igt@i915_pm_rpm@basic-rte on shard-tglu@linus-v6.5-rc1 Test details

Detail	Value
Hostname	shard-tglu-6
Igt-Version	IGT-Version: 1.27.1-gd1574543b (x86_64) (Linux: 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ x86_64)
Out	Starting subtest: basic-rte Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_client_modeset_commit_atomic+0x234/0x280 drm_client_modeset_commit_locked+0x56/0x190 drm_client_modeset_commit+0x23/0x50 __drm_fb_helper_restore_fbdev_mode_unlocked+0x99/0xd0 [drm_kms_helper] intel_fbdev_restore_mode+0x2f/0x60 [i915] Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_mode_atomic_ioctl+0x8b0/0xa60 drm_ioctl_kernel+0xb4/0x150 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x38/0x120 [i915] hsw_get_pipe_config+0x150/0xb30 [i915] intel_crtc_get_pipe_config+0x1f/0x50 [i915] intel_modeset_verify_crtc+0xc7/0x4e0 [i915] intel_atomic_commit_tail+0x7b5/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_digital_port_connected+0x2e/0x80 [i915] intel_dp_detect+0x27f/0x640 [i915] drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 0 Stack trace: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1971 __igt_fail_assert() #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2405 __igt_unique____real_main2402() #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2402 main() #3 [__libc_start_main+0xf3] #4 [_start+0x2e] Subtest basic-rte: FAIL (12.396s) i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 Wakeref count: 0 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_digital_port_connected+0x2e/0x80 [i915] intel_dp_detect+0x27f/0x640 [i915] drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 0 Test requirement not met in function __igt_unique____real_main2402, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2413: Test requirement: setup_environment(true)
Err	Starting subtest: basic-rte (i915_pm_rpm:2487) igt_pm-WARNING: timeout: pm_status expected:suspended, got:suspending (i915_pm_rpm:2487) CRITICAL: Test assertion failure function basic_subtest, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1125: (i915_pm_rpm:2487) CRITICAL: Failed assertion: wait_for_suspended() Subtest basic-rte failed. ** DEBUG (i915_pm_rpm:2487) drmtest-INFO: Opened device: /dev/dri/card0 (i915_pm_rpm:2487) DEBUG: Test requirement passed: drm_fd != -1 (i915_pm_rpm:2487) DEBUG: Test requirement passed: debugfs != -1 (i915_pm_rpm:2487) igt_kms-DEBUG: VT: graphics mode set (mode was 0x1) (i915_pm_rpm:2487) igt_kms-DEBUG: display: init { (i915_pm_rpm:2487) igt_chamelium-DEBUG: No configuration file available for chamelium (i915_pm_rpm:2487) igt_kms-DEBUG: display: HDMI-A-1: Selecting pipe None (i915_pm_rpm:2487) igt_kms-DEBUG: display: DP-1: Selecting pipe None (i915_pm_rpm:2487) igt_kms-DEBUG: display: DP-1: Selecting pipe None (i915_pm_rpm:2487) igt_kms-DEBUG: display: DP-2: Selecting pipe None (i915_pm_rpm:2487) igt_kms-DEBUG: display: DP-2: Selecting pipe None (i915_pm_rpm:2487) igt_kms-DEBUG: display: DP-3: Selecting pipe None (i915_pm_rpm:2487) igt_kms-DEBUG: display: DP-3: Selecting pipe None (i915_pm_rpm:2487) igt_kms-DEBUG: display: DP-4: Selecting pipe None (i915_pm_rpm:2487) igt_kms-DEBUG: display: DP-4: Selecting pipe None (i915_pm_rpm:2487) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:2487) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:2487) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:2487) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:2487) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:2487) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:2487) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:2487) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:2487) igt_kms-DEBUG: display: } (i915_pm_rpm:2487) igt_pm-DEBUG: Test requirement passed: fd >= 0 (i915_pm_rpm:2487) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1080, format=XR24(0x34325258), modifier=0x0, size=0) (i915_pm_rpm:2487) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=7680) (i915_pm_rpm:2487) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd) (i915_pm_rpm:2487) intel_blt-DEBUG: Test requirement passed: cmds_info (i915_pm_rpm:2487) intel_blt-DEBUG: Test requirement passed: cmds_info (i915_pm_rpm:2487) igt_fb-DEBUG: Test requirement passed: cairo_surface_status(fb->cairo_surface) == CAIRO_STATUS_SUCCESS (i915_pm_rpm:2487) igt_pm-DEBUG: Test requirement passed: fd >= 0 (i915_pm_rpm:2487) igt_pm-DEBUG: Audio device path is /sys/class/sound/hwC0D2/device/device/power/control (i915_pm_rpm:2487) igt_pm-DEBUG: Saved audio power management as '0' and 'auto' (i915_pm_rpm:2487) igt_pm-DEBUG: Saved runtime power management as '10000' and 'auto' (i915_pm_rpm:2487) INFO: Runtime PM support: 1 (i915_pm_rpm:2487) INFO: PC8 residency support: 0 (i915_pm_rpm:2487) DEBUG: Test requirement passed: has_runtime_pm (i915_pm_rpm:2487) igt_pm-INFO: DMC: fw loaded: yes (i915_pm_rpm:2487) DEBUG: Test requirement passed: igt_pm_dmc_loaded(debugfs) (i915_pm_rpm:2487) INFO: i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_client_modeset_commit_atomic+0x234/0x280 drm_client_modeset_commit_locked+0x56/0x190 drm_client_modeset_commit+0x23/0x50 __drm_fb_helper_restore_fbdev_mode_unlocked+0x99/0xd0 [drm_kms_helper] intel_fbdev_restore_mode+0x2f/0x60 [i915] Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_mode_atomic_ioctl+0x8b0/0xa60 drm_ioctl_kernel+0xb4/0x150 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x38/0x120 [i915] hsw_get_pipe_config+0x150/0xb30 [i915] intel_crtc_get_pipe_config+0x1f/0x50 [i915] intel_modeset_verify_crtc+0xc7/0x4e0 [i915] intel_atomic_commit_tail+0x7b5/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 (i915_pm_rpm:2487) igt_pm-DEBUG: (status = __igt_get_runtime_pm_status(fd)) == expected took 286ms (i915_pm_rpm:2487) igt_pm-WARNING: timeout: pm_status expected:suspended, got:suspending (i915_pm_rpm:2487) igt_debugfs-INFO: i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_digital_port_connected+0x2e/0x80 [i915] intel_dp_detect+0x27f/0x640 [i915] drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 0 (i915_pm_rpm:2487) CRITICAL: Test assertion failure function basic_subtest, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1125: (i915_pm_rpm:2487) CRITICAL: Failed assertion: wait_for_suspended() (i915_pm_rpm:2487) igt_core-INFO: Stack trace: (i915_pm_rpm:2487) igt_core-INFO: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1971 __igt_fail_assert() (i915_pm_rpm:2487) igt_core-INFO: #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2405 __igt_unique____real_main2402() (i915_pm_rpm:2487) igt_core-INFO: #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2402 main() (i915_pm_rpm:2487) igt_core-INFO: #3 [__libc_start_main+0xf3] (i915_pm_rpm:2487) igt_core-INFO: #4 [_start+0x2e] END ** Subtest basic-rte: FAIL (12.396s) (i915_pm_rpm:2487) igt_pm-WARNING: timeout: pm_status expected:suspended, got:suspending
Dmesg	<6> [422.715313] Console: switching to colour dummy device 80x25 <6> [422.715603] [IGT] i915_pm_rpm: executing <6> [422.717857] [IGT] i915_pm_rpm: starting subtest basic-rte <7> [422.717918] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [422.718400] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] <7> [422.718425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [422.745724] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [422.745734] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [422.745737] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [422.745739] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [422.745743] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [422.745747] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [422.745750] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [422.745764] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [422.746344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [422.746473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [422.747055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [422.747164] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [422.747790] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] probed modes : <7> [422.747805] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [422.747810] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.747813] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.747815] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.747818] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.747821] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.747823] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.747826] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.747829] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.747834] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [422.747838] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [422.747840] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [422.747843] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa <7> [422.747845] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6 <7> [422.747848] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6 <7> [422.747850] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa <7> [422.747852] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6 <7> [422.747855] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [422.747857] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [422.747860] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6 <7> [422.747862] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 <7> [422.747865] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa <7> [422.747867] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6 <7> [422.747870] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6 <7> [422.747872] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6 <7> [422.747874] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6 <7> [422.747877] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5 <7> [422.747879] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [422.747882] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6 <7> [422.747884] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 <7> [422.747886] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [422.747889] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [422.747891] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6 <7> [422.747894] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [422.747896] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [422.747898] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [422.747901] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [422.747903] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [422.747906] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [422.747908] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6 <7> [422.747911] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [422.747913] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 <7> [422.747915] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 <7> [422.747918] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 <7> [422.747920] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [422.747923] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [422.747925] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [422.747928] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 <7> [422.747930] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 <7> [422.747933] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [422.747935] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [422.747938] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 <7> [422.747940] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 <7> [422.747942] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [422.747945] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [422.747947] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6 <7> [422.747950] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 <7> [422.747952] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [422.747955] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [422.747957] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa <7> [422.747959] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [422.747962] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 <7> [422.747964] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [422.747967] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [422.747969] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 <7> [422.747972] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [422.747974] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [422.747976] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [422.747979] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [422.747981] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa <7> [422.747984] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [422.747986] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [422.747988] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [422.748127] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] <7> [422.748139] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [422.748289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.748423] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.748591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.748733] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.748863] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected <7> [422.748957] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] <7> [422.748969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [422.749087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.749222] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.749447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.749579] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.749711] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected <7> [422.749800] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] <7> [422.749812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [422.749928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.750063] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.750368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.750503] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.750625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected <7> [422.750723] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] <7> [422.750735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [422.750851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.750991] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.751294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.751423] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.751546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected <7> [422.761943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] <7> [422.761959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [422.762100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.762230] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.762526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.762646] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.762780] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected <7> [422.763409] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] <7> [422.763422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [422.763545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.763689] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.763912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.764032] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.764153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected <7> [422.764676] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] <7> [422.764698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [422.764815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.764950] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.765162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.765304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.765427] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected <7> [422.765964] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] <7> [422.765976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [422.766094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.766229] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.766447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.766576] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.766706] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected <7> [422.767425] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] <7> [422.767441] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [422.794398] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [422.794407] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [422.794410] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [422.794413] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [422.794416] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [422.794419] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [422.794422] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [422.794426] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [422.795070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [422.795185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [422.795854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [422.795959] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [422.796551] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] probed modes : <7> [422.796564] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [422.796569] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.796572] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.796575] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.796578] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.796581] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.796584] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.796587] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.796589] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [422.796592] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [422.796595] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [422.796598] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [422.796601] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa <7> [422.796604] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6 <7> [422.796607] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6 <7> [422.796609] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa <7> [422.796612] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6 <7> [422.796615] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [422.796618] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [422.796621] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6 <7> [422.796624] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 <7> [422.796627] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa <7> [422.796629] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6 <7> [422.796632] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6 <7> [422.796635] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6 <7> [422.796638] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6 <7> [422.796640] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5 <7> [422.796643] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [422.796646] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6 <7> [422.796648] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 <7> [422.796651] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [422.796654] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [422.796656] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6 <7> [422.796659] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [422.796662] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [422.796664] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [422.796667] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [422.796670] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [422.796673] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [422.796675] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6 <7> [422.796686] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [422.796689] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 <7> [422.796692] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 <7> [422.796694] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 <7> [422.796697] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [422.796700] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [422.796703] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [422.796705] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 <7> [422.796708] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 <7> [422.796711] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [422.796714] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [422.796716] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 <7> [422.796719] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 <7> [422.796722] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [422.796724] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [422.796727] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6 <7> [422.796730] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 <7> [422.796733] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [422.796736] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [422.796738] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa <7> [422.796741] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [422.796744] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 <7> [422.796747] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [422.796750] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [422.796752] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 <7> [422.796755] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [422.796758] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [422.796761] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [422.796763] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [422.796766] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa <7> [422.796769] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [422.796772] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [422.796775] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [422.796824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] <7> [422.796837] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [422.796957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.797094] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.797316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.797447] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.797574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected <7> [422.797600] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] <7> [422.797612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [422.797737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.797873] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.798097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.798231] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.798353] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected <7> [422.798378] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] <7> [422.798390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [422.798508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.798642] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.798872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.799003] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.799125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected <7> [422.799149] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] <7> [422.799160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [422.799272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [422.799411] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [422.799635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [422.799779] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [422.799901] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected <7> [422.800098] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:356] <7> [423.823886] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [423.824107] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [423.824533] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [423.824957] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [423.825334] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [423.825727] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [423.826103] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [423.826481] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [423.826870] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [423.827234] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [423.827591] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [423.827965] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [423.828336] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [423.828721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [423.829089] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [423.829283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [423.829406] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [423.829528] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [423.829654] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [423.829791] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [423.829918] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [423.830034] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [423.830146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [423.830256] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [423.830380] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [423.830506] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [423.830632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [423.830762] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [423.830886] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [423.831006] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [423.831126] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [423.831249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [423.831368] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [423.831493] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [423.831619] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [423.831750] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no) <7> [423.831874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no) <7> [423.831997] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [423.832117] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [423.832119] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [423.832120] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [423.832122] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [423.832123] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [423.832125] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [423.832126] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [423.832128] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [423.832130] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [423.832250] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [423.832369] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [423.832488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0) <7> [423.832613] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000) <7> [423.832758] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [423.832884] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [423.833006] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [423.833008] i915 0000:00:02.0: colorspace: RGB <7> [423.833010] i915 0000:00:02.0: scan mode: Underscan <7> [423.833012] i915 0000:00:02.0: colorimetry: No Data <7> [423.833014] i915 0000:00:02.0: picture aspect: No Data <7> [423.833016] i915 0000:00:02.0: active aspect: Same as Picture <7> [423.833017] i915 0000:00:02.0: itc: No Data <7> [423.833019] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [423.833021] i915 0000:00:02.0: quantization range: Full <7> [423.833023] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [423.833025] i915 0000:00:02.0: video code: 0 <7> [423.833026] i915 0000:00:02.0: ycc quantization range: Full <7> [423.833028] i915 0000:00:02.0: hdmi content type: Graphics <7> [423.833029] i915 0000:00:02.0: pixel repeat: 0 <7> [423.833031] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [423.833033] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [423.833154] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [423.833276] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [423.833397] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [423.833399] i915 0000:00:02.0: vendor: Intel <7> [423.833400] i915 0000:00:02.0: product: Integrated gfx <7> [423.833402] i915 0000:00:02.0: source device information: PC General (0x9) <7> [423.833404] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [423.833525] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [423.833644] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [423.833773] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [423.833776] i915 0000:00:02.0: empty frame <7> [423.833777] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [423.833898] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [423.834024] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0 <7> [423.834181] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [423.834299] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [423.834445] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [423.834556] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [423.834674] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [423.834819] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [423.834934] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [423.835047] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [423.835160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0 <7> [423.835289] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [423.835433] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [423.835559] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [423.835690] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [423.835817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset] <7> [423.835947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [423.836074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [423.836199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [423.836322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [423.836443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [423.836564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [423.836692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [423.836815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [423.842349] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A] <7> [423.857803] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [423.857968] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [423.858520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [423.858633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [423.859221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [423.859329] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [423.859341] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [423.859490] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [423.867766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [423.867933] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A] <7> [423.868077] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [423.868215] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [423.868343] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [423.868553] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [423.868696] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [423.868815] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [423.868932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [423.869048] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [423.869166] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [423.869283] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [423.869397] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [423.869510] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [423.869621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [423.869742] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [423.869855] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [423.869965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [423.870074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [423.870183] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [423.870293] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [423.870410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [423.870523] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [423.870636] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [423.870755] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [423.870869] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [423.870981] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [423.871103] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [423.871234] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [423.871363] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [423.871489] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [423.871613] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [423.871744] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [423.871867] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [423.871990] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [423.872109] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [423.872244] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [423.872404] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [423.872565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [423.872715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [423.872848] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0) <7> [423.872983] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [423.873194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [423.873323] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [423.873443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [423.874714] [drm:drm_mode_setcrtc] [CRTC:167:pipe B] <7> [423.874874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [423.875751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [423.876923] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [423.877068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [423.877208] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [423.877364] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [423.877536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [423.877664] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [423.877807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [423.879026] [drm:drm_mode_setcrtc] [CRTC:236:pipe C] <7> [423.879136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [423.880127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [423.881290] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [423.881432] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [423.881570] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [423.881711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [423.881850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [423.881981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [423.882104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [423.883312] [drm:drm_mode_setcrtc] [CRTC:305:pipe D] <7> [423.883401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [423.884413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [423.885579] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [423.885727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [423.885868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [423.886005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [423.886143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [423.886275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [423.886398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [423.888865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [423.889555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [423.890736] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [423.890898] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [423.891039] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [423.891177] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [423.891302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [423.891427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [423.891569] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810 <7> [423.903555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [423.903742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [423.903876] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0) <7> [423.903989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [423.904106] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [423.904217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.082868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.083316] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.094310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.095524] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.096128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.096619] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.097127] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.097649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.098269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.100268] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.100630] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.101030] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.101337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.104350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.189319] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [424.201901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.206767] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.207159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.207559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.208258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.208622] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.208996] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.209726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.211504] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.211904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.232648] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.232801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.232923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [424.233788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.234951] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.235095] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.235232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.235370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.235505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [424.235636] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.235771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.236946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.237084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.237773] [drm:drm_mode_setcrtc] [CRTC:167:pipe B] <7> [424.243769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.244952] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.245091] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.245229] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.245370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.245529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.245766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.247323] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.247482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.247647] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.247781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.249262] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.273933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.276736] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.277100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.277463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.278200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.278729] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.279224] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.279833] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.281554] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.282062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.298325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.298507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.298665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [424.299370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.300556] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.300772] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.300953] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.301120] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.301269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [424.301401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.301528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.302704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.302909] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.303768] [drm:drm_mode_setcrtc] [CRTC:236:pipe C] <7> [424.303768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [424.308408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.309556] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.309745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.309885] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.310022] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.310182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.310435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.312046] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.312194] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.312352] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.312464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.314069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.338755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.341537] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.341952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.342348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.343194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.343580] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.344100] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.344636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.346654] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.347052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.365515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.365597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.393823] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [424.393833] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [424.393837] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [424.393840] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [424.393843] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [424.393847] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [424.393850] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [424.393854] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [424.394410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [424.394515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [424.395054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [424.395201] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [424.395218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.395360] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.403440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.404599] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.404773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.404912] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.405050] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.405213] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.405398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [424.405443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [424.405584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.407151] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.407319] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.407490] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.407618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.409121] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.433712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.436446] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.436774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.437106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.437729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.438114] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.438407] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.438919] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.440535] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.440867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.458222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.458328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.458452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [424.458579] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [424.459394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [424.459541] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [424.459662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.459837] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.466188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.467338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.467506] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.467648] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.467793] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.467973] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.468179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.468334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [424.469717] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.469883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.470041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.470152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.471616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.496253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.500799] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.501177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.501550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.502298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.502644] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.502996] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.503459] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.505170] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.505514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.521786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.521916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.522029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [424.522841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.524003] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.524147] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.524289] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.524426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.524563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [424.524704] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.524829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.526006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.526143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.527568] [drm:drm_mode_setcrtc] [CRTC:305:pipe D] <7> [424.531710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.532862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.533005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.533146] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.533283] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.533444] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.533674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.535253] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.535409] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.535575] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.535704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.537178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.561852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.564705] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.564932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.565275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.565995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.566325] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.566630] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.567127] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.568794] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.569100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.585318] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.585440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.585554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [424.586375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.587558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.587721] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.587852] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.587976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.588100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [424.588216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.588326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.589487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.589658] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.590529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [424.596321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.597505] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.597674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.597834] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.597998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.598160] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.598385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.599709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.599876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.600032] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.600144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.601690] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.626308] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.628164] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.628450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.628850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.629588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.629962] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.630294] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.630768] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.632388] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.632697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.649962] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.650071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.650207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [424.650347] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [424.651205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [424.651336] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [424.651457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.651598] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.657943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.659081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.659228] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.659367] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.659505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.659663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.659858] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [424.659882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [424.660016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.661574] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.661757] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.661923] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.662052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.664740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.689245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.693819] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.694193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.694570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.695296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.695645] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.695997] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.696541] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.698519] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.698897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.717353] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.717438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.717560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [424.717694] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [424.718590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [424.718736] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [424.718891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.719039] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.725376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.726517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.726685] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.726840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.726981] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.727141] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.727318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [424.727341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [424.727474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.728718] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.728885] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.729045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.729157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.730622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.755200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.757751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.758021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.758297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.759050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.759402] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.759774] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.760357] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.762123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.762441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.782030] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.782130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.782249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [424.782372] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [424.783297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [424.783464] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [424.783584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.783741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.788980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.790111] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.790273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.790414] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.790552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.790731] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.790933] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [424.790976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.791171] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [424.792608] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.792779] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.792950] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.793073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.794550] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.819165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.823773] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.824147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.824520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.825340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.825757] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.826161] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.826636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.828424] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.828786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.847305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.847389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.875975] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [424.875985] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [424.875989] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [424.875992] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [424.875995] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [424.875998] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [424.876001] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [424.876004] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [424.876568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [424.876687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [424.877351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [424.877464] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [424.877482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.877624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.886206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.887361] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.887527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.887669] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.887823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.888008] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.888188] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [424.888212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [424.888351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.889707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.889862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.890018] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.890130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.891603] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.916202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.918798] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.919191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.919590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.920419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.920815] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.921174] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.921629] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.923433] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.923736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [424.941069] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [424.941175] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [424.941307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [424.941442] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [424.942250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [424.942396] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [424.942518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [424.942663] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [424.948997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [424.950162] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.950329] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [424.950469] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.950605] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [424.950774] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [424.950985] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [424.951009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [424.951155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [424.952718] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [424.952880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [424.953050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [424.953174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [424.954655] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [424.979189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [424.983773] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [424.984166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [424.984561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [424.985307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [424.985706] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [424.986106] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [424.986602] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [424.988463] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [424.988798] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.006073] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.006180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.006304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.006428] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.007341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.007486] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.007609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.007769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.014132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.015297] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.015457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.015598] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.015751] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.015931] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.016124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [425.016146] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [425.016289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.017718] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.017881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.018055] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.018182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.019666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.044271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.046747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.047022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.047317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.048098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.048458] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.048815] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.049295] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.050997] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.051307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.068688] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.068772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.068895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.069019] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.069865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.070010] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.070133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.070281] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.075501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.076625] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.076800] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.076941] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.077078] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.077236] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.077420] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [425.077462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.077621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [425.079131] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.079284] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.079446] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.079561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.081050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.105662] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.108475] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.108816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.109190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.110138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.110519] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.110907] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.111453] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.113214] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.113531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.129791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.129875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.129992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.130113] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.130975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.131133] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.131257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.131403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.137725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.138876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.139040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.139179] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.139318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.139479] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.139667] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [425.139706] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [425.139878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.141375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.141539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.141739] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.141891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.143346] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.168014] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.170739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.171133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.171535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.172386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.172787] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.173203] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.173725] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.175749] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.176087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.192312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.192406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.220356] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [425.220366] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [425.220369] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [425.220372] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [425.220375] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [425.220378] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [425.220381] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [425.220385] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [425.221001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [425.221123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [425.221930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [425.222043] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [425.222060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.222199] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.230141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.231299] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.231441] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.231585] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.231731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.231889] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.232070] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [425.232092] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [425.232248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.233704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.233871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.234030] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.234144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.235617] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.260195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.262754] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.263116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.263481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.264162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.264511] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.264860] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.265321] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.267001] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.267320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.283563] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.283655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.283803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.283940] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.285777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.285910] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.286031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.286174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.292582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.293762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.293911] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.294051] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.294187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.294369] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.294570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.294747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [425.294771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [425.296273] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.296436] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.296608] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.296744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.298219] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.322776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.325604] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.325883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.326254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.326990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.327333] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.327675] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.328183] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.329883] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.330235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.346395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.346485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.346604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.346752] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.347638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.347788] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.347912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.348054] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.353252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.354403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.354544] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.354684] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.354823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.354983] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.355163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [425.355207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.355367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [425.356704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.356863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.357017] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.357127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.358593] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.383224] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.387791] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.388161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.388537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.389219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.389563] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.389906] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.390349] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.392226] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.392540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.411063] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.411168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.411303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.411426] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.412232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.412367] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.412488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.412650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.418982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.420143] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.420283] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.420424] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.420565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.420734] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.420931] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [425.420954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [425.421088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.422639] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.422822] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.422995] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.423122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.424598] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.449174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.453780] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.454179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.454576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.455295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.455671] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.456048] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.456516] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.458343] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.458726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.476047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.476126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.476249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.476372] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.477300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.477432] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.477558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.477713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.482903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.484050] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.484194] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.484334] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.484470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.484627] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.484822] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [425.484877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.485043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [425.486542] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.486710] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.486882] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.487010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.489697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.514299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.518808] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.519181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.519554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.520413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.520790] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.521144] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.521720] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.523705] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.524055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.541382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.541464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.570306] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [425.570315] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [425.570318] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [425.570321] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [425.570325] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [425.570328] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [425.570331] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [425.570334] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [425.570967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [425.571082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [425.571674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [425.571793] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [425.571810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.571950] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.580265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.581424] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.581566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.581721] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.581865] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.582046] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.582230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [425.582254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [425.582391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.583707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.583871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.584031] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.584143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.585612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.610200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.612751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.612962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.613185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.613802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.614153] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.614477] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.614962] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.616644] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.616950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.633070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.633152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.633273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.633396] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.634317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.634452] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.634576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.634737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.639955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.641078] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.641219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.641359] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.641499] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.641656] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.641861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [425.641910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.642069] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [425.643566] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.643740] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.643913] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.644040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.645694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.670149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.674828] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.675207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.675576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.676442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.676821] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.677166] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.677638] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.679629] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.679972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.697264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.697353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.697483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.697619] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.699579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.699765] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.699893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.700041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.705255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.706407] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.706548] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.706673] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.706816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.706982] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.707154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [425.707201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.707356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [425.708704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.708863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.709037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.709150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.711763] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.736377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.740779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.741152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.741524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.742403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.742772] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.743100] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.743555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.745249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.745569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.761743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.761850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.761968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.762089] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.763002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.763139] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.763263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.763408] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.768607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.769754] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.769896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.770038] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.770176] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.770337] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.770538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.770693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [425.770737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [425.772171] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.772339] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.772512] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.772640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.775417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.800092] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.804817] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.805191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.805566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.806286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.806635] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.807015] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.807497] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.809446] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.809808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.824932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.825024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.825145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.825269] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.826099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.826233] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.826354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.826496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.832813] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.833976] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.834122] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.834262] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.834399] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.834556] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.834737] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [425.834769] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [425.834905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.836376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.836536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.836731] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.836858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.839672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.864257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.866781] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.867143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.867519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.868213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.868561] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.868931] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.869407] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.871339] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.871670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.890118] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.890198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.918057] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [425.918067] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [425.918070] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [425.918073] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [425.918077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [425.918080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [425.918083] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [425.918086] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [425.918711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [425.918833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [425.919586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [425.919714] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [425.919731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.919875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.926882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.928004] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.928163] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.928294] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.928417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.928577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.928808] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [425.928831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [425.928976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.930373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.930531] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.930697] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.930833] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.932313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [425.956893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [425.959659] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [425.959959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [425.960252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [425.960837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [425.961114] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [425.961375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [425.961760] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [425.963140] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [425.963393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [425.980617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [425.980730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [425.980855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [425.980978] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [425.981867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [425.982000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [425.982109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [425.982237] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [425.988598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [425.989748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.989893] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [425.990026] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.990151] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [425.990297] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [425.990472] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [425.990495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [425.990632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [425.992198] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [425.992351] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [425.992522] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [425.992635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [425.994122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.018645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.023822] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.024179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.024533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.025212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.025586] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.025967] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.026463] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.028207] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.028485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.044714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.044809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.044928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.045049] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.045875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.046008] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.046124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.046257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.051466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.052611] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.052762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.052893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.053017] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.053162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.053332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [426.053376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.053532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [426.054704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.054865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.055037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.055165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.057750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.082350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.086817] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.087190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.087568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.088275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.088618] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.088972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.089444] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.091191] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.091533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.110076] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.110167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.110286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.110409] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.111242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.111402] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.111525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.111669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.116887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.118038] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.118199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.118339] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.118477] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.118636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.118858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.119016] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [426.119058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [426.120379] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.120543] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.120722] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.120872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.123669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.148335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.152826] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.153202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.153571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.154312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.154719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.155094] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.155589] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.157376] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.157741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.176176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.176276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.176396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.176521] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.177441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.177601] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.177743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.177910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.183132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.184251] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.184414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.184553] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.184703] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.184882] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.185064] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [426.185108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.185273] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [426.186710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.186878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.187051] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.187178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.189748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.214373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.218730] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.219103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.219477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.220291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.220708] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.221115] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.221597] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.223460] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.223804] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.241103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.241184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.269185] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [426.269195] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [426.269198] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [426.269201] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [426.269205] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [426.269208] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [426.269211] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [426.269214] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [426.269754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [426.269888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [426.270544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [426.270653] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [426.270669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.270819] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.279022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.280160] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.280318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.280447] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.280577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.280744] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.280960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [426.280992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [426.281130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.282702] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.282866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.283029] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.283143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.284612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.309178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.311737] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.311876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.312024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.312435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.312763] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.313097] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.313488] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.315000] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.315271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.331433] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.331518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.331639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.331776] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.332604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.332752] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.332895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.333042] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.338245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.339387] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.339558] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.339691] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.339852] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.340006] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.340213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.340367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [426.340413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [426.341704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.341864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.342034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.342158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.343638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.368162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.372822] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.373178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.373531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.374413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.374763] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.375118] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.375564] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.377312] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.377626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.394903] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.394983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.395100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.395226] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.397217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.397360] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.397480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.397628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.402891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.404035] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.404200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.404331] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.404458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.404608] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.404801] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [426.404862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.405062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [426.406373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.406539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.406717] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.406865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.409665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.434339] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.436746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.437103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.437475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.438225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.438578] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.438938] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.439435] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.441175] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.441492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.457735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.457825] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.457950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.458074] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.458897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.459059] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.459182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.459326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.465691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.466809] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.466978] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.467107] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.467232] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.467377] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.467553] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [426.467592] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [426.467747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.469342] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.469506] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.469674] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.469814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.471318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.495918] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.498748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.499090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.499446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.500220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.500532] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.500851] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.501304] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.502805] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.503050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.520348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.520430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.520551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.520673] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.521512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.521664] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.521809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.521979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.527178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.528324] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.528492] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.528621] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.528763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.528941] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.529161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.529318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [426.529371] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [426.530706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.530871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.531044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.531169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.532648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.557197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.559785] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.560170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.560546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.561463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.561843] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.562223] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.562675] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.564379] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.564652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.580857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.580965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.609032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [426.609041] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [426.609045] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [426.609047] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [426.609051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [426.609054] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [426.609057] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [426.609061] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [426.609589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [426.609706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [426.610328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [426.610435] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [426.610452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.610601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.618753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.619901] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.620065] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.620193] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.620321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.620482] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.620652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [426.620675] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [426.620820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.622372] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.622536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.622716] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.622866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.624340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.648959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.651725] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.652016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.652315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.653014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.653302] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.653559] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.653988] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.655367] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.655625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.674000] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.674082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.674202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.674322] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.675268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.675406] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.675518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.675650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.680874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.682003] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.682169] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.682296] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.682423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.682570] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.682767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [426.682839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.682983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [426.684373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.684536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.684709] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.684856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.686323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.710944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.713740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.713981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.714264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.715024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.715362] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.715668] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.716143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.717676] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.717966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.735286] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.735368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.735491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.735611] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.736465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.736615] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.736750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.736918] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.743242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.744395] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.744553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.744688] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.744848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.744996] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.745186] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [426.745222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [426.745364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.746709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.746876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.747051] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.747179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.748664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.773290] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.777830] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.778186] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.778536] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.779247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.779585] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.779915] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.780401] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.782204] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.782557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.798745] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.798839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.798957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.799079] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.800013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.800157] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.800280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.800424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.807894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.809048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.809205] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.809333] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.809460] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.809609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.809786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [426.809812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [426.809989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.811558] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.811737] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.811904] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.812034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.813506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.838108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.840742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.840974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.841220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.842067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.842395] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.842733] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.843204] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.844737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.845019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.862362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.862448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.862570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [426.862714] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [426.863519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [426.863652] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [426.863788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.863957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.870287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.871439] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.871614] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.871766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.871923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.872069] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.872268] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [426.872297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [426.872434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.873706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.873867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.874036] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.874166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.875630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.900183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.902787] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.903150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.903526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.904354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.904725] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.905105] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.905572] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.907319] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.907576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [426.923769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [426.923855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [426.951760] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [426.951771] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [426.951774] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [426.951777] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [426.951788] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [426.951791] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [426.951794] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [426.951798] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [426.952326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [426.952432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [426.952991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [426.953102] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [426.953119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [426.953264] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [426.960522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [426.961651] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.961833] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [426.961977] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.962104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [426.962250] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [426.962426] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [426.962449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [426.962588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [426.964156] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [426.964318] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [426.964479] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [426.964591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [426.966075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [426.990628] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [426.993388] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [426.993654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [426.993968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [426.994766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [426.995073] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [426.995324] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [426.995705] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [426.996927] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [426.997147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.012154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.012238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.012363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.012487] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.013337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.013466] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.013582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.013751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.020105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.021255] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.021425] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.021557] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.021687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.021867] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.022057] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [427.022081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [427.022220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.023706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.023870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.024041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.024157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.025628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.050219] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.052746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.053084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.053434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.054141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.054467] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.054797] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.055270] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.056887] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.057192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.074462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.074546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.074665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.074817] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.075718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.075877] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.076003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.076145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.081337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.082477] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.082643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.082806] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.082961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.083112] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.083302] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [427.083346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.083503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [427.084705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.084884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.085050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.085171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.086645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.111205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.113806] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.114173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.114544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.115540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.115898] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.116254] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.116700] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.118337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.118579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.133621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.133730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.133860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.133984] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.134783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.134941] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.135052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.135184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.141512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.142668] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.142825] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.142961] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.143086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.143231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.143423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [427.143446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [427.143586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.145156] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.145317] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.145474] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.145586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.147074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.171623] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.174466] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.174812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.175158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.175807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.176226] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.176535] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.177019] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.178395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.178667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.196016] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.196100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.196222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.196342] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.197186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.197340] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.197464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.197610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.202815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.203970] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.204134] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.204273] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.204410] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.204571] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.204765] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [427.204826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.205007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [427.206377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.206543] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.206729] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.206876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.208342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.232937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.235737] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.236062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.236410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.237280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.237609] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.237946] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.238420] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.239898] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.240166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.255216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.255296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.283303] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [427.283312] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [427.283316] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [427.283318] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [427.283322] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [427.283325] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [427.283328] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [427.283331] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [427.283959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [427.284095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [427.284731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [427.284872] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [427.284889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.285030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.291917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.293066] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.293231] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.293371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.293507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.293665] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.293878] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [427.293912] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [427.294058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.295622] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.295796] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.295969] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.296084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.298745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.323375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.327813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.328148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.328483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.329180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.329491] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.329803] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.330267] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.331756] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.332054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.349415] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.349499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.349618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.349762] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.350575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.350720] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.350867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.351014] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.356236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.357363] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.357525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.357653] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.357799] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.357975] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.358161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [427.358206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.358362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [427.359705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.359870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.360034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.360153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.362749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.387343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.389746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.389977] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.390225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.390938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.391309] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.391635] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.392098] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.393754] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.394048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.410250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.410355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.410474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.410595] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.411420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.411575] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.411706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.411884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.418229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.419374] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.419536] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.419675] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.419816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.419996] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.420185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [427.420208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [427.420344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.421711] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.421878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.422052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.422180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.423668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.448228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.450773] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.451139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.451518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.452348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.452733] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.453116] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.453593] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.455453] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.455729] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.473038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.473146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.473270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.473390] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.474208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.474366] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.474490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.474636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.479863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.480993] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.481162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.481304] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.481442] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.481600] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.481801] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [427.481861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.482022] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [427.483375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.483538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.483714] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.483863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.485339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.509965] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.512701] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.512891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.513090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.513883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.514268] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.514578] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.515102] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.516636] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.516949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.533139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.533245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.533368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.533492] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.534309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.534464] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.534578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.534739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.541094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.542244] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.542408] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.542538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.542666] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.542846] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.543080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.543233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [427.543269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [427.544710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.544877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.545045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.545160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.546626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.571195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.573762] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.574105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.574459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.575183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.575520] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.575853] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.576332] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.577917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.578224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.595572] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.595686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.623478] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [427.623488] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [427.623491] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [427.623494] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [427.623497] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [427.623500] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [427.623503] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [427.623507] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [427.623984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [427.624100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [427.624906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [427.625016] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [427.625032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.625171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.633414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.634583] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.634730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.634866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.634993] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.635142] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.635314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [427.635337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [427.635473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.637031] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.637187] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.637357] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.637472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.639748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.664385] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.666779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.667139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.667513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.668214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.668565] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.668916] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.669363] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.671031] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.671354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.688614] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.688706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.688840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.688972] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.689864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.689992] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.690114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.690261] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.696575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.697756] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.697900] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.698025] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.698147] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.698292] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.698466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [427.698489] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [427.698629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.700203] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.700362] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.700532] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.700655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.702160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.726783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.729612] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.729898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.730272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.731013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.731358] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.731698] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.732150] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.733727] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.734031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.750170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.750247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.750368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.750486] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.751410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.751541] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.751663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.751832] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.757027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.758174] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.758317] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.758443] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.758568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.758726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.758907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [427.758951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.759107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [427.760604] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.760770] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.760932] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.761048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.762514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.787113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.789739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.789962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.790195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.790967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.791288] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.791593] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.792048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.793630] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.793920] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.808986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.809064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.809186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.809306] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.810155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.810288] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.810407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.810548] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.816873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.818029] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.818174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.818313] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.818448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.818604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.818778] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [427.818800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [427.818935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.820373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.820535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.820725] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.820855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.822340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.846957] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.849720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.850065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.850417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.851077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.851404] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.851724] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.852157] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.853833] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.854134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.870357] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.870436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.870556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [427.870688] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [427.871526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [427.871661] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [427.871793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.871937] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.878274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.879430] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.879576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.879711] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.879849] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.879999] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.880176] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [427.880207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [427.880345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.881704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.881863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.882034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.882145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.884758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [427.909361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [427.913815] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [427.914189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [427.914557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [427.915245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [427.915591] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [427.915947] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [427.916427] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [427.918164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [427.918496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [427.936918] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [427.936996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [427.964987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [427.964997] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [427.965000] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [427.965003] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [427.965007] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [427.965010] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [427.965013] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [427.965016] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [427.965548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [427.965651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [427.966240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [427.966350] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [427.966367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [427.966506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [427.973722] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [427.974840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.974984] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [427.975127] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.975265] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [427.975426] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [427.975605] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [427.975627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [427.975796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [427.977365] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [427.977516] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [427.977693] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [427.977819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [427.979300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.003886] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.006712] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.007025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.007337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.008089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.008381] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.008650] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.009063] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.010500] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.010776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.026967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.027046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.027165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.027285] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.028129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.028257] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.028369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.028497] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.034839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.036008] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.036150] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.036291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.036431] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.036590] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.036780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [428.036804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [428.036951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.038374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.038534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.038711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.038837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.040308] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.064943] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.067725] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.068094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.068470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.069318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.069662] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.070012] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.070462] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.072181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.072489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.088738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.088819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.088945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.089068] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.090949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.091083] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.091206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.091349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.097760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.098919] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.099058] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.099202] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.099341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.099500] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.099689] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [428.099712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [428.099851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.101375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.101535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.101714] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.101838] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.103309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.127897] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.130695] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.130879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.131076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.131738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.132085] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.132412] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.132885] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.134479] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.134790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.150909] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.150990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.151106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.151225] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.152161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.152304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.152427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.152569] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.158880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.160041] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.160186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.160327] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.160463] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.160621] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.160803] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [428.160826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [428.160966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.162375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.162536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.162712] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.162835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.164298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.188943] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.191708] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.191894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.192091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.192734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.193152] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.193478] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.193979] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.195695] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.195999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.213267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.213350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.213470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.213590] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.214523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.214664] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.214797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.214959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.220161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.221302] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.221460] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.221589] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.221733] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.221909] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.222087] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [428.222130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.222295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [428.223704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.223870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.224039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.224163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.225648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.250229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.252774] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.253135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.253505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.254257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.254588] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.254928] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.255395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.256968] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.257257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.272293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.272371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.300157] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [428.300168] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [428.300171] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [428.300175] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [428.300178] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [428.300182] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [428.300185] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [428.300189] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [428.300904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [428.301017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [428.301650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [428.301770] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [428.301786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.301926] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.309000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.310122] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.310292] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.310437] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.310576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.310754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.310951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [428.310973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [428.311112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.312676] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.312852] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.313019] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.313133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.314601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.339165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.341738] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.341907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.342086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.342702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.343034] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.343280] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.343629] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.345002] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.345234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.361294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.361372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.361491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.361614] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.362553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.362705] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.362853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.362992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.369307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.370462] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.370620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.370762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.370915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.371062] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.371248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [428.371288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [428.371426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.372707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.372869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.373041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.373165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.374631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.399250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.403818] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.404150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.404484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.405178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.405537] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.405925] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.406452] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.408349] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.408631] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.425901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.425984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.426102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.426223] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.427167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.427297] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.427409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.427542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.432748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.433893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.434061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.434190] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.434315] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.434459] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.434636] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [428.434688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.434867] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [428.436374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.436538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.436707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.436862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.438339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.463009] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.465743] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.466108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.466483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.467474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.467857] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.468245] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.468668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.470246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.470553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.485651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.485766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.485889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.486012] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.486831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.486965] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.487076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.487209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.493537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.494699] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.494858] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.494986] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.495111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.495256] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.495441] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [428.495465] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [428.495607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.497173] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.497337] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.497509] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.497635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.499132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.523768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.526598] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.526938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.527286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.528045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.528394] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.528729] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.529217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.530673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.530956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.547135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.547217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.547340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.547460] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.548302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.548450] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.548572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.548738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.553975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.555095] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.555263] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.555401] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.555537] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.555707] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.555904] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [428.555970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.556134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [428.557633] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.557814] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.557977] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.558100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.559567] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.584196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.586768] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.587030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.587305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.588015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.588323] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.588611] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.589067] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.590697] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.590956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.607121] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.607211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.635056] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [428.635066] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [428.635069] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [428.635072] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [428.635075] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [428.635078] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [428.635081] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [428.635085] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [428.635613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [428.635733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [428.636380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [428.636486] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [428.636504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.636645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.643882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.645002] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.645168] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.645300] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.645428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.645581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.645786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [428.645820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [428.645964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.647378] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.647540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.647722] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.647869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.649342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.673971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.676713] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.676914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.677146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.677895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.678196] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.678447] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.678848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.680162] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.680392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.695392] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.695476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.695597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.695742] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.696555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.696705] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.696855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.697001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.703356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.704478] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.704642] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.704786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.704944] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.705091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.705278] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [428.705301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [428.705442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.706705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.706867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.707033] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.707157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.708640] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.733201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.735771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.736136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.736509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.737321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.737660] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.738003] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.738486] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.740017] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.740268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.757575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.757655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.757801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.757969] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.758749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.758908] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.759024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.759172] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.764384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.765510] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.765672] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.765818] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.765974] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.766117] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.766295] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [428.766338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.766499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [428.767706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.767867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.768039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.768163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.769648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.794203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.796782] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.797146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.797520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.798352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.798716] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.799096] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.799527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.801104] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.801384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.818594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.818687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.818848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.818974] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.819871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.820012] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.820136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.820268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.826586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.827754] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.827914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.828042] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.828166] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.828313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.828487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [428.828525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [428.828673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.830252] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.830413] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.830582] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.830720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.832225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.856807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.859628] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.860021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.860394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.861146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.861533] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.861902] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.862405] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.864131] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.864445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.880668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.880791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.880927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [428.881060] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [428.881873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [428.882003] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [428.882117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.882251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.887447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.888594] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.888752] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.888882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.889012] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.889163] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.889354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [428.889396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.889552] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [428.891064] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.891222] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.891389] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.891510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.893740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [428.918333] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [428.920741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [428.920936] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [428.921137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [428.921830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [428.922215] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [428.922524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [428.923048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [428.924717] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [428.925009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [428.940068] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [428.940147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [428.968152] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [428.968162] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [428.968165] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [428.968168] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [428.968172] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [428.968175] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [428.968178] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [428.968182] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [428.968722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [428.968838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [428.969444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [428.969550] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [428.969567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [428.969713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [428.977916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [428.979040] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.979207] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [428.979351] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.979489] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [428.979649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [428.979855] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [428.979881] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [428.980056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [428.981613] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [428.981814] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [428.981982] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [428.982098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [428.983569] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.008134] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.010752] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.011075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.011411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.012098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.012402] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.012696] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.013137] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.014522] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.014808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.029851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.029934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.030058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.030180] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.031041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.031171] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.031282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.031415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.036633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.037755] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.037916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.038044] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.038171] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.038320] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.038500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [429.038542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.038700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [429.040231] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.040402] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.040580] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.040712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.042223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.066815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.069585] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.069776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.069958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.070477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.070799] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.071123] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.071515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.072954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.073225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.089390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.089470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.089591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.089734] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.090551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.090703] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.090855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.090999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.096218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.097340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.097501] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.097631] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.097776] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.097961] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.098132] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [429.098201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.098358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [429.099704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.099871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.100044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.100170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.101633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.126203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.128746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.129065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.129392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.130079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.130419] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.130777] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.131238] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.132920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.133228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.149414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.149493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.149613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.149761] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.150577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.150717] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.150860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.151012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.157338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.158482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.158627] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.158776] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.158916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.159064] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.159247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [429.159269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [429.159409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.160704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.160865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.161024] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.161139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.162607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.187218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.189764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.190128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.190502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.191250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.191603] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.191963] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.192476] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.194056] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.194366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.211726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.211830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.211954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.212081] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.212904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.213042] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.213155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.213286] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.218507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.219628] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.219813] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.219957] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.220084] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.220231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.220398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [429.220443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.220606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [429.222119] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.222288] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.222461] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.222579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.224058] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.248655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.251446] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.251797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.252143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.252981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.253332] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.253645] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.254107] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.255527] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.255809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.271993] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.272076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.300105] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [429.300115] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [429.300119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [429.300122] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [429.300126] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [429.300129] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [429.300132] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [429.300136] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [429.300670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [429.300799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [429.301424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [429.301531] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [429.301548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.301695] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.308657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.309780] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.309943] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.310072] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.310200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.310349] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.310538] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [429.310560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [429.310690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.312290] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.312457] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.312631] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.312772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.314280] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.338880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.341637] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.341797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.341953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.342575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.342847] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.343144] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.343487] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.344803] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.345031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.360037] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.360118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.360238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.360364] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.361212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.361364] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.361487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.361631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.367984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.369132] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.369302] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.369444] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.369581] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.369748] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.369944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [429.369968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [429.370114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.371685] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.371848] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.372017] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.372142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.373622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.398209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.402820] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.403173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.403534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.404289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.404645] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.404999] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.405500] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.407152] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.407464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.423698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.423803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.423923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.424044] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.424893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.425022] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.425136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.425270] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.430479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.431603] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.431786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.431936] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.432061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.432221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.432402] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [429.432453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.432611] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [429.434115] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.434287] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.434458] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.434582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.436075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.460646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.463419] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.463794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.464166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.465115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.465469] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.465826] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.466331] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.468197] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.468467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.486845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.486929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.487052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.487173] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.488106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.488248] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.488359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.488489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.493706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.494837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.495002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.495131] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.495263] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.495422] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.495602] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [429.495648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.495832] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [429.497374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.497551] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.497721] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.497868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.499373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.523964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.526793] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.527158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.527528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.528267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.528597] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.528924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.529400] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.531006] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.531282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.547391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.547471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.547593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.547741] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.548637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.548792] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.548939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.549073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.555415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.556558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.556727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.556860] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.556988] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.557136] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.557320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [429.557351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [429.557492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.559058] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.559228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.559403] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.559527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.561750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.586352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.588752] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.588993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.589243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.589841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.590242] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.590576] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.591106] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.592814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.593095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.610344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.610423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.638278] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [429.638288] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [429.638291] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [429.638294] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [429.638298] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [429.638301] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [429.638304] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [429.638307] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [429.638937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [429.639053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [429.639896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [429.640004] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [429.640021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.640162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.648205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.649335] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.649501] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.649643] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.649787] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.649965] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.650139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [429.650162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [429.650303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.651706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.651872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.652038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.652165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.653642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.678197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.680739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.681031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.681340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.682057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.682360] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.682639] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.683092] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.684575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.684840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.701001] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.701083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.701201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.701324] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.702181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.702316] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.702425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.702554] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.707761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.708909] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.709079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.709209] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.709334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.709479] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.709657] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [429.709718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.709893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [429.711377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.711539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.711709] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.711857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.713323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.737952] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.740699] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.740863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.741032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.741754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.742127] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.742418] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.742874] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.744401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.744661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.759722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.759823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.759946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.760070] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.760906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.761043] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.761154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.761284] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.767595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.768772] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.768934] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.769062] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.769187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.769335] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.769513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [429.769536] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [429.769689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.771280] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.771440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.771600] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.771730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.773233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.797835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.800766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.801106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.801459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.802176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.802521] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.802854] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.803379] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.804804] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.805081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.821266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.821349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.821470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.821590] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.822444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.822591] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.822729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.822896] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.828099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.829237] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.829400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.829528] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.829655] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.829830] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.830060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.830216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [429.830261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [429.831706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.831876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.832037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.832153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.833618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.858190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.860791] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.861161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.861537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.862545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.862922] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.863284] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.863746] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.865311] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.865598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.881769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.881877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.881996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [429.882119] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [429.882945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [429.883090] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [429.883212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.883354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.889689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.890841] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.890997] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.891128] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.891254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.891401] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.891565] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [429.891595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [429.891730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.893320] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.893484] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.893657] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.893800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.895298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [429.919848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [429.922621] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [429.922989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [429.923342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [429.924040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [429.924369] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [429.924672] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [429.925152] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [429.926908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [429.927217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [429.944577] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [429.944657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [429.972784] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [429.972794] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [429.972797] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [429.972800] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [429.972803] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [429.972807] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [429.972810] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [429.972813] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [429.973454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [429.973561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [429.974181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [429.974325] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [429.974343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [429.974481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [429.981256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [429.982403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.982578] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [429.982727] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.982887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [429.983044] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [429.983223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [429.983246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [429.983382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [429.984704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [429.984868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [429.985034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [429.985148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [429.986618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.011187] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.013739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.013904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.014075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.014515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.014808] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.015106] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.015458] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.016758] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.017006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.033170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.033270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.033394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.033516] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.034346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.034485] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.034594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.034756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.040008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.041141] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.041306] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.041438] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.041566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.041734] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.041952] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [430.041994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.042160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [430.043664] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.043840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.044012] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.044129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.045595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.070236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.072779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.073120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.073470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.074434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.074786] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.075150] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.075561] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.077045] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.077338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.092407] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.092490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.092610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.092750] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.093558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.093710] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.093837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.093976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.100286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.101453] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.101596] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.101745] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.101888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.102035] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.102214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [430.102237] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [430.102370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.103705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.103866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.104038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.104151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.105614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.130206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.132749] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.132990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.133260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.133930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.134306] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.134611] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.135093] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.136592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.136870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.154102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.154183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.154307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.154431] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.155366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.155509] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.155624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.155777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.161006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.162153] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.162316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.162443] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.162569] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.162735] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.162967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.163123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [430.163167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [430.164604] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.164774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.164937] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.165053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.166520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.191102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.193765] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.194143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.194521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.195431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.195806] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.196170] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.196605] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.198193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.198442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.213476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.213556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.213675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.213819] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.214635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.214789] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.214934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.215077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.221433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.222557] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.222726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.222863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.222987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.223133] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.223321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [430.223353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [430.223495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.225071] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.225235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.225408] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.225533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.227738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.252334] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.254745] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.254965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.255201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.256040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.256370] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.256676] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.257157] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.258708] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.259002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.275206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.275286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.303208] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [430.303218] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [430.303221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [430.303224] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [430.303228] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [430.303231] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [430.303234] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [430.303237] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [430.303866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [430.304003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [430.304663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [430.304782] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [430.304800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.304964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.313030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.314166] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.314338] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.314482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.314624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.314805] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.315007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [430.315029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [430.315168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.316719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.316883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.317041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.317154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.318622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.343189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.345764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.346070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.346383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.347030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.347325] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.347597] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.348025] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.349779] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.350044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.366222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.366301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.366426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.366553] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.367399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.367545] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.367671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.367841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.374212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.375365] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.375525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.375654] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.375801] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.375977] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.376159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [430.376183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [430.376322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.377708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.377873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.378041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.378155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.379624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.404243] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.406768] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.407089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.407421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.408112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.408433] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.408759] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.409226] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.410642] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.410930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.429298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.429380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.429498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.429621] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.430558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.430731] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.430876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.431022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.437346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.438500] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.438664] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.438811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.438974] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.439122] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.439292] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [430.439315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [430.439457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.440705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.440868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.441038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.441161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.442633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.467257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.469772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.470111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.470459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.471162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.471487] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.471827] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.472312] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.474073] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.474394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.490651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.490755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.490887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.491010] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.491832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.491989] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.492110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.492253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.498570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.499726] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.499896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.500036] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.500173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.500333] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.500514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [430.500538] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [430.500689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.502279] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.502444] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.502615] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.502766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.504267] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.528802] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.533813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.534190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.534560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.535303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.535661] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.536053] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.536609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.538464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.538797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.555023] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.555105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.555231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.555357] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.556188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.556347] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.556469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.556614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.562938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.564096] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.564261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.564402] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.564538] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.564711] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.564911] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [430.564944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [430.565083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.566641] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.566829] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.567001] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.567127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.569750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.594412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.596702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.596901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.597122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.597623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.598017] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.598417] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.598925] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.600764] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.601087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.618370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.618452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.646415] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [430.646425] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [430.646428] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [430.646431] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [430.646434] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [430.646438] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [430.646441] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [430.646444] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [430.646970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [430.647090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [430.647856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [430.647976] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [430.647993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.648136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.655079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.656205] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.656372] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.656517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.656656] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.656828] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.657052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.657204] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [430.657227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [430.658706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.658875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.659048] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.659177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.661739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.686311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.690808] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.691187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.691562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.692294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.692654] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.693041] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.693571] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.695414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.695763] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.713047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.713128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.713248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.713368] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.714299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.714452] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.714573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.714731] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.721095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.722234] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.722403] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.722544] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.722688] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.722876] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.723081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.723234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [430.723257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [430.724718] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.724878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.725049] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.725172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.727747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.752384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.756821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.757219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.757591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.758326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.758716] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.759122] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.759604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.761478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.761850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.778111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.778193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.778317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.778442] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.779294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.779434] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.779554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.779709] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.786069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.787221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.787385] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.787525] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.787664] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.787839] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.788043] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [430.788067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [430.788208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.789719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.789880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.790039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.790155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.792746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.817363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.821807] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.822184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.822560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.823316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.823701] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.824089] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.824587] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.826596] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.826970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.843236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.843321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.843442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.843569] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.844413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.844558] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.844689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.844850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.851193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.852330] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.852505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.852646] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.852793] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.852978] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.853160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [430.853184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [430.853317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.854720] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.854885] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.855056] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.855178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.857761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.882418] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.886819] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.887214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.887609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.888457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.888857] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.889273] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.889775] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.891642] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.892010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.909409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.909491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [430.909614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [430.909752] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [430.910578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [430.910729] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [430.910872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [430.911017] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [430.917358] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [430.918497] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.918665] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [430.918816] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.918965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [430.919129] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [430.919310] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [430.919341] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [430.919477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [430.920719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [430.920882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [430.921038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [430.921152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [430.923749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [430.948385] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [430.952832] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [430.953204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [430.953575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [430.954312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [430.954670] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [430.955031] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [430.955569] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [430.957408] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [430.957766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [430.976209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [430.976317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.004065] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [431.004075] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [431.004078] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [431.004081] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [431.004085] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [431.004088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [431.004091] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [431.004094] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [431.004625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [431.004768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [431.005434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [431.005551] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [431.005568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.005718] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.012891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.014037] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.014205] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.014347] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.014485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.014644] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.014834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [431.014868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [431.015019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.016586] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.016765] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.016938] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.017062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.019746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.044364] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.048818] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.049196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.049570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.050413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.050808] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.051210] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.051739] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.053502] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.053843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.071139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.071224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.071344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.071463] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.072393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.072550] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.072672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.072839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.078068] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.079205] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.079371] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.079509] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.079647] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.079821] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.080015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [431.080058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.080216] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [431.081706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.081870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.082040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.082164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.084754] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.109353] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.113771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.114136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.114512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.115508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.115899] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.116327] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.116866] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.118658] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.118997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.137419] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.137503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.137621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.137775] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.138664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.138815] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.138960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.139110] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.145433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.146585] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.146763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.146903] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.147039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.147201] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.147384] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [431.147407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [431.147544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.149109] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.149275] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.149446] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.149570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.151050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.175189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.179723] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.180102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.180473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.181469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.181873] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.182301] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.182786] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.184615] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.184996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.203459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.203568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.203701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.203842] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.204733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.204880] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.205005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.205149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.210348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.211487] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.211652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.211806] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.211957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.212125] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.212308] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [431.212351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.212507] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [431.213709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.213869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.214037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.214164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.215644] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.240217] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.242742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.243106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.243481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.244221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.244575] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.244924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.245428] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.247393] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.247743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.263974] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.264057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.264180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.264300] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.265153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.265291] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.265405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.265536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.271870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.273025] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.273187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.273328] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.273465] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.273624] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.273834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [431.273865] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [431.274037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.275586] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.275783] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.275953] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.276068] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.277537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.302158] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.304758] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.305032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.305351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.306142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.306472] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.306812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.307301] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.308845] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.309109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.325204] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.325288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.353062] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [431.353073] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [431.353077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [431.353080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [431.353084] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [431.353087] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [431.353090] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [431.353094] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [431.353628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [431.353781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [431.354412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [431.354521] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [431.354538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.354692] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.363003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.364157] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.364320] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.364463] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.364602] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.364781] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.364991] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [431.365015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [431.365147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.366722] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.366887] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.367055] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.367173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.368651] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.393278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.395758] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.396100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.396454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.397246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.397538] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.397833] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.398231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.399605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.399890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.417135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.417216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.417337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.417458] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.418390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.418538] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.418651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.418826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.425213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.426360] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.426521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.426661] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.426810] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.426985] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.427181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.427359] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [431.427378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [431.428708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.428890] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.429050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.429168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.430645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.455211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.457736] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.457912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.458094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.458855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.459218] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.459509] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.459964] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.461622] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.461895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.478070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.478149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.478270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.478392] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.479238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.479400] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.479514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.479647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.484871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.485999] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.486166] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.486297] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.486423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.486567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.486764] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [431.486821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.486977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [431.488380] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.488542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.488718] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.488863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.490337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.514938] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.517706] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.517932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.518165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.518840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.519213] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.519502] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.519983] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.521568] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.521855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.538041] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.538120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.538240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.538360] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.539208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.539360] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.539469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.539604] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.544800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.545946] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.546115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.546243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.546365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.546514] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.546713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [431.546765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [431.546927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.548376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.548537] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.548720] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.548867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.550337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.574997] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.577718] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.578061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.578411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.579221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.579657] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.579993] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.580414] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.582093] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.582372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.599585] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.599667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.599800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.599959] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.600853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.601000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.601123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.601256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.606467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.607589] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.607767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.607906] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.608035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.608182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.608350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [431.608396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.608560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [431.610071] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.610235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.610397] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.610510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.612740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.637347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.639746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.639979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.640225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.640803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.641213] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.641533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.642048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.643767] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.644056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.661400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.661480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.689420] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [431.689430] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [431.689434] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [431.689436] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [431.689440] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [431.689443] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [431.689446] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [431.689449] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [431.689983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [431.690123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [431.690953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [431.691088] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [431.691105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.691247] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.698039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.699184] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.699356] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.699498] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.699640] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.699812] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.700050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.700205] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [431.700228] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [431.701705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.701867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.702030] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.702145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.703618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.728148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.730727] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.731027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.731326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.732020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.732307] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.732575] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.732992] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.734419] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.734673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.750777] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.750883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.751007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.751132] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.752042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.752185] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.752307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.752447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.758805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.759930] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.760097] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.760241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.760378] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.760537] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.760735] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [431.760770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [431.760918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.762377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.762527] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.762697] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.762845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.764314] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.788862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.791665] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.792064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.792447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.793232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.793569] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.793914] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.794392] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.795920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.796156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.814584] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.814666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.814808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.814964] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.815752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.815915] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.816041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.816188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.821410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.822533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.822704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.822847] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.822971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.823120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.823300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [431.823342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.823501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [431.824711] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.824872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.825042] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.825169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.826649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.851301] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.853767] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.854108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.854466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.855352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.855710] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.856063] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.856499] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.858043] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.858339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.874542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.874621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.874792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.874963] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.875783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.875941] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.876060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.876191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.882549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.883662] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.883821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.883986] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.884115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.884260] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.884433] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [431.884456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [431.884596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.886170] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.886336] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.886500] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.886613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.888091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.912628] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.915402] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.915588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.915886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.916555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.916908] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.917261] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.917708] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.919230] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.919489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.935597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.935710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [431.935841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [431.935966] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [431.936875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [431.937009] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [431.937121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [431.937252] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [431.942468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [431.943600] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.943796] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [431.943934] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.944060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [431.944206] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [431.944397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [431.944546] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [431.944599] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [431.946037] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [431.946207] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [431.946369] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [431.946487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [431.948746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [431.973321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [431.975710] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [431.975904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [431.976109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [431.976592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [431.976938] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [431.977279] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [431.977708] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [431.979403] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [431.979673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [431.998079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [431.998168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.026330] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [432.026340] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [432.026343] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [432.026346] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [432.026349] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [432.026352] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [432.026355] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [432.026359] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [432.027013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [432.027133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [432.027854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [432.028006] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [432.028023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.028161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.035965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.037115] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.037257] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.037400] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.037528] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.037676] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.037873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [432.037896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [432.038045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.039629] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.039816] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.039992] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.040108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.041578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.066169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.068696] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.068862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.069013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.069420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.069777] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.070125] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.070527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.071825] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.072110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.089359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.089443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.089565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.089700] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.091665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.091840] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.091960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.092095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.097350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.098493] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.098656] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.098807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.098961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.099116] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.099299] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [432.099350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.099494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [432.100706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.100871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.101047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.101162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.103752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.128338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.132816] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.133194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.133567] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.134560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.134974] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.135381] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.135921] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.137784] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.138137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.154348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.154433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.154553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.154673] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.156599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.156774] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.156897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.157032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.162275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.163399] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.163560] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.163707] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.163874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.164029] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.164219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [432.164261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.164417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [432.165706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.165865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.166038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.166164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.167643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.192212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.194748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.194893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.195046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.195552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.195944] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.196334] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.196797] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.198077] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.198407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.215712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.215816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.215950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.216086] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.216976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.217112] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.217225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.217357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.223715] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.224847] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.225015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.225146] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.225273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.225423] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.225611] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [432.225634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [432.225794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.227376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.227540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.227715] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.227859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.230690] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.255311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.257776] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.258116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.258462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.259177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.259508] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.259839] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.260277] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.262043] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.262337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.279690] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.279801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.279926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.280050] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.280861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.281005] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.281119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.281254] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.286472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.287592] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.287773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.287915] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.288044] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.288191] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.288365] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [432.288410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.288575] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [432.290089] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.290251] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.290413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.290534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.292743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.317341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.319747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.319928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.320121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.320618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.320942] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.321274] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.321671] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.323213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.323466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.338519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.338626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.366558] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [432.366568] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [432.366571] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [432.366574] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [432.366577] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [432.366580] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [432.366583] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [432.366587] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [432.367041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [432.367158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [432.367752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [432.367858] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [432.367875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.368012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.375183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.376303] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.376472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.376617] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.376770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.376954] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.377137] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [432.377160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [432.377293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.378709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.378873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.379045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.379170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.380653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.405296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.407771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.408056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.408353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.409037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.409317] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.409573] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.409993] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.411472] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.411744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.429061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.429142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.429267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.429390] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.430251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.430383] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.430494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.430631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.436987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.438148] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.438311] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.438454] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.438595] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.438765] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.438996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.439157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [432.439176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [432.440671] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.440849] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.441017] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.441133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.442601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.467255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.471822] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.472176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.472535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.473251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.473605] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.473978] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.474536] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.476356] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.476650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.492859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.492942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.493061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.493182] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.494039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.494178] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.494289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.494423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.501879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.503036] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.503200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.503327] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.503454] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.503601] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.503798] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [432.503832] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [432.503987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.505550] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.505718] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.505916] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.506033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.508667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.533319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.535772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.536161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.536533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.537278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.537642] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.538004] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.538528] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.540555] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.540912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.558202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.558314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.558435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.558555] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.559463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.559617] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.559757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.559923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.565136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.566259] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.566423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.566563] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.566711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.566896] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.567072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [432.567118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.567273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [432.568711] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.568877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.569036] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.569148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.570615] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.595206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.597774] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.598138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.598509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.599505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.599860] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.600209] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.600649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.602213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.602459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.617492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.617576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.617723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.617884] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.618657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.618802] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.618947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.619093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.626560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.627709] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.627874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.627998] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.628123] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.628273] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.628446] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [432.628493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [432.628628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.630207] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.630371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.630543] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.630667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.632169] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.656722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.659460] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.659830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.660207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.660920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.661283] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.661597] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.662071] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.663609] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.663852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.681046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.681127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.709108] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [432.709118] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [432.709122] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [432.709125] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [432.709129] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [432.709132] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [432.709136] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [432.709139] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [432.709856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [432.709975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [432.710633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [432.710749] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [432.710766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.710907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.717922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.719043] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.719210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.719340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.719466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.719616] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.719804] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [432.719833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [432.719992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.721557] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.721727] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.721891] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.722003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.724697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.749285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.751753] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.751928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.752107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.752560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.752902] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.753256] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.753662] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.755322] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.755580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.771771] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.771853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.771977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.772101] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.772954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.773089] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.773199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.773328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.779688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.780818] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.780987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.781113] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.781254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.781411] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.781603] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [432.781626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [432.781785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.783377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.783524] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.783696] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.783848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.785317] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.809888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.812600] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.812911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.813222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.813945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.814253] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.814532] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.815071] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.816608] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.816928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.835339] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.835428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.835552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.835675] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.836596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.836760] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.836900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.837043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.842260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.843382] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.843548] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.843695] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.843847] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.843995] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.844196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.844347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [432.844392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [432.845705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.845872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.846046] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.846170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.847644] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.872199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.876778] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.877116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.877467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.878129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.878500] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.878877] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.879427] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.881107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.881235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.890420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.890529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.890649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.890801] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.891584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.891732] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.891880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.892026] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.896110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.897231] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.897393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.897519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.897643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.897818] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.898057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.898209] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [432.898253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [432.899691] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.899859] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.900021] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.900148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.901625] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.926193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.928760] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.929100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.929450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.930132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.930449] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.930773] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.931203] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.932643] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.932957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [432.944539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [432.944620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [432.944753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [432.944912] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [432.945717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [432.945873] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [432.945992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [432.946120] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [432.951336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [432.952487] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.952652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [432.952799] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.952955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [432.953106] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [432.953289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [432.953345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [432.953507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [432.954706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [432.954872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [432.955045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [432.955171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [432.956654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [432.981238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [432.983741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [432.984049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [432.984366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [432.985159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [432.985452] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [432.985743] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [432.986210] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [432.987788] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [432.988071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.005411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.005494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.033168] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [433.033177] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [433.033181] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [433.033183] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [433.033187] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [433.033190] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [433.033193] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [433.033196] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [433.033739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [433.033880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [433.034406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [433.034514] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [433.034531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.034672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.042050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.043198] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.043367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.043509] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.043649] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.043823] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.044053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.044204] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [433.044227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [433.045707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.045877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.046038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.046154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.047626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.072183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.074751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.074891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.075040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.075622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.075924] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.076237] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.076604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.077800] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.078059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.094232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.094314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.094434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.094557] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.095406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.095551] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.095674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.095846] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.102204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.103357] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.103533] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.103676] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.103826] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.104014] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.104198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [433.104221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [433.104356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.105705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.105869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.106043] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.106168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.107648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.132199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.134753] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.135054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.135370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.136157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.136454] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.136749] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.137152] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.138709] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.138990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.156322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.156400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.156524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.156647] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.157489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.157648] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.157790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.157959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.164311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.165443] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.165605] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.165759] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.165924] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.166073] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.166252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [433.166275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [433.166412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.167708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.167868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.168044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.168168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.169651] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.194285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.196722] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.197042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.197373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.198306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.198616] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.198933] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.199402] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.200875] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.201150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.217267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.217349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.217472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.217594] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.219570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.219715] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.219842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.219971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.225250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.226395] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.226540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.226688] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.226827] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.226971] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.227169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.227320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [433.227364] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [433.228704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.228871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.229045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.229170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.230652] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.255246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.257738] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.257918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.258103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.258592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.258953] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.259257] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.259705] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.261081] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.261374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.277575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.277657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.277793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.277929] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.278740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.278872] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.278993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.279133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.284349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.285479] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.285621] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.285767] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.285907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.286066] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.286244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [433.286286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.286450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [433.287705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.287870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.288043] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.288169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.289648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.314253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.316776] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.317116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.317469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.318120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.318443] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.318767] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.319182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.320663] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.320957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.336015] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.336095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.363961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [433.363971] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [433.363974] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [433.363977] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [433.363981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [433.363984] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [433.363987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [433.363990] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [433.364521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [433.364628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [433.365225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [433.365336] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [433.365353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.365492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.373806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.374971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.375118] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.375259] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.375395] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.375549] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.375743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [433.375766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [433.375904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.377374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.377534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.377715] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.377844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.379336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.403956] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.406704] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.406869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.407018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.407715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.407980] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.408223] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.408580] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.409564] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.409850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.427051] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.427134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.427256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.427376] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.428302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.428432] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.428558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.428718] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.435057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.436205] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.436347] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.436484] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.436620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.436789] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.436966] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [433.436989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [433.437128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.438709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.438875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.439052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.439166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.440631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.465188] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.467734] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.467903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.468080] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.468654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.469048] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.469375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.469846] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.471305] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.471597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.487825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.487907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.488023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.488144] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.488985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.489117] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.489227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.489359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.494586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.495731] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.495873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.496003] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.496128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.496277] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.496450] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [433.496492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.496652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [433.498158] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.498320] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.498479] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.498592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.500068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.524621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.527392] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.527768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.528136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.528804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.529127] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.529431] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.529876] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.531391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.531703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.547847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.547929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.548047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.548177] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.549013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.549149] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.549272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.549414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.555744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.556888] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.557032] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.557159] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.557285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.557431] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.557601] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [433.557624] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [433.557774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.559338] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.559500] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.559672] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.559807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.561293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.585895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.588730] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.589095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.589470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.590156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.590476] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.590801] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.591217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.592718] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.592974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.610274] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.610354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.610476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.610601] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.611431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.611564] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.611690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.611830] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.617032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.618183] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.618330] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.618456] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.618580] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.618733] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.618912] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [433.618955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.619118] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [433.620617] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.620789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.620959] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.621072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.622539] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.647119] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.649753] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.650118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.650493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.651356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.651729] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.652040] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.652458] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.653968] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.654273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.670479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.670560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.698582] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [433.698592] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [433.698595] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [433.698598] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [433.698602] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [433.698605] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [433.698608] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [433.698611] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [433.699066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [433.699179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [433.699821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [433.699932] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [433.699949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.700091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.708241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.709394] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.709540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.709685] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.709821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.709967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.710141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [433.710164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [433.710298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.711704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.711863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.712034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.712157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.713637] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.738293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.740711] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.740937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.741170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.741707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.742058] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.742333] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.742753] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.744196] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.744457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.760624] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.760734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.760871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.760993] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.762862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.763019] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.763134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.763265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.769655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.770810] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.770967] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.771093] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.771216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.771364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.771571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.771730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [433.771754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [433.773277] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.773440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.773614] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.773749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.775256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.799805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.802623] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.803015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.803389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.804124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.804522] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.804906] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.805390] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.807122] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.807439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.822542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.822624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.822762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.822929] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.823711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.823869] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.823991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.824134] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.830490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.831612] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.831785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.831930] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.832069] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.832228] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.832406] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [433.832429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [433.832562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.834129] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.834291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.834463] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.834586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.836068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.860712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.863464] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.863835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.864203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.864878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.865236] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.865521] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.865994] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.867481] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.867738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.884921] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.885003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.885123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.885242] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.886185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.886329] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.886456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.886602] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.891801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.892945] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.893105] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.893233] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.893360] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.893507] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.893694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [433.893740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.893929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [433.895375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.895542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.895719] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.895867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.897342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.921958] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.924731] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.925107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.925483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.926222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.926551] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.926901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.927378] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.928911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.929149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [433.944163] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [433.944249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [433.944372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [433.944494] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [433.945340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [433.945488] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [433.945613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [433.945787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [433.952155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [433.953295] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.953456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [433.953586] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.953733] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [433.953913] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [433.954135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [433.954287] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [433.954318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [433.955704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [433.955872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [433.956038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [433.956154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [433.957623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [433.982189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [433.984761] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [433.985084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [433.985423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [433.986272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [433.986584] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [433.986900] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [433.987359] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [433.989085] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [433.989368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.006625] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.006746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.034987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [434.034997] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [434.035001] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [434.035004] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [434.035008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [434.035011] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [434.035015] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [434.035019] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [434.035572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [434.035697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [434.036359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [434.036468] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [434.036485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.036622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.044436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.045621] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.045816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.045957] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.046085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.046235] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.046422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [434.046446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [434.046582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.048154] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.048331] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.048490] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.048603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.050095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.074701] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.077441] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.077768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.078096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.078792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.079154] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.079444] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.079911] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.081330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.081611] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.097831] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.097941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.098063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.098185] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.099003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.099157] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.099278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.099425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.104629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.105767] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.105926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.106054] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.106179] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.106331] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.106510] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [434.106554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.106723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [434.108251] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.108431] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.108593] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.108733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.110232] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.134800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.137560] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.137991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.138372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.139265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.139602] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.139941] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.140453] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.142012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.142259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.158399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.158481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.158606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.158750] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.159566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.159708] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.159851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.159995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.166319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.167476] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.167641] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.167789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.167945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.168092] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.168267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [434.168291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [434.168440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.169705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.169868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.170038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.170166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.171648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.195203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.197770] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.198109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.198464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.199184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.199527] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.199840] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.200301] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.201787] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.202085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.220576] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.220656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.220819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.220956] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.221747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.221886] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.222010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.222155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.227352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.228500] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.228641] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.228788] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.228925] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.229081] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.229271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [434.229315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.229467] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [434.230704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.230863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.231035] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.231160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.232633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.257198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.261823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.262179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.262530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.263212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.263569] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.263915] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.264383] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.266088] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.266384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.283646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.283798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.283928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.284051] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.284912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.285055] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.285177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.285327] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.290542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.291683] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.291842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.291969] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.292095] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.292240] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.292412] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [434.292457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.292620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [434.294130] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.294296] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.294469] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.294594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.296076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.320658] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.323412] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.323545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.323704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.324201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.324524] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.324862] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.325347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.326983] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.327230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.343311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.343423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.371250] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [434.371261] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [434.371264] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [434.371267] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [434.371270] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [434.371273] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [434.371276] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [434.371279] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [434.371995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [434.372133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [434.372871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [434.373013] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [434.373033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.373186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.380099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.381228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.381397] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.381540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.381687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.381874] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.382048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [434.382071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [434.382211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.383709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.383886] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.384047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.384161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.385633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.410172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.412748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.412940] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.413145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.413619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.413908] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.414204] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.414559] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.415835] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.416084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.432165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.432266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.432399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.432532] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.433427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.433570] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.433688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.433854] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.440208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.441342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.441503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.441634] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.441791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.441983] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.442197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.442346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [434.442368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [434.443708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.443864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.444030] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.444141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.445622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.470215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.472742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.472949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.473171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.473739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.474110] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.474401] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.474857] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.476307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.476574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.493827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.493906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.494027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.494150] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.495095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.495246] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.495358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.495490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.500702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.501827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.501992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.502123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.502249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.502401] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.502580] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [434.502627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.502799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [434.504325] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.504478] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.504652] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.504788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.506287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.530937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.533668] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.533955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.534309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.535070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.535404] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.535740] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.536221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.537780] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.538061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.554173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.554257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.554383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.554508] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.555439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.555574] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.555698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.555865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.562180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.563333] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.563495] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.563637] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.563798] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.563975] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.564163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [434.564187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [434.564330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.565706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.565870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.566039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.566163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.567634] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.592191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.594720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.595124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.595495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.596309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.596646] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.596992] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.597487] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.599089] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.599352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.616643] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.616758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.616900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.617022] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.617829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.617966] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.618076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.618205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.623426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.624546] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.624711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.624850] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.624975] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.625124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.625293] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [434.625340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.625500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [434.626707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.626893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.627067] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.627193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.628672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.653350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.655710] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.655949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.656201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.656909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.657253] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.657543] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.657993] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.659478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.659753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.675916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.676000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.704153] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [434.704163] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [434.704166] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [434.704169] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [434.704173] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [434.704176] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [434.704179] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [434.704182] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [434.704729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [434.704866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [434.705492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [434.705600] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [434.705618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.705769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.712667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.713805] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.713971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.714100] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.714226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.714378] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.714573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [434.714596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [434.714759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.716367] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.716522] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.716695] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.716845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.718314] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.742095] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.744741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.744947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.745156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.745670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.745994] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.746324] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.746731] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.748238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.748484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.765770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.765853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.765976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.766100] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.766947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.767099] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.767225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.767373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.773700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.774856] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.775024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.775167] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.775305] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.775462] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.775641] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [434.775665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [434.775813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.777380] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.777542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.777741] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.777887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.779343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.803198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.806769] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.807103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.807435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.808113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.808434] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.808778] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.809296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.810812] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.811097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.828438] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.828523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.828646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.828829] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.829643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.829797] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.829942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.830086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.835310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.836429] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.836594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.836746] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.836914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.837076] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.837276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.837428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [434.837473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [434.838706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.838913] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.839090] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.839219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.840693] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.865294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.867797] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.868194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.868598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.869526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.869940] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.870415] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.870979] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.872773] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.873122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.889250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.889337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.889460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.889598] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.890503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.890689] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.890811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.890957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.897286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.898449] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.898596] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.898758] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.898894] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.899044] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.899235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.899372] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [434.899394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [434.900708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.900901] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.901094] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.901211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.902672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.927240] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.929785] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.930125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.930477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.931138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.931463] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.931781] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.932201] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.934018] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.934361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [434.951767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [434.951857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [434.951993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [434.952128] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [434.952933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [434.953064] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [434.953189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [434.953335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [434.958531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [434.959673] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.959826] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [434.959962] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.960086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [434.960230] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [434.960418] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [434.960464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [434.960630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [434.962135] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [434.962293] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [434.962460] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [434.962586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [434.964075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [434.988634] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [434.991398] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [434.991774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [434.992143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [434.992978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [434.993306] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [434.993606] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [434.994070] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [434.995581] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [434.995834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.010851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.010958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.039001] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [435.039011] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [435.039015] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [435.039018] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [435.039022] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [435.039025] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [435.039028] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [435.039032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [435.039586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [435.039717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [435.040367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [435.040482] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [435.040500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.040641] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.048639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.049764] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.049932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.050063] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.050188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.050339] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.050526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [435.050549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [435.050701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.052290] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.052454] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.052627] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.052764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.054274] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.078859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.081664] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.082006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.082335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.083075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.083396] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.083708] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.084148] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.085651] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.085947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.105466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.105580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.105735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [435.105874] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [435.106714] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [435.106850] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [435.106976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.107122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.112341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.113475] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.113635] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.113804] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.113969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.114169] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.114379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <6> [435.114486] [IGT] i915_pm_rpm: finished subtest basic-rte, FAIL <7> [435.114512] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [435.114544] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [435.115706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.115899] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.116071] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.116198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.117673] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.142154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.144694] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.144832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.144978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.145340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.145487] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.145613] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.145891] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.146603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.146736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.161667] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.161834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.161966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [435.162716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.163879] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.164039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.164180] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.164320] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.164460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [435.164589] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.164721] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.165934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.166097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.166758] [drm:drm_mode_setcrtc] [CRTC:167:pipe B] <7> [435.166761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [435.173900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.175054] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.175231] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.175371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.175510] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.175672] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.175957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.177549] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.177728] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.177904] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.178030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.179641] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.204272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.206724] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.206989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.207263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.207834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.208089] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.208327] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.208668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.210126] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.210355] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.227629] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.227739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.227867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [435.227993] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [435.228793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [435.228940] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [435.229058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.229190] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.234392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.235535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.235685] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.235825] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.235955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.236100] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.236311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.236464] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [435.236510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [435.237705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.237868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.238042] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.238169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.239646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.264195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.268799] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.269123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.269453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.270083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.270388] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.270675] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.271103] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.272601] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.272928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.288010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.288088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.288211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [435.288332] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [435.289171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [435.289304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [435.289415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.289549] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.295890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.297051] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.297195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.297335] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.297471] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.297628] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.297816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [435.297840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [435.297982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.299541] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.299708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.299878] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.299995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.302671] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.327333] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.329760] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.330012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.330272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.330900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.331229] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.331531] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.332037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.333655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.333966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.350167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.350280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.350399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [435.350522] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [435.351327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [435.351469] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [435.351592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.351770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.356964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.358114] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.358256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.358392] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.358528] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.358688] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.358864] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [435.358907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.360378] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.360529] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.360707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.360829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.362302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.386944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.389712] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.389968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.390317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.391183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.391501] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.391845] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.392235] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.393770] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.394055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.410251] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.410369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.410483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [435.411309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.412475] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.412620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.412771] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.412912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.413042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [435.413158] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.413266] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.414434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.414569] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.416750] [drm:drm_mode_setcrtc] [CRTC:236:pipe C] <7> [435.416779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [435.420137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.421285] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.421424] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.421557] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.421692] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.421853] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.422095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.423652] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.423824] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.423985] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.424104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.425578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.450240] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.452740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.452915] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.453100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.453554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.453879] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.454152] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.454532] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.455989] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.456262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.473492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.473578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.501472] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [435.501481] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [435.501484] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [435.501487] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [435.501491] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [435.501494] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [435.501497] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [435.501501] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [435.502037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [435.502153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [435.502670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [435.502797] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [435.502814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.502954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.510434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.511579] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.511728] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.511867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.511992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.512142] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.512329] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [435.512351] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [435.512492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.514085] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.514258] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.514415] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.514527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.516743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.541279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.543757] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.544082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.544413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.545215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.545517] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.545811] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.546196] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.547574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.547855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.564050] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.564154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.564277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [435.564403] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [435.565215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [435.565345] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [435.565469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.565613] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.571948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.573097] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.573240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.573379] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.573520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.573686] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.573869] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [435.573918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.575377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.575535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.575709] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.575832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.577302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.601967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.604725] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.605148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.605573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.606232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.606594] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.607075] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.607555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.609112] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.609446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.626711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.626861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.626990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [435.627852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.629027] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.629172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.629320] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.629458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.629596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [435.629737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.629866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.631041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.631229] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.632253] [drm:drm_mode_setcrtc] [CRTC:305:pipe D] <7> [435.632271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [435.637904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.639030] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.639180] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.639319] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.639460] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.639618] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.639867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.641375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.641523] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.641694] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.641822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.643312] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.668039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.670720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.671034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.671365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.672118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.672428] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.672747] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.673231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.674758] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.675032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.693432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.693519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.693644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [435.693786] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [435.694672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [435.694824] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [435.694974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.695111] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.701441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.702590] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.702780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.702915] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.703042] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.703189] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.703359] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [435.703381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [435.703567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.705174] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.705340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.705508] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.705625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.707105] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.731735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.734492] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.734964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.735343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.736072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.736544] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.736912] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.737393] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.738947] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.739277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.757707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.757798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.757922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [435.758045] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [435.758956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [435.759091] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [435.759204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.759335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.764543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.765695] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.765836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.765962] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.766087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.766235] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.766417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [435.766459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.767705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.767862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.768029] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.768153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.769625] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.794229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.796726] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.797122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.797487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.798196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.798546] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.798880] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.799345] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.800874] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.801165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.817250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.817366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.817477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [435.818394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.819564] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.819732] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.819873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.820001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.820126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [435.820242] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.820353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.821515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.821698] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.823720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [435.827232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.828376] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.828532] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.828676] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.828828] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.828988] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.829213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.830710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.830872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.831034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.831147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.832692] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.857283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.861822] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.862160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.862521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.863381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.863800] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.864198] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.864673] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.866468] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.866820] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.883052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.883135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.883255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [435.883378] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [435.884237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [435.884383] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [435.884503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.884647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.890994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.892142] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.892306] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.892448] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.892585] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.892761] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.892987] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [435.893017] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [435.893140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.894721] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.894884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.895055] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.895177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.897734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [435.922380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [435.926791] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [435.927201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [435.927571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [435.928415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [435.928801] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [435.929153] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [435.929622] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [435.931852] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [435.932215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [435.949617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [435.949725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [435.977454] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [435.977463] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [435.977467] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [435.977469] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [435.977473] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [435.977476] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [435.977479] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [435.977482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [435.978023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [435.978163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [435.978862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [435.978996] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [435.979013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [435.979157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [435.987307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [435.988488] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.988661] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [435.988810] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.988984] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [435.989170] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [435.989378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [435.989536] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [435.989566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [435.991078] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [435.991241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [435.991411] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [435.991537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [435.993034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.017624] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.022821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.023221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.023597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.024380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.024787] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.025240] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.025879] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.027563] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.027932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.046366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.046452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.046575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.046716] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.047611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.047768] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.047916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.048063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.053257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.054405] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.054572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.054722] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.054889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.055049] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.055251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.055405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [436.055449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [436.056708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.056872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.057034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.057150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.059759] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.084465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.088824] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.089198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.089572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.090308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.090669] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.091058] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.091611] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.093492] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.093859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.112393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.112505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.112625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.112777] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.113583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.113722] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.113875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.114025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.119248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.120367] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.120530] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.120673] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.120825] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.121020] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.121206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [436.121250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.121404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [436.122707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.122878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.123052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.123182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.125748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.150389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.152741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.152968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.153202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.153750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.154172] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.154498] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.154993] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.156783] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.157106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.174483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.174586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.174737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.174906] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.175707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.175865] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.175991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.176135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.182462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.183613] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.183786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.183926] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.184069] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.184229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.184406] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [436.184429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [436.184564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.186132] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.186295] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.186467] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.186594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.189379] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.214039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.218816] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.219196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.219571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.220305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.220667] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.221058] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.221613] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.223428] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.223781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.241076] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.241184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.241303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.241428] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.242342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.242491] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.242612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.242768] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.249124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.250278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.250445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.250586] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.250735] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.250918] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.251095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [436.251127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [436.251263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.252707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.252876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.253050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.253175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.255739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.280354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.284792] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.285165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.285534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.286372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.286762] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.287091] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.287567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.289355] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.289717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.305975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.306089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.334090] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [436.334100] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [436.334103] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [436.334106] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [436.334110] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [436.334113] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [436.334116] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [436.334119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [436.334674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [436.334794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [436.335441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [436.335554] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [436.335571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.335721] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.342577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.343733] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.343899] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.344040] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.344177] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.344336] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.344520] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [436.344543] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [436.344692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.346296] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.346457] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.346629] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.346763] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.349601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.374164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.376779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.377148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.377523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.378278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.378633] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.379001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.379536] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.381604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.381918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.399195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.399278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.399402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.399523] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.400453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.400597] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.400729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.400892] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.406089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.407228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.407390] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.407528] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.407665] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.407836] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.408042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [436.408085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.408248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [436.409706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.409888] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.410048] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.410159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.411625] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.436211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.438764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.439084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.439416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.440178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.440487] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.440796] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.441221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.442953] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.443246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.459440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.459524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.459643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.459789] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.460594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.460748] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.460894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.461041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.467390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.468520] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.468689] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.468845] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.468970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.469134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.469309] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [436.469333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [436.469477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.471041] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.471205] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.471378] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.471504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.473748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.498343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.500759] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.501060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.501376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.502087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.502385] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.502661] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.503124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.504578] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.504875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.522203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.522305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.522436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.522572] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.523394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.523550] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.523672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.523829] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.529052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.530189] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.530365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.530507] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.530645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.530816] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.531040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.531200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [436.531246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [436.532691] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.532854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.533025] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.533149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.534628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.559200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.561771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.562150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.562496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.563182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.563492] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.563805] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.564260] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.565847] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.566102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.583411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.583496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.583615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.583768] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.584573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.584722] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.584868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.585014] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.591367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.592486] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.592653] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.592807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.592966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.593112] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.593297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [436.593330] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [436.593468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.594704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.594865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.595039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.595169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.596649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.621242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.623747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.624006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.624279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.625021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.625354] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.625667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.626167] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.627699] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.627962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.645266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.645350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.673207] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [436.673217] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [436.673220] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [436.673223] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [436.673226] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [436.673229] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [436.673232] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [436.673236] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [436.673862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [436.673975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [436.674598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [436.674714] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [436.674731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.674874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.684157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.685308] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.685473] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.685601] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.685745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.685922] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.686107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [436.686130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [436.686270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.687705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.687867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.688040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.688170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.689653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.714267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.716782] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.717146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.717520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.718341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.718652] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.718972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.719425] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.720919] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.721200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.737404] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.737486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.737610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.737770] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.738574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.738722] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.738863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.739011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.745370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.746499] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.746661] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.746808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.746962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.747108] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.747291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [436.747315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [436.747451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.748705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.748865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.749039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.749164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.751756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.776388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.778734] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.779079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.779430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.780229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.780557] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.780901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.781399] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.783102] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.783410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.799640] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.799745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.799869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.799988] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.800820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.800971] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.801093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.801236] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.806450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.807575] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.807741] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.807883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.808008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.808162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.808353] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [436.808395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.808553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [436.810064] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.810227] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.810402] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.810528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.812737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.837382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.839740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.840083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.840433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.841245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.841617] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.841980] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.842476] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.844294] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.844577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.859639] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.859744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.859871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.859990] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.860820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.860968] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.861091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.861241] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.867564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.868716] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.868881] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.869023] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.869162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.869321] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.869494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [436.869518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [436.869654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.871228] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.871394] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.871565] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.871694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.874489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.899076] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.903823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.904227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.904626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.905408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.905816] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.906221] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.906745] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.908543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.908913] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.925159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.925243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [436.925367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [436.925488] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [436.926323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [436.926474] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [436.926586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [436.926744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [436.934239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [436.935384] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.935552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [436.935706] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.935861] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [436.936006] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [436.936183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [436.936215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [436.936361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [436.937706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [436.937873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [436.938047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [436.938176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [436.939658] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [436.964302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [436.966722] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [436.967084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [436.967453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [436.968205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [436.968559] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [436.968922] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [436.969396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [436.971255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [436.971572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [436.988889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [436.988970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.017033] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [437.017043] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [437.017047] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [437.017050] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [437.017054] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [437.017057] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [437.017060] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [437.017064] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [437.017597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [437.017726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [437.018368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [437.018482] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [437.018499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.018639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.025627] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.026774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.026937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.027068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.027195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.027348] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.027526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [437.027549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [437.027677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.029285] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.029448] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.029606] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.029736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.032531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.057015] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.059770] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.060002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.060284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.060914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.061237] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.061509] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.061981] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.063415] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.063669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.079860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.079941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.080063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.080186] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.081040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.081177] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.081293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.081425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.087769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.088905] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.089067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.089196] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.089323] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.089474] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.089651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [437.089674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [437.089822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.091378] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.091542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.091720] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.091867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.094661] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.119278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.123834] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.124212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.124587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.125331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.125710] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.126079] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.126552] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.128375] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.128730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.146052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.146133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.146255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.146376] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.147322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.147462] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.147570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.147734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.154118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.155237] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.155402] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.155542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.155686] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.155869] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.156049] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [437.156073] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [437.156208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.157707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.157870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.158044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.158172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.160754] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.185361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.189786] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.190162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.190544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.191294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.191659] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.192043] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.192573] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.194370] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.194714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.212017] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.212099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.212220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.212345] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.213281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.213416] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.213528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.213658] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.220037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.221144] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.221314] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.221456] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.221594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.221770] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.221989] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [437.222013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [437.222151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.223707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.223866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.224022] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.224137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.226741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.251335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.255825] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.256200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.256577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.257309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.257662] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.258025] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.258561] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.260411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.260769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.278136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.278217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.278335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.278455] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.279315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.279449] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.279560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.279703] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.284925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.286049] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.286213] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.286351] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.286490] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.286650] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.286841] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [437.286895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.287072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [437.288576] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.288760] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.288926] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.289041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.291748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.316325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.318762] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.319086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.319419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.320179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.320490] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.320804] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.321240] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.322849] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.323127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.341504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.341585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.369383] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [437.369393] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [437.369396] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [437.369399] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [437.369403] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [437.369406] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [437.369409] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [437.369412] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [437.370047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [437.370183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [437.370896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [437.371029] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [437.371046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.371186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.378248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.379395] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.379565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.379718] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.379873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.380026] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.380228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.380389] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [437.380409] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [437.381708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.381876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.382045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.382163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.384739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.409315] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.413812] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.414129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.414449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.415146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.415467] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.415775] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.416243] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.417781] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.418047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.434232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.434315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.434435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.434560] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.435410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.435547] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.435659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.435835] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.442197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.443344] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.443509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.443648] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.443803] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.443994] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.444198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.444348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [437.444371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [437.445706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.445874] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.446050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.446176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.448740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.473331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.477828] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.478208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.478582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.479324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.479706] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.480078] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.480539] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.482327] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.482661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.498829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.498912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.499035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.499159] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.500087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.500237] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.500348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.500478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.507980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.509101] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.509267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.509398] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.509523] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.509670] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.509857] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [437.509890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [437.510062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.511622] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.511793] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.511955] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.512067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.513532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.538142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.540766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.541101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.541452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.542155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.542483] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.542820] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.543260] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.544889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.545189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.562465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.562549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.562671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.562824] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.563729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.563895] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.564023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.564159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.569364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.570515] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.570676] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.570821] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.570980] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.571131] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.571316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [437.571359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.571514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [437.572705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.572873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.573047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.573168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.575747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.600373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.602777] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.603141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.603509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.604265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.604614] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.604971] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.605467] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.607203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.607519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.623697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.623789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.623915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.624040] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.624950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.625106] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.625234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.625380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.631733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.632853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.633019] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.633145] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.633269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.633413] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.633594] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [437.633626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [437.633787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.635400] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.635558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.635739] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.635874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.637344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.661178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.663768] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.664133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.664487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.665274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.665608] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.665954] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.666449] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.668006] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.668272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.685597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.685677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.713447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [437.713458] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [437.713462] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [437.713465] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [437.713469] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [437.713472] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [437.713476] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [437.713480] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [437.713988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [437.714107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [437.714631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [437.714744] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [437.714761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.714901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.723403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.724542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.724715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.724857] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.724995] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.725154] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.725346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [437.725368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [437.725503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.727075] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.727243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.727412] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.727526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.729741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.754332] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.756765] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.757105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.757455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.758173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.758499] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.758812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.759265] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.760725] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.761011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.777114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.777223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.777341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.777462] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.778372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.778525] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.778639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.778798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.785176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.786308] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.786454] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.786607] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.786765] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.786938] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.787107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [437.787129] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [437.787255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.788709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.788883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.789040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.789169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.790640] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.815225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.819775] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.820112] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.820465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.821126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.821447] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.821771] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.822161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.823961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.824334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.842824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.842907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.843031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.843154] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.844075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.844210] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.844324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.844456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.849670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.850817] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.850976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.851101] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.851227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.851371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.851548] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [437.851592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.851762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [437.853264] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.853423] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.853595] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.853724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.855208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.879782] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.882537] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.882702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.882871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.883671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.884050] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.884386] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.884862] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.886579] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.886914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.902007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.902088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.902205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.902328] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.903167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.903300] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.903409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.903538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.909898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.911048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.911216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.911343] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.911469] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.911615] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.911813] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [437.911848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [437.912005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.913567] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.913732] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.913895] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.914010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.915341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [437.939977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [437.942748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [437.942993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [437.943300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [437.944144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [437.944472] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [437.944797] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [437.945283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [437.946767] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [437.947044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [437.963236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [437.963319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [437.963444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [437.963564] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [437.964400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [437.964547] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [437.964659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [437.964833] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [437.970089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [437.971224] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.971383] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [437.971512] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.971641] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [437.971816] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [437.972027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [437.972069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [437.972231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [437.973705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [437.973865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [437.974029] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [437.974143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [437.975610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.000168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.002741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.002976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.003216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.003880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.004246] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.004549] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.005072] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.006704] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.006966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.022009] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.022090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.050218] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [438.050228] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [438.050231] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [438.050234] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [438.050238] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [438.050241] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [438.050244] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [438.050247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [438.050900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [438.051016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [438.051636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [438.051754] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [438.051771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.051916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.058833] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.059971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.060140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.060270] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.060397] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.060546] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.060722] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [438.060755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [438.060903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.062374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.062538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.062707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.062852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.064325] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.088901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.091656] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.091937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.092211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.092760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.093066] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.093301] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.093649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.094945] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.095182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.112391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.112472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.112597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.112740] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.113636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.113794] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.113939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.114078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.120394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.121546] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.121721] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.121856] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.121980] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.122124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.122296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [438.122319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [438.122456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.123705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.123871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.124033] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.124151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.125632] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.150213] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.152772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.153139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.153517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.154349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.154754] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.155129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.155577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.157133] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.157437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.173686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.173797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.173919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.174039] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.174852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.174994] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.175107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.175238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.181562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.182713] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.182878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.183009] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.183136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.183282] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.183492] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [438.183512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [438.183648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.185230] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.185403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.185578] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.185698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.187205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.211779] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.214563] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.214934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.215284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.216216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.216564] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.216923] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.217428] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.219556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.219824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.235998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.236081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.236202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.236321] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.238223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.238367] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.238492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.238631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.243892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.245037] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.245204] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.245334] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.245462] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.245608] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.245796] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [438.245849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.246008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [438.247377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.247545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.247734] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.247881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.249341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.273957] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.276706] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.276924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.277159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.277808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.278197] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.278505] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.279013] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.280611] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.280889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.297067] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.297152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.297272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.297394] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.299297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.299445] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.299570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.299737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.306121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.307248] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.307393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.307530] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.307669] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.307848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.308054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.308206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [438.308238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [438.309720] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.309879] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.310038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.310151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.311616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.336185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.340823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.341230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.341627] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.342360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.342784] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.343160] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.343660] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.345408] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.345752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.361928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.362011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.389965] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [438.389974] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [438.389978] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [438.389981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [438.389984] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [438.389987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [438.389990] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [438.389993] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [438.390522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [438.390629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [438.391264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [438.391373] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [438.391390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.391530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.398608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.399757] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.399901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.400042] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.400181] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.400341] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.400523] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [438.400545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [438.400689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.402250] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.402412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.402585] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.402722] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.404204] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.428829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.431652] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.432023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.432369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.432988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.433295] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.433583] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.434006] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.435436] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.435705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.451879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.451961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.452082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.452203] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.453039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.453173] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.453298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.453443] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.458660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.459808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.459953] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.460091] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.460226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.460384] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.460569] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [438.460610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.460779] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [438.462279] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.462440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.462608] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.462743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.464220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.488814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.493819] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.494197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.494570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.495265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.495618] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.495993] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.496461] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.498261] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.498614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.516007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.516095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.516215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.516339] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.517172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.517306] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.517429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.517571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.522775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.523910] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.524052] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.524193] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.524333] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.524491] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.524673] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [438.524738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.524895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [438.526373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.526529] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.526703] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.526831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.528313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.552932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.557827] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.558228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.558604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.559505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.559899] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.560253] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.560768] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.562619] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.562994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.579237] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.579345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.579466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.579586] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.581451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.581583] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.581719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.581868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.587126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.588278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.588422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.588560] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.588710] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.588870] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.589042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [438.589099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.589257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [438.590719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.590880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.591052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.591174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.592651] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.617252] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.619774] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.620134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.620511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.621201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.621552] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.621901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.622369] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.624185] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.624500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.641810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.641892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.642016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.642138] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.643058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.643199] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.643320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.643460] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.649799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.650942] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.651086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.651228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.651367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.651529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.651709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [438.651740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [438.651875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.653380] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.653545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.653742] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.653870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.655343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.680062] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.684823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.685225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.685622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.686349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.686764] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.687120] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.687587] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.689338] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.689695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.708152] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.708235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.736258] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [438.736268] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [438.736271] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [438.736274] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [438.736278] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [438.736281] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [438.736284] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [438.736287] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [438.737026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [438.737148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [438.737957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [438.738072] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [438.738089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.738231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.744860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.746001] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.746150] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.746293] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.746430] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.746587] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.746777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [438.746800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [438.746938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.748374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.748536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.748715] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.748839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.750319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.774887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.777649] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.777999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.778333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.779028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.779325] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.779596] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.780049] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.781487] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.781760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.797907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.797991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.798110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.798232] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.799085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.799228] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.799354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.799498] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.805854] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.806976] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.807140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.807278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.807414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.807575] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.807782] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [438.807813] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [438.807984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.809545] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.809739] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.809913] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.810039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.811515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.836162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.838751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.839024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.839318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.840109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.840465] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.840827] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.841355] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.843150] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.843482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.860887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.860973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.861096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.861219] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.862062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.862216] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.862338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.862479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.867689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.868820] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.868992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.869136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.869275] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.869434] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.869614] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [438.869658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.869829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [438.871372] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.871540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.871727] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.871872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.873366] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.897998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.900715] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.901082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.901452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.902438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.902836] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.903180] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.903632] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.905702] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.906033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.923406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.923490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.923611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.923761] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.925645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.925814] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.925939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.926083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.931317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.932459] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.932620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.932766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.932923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.933085] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.933265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [438.933313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.933470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [438.934719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.934887] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.935058] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.935186] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.936669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [438.961245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [438.963749] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [438.964110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [438.964487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [438.965313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [438.965665] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [438.966040] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [438.966536] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [438.968546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [438.968906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [438.985147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [438.985232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [438.985354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [438.985476] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [438.986309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [438.986470] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [438.986594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [438.986768] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [438.993093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [438.994246] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.994391] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [438.994533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.994671] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [438.994851] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [438.995032] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [438.995065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [438.995205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [438.996719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [438.996880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [438.997049] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [438.997171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [438.998647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.023236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.025780] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.026143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.026515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.027262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.027608] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.027981] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.028515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.030284] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.030602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.049073] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.049157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.077119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [439.077130] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [439.077133] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [439.077136] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [439.077140] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [439.077144] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [439.077147] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [439.077151] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [439.077691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [439.077846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [439.078443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [439.078553] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [439.078570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.078723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.085775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.086920] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.087087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.087228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.087365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.087524] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.087707] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [439.087732] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [439.087871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.089380] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.089544] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.089730] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.089869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.091350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.115998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.118730] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.118984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.119254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.120033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.120379] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.120729] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.121211] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.122830] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.123121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.140382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.140463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.140583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.140720] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.141626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.141775] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.141915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.142060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.148392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.149555] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.149724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.149864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.149999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.150161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.150341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [439.150363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [439.150501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.152068] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.152241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.152415] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.152544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.154030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.178616] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.181381] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.181765] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.182142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.182831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.183237] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.183597] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.184124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.185878] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.186196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.203565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.203648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.203808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.203968] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.204763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.204918] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.205041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.205192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.210397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.211538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.211706] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.211845] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.212001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.212162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.212350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [439.212393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.212553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [439.214064] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.214225] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.214393] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.214520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.216023] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.240632] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.243473] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.243816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.244209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.245030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.245403] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.245789] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.246333] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.248316] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.248663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.264979] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.265063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.265190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.265315] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.266162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.266304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.266426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.266576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.272907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.274072] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.274234] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.274376] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.274518] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.274687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.274890] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [439.274914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [439.275054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.276617] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.276808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.276980] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.277105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.278584] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.303234] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.305741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.305935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.306139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.306620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.307004] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.307399] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.307920] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.309750] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.310077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.328502] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.328584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.328733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.328893] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.329758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.329914] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.330036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.330179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.336516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.337690] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.337851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.337991] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.338131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.338293] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.338478] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [439.338511] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [439.338643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.340220] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.340385] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.340557] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.340692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.342195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.366842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.371783] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.372184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.372579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.373358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.373785] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.374189] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.374668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.376588] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.376974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.394284] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.394390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.422193] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [439.422203] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [439.422207] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [439.422210] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [439.422214] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [439.422217] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [439.422220] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [439.422224] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [439.422939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [439.423095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [439.423931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [439.424062] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [439.424078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.424220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.431046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.432179] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.432344] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.432487] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.432626] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.432799] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.433026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.433177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [439.433201] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [439.434709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.434877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.435052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.435179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.436667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.461245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.463732] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.463886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.464047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.464487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.464874] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.465277] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.465735] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.467526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.467826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.482892] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.482999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.483121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.483241] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.484072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.484218] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.484343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.484487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.490839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.491961] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.492123] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.492250] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.492377] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.492527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.492721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [439.492744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [439.492907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.494376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.494539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.494719] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.494871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.496341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.520904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.523720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.523931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.524148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.524771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.525162] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.525457] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.525938] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.527415] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.527696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.543877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.543957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.544076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.544196] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.546109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.546256] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.546370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.546501] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.551801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.552930] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.553090] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.553228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.553365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.553522] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.553703] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [439.553745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.553928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [439.555375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.555537] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.555708] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.555864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.557340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.581977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.586825] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.587203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.587573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.588309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.588667] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.589017] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.589521] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.591312] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.591595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.607813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.607895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.608014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.608133] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.608991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.609138] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.609263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.609409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.615735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.616884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.617050] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.617180] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.617305] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.617448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.617622] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [439.617646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [439.617799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.619377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.619541] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.619711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.619861] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.621337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.645964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.648729] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.649005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.649308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.650127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.650441] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.650751] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.651168] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.652572] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.652851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.670164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.670247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.670370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.670496] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.671354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.671484] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.671598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.671762] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.678144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.679265] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.679426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.679552] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.679675] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.679845] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.680070] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [439.680102] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [439.680240] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.681705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.681884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.682046] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.682165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.683632] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.708234] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.710748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.710989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.711240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.712022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.712370] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.712674] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.713128] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.714792] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.715080] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.730144] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.730244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.758233] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [439.758243] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [439.758247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [439.758250] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [439.758254] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [439.758257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [439.758261] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [439.758265] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [439.758923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [439.759040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [439.759662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [439.759781] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [439.759798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.759935] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.769014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.770175] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.770316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.770453] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.770607] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.770780] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.770960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [439.770984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [439.771126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.772690] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.772847] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.773003] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.773120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.774590] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.799238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.801757] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.802017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.802290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.802915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.803231] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.803513] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.803952] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.805519] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.805775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.822977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.823083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.823211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.823343] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.824245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.824399] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.824523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.824666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.829881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.831030] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.831192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.831330] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.831467] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.831629] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.831830] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [439.831886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.832051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [439.833553] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.833727] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.833894] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.834006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.836668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.861294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.863737] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.863909] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.864088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.864579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.864960] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.865375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.865909] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.867459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.867785] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.885135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.885218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.885338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.885458] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.886322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.886459] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.886568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.886708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.893078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.894243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.894405] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.894534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.894659] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.894836] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.895044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [439.895068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [439.895204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.896710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.896871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.897041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.897167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.898649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.923216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.925708] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.925883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.926066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.926532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.926911] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.927317] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.927786] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.929541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.929869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [439.947136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [439.947216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [439.947338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [439.947459] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [439.948405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [439.948545] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [439.948658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [439.948812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [439.955169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [439.956307] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.956470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [439.956612] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.956766] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [439.956947] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [439.957128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [439.957152] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [439.957288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [439.958709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [439.958875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [439.959047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [439.959174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [439.960650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [439.985269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [439.987748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [439.988021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [439.988327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [439.989167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [439.989498] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [439.989831] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [439.990325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [439.991826] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [439.992108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.007175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.007256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.007379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.007505] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.008349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.008493] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.008616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.008792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.015149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.016300] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.016461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.016602] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.016750] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.016928] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.017108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [440.017140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [440.017274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.018707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.018871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.019039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.019152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.020621] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.045181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.047740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.047897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.048066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.048517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.048893] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.049310] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.049747] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.051547] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.051875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.069232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.069316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.097204] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [440.097215] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [440.097218] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [440.097221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [440.097224] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [440.097227] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [440.097230] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [440.097233] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [440.097953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [440.098097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [440.098905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [440.099038] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [440.099055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.099196] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.107029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.108180] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.108347] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.108489] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.108626] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.108809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.109010] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [440.109036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [440.109178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.110705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.110870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.111026] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.111136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.112603] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.137153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.139761] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.140067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.140379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.141034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.141329] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.141602] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.142041] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.143744] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.144010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.162394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.162476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.162599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.162750] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.163642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.163802] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.163953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.164083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.170408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.171575] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.171726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.171859] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.171985] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.172130] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.172315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [440.172338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [440.172473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.173704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.173864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.174026] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.174146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.175608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.200197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.204816] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.205171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.205521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.206188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.206522] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.206852] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.207257] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.208975] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.209325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.225493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.225575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.225706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.225845] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.226743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.226881] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.227001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.227146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.233481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.234624] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.234777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.234910] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.235035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.235179] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.235370] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [440.235394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [440.235555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.237129] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.237287] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.237454] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.237572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.239047] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.263533] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.267825] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.268202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.268576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.269271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.269617] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.269977] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.270423] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.272193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.272507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.289811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.289891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.290010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.290135] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.291064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.291197] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.291320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.291461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.296658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.297802] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.297951] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.298091] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.298230] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.298387] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.298561] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [440.298604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.298770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [440.300270] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.300435] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.300610] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.300744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.302225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.326800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.329599] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.329989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.330362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.331209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.331562] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.331928] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.332381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.334050] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.334375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.349481] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.349563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.349692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.349825] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.350639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.350782] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.350903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.351039] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.357373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.358519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.358663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.358807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.358947] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.359091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.359292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.359448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [440.359479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [440.360707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.360867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.361037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.361162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.362641] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.387189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.389747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.389969] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.390204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.390802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.391138] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.391444] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.391899] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.393507] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.393779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.412146] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.412226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.440086] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [440.440096] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [440.440099] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [440.440102] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [440.440105] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [440.440108] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [440.440111] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [440.440115] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [440.440647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [440.440778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [440.441301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [440.441414] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [440.441430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.441572] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.450118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.451264] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.451408] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.451549] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.451694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.451851] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.452037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [440.452061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [440.452197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.453705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.453871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.454034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.454147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.455614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.480176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.482773] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.483096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.483433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.484130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.484459] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.484779] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.485264] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.486994] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.487269] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.502276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.502356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.502479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.502600] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.503442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.503595] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.503731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.503904] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.511368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.512517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.512690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.512851] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.512988] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.513144] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.513327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [440.513350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [440.513493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.515068] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.515232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.515388] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.515499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.517739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.542381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.546771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.547133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.547507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.548337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.548719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.549106] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.549595] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.551389] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.551744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.569038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.569122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.569246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.569371] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.570305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.570444] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.570556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.570701] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.577094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.578230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.578377] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.578507] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.578632] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.578793] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.578972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [440.578995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [440.579132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.580707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.580871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.581029] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.581145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.582611] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.607211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.609742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.609910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.610088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.610549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.610932] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.611262] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.611746] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.613426] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.613730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.630986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.631067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.631187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.631306] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.632238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.632369] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.632481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.632614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.637827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.638985] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.639129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.639266] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.639404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.639566] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.639745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [440.639787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.639943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [440.641377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.641534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.641707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.641834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.643315] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.667983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.670733] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.671075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.671425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.672083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.672398] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.672711] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.673088] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.674511] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.674795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.690894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.690998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.691115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.691235] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.692144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.692278] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.692391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.692524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.698877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.700023] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.700164] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.700301] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.700435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.700589] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.700777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [440.700808] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [440.700948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.702376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.702536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.702712] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.702834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.704312] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.728882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.731614] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.731994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.732368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.733022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.733352] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.733661] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.734128] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.735638] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.735919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.753113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.753190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.781052] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [440.781062] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [440.781065] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [440.781068] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [440.781071] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [440.781074] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [440.781077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [440.781080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [440.781608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [440.781741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [440.782393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [440.782501] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [440.782518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.782658] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.790991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.792169] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.792319] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.792460] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.792597] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.792766] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.792949] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [440.792973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [440.793112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.794672] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.794853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.795010] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.795123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.796595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.821182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.823759] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.824102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.824455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.825186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.825479] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.825766] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.826127] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.827487] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.827743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.843870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.843949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.844072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.844195] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.845034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.845173] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.845295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.845441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.850635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.851796] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.851941] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.852069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.852193] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.852347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.852534] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [440.852581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.852743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [440.854244] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.854393] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.854559] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.854669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.856170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.880748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.883464] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.883609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.883892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.884515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.884858] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.885178] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.885622] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.887244] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.887500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.904740] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.904827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.904951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.905074] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.905991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.906126] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.906248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.906390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.912705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.913869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.914016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.914157] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.914293] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.914449] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.914630] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [440.914653] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [440.914809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.916374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.916533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.916709] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.916831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.918296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [440.942905] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [440.945712] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [440.945944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [440.946270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [440.947067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [440.947395] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [440.947718] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [440.948111] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [440.949698] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [440.949996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [440.966125] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [440.966205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [440.966325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [440.966447] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [440.967374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [440.967504] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [440.967618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [440.967767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [440.972971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [440.974115] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.974256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [440.974381] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.974507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [440.974655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [440.974843] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [440.974886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [440.975064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [440.976563] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [440.976735] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [440.976910] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [440.977033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [440.979685] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.004242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.008766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.009127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.009502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.010197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.010545] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.010893] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.011354] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.013032] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.013347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.030720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.030815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.030935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.031054] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.031885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.032016] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.032128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.032260] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.038596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.039780] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.039923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.040047] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.040171] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.040313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.040491] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [441.040523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [441.040674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.042249] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.042411] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.042572] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.042700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.044180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.068762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.071576] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.071980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.072334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.073217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.073541] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.073867] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.074269] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.075736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.075991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.093228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.093308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.121267] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [441.121277] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [441.121280] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [441.121283] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [441.121287] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [441.121290] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [441.121293] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [441.121296] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [441.121928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [441.122045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [441.122639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [441.122761] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [441.122778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.122918] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.131211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.132364] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.132507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.132634] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.132782] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.132947] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.133149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.133303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [441.133326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [441.134706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.134864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.135033] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.135149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.136623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.161198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.163714] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.164014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.164328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.165001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.165292] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.165563] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.165977] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.167433] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.167714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.186086] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.186163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.186281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.186412] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.188388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.188532] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.188652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.188804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.194076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.195230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.195374] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.195513] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.195649] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.195820] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.196003] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [441.196051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.196207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [441.197708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.197883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.198047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.198171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.199643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.224201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.226747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.226953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.227172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.227821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.228149] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.228451] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.228911] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.230570] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.230869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.247068] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.247150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.247271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.247394] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.248233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.248364] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.248478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.248610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.254960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.256119] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.256261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.256390] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.256513] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.256657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.256844] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [441.256873] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [441.257027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.258592] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.258767] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.258934] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.259061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.260526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.285108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.287770] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.288129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.288503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.289177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.289523] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.289869] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.290319] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.292070] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.292390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.308552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.308630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.308762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.308899] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.309799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.309934] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.310056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.310192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.315410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.316556] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.316704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.316837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.316962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.317109] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.317281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [441.317323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.317478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [441.318707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.318866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.319040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.319166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.320640] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.345227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.347749] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.348000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.348262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.348871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.349178] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.349464] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.349895] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.351365] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.351626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.366694] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.366797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.366919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.367043] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.368915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.369059] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.369183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.369324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.375740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.376868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.377014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.377145] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.377268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.377415] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.377591] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [441.377622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [441.377769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.379327] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.379483] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.379655] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.379791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.381270] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.405890] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.408721] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.409079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.409453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.410139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.410482] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.410834] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.411296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.413006] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.413321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.430685] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.430779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.458856] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [441.458866] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [441.458870] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [441.458873] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [441.458877] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [441.458880] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [441.458884] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [441.458887] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [441.459418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [441.459534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [441.460081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [441.460189] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [441.460206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.460345] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.467421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.468558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.468705] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.468848] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.468973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.469120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.469306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [441.469329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [441.469468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.471032] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.471188] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.471349] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.471468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.473751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.498390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.500744] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.500921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.501106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.501563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.501866] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.502128] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.502492] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.503821] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.504073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.520141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.520242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.520358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.520488] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.521395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.521533] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.521647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.521820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.527015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.528164] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.528304] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.528440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.528578] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.528744] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.528924] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [441.528970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.529149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [441.530646] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.530816] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.530989] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.531114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.532588] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.557197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.559785] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.560147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.560521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.561375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.561754] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.562079] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.562530] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.564307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.564583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.579628] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.579718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.579846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.579965] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.580794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.580922] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.581040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.581181] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.588640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.589824] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.589970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.590101] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.590226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.590371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.590546] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [441.590569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [441.590727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.592291] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.592452] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.592625] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.592757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.594238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.618889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.621744] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.622108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.622483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.623165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.623512] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.623858] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.624264] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.625771] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.626070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.642277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.642355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.642479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.642602] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.643433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.643584] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.643715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.643860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.649059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.650201] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.650349] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.650489] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.650625] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.650798] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.650978] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [441.651031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.651187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [441.652689] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.652853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.653020] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.653136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.654599] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.679163] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.683828] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.684181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.684535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.685198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.685532] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.685857] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.686281] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.687945] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.688258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.706683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.706799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.706920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.707042] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.707931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.708063] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.708171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.708299] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.714647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.715811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.715954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.716096] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.716221] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.716367] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.716536] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [441.716567] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [441.716721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.718279] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.718438] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.718609] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.718743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.720226] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.744783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.747569] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.747961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.748341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.749191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.749533] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.749886] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.750338] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.752100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.752428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.767552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.767632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.795736] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [441.795746] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [441.795750] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [441.795753] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [441.795757] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [441.795761] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [441.795764] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [441.795768] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [441.796354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [441.796456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [441.797016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [441.797124] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [441.797142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.797282] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.805328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.806477] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.806619] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.806766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.806907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.807056] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.807248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [441.807271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [441.807409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.808705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.808872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.809038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.809154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.810631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.835261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.837770] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.838047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.838336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.839135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.839397] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.839641] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.840022] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.841350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.841612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.857717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.857824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.857943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.858065] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.858968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.859103] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.859214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.859348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.864556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.865714] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.865856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.865992] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.866132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.866296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.866475] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [441.866520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.866712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [441.868143] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.868309] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.868484] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.868610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.870111] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.894627] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.897397] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.897773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.898149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.898820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.899147] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.899452] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.899903] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.901395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.901697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.918942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.919052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.919188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.919319] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.920189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.920320] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.920430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.920560] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.925784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.926944] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.927085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.927224] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.927361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.927522] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.927713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [441.927768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.927927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [441.929377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.929537] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.929717] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.929846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.931321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [441.955888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [441.958620] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [441.958987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [441.959341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.960219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.960528] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [441.960835] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [441.961233] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.962664] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [441.962974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [441.978011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [441.978090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.978212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [441.978331] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [441.979180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [441.979310] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [441.979430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [441.979574] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [441.985911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [441.987057] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.987200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [441.987331] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.987455] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [441.987603] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [441.987788] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [441.987810] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [441.987980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [441.989379] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [441.989540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [441.989707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [441.989832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [441.991302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.015891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.018687] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.018855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.019029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.019484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.019858] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.020186] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.020633] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.022396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.022716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.038931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.039008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.039128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.039249] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.040097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.040230] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.040350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.040496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.046814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.047976] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.048119] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.048257] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.048392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.048549] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.048726] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [442.048757] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [442.048898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.050378] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.050538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.050720] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.050845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.052318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.076877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.079702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.080013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.080362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.081170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.081494] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.081820] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.082248] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.083996] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.084296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.100503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.100590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.128268] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [442.128278] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [442.128281] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [442.128284] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [442.128288] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [442.128291] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [442.128294] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [442.128297] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [442.128925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [442.129044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [442.129696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [442.129806] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [442.129822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.129961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.137157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.138295] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.138442] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.138583] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.138731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.138892] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.139068] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [442.139090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [442.139231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.140705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.140865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.141038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.141164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.142642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.167184] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.169762] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.170102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.170454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.171280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.171604] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.171954] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.172398] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.174216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.174496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.191772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.191855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.191977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.192098] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.194070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.194201] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.194320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.194464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.199754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.200902] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.201045] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.201185] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.201325] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.201485] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.201662] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [442.201720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.201876] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [442.203374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.203539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.203733] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.203866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.205342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.229185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.231754] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.232120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.232493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.233179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.233504] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.233832] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.234290] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.236082] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.236415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.252579] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.252656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.252801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.252939] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.253832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.253964] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.254088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.254234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.261691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.262854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.262996] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.263140] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.263279] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.263438] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.263640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.263823] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [442.263846] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [442.265343] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.265506] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.265689] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.265816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.267298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.291975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.294731] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.294996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.295301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.296038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.296380] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.296745] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.297276] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.299015] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.299347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.316639] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.316745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.316873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.316999] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.317904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.318039] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.318160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.318304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.323519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.324645] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.324798] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.324941] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.325078] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.325238] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.325416] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [442.325462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.325622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [442.327129] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.327277] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.327432] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.327542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.329019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.353607] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.358825] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.359226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.359626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.360368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.360763] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.361107] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.361582] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.363329] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.363696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.382226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.382334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.382456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.382579] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.383381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.383511] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.383634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.383785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.388988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.390136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.390278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.390415] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.390557] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.390726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.390928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.391078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [442.391130] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [442.392563] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.392741] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.392918] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.393045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.395748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.420389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.424816] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.425192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.425568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.426384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.426791] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.427142] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.427595] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.429328] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.429664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.445939] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.446021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.475110] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [442.475119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [442.475123] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [442.475126] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [442.475129] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [442.475132] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [442.475135] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [442.475139] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [442.475668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [442.475809] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [442.476430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [442.476540] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [442.476557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.476709] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.485912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.487065] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.487210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.487341] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.487465] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.487613] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.487791] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [442.487814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [442.487955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.489387] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.489549] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.489733] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.489859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.491341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.515936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.518729] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.519098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.519474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.520253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.520599] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.520951] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.521407] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.523066] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.523363] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.539589] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.539668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.539801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.539943] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.540751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.540884] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.541005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.541154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.546348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.547510] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.547654] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.547804] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.547940] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.548099] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.548270] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [442.548312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.548471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [442.549705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.549864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.550019] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.550136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.551604] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.576090] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.580826] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.581206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.581582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.582275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.582621] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.582975] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.583430] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.585344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.585667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.604195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.604304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.604424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.604546] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.605377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.605525] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.605646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.605801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.611026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.612178] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.612343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.612485] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.612624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.612801] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.612996] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [442.613043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.613187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [442.614692] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.614855] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.615027] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.615154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.616636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.641289] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.643746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.643958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.644175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.644722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.645171] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.645524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.646037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.647964] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.648295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.664543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.664626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.664759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.664913] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.665705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.665864] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.665990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.666135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.672472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.673624] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.673795] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.673946] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.674087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.674246] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.674422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [442.674446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [442.674583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.676155] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.676323] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.676495] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.676621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.678102] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.702717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.705477] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.705854] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.706226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.706933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.707314] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.707667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.708197] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.710034] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.710358] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.727651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.727767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.727912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.728036] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.728901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.729048] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.729173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.729321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.735658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.736796] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.736964] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.737107] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.737246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.737431] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.737619] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [442.737650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [442.737802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.739376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.739539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.739738] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.739893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.741346] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.766019] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.768763] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.769152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.769549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.770346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.770772] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.771129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.771613] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.773429] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.773810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.792251] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.792336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.820177] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [442.820187] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [442.820190] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [442.820193] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [442.820196] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [442.820200] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [442.820202] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [442.820206] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [442.820746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [442.820903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [442.821518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [442.821628] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [442.821645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.821797] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.828958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.830109] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.830275] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.830416] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.830553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.830732] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.830960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.831112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [442.831135] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [442.832632] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.832804] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.832978] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.833103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.834583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.859212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.861757] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.862032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.862342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.863082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.863396] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.863713] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.864139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.865636] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.865921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.883249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.883329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.883453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.883576] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.884421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.884576] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.884711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.884884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.890090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.891230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.891389] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.891527] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.891664] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.891836] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.892050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [442.892092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.892247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [442.893705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.893867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.894039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.894166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.895694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.920226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.922763] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.923125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.923497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.924495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.924878] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.925261] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.925736] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.927386] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.927657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [442.942742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [442.942832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [442.942966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [442.943100] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [442.943919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [442.944066] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [442.944191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [442.944339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [442.950659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [442.951830] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.951993] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [442.952123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.952249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [442.952397] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [442.952577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [442.952600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [442.952759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [442.954353] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [442.954519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [442.954701] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [442.954850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [442.956318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [442.980939] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [442.983754] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [442.984183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [442.984634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [442.985463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [442.985827] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [442.986149] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [442.986557] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [442.987921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [442.988175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.004341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.004423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.004542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.004660] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.005508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.005659] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.005796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.005968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.011179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.012305] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.012464] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.012591] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.012732] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.012910] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.013113] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [443.013167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.013320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [443.014705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.014874] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.015048] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.015175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.016653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.041223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.043744] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.043929] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.044122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.044655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.045024] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.045390] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.045854] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.047342] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.047616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.063838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.063917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.064043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.064172] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.065015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.065158] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.065267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.065397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.071738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.072881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.073041] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.073167] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.073291] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.073434] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.073641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.073806] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [443.073840] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [443.075386] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.075549] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.075719] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.075861] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.077328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.101926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.104670] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.105069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.105441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.106331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.106659] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.106977] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.107447] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.108936] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.109201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.126479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.126562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.154304] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [443.154314] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [443.154318] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [443.154321] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [443.154324] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [443.154328] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [443.154330] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [443.154334] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [443.154966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [443.155108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [443.155690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [443.155824] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [443.155842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.155986] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.164244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.165392] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.165556] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.165708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.165868] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.166021] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.166201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [443.166224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [443.166366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.167705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.167871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.168044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.168169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.169651] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.194110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.195704] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.195857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.196017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.196426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.196649] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.196923] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.197341] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.198625] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.198877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.214944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.215039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.215176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.215310] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.216208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.216350] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.216472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.216614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.221815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.222977] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.223143] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.223283] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.223421] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.223579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.223778] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [443.223834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.223993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [443.225376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.225541] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.225723] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.225869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.227343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.251949] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.254674] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.255070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.255448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.256354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.256669] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.256986] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.257411] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.258888] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.259178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.274182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.274266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.274387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.274507] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.275348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.275505] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.275632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.275801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.282185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.283313] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.283479] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.283606] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.283746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.283922] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.284109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [443.284133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [443.284272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.285705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.285867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.286035] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.286159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.287627] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.312203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.314745] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.314946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.315160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.315778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.316171] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.316474] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.316990] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.318630] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.318937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.335145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.335225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.335344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.335465] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.336326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.336464] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.336576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.336736] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.341986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.343110] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.343276] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.343419] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.343555] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.343733] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.343941] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [443.343984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.344137] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [443.345635] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.345827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.345997] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.346118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.347586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.372147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.374743] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.374935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.375132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.375601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.375960] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.376331] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.376750] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.378352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.378626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.395978] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.396063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.396186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.396307] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.397160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.397303] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.397412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.397547] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.403897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.405032] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.405196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.405338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.405474] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.405632] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.405828] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [443.405874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [443.406027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.407583] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.407756] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.407916] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.408031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.410719] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.435332] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.439814] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.440146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.440482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.441191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.441533] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.441911] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.442453] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.444304] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.444572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.461901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.462008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.490161] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [443.490171] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [443.490174] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [443.490177] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [443.490180] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [443.490183] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [443.490186] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [443.490189] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [443.490766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [443.490921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [443.491552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [443.491661] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [443.491689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.491850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.498630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.499762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.499927] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.500059] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.500185] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.500334] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.500537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [443.500559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [443.500692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.502282] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.502447] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.502617] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.502753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.504268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.528845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.531622] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.531951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.532270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.533148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.533443] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.533717] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.534126] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.535463] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.535732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.550724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.550829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.550948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.551069] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.551904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.552044] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.552159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.552291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.558615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.559769] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.559927] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.560056] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.560183] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.560329] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.560511] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [443.560534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [443.560688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.562279] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.562445] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.562621] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.562748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.564246] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.588861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.591740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.592094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.592450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.593251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.593556] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.593865] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.594283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.595745] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.596029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.613331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.613414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.613537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.613659] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.614499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.614649] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.614786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.614957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.620152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.621298] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.621458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.621586] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.621737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.621919] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.622126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.622276] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [443.622322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [443.623706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.623871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.624038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.624151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.625618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.650219] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.652781] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.653146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.653522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.654444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.654800] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.655157] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.655604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.657220] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.657485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.673669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.673789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.673926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.674047] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.675896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.676042] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.676164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.676303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.681572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.682710] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.682875] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.683002] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.683131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.683278] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.683470] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [443.683514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.683668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [443.685185] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.685344] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.685514] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.685629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.687132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.711751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.714496] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.714829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.715157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.715778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.716137] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.716425] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.716886] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.718313] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.718598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.734826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.734908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.735030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.735151] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.736007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.736142] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.736252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.736380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.742718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.743868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.744033] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.744162] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.744286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.744433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.744625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [443.744657] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [443.744829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.746377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.746540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.746711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.746855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.748322] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.772963] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.775665] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.775898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.776124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.776943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.777304] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.777610] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.778094] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.779591] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.779895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.796091] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.796176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.824128] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [443.824138] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [443.824141] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [443.824144] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [443.824147] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [443.824150] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [443.824153] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [443.824157] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [443.824693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [443.824827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [443.825454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [443.825559] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [443.825576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.825723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.834060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.835184] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.835352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.835482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.835607] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.835766] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.835976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [443.836000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [443.836131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.837706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.837874] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.838046] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.838162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.839631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.864210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.866760] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.867067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.867382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.868047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.868343] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.868600] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.869057] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.870423] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.870693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.889082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.889161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.889278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.889398] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.890341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.890485] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.890597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.890755] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.896003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.897123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.897287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.897413] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.897537] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.897689] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.897875] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [443.897930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.898099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [443.899599] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.899791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.899958] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.900078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.901542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.926136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.928751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.929095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.929449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.930247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.930594] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.930943] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.931448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.933388] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.933718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [443.949897] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [443.950008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [443.950132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [443.950255] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [443.951063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [443.951209] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [443.951323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [443.951456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [443.957818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [443.958938] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.959102] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [443.959232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.959361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [443.959506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [443.959697] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [443.959723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [443.959891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [443.961420] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [443.961583] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [443.961770] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [443.961913] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [443.963343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [443.987846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [443.990709] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [443.991071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [443.991449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [443.992279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [443.992610] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [443.992947] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [443.993434] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [443.994996] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [443.995296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.012504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.012585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.012731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.012885] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.013756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.013914] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.014039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.014171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.019354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.020505] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.020669] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.020816] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.020965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.021115] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.021319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.021474] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [444.021519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [444.022706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.022874] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.023050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.023177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.024654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.049249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.051765] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.052082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.052410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.053353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.053675] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.053994] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.054450] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.056172] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.056461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.071537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.071616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.071759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.071911] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.072705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.072860] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.072980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.073122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.079458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.080609] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.080785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.080928] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.081067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.081227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.081407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [444.081439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [444.081575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.083146] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.083309] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.083483] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.083608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.085098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.109730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.112636] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.113031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.113408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.114224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.114576] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.114933] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.115455] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.116885] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.117153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.134463] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.134573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.162288] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [444.162299] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [444.162302] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [444.162305] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [444.162309] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [444.162313] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [444.162316] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [444.162320] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [444.162955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [444.163073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [444.163706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [444.163816] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [444.163832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.163970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.172169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.173316] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.173482] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.173613] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.173763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.173965] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.174170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.174322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [444.174345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [444.175711] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.175878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.176047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.176161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.177632] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.202259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.204719] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.205008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.205304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.205915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.206229] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.206487] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.206903] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.208206] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.208447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.224527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.224632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.224774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.224929] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.225780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.225940] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.226064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.226210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.232548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.233688] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.233832] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.233971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.234098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.234242] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.234426] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [444.234449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [444.234586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.236154] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.236320] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.236481] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.236595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.238079] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.262669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.267819] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.268174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.268522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.269190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.269514] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.269854] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.270325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.272073] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.272408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.288572] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.288654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.288828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.288965] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.289822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.289955] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.290076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.290217] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.295414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.296562] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.296711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.296843] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.296969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.297114] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.297291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [444.297335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.297491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [444.298708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.298872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.299043] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.299165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.300633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.325212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.329823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.330176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.330528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.331377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.331719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.332026] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.332467] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.334174] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.334490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.349606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.349692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.349829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.349966] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.350772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.350904] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.351015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.351164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.357488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.358659] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.358813] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.358951] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.359087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.359246] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.359427] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [444.359450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [444.359587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.361160] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.361317] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.361475] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.361586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.363063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.387541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.391801] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.392177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.392553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.393334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.393701] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.394031] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.394469] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.396231] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.396580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.412761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.412852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.412974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.413096] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.414014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.414153] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.414278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.414426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.420758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.421902] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.422045] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.422177] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.422302] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.422449] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.422644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.422811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [444.422842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [444.424342] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.424504] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.424676] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.424812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.426295] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.450840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.453650] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.454042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.454415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.455085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.455413] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.455739] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.456135] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.457633] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.457927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.476371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.476471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.504166] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [444.504177] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [444.504180] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [444.504183] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [444.504188] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [444.504191] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [444.504194] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [444.504198] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [444.504742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [444.504876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [444.505521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [444.505632] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [444.505657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.505823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.515229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.516411] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.516557] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.516706] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.516843] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.517001] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.517181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [444.517204] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [444.517342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.518706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.518868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.519028] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.519140] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.520608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.545181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.547702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.548016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.548351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.549045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.549357] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.549656] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.550103] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.551840] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.552139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.568277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.568354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.568476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.568599] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.569520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.569651] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.569783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.569930] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.576262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.577418] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.577559] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.577704] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.577842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.577987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.578182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.578333] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [444.578356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [444.579705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.579870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.580041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.580167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.581650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.606242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.608719] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.609062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.609413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.610072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.610405] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.610736] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.611160] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.612713] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.613009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.630279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.630355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.630474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.630597] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.631523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.631658] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.631793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.631936] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.637129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.638282] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.638426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.638569] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.638714] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.638869] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.639039] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [444.639082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.639236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [444.640705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.640873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.641048] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.641175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.642649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.667194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.671838] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.672173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.672504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.673155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.673462] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.673765] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.674164] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.675652] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.675977] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.692190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.692273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.692395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.692512] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.693357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.693488] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.693607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.693761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.700091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.701235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.701384] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.701515] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.701638] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.701809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.701992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [444.702015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [444.702154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.703710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.703895] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.704065] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.704181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.705647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.730213] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.732712] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.733017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.733313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.734028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.734359] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.734666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.735142] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.736604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.736867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.754093] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.754171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.754293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.754413] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.755343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.755475] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.755587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.755750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.760945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.762093] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.762236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.762368] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.762492] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.762636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.762839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [444.762893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.763098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [444.764597] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.764766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.764932] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.765056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.766534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.791129] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.795835] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.796188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.796539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.797209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.797533] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.797854] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.798248] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.799911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.800222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.816455] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.816536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.845405] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [444.845415] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [444.845418] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [444.845421] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [444.845424] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [444.845427] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [444.845430] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [444.845434] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [444.845963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [444.846078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [444.846881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [444.847010] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [444.847027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.847171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.856524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.857700] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.857845] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.857973] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.858098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.858240] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.858419] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [444.858442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [444.858593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.860170] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.860332] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.860489] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.860602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.862107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.886733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.889651] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.890025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.890372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.891018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.891341] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.891638] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.892047] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.893475] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.893764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.909875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.909960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.910089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.910221] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.911128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.911262] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.911384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.911525] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.916723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.917871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.918013] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.918144] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.918270] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.918414] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.918584] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [444.918632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.918804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [444.920304] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.920468] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.920641] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.920776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.922324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [444.946960] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [444.949676] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [444.949957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [444.950302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [444.951179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [444.951502] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [444.951840] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [444.952267] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [444.953738] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.954018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.969070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [444.969149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [444.969269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [444.969390] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [444.970236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [444.970366] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [444.970476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.970608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [444.976963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [444.978114] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.978256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [444.978387] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.978511] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [444.978657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [444.978832] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [444.978855] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [444.978998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [444.980565] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [444.980745] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [444.980909] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [444.981033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [444.983673] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.008298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.012821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.013198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.013577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.014295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.014675] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.015059] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.015506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.017283] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.017560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.033690] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.033811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.033930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.034050] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.034934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.035071] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.035183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.035313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.041642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.042811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.042952] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.043085] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.043210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.043357] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.043526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [445.043557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [445.043720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.045280] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.045444] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.045615] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.045746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.048517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.073112] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.075711] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.076093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.076485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.077176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.077524] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.077886] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.078352] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.080177] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.080494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.097879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.097961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.098081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.098200] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.099045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.099177] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.099289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.099424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.104639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.105794] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.105936] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.106069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.106192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.106336] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.106509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [445.106552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.106759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [445.108193] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.108352] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.108521] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.108644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.110212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.134781] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.137548] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.137981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.138357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.139216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.139570] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.139908] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.140344] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.141853] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.142143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.157196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.157284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.185355] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [445.185365] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [445.185368] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [445.185371] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [445.185374] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [445.185378] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [445.185381] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [445.185384] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [445.186041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [445.186162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [445.186886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [445.187005] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [445.187022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.187186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.193958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.195120] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.195264] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.195394] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.195522] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.195670] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.195857] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [445.195880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [445.196014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.197572] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.197735] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.197892] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.198008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.200671] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.225370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.227754] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.227953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.228165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.228842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.229131] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.229401] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.229812] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.231297] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.231545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.246567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.246648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.246800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.246937] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.247728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.247857] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.247971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.248118] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.254462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.255623] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.255777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.255917] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.256055] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.256211] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.256391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [445.256413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [445.256560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.258132] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.258298] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.258472] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.258587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.260074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.284647] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.289765] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.290103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.290450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.291103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.291433] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.291778] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.292246] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.294057] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.294383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.310483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.310560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.310693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.310831] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.311729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.311860] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.311983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.312125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.318464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.319611] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.319758] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.319893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.320018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.320161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.320322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [445.320344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [445.320511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.322078] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.322232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.322395] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.322509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.324021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.348597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.352722] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.353062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.353417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.354158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.354486] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.354808] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.355239] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.356820] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.357121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.374476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.374584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.374729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.374864] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.375650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.375794] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.375916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.376066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.381288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.382412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.382561] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.382708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.382846] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.383004] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.383205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.383355] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [445.383399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [445.384706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.384875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.385033] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.385144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.386610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.411216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.413702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.413876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.414060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.414525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.414883] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.415196] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.415632] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.417301] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.417584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.433714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.433796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.433917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.434043] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.434965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.435096] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.435205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.435335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.441690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.442850] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.442995] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.443137] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.443278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.443441] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.443626] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [445.443658] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [445.443817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.445375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.445536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.445711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.445839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.447307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.471872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.474609] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.474799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.474995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.475573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.475927] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.476237] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.476668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.478357] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.478670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.495978] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.496062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.524012] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [445.524022] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [445.524026] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [445.524029] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [445.524033] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [445.524036] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [445.524040] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [445.524043] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [445.524576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [445.524702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [445.525350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [445.525459] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [445.525477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.525616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.532664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.533802] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.533950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.534079] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.534205] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.534350] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.534548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.534701] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [445.534724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [445.536217] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.536378] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.536553] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.536685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.538240] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.562797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.565521] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.565905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.566248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.566856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.567142] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.567401] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.567793] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.569125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.569378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.585543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.585621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.585760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.585894] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.586710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.586859] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.586974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.587116] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.592303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.593449] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.593592] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.593739] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.593874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.594022] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.594191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [445.594244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.594411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [445.595707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.595869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.596039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.596162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.597660] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.622236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.624786] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.625156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.625534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.626403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.626773] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.627097] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.627553] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.629299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.629555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.644603] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.644689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.644830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.644964] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.645761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.645891] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.646012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.646154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.652505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.653649] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.653801] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.653936] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.654062] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.654206] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.654381] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [445.654404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [445.654542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.656112] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.656272] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.656440] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.656563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.658046] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.682598] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.684700] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.684846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.685008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.685421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.685569] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.685827] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.686255] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.688056] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.688374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.705655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.705765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.705892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.706015] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.706908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.707046] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.707158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.707287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.712500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.713646] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.713800] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.713937] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.714061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.714208] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.714377] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [445.714421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.714575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [445.716081] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.716245] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.716416] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.716541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.718023] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.742599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.745385] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.745756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.746130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.746887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.747230] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.747558] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.748034] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.749727] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.750052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.765142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.765237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.765357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.765475] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.766307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.766441] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.766569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.766723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.773027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.774198] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.774339] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.774468] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.774591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.774752] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.774931] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [445.774963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [445.775108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.776665] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.776834] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.777000] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.777115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.778580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.803157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.805755] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.806097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.806448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.807106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.807434] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.807761] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.808207] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.809660] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.809956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.827201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.827293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.855260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [445.855270] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [445.855274] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [445.855276] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [445.855280] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [445.855283] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [445.855286] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [445.855289] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [445.856025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [445.856144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [445.856866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [445.856972] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [445.856989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.857130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.863891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.865028] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.865174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.865305] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.865433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.865579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.865773] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [445.865796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [445.865938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.867375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.867535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.867712] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.867837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.869309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.893839] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.896604] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.896934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.897245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.897925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.898199] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.898465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.898873] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.900207] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.900458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.917757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.917852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.917972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.918091] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.918918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.919053] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.919176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.919321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.924514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.925660] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.925814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.925948] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.926073] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.926221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.926400] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [445.926445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.926594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [445.928091] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.928244] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.928413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.928527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.930742] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [445.955278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [445.959821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [445.960155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [445.960487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [445.961128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [445.961433] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [445.961734] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [445.962166] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [445.963833] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [445.964161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [445.980316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [445.980397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [445.980521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [445.980643] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [445.982614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [445.982784] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [445.982900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [445.983032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [445.988323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [445.989470] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.989616] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [445.989764] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.989903] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [445.990061] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [445.990236] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [445.990284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [445.990437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [445.991706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [445.991867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [445.992040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [445.992164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [445.993644] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [446.018239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [446.022821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [446.023175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [446.023527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [446.024190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [446.024515] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [446.024856] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [446.025315] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [446.027025] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [446.027347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [446.043574] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [446.043671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [446.043841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [446.043978] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [446.045840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [446.045978] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [446.046103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [446.046247] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [446.052637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [446.053798] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.053941] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [446.054080] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.054219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [446.054381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [446.054563] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [446.054587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [446.054739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [446.056302] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [446.056463] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.056634] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [446.056766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [446.058242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [446.082854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [446.085727] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [446.086071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [446.086428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [446.087088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [446.087419] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [446.087742] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [446.088165] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [446.089703] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [446.090042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [446.108539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [446.108623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [446.108774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [446.108914] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [446.109703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [446.109841] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [446.109964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [446.110107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [446.116413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [446.117585] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.117731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [446.117872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.117999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [446.118145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [446.118322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [446.118354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [446.118492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [446.120069] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [446.120230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.120399] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [446.120526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [446.122741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [446.147356] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [446.149718] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [446.149947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [446.150188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [446.150748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [446.151098] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [446.151427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [446.151940] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [446.153646] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [446.153950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [446.172329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [446.172413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [446.200238] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [446.200249] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [446.200253] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [446.200256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [446.200260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [446.200263] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [446.200266] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [446.200270] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [446.200903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [446.201022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [446.201696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [446.201857] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [446.201875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [446.202016] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [446.210167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [446.211306] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.211453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [446.211594] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.211746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [446.211912] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [446.212092] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3 <7> [446.212116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [446.212251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [446.213706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [446.213863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.214031] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [446.214147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [446.215615] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [446.240233] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [446.242766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [446.243057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [446.243357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [446.244015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [446.244294] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [446.244551] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [446.244943] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [446.246487] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [446.246771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [446.264008] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [446.264105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [446.264228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [446.264350] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [446.265253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [446.265391] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [446.265503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [446.265633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [446.271988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [446.273140] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.273281] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [446.273414] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.273541] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [446.273691] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [446.273870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [446.273893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [446.274030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [446.275589] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [446.275756] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.275920] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [446.276034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [446.278669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [446.303328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [446.307828] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [446.308203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [446.308576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [446.309269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [446.309620] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [446.309988] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [446.310494] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [446.312360] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [446.312643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [446.329907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [446.329986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [446.330108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [446.330229] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [446.331157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [446.331288] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [446.331408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [446.331552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <6> [446.335879] [IGT] i915_pm_rpm: exiting, ret=98 <6> [446.337112] Console: switching to colour frame buffer device 240x67 <7> [446.337875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [446.339041] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.339196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [446.339337] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.339475] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [446.339635] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [446.339843] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [446.339866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [446.340011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [446.341579] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0) <7> [446.341762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.341936] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [446.342066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [446.344701] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [446.369223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [446.373717] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [446.374042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [446.374371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [446.375023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [446.375327] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [446.375610] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [446.376046] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [446.377566] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [446.377886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [446.395251] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [446.395339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [446.395460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [446.395583] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [446.396403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [446.396539] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [446.396667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [446.396820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [446.397095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [446.397271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [446.397446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [446.397629] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [446.398442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [446.398631] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [446.398828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [446.399025] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [446.399121] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [446.399333] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [446.399525] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [446.399733] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A] <7> [446.399901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [446.400088] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [446.400272] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [446.400461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [446.400645] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [446.400849] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [446.401029] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [446.401211] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [446.401392] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [446.401570] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [446.401767] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [446.401949] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [446.402127] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [446.402302] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [446.402483] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [446.402667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [446.402868] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [446.403046] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [446.403226] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [446.403404] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [446.403584] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [446.403784] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [446.403967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [446.404149] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [446.404329] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [446.404505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [446.404694] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [446.404883] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [446.405068] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [446.405249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [446.405427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [446.405610] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [446.405808] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [446.405990] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [446.406170] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes) <7> [446.406355] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes) <7> [446.406535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [446.406720] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [446.406724] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [446.406728] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [446.406731] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [446.406735] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [446.406739] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [446.406742] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [446.406746] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [446.406750] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [446.406928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [446.407104] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [446.407283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500) <7> [446.407468] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039) <7> [446.407653] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [446.407850] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [446.408029] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [446.408203] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [446.408208] i915 0000:00:02.0: colorspace: RGB <7> [446.408212] i915 0000:00:02.0: scan mode: Underscan <7> [446.408216] i915 0000:00:02.0: colorimetry: No Data <7> [446.408220] i915 0000:00:02.0: picture aspect: No Data <7> [446.408224] i915 0000:00:02.0: active aspect: Same as Picture <7> [446.408228] i915 0000:00:02.0: itc: No Data <7> [446.408232] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [446.408236] i915 0000:00:02.0: quantization range: Full <7> [446.408240] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [446.408244] i915 0000:00:02.0: video code: 0 <7> [446.408248] i915 0000:00:02.0: ycc quantization range: Full <7> [446.408251] i915 0000:00:02.0: hdmi content type: Graphics <7> [446.408255] i915 0000:00:02.0: pixel repeat: 0 <7> [446.408259] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [446.408263] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [446.408444] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [446.408627] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [446.408824] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [446.408829] i915 0000:00:02.0: vendor: Intel <7> [446.408833] i915 0000:00:02.0: product: Integrated gfx <7> [446.408837] i915 0000:00:02.0: source device information: PC General (0x9) <7> [446.408841] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [446.409025] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [446.409201] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [446.409377] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [446.409382] i915 0000:00:02.0: empty frame <7> [446.409386] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [446.409609] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [446.409796] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [446.409991] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [446.410165] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [446.410342] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [446.410515] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [446.410690] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 <7> [446.410862] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 <7> [446.411032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1 <7> [446.411218] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [446.411397] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0 <7> [446.411607] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz) <7> [446.411809] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz) <7> [446.412000] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [446.412181] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [446.412363] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [446.412548] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0 <7> [446.412740] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0 <7> [446.412920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset] <7> [446.413098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [446.413280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [446.413459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [446.413639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [446.413836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [446.414014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [446.414192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [446.414365] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39 <7> [446.414543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [446.414725] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [446.414730] i915 0000:00:02.0: colorspace: RGB <7> [446.414733] i915 0000:00:02.0: scan mode: Underscan <7> [446.414737] i915 0000:00:02.0: colorimetry: No Data <7> [446.414741] i915 0000:00:02.0: picture aspect: No Data <7> [446.414745] i915 0000:00:02.0: active aspect: Same as Picture <7> [446.414749] i915 0000:00:02.0: itc: No Data <7> [446.414752] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [446.414756] i915 0000:00:02.0: quantization range: Full <7> [446.414760] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [446.414764] i915 0000:00:02.0: video code: 0 <7> [446.414768] i915 0000:00:02.0: ycc quantization range: Full <7> [446.414771] i915 0000:00:02.0: hdmi content type: Graphics <7> [446.414775] i915 0000:00:02.0: pixel repeat: 0 <7> [446.414779] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [446.414783] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [446.414788] i915 0000:00:02.0: vendor: Intel <7> [446.414791] i915 0000:00:02.0: product: Integrated gfx <7> [446.414795] i915 0000:00:02.0: source device information: PC General (0x9) <7> [446.414799] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [446.414803] i915 0000:00:02.0: empty frame <7> [446.414807] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [446.414811] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [446.414815] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [446.414819] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [446.414823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [446.415007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [446.415193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [446.415381] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [446.415561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [446.415757] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [446.415939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500 <7> [446.416123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [446.416301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [446.416478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [446.416658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [446.416863] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [446.417043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [446.417219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [446.417399] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [446.417582] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [446.417809] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [446.417990] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [446.418167] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [446.418343] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [446.418524] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [446.418711] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [446.418887] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [446.419063] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [446.419244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:355] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [446.419426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [446.419601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [446.419797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [446.419981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [446.420161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [446.420338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [446.420519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [446.420703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [446.420861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [446.421258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [446.421444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [446.422183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [446.423375] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.423584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [446.423801] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [446.423994] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [446.424224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [446.424396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [446.424589] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [446.424889] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [446.425063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [446.425243] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [446.425414] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [446.425584] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [446.425773] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [446.425943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [446.426115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [446.426285] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [446.426452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [446.426623] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [446.426803] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [446.426975] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [446.427146] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [446.427314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [446.427485] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [446.427651] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [446.427840] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [446.428001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [446.428174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [446.428343] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [446.428517] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [446.428747] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [446.428934] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [446.429119] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [446.429308] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [446.429495] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [446.429689] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [446.429930] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [446.430082] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [446.430221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [446.430389] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A] <7> [446.430514] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [446.430723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [446.430949] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [446.431539] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [446.432258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [446.432379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [446.433152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [446.433262] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [446.433274] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [446.433500] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD <7> [446.441852] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [446.442015] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [446.442147] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [446.442286] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [446.442290] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [446.442292] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [446.442294] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [446.443708] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [446.443841] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [446.450194] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [446.450524] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [446.450710] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [446.451054] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [446.451503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [422.718400] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1]

