<5>[ 0.000000] Linux version 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Jul 9 21:17:08 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca3dfff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca3e000-0x000000006fdb5fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb6000-0x000000006fedcfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fedd000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe12000 SMBIOS=0x6cb15000 MEMATTR=0x67fa4698 ESRT=0x67faca98 TPMEventLog=0x67f6a018 <6>[ 0.000000] efi: Remove mem285: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem287: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000014] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000017] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000020] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000396] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000399] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000401] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000402] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000405] esrt: Reserving ESRT space from 0x0000000067faca98 to 0x0000000067facc10. <7>[ 0.000410] e820: update [mem 0x67fac000-0x67facfff] usable ==> reserved <6>[ 0.000430] Using GB pages for direct mapping <6>[ 0.001177] printk: log_buf_len: 1048576 bytes <6>[ 0.001179] printk: early log buf free: 259112(98%) <6>[ 0.001180] Secure boot disabled <6>[ 0.001182] ACPI: Early table checksum verification disabled <6>[ 0.001185] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001188] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001193] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001197] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001200] ACPI: FACS 0x000000006FDF7000 000040 <6>[ 0.001202] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001205] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001207] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001209] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001212] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001214] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001216] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001218] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001221] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001223] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001225] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001227] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001230] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001232] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001234] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001236] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001239] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001241] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001243] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001245] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001247] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001250] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001252] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001254] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001257] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001259] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001261] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001263] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001265] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001268] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001270] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001272] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001274] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001277] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001279] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001281] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001283] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001285] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001288] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001290] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001292] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001294] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001295] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001296] ACPI: Reserving FACS table memory at [mem 0x6fdf7000-0x6fdf703f] <6>[ 0.001296] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001297] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001298] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001298] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001299] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001300] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001300] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001301] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001302] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001302] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001303] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001303] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001304] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001305] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001305] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001306] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001307] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001307] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001308] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001309] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001309] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001310] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001311] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001311] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001312] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001313] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001313] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001314] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001314] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001315] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001316] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001316] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001317] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001318] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001318] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001319] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001320] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001320] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001321] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001321] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001322] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001334] Setting APIC routing to cluster x2apic. <6>[ 0.045855] Zone ranges: <6>[ 0.045857] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045859] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045861] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045862] Movable zone start for each node <6>[ 0.045862] Early memory node ranges <6>[ 0.045863] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045864] node 0: [mem 0x0000000000100000-0x000000006ca3dfff] <6>[ 0.045865] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045866] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045868] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045871] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045896] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048353] On node 0, zone DMA32: 13761 pages in unavailable ranges <6>[ 0.090822] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.091606] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.091612] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.091659] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.091661] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.091663] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.091665] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.091666] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.091675] e820: update [mem 0x67f4b000-0x67f65fff] usable ==> reserved <6>[ 0.091682] TSC deadline timer available <6>[ 0.091683] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.091692] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.091694] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.091695] PM: hibernation: Registered nosave memory: [mem 0x67f4b000-0x67f65fff] <6>[ 0.091696] PM: hibernation: Registered nosave memory: [mem 0x67fac000-0x67facfff] <6>[ 0.091697] PM: hibernation: Registered nosave memory: [mem 0x6ca3e000-0x6fdb5fff] <6>[ 0.091698] PM: hibernation: Registