<5>[ 0.000000] Linux version 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Jul 9 21:17:08 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca3cfff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca3d000-0x000000006fdb4fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb5000-0x000000006fedbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fedc000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe11000 SMBIOS=0x6cb14000 MEMATTR=0x67f90518 ESRT=0x67fbe798 TPMEventLog=0x67ea6018 <6>[ 0.000000] efi: Remove mem277: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem279: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000383] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000385] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000387] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000388] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000391] esrt: Reserving ESRT space from 0x0000000067fbe798 to 0x0000000067fbe910. <7>[ 0.000396] e820: update [mem 0x67fbe000-0x67fbefff] usable ==> reserved <6>[ 0.000415] Using GB pages for direct mapping <6>[ 0.001162] printk: log_buf_len: 1048576 bytes <6>[ 0.001164] printk: early log buf free: 259064(98%) <6>[ 0.001165] Secure boot disabled <6>[ 0.001167] ACPI: Early table checksum verification disabled <6>[ 0.001170] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001173] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001179] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001182] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001185] ACPI: FACS 0x000000006FDF6000 000040 <6>[ 0.001187] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001189] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001191] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001194] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001196] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001198] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001200] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001202] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001205] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001207] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001209] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001211] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001214] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001216] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001218] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001220] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001222] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001224] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001227] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001229] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001231] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001233] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001235] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001237] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001240] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001242] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001244] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001246] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001248] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001251] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001253] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001255] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001257] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001259] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001261] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001264] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001266] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001268] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001270] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001273] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001275] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001277] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001278] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001278] ACPI: Reserving FACS table memory at [mem 0x6fdf6000-0x6fdf603f] <6>[ 0.001279] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001280] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001280] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001281] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001282] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001282] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001283] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001283] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001284] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001285] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001285] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001286] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001286] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001287] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001288] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001288] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001289] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001290] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001290] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001291] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001291] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001292] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001293] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001293] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001294] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001295] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001295] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001296] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001297] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001297] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001298] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001298] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001299] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001300] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001300] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001301] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001302] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001302] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001303] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001303] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001304] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001315] Setting APIC routing to cluster x2apic. <6>[ 0.045539] Zone ranges: <6>[ 0.045541] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045544] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045545] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045546] Movable zone start for each node <6>[ 0.045547] Early memory node ranges <6>[ 0.045547] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045549] node 0: [mem 0x0000000000100000-0x000000006ca3cfff] <6>[ 0.045550] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045550] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045552] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045555] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045579] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048001] On node 0, zone DMA32: 13762 pages in unavailable ranges <6>[ 0.090130] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.090517] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.090523] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.090568] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.090570] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.090572] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.090575] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.090576] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.090584] e820: update [mem 0x67fa0000-0x67fbafff] usable ==> reserved <6>[ 0.090590] TSC deadline timer available <6>[ 0.090591] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.090601] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.090602] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.090603] PM: hibernation: Registered nosave memory: [mem 0x67fa0000-0x67fbafff] <6>[ 0.090604] PM: hibernation: Registered nosave memory: [mem 0x67fbe000-0x67fbefff] <6>[ 0.090605] PM: hibernation: Registered nosave memory: [mem 0x6ca3d000-0x6fdb4fff] <6>[ 0.090605] PM: hibernation: Registered nosave memory: [mem 0x6fdb5000-0x6fedbfff] <6>[ 0.090606] PM: hibernation: Registered nosave memory: [mem 0x6fedc000-0x6fffefff] <6>[ 0.090607] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.090607] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.090608] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.090609] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.090610] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.090614] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.093722] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.095193] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.095198] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.095200] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.095205] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.095210] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.095222] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.095285] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.095319] random: crng init done <6>[ 0.098122] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.099507] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.099608] Built 1 zonelists, mobility grouping on. Total pages: 8177205 <6>[ 0.099611] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.099612] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.100315] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.100329] software IO TLB: area num 32. <6>[ 0.758433] Memory: 32435112K/33228656K available (16384K kernel code, 2617K rwdata, 5440K rodata, 2564K init, 21168K bss, 793288K reserved, 0K cma-reserved) <4>[ 0.758436] ********************************************************** <4>[ 0.758437] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.758437] ** ** <4>[ 0.758438] ** This system shows unhashed kernel memory addresses ** <4>[ 0.758438] ** via the console, logs, and other interfaces. This ** <4>[ 0.758439] ** might reduce the security of your system. ** <4>[ 0.758439] ** ** <4>[ 0.758440] ** If you see this message and you are not debugging ** <4>[ 0.758440] ** the kernel, report this immediately to your system ** <4>[ 0.758440] ** administrator! ** <4>[ 0.758441] ** ** <4>[ 0.758441] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.758442] ********************************************************** <6>[ 0.758609] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.759063] Dynamic Preempt: full <6>[ 0.759286] Running RCU self tests <6>[ 0.759287] Running RCU synchronous self tests <6>[ 0.759328] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.759329] rcu: RCU lockdep checking is enabled. <6>[ 0.759329] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.759330] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.759331] Trampoline variant of Tasks RCU enabled. <6>[ 0.759332] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.759332] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.759396] Running RCU synchronous self tests <6>[ 0.763222] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.763584] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.763908] Console: colour dummy device 80x25 <6>[ 0.763921] printk: console [tty1] enabled <6>[ 0.765872] printk: console [ttyS0] enabled <4>[ 2.246537] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.254260] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.258349] ... MAX_LOCK_DEPTH: 48 <4>[ 2.262528] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.266879] ... CLASSHASH_SIZE: 4096 <4>[ 2.271227] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.275667] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.280190] ... CHAINHASH_SIZE: 65536 <4>[ 2.284623] memory used by lock dependency info: 9461 kB <4>[ 2.290010] memory used for stack traces: 8320 kB <4>[ 2.294790] per task-struct memory footprint: 1920 bytes <6>[ 2.300186] ACPI: Core revision 20230331 <6>[ 2.305049] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 2.314217] APIC: Switch to symmetric I/O mode setup <6>[ 2.319231] DMAR: Host address width 42 <6>[ 2.323105] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.328478] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.337278] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.342633] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 2.351431] DMAR: SATC flags: 0x1 <6>[ 2.354795] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.361175] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.366601] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.376959] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.387005] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 2.397130] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.407625] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.408684] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.409624] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.410812] process: using mwait in idle threads <6>[ 2.411627] CET detected: Indirect Branch Tracking enabled <6>[ 2.412625] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.413623] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.414627] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.415628] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.416624] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.417628] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.418628] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.419638] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.420627] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.421625] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.422625] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.423627] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.424625] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.425625] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 2.438232] Freeing SMP alternatives memory: 36K <6>[ 2.438626] pid_max: default: 32768 minimum: 301 <6>[ 2.448134] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.448680] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.450162] Running RCU synchronous self tests <6>[ 2.450625] Running RCU synchronous self tests <6>[ 2.451795] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.453052] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.453657] Running RCU-tasks wait API self tests <6>[ 2.564636] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.565745] core: cpu_core PMU driver: <6>[ 2.566624] ... version: 5 <6>[ 2.567624] ... bit width: 48 <6>[ 2.570626] ... generic registers: 8 <6>[ 2.571624] ... value mask: 0000ffffffffffff <6>[ 2.572639] ... max period: 00007fffffffffff <6>[ 2.573626] ... fixed-purpose events: 4 <6>[ 2.574624] ... event mask: 0000000f000000ff <6>[ 2.575683] signal: max sigframe size: 3632 <6>[ 2.576641] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 2.577694] rcu: Hierarchical SRCU implementation. <6>[ 2.578624] rcu: Max phase no-delay instances is 400. <6>[ 2.581558] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.582162] smp: Bringing up secondary CPUs ... <6>[ 2.582907] smpboot: x86: Booting SMP configuration: <6>[ 2.583638] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.625897] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.625897] ... version: 5 <6>[ 1.625897] ... bit width: 48 <6>[ 1.625897] ... generic registers: 8 <6>[ 1.625897] ... value mask: 0000ffffffffffff <6>[ 1.625897] ... max period: 00007fffffffffff <6>[ 1.625897] ... fixed-purpose events: 3 <6>[ 1.625897] ... event mask: 00000007000000ff <4>[ 2.639900] #1 #3 #5 #7 #9 #11 <6>[ 2.644698] smp: Brought up 1 node, 22 CPUs <6>[ 2.646624] smpboot: Max logical packages: 1 <6>[ 2.647623] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.653795] devtmpfs: initialized <6>[ 2.655642] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb5000-0x6fedbfff] (1208320 bytes) <6>[ 2.657029] Running RCU synchronous self tests <6>[ 2.657638] Running RCU synchronous self tests <6>[ 2.658689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.659637] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.660905] pinctrl core: initialized pinctrl subsystem <6>[ 2.662054] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.663763] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.663765] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.664627] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.665680] cpuidle: using governor menu <6>[ 2.667694] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.668859] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 2.669637] PCI: not using MMCONFIG <6>[ 2.670632] PCI: Using configuration type 1 for base access <4>[ 2.672888] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.674696] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.675702] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.676634] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.677629] Callback from call_rcu_tasks() invoked. <6>[ 2.677796] cryptd: max_cpu_qlen set to 1000 <6>[ 2.696618] raid6: avx2x4 gen() 56024 MB/s <6>[ 2.714617] raid6: avx2x2 gen() 56148 MB/s <6>[ 2.732617] raid6: avx2x1 gen() 56195 MB/s <6>[ 2.733623] raid6: using algorithm avx2x1 gen() 56195 MB/s <6>[ 2.751617] raid6: .... xor() 33184 MB/s, rmw enabled <6>[ 2.752624] raid6: using avx2x2 recovery algorithm <6>[ 2.753898] ACPI: Added _OSI(Module Device) <6>[ 2.754624] ACPI: Added _OSI(Processor Device) <6>[ 2.755623] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.756624] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.125566] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 3.136445] ACPI: EC: EC started <6>[ 3.136618] ACPI: EC: interrupt blocked <6>[ 3.141821] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.142625] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.405305] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 4.958265] ACPI: Interpreter enabled <6>[ 4.958735] ACPI: PM: (supports S0 S4 S5) <6>[ 4.959627] ACPI: Using IOAPIC for interrupt routing <6>[ 4.960762] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 4.990526] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 4.990642] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 4.991630] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.016141] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.016616] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.059237] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.175978] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.182564] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.198464] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.205130] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.217709] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.223866] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.230428] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.236208] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.295846] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.296894] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.297890] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 5.584926] ACPI: \_TZ_.FN00: New power resource <6>[ 5.586127] ACPI: \_TZ_.FN01: New power resource <6>[ 5.587122] ACPI: \_TZ_.FN02: New power resource <6>[ 5.588117] ACPI: \_TZ_.FN03: New power resource <6>[ 5.589123] ACPI: \_TZ_.FN04: New power resource <6>[ 5.593207] ACPI: \PIN_: New power resource <6>[ 5.595923] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 5.596636] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 5.600712] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 5.607637] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 5.616528] PCI host bridge to bus 0000:00 <6>[ 5.616627] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 5.617628] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 5.618628] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 5.619629] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 5.620629] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 5.621630] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 5.631021] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 5.632142] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 5.632640] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 5.633637] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 5.634670] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 5.635630] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 5.636673] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 5.638646] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 5.639641] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 5.641675] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 5.642635] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 5.643644] pci 0000:00:05.0: enabling Extended Tags <6>[ 5.645355] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 5.645762] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 5.650491] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 5.650856] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 5.655027] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 5.655844] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 5.660067] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 5.660642] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 5.661997] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 5.662634] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 5.663646] pci 0000:00:0a.0: enabling Extended Tags <6>[ 5.664810] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 5.665636] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 5.666640] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 5.668000] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 5.668643] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 5.669701] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 5.672042] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 5.672642] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 5.673640] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 5.674686] pci 0000:00:0d.3: supports D1 D2 <6>[ 5.675624] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 5.677728] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 5.678639] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 5.679687] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 5.682727] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 5.683641] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 5.684706] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 5.687247] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 5.687643] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 5.688638] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 5.689927] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 5.690672] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.692881] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 5.693673] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.695853] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 5.696675] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.698863] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 5.699679] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.701848] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 5.702648] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 5.703717] pci 0000:00:16.0: PME# supported from D3hot <6>[ 5.706700] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 5.707637] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 5.708631] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 5.709906] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 5.710673] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.712228] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 5.712677] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.714849] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 5.716850] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 5.717670] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 5.718682] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 5.719745] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 5.720982] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 5.721647] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 5.722653] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 5.724649] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 5.725660] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 5.726918] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 5.727652] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 5.728774] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 5.730775] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 5.731685] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 5.733525] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 5.733630] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 5.734755] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 5.735648] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 5.736652] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 5.737763] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 5.738648] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 5.739648] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 5.740660] pci_bus 0000:00: on NUMA node 0 <6>[ 8.591004] Low-power S0 idle used by default for system suspend <6>[ 8.973875] ACPI: EC: interrupt unblocked <6>[ 8.974617] ACPI: EC: event unblocked <6>[ 8.975617] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 8.976625] ACPI: EC: GPE=0x6e <6>[ 8.977625] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 8.978632] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 8.980015] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 8.981057] SCSI subsystem initialized <7>[ 8.981667] libata version 3.00 loaded. <6>[ 8.981755] ACPI: bus type USB registered <6>[ 8.982678] usbcore: registered new interface driver usbfs <6>[ 8.983653] usbcore: registered new interface driver hub <6>[ 8.984675] usbcore: registered new device driver usb <6>[ 8.985843] efivars: Registered efivars operations <6>[ 8.986730] Advanced Linux Sound Architecture Driver Initialized. <6>[ 8.988135] PCI: Using ACPI for IRQ routing <7>[ 9.007076] PCI: pci_cache_line_size set to 64 bytes <6>[ 9.007228] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 9.007781] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 9.007790] e820: reserve RAM buffer [mem 0x67fa0000-0x67ffffff] <7>[ 9.007793] e820: reserve RAM buffer [mem 0x67fbe000-0x67ffffff] <7>[ 9.007796] e820: reserve RAM buffer [mem 0x6ca3d000-0x6fffffff] <7>[ 9.007799] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 9.007891] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 9.008616] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 9.008616] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 9.008628] vgaarb: loaded <6>[ 9.009788] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 9.010628] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 9.013746] clocksource: Switched to clocksource tsc-early <6>[ 9.019762] pnp: PnP ACPI init <6>[ 9.023647] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 9.029568] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 9.036001] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 9.043128] system 00:03: [io 0x06a4] has been reserved <6>[ 9.048443] system 00:03: [io 0x06a0] has been reserved <6>[ 9.072086] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 9.078698] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.085648] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.092598] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 9.099207] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 9.106159] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 9.113115] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 9.120064] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 9.131258] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 9.138247] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 9.148459] pnp: PnP ACPI: found 8 devices <6>[ 9.162571] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 9.171620] NET: Registered PF_INET protocol family <6>[ 9.176774] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.186402] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 9.195407] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 9.203144] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.211448] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 9.221652] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 9.228552] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.236129] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.244150] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 9.249827] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 9.258246] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 9.266685] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 9.272766] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 9.278857] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 9.286530] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 9.294224] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 9.301897] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 9.309581] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 9.317256] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 9.324968] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 9.331771] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 9.336736] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 9.343516] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 9.348761] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 9.354866] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 9.361660] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.369745] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 9.374981] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 9.381085] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 9.387872] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.395970] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 9.402141] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 9.408312] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 9.415177] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 9.422039] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 9.429334] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 9.435587] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 9.441152] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 9.447405] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.454959] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 9.460524] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 9.466782] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.475341] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 9.482584] PCI: CLS 0 bytes, default 64 <6>[ 9.486575] DMAR: No RMRR found <6>[ 9.489731] DMAR: No ATSR found <6>[ 9.492878] DMAR: IOMMU feature nest inconsistent <6>[ 9.492881] DMAR: IOMMU feature sc_support inconsistent <6>[ 9.497587] DMAR: dmar0: Using Queued invalidation <6>[ 9.507613] DMAR: dmar1: Using Queued invalidation <6>[ 9.513340] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 9.518723] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 9.523823] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 9.528921] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 9.534019] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 9.539129] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 9.544240] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 9.549333] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 9.554421] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 9.559519] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 9.564639] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 9.569806] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 9.574997] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 9.580194] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 9.585363] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 9.590593] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 9.595774] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 9.600952] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 9.606127] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 9.611324] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 9.616494] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 9.621699] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 9.626870] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 9.632103] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 9.637276] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 9.642454] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 9.647632] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 9.652809] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 9.657987] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 9.663926] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 9.670357] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 9.676790] software IO TLB: mapped [mem 0x00000000635bd000-0x00000000675bd000] (64MB) <6>[ 9.685029] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 9.692945] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 9.698679] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 9.704326] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 9.709977] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 9.717333] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 9.727356] clocksource: Switched to clocksource tsc <6>[ 9.732391] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 9.750293] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 9.758856] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 9.766544] NET: Registered PF_ALG protocol family <6>[ 9.771352] xor: measuring software checksum speed <6>[ 9.776358] prefetch64-sse : 45107 MB/sec <6>[ 9.780938] generic_sse : 43207 MB/sec <6>[ 9.785295] xor: using function: prefetch64-sse (45107 MB/sec) <6>[ 9.791159] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 9.798541] io scheduler mq-deadline registered <6>[ 9.803070] io scheduler kyber registered <6>[ 9.808470] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 9.815295] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 9.821240] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.836151] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 9.842085] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.856141] efifb: probing for efifb <6>[ 9.859744] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 9.866610] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 9.872777] efifb: scrolling: redraw <6>[ 9.876354] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 9.885948] Console: switching to colour frame buffer device 360x112 <6>[ 9.896330] fb0: EFI VGA frame buffer device <6>[ 9.901273] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 9.906167] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 9.917996] ACPI: button: Lid Switch [LID0] <6>[ 9.922356] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 9.930801] ACPI: button: Sleep Button [SLPB] <6>[ 9.935286] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 9.943970] ACPI: button: Power Button [PWRB] <6>[ 10.010277] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 10.015942] ACPI: thermal: Thermal Zone [TZ00] (36 C) <6>[ 10.021509] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 10.022267] ACPI: battery: Slot [BAT0] (battery present) <6>[ 10.033231] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 10.033566] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 10.042024] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 10.053510] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 10.060612] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 10.069507] Non-volatile memory driver v1.3 <6>[ 10.073819] Linux agpgart interface v0.103 <6>[ 10.110653] ACPI: bus type drm_connector registered <6>[ 10.125396] loop: module loaded <6>[ 10.129112] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 10.129670] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.135822] nvme nvme0: pci function 0000:01:00.0 <6>[ 10.140829] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 10.154071] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 10.163856] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.169094] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 10.175159] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 10.176466] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 10.189374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 10.197643] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.204863] usb usb1: Product: xHCI Host Controller <6>[ 10.209743] usb usb1: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 10.217997] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 10.223153] hub 1-0:1.0: USB hub found <6>[ 10.226972] hub 1-0:1.0: 1 port detected <6>[ 10.227777] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 10.233126] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 10.241856] nvme0n1: p1 p2 <6>[ 10.244339] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.244340] usb usb2: Product: xHCI Host Controller <6>[ 10.244342] usb usb2: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 10.267760] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 10.272759] hub 2-0:1.0: USB hub found <6>[ 10.276672] hub 2-0:1.0: 4 ports detected <6>[ 10.297520] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 10.302768] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 10.311330] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 10.321085] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 10.326318] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 10.333760] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 10.340980] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 10.349304] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.356586] usb usb3: Product: xHCI Host Controller <6>[ 10.361466] usb usb3: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 10.369783] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 10.374809] hub 3-0:1.0: USB hub found <6>[ 10.378659] hub 3-0:1.0: 12 ports detected <6>[ 10.403245] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 10.411740] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.419036] usb usb4: Product: xHCI Host Controller <6>[ 10.423934] usb usb4: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 10.432437] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 10.437407] hub 4-0:1.0: USB hub found <6>[ 10.441679] hub 4-0:1.0: 2 ports detected <6>[ 10.449011] usbcore: registered new interface driver usb-storage <6>[ 10.455465] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 10.462509] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 10.774107] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 10.793668] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 10.802181] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 10.809401] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 10.814151] usb 4-1: Manufacturer: Realtek <6>[ 10.818281] usb 4-1: SerialNumber: 000001 <3>[ 11.174754] i8042: Can't read CTR while initializing i8042 <4>[ 11.180248] i8042: probe of i8042 failed with error -5 <6>[ 11.185520] mousedev: PS/2 mouse device common for all mice <6>[ 11.191483] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 11.197496] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 11.202378] rtc_cmos rtc_cmos: setting system clock to 1998-01-06T10:49:00 UTC (884083740) <6>[ 11.210720] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 11.218634] IR JVC protocol handler initialized <6>[ 11.224045] IR MCE Keyboard/mouse protocol handler initialized <6>[ 11.230778] IR NEC protocol handler initialized <6>[ 11.236190] IR RC5(x/sz) protocol handler initialized <6>[ 11.242125] IR RC6 protocol handler initialized <6>[ 11.247531] IR SANYO protocol handler initialized <6>[ 11.253108] IR Sharp protocol handler initialized <6>[ 11.258710] IR Sony protocol handler initialized <6>[ 11.264203] IR XMP protocol handler initialized <6>[ 11.270759] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 11.279974] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 11.288348] device-mapper: uevent: version 1.0.3 <6>[ 11.293995] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 11.303320] intel_pstate: Intel P-state driver initializing <6>[ 11.313543] intel_pstate: HWP enabled <6>[ 11.318188] sdhci: Secure Digital Host Controller Interface driver <6>[ 11.326536] sdhci: Copyright(c) Pierre Ossman <6>[ 11.341461] pstore: Registered efi_pstore as persistent store backend <6>[ 11.350513] hid: raw HID events driver (C) Jiri Kosina <6>[ 11.359693] usbcore: registered new interface driver usbhid <6>[ 11.367416] usbhid: USB HID core driver <6>[ 11.374716] pci 0000:00:08.0: Setting to D3hot <6>[ 11.393375] pci 0000:00:05.0: Setting to D3hot <6>[ 11.413030] pci 0000:00:0b.0: Setting to D3hot <6>[ 11.433745] pci 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 11.445015] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 11.458840] intel_pmc_core INT33A1:00: initialized <6>[ 11.470191] intel_rapl_msr: PL4 support detected. <6>[ 11.480598] intel_rapl_common: Found RAPL domain package <6>[ 11.490760] intel_rapl_common: Found RAPL domain core <6>[ 11.500797] intel_rapl_common: Found RAPL domain uncore <6>[ 11.510711] intel_rapl_common: Found RAPL domain psys <6>[ 11.530790] Initializing XFRM netlink socket <6>[ 11.540347] NET: Registered PF_INET6 protocol family <6>[ 11.557155] Segment Routing with IPv6 <6>[ 11.565839] In-situ OAM (IOAM) with IPv6 <6>[ 11.574840] mip6: Mobile IPv6 <6>[ 11.582631] NET: Registered PF_PACKET protocol family <6>[ 11.592497] NET: Registered PF_KEY protocol family <6>[ 11.647393] IPI shorthand broadcast: enabled <6>[ 11.656608] AVX2 version of gcm_enc/dec engaged. <6>[ 11.666306] AES CTR mode by8 optimization enabled <6>[ 11.756315] sched_clock: Marking stable (10131013952, 1624897727)->(12983841463, -1227929784) <6>[ 11.771621] registered taskstats version 1 <6>[ 11.883851] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 11.917844] Btrfs loaded, zoned=no, fsverity=no <6>[ 11.927442] pstore: Using crash dump compression: deflate <6>[ 11.954427] clk: Disabling unused clocks <6>[ 11.963515] ALSA device list: <6>[ 11.971373] No soundcards found. <6>[ 11.982160] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 12.646519] EXT4-fs (nvme0n1p2): mounted filesystem aecbb3a8-9ab2-45bd-8603-892d1189995e ro with ordered data mode. Quota mode: disabled. <6>[ 12.664051] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 12.678816] devtmpfs: mounted <6>[ 12.689960] Freeing unused kernel image (initmem) memory: 2564K <6>[ 12.700682] Write protecting the kernel read-only data: 22528k <6>[ 12.713106] Freeing unused kernel image (rodata/data gap) memory: 704K <6>[ 12.724446] Run /sbin/init as init process <7>[ 12.733237] with arguments: <7>[ 12.733250] /sbin/init <7>[ 12.733260] 3 <7>[ 12.733270] with environment: <7>[ 12.733279] HOME=/ <7>[ 12.733288] TERM=linux <7>[ 12.733297] BOOT_IMAGE=/boot/drm_intel <7>[ 13.019189] systemd[1]: System time before build time, advancing clock. <7>[ 13.367978] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 13.400452] systemd[1]: Detected architecture x86-64. <7>[ 13.444257] systemd[1]: Set hostname to . <6>[ 13.663953] cat (189) used greatest stack depth: 12776 bytes left <6>[ 13.728965] netplan (187) used greatest stack depth: 12168 bytes left <7>[ 14.614045] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 14.632144] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 14.657063] systemd[1]: Created slice system-modprobe.slice. <7>[ 14.682034] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 14.706125] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 14.729878] systemd[1]: Created slice User and Session Slice. <7>[ 14.752642] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 14.775564] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 14.792503] systemd[1]: Reached target Remote File Systems. <7>[ 14.812298] systemd[1]: Reached target Slices. <7>[ 14.830890] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 14.858587] systemd[1]: Listening on Syslog Socket. <7>[ 14.877952] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 14.901227] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 14.964114] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 14.978995] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 15.000367] systemd[1]: Listening on Journal Socket. <7>[ 15.020288] systemd[1]: Listening on udev Control Socket. <7>[ 15.040451] systemd[1]: Listening on udev Kernel Socket. <7>[ 15.090312] systemd[1]: Mounting Huge Pages File System... <7>[ 15.141649] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 15.194012] systemd[1]: Mounting Kernel Debug File System... <7>[ 15.250742] systemd[1]: Mounting Kernel Trace File System... <7>[ 15.311500] systemd[1]: Starting Journal Service... <7>[ 15.358069] systemd[1]: Starting Set the console keyboard layout... <7>[ 15.414049] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 15.438512] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 15.453578] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 15.496254] systemd[1]: Starting File System Check on Root Device... <7>[ 15.535465] systemd[1]: Starting Load Kernel Modules... <7>[ 15.583815] systemd[1]: Starting udev Coldplug all Devices... <7>[ 15.609088] systemd[1]: Starting Uncomplicated firewall... <7>[ 15.629633] systemd[1]: Started Journal Service. <6>[ 16.426366] EXT4-fs (nvme0n1p2): re-mounted aecbb3a8-9ab2-45bd-8603-892d1189995e r/w. Quota mode: disabled. <6>[ 16.546238] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 16.643864] systemd-journald[212]: Received client request to flush runtime journal. <5>[ 16.659634] systemd-journald[212]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 18.183630] pps_core: LinuxPPS API ver. 1 registered <6>[ 18.183642] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 18.193958] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 18.207713] PTP clock support registered <6>[ 18.220450] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 18.220720] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 18.286373] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 18.286385] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 18.292456] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 18.501871] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 18.573817] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 18.574210] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 18.574365] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 18.780435] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 18.780484] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 18.808094] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 18.810594] usbcore: registered new device driver r8152-cfgselector <6>[ 18.852959] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 18.853329] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 18.956466] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 18.987236] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 19.030080] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 19.070023] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 19.070750] usbcore: registered new interface driver r8152 <6>[ 19.086255] usbcore: registered new interface driver cdc_ether <6>[ 19.093374] usbcore: registered new interface driver r8153_ecm <6>[ 19.345273] r8152 4-1:1.0 enxe2015072f1a3: renamed from eth0 <6>[ 19.463120] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <4>[ 19.583253] ********************************************************** <4>[ 19.583259] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 19.583264] ** ** <4>[ 19.583269] ** trace_printk() being used. Allocating extra memory. ** <4>[ 19.583274] ** ** <4>[ 19.583279] ** This means that this is a DEBUG kernel and it is ** <4>[ 19.583284] ** unsafe for production use. ** <4>[ 19.583288] ** ** <4>[ 19.583293] ** If you see this message and you are not debugging ** <4>[ 19.583298] ** the kernel, report this immediately to your vendor! ** <4>[ 19.583302] ** ** <4>[ 19.583307] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 19.583312] ********************************************************** <6>[ 19.777225] sudo (387) used greatest stack depth: 12120 bytes left <6>[ 19.796551] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 19.800710] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 19.801640] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 19.802598] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 19.802671] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 19.803477] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 19.804312] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 19.805187] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 19.805768] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 19.806744] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 19.807392] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 19.808772] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 19.809408] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 19.811423] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 19.812076] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 19.812662] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 19.814331] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 19.814975] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 19.815313] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 19.815625] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 19.818843] Console: switching to colour dummy device 80x25 <6>[ 19.827567] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 19.828374] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 19.828418] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 19.829199] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 19.829830] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 19.830473] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 19.832683] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe08018 <7>[ 19.833429] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 19.834043] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 19.834527] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 19.835023] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 19.835480] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 19.836007] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 19.836466] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 19.836869] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 19.837348] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 19.838059] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 19.838701] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 19.839335] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 19.839939] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.840584] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.841243] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 19.841827] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.842291] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.842700] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 19.843161] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.843512] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.843871] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 19.844239] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.844669] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.845130] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 19.845524] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.845892] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.846289] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 19.846636] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.846996] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.848187] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 19.848579] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 19.848953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 19.849313] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 19.849652] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 19.850003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 19.850353] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 19.850696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 19.851032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 19.851379] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 19.851724] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 19.852059] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 19.852372] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 19.852692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 19.853102] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 19.853493] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 19.853929] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 19.854352] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 19.854795] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 19.855348] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 19.855815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 19.856349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 19.856834] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 19.857301] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 19.857750] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 19.858241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 19.858704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 19.859198] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 19.859650] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 19.860084] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 19.860547] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 19.861099] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 19.861580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 19.862081] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 19.862478] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 19.862843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 19.863225] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 19.863551] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 19.863977] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 19.864538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 19.865047] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 19.865684] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 19.866295] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 19.866859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 19.867340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 19.867749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 19.868244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 19.868735] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 19.868799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 19.869364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 19.869802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 19.870273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 19.870871] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 19.874721] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 