<7> [422.718425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [422.745724] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [422.745734] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [422.745737] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [422.745739] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [422.745743] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [422.745747] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [422.745750] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [422.745764] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [422.746344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [422.746473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [422.747055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [422.747164] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [422.747790] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] probed modes :

<7> [422.747805] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [422.747810] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.747813] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.747815] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.747818] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.747821] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.747823] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.747826] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.747829] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.747834] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [422.747838] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [422.747840] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [422.747843] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa

<7> [422.747845] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6

<7> [422.747848] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6

<7> [422.747850] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa

<7> [422.747852] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6

<7> [422.747855] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [422.747857] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [422.747860] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6

<7> [422.747862] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6

<7> [422.747865] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa

<7> [422.747867] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6

<7> [422.747870] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6

<7> [422.747872] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6

<7> [422.747874] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6

<7> [422.747877] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5

<7> [422.747879] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [422.747882] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6

<7> [422.747884] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6

<7> [422.747886] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [422.747889] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [422.747891] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6

<7> [422.747894] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [422.747896] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [422.747898] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [422.747901] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [422.747903] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [422.747906] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [422.747908] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6

<7> [422.747911] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [422.747913] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6

<7> [422.747915] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6

<7> [422.747918] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6

<7> [422.747920] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [422.747923] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [422.747925] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [422.747928] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6

<7> [422.747930] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6

<7> [422.747933] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [422.747935] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [422.747938] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5

<7> [422.747940] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6

<7> [422.747942] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [422.747945] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [422.747947] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6

<7> [422.747950] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6

<7> [422.747952] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [422.747955] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [422.747957] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa

<7> [422.747959] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [422.747962] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6

<7> [422.747964] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [422.747967] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [422.747969] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5

<7> [422.747972] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [422.747974] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [422.747976] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [422.747979] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [422.747981] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa

<7> [422.747984] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [422.747986] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [422.747988] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [422.748127] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1]

<7> [422.748139] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [422.748289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.748423] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.748591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.748733] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.748863] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected

<7> [422.748957] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2]

<7> [422.748969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [422.749087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.749222] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.749447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.749579] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.749711] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected

<7> [422.749800] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3]

<7> [422.749812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [422.749928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.750063] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.750368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.750503] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.750625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected

<7> [422.750723] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4]

<7> [422.750735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [422.750851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.750991] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.751294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.751423] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.751546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected

<7> [422.761943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1]

<7> [422.761959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [422.762100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.762230] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.762526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.762646] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.762780] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected

<7> [422.763409] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2]

<7> [422.763422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [422.763545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.763689] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.763912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.764032] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.764153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected

<7> [422.764676] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3]

<7> [422.764698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [422.764815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.764950] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.765162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.765304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.765427] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected

<7> [422.765964] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4]

<7> [422.765976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [422.766094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.766229] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.766447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.766576] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.766706] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected

<7> [422.767425] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1]

<7> [422.767441] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [422.794398] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [422.794407] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [422.794410] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [422.794413] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [422.794416] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [422.794419] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [422.794422] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [422.794426] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [422.795070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [422.795185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [422.795854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [422.795959] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [422.796551] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] probed modes :

<7> [422.796564] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [422.796569] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.796572] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.796575] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.796578] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.796581] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.796584] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.796587] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.796589] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [422.796592] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [422.796595] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [422.796598] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [422.796601] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa

<7> [422.796604] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6

<7> [422.796607] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6

<7> [422.796609] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa

<7> [422.796612] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6

<7> [422.796615] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [422.796618] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [422.796621] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6

<7> [422.796624] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6

<7> [422.796627] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa

<7> [422.796629] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6

<7> [422.796632] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6

<7> [422.796635] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6

<7> [422.796638] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6

<7> [422.796640] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5

<7> [422.796643] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [422.796646] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6

<7> [422.796648] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6

<7> [422.796651] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [422.796654] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [422.796656] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6

<7> [422.796659] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [422.796662] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [422.796664] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [422.796667] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [422.796670] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [422.796673] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [422.796675] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6

<7> [422.796686] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [422.796689] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6

<7> [422.796692] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6

<7> [422.796694] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6

<7> [422.796697] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [422.796700] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [422.796703] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [422.796705] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6

<7> [422.796708] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6

<7> [422.796711] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [422.796714] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [422.796716] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5

<7> [422.796719] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6

<7> [422.796722] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [422.796724] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [422.796727] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6

<7> [422.796730] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6

<7> [422.796733] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [422.796736] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [422.796738] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa

<7> [422.796741] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [422.796744] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6

<7> [422.796747] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [422.796750] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [422.796752] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5

<7> [422.796755] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [422.796758] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [422.796761] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [422.796763] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [422.796766] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa

<7> [422.796769] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [422.796772] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [422.796775] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [422.796824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1]

<7> [422.796837] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [422.796957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.797094] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.797316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.797447] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.797574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected

<7> [422.797600] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2]

<7> [422.797612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [422.797737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.797873] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.798097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.798231] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.798353] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected

<7> [422.798378] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3]

<7> [422.798390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [422.798508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.798642] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.798872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.799003] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.799125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected

<7> [422.799149] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4]

<7> [422.799160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [422.799272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [422.799411] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [422.799635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [422.799779] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [422.799901] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected

<7> [423.824107] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [423.824533] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [423.824957] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [423.825334] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [423.825727] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [423.826103] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [423.826481] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [423.826870] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [423.827234] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [423.827591] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [423.827965] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [423.828336] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [423.828721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [423.829089] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [423.829283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [423.829406] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [423.829528] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [423.829654] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [423.829791] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [423.829918] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [423.830034] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [423.830146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [423.830256] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [423.830380] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [423.830506] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [423.830632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [423.830762] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [423.830886] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [423.831006] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [423.831126] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [423.831249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [423.831368] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [423.831493] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [423.831619] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [423.831750] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [423.831874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no)

<7> [423.831997] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [423.832117] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [423.832119] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [423.832120] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [423.832122] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [423.832123] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [423.832125] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [423.832126] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [423.832128] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [423.832130] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [423.832250] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [423.832369] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [423.832488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [423.832613] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000)

<7> [423.832758] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [423.832884] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [423.833006] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [423.833023] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [423.833031] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [423.833033] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [423.833154] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [423.833276] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [423.833397] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [423.833402] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [423.833404] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [423.833525] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [423.833644] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [423.833773] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [423.833777] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [423.833898] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [423.834024] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0

<7> [423.834181] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [423.834299] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [423.834445] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [423.834556] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [423.834674] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [423.834819] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [423.834934] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [423.835047] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [423.835160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0

<7> [423.835289] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [423.835433] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [423.835559] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [423.835690] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [423.835817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset]

<7> [423.835947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [423.836074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [423.836199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [423.836322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [423.836443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [423.836564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [423.836692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [423.836815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [423.842349] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A]

<7> [423.857803] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [423.857968] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [423.858520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [423.858633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [423.859221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [423.859329] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [423.859341] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [423.859490] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [423.867766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [423.867933] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A]

<7> [423.868077] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [423.868215] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [423.868343] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [423.868553] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [423.868696] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [423.868815] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [423.868932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [423.869048] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [423.869166] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [423.869283] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [423.869397] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [423.869510] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [423.869621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [423.869742] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [423.869855] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [423.869965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [423.870074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [423.870183] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [423.870293] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [423.870410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [423.870523] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [423.870636] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [423.870755] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [423.870869] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [423.870981] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [423.871103] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [423.871234] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [423.871363] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [423.871489] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [423.871613] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [423.871744] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [423.871867] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [423.871990] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [423.872109] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [423.872244] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [423.872404] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [423.872565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [423.872715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [423.872848] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)

<7> [423.872983] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [423.873194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [423.873323] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [423.873443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [423.874874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [423.875751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [423.876923] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [423.877068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [423.877208] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [423.877364] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [423.877536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [423.877664] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [423.877807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [423.879136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [423.880127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [423.881290] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [423.881432] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [423.881570] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [423.881711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [423.881850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [423.881981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [423.882104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [423.883401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [423.884413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [423.885579] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [423.885727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [423.885868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [423.886005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [423.886143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [423.886275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [423.886398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [423.888865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [423.889555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [423.890736] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [423.890898] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [423.891039] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [423.891177] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [423.891302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [423.891427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [423.891569] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810

<7> [423.903555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [423.903742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [423.903876] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)

