [119.520850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.521179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.521294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1 <7> [119.521532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.521686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.521990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.522543] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.522697] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.522831] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.522959] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.523113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.523232] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.523342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.523769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <6> [119.524017] Console: switching to colour frame buffer device 128x48 <7> [119.524343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.524465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [119.524747] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.524894] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.525034] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [119.525163] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [119.525288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [119.525417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [119.525539] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.525651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.526084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

Created at 2023-07-17 00:31:03