19.877046] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 19.877600] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 19.878338] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 19.878718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 19.879195] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 19.879801] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 19.880267] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <6>[ 19.889699] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.12) <7>[ 19.955132] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 19.963047] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 19.967453] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 19.968128] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 19.968816] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 19.969926] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 19.970720] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 19.971370] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 19.971947] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 19.972495] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 19.973029] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 19.973537] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 19.974061] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 19.974574] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 19.975088] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 19.975731] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 19.976406] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 19.976895] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 19.977411] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 19.977932] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 19.978416] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 19.979495] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 19.980510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 19.986525] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 19.987284] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 19.991410] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 19.992380] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 19.994610] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 19.996072] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 19.998032] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 20.001080] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 20.001467] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 20.013071] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 20.013115] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 20.013124] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 20.013241] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.014517] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 20.015733] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 20.016273] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 20.016702] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 20.017192] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 20.017700] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 20.018262] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 20.018887] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 20.019618] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 20.020632] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 20.022591] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 20.023545] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.025466] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.026858] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 20.027848] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 20.029160] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.030098] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 20.031555] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <6>[ 20.032029] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <7>[ 20.032420] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 20.033607] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 20.034625] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 20.035268] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 20.036098] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 20.036703] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.037437] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 20.038855] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 20.039767] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.040668] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 20.043662] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 20.045187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 20.046629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 20.047732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 20.048663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 20.049527] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 20.050350] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 20.051283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 20.052248] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 20.053168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 20.054027] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 20.054729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 20.055381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 20.056070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 20.056772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 20.057686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 20.058605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 20.059502] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 20.060434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 20.061377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 20.062315] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 20.063242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 20.064125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 20.065005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 20.065848] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 20.066805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 20.067750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 20.068672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 20.070367] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 20.071379] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 20.072328] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 20.073276] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 20.074166] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 20.075017] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 20.075804] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 20.076680] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 20.077528] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 20.078430] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 20.079376] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 20.080466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 20.081498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 20.082444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.083428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.084391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.085322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.086334] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 20.087138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 20.087821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.088477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.089135] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.089804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.090770] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 20.091771] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 20.092723] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 20.093666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 20.094596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.095468] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.096211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.096894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.097697] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 20.098489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 20.099223] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.099879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.100571] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.101209] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.102218] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 20.102879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 20.103575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 20.104229] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 20.104832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 20.105556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 20.106313] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 20.107313] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 20.107869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 20.108507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 20.109127] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 20.109692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 20.110262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 20.110753] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 20.111529] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 20.112176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 20.112740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 20.113370] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 20.114084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 20.114697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 20.115343] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 20.116264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 20.116958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 20.117579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 20.118312] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 20.119021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 20.119624] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 20.120248] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 20.120893] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 20.121569] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 20.122223] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 20.122791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 20.123470] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 20.124193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 20.124797] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 20.126555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 20.127350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.128165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 20.128953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.129611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.130302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.131067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.131700] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 20.132386] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.133155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.133826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 20.134605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.135379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.136042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.136660] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.137357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.138151] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.138888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.139691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.140462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.141154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.141807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.142533] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 20.143297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 20.144012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.144814] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.145678] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.146511] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.147319] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.148612] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.149654] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.150340] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.150928] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.151512] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.152161] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.152805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 20.153611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 20.154382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 20.155522] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 20.156377] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.157077] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.157698] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.159067] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 20.159605] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 20.184698] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 20.202505] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 20.203140] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 20.203583] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 20.204254] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 20.204268] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 20.204275] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 20.204311] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 