<7> [423.903989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [423.904106] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [423.904217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.082868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.083316] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.094310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.095524] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.096128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.096619] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.097127] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.097649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.098269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.100268] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.100630] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.101030] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.101337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.104350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.201901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.206767] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.207159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.207559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.208258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.208622] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.208996] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.209726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.211504] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.211904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.232648] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.232801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.232923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [424.233788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.234951] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.235095] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.235232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.235370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.235505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [424.235636] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.235771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.236946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.237084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.243769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.244952] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.245091] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.245229] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.245370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.245529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.245766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.247323] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.247482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.247647] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.247781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.249262] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.273933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.276736] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.277100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.277463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.278200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.278729] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.279224] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.279833] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.281554] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.282062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.298325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.298507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.298665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [424.299370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.300556] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.300772] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.300953] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.301120] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.301269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [424.301401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.301528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.302704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.302909] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.303768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [424.308408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.309556] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.309745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.309885] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.310022] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.310182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.310435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.312046] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.312194] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.312352] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.312464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.314069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.338755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.341537] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.341952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.342348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.343194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.343580] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.344100] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.344636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.346654] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.347052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.365515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.365597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.393823] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [424.393833] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [424.393837] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [424.393840] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [424.393843] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [424.393847] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [424.393850] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [424.393854] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [424.394410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [424.394515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [424.395054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [424.395201] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [424.395218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.395360] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.403440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.404599] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.404773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.404912] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.405050] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.405213] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.405398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [424.405443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [424.405584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.407151] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.407319] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.407490] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.407618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.409121] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.433712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.436446] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.436774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.437106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.437729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.438114] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.438407] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.438919] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.440535] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.440867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.458222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.458328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.458452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [424.458579] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [424.459394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [424.459541] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [424.459662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.459837] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.466188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.467338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.467506] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.467648] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.467793] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.467973] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.468179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.468334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [424.469717] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.469883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.470041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.470152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.471616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.496253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.500799] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.501177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.501550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.502298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.502644] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.502996] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.503459] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.505170] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.505514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.521786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.521916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.522029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [424.522841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.524003] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.524147] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.524289] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.524426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.524563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [424.524704] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.524829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.526006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.526143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.531710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.532862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.533005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.533146] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.533283] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.533444] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.533674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.535253] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.535409] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.535575] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.535704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.537178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.561852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.564705] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.564932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.565275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.565995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.566325] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.566630] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.567127] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.568794] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.569100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.585318] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.585440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.585554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [424.586375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.587558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.587721] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.587852] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.587976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.588100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [424.588216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.588326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.589487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.589658] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.590529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [424.596321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.597505] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.597674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.597834] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.597998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.598160] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.598385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.599709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.599876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.600032] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.600144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.601690] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.626308] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.628164] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.628450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.628850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.629588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.629962] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.630294] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.630768] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.632388] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.632697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.649962] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.650071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.650207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [424.650347] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [424.651205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [424.651336] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [424.651457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.651598] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.657943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.659081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.659228] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.659367] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.659505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.659663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.659858] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [424.659882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [424.660016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.661574] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.661757] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.661923] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.662052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.664740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.689245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.693819] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.694193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.694570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.695296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.695645] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.695997] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.696541] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.698519] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.698897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.717353] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.717438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.717560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [424.717694] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [424.718590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [424.718736] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [424.718891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.719039] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.725376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.726517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.726685] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.726840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.726981] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.727141] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.727318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [424.727341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [424.727474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.728718] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.728885] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.729045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.729157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.730622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.755200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.757751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.758021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.758297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.759050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.759402] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.759774] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.760357] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.762123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.762441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.782030] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.782130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.782249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [424.782372] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [424.783297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [424.783464] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [424.783584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.783741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.788980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.790111] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.790273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.790414] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.790552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.790731] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.790933] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [424.790976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.791171] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [424.792608] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.792779] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.792950] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.793073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.794550] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.819165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.823773] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.824147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.824520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.825340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.825757] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.826161] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.826636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.828424] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.828786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.847305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.847389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.875975] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [424.875985] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [424.875989] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [424.875992] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [424.875995] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [424.875998] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [424.876001] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [424.876004] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [424.876568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [424.876687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [424.877351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [424.877464] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [424.877482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.877624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.886206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.887361] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.887527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.887669] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.887823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.888008] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.888188] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [424.888212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [424.888351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.889707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.889862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.890018] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.890130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.891603] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.916202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.918798] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.919191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.919590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.920419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.920815] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.921174] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.921629] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.923433] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.923736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [424.941069] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [424.941175] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [424.941307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [424.941442] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [424.942250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [424.942396] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [424.942518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [424.942663] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [424.948997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [424.950162] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.950329] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [424.950469] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.950605] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [424.950774] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [424.950985] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [424.951009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [424.951155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [424.952718] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [424.952880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [424.953050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [424.953174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [424.954655] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [424.979189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [424.983773] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [424.984166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [424.984561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [424.985307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [424.985706] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [424.986106] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [424.986602] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [424.988463] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [424.988798] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.006073] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.006180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.006304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.006428] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.007341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.007486] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.007609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.007769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.014132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.015297] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.015457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.015598] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.015751] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.015931] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.016124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [425.016146] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [425.016289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.017718] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.017881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.018055] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.018182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.019666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.044271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.046747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.047022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.047317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.048098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.048458] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.048815] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.049295] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.050997] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.051307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.068688] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.068772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.068895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.069019] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.069865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.070010] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.070133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.070281] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.075501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.076625] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.076800] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.076941] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.077078] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.077236] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.077420] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [425.077462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.077621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [425.079131] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.079284] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.079446] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.079561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.081050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.105662] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.108475] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.108816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.109190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.110138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.110519] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.110907] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.111453] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.113214] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.113531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.129791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.129875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.129992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.130113] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.130975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.131133] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.131257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.131403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.137725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.138876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.139040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.139179] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.139318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.139479] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.139667] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [425.139706] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [425.139878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.141375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.141539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.141739] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.141891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.143346] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.168014] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.170739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.171133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.171535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.172386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.172787] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.173203] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.173725] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.175749] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.176087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.192312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.192406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.220356] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [425.220366] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [425.220369] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [425.220372] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [425.220375] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [425.220378] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [425.220381] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [425.220385] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [425.221001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [425.221123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [425.221930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [425.222043] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [425.222060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.222199] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.230141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.231299] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.231441] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.231585] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.231731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.231889] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.232070] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [425.232092] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [425.232248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.233704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.233871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.234030] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.234144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.235617] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.260195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.262754] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.263116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.263481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.264162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.264511] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.264860] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.265321] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.267001] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.267320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.283563] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.283655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.283803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.283940] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.285777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.285910] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.286031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.286174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.292582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.293762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.293911] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.294051] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.294187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.294369] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.294570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.294747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [425.294771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [425.296273] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.296436] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.296608] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.296744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.298219] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.322776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.325604] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.325883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.326254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.326990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.327333] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.327675] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.328183] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.329883] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.330235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.346395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.346485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.346604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.346752] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.347638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.347788] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.347912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.348054] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.353252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.354403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.354544] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.354684] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.354823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.354983] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.355163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [425.355207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.355367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [425.356704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.356863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.357017] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.357127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.358593] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.383224] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.387791] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.388161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.388537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.389219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.389563] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.389906] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.390349] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.392226] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.392540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.411063] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.411168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.411303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.411426] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.412232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.412367] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.412488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.412650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.418982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.420143] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.420283] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.420424] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.420565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.420734] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.420931] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [425.420954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [425.421088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.422639] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.422822] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.422995] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.423122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.424598] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.449174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.453780] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.454179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.454576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.455295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.455671] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.456048] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.456516] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.458343] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.458726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.476047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.476126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.476249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.476372] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.477300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.477432] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.477558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.477713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.482903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.484050] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.484194] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.484334] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.484470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.484627] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.484822] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [425.484877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.485043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [425.486542] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.486710] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.486882] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.487010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.489697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.514299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.518808] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.519181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.519554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.520413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.520790] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.521144] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.521720] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.523705] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.524055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.541382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.541464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.570306] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [425.570315] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [425.570318] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [425.570321] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [425.570325] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [425.570328] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [425.570331] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [425.570334] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [425.570967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [425.571082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [425.571674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [425.571793] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [425.571810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.571950] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.580265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.581424] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.581566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.581721] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.581865] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.582046] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.582230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [425.582254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [425.582391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.583707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.583871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.584031] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.584143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.585612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.610200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.612751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.612962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.613185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.613802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.614153] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.614477] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.614962] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.616644] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.616950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.633070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.633152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.633273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.633396] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.634317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.634452] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.634576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.634737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.639955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.641078] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.641219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.641359] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.641499] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.641656] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.641861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [425.641910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.642069] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [425.643566] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.643740] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.643913] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.644040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.645694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.670149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.674828] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.675207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.675576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.676442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.676821] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.677166] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.677638] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.679629] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.679972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.697264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.697353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.697483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.697619] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.699579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.699765] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.699893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.700041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.705255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.706407] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.706548] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.706673] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.706816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.706982] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.707154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [425.707201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.707356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [425.708704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.708863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.709037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.709150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.711763] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.736377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.740779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.741152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.741524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.742403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.742772] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.743100] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.743555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.745249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.745569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.761743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.761850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.761968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.762089] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.763002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.763139] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.763263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.763408] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.768607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.769754] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.769896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.770038] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.770176] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.770337] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.770538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.770693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [425.770737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [425.772171] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.772339] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.772512] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.772640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.775417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.800092] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.804817] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.805191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.805566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.806286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.806635] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.807015] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.807497] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.809446] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.809808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.824932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.825024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.825145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.825269] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.826099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.826233] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.826354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.826496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.832813] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.833976] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.834122] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.834262] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.834399] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.834556] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.834737] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [425.834769] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [425.834905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.836376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.836536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.836731] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.836858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.839672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.864257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.866781] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.867143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.867519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.868213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.868561] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.868931] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.869407] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.871339] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.871670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.890118] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.890198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.918057] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [425.918067] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [425.918070] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [425.918073] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [425.918077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [425.918080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [425.918083] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [425.918086] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [425.918711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [425.918833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [425.919586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [425.919714] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [425.919731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.919875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.926882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.928004] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.928163] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.928294] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.928417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.928577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.928808] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [425.928831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [425.928976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.930373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.930531] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.930697] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.930833] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.932313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [425.956893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [425.959659] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [425.959959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [425.960252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [425.960837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [425.961114] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [425.961375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [425.961760] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [425.963140] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [425.963393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [425.980617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [425.980730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [425.980855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [425.980978] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [425.981867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [425.982000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [425.982109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [425.982237] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [425.988598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [425.989748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.989893] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [425.990026] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.990151] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [425.990297] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [425.990472] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [425.990495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [425.990632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [425.992198] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [425.992351] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [425.992522] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [425.992635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [425.994122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.018645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.023822] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.024179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.024533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.025212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.025586] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.025967] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.026463] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.028207] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.028485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.044714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.044809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.044928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.045049] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.045875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.046008] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.046124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.046257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.051466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.052611] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.052762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.052893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.053017] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.053162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.053332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [426.053376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.053532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [426.054704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.054865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.055037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.055165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.057750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.082350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.086817] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.087190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.087568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.088275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.088618] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.088972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.089444] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.091191] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.091533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.110076] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.110167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.110286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.110409] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.111242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.111402] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.111525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.111669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.116887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.118038] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.118199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.118339] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.118477] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.118636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.118858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.119016] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [426.119058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [426.120379] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.120543] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.120722] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.120872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.123669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.148335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.152826] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.153202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.153571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.154312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.154719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.155094] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.155589] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.157376] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.157741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.176176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.176276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.176396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.176521] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.177441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.177601] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.177743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.177910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.183132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.184251] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.184414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.184553] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.184703] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.184882] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.185064] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [426.185108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.185273] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [426.186710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.186878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.187051] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.187178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.189748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.214373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.218730] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.219103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.219477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.220291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.220708] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.221115] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.221597] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.223460] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.223804] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.241103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.241184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.269185] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [426.269195] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [426.269198] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [426.269201] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [426.269205] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [426.269208] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [426.269211] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [426.269214] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [426.269754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [426.269888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [426.270544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [426.270653] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [426.270669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.270819] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.279022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.280160] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.280318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.280447] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.280577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.280744] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.280960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [426.280992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [426.281130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.282702] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.282866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.283029] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.283143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.284612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.309178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.311737] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.311876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.312024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.312435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.312763] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.313097] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.313488] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.315000] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.315271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.331433] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.331518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.331639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.331776] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.332604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.332752] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.332895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.333042] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.338245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.339387] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.339558] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.339691] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.339852] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.340006] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.340213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.340367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [426.340413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [426.341704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.341864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.342034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.342158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.343638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.368162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.372822] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.373178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.373531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.374413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.374763] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.375118] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.375564] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.377312] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.377626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.394903] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.394983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.395100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.395226] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.397217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.397360] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.397480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.397628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.402891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.404035] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.404200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.404331] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.404458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.404608] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.404801] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [426.404862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.405062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [426.406373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.406539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.406717] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.406865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.409665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.434339] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.436746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.437103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.437475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.438225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.438578] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.438938] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.439435] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.441175] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.441492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.457735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.457825] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.457950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.458074] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.458897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.459059] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.459182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.459326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.465691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.466809] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.466978] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.467107] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.467232] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.467377] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.467553] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [426.467592] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [426.467747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.469342] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.469506] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.469674] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.469814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.471318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.495918] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.498748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.499090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.499446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.500220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.500532] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.500851] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.501304] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.502805] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.503050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.520348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.520430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.520551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.520673] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.521512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.521664] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.521809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.521979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.527178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.528324] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.528492] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.528621] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.528763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.528941] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.529161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.529318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [426.529371] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [426.530706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.530871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.531044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.531169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.532648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.557197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.559785] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.560170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.560546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.561463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.561843] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.562223] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.562675] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.564379] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.564652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.580857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.580965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.609032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [426.609041] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [426.609045] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [426.609047] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [426.609051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [426.609054] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [426.609057] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [426.609061] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [426.609589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [426.609706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [426.610328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [426.610435] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [426.610452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.610601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.618753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.619901] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.620065] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.620193] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.620321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.620482] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.620652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [426.620675] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [426.620820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.622372] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.622536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.622716] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.622866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.624340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.648959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.651725] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.652016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.652315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.653014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.653302] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.653559] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.653988] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.655367] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.655625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.674000] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.674082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.674202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.674322] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.675268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.675406] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.675518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.675650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.680874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.682003] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.682169] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.682296] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.682423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.682570] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.682767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [426.682839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.682983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [426.684373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.684536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.684709] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.684856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.686323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.710944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.713740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.713981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.714264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.715024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.715362] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.715668] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.716143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.717676] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.717966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.735286] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.735368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.735491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.735611] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.736465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.736615] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.736750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.736918] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.743242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.744395] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.744553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.744688] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.744848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.744996] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.745186] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [426.745222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [426.745364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.746709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.746876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.747051] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.747179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.748664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.773290] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.777830] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.778186] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.778536] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.779247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.779585] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.779915] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.780401] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.782204] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.782557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.798745] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.798839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.798957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.799079] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.800013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.800157] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.800280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.800424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.807894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.809048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.809205] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.809333] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.809460] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.809609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.809786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [426.809812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [426.809989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.811558] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.811737] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.811904] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.812034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.813506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.838108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.840742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.840974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.841220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.842067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.842395] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.842733] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.843204] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.844737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.845019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.862362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.862448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.862570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [426.862714] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [426.863519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [426.863652] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [426.863788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.863957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.870287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.871439] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.871614] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.871766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.871923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.872069] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.872268] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [426.872297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [426.872434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.873706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.873867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.874036] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.874166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.875630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.900183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.902787] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.903150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.903526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.904354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.904725] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.905105] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.905572] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.907319] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.907576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [426.923769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [426.923855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [426.951760] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [426.951771] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [426.951774] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [426.951777] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [426.951788] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [426.951791] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [426.951794] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [426.951798] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [426.952326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [426.952432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [426.952991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [426.953102] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [426.953119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [426.953264] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [426.960522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [426.961651] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.961833] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [426.961977] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.962104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [426.962250] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [426.962426] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [426.962449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [426.962588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [426.964156] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [426.964318] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [426.964479] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [426.964591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [426.966075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [426.990628] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [426.993388] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [426.993654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [426.993968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [426.994766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [426.995073] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [426.995324] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [426.995705] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [426.996927] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [426.997147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.012154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.012238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.012363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.012487] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.013337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.013466] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.013582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.013751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.020105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.021255] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.021425] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.021557] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.021687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.021867] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.022057] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [427.022081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [427.022220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.023706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.023870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.024041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.024157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.025628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.050219] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.052746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.053084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.053434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.054141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.054467] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.054797] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.055270] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.056887] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.057192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.074462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.074546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.074665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.074817] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.075718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.075877] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.076003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.076145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.081337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.082477] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.082643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.082806] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.082961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.083112] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.083302] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [427.083346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.083503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [427.084705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.084884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.085050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.085171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.086645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.111205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.113806] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.114173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.114544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.115540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.115898] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.116254] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.116700] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.118337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.118579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.133621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.133730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.133860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.133984] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.134783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.134941] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.135052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.135184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.141512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.142668] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.142825] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.142961] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.143086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.143231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.143423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [427.143446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [427.143586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.145156] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.145317] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.145474] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.145586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.147074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.171623] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.174466] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.174812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.175158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.175807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.176226] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.176535] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.177019] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.178395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.178667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.196016] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.196100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.196222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.196342] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.197186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.197340] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.197464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.197610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.202815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.203970] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.204134] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.204273] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.204410] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.204571] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.204765] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [427.204826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.205007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [427.206377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.206543] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.206729] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.206876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.208342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.232937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.235737] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.236062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.236410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.237280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.237609] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.237946] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.238420] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.239898] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.240166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.255216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.255296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.283303] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [427.283312] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [427.283316] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [427.283318] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [427.283322] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [427.283325] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [427.283328] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [427.283331] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [427.283959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [427.284095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [427.284731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [427.284872] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [427.284889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.285030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.291917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.293066] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.293231] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.293371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.293507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.293665] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.293878] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [427.293912] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [427.294058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.295622] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.295796] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.295969] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.296084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.298745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.323375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.327813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.328148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.328483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.329180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.329491] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.329803] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.330267] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.331756] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.332054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.349415] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.349499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.349618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.349762] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.350575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.350720] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.350867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.351014] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.356236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.357363] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.357525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.357653] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.357799] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.357975] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.358161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [427.358206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.358362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [427.359705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.359870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.360034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.360153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.362749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.387343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.389746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.389977] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.390225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.390938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.391309] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.391635] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.392098] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.393754] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.394048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.410250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.410355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.410474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.410595] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.411420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.411575] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.411706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.411884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.418229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.419374] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.419536] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.419675] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.419816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.419996] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.420185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [427.420208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [427.420344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.421711] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.421878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.422052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.422180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.423668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.448228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.450773] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.451139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.451518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.452348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.452733] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.453116] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.453593] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.455453] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.455729] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.473038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.473146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.473270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.473390] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.474208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.474366] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.474490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.474636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.479863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.480993] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.481162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.481304] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.481442] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.481600] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.481801] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [427.481861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.482022] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [427.483375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.483538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.483714] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.483863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.485339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.509965] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.512701] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.512891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.513090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.513883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.514268] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.514578] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.515102] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.516636] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.516949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.533139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.533245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.533368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.533492] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.534309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.534464] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.534578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.534739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.541094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.542244] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.542408] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.542538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.542666] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.542846] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.543080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.543233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [427.543269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [427.544710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.544877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.545045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.545160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.546626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.571195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.573762] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.574105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.574459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.575183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.575520] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.575853] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.576332] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.577917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.578224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.595572] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.595686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.623478] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [427.623488] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [427.623491] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [427.623494] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [427.623497] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [427.623500] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [427.623503] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [427.623507] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [427.623984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [427.624100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [427.624906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [427.625016] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [427.625032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.625171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.633414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.634583] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.634730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.634866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.634993] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.635142] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.635314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [427.635337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [427.635473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.637031] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.637187] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.637357] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.637472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.639748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.664385] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.666779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.667139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.667513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.668214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.668565] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.668916] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.669363] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.671031] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.671354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.688614] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.688706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.688840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.688972] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.689864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.689992] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.690114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.690261] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.696575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.697756] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.697900] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.698025] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.698147] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.698292] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.698466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [427.698489] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [427.698629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.700203] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.700362] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.700532] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.700655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.702160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.726783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.729612] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.729898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.730272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.731013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.731358] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.731698] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.732150] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.733727] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.734031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.750170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.750247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.750368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.750486] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.751410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.751541] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.751663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.751832] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.757027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.758174] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.758317] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.758443] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.758568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.758726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.758907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [427.758951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.759107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [427.760604] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.760770] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.760932] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.761048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.762514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.787113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.789739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.789962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.790195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.790967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.791288] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.791593] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.792048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.793630] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.793920] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.808986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.809064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.809186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.809306] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.810155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.810288] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.810407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.810548] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.816873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.818029] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.818174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.818313] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.818448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.818604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.818778] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [427.818800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [427.818935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.820373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.820535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.820725] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.820855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.822340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.846957] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.849720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.850065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.850417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.851077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.851404] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.851724] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.852157] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.853833] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.854134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.870357] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.870436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.870556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [427.870688] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [427.871526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [427.871661] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [427.871793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.871937] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.878274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.879430] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.879576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.879711] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.879849] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.879999] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.880176] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [427.880207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [427.880345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.881704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.881863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.882034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.882145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.884758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [427.909361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [427.913815] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [427.914189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [427.914557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [427.915245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [427.915591] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [427.915947] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [427.916427] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [427.918164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [427.918496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [427.936918] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [427.936996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [427.964987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [427.964997] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [427.965000] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [427.965003] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [427.965007] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [427.965010] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [427.965013] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [427.965016] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [427.965548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [427.965651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [427.966240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [427.966350] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [427.966367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [427.966506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [427.973722] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [427.974840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.974984] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [427.975127] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.975265] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [427.975426] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [427.975605] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [427.975627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [427.975796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [427.977365] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [427.977516] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [427.977693] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [427.977819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [427.979300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.003886] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.006712] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.007025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.007337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.008089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.008381] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.008650] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.009063] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.010500] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.010776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.026967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.027046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.027165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.027285] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.028129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.028257] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.028369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.028497] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.034839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.036008] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.036150] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.036291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.036431] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.036590] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.036780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [428.036804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [428.036951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.038374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.038534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.038711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.038837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.040308] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.064943] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.067725] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.068094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.068470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.069318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.069662] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.070012] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.070462] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.072181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.072489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.088738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.088819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.088945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.089068] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.090949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.091083] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.091206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.091349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.097760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.098919] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.099058] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.099202] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.099341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.099500] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.099689] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [428.099712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [428.099851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.101375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.101535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.101714] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.101838] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.103309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.127897] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.130695] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.130879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.131076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.131738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.132085] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.132412] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.132885] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.134479] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.134790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.150909] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.150990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.151106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.151225] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.152161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.152304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.152427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.152569] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.158880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.160041] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.160186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.160327] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.160463] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.160621] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.160803] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [428.160826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [428.160966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.162375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.162536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.162712] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.162835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.164298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.188943] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.191708] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.191894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.192091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.192734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.193152] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.193478] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.193979] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.195695] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.195999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.213267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.213350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.213470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.213590] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.214523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.214664] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.214797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.214959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.220161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.221302] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.221460] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.221589] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.221733] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.221909] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.222087] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [428.222130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.222295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [428.223704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.223870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.224039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.224163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.225648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.250229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.252774] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.253135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.253505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.254257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.254588] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.254928] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.255395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.256968] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.257257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.272293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.272371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.300157] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [428.300168] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [428.300171] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [428.300175] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [428.300178] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [428.300182] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [428.300185] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [428.300189] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [428.300904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [428.301017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [428.301650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [428.301770] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [428.301786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.301926] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.309000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.310122] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.310292] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.310437] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.310576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.310754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.310951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [428.310973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [428.311112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.312676] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.312852] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.313019] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.313133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.314601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.339165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.341738] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.341907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.342086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.342702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.343034] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.343280] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.343629] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.345002] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.345234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.361294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.361372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.361491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.361614] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.362553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.362705] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.362853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.362992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.369307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.370462] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.370620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.370762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.370915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.371062] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.371248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [428.371288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [428.371426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.372707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.372869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.373041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.373165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.374631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.399250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.403818] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.404150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.404484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.405178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.405537] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.405925] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.406452] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.408349] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.408631] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.425901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.425984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.426102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.426223] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.427167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.427297] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.427409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.427542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.432748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.433893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.434061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.434190] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.434315] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.434459] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.434636] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [428.434688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.434867] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [428.436374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.436538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.436707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.436862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.438339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.463009] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.465743] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.466108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.466483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.467474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.467857] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.468245] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.468668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.470246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.470553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.485651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.485766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.485889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.486012] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.486831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.486965] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.487076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.487209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.493537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.494699] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.494858] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.494986] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.495111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.495256] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.495441] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [428.495465] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [428.495607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.497173] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.497337] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.497509] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.497635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.499132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.523768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.526598] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.526938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.527286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.528045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.528394] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.528729] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.529217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.530673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.530956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.547135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.547217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.547340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.547460] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.548302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.548450] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.548572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.548738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.553975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.555095] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.555263] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.555401] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.555537] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.555707] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.555904] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [428.555970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.556134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [428.557633] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.557814] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.557977] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.558100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.559567] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.584196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.586768] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.587030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.587305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.588015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.588323] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.588611] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.589067] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.590697] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.590956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.607121] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.607211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.635056] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [428.635066] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [428.635069] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [428.635072] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [428.635075] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [428.635078] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [428.635081] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [428.635085] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [428.635613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [428.635733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [428.636380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [428.636486] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [428.636504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.636645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.643882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.645002] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.645168] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.645300] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.645428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.645581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.645786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [428.645820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [428.645964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.647378] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.647540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.647722] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.647869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.649342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.673971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.676713] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.676914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.677146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.677895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.678196] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.678447] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.678848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.680162] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.680392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.695392] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.695476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.695597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.695742] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.696555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.696705] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.696855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.697001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.703356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.704478] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.704642] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.704786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.704944] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.705091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.705278] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [428.705301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [428.705442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.706705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.706867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.707033] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.707157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.708640] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.733201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.735771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.736136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.736509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.737321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.737660] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.738003] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.738486] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.740017] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.740268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.757575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.757655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.757801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.757969] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.758749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.758908] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.759024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.759172] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.764384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.765510] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.765672] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.765818] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.765974] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.766117] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.766295] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [428.766338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.766499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [428.767706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.767867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.768039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.768163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.769648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.794203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.796782] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.797146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.797520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.798352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.798716] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.799096] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.799527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.801104] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.801384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.818594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.818687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.818848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.818974] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.819871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.820012] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.820136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.820268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.826586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.827754] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.827914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.828042] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.828166] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.828313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.828487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [428.828525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [428.828673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.830252] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.830413] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.830582] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.830720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.832225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.856807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.859628] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.860021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.860394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.861146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.861533] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.861902] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.862405] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.864131] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.864445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.880668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.880791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.880927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [428.881060] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [428.881873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [428.882003] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [428.882117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.882251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.887447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.888594] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.888752] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.888882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.889012] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.889163] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.889354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [428.889396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.889552] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [428.891064] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.891222] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.891389] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.891510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.893740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [428.918333] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [428.920741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [428.920936] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [428.921137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [428.921830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [428.922215] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [428.922524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [428.923048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [428.924717] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [428.925009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [428.940068] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [428.940147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [428.968152] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [428.968162] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [428.968165] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [428.968168] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [428.968172] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [428.968175] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [428.968178] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [428.968182] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [428.968722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [428.968838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [428.969444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [428.969550] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [428.969567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [428.969713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [428.977916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [428.979040] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.979207] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [428.979351] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.979489] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [428.979649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [428.979855] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [428.979881] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [428.980056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [428.981613] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [428.981814] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [428.981982] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [428.982098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [428.983569] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.008134] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.010752] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.011075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.011411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.012098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.012402] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.012696] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.013137] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.014522] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.014808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.029851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.029934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.030058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.030180] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.031041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.031171] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.031282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.031415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.036633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.037755] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.037916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.038044] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.038171] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.038320] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.038500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [429.038542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.038700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [429.040231] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.040402] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.040580] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.040712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.042223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.066815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.069585] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.069776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.069958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.070477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.070799] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.071123] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.071515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.072954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.073225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.089390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.089470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.089591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.089734] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.090551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.090703] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.090855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.090999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.096218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.097340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.097501] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.097631] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.097776] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.097961] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.098132] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [429.098201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.098358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [429.099704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.099871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.100044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.100170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.101633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.126203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.128746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.129065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.129392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.130079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.130419] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.130777] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.131238] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.132920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.133228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.149414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.149493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.149613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.149761] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.150577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.150717] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.150860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.151012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.157338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.158482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.158627] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.158776] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.158916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.159064] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.159247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [429.159269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [429.159409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.160704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.160865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.161024] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.161139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.162607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.187218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.189764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.190128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.190502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.191250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.191603] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.191963] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.192476] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.194056] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.194366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.211726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.211830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.211954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.212081] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.212904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.213042] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.213155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.213286] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.218507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.219628] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.219813] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.219957] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.220084] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.220231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.220398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [429.220443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.220606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [429.222119] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.222288] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.222461] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.222579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.224058] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.248655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.251446] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.251797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.252143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.252981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.253332] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.253645] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.254107] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.255527] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.255809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.271993] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.272076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.300105] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [429.300115] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [429.300119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [429.300122] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [429.300126] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [429.300129] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [429.300132] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [429.300136] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [429.300670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [429.300799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [429.301424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [429.301531] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [429.301548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.301695] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.308657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.309780] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.309943] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.310072] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.310200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.310349] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.310538] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [429.310560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [429.310690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.312290] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.312457] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.312631] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.312772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.314280] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.338880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.341637] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.341797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.341953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.342575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.342847] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.343144] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.343487] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.344803] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.345031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.360037] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.360118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.360238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.360364] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.361212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.361364] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.361487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.361631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.367984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.369132] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.369302] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.369444] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.369581] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.369748] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.369944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [429.369968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [429.370114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.371685] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.371848] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.372017] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.372142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.373622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.398209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.402820] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.403173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.403534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.404289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.404645] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.404999] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.405500] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.407152] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.407464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.423698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.423803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.423923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.424044] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.424893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.425022] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.425136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.425270] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.430479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.431603] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.431786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.431936] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.432061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.432221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.432402] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [429.432453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.432611] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [429.434115] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.434287] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.434458] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.434582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.436075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.460646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.463419] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.463794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.464166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.465115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.465469] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.465826] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.466331] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.468197] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.468467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.486845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.486929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.487052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.487173] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.488106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.488248] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.488359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.488489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.493706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.494837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.495002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.495131] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.495263] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.495422] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.495602] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [429.495648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.495832] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [429.497374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.497551] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.497721] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.497868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.499373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.523964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.526793] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.527158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.527528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.528267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.528597] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.528924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.529400] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.531006] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.531282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.547391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.547471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.547593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.547741] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.548637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.548792] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.548939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.549073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.555415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.556558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.556727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.556860] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.556988] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.557136] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.557320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [429.557351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [429.557492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.559058] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.559228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.559403] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.559527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.561750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.586352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.588752] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.588993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.589243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.589841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.590242] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.590576] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.591106] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.592814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.593095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.610344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.610423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.638278] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [429.638288] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [429.638291] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [429.638294] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [429.638298] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [429.638301] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [429.638304] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [429.638307] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [429.638937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [429.639053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [429.639896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [429.640004] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [429.640021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.640162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.648205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.649335] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.649501] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.649643] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.649787] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.649965] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.650139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [429.650162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [429.650303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.651706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.651872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.652038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.652165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.653642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.678197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.680739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.681031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.681340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.682057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.682360] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.682639] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.683092] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.684575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.684840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.701001] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.701083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.701201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.701324] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.702181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.702316] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.702425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.702554] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.707761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.708909] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.709079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.709209] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.709334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.709479] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.709657] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [429.709718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.709893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [429.711377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.711539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.711709] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.711857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.713323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.737952] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.740699] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.740863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.741032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.741754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.742127] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.742418] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.742874] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.744401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.744661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.759722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.759823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.759946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.760070] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.760906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.761043] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.761154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.761284] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.767595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.768772] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.768934] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.769062] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.769187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.769335] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.769513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [429.769536] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [429.769689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.771280] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.771440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.771600] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.771730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.773233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.797835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.800766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.801106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.801459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.802176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.802521] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.802854] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.803379] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.804804] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.805081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.821266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.821349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.821470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.821590] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.822444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.822591] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.822729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.822896] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.828099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.829237] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.829400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.829528] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.829655] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.829830] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.830060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.830216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [429.830261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [429.831706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.831876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.832037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.832153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.833618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.858190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.860791] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.861161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.861537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.862545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.862922] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.863284] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.863746] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.865311] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.865598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.881769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.881877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.881996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [429.882119] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [429.882945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [429.883090] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [429.883212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.883354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.889689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.890841] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.890997] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.891128] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.891254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.891401] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.891565] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [429.891595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [429.891730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.893320] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.893484] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.893657] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.893800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.895298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [429.919848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [429.922621] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [429.922989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [429.923342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [429.924040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [429.924369] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [429.924672] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [429.925152] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [429.926908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [429.927217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [429.944577] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [429.944657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [429.972784] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [429.972794] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [429.972797] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [429.972800] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [429.972803] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [429.972807] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [429.972810] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [429.972813] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [429.973454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [429.973561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [429.974181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [429.974325] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [429.974343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [429.974481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [429.981256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [429.982403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.982578] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [429.982727] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.982887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [429.983044] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [429.983223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [429.983246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [429.983382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [429.984704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [429.984868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [429.985034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [429.985148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [429.986618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.011187] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.013739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.013904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.014075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.014515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.014808] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.015106] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.015458] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.016758] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.017006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.033170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.033270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.033394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.033516] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.034346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.034485] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.034594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.034756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.040008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.041141] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.041306] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.041438] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.041566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.041734] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.041952] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [430.041994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.042160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [430.043664] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.043840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.044012] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.044129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.045595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.070236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.072779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.073120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.073470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.074434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.074786] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.075150] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.075561] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.077045] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.077338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.092407] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.092490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.092610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.092750] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.093558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.093710] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.093837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.093976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.100286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.101453] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.101596] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.101745] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.101888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.102035] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.102214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [430.102237] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [430.102370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.103705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.103866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.104038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.104151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.105614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.130206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.132749] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.132990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.133260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.133930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.134306] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.134611] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.135093] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.136592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.136870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.154102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.154183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.154307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.154431] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.155366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.155509] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.155624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.155777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.161006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.162153] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.162316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.162443] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.162569] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.162735] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.162967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.163123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [430.163167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [430.164604] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.164774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.164937] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.165053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.166520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.191102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.193765] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.194143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.194521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.195431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.195806] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.196170] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.196605] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.198193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.198442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.213476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.213556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.213675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.213819] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.214635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.214789] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.214934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.215077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.221433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.222557] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.222726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.222863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.222987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.223133] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.223321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [430.223353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [430.223495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.225071] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.225235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.225408] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.225533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.227738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.252334] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.254745] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.254965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.255201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.256040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.256370] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.256676] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.257157] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.258708] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.259002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.275206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.275286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.303208] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [430.303218] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [430.303221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [430.303224] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [430.303228] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [430.303231] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [430.303234] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [430.303237] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [430.303866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [430.304003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [430.304663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [430.304782] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [430.304800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.304964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.313030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.314166] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.314338] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.314482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.314624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.314805] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.315007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [430.315029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [430.315168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.316719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.316883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.317041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.317154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.318622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.343189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.345764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.346070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.346383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.347030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.347325] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.347597] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.348025] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.349779] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.350044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.366222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.366301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.366426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.366553] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.367399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.367545] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.367671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.367841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.374212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.375365] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.375525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.375654] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.375801] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.375977] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.376159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [430.376183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [430.376322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.377708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.377873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.378041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.378155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.379624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.404243] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.406768] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.407089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.407421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.408112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.408433] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.408759] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.409226] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.410642] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.410930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.429298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.429380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.429498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.429621] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.430558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.430731] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.430876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.431022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.437346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.438500] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.438664] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.438811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.438974] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.439122] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.439292] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [430.439315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [430.439457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.440705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.440868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.441038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.441161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.442633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.467257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.469772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.470111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.470459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.471162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.471487] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.471827] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.472312] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.474073] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.474394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.490651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.490755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.490887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.491010] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.491832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.491989] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.492110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.492253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.498570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.499726] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.499896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.500036] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.500173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.500333] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.500514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [430.500538] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [430.500689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.502279] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.502444] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.502615] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.502766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.504267] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.528802] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.533813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.534190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.534560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.535303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.535661] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.536053] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.536609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.538464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.538797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.555023] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.555105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.555231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.555357] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.556188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.556347] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.556469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.556614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.562938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.564096] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.564261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.564402] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.564538] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.564711] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.564911] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [430.564944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [430.565083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.566641] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.566829] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.567001] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.567127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.569750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.594412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.596702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.596901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.597122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.597623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.598017] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.598417] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.598925] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.600764] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.601087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.618370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.618452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.646415] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [430.646425] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [430.646428] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [430.646431] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [430.646434] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [430.646438] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [430.646441] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [430.646444] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [430.646970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [430.647090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [430.647856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [430.647976] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [430.647993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.648136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.655079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.656205] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.656372] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.656517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.656656] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.656828] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.657052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.657204] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [430.657227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [430.658706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.658875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.659048] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.659177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.661739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.686311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.690808] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.691187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.691562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.692294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.692654] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.693041] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.693571] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.695414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.695763] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.713047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.713128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.713248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.713368] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.714299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.714452] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.714573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.714731] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.721095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.722234] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.722403] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.722544] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.722688] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.722876] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.723081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.723234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [430.723257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [430.724718] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.724878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.725049] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.725172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.727747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.752384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.756821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.757219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.757591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.758326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.758716] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.759122] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.759604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.761478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.761850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.778111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.778193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.778317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.778442] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.779294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.779434] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.779554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.779709] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.786069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.787221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.787385] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.787525] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.787664] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.787839] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.788043] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [430.788067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [430.788208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.789719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.789880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.790039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.790155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.792746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.817363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.821807] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.822184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.822560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.823316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.823701] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.824089] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.824587] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.826596] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.826970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.843236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.843321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.843442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.843569] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.844413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.844558] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.844689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.844850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.851193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.852330] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.852505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.852646] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.852793] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.852978] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.853160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [430.853184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [430.853317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.854720] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.854885] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.855056] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.855178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.857761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.882418] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.886819] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.887214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.887609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.888457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.888857] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.889273] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.889775] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.891642] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.892010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.909409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.909491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [430.909614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [430.909752] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [430.910578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [430.910729] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [430.910872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [430.911017] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [430.917358] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [430.918497] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.918665] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [430.918816] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.918965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [430.919129] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [430.919310] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [430.919341] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [430.919477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [430.920719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [430.920882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [430.921038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [430.921152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [430.923749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [430.948385] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [430.952832] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [430.953204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [430.953575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [430.954312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [430.954670] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [430.955031] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [430.955569] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [430.957408] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [430.957766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [430.976209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [430.976317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.004065] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [431.004075] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [431.004078] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [431.004081] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [431.004085] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [431.004088] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [431.004091] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [431.004094] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [431.004625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [431.004768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [431.005434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [431.005551] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [431.005568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.005718] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.012891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.014037] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.014205] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.014347] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.014485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.014644] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.014834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [431.014868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [431.015019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.016586] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.016765] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.016938] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.017062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.019746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.044364] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.048818] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.049196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.049570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.050413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.050808] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.051210] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.051739] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.053502] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.053843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.071139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.071224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.071344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.071463] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.072393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.072550] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.072672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.072839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.078068] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.079205] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.079371] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.079509] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.079647] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.079821] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.080015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [431.080058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.080216] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [431.081706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.081870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.082040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.082164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.084754] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.109353] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.113771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.114136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.114512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.115508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.115899] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.116327] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.116866] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.118658] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.118997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.137419] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.137503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.137621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.137775] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.138664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.138815] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.138960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.139110] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.145433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.146585] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.146763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.146903] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.147039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.147201] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.147384] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [431.147407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [431.147544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.149109] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.149275] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.149446] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.149570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.151050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.175189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.179723] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.180102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.180473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.181469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.181873] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.182301] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.182786] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.184615] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.184996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.203459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.203568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.203701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.203842] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.204733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.204880] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.205005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.205149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.210348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.211487] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.211652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.211806] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.211957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.212125] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.212308] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [431.212351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.212507] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [431.213709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.213869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.214037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.214164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.215644] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.240217] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.242742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.243106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.243481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.244221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.244575] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.244924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.245428] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.247393] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.247743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.263974] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.264057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.264180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.264300] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.265153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.265291] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.265405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.265536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.271870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.273025] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.273187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.273328] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.273465] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.273624] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.273834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [431.273865] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [431.274037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.275586] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.275783] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.275953] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.276068] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.277537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.302158] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.304758] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.305032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.305351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.306142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.306472] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.306812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.307301] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.308845] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.309109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.325204] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.325288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.353062] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [431.353073] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [431.353077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [431.353080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [431.353084] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [431.353087] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [431.353090] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [431.353094] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [431.353628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [431.353781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [431.354412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [431.354521] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [431.354538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.354692] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.363003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.364157] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.364320] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.364463] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.364602] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.364781] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.364991] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [431.365015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [431.365147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.366722] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.366887] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.367055] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.367173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.368651] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.393278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.395758] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.396100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.396454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.397246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.397538] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.397833] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.398231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.399605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.399890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.417135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.417216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.417337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.417458] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.418390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.418538] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.418651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.418826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.425213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.426360] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.426521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.426661] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.426810] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.426985] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.427181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.427359] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [431.427378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [431.428708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.428890] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.429050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.429168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.430645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.455211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.457736] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.457912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.458094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.458855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.459218] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.459509] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.459964] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.461622] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.461895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.478070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.478149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.478270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.478392] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.479238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.479400] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.479514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.479647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.484871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.485999] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.486166] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.486297] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.486423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.486567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.486764] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [431.486821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.486977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [431.488380] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.488542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.488718] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.488863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.490337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.514938] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.517706] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.517932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.518165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.518840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.519213] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.519502] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.519983] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.521568] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.521855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.538041] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.538120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.538240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.538360] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.539208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.539360] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.539469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.539604] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.544800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.545946] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.546115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.546243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.546365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.546514] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.546713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [431.546765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [431.546927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.548376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.548537] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.548720] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.548867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.550337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.574997] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.577718] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.578061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.578411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.579221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.579657] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.579993] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.580414] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.582093] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.582372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.599585] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.599667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.599800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.599959] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.600853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.601000] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.601123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.601256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.606467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.607589] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.607767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.607906] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.608035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.608182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.608350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [431.608396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.608560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [431.610071] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.610235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.610397] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.610510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.612740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.637347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.639746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.639979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.640225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.640803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.641213] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.641533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.642048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.643767] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.644056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.661400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.661480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.689420] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [431.689430] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [431.689434] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [431.689436] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [431.689440] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [431.689443] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [431.689446] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [431.689449] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [431.689983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [431.690123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [431.690953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [431.691088] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [431.691105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.691247] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.698039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.699184] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.699356] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.699498] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.699640] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.699812] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.700050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.700205] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [431.700228] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [431.701705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.701867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.702030] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.702145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.703618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.728148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.730727] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.731027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.731326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.732020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.732307] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.732575] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.732992] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.734419] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.734673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.750777] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.750883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.751007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.751132] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.752042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.752185] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.752307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.752447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.758805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.759930] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.760097] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.760241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.760378] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.760537] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.760735] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [431.760770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [431.760918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.762377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.762527] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.762697] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.762845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.764314] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.788862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.791665] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.792064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.792447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.793232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.793569] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.793914] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.794392] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.795920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.796156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.814584] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.814666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.814808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.814964] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.815752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.815915] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.816041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.816188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.821410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.822533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.822704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.822847] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.822971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.823120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.823300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [431.823342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.823501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [431.824711] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.824872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.825042] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.825169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.826649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.851301] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.853767] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.854108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.854466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.855352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.855710] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.856063] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.856499] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.858043] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.858339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.874542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.874621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.874792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.874963] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.875783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.875941] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.876060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.876191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.882549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.883662] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.883821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.883986] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.884115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.884260] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.884433] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [431.884456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [431.884596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.886170] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.886336] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.886500] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.886613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.888091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.912628] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.915402] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.915588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.915886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.916555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.916908] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.917261] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.917708] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.919230] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.919489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.935597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.935710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [431.935841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [431.935966] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [431.936875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [431.937009] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [431.937121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [431.937252] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [431.942468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [431.943600] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.943796] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [431.943934] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.944060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [431.944206] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [431.944397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [431.944546] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [431.944599] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [431.946037] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [431.946207] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [431.946369] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [431.946487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [431.948746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [431.973321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [431.975710] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [431.975904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [431.976109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [431.976592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [431.976938] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [431.977279] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [431.977708] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [431.979403] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [431.979673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [431.998079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [431.998168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.026330] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [432.026340] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [432.026343] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [432.026346] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [432.026349] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [432.026352] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [432.026355] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [432.026359] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [432.027013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [432.027133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [432.027854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [432.028006] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [432.028023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.028161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.035965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.037115] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.037257] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.037400] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.037528] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.037676] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.037873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [432.037896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [432.038045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.039629] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.039816] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.039992] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.040108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.041578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.066169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.068696] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.068862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.069013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.069420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.069777] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.070125] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.070527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.071825] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.072110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.089359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.089443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.089565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.089700] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.091665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.091840] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.091960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.092095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.097350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.098493] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.098656] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.098807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.098961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.099116] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.099299] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [432.099350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.099494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [432.100706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.100871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.101047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.101162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.103752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.128338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.132816] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.133194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.133567] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.134560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.134974] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.135381] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.135921] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.137784] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.138137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.154348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.154433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.154553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.154673] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.156599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.156774] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.156897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.157032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.162275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.163399] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.163560] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.163707] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.163874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.164029] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.164219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [432.164261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.164417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [432.165706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.165865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.166038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.166164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.167643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.192212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.194748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.194893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.195046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.195552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.195944] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.196334] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.196797] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.198077] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.198407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.215712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.215816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.215950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.216086] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.216976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.217112] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.217225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.217357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.223715] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.224847] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.225015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.225146] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.225273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.225423] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.225611] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [432.225634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [432.225794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.227376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.227540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.227715] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.227859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.230690] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.255311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.257776] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.258116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.258462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.259177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.259508] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.259839] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.260277] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.262043] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.262337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.279690] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.279801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.279926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.280050] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.280861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.281005] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.281119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.281254] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.286472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.287592] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.287773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.287915] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.288044] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.288191] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.288365] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [432.288410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.288575] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [432.290089] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.290251] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.290413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.290534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.292743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.317341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.319747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.319928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.320121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.320618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.320942] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.321274] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.321671] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.323213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.323466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.338519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.338626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.366558] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [432.366568] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [432.366571] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [432.366574] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [432.366577] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [432.366580] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [432.366583] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [432.366587] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [432.367041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [432.367158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [432.367752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [432.367858] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [432.367875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.368012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.375183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.376303] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.376472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.376617] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.376770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.376954] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.377137] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [432.377160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [432.377293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.378709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.378873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.379045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.379170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.380653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.405296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.407771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.408056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.408353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.409037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.409317] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.409573] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.409993] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.411472] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.411744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.429061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.429142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.429267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.429390] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.430251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.430383] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.430494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.430631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.436987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.438148] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.438311] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.438454] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.438595] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.438765] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.438996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.439157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [432.439176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [432.440671] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.440849] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.441017] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.441133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.442601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.467255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.471822] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.472176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.472535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.473251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.473605] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.473978] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.474536] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.476356] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.476650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.492859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.492942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.493061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.493182] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.494039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.494178] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.494289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.494423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.501879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.503036] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.503200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.503327] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.503454] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.503601] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.503798] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [432.503832] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [432.503987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.505550] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.505718] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.505916] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.506033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.508667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.533319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.535772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.536161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.536533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.537278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.537642] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.538004] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.538528] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.540555] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.540912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.558202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.558314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.558435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.558555] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.559463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.559617] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.559757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.559923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.565136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.566259] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.566423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.566563] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.566711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.566896] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.567072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [432.567118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.567273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [432.568711] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.568877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.569036] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.569148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.570615] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.595206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.597774] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.598138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.598509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.599505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.599860] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.600209] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.600649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.602213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.602459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.617492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.617576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.617723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.617884] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.618657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.618802] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.618947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.619093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.626560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.627709] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.627874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.627998] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.628123] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.628273] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.628446] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [432.628493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [432.628628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.630207] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.630371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.630543] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.630667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.632169] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.656722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.659460] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.659830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.660207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.660920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.661283] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.661597] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.662071] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.663609] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.663852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.681046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.681127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.709108] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [432.709118] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [432.709122] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [432.709125] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [432.709129] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [432.709132] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [432.709136] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [432.709139] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [432.709856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [432.709975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [432.710633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [432.710749] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [432.710766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.710907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.717922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.719043] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.719210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.719340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.719466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.719616] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.719804] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [432.719833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [432.719992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.721557] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.721727] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.721891] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.722003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.724697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.749285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.751753] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.751928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.752107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.752560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.752902] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.753256] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.753662] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.755322] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.755580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.771771] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.771853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.771977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.772101] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.772954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.773089] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.773199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.773328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.779688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.780818] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.780987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.781113] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.781254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.781411] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.781603] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [432.781626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [432.781785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.783377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.783524] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.783696] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.783848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.785317] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.809888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.812600] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.812911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.813222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.813945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.814253] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.814532] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.815071] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.816608] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.816928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.835339] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.835428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.835552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.835675] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.836596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.836760] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.836900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.837043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.842260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.843382] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.843548] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.843695] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.843847] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.843995] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.844196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.844347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [432.844392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [432.845705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.845872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.846046] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.846170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.847644] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.872199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.876778] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.877116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.877467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.878129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.878500] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.878877] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.879427] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.881107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.881235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.890420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.890529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.890649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.890801] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.891584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.891732] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.891880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.892026] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.896110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.897231] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.897393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.897519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.897643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.897818] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.898057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.898209] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [432.898253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [432.899691] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.899859] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.900021] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.900148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.901625] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.926193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.928760] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.929100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.929450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.930132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.930449] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.930773] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.931203] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.932643] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.932957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [432.944539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [432.944620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [432.944753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [432.944912] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [432.945717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [432.945873] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [432.945992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [432.946120] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [432.951336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [432.952487] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.952652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [432.952799] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.952955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [432.953106] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [432.953289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [432.953345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [432.953507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [432.954706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [432.954872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [432.955045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [432.955171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [432.956654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [432.981238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [432.983741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [432.984049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [432.984366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [432.985159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [432.985452] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [432.985743] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [432.986210] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [432.987788] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [432.988071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.005411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.005494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.033168] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [433.033177] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [433.033181] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [433.033183] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [433.033187] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [433.033190] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [433.033193] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [433.033196] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [433.033739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [433.033880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [433.034406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [433.034514] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [433.034531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.034672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.042050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.043198] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.043367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.043509] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.043649] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.043823] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.044053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.044204] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [433.044227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [433.045707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.045877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.046038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.046154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.047626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.072183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.074751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.074891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.075040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.075622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.075924] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.076237] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.076604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.077800] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.078059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.094232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.094314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.094434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.094557] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.095406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.095551] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.095674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.095846] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.102204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.103357] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.103533] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.103676] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.103826] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.104014] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.104198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [433.104221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [433.104356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.105705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.105869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.106043] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.106168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.107648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.132199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.134753] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.135054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.135370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.136157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.136454] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.136749] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.137152] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.138709] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.138990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.156322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.156400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.156524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.156647] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.157489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.157648] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.157790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.157959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.164311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.165443] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.165605] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.165759] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.165924] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.166073] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.166252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [433.166275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [433.166412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.167708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.167868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.168044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.168168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.169651] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.194285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.196722] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.197042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.197373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.198306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.198616] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.198933] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.199402] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.200875] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.201150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.217267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.217349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.217472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.217594] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.219570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.219715] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.219842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.219971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.225250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.226395] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.226540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.226688] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.226827] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.226971] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.227169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.227320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [433.227364] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [433.228704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.228871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.229045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.229170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.230652] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.255246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.257738] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.257918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.258103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.258592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.258953] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.259257] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.259705] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.261081] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.261374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.277575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.277657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.277793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.277929] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.278740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.278872] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.278993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.279133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.284349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.285479] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.285621] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.285767] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.285907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.286066] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.286244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [433.286286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.286450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [433.287705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.287870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.288043] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.288169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.289648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.314253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.316776] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.317116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.317469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.318120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.318443] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.318767] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.319182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.320663] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.320957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.336015] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.336095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.363961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [433.363971] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [433.363974] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [433.363977] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [433.363981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [433.363984] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [433.363987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [433.363990] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [433.364521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [433.364628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [433.365225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [433.365336] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [433.365353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.365492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.373806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.374971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.375118] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.375259] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.375395] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.375549] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.375743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [433.375766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [433.375904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.377374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.377534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.377715] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.377844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.379336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.403956] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.406704] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.406869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.407018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.407715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.407980] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.408223] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.408580] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.409564] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.409850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.427051] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.427134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.427256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.427376] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.428302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.428432] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.428558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.428718] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.435057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.436205] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.436347] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.436484] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.436620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.436789] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.436966] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [433.436989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [433.437128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.438709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.438875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.439052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.439166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.440631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.465188] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.467734] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.467903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.468080] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.468654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.469048] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.469375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.469846] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.471305] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.471597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.487825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.487907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.488023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.488144] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.488985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.489117] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.489227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.489359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.494586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.495731] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.495873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.496003] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.496128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.496277] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.496450] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [433.496492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.496652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [433.498158] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.498320] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.498479] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.498592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.500068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.524621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.527392] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.527768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.528136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.528804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.529127] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.529431] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.529876] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.531391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.531703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.547847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.547929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.548047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.548177] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.549013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.549149] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.549272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.549414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.555744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.556888] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.557032] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.557159] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.557285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.557431] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.557601] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [433.557624] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [433.557774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.559338] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.559500] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.559672] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.559807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.561293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.585895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.588730] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.589095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.589470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.590156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.590476] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.590801] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.591217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.592718] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.592974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.610274] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.610354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.610476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.610601] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.611431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.611564] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.611690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.611830] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.617032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.618183] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.618330] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.618456] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.618580] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.618733] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.618912] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [433.618955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.619118] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [433.620617] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.620789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.620959] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.621072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.622539] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.647119] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.649753] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.650118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.650493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.651356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.651729] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.652040] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.652458] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.653968] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.654273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.670479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.670560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.698582] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [433.698592] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [433.698595] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [433.698598] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [433.698602] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [433.698605] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [433.698608] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [433.698611] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [433.699066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [433.699179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [433.699821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [433.699932] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [433.699949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.700091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.708241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.709394] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.709540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.709685] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.709821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.709967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.710141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [433.710164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [433.710298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.711704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.711863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.712034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.712157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.713637] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.738293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.740711] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.740937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.741170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.741707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.742058] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.742333] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.742753] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.744196] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.744457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.760624] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.760734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.760871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.760993] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.762862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.763019] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.763134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.763265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.769655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.770810] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.770967] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.771093] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.771216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.771364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.771571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.771730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [433.771754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [433.773277] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.773440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.773614] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.773749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.775256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.799805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.802623] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.803015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.803389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.804124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.804522] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.804906] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.805390] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.807122] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.807439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.822542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.822624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.822762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.822929] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.823711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.823869] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.823991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.824134] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.830490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.831612] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.831785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.831930] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.832069] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.832228] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.832406] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [433.832429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [433.832562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.834129] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.834291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.834463] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.834586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.836068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.860712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.863464] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.863835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.864203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.864878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.865236] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.865521] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.865994] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.867481] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.867738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.884921] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.885003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.885123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.885242] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.886185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.886329] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.886456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.886602] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.891801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.892945] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.893105] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.893233] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.893360] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.893507] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.893694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [433.893740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.893929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [433.895375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.895542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.895719] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.895867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.897342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.921958] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.924731] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.925107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.925483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.926222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.926551] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.926901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.927378] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.928911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.929149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [433.944163] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [433.944249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [433.944372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [433.944494] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [433.945340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [433.945488] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [433.945613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [433.945787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [433.952155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [433.953295] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.953456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [433.953586] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.953733] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [433.953913] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [433.954135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [433.954287] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [433.954318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [433.955704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [433.955872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [433.956038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [433.956154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [433.957623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [433.982189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [433.984761] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [433.985084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [433.985423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [433.986272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [433.986584] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [433.986900] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [433.987359] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [433.989085] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [433.989368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.006625] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.006746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.034987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [434.034997] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [434.035001] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [434.035004] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [434.035008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [434.035011] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [434.035015] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [434.035019] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [434.035572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [434.035697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [434.036359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [434.036468] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [434.036485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.036622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.044436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.045621] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.045816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.045957] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.046085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.046235] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.046422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [434.046446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [434.046582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.048154] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.048331] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.048490] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.048603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.050095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.074701] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.077441] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.077768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.078096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.078792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.079154] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.079444] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.079911] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.081330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.081611] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.097831] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.097941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.098063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.098185] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.099003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.099157] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.099278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.099425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.104629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.105767] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.105926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.106054] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.106179] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.106331] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.106510] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [434.106554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.106723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [434.108251] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.108431] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.108593] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.108733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.110232] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.134800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.137560] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.137991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.138372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.139265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.139602] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.139941] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.140453] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.142012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.142259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.158399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.158481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.158606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.158750] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.159566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.159708] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.159851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.159995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.166319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.167476] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.167641] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.167789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.167945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.168092] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.168267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [434.168291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [434.168440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.169705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.169868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.170038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.170166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.171648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.195203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.197770] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.198109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.198464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.199184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.199527] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.199840] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.200301] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.201787] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.202085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.220576] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.220656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.220819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.220956] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.221747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.221886] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.222010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.222155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.227352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.228500] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.228641] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.228788] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.228925] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.229081] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.229271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [434.229315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.229467] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [434.230704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.230863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.231035] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.231160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.232633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.257198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.261823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.262179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.262530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.263212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.263569] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.263915] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.264383] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.266088] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.266384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.283646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.283798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.283928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.284051] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.284912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.285055] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.285177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.285327] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.290542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.291683] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.291842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.291969] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.292095] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.292240] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.292412] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [434.292457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.292620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [434.294130] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.294296] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.294469] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.294594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.296076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.320658] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.323412] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.323545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.323704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.324201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.324524] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.324862] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.325347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.326983] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.327230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.343311] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.343423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.371250] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [434.371261] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [434.371264] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [434.371267] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [434.371270] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [434.371273] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [434.371276] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [434.371279] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [434.371995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [434.372133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [434.372871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [434.373013] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [434.373033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.373186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.380099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.381228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.381397] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.381540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.381687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.381874] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.382048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [434.382071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [434.382211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.383709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.383886] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.384047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.384161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.385633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.410172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.412748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.412940] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.413145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.413619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.413908] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.414204] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.414559] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.415835] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.416084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.432165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.432266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.432399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.432532] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.433427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.433570] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.433688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.433854] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.440208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.441342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.441503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.441634] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.441791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.441983] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.442197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.442346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [434.442368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [434.443708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.443864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.444030] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.444141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.445622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.470215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.472742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.472949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.473171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.473739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.474110] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.474401] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.474857] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.476307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.476574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.493827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.493906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.494027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.494150] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.495095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.495246] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.495358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.495490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.500702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.501827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.501992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.502123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.502249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.502401] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.502580] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [434.502627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.502799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [434.504325] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.504478] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.504652] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.504788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.506287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.530937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.533668] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.533955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.534309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.535070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.535404] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.535740] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.536221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.537780] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.538061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.554173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.554257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.554383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.554508] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.555439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.555574] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.555698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.555865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.562180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.563333] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.563495] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.563637] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.563798] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.563975] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.564163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [434.564187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [434.564330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.565706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.565870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.566039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.566163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.567634] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.592191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.594720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.595124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.595495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.596309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.596646] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.596992] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.597487] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.599089] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.599352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.616643] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.616758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.616900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.617022] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.617829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.617966] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.618076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.618205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.623426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.624546] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.624711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.624850] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.624975] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.625124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.625293] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [434.625340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.625500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [434.626707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.626893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.627067] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.627193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.628672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.653350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.655710] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.655949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.656201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.656909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.657253] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.657543] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.657993] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.659478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.659753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.675916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.676000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.704153] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [434.704163] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [434.704166] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [434.704169] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [434.704173] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [434.704176] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [434.704179] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [434.704182] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [434.704729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [434.704866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [434.705492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [434.705600] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [434.705618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.705769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.712667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.713805] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.713971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.714100] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.714226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.714378] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.714573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [434.714596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [434.714759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.716367] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.716522] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.716695] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.716845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.718314] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.742095] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.744741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.744947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.745156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.745670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.745994] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.746324] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.746731] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.748238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.748484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.765770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.765853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.765976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.766100] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.766947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.767099] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.767225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.767373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.773700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.774856] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.775024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.775167] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.775305] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.775462] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.775641] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [434.775665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [434.775813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.777380] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.777542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.777741] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.777887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.779343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.803198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.806769] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.807103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.807435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.808113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.808434] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.808778] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.809296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.810812] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.811097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.828438] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.828523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.828646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.828829] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.829643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.829797] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.829942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.830086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.835310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.836429] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.836594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.836746] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.836914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.837076] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.837276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.837428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [434.837473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [434.838706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.838913] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.839090] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.839219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.840693] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.865294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.867797] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.868194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.868598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.869526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.869940] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.870415] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.870979] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.872773] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.873122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.889250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.889337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.889460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.889598] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.890503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.890689] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.890811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.890957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.897286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.898449] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.898596] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.898758] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.898894] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.899044] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.899235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.899372] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [434.899394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [434.900708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.900901] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.901094] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.901211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.902672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.927240] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.929785] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.930125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.930477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.931138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.931463] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.931781] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.932201] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.934018] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.934361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [434.951767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [434.951857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [434.951993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [434.952128] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [434.952933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [434.953064] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [434.953189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [434.953335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [434.958531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [434.959673] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.959826] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [434.959962] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.960086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [434.960230] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [434.960418] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [434.960464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [434.960630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [434.962135] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [434.962293] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [434.962460] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [434.962586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [434.964075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [434.988634] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [434.991398] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [434.991774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [434.992143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [434.992978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [434.993306] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [434.993606] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [434.994070] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [434.995581] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [434.995834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.010851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.010958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.039001] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [435.039011] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [435.039015] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [435.039018] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [435.039022] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [435.039025] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [435.039028] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [435.039032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [435.039586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [435.039717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [435.040367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [435.040482] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [435.040500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.040641] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.048639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.049764] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.049932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.050063] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.050188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.050339] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.050526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [435.050549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [435.050701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.052290] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.052454] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.052627] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.052764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.054274] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.078859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.081664] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.082006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.082335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.083075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.083396] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.083708] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.084148] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.085651] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.085947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.105466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.105580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.105735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [435.105874] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [435.106714] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [435.106850] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [435.106976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.107122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.112341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.113475] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.113635] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.113804] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.113969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.114169] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.114379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<6> [435.114486] [IGT] i915_pm_rpm: finished subtest basic-rte, FAIL