20.207332] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 20.207977] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 20.208475] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 20.211874] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 20.212536] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 20.214717] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 20.215313] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 20.220083] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.220788] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 20.221427] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 20.287995] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 20.288657] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 20.289244] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 20.289755] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 20.290273] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 20.290759] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 20.291267] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 20.291740] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 20.292236] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 20.292695] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 20.293180] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 20.293639] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 20.294113] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 20.294578] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 20.296703] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <7>[ 20.309256] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2250MHz, before = 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 20.311654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 20.315078] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 20.315102] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 20.316150] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 20.336885] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 20.336970] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 20.338617] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 20.339241] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 20.340733] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 20.341360] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 20.343014] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 20.343567] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 20.348075] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.348755] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 20.349381] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <6>[ 20.381541] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 20.422676] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 20.423370] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 20.423894] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 20.424418] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 20.424895] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 20.425401] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 20.425872] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 20.426365] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 20.426824] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 20.427313] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 20.427785] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 20.428271] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 20.428733] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 20.429218] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 20.429679] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 20.431883] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <6>[ 20.431953] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.0 <7>[ 20.449798] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 15ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 20.450619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 20.459223] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 20.460800] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 20.460815] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 20.461246] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 20.467554] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.468800] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.469536] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.470262] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 20.470890] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 20.471436] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 20.471934] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 20.472380] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 20.472810] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 20.473371] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 20.473875] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 20.474437] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 20.474982] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 20.475501] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 20.476100] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 20.476637] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 20.477295] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 20.477783] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 20.478268] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.478723] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.479182] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.479615] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.480049] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.480474] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.480897] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.481344] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.481773] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.482231] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.482666] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.483114] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.483543] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.483983] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.484407] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.484829] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.485270] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.485706] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.486163] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.486593] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.487037] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.487457] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.487884] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.488336] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 20.488892] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 20.488941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 20.489517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.490056] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 20.490572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.491096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.491598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.492107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.492595] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 20.493095] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.493576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.494082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 20.494565] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 20.494576] i915 0000:00:02.0: pixelformat: RGB <7>[ 20.494585] i915 0000:00:02.0: colorimetry: sRGB <7>[ 20.494593] i915 0000:00:02.0: bpc: 0 <7>[ 20.494601] i915 0000:00:02.0: dynamic range: VESA range <7>[ 20.494608] i915 0000:00:02.0: content type: Not defined <7>[ 20.494617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.495121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.495612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.496116] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.496608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.497117] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.497614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.498129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.498615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.499158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.499657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.500183] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 20.500727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 20.501264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.501761] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.502279] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.502770] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.503270] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.503750] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.504256] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.504746] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.505255] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.505745] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.506266] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.506806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 20.507372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 20.507876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 20.508385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 20.508864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 20.509372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 20.511832] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 20.711702] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 20.717018] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 20.718295] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 20.728655] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 20.729196] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 20.729605] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 20.780260] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 20.780779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 20.781951] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 20.782427] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 20.782747] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 20.783058] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 20.783341] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 20.783600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 20.783859] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 20.784141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 20.784410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 20.784668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 20.784938] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 20.785200] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 20.785448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 20.785703] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 20.785978] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 20.786242] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 20.786495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 20.786753] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 20.787018] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 20.787272] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 20.787526] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 20.787775] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 20.788044] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 20.788348] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 20.788829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 20.804257] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 20.804724] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 20.805098] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 21.428358] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 21.429197] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.429738] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 21.430300] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 21.632359] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.636395] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 21.637342] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 21.640827] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 21.641898] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 21.644076] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 21.646066] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 21.647325] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 21.650114] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 21.650565] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 21.654179] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 21.654814] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 21.656646] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 21.658205] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 21.659341] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 21.660492] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 21.669086] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.671341] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.672742] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 21.676551] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 21.677711] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 21.678801] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 21.679841] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 21.680891] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 21.681892] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 21.682889] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 21.683885] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 