<7> [435.114544] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [435.115706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.115899] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.116071] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.116198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.117673] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.142154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.144694] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.144832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.144978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.145340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.145487] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.145613] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.145891] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.146603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.146736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.161667] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.161834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.161966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [435.162716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.163879] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.164039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.164180] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.164320] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.164460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [435.164589] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.164721] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.165934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.166097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.166761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [435.173900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.175054] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.175231] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.175371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.175510] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.175672] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.175957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.177549] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.177728] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.177904] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.178030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.179641] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.204272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.206724] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.206989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.207263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.207834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.208089] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.208327] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.208668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.210126] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.210355] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.227629] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.227739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.227867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [435.227993] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [435.228793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [435.228940] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [435.229058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.229190] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.234392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.235535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.235685] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.235825] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.235955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.236100] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.236311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.236464] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [435.236510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [435.237705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.237868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.238042] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.238169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.239646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.264195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.268799] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.269123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.269453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.270083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.270388] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.270675] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.271103] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.272601] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.272928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.288010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.288088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.288211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [435.288332] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [435.289171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [435.289304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [435.289415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.289549] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.295890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.297051] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.297195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.297335] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.297471] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.297628] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.297816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [435.297840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [435.297982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.299541] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.299708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.299878] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.299995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.302671] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.327333] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.329760] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.330012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.330272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.330900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.331229] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.331531] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.332037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.333655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.333966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.350167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.350280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.350399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [435.350522] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [435.351327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [435.351469] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [435.351592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.351770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.356964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.358114] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.358256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.358392] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.358528] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.358688] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.358864] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [435.358907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.360378] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.360529] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.360707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.360829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.362302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.386944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.389712] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.389968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.390317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.391183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.391501] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.391845] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.392235] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.393770] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.394055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.410251] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.410369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.410483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [435.411309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.412475] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.412620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.412771] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.412912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.413042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [435.413158] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.413266] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.414434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.414569] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.416779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [435.420137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.421285] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.421424] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.421557] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.421692] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.421853] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.422095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.423652] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.423824] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.423985] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.424104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.425578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.450240] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.452740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.452915] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.453100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.453554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.453879] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.454152] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.454532] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.455989] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.456262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.473492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.473578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.501472] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [435.501481] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [435.501484] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [435.501487] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [435.501491] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [435.501494] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [435.501497] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [435.501501] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [435.502037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [435.502153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [435.502670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [435.502797] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [435.502814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.502954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.510434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.511579] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.511728] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.511867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.511992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.512142] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.512329] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [435.512351] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [435.512492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.514085] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.514258] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.514415] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.514527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.516743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.541279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.543757] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.544082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.544413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.545215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.545517] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.545811] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.546196] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.547574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.547855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.564050] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.564154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.564277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [435.564403] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [435.565215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [435.565345] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [435.565469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.565613] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.571948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.573097] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.573240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.573379] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.573520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.573686] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.573869] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [435.573918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.575377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.575535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.575709] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.575832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.577302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.601967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.604725] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.605148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.605573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.606232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.606594] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.607075] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.607555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.609112] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.609446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.626711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.626861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.626990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [435.627852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.629027] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.629172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.629320] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.629458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.629596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [435.629737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.629866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.631041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.631229] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.632271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [435.637904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.639030] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.639180] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.639319] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.639460] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.639618] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.639867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.641375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.641523] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.641694] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.641822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.643312] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.668039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.670720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.671034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.671365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.672118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.672428] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.672747] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.673231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.674758] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.675032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.693432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.693519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.693644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [435.693786] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [435.694672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [435.694824] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [435.694974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.695111] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.701441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.702590] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.702780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.702915] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.703042] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.703189] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.703359] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [435.703381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [435.703567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.705174] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.705340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.705508] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.705625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.707105] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.731735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.734492] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.734964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.735343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.736072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.736544] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.736912] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.737393] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.738947] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.739277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.757707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.757798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.757922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [435.758045] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [435.758956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [435.759091] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [435.759204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.759335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.764543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.765695] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.765836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.765962] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.766087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.766235] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.766417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [435.766459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.767705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.767862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.768029] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.768153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.769625] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.794229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.796726] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.797122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.797487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.798196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.798546] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.798880] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.799345] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.800874] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.801165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.817250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.817366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.817477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [435.818394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.819564] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.819732] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.819873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.820001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.820126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [435.820242] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.820353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.821515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.821698] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.823720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [435.827232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.828376] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.828532] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.828676] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.828828] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.828988] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.829213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.830710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.830872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.831034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.831147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.832692] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.857283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.861822] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.862160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.862521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.863381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.863800] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.864198] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.864673] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.866468] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.866820] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.883052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.883135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.883255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [435.883378] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [435.884237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [435.884383] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [435.884503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.884647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.890994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.892142] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.892306] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.892448] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.892585] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.892761] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.892987] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [435.893017] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [435.893140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.894721] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.894884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.895055] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.895177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.897734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [435.922380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [435.926791] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [435.927201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [435.927571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [435.928415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [435.928801] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [435.929153] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [435.929622] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [435.931852] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [435.932215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [435.949617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [435.949725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [435.977454] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [435.977463] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [435.977467] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [435.977469] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [435.977473] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [435.977476] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [435.977479] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [435.977482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [435.978023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [435.978163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [435.978862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [435.978996] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [435.979013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [435.979157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [435.987307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [435.988488] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.988661] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [435.988810] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.988984] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [435.989170] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [435.989378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [435.989536] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [435.989566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [435.991078] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [435.991241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [435.991411] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [435.991537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [435.993034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.017624] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.022821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.023221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.023597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.024380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.024787] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.025240] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.025879] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.027563] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.027932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.046366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.046452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.046575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.046716] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.047611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.047768] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.047916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.048063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.053257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.054405] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.054572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.054722] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.054889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.055049] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.055251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.055405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [436.055449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [436.056708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.056872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.057034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.057150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.059759] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.084465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.088824] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.089198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.089572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.090308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.090669] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.091058] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.091611] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.093492] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.093859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.112393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.112505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.112625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.112777] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.113583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.113722] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.113875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.114025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.119248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.120367] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.120530] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.120673] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.120825] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.121020] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.121206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [436.121250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.121404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [436.122707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.122878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.123052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.123182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.125748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.150389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.152741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.152968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.153202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.153750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.154172] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.154498] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.154993] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.156783] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.157106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.174483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.174586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.174737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.174906] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.175707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.175865] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.175991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.176135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.182462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.183613] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.183786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.183926] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.184069] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.184229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.184406] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [436.184429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [436.184564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.186132] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.186295] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.186467] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.186594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.189379] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.214039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.218816] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.219196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.219571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.220305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.220667] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.221058] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.221613] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.223428] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.223781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.241076] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.241184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.241303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.241428] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.242342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.242491] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.242612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.242768] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.249124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.250278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.250445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.250586] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.250735] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.250918] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.251095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [436.251127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [436.251263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.252707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.252876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.253050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.253175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.255739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.280354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.284792] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.285165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.285534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.286372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.286762] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.287091] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.287567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.289355] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.289717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.305975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.306089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.334090] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [436.334100] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [436.334103] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [436.334106] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [436.334110] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [436.334113] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [436.334116] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [436.334119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [436.334674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [436.334794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [436.335441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [436.335554] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [436.335571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.335721] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.342577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.343733] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.343899] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.344040] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.344177] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.344336] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.344520] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [436.344543] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [436.344692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.346296] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.346457] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.346629] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.346763] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.349601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.374164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.376779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.377148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.377523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.378278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.378633] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.379001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.379536] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.381604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.381918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.399195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.399278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.399402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.399523] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.400453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.400597] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.400729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.400892] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.406089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.407228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.407390] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.407528] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.407665] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.407836] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.408042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [436.408085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.408248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [436.409706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.409888] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.410048] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.410159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.411625] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.436211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.438764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.439084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.439416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.440178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.440487] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.440796] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.441221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.442953] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.443246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.459440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.459524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.459643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.459789] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.460594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.460748] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.460894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.461041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.467390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.468520] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.468689] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.468845] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.468970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.469134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.469309] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [436.469333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [436.469477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.471041] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.471205] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.471378] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.471504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.473748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.498343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.500759] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.501060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.501376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.502087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.502385] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.502661] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.503124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.504578] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.504875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.522203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.522305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.522436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.522572] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.523394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.523550] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.523672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.523829] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.529052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.530189] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.530365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.530507] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.530645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.530816] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.531040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.531200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [436.531246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [436.532691] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.532854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.533025] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.533149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.534628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.559200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.561771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.562150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.562496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.563182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.563492] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.563805] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.564260] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.565847] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.566102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.583411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.583496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.583615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.583768] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.584573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.584722] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.584868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.585014] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.591367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.592486] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.592653] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.592807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.592966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.593112] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.593297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [436.593330] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [436.593468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.594704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.594865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.595039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.595169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.596649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.621242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.623747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.624006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.624279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.625021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.625354] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.625667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.626167] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.627699] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.627962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.645266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.645350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.673207] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [436.673217] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [436.673220] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [436.673223] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [436.673226] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [436.673229] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [436.673232] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [436.673236] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [436.673862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [436.673975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [436.674598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [436.674714] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [436.674731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.674874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.684157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.685308] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.685473] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.685601] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.685745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.685922] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.686107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [436.686130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [436.686270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.687705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.687867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.688040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.688170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.689653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.714267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.716782] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.717146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.717520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.718341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.718652] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.718972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.719425] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.720919] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.721200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.737404] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.737486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.737610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.737770] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.738574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.738722] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.738863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.739011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.745370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.746499] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.746661] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.746808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.746962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.747108] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.747291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [436.747315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [436.747451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.748705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.748865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.749039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.749164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.751756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.776388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.778734] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.779079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.779430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.780229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.780557] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.780901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.781399] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.783102] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.783410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.799640] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.799745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.799869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.799988] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.800820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.800971] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.801093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.801236] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.806450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.807575] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.807741] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.807883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.808008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.808162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.808353] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [436.808395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.808553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [436.810064] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.810227] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.810402] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.810528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.812737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.837382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.839740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.840083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.840433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.841245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.841617] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.841980] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.842476] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.844294] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.844577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.859639] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.859744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.859871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.859990] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.860820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.860968] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.861091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.861241] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.867564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.868716] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.868881] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.869023] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.869162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.869321] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.869494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [436.869518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [436.869654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.871228] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.871394] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.871565] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.871694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.874489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.899076] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.903823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.904227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.904626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.905408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.905816] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.906221] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.906745] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.908543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.908913] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.925159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.925243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [436.925367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [436.925488] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [436.926323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [436.926474] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [436.926586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [436.926744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [436.934239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [436.935384] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.935552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [436.935706] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.935861] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [436.936006] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [436.936183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [436.936215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [436.936361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [436.937706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [436.937873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [436.938047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [436.938176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [436.939658] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [436.964302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [436.966722] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [436.967084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [436.967453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [436.968205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [436.968559] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [436.968922] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [436.969396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [436.971255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [436.971572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [436.988889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [436.988970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.017033] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [437.017043] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [437.017047] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [437.017050] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [437.017054] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [437.017057] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [437.017060] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [437.017064] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [437.017597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [437.017726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [437.018368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [437.018482] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [437.018499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.018639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.025627] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.026774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.026937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.027068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.027195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.027348] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.027526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [437.027549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [437.027677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.029285] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.029448] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.029606] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.029736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.032531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.057015] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.059770] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.060002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.060284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.060914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.061237] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.061509] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.061981] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.063415] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.063669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.079860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.079941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.080063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.080186] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.081040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.081177] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.081293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.081425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.087769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.088905] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.089067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.089196] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.089323] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.089474] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.089651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [437.089674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [437.089822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.091378] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.091542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.091720] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.091867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.094661] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.119278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.123834] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.124212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.124587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.125331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.125710] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.126079] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.126552] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.128375] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.128730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.146052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.146133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.146255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.146376] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.147322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.147462] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.147570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.147734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.154118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.155237] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.155402] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.155542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.155686] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.155869] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.156049] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [437.156073] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [437.156208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.157707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.157870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.158044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.158172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.160754] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.185361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.189786] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.190162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.190544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.191294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.191659] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.192043] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.192573] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.194370] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.194714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.212017] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.212099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.212220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.212345] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.213281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.213416] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.213528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.213658] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.220037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.221144] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.221314] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.221456] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.221594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.221770] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.221989] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [437.222013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [437.222151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.223707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.223866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.224022] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.224137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.226741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.251335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.255825] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.256200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.256577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.257309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.257662] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.258025] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.258561] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.260411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.260769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.278136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.278217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.278335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.278455] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.279315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.279449] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.279560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.279703] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.284925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.286049] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.286213] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.286351] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.286490] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.286650] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.286841] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [437.286895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.287072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [437.288576] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.288760] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.288926] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.289041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.291748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.316325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.318762] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.319086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.319419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.320179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.320490] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.320804] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.321240] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.322849] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.323127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.341504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.341585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.369383] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [437.369393] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [437.369396] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [437.369399] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [437.369403] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [437.369406] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [437.369409] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [437.369412] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [437.370047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [437.370183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [437.370896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [437.371029] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [437.371046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.371186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.378248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.379395] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.379565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.379718] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.379873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.380026] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.380228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.380389] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [437.380409] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [437.381708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.381876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.382045] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.382163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.384739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.409315] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.413812] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.414129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.414449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.415146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.415467] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.415775] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.416243] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.417781] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.418047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.434232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.434315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.434435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.434560] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.435410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.435547] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.435659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.435835] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.442197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.443344] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.443509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.443648] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.443803] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.443994] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.444198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.444348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [437.444371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [437.445706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.445874] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.446050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.446176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.448740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.473331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.477828] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.478208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.478582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.479324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.479706] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.480078] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.480539] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.482327] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.482661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.498829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.498912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.499035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.499159] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.500087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.500237] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.500348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.500478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.507980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.509101] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.509267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.509398] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.509523] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.509670] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.509857] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [437.509890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [437.510062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.511622] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.511793] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.511955] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.512067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.513532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.538142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.540766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.541101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.541452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.542155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.542483] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.542820] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.543260] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.544889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.545189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.562465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.562549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.562671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.562824] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.563729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.563895] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.564023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.564159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.569364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.570515] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.570676] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.570821] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.570980] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.571131] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.571316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [437.571359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.571514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [437.572705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.572873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.573047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.573168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.575747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.600373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.602777] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.603141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.603509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.604265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.604614] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.604971] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.605467] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.607203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.607519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.623697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.623789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.623915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.624040] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.624950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.625106] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.625234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.625380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.631733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.632853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.633019] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.633145] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.633269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.633413] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.633594] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [437.633626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [437.633787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.635400] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.635558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.635739] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.635874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.637344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.661178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.663768] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.664133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.664487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.665274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.665608] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.665954] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.666449] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.668006] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.668272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.685597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.685677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.713447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [437.713458] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [437.713462] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [437.713465] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [437.713469] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [437.713472] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [437.713476] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [437.713480] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [437.713988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [437.714107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [437.714631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [437.714744] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [437.714761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.714901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.723403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.724542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.724715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.724857] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.724995] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.725154] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.725346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [437.725368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [437.725503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.727075] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.727243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.727412] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.727526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.729741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.754332] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.756765] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.757105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.757455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.758173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.758499] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.758812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.759265] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.760725] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.761011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.777114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.777223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.777341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.777462] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.778372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.778525] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.778639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.778798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.785176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.786308] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.786454] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.786607] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.786765] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.786938] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.787107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [437.787129] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [437.787255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.788709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.788883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.789040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.789169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.790640] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.815225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.819775] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.820112] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.820465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.821126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.821447] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.821771] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.822161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.823961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.824334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.842824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.842907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.843031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.843154] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.844075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.844210] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.844324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.844456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.849670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.850817] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.850976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.851101] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.851227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.851371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.851548] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [437.851592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.851762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [437.853264] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.853423] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.853595] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.853724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.855208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.879782] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.882537] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.882702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.882871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.883671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.884050] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.884386] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.884862] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.886579] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.886914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.902007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.902088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.902205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.902328] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.903167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.903300] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.903409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.903538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.909898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.911048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.911216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.911343] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.911469] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.911615] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.911813] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [437.911848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [437.912005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.913567] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.913732] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.913895] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.914010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.915341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [437.939977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [437.942748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [437.942993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [437.943300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [437.944144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [437.944472] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [437.944797] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [437.945283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [437.946767] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [437.947044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [437.963236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [437.963319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [437.963444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [437.963564] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [437.964400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [437.964547] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [437.964659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [437.964833] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [437.970089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [437.971224] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.971383] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [437.971512] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.971641] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [437.971816] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [437.972027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [437.972069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [437.972231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [437.973705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [437.973865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [437.974029] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [437.974143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [437.975610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.000168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.002741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.002976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.003216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.003880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.004246] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.004549] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.005072] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.006704] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.006966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.022009] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.022090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.050218] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [438.050228] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [438.050231] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [438.050234] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [438.050238] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [438.050241] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [438.050244] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [438.050247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [438.050900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [438.051016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [438.051636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [438.051754] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [438.051771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.051916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.058833] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.059971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.060140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.060270] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.060397] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.060546] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.060722] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [438.060755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [438.060903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.062374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.062538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.062707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.062852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.064325] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.088901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.091656] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.091937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.092211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.092760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.093066] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.093301] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.093649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.094945] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.095182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.112391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.112472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.112597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.112740] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.113636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.113794] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.113939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.114078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.120394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.121546] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.121721] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.121856] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.121980] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.122124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.122296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [438.122319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [438.122456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.123705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.123871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.124033] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.124151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.125632] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.150213] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.152772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.153139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.153517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.154349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.154754] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.155129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.155577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.157133] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.157437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.173686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.173797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.173919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.174039] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.174852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.174994] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.175107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.175238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.181562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.182713] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.182878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.183009] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.183136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.183282] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.183492] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [438.183512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [438.183648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.185230] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.185403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.185578] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.185698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.187205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.211779] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.214563] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.214934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.215284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.216216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.216564] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.216923] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.217428] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.219556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.219824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.235998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.236081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.236202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.236321] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.238223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.238367] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.238492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.238631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.243892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.245037] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.245204] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.245334] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.245462] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.245608] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.245796] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [438.245849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.246008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [438.247377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.247545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.247734] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.247881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.249341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.273957] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.276706] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.276924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.277159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.277808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.278197] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.278505] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.279013] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.280611] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.280889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.297067] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.297152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.297272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.297394] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.299297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.299445] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.299570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.299737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.306121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.307248] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.307393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.307530] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.307669] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.307848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.308054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.308206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [438.308238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [438.309720] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.309879] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.310038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.310151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.311616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.336185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.340823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.341230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.341627] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.342360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.342784] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.343160] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.343660] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.345408] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.345752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.361928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.362011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.389965] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [438.389974] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [438.389978] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [438.389981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [438.389984] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [438.389987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [438.389990] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [438.389993] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [438.390522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [438.390629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [438.391264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [438.391373] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [438.391390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.391530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.398608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.399757] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.399901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.400042] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.400181] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.400341] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.400523] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [438.400545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [438.400689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.402250] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.402412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.402585] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.402722] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.404204] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.428829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.431652] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.432023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.432369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.432988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.433295] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.433583] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.434006] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.435436] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.435705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.451879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.451961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.452082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.452203] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.453039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.453173] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.453298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.453443] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.458660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.459808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.459953] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.460091] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.460226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.460384] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.460569] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [438.460610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.460779] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [438.462279] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.462440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.462608] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.462743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.464220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.488814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.493819] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.494197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.494570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.495265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.495618] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.495993] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.496461] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.498261] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.498614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.516007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.516095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.516215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.516339] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.517172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.517306] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.517429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.517571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.522775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.523910] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.524052] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.524193] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.524333] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.524491] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.524673] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [438.524738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.524895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [438.526373] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.526529] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.526703] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.526831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.528313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.552932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.557827] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.558228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.558604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.559505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.559899] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.560253] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.560768] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.562619] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.562994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.579237] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.579345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.579466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.579586] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.581451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.581583] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.581719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.581868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.587126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.588278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.588422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.588560] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.588710] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.588870] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.589042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [438.589099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.589257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [438.590719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.590880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.591052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.591174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.592651] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.617252] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.619774] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.620134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.620511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.621201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.621552] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.621901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.622369] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.624185] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.624500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.641810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.641892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.642016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.642138] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.643058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.643199] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.643320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.643460] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.649799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.650942] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.651086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.651228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.651367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.651529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.651709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [438.651740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [438.651875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.653380] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.653545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.653742] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.653870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.655343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.680062] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.684823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.685225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.685622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.686349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.686764] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.687120] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.687587] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.689338] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.689695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.708152] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.708235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.736258] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [438.736268] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [438.736271] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [438.736274] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [438.736278] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [438.736281] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [438.736284] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [438.736287] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [438.737026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [438.737148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [438.737957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [438.738072] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [438.738089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.738231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.744860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.746001] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.746150] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.746293] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.746430] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.746587] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.746777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [438.746800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [438.746938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.748374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.748536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.748715] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.748839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.750319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.774887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.777649] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.777999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.778333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.779028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.779325] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.779596] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.780049] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.781487] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.781760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.797907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.797991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.798110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.798232] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.799085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.799228] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.799354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.799498] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.805854] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.806976] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.807140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.807278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.807414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.807575] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.807782] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [438.807813] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [438.807984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.809545] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.809739] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.809913] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.810039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.811515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.836162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.838751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.839024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.839318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.840109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.840465] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.840827] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.841355] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.843150] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.843482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.860887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.860973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.861096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.861219] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.862062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.862216] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.862338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.862479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.867689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.868820] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.868992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.869136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.869275] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.869434] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.869614] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [438.869658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.869829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [438.871372] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.871540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.871727] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.871872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.873366] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.897998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.900715] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.901082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.901452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.902438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.902836] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.903180] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.903632] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.905702] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.906033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.923406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.923490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.923611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.923761] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.925645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.925814] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.925939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.926083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.931317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.932459] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.932620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.932766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.932923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.933085] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.933265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [438.933313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.933470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [438.934719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.934887] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.935058] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.935186] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.936669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [438.961245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [438.963749] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [438.964110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [438.964487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [438.965313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [438.965665] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [438.966040] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [438.966536] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [438.968546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [438.968906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [438.985147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [438.985232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [438.985354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [438.985476] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [438.986309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [438.986470] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [438.986594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [438.986768] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [438.993093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [438.994246] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.994391] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [438.994533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.994671] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [438.994851] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [438.995032] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [438.995065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [438.995205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [438.996719] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [438.996880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [438.997049] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [438.997171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [438.998647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.023236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.025780] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.026143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.026515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.027262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.027608] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.027981] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.028515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.030284] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.030602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.049073] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.049157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.077119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [439.077130] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [439.077133] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [439.077136] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [439.077140] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [439.077144] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [439.077147] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [439.077151] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [439.077691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [439.077846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [439.078443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [439.078553] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [439.078570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.078723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.085775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.086920] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.087087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.087228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.087365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.087524] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.087707] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [439.087732] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [439.087871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.089380] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.089544] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.089730] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.089869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.091350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.115998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.118730] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.118984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.119254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.120033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.120379] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.120729] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.121211] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.122830] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.123121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.140382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.140463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.140583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.140720] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.141626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.141775] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.141915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.142060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.148392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.149555] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.149724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.149864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.149999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.150161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.150341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [439.150363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [439.150501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.152068] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.152241] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.152415] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.152544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.154030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.178616] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.181381] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.181765] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.182142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.182831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.183237] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.183597] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.184124] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.185878] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.186196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.203565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.203648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.203808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.203968] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.204763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.204918] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.205041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.205192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.210397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.211538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.211706] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.211845] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.212001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.212162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.212350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [439.212393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.212553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [439.214064] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.214225] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.214393] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.214520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.216023] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.240632] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.243473] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.243816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.244209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.245030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.245403] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.245789] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.246333] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.248316] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.248663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.264979] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.265063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.265190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.265315] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.266162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.266304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.266426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.266576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.272907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.274072] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.274234] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.274376] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.274518] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.274687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.274890] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [439.274914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [439.275054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.276617] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.276808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.276980] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.277105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.278584] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.303234] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.305741] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.305935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.306139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.306620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.307004] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.307399] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.307920] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.309750] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.310077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.328502] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.328584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.328733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.328893] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.329758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.329914] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.330036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.330179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.336516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.337690] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.337851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.337991] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.338131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.338293] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.338478] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [439.338511] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [439.338643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.340220] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.340385] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.340557] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.340692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.342195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.366842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.371783] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.372184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.372579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.373358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.373785] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.374189] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.374668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.376588] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.376974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.394284] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.394390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.422193] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [439.422203] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [439.422207] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [439.422210] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [439.422214] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [439.422217] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [439.422220] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [439.422224] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [439.422939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [439.423095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [439.423931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [439.424062] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [439.424078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.424220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.431046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.432179] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.432344] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.432487] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.432626] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.432799] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.433026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.433177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [439.433201] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [439.434709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.434877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.435052] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.435179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.436667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.461245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.463732] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.463886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.464047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.464487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.464874] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.465277] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.465735] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.467526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.467826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.482892] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.482999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.483121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.483241] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.484072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.484218] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.484343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.484487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.490839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.491961] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.492123] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.492250] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.492377] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.492527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.492721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [439.492744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [439.492907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.494376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.494539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.494719] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.494871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.496341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.520904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.523720] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.523931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.524148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.524771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.525162] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.525457] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.525938] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.527415] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.527696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.543877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.543957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.544076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.544196] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.546109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.546256] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.546370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.546501] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.551801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.552930] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.553090] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.553228] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.553365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.553522] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.553703] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [439.553745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.553928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [439.555375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.555537] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.555708] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.555864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.557340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.581977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.586825] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.587203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.587573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.588309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.588667] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.589017] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.589521] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.591312] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.591595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.607813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.607895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.608014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.608133] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.608991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.609138] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.609263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.609409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.615735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.616884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.617050] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.617180] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.617305] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.617448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.617622] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [439.617646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [439.617799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.619377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.619541] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.619711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.619861] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.621337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.645964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.648729] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.649005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.649308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.650127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.650441] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.650751] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.651168] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.652572] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.652851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.670164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.670247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.670370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.670496] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.671354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.671484] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.671598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.671762] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.678144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.679265] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.679426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.679552] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.679675] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.679845] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.680070] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [439.680102] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [439.680240] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.681705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.681884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.682046] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.682165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.683632] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.708234] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.710748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.710989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.711240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.712022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.712370] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.712674] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.713128] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.714792] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.715080] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.730144] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.730244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.758233] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [439.758243] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [439.758247] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [439.758250] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [439.758254] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [439.758257] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [439.758261] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [439.758265] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [439.758923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [439.759040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [439.759662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [439.759781] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [439.759798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.759935] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.769014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.770175] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.770316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.770453] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.770607] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.770780] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.770960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [439.770984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [439.771126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.772690] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.772847] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.773003] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.773120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.774590] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.799238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.801757] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.802017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.802290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.802915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.803231] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.803513] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.803952] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.805519] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.805775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.822977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.823083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.823211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.823343] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.824245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.824399] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.824523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.824666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.829881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.831030] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.831192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.831330] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.831467] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.831629] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.831830] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [439.831886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.832051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [439.833553] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.833727] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.833894] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.834006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.836668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.861294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.863737] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.863909] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.864088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.864579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.864960] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.865375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.865909] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.867459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.867785] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.885135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.885218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.885338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.885458] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.886322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.886459] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.886568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.886708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.893078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.894243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.894405] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.894534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.894659] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.894836] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.895044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [439.895068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [439.895204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.896710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.896871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.897041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.897167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.898649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.923216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.925708] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.925883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.926066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.926532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.926911] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.927317] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.927786] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.929541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.929869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [439.947136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [439.947216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [439.947338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [439.947459] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [439.948405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [439.948545] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [439.948658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [439.948812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [439.955169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [439.956307] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.956470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [439.956612] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.956766] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [439.956947] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [439.957128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [439.957152] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [439.957288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [439.958709] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [439.958875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [439.959047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [439.959174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [439.960650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [439.985269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [439.987748] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [439.988021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [439.988327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [439.989167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [439.989498] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [439.989831] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [439.990325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [439.991826] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [439.992108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.007175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.007256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.007379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.007505] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.008349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.008493] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.008616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.008792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.015149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.016300] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.016461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.016602] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.016750] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.016928] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.017108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [440.017140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [440.017274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.018707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.018871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.019039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.019152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.020621] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.045181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.047740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.047897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.048066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.048517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.048893] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.049310] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.049747] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.051547] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.051875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.069232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.069316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.097204] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [440.097215] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [440.097218] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [440.097221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [440.097224] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [440.097227] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [440.097230] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [440.097233] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [440.097953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [440.098097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [440.098905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [440.099038] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [440.099055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.099196] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.107029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.108180] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.108347] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.108489] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.108626] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.108809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.109010] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [440.109036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [440.109178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.110705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.110870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.111026] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.111136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.112603] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.137153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.139761] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.140067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.140379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.141034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.141329] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.141602] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.142041] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.143744] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.144010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.162394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.162476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.162599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.162750] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.163642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.163802] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.163953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.164083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.170408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.171575] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.171726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.171859] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.171985] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.172130] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.172315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [440.172338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [440.172473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.173704] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.173864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.174026] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.174146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.175608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.200197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.204816] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.205171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.205521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.206188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.206522] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.206852] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.207257] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.208975] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.209325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.225493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.225575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.225706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.225845] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.226743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.226881] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.227001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.227146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.233481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.234624] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.234777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.234910] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.235035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.235179] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.235370] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [440.235394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [440.235555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.237129] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.237287] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.237454] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.237572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.239047] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.263533] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.267825] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.268202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.268576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.269271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.269617] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.269977] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.270423] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.272193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.272507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.289811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.289891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.290010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.290135] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.291064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.291197] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.291320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.291461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.296658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.297802] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.297951] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.298091] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.298230] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.298387] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.298561] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [440.298604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.298770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [440.300270] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.300435] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.300610] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.300744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.302225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.326800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.329599] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.329989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.330362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.331209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.331562] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.331928] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.332381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.334050] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.334375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.349481] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.349563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.349692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.349825] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.350639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.350782] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.350903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.351039] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.357373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.358519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.358663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.358807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.358947] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.359091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.359292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.359448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [440.359479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [440.360707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.360867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.361037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.361162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.362641] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.387189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.389747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.389969] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.390204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.390802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.391138] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.391444] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.391899] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.393507] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.393779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.412146] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.412226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.440086] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [440.440096] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [440.440099] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [440.440102] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [440.440105] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [440.440108] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [440.440111] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [440.440115] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [440.440647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [440.440778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [440.441301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [440.441414] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [440.441430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.441572] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.450118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.451264] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.451408] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.451549] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.451694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.451851] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.452037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [440.452061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [440.452197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.453705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.453871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.454034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.454147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.455614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.480176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.482773] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.483096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.483433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.484130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.484459] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.484779] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.485264] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.486994] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.487269] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.502276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.502356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.502479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.502600] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.503442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.503595] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.503731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.503904] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.511368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.512517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.512690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.512851] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.512988] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.513144] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.513327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [440.513350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [440.513493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.515068] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.515232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.515388] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.515499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.517739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.542381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.546771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.547133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.547507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.548337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.548719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.549106] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.549595] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.551389] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.551744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.569038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.569122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.569246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.569371] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.570305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.570444] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.570556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.570701] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.577094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.578230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.578377] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.578507] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.578632] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.578793] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.578972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [440.578995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [440.579132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.580707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.580871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.581029] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.581145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.582611] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.607211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.609742] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.609910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.610088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.610549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.610932] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.611262] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.611746] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.613426] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.613730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.630986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.631067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.631187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.631306] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.632238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.632369] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.632481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.632614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.637827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.638985] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.639129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.639266] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.639404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.639566] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.639745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [440.639787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.639943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [440.641377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.641534] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.641707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.641834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.643315] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.667983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.670733] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.671075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.671425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.672083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.672398] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.672711] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.673088] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.674511] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.674795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.690894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.690998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.691115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.691235] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.692144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.692278] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.692391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.692524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.698877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.700023] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.700164] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.700301] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.700435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.700589] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.700777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [440.700808] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [440.700948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.702376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.702536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.702712] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.702834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.704312] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.728882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.731614] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.731994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.732368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.733022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.733352] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.733661] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.734128] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.735638] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.735919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.753113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.753190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.781052] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [440.781062] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [440.781065] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [440.781068] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [440.781071] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [440.781074] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [440.781077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [440.781080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [440.781608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [440.781741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [440.782393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [440.782501] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [440.782518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.782658] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.790991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.792169] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.792319] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.792460] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.792597] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.792766] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.792949] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [440.792973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [440.793112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.794672] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.794853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.795010] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.795123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.796595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.821182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.823759] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.824102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.824455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.825186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.825479] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.825766] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.826127] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.827487] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.827743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.843870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.843949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.844072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.844195] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.845034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.845173] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.845295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.845441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.850635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.851796] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.851941] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.852069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.852193] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.852347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.852534] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [440.852581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.852743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [440.854244] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.854393] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.854559] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.854669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.856170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.880748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.883464] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.883609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.883892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.884515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.884858] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.885178] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.885622] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.887244] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.887500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.904740] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.904827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.904951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.905074] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.905991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.906126] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.906248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.906390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.912705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.913869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.914016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.914157] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.914293] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.914449] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.914630] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [440.914653] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [440.914809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.916374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.916533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.916709] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.916831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.918296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [440.942905] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [440.945712] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [440.945944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [440.946270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [440.947067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [440.947395] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [440.947718] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [440.948111] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [440.949698] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [440.949996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [440.966125] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [440.966205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [440.966325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [440.966447] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [440.967374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [440.967504] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [440.967618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [440.967767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [440.972971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [440.974115] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.974256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [440.974381] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.974507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [440.974655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [440.974843] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [440.974886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [440.975064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [440.976563] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [440.976735] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [440.976910] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [440.977033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [440.979685] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.004242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.008766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.009127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.009502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.010197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.010545] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.010893] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.011354] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.013032] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.013347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.030720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.030815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.030935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.031054] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.031885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.032016] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.032128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.032260] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.038596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.039780] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.039923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.040047] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.040171] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.040313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.040491] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [441.040523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [441.040674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.042249] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.042411] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.042572] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.042700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.044180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.068762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.071576] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.071980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.072334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.073217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.073541] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.073867] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.074269] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.075736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.075991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.093228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.093308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.121267] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [441.121277] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [441.121280] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [441.121283] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [441.121287] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [441.121290] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [441.121293] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [441.121296] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [441.121928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [441.122045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [441.122639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [441.122761] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [441.122778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.122918] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.131211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.132364] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.132507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.132634] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.132782] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.132947] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.133149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.133303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [441.133326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [441.134706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.134864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.135033] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.135149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.136623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.161198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.163714] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.164014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.164328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.165001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.165292] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.165563] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.165977] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.167433] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.167714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.186086] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.186163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.186281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.186412] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.188388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.188532] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.188652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.188804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.194076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.195230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.195374] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.195513] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.195649] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.195820] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.196003] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [441.196051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.196207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [441.197708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.197883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.198047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.198171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.199643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.224201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.226747] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.226953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.227172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.227821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.228149] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.228451] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.228911] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.230570] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.230869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.247068] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.247150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.247271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.247394] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.248233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.248364] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.248478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.248610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.254960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.256119] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.256261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.256390] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.256513] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.256657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.256844] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [441.256873] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [441.257027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.258592] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.258767] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.258934] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.259061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.260526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.285108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.287770] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.288129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.288503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.289177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.289523] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.289869] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.290319] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.292070] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.292390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.308552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.308630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.308762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.308899] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.309799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.309934] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.310056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.310192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.315410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.316556] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.316704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.316837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.316962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.317109] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.317281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [441.317323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.317478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [441.318707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.318866] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.319040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.319166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.320640] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.345227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.347749] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.348000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.348262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.348871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.349178] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.349464] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.349895] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.351365] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.351626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.366694] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.366797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.366919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.367043] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.368915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.369059] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.369183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.369324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.375740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.376868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.377014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.377145] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.377268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.377415] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.377591] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [441.377622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [441.377769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.379327] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.379483] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.379655] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.379791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.381270] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.405890] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.408721] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.409079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.409453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.410139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.410482] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.410834] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.411296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.413006] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.413321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.430685] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.430779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.458856] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [441.458866] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [441.458870] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [441.458873] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [441.458877] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [441.458880] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [441.458884] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [441.458887] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [441.459418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [441.459534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [441.460081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [441.460189] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [441.460206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.460345] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.467421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.468558] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.468705] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.468848] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.468973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.469120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.469306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [441.469329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [441.469468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.471032] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.471188] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.471349] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.471468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.473751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.498390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.500744] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.500921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.501106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.501563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.501866] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.502128] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.502492] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.503821] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.504073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.520141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.520242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.520358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.520488] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.521395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.521533] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.521647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.521820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.527015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.528164] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.528304] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.528440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.528578] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.528744] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.528924] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [441.528970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.529149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [441.530646] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.530816] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.530989] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.531114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.532588] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.557197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.559785] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.560147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.560521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.561375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.561754] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.562079] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.562530] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.564307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.564583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.579628] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.579718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.579846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.579965] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.580794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.580922] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.581040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.581181] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.588640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.589824] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.589970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.590101] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.590226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.590371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.590546] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [441.590569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [441.590727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.592291] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.592452] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.592625] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.592757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.594238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.618889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.621744] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.622108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.622483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.623165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.623512] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.623858] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.624264] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.625771] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.626070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.642277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.642355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.642479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.642602] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.643433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.643584] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.643715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.643860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.649059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.650201] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.650349] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.650489] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.650625] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.650798] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.650978] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [441.651031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.651187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [441.652689] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.652853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.653020] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.653136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.654599] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.679163] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.683828] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.684181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.684535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.685198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.685532] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.685857] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.686281] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.687945] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.688258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.706683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.706799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.706920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.707042] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.707931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.708063] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.708171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.708299] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.714647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.715811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.715954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.716096] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.716221] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.716367] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.716536] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [441.716567] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [441.716721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.718279] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.718438] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.718609] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.718743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.720226] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.744783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.747569] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.747961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.748341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.749191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.749533] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.749886] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.750338] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.752100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.752428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.767552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.767632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.795736] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [441.795746] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [441.795750] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [441.795753] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [441.795757] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [441.795761] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [441.795764] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [441.795768] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [441.796354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [441.796456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [441.797016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [441.797124] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [441.797142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.797282] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.805328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.806477] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.806619] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.806766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.806907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.807056] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.807248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [441.807271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [441.807409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.808705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.808872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.809038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.809154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.810631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.835261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.837770] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.838047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.838336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.839135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.839397] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.839641] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.840022] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.841350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.841612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.857717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.857824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.857943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.858065] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.858968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.859103] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.859214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.859348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.864556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.865714] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.865856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.865992] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.866132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.866296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.866475] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [441.866520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.866712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [441.868143] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.868309] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.868484] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.868610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.870111] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.894627] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.897397] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.897773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.898149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.898820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.899147] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.899452] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.899903] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.901395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.901697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.918942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.919052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.919188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.919319] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.920189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.920320] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.920430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.920560] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.925784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.926944] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.927085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.927224] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.927361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.927522] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.927713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [441.927768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.927927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [441.929377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.929537] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.929717] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.929846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.931321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [441.955888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [441.958620] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [441.958987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [441.959341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.960219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.960528] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [441.960835] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [441.961233] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.962664] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [441.962974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [441.978011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [441.978090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.978212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [441.978331] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [441.979180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [441.979310] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [441.979430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [441.979574] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [441.985911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [441.987057] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.987200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [441.987331] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.987455] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [441.987603] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [441.987788] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [441.987810] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [441.987980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [441.989379] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [441.989540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [441.989707] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [441.989832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [441.991302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.015891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.018687] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.018855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.019029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.019484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.019858] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.020186] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.020633] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.022396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.022716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.038931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.039008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.039128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.039249] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.040097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.040230] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.040350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.040496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.046814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.047976] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.048119] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.048257] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.048392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.048549] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.048726] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [442.048757] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [442.048898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.050378] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.050538] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.050720] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.050845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.052318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.076877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.079702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.080013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.080362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.081170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.081494] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.081820] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.082248] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.083996] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.084296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.100503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.100590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.128268] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [442.128278] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [442.128281] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [442.128284] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [442.128288] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [442.128291] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [442.128294] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [442.128297] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [442.128925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [442.129044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [442.129696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [442.129806] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [442.129822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.129961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.137157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.138295] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.138442] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.138583] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.138731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.138892] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.139068] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [442.139090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [442.139231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.140705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.140865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.141038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.141164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.142642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.167184] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.169762] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.170102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.170454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.171280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.171604] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.171954] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.172398] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.174216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.174496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.191772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.191855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.191977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.192098] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.194070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.194201] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.194320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.194464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.199754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.200902] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.201045] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.201185] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.201325] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.201485] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.201662] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [442.201720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.201876] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [442.203374] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.203539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.203733] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.203866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.205342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.229185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.231754] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.232120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.232493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.233179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.233504] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.233832] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.234290] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.236082] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.236415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.252579] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.252656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.252801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.252939] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.253832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.253964] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.254088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.254234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.261691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.262854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.262996] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.263140] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.263279] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.263438] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.263640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.263823] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [442.263846] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [442.265343] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.265506] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.265689] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.265816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.267298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.291975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.294731] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.294996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.295301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.296038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.296380] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.296745] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.297276] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.299015] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.299347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.316639] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.316745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.316873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.316999] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.317904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.318039] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.318160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.318304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.323519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.324645] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.324798] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.324941] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.325078] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.325238] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.325416] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [442.325462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.325622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [442.327129] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.327277] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.327432] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.327542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.329019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.353607] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.358825] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.359226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.359626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.360368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.360763] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.361107] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.361582] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.363329] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.363696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.382226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.382334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.382456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.382579] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.383381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.383511] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.383634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.383785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.388988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.390136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.390278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.390415] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.390557] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.390726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.390928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.391078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [442.391130] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [442.392563] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.392741] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.392918] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.393045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.395748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.420389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.424816] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.425192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.425568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.426384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.426791] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.427142] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.427595] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.429328] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.429664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.445939] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.446021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.475110] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [442.475119] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [442.475123] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [442.475126] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [442.475129] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [442.475132] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [442.475135] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [442.475139] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [442.475668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [442.475809] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [442.476430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [442.476540] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [442.476557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.476709] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.485912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.487065] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.487210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.487341] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.487465] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.487613] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.487791] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [442.487814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [442.487955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.489387] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.489549] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.489733] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.489859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.491341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.515936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.518729] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.519098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.519474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.520253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.520599] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.520951] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.521407] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.523066] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.523363] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.539589] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.539668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.539801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.539943] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.540751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.540884] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.541005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.541154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.546348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.547510] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.547654] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.547804] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.547940] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.548099] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.548270] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [442.548312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.548471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [442.549705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.549864] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.550019] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.550136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.551604] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.576090] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.580826] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.581206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.581582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.582275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.582621] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.582975] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.583430] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.585344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.585667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.604195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.604304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.604424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.604546] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.605377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.605525] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.605646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.605801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.611026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.612178] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.612343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.612485] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.612624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.612801] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.612996] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [442.613043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.613187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [442.614692] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.614855] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.615027] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.615154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.616636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.641289] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.643746] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.643958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.644175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.644722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.645171] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.645524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.646037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.647964] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.648295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.664543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.664626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.664759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.664913] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.665705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.665864] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.665990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.666135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.672472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.673624] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.673795] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.673946] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.674087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.674246] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.674422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [442.674446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [442.674583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.676155] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.676323] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.676495] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.676621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.678102] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.702717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.705477] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.705854] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.706226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.706933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.707314] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.707667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.708197] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.710034] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.710358] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.727651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.727767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.727912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.728036] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.728901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.729048] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.729173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.729321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.735658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.736796] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.736964] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.737107] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.737246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.737431] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.737619] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [442.737650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [442.737802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.739376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.739539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.739738] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.739893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.741346] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.766019] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.768763] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.769152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.769549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.770346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.770772] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.771129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.771613] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.773429] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.773810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.792251] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.792336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.820177] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [442.820187] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [442.820190] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [442.820193] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [442.820196] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [442.820200] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [442.820202] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [442.820206] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [442.820746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [442.820903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [442.821518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [442.821628] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [442.821645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.821797] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.828958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.830109] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.830275] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.830416] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.830553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.830732] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.830960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.831112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [442.831135] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [442.832632] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.832804] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.832978] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.833103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.834583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.859212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.861757] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.862032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.862342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.863082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.863396] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.863713] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.864139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.865636] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.865921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.883249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.883329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.883453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.883576] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.884421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.884576] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.884711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.884884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.890090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.891230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.891389] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.891527] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.891664] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.891836] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.892050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [442.892092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.892247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [442.893705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.893867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.894039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.894166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.895694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.920226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.922763] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.923125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.923497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.924495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.924878] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.925261] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.925736] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.927386] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.927657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [442.942742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [442.942832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [442.942966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [442.943100] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [442.943919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [442.944066] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [442.944191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [442.944339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [442.950659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [442.951830] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.951993] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [442.952123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.952249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [442.952397] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [442.952577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [442.952600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [442.952759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [442.954353] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [442.954519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [442.954701] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [442.954850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [442.956318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [442.980939] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [442.983754] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [442.984183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [442.984634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [442.985463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [442.985827] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [442.986149] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [442.986557] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [442.987921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [442.988175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.004341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.004423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.004542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.004660] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.005508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.005659] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.005796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.005968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.011179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.012305] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.012464] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.012591] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.012732] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.012910] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.013113] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [443.013167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.013320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [443.014705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.014874] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.015048] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.015175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.016653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.041223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.043744] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.043929] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.044122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.044655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.045024] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.045390] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.045854] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.047342] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.047616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.063838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.063917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.064043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.064172] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.065015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.065158] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.065267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.065397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.071738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.072881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.073041] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.073167] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.073291] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.073434] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.073641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.073806] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [443.073840] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [443.075386] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.075549] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.075719] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.075861] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.077328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.101926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.104670] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.105069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.105441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.106331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.106659] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.106977] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.107447] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.108936] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.109201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.126479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.126562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.154304] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [443.154314] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [443.154318] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [443.154321] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [443.154324] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [443.154328] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [443.154330] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [443.154334] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [443.154966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [443.155108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [443.155690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [443.155824] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [443.155842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.155986] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.164244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.165392] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.165556] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.165708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.165868] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.166021] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.166201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [443.166224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [443.166366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.167705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.167871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.168044] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.168169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.169651] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.194110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.195704] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.195857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.196017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.196426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.196649] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.196923] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.197341] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.198625] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.198877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.214944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.215039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.215176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.215310] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.216208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.216350] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.216472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.216614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.221815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.222977] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.223143] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.223283] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.223421] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.223579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.223778] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [443.223834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.223993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [443.225376] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.225541] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.225723] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.225869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.227343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.251949] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.254674] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.255070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.255448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.256354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.256669] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.256986] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.257411] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.258888] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.259178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.274182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.274266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.274387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.274507] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.275348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.275505] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.275632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.275801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.282185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.283313] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.283479] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.283606] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.283746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.283922] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.284109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [443.284133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [443.284272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.285705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.285867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.286035] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.286159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.287627] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.312203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.314745] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.314946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.315160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.315778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.316171] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.316474] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.316990] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.318630] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.318937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.335145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.335225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.335344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.335465] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.336326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.336464] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.336576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.336736] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.341986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.343110] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.343276] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.343419] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.343555] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.343733] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.343941] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [443.343984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.344137] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [443.345635] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.345827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.345997] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.346118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.347586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.372147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.374743] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.374935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.375132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.375601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.375960] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.376331] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.376750] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.378352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.378626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.395978] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.396063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.396186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.396307] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.397160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.397303] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.397412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.397547] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.403897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.405032] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.405196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.405338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.405474] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.405632] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.405828] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [443.405874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [443.406027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.407583] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.407756] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.407916] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.408031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.410719] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.435332] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.439814] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.440146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.440482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.441191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.441533] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.441911] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.442453] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.444304] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.444572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.461901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.462008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.490161] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [443.490171] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [443.490174] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [443.490177] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [443.490180] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [443.490183] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [443.490186] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [443.490189] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [443.490766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [443.490921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [443.491552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [443.491661] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [443.491689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.491850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.498630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.499762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.499927] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.500059] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.500185] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.500334] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.500537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [443.500559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [443.500692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.502282] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.502447] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.502617] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.502753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.504268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.528845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.531622] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.531951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.532270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.533148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.533443] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.533717] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.534126] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.535463] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.535732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.550724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.550829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.550948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.551069] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.551904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.552044] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.552159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.552291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.558615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.559769] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.559927] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.560056] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.560183] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.560329] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.560511] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [443.560534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [443.560688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.562279] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.562445] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.562621] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.562748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.564246] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.588861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.591740] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.592094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.592450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.593251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.593556] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.593865] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.594283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.595745] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.596029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.613331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.613414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.613537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.613659] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.614499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.614649] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.614786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.614957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.620152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.621298] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.621458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.621586] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.621737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.621919] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.622126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.622276] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [443.622322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [443.623706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.623871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.624038] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.624151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.625618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.650219] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.652781] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.653146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.653522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.654444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.654800] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.655157] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.655604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.657220] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.657485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.673669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.673789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.673926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.674047] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.675896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.676042] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.676164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.676303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.681572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.682710] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.682875] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.683002] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.683131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.683278] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.683470] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [443.683514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.683668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [443.685185] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.685344] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.685514] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.685629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.687132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.711751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.714496] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.714829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.715157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.715778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.716137] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.716425] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.716886] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.718313] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.718598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.734826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.734908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.735030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.735151] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.736007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.736142] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.736252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.736380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.742718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.743868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.744033] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.744162] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.744286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.744433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.744625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [443.744657] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [443.744829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.746377] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.746540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.746711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.746855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.748322] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.772963] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.775665] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.775898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.776124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.776943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.777304] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.777610] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.778094] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.779591] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.779895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.796091] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.796176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.824128] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [443.824138] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [443.824141] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [443.824144] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [443.824147] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [443.824150] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [443.824153] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [443.824157] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [443.824693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [443.824827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [443.825454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [443.825559] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [443.825576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.825723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.834060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.835184] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.835352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.835482] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.835607] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.835766] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.835976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [443.836000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [443.836131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.837706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.837874] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.838046] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.838162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.839631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.864210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.866760] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.867067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.867382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.868047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.868343] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.868600] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.869057] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.870423] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.870693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.889082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.889161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.889278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.889398] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.890341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.890485] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.890597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.890755] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.896003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.897123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.897287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.897413] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.897537] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.897689] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.897875] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [443.897930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.898099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [443.899599] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.899791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.899958] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.900078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.901542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.926136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.928751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.929095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.929449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.930247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.930594] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.930943] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.931448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.933388] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.933718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [443.949897] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [443.950008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [443.950132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [443.950255] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [443.951063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [443.951209] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [443.951323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [443.951456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [443.957818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [443.958938] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.959102] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [443.959232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.959361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [443.959506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [443.959697] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [443.959723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [443.959891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [443.961420] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [443.961583] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [443.961770] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [443.961913] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [443.963343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [443.987846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [443.990709] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [443.991071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [443.991449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [443.992279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [443.992610] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [443.992947] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [443.993434] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [443.994996] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [443.995296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.012504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.012585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.012731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.012885] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.013756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.013914] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.014039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.014171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.019354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.020505] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.020669] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.020816] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.020965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.021115] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.021319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.021474] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [444.021519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [444.022706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.022874] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.023050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.023177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.024654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.049249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.051765] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.052082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.052410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.053353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.053675] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.053994] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.054450] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.056172] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.056461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.071537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.071616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.071759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.071911] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.072705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.072860] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.072980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.073122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.079458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.080609] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.080785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.080928] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.081067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.081227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.081407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [444.081439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [444.081575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.083146] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.083309] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.083483] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.083608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.085098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.109730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.112636] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.113031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.113408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.114224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.114576] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.114933] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.115455] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.116885] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.117153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.134463] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.134573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.162288] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [444.162299] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [444.162302] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [444.162305] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [444.162309] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [444.162313] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [444.162316] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [444.162320] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [444.162955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [444.163073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [444.163706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [444.163816] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [444.163832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.163970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.172169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.173316] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.173482] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.173613] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.173763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.173965] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.174170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.174322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [444.174345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [444.175711] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.175878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.176047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.176161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.177632] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.202259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.204719] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.205008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.205304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.205915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.206229] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.206487] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.206903] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.208206] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.208447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.224527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.224632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.224774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.224929] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.225780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.225940] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.226064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.226210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.232548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.233688] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.233832] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.233971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.234098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.234242] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.234426] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [444.234449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [444.234586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.236154] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.236320] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.236481] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.236595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.238079] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.262669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.267819] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.268174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.268522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.269190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.269514] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.269854] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.270325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.272073] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.272408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.288572] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.288654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.288828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.288965] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.289822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.289955] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.290076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.290217] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.295414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.296562] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.296711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.296843] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.296969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.297114] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.297291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [444.297335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.297491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [444.298708] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.298872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.299043] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.299165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.300633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.325212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.329823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.330176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.330528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.331377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.331719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.332026] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.332467] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.334174] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.334490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.349606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.349692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.349829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.349966] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.350772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.350904] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.351015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.351164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.357488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.358659] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.358813] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.358951] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.359087] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.359246] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.359427] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [444.359450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [444.359587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.361160] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.361317] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.361475] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.361586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.363063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.387541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.391801] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.392177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.392553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.393334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.393701] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.394031] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.394469] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.396231] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.396580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.412761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.412852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.412974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.413096] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.414014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.414153] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.414278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.414426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.420758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.421902] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.422045] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.422177] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.422302] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.422449] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.422644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.422811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [444.422842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [444.424342] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.424504] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.424676] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.424812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.426295] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.450840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.453650] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.454042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.454415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.455085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.455413] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.455739] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.456135] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.457633] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.457927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.476371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.476471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.504166] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [444.504177] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [444.504180] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [444.504183] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [444.504188] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [444.504191] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [444.504194] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [444.504198] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [444.504742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [444.504876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [444.505521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [444.505632] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [444.505657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.505823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.515229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.516411] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.516557] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.516706] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.516843] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.517001] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.517181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [444.517204] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [444.517342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.518706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.518868] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.519028] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.519140] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.520608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.545181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.547702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.548016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.548351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.549045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.549357] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.549656] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.550103] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.551840] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.552139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.568277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.568354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.568476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.568599] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.569520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.569651] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.569783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.569930] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.576262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.577418] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.577559] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.577704] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.577842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.577987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.578182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.578333] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [444.578356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [444.579705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.579870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.580041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.580167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.581650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.606242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.608719] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.609062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.609413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.610072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.610405] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.610736] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.611160] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.612713] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.613009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.630279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.630355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.630474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.630597] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.631523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.631658] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.631793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.631936] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.637129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.638282] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.638426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.638569] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.638714] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.638869] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.639039] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [444.639082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.639236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [444.640705] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.640873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.641048] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.641175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.642649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.667194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.671838] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.672173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.672504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.673155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.673462] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.673765] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.674164] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.675652] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.675977] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.692190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.692273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.692395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.692512] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.693357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.693488] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.693607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.693761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.700091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.701235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.701384] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.701515] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.701638] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.701809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.701992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [444.702015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [444.702154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.703710] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.703895] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.704065] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.704181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.705647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.730213] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.732712] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.733017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.733313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.734028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.734359] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.734666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.735142] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.736604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.736867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.754093] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.754171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.754293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.754413] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.755343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.755475] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.755587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.755750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.760945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.762093] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.762236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.762368] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.762492] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.762636] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.762839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [444.762893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.763098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [444.764597] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.764766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.764932] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.765056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.766534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.791129] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.795835] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.796188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.796539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.797209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.797533] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.797854] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.798248] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.799911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.800222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.816455] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.816536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.845405] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [444.845415] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [444.845418] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [444.845421] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [444.845424] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [444.845427] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [444.845430] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [444.845434] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [444.845963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [444.846078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [444.846881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [444.847010] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [444.847027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.847171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.856524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.857700] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.857845] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.857973] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.858098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.858240] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.858419] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [444.858442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [444.858593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.860170] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.860332] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.860489] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.860602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.862107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.886733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.889651] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.890025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.890372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.891018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.891341] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.891638] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.892047] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.893475] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.893764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.909875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.909960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.910089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.910221] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.911128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.911262] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.911384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.911525] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.916723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.917871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.918013] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.918144] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.918270] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.918414] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.918584] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [444.918632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.918804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [444.920304] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.920468] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.920641] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.920776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.922324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [444.946960] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [444.949676] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [444.949957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [444.950302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [444.951179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [444.951502] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [444.951840] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [444.952267] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [444.953738] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.954018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.969070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [444.969149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [444.969269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [444.969390] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [444.970236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [444.970366] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [444.970476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.970608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [444.976963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [444.978114] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.978256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [444.978387] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.978511] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [444.978657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [444.978832] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [444.978855] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [444.978998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [444.980565] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [444.980745] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [444.980909] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [444.981033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [444.983673] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.008298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.012821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.013198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.013577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.014295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.014675] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.015059] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.015506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.017283] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.017560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.033690] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.033811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.033930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.034050] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.034934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.035071] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.035183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.035313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.041642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.042811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.042952] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.043085] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.043210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.043357] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.043526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [445.043557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [445.043720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.045280] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.045444] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.045615] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.045746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.048517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.073112] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.075711] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.076093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.076485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.077176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.077524] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.077886] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.078352] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.080177] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.080494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.097879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.097961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.098081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.098200] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.099045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.099177] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.099289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.099424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.104639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.105794] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.105936] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.106069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.106192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.106336] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.106509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [445.106552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.106759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [445.108193] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.108352] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.108521] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.108644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.110212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.134781] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.137548] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.137981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.138357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.139216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.139570] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.139908] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.140344] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.141853] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.142143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.157196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.157284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.185355] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [445.185365] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [445.185368] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [445.185371] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [445.185374] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [445.185378] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [445.185381] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [445.185384] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [445.186041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [445.186162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [445.186886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [445.187005] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [445.187022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.187186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.193958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.195120] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.195264] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.195394] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.195522] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.195670] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.195857] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [445.195880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [445.196014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.197572] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.197735] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.197892] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.198008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.200671] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.225370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.227754] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.227953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.228165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.228842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.229131] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.229401] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.229812] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.231297] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.231545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.246567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.246648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.246800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.246937] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.247728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.247857] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.247971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.248118] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.254462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.255623] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.255777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.255917] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.256055] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.256211] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.256391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [445.256413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [445.256560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.258132] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.258298] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.258472] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.258587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.260074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.284647] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.289765] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.290103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.290450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.291103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.291433] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.291778] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.292246] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.294057] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.294383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.310483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.310560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.310693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.310831] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.311729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.311860] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.311983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.312125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.318464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.319611] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.319758] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.319893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.320018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.320161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.320322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [445.320344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [445.320511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.322078] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.322232] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.322395] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.322509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.324021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.348597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.352722] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.353062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.353417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.354158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.354486] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.354808] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.355239] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.356820] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.357121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.374476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.374584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.374729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.374864] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.375650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.375794] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.375916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.376066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.381288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.382412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.382561] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.382708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.382846] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.383004] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.383205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.383355] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [445.383399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [445.384706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.384875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.385033] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.385144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.386610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.411216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.413702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.413876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.414060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.414525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.414883] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.415196] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.415632] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.417301] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.417584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.433714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.433796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.433917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.434043] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.434965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.435096] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.435205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.435335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.441690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.442850] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.442995] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.443137] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.443278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.443441] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.443626] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [445.443658] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [445.443817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.445375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.445536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.445711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.445839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.447307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.471872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.474609] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.474799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.474995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.475573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.475927] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.476237] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.476668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.478357] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.478670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.495978] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.496062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.524012] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [445.524022] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [445.524026] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [445.524029] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [445.524033] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [445.524036] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [445.524040] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [445.524043] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [445.524576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [445.524702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [445.525350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [445.525459] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [445.525477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.525616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.532664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.533802] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.533950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.534079] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.534205] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.534350] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.534548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.534701] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [445.534724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [445.536217] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.536378] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.536553] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.536685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.538240] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.562797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.565521] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.565905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.566248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.566856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.567142] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.567401] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.567793] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.569125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.569378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.585543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.585621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.585760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.585894] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.586710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.586859] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.586974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.587116] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.592303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.593449] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.593592] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.593739] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.593874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.594022] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.594191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [445.594244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.594411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [445.595707] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.595869] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.596039] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.596162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.597660] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.622236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.624786] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.625156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.625534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.626403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.626773] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.627097] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.627553] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.629299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.629555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.644603] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.644689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.644830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.644964] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.645761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.645891] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.646012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.646154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.652505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.653649] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.653801] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.653936] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.654062] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.654206] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.654381] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [445.654404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [445.654542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.656112] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.656272] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.656440] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.656563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.658046] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.682598] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.684700] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.684846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.685008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.685421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.685569] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.685827] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.686255] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.688056] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.688374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.705655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.705765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.705892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.706015] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.706908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.707046] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.707158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.707287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.712500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.713646] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.713800] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.713937] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.714061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.714208] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.714377] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [445.714421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.714575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [445.716081] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.716245] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.716416] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.716541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.718023] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.742599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.745385] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.745756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.746130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.746887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.747230] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.747558] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.748034] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.749727] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.750052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.765142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.765237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.765357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.765475] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.766307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.766441] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.766569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.766723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.773027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.774198] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.774339] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.774468] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.774591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.774752] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.774931] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [445.774963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [445.775108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.776665] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.776834] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.777000] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.777115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.778580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.803157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.805755] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.806097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.806448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.807106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.807434] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.807761] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.808207] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.809660] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.809956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.827201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.827293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.855260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [445.855270] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [445.855274] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [445.855276] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [445.855280] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [445.855283] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [445.855286] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [445.855289] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [445.856025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [445.856144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [445.856866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [445.856972] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [445.856989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.857130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.863891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.865028] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.865174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.865305] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.865433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.865579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.865773] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [445.865796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [445.865938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.867375] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.867535] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.867712] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.867837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.869309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.893839] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.896604] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.896934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.897245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.897925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.898199] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.898465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.898873] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.900207] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.900458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.917757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.917852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.917972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.918091] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.918918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.919053] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.919176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.919321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.924514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.925660] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.925814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.925948] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.926073] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.926221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.926400] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [445.926445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.926594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [445.928091] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.928244] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.928413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.928527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.930742] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [445.955278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [445.959821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [445.960155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [445.960487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [445.961128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [445.961433] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [445.961734] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [445.962166] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [445.963833] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [445.964161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [445.980316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [445.980397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [445.980521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [445.980643] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [445.982614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [445.982784] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [445.982900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [445.983032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [445.988323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [445.989470] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.989616] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [445.989764] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.989903] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [445.990061] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [445.990236] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [445.990284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [445.990437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [445.991706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [445.991867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [445.992040] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [445.992164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [445.993644] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [446.018239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [446.022821] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [446.023175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [446.023527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [446.024190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [446.024515] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [446.024856] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [446.025315] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [446.027025] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [446.027347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [446.043574] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [446.043671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [446.043841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [446.043978] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [446.045840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [446.045978] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [446.046103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [446.046247] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [446.052637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [446.053798] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.053941] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [446.054080] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.054219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [446.054381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [446.054563] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [446.054587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [446.054739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [446.056302] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [446.056463] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.056634] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [446.056766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [446.058242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [446.082854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [446.085727] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [446.086071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [446.086428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [446.087088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [446.087419] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [446.087742] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [446.088165] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [446.089703] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [446.090042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [446.108539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [446.108623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [446.108774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [446.108914] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [446.109703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [446.109841] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [446.109964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [446.110107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [446.116413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [446.117585] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.117731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [446.117872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.117999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [446.118145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [446.118322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [446.118354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [446.118492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [446.120069] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [446.120230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.120399] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [446.120526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [446.122741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [446.147356] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [446.149718] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [446.149947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [446.150188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [446.150748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [446.151098] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [446.151427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [446.151940] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [446.153646] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [446.153950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [446.172329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [446.172413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [446.200238] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [446.200249] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [446.200253] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [446.200256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [446.200260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [446.200263] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [446.200266] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [446.200270] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [446.200903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [446.201022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [446.201696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [446.201857] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [446.201875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [446.202016] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [446.210167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [446.211306] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.211453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [446.211594] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.211746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [446.211912] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [446.212092] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 3

<7> [446.212116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [446.212251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [446.213706] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [446.213863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.214031] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [446.214147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [446.215615] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [446.240233] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [446.242766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [446.243057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [446.243357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [446.244015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [446.244294] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [446.244551] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [446.244943] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [446.246487] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [446.246771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [446.264008] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [446.264105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [446.264228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [446.264350] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [446.265253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [446.265391] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [446.265503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [446.265633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [446.271988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [446.273140] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.273281] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [446.273414] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.273541] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [446.273691] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [446.273870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [446.273893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [446.274030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [446.275589] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [446.275756] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.275920] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [446.276034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [446.278669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [446.303328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [446.307828] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [446.308203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [446.308576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [446.309269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [446.309620] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [446.309988] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [446.310494] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [446.312360] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [446.312643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [446.329907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [446.329986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [446.330108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [446.330229] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [446.331157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [446.331288] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [446.331408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [446.331552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<6> [446.337112] Console: switching to colour frame buffer device 240x67

<7> [446.337875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [446.339041] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.339196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [446.339337] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.339475] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [446.339635] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [446.339843] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [446.339866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [446.340011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [446.341579] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_1 forced on (bios:0 driver:0 kvmr:0 debug:0)

<7> [446.341762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.341936] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [446.342066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [446.344701] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [446.369223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [446.373717] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [446.374042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [446.374371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [446.375023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [446.375327] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [446.375610] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [446.376046] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [446.377566] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [446.377886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [446.395251] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [446.395339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [446.395460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [446.395583] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [446.396403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [446.396539] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [446.396667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [446.396820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [446.397095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [446.397271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [446.397446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [446.397629] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [446.398442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [446.398631] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [446.398828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [446.399025] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [446.399121] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [446.399333] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [446.399525] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [446.399733] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A]

<7> [446.399901] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [446.400088] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [446.400272] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [446.400461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [446.400645] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [446.400849] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [446.401029] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [446.401211] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [446.401392] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [446.401570] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [446.401767] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [446.401949] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [446.402127] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [446.402302] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [446.402483] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [446.402667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [446.402868] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [446.403046] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [446.403226] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [446.403404] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [446.403584] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [446.403784] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [446.403967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [446.404149] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [446.404329] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [446.404505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [446.404694] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [446.404883] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [446.405068] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [446.405249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [446.405427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [446.405610] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [446.405808] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [446.405990] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [446.406170] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [446.406355] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes)

<7> [446.406535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [446.406720] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [446.406724] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [446.406728] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [446.406731] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [446.406735] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [446.406739] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [446.406742] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [446.406746] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [446.406750] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [446.406928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [446.407104] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [446.407283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [446.407468] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039)

<7> [446.407653] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [446.407850] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [446.408029] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [446.408203] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [446.408240] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [446.408259] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [446.408263] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [446.408444] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [446.408627] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [446.408824] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [446.408837] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [446.408841] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [446.409025] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [446.409201] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [446.409377] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [446.409386] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [446.409609] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [446.409796] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [446.409991] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [446.410165] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [446.410342] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [446.410515] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [446.410690] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0

<7> [446.410862] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0

<7> [446.411032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1

<7> [446.411218] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [446.411397] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0

<7> [446.411607] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz)

<7> [446.411809] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz)

<7> [446.412000] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [446.412181] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [446.412363] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [446.412548] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0

<7> [446.412740] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0

<7> [446.412920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset]

<7> [446.413098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [446.413280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [446.413459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [446.413639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [446.413836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [446.414014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [446.414192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [446.414365] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39

<7> [446.414543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [446.414725] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [446.414760] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [446.414779] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [446.414783] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [446.414795] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [446.414799] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [446.414807] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [446.414811] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [446.414815] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [446.414819] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [446.414823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [446.415007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [446.415193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [446.415381] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [446.415561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [446.415757] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [446.415939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500

<7> [446.416123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [446.416301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [446.416478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [446.416658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [446.416863] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [446.417043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [446.417219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [446.417399] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [446.417582] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [446.417809] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [446.417990] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [446.418167] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [446.418343] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [446.418524] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [446.418711] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [446.418887] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [446.419063] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [446.419244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:355] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [446.419426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [446.419601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [446.419797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [446.419981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [446.420161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [446.420338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [446.420519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [446.420703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [446.420861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [446.421258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [446.421444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [446.422183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [446.423375] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.423584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [446.423801] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [446.423994] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [446.424224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [446.424396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [446.424589] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [446.424889] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [446.425063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [446.425243] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [446.425414] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [446.425584] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [446.425773] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [446.425943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [446.426115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [446.426285] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [446.426452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [446.426623] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [446.426803] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [446.426975] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [446.427146] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [446.427314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [446.427485] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [446.427651] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [446.427840] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [446.428001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [446.428174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [446.428343] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [446.428517] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [446.428747] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [446.428934] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [446.429119] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [446.429308] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [446.429495] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [446.429689] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [446.429930] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [446.430082] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [446.430221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [446.430389] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A]

<7> [446.430514] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [446.430723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [446.430949] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [446.431539] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [446.432258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [446.432379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [446.433152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [446.433262] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [446.433274] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [446.433500] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD

<7> [446.441852] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [446.442015] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [446.442147] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [446.442286] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [446.442290] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [446.442292] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [446.442294] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [446.443708] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [446.443841] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [446.450194] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [446.450524] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [446.450710] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [446.451054] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [446.451503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

Results for igt@i915_pm_rpm@basic-rte