21.684883] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 21.685851] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 21.686893] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 21.687955] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 21.690205] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 21.694232] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 21.695753] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 21.697088] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 21.698289] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 21.699465] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 21.700771] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 21.706112] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 21.707290] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 21.708275] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 21.709210] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 21.710113] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 21.710896] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <6>[ 21.718738] r8152 4-1:1.0 enxe2015072f1a3: carrier on <7>[ 21.753560] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 21.755789] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 21.762597] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 21.764450] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 21.767633] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 21.770486] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 21.772269] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 21.774870] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 21.776292] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 21.777547] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 21.780323] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 21.782264] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 21.785368] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 21.785565] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 21.800431] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 21.906600] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 21.932016] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 21.941584] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 21.942496] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 21.943492] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 21.945869] [drm:drm_client_modeset_probe] <7>[ 21.945751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 21.947019] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 21.946998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 21.947163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.947870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 21.948689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 21.950999] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 21.951673] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 21.951685] i915 device info: graphics version: 12.71 <7>[ 21.951692] i915 device info: media version: 13 <7>[ 21.951698] i915 device info: display version: 14 <7>[ 21.951704] i915 device info: graphics stepping: B0 <7>[ 21.951714] i915 device info: media stepping: C0 <7>[ 21.951723] i915 device info: display stepping: C0 <7>[ 21.951731] i915 device info: base die stepping: ** <7>[ 21.951738] i915 device info: gt: 0 <7>[ 21.951743] i915 device info: memory-regions: 0x41 <7>[ 21.951749] i915 device info: page-sizes: 0x211000 <7>[ 21.951755] i915 device info: platform: METEORLAKE <7>[ 21.951760] i915 device info: ppgtt-size: 48 <7>[ 21.951765] i915 device info: ppgtt-type: 2 <7>[ 21.951770] i915 device info: dma_mask_size: 46 <7>[ 21.951775] i915 device info: is_mobile: no <7>[ 21.951780] i915 device info: is_lp: no <7>[ 21.951785] i915 device info: require_force_probe: yes <7>[ 21.951791] i915 device info: is_dgfx: no <7>[ 21.951796] i915 device info: has_64bit_reloc: yes <7>[ 21.951801] i915 device info: has_64k_pages: no <7>[ 21.951806] i915 device info: gpu_reset_clobbers_display: no <7>[ 21.951811] i915 device info: has_reset_engine: yes <7>[ 21.951816] i915 device info: has_3d_pipeline: yes <7>[ 21.951821] i915 device info: has_4tile: yes <7>[ 21.951826] i915 device info: has_flat_ccs: no <7>[ 21.951831] i915 device info: has_global_mocs: yes <7>[ 21.951836] i915 device info: has_gmd_id: yes <7>[ 21.951841] i915 device info: has_gt_uc: yes <7>[ 21.951846] i915 device info: has_heci_pxp: no <7>[ 21.951851] i915 device info: has_heci_gscfi: no <7>[ 21.951856] i915 device info: has_guc_deprivilege: yes <7>[ 21.951861] i915 device info: has_l3_ccs_read: no <7>[ 21.951866] i915 device info: has_l3_dpf: no <7>[ 21.951870] i915 device info: has_llc: no <7>[ 21.951875] i915 device info: has_logical_ring_contexts: yes <7>[ 21.951880] i915 device info: has_logical_ring_elsq: yes <7>[ 21.951885] i915 device info: has_media_ratio_mode: no <7>[ 21.951890] i915 device info: has_mslice_steering: no <7>[ 21.951895] i915 device info: has_oa_bpc_reporting: yes <7>[ 21.951920] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 21.951926] i915 device info: has_oam: yes <7>[ 21.951933] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 21.951937] i915 device info: has_pxp: yes <7>[ 21.951942] i915 device info: has_rc6: yes <7>[ 21.951946] i915 device info: has_rc6p: no <7>[ 21.951950] i915 device info: has_rps: yes <7>[ 21.951954] i915 device info: has_runtime_pm: yes <7>[ 21.951958] i915 device info: has_snoop: yes <7>[ 21.951962] i915 device info: has_coherent_ggtt: no <7>[ 21.951967] i915 device info: tuning_thread_rr_after_dep: no <7>[ 21.951971] i915 device info: unfenced_needs_alignment: no <7>[ 21.951975] i915 device info: hws_needs_physical: no <7>[ 21.951979] i915 device info: has_pooled_eu: no <7>[ 21.951983] i915 device info: cursor_needs_physical: no <7>[ 21.951987] i915 device info: has_cdclk_crawl: yes <7>[ 21.951991] i915 device info: has_cdclk_squash: yes <7>[ 21.951995] i915 device info: has_ddi: yes <7>[ 21.951999] i915 device info: has_dp_mst: yes <7>[ 21.952003] i915 device info: has_dsb: yes <7>[ 21.952007] i915 device info: has_fpga_dbg: yes <7>[ 21.952011] i915 device info: has_gmch: no <7>[ 21.952015] i915 device info: has_hotplug: yes <7>[ 21.952020] i915 device info: has_hti: no <7>[ 21.951752] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.952025] i915 device info: has_ipc: yes <7>[ 21.952028] i915 device info: has_overlay: no <7>[ 21.952031] i915 device info: has_psr: yes <7>[ 21.952034] i915 device info: has_psr_hw_tracking: no <7>[ 21.952038] i915 device info: overlay_needs_physical: no <7>[ 21.952041] i915 device info: supports_tv: no <7>[ 21.952044] i915 device info: has_hdcp: yes <7>[ 21.952047] i915 device info: has_dmc: yes <7>[ 21.952050] i915 device info: has_dsc: yes <7>[ 21.952053] i915 device info: rawclk rate: 38400 kHz <7>[ 21.952057] i915 device info: iommu: enabled <7>[ 21.952061] i915 device info: available engines: 400003 <7>[ 21.952065] i915 device info: subslice total: 8 <7>[ 21.952068] i915 device info: geometry dss mask=00000000,000000ff <7>[ 21.952073] i915 device info: compute dss mask=00000000,000000ff <7>[ 21.952076] i915 device info: EU total: 128 <7>[ 21.952079] i915 device info: EU per subslice: 16 <7>[ 21.952082] i915 device info: has slice power gating: no <7>[ 21.952085] i915 device info: has subslice power gating: no <7>[ 21.952088] i915 device info: has EU power gating: no <7>[ 21.952091] i915 device info: available engines: 41400 <7>[ 21.952094] i915 device info: subslice total: 8 <7>[ 21.952097] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 21.952101] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 21.952104] i915 device info: EU total: 128 <7>[ 21.952107] i915 device info: EU per subslice: 16 <7>[ 21.952109] i915 device info: has slice power gating: no <7>[ 21.952112] i915 device info: has subslice power gating: no <7>[ 21.952115] i915 device info: has EU power gating: no <6>[ 21.952118] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 21.952121] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 21.952124] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 21.952301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 21.953516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 21.954039] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 21.954519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 21.954932] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 21.955507] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 21.955528] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 21.955541] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 21.955629] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 21.956162] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 21.958128] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.958694] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 21.960102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 21.961130] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 21.961191] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.961212] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 21.961252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 21.962413] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 21.962498] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 21.962558] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 21.962618] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 21.963584] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 21.963677] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 21.963753] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 21.963832] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 21.965354] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 21.965477] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 21.965572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 21.965670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 21.967174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 21.967295] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 21.967386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 21.967480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 21.968880] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 21.969043] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 21.969138] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 21.969231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 21.970574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 21.970698] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 21.970789] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 21.970826] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 21.970854] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 21.970880] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 21.970945] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 21.970973] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 21.970999] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 21.971508] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 21.971615] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 21.971645] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 21.971673] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 21.971699] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 21.971776] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 21.972220] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 21.972522] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 21.991102] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 21.994937] fbcon: i915drmfb (fb0) is primary device <7>[ 21.999931] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 22.001160] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 22.002205] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 22.003138] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 22.003973] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 22.004860] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 22.005937] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 22.007038] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 22.007834] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 22.008724] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 22.009664] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 22.010461] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 22.011346] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 22.012329] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 22.013352] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.014230] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.015202] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 22.016238] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 22.017461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 22.018483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 22.019386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 22.020369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 22.021229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 22.022057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 22.022712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 22.023555] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 22.024383] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 22.025223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 22.026021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 22.026833] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 22.026845] i915 0000:00:02.0: pixelformat: RGB <7>[ 22.026854] i915 0000:00:02.0: colorimetry: sRGB <7>[ 22.026862] i915 0000:00:02.0: bpc: 0 <7>[ 22.026871] i915 0000:00:02.0: dynamic range: VESA range <7>[ 22.026880] i915 0000:00:02.0: content type: Not defined <7>[ 22.026889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 22.027881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.028859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.029708] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.030646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 22.031463] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.032374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 22.033277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 22.034219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 22.035000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 22.035716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 22.036621] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 22.037711] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 22.038833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 22.039932] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.040835] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.042055] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.043180] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.044113] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.045019] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.046014] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.046872] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.047836] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.048785] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.049729] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 22.050961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 22.051889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 22.052990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 22.053995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 22.054824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 22.055895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 22.056850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 22.060534] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 22.062576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 22.063742] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 22.065053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 22.066277] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 22.067422] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 22.068406] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 22.069588] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 22.070787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 22.071975] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 22.073052] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 22.074129] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 22.075232] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 22.076303] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 22.077237] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 22.078360] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 22.079459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 22.080531] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 22.081640] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 22.082782] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 22.083979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 22.085026] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 22.086096] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 22.091169] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 22.096749] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.097284] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 22.099575] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 22.100849] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 22.102141] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 22.103208] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 22.104280] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 22.105355] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 22.106421] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 22.107471] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 22.108529] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 22.109624] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 22.110665] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 22.116445] Console: switching to colour frame buffer device 360x112 <6>[ 22.151483] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 22.163449] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 22.163636] [drm:drm_client_modeset_probe] <7>[ 22.164629] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.164814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.168072] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.168519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.172234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 22.173260] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.173278] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 22.173719] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.174170] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.174537] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.175160] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.175175] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.175181] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.175238] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.175536] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.176887] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.177528] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.179198] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.179263] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.179279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.179326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.180405] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.180450] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.180497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.180875] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.180959] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.181009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.181682] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.181738] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.181791] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.182590] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.182635] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.182676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.183297] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.183330] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.183362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.183766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.183796] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.183807] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.183814] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.183820] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.183827] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.183833] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.183839] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.184061] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.184109] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.184119] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.184127] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.184135] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 22.184206] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.203132] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 22.203375] [drm:drm_client_modeset_probe] <7>[ 22.203676] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.203788] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.206117] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.206502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.207856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.208382] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.208739] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.209109] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.209472] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.209482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.209489] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.209525] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.209891] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.211554] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.211993] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.213532] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.213584] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.213602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.213650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.214180] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.214217] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.214250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.214660] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.214692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.214721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.215185] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.215217] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.215246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.215742] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.215790] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.215835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.216515] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.216567] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.216616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.217390] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.217451] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.217469] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.217483] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.217496] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.217509] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.217521] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.217534] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.217666] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.217710] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.217725] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.217739] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.217752] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 22.217824] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.281889] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.282951] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.283782] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.284602] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.285560] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.286382] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.287170] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.287952] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.288699] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.289511] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.290189] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.290831] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.291549] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.292328] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.293699] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.294826] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.295701] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.296542] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.297477] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.298420] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.299312] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.300111] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.300839] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.301714] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.302618] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.303805] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.304796] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.305705] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.306491] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.307274] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.308032] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.308860] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.309811] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.310648] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.311572] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.312468] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 22.334613] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 22.338425] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 22.339845] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 22.340956] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 22.358844] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 22.360825] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 25.270309] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 25.271576] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 26.074091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 26.075756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 26.077079] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 26.078279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 26.595455] systemd-udevd (307) used greatest stack depth: 11128 bytes left <7>[ 27.972062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 27.975072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 27.986578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 27.988036] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 27.989274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 33.874143] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=680 'systemd' <5>[ 34.331494] systemd-journald[212]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 34.412279] systemd-journald[212]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 35.275637] fuse: init (API version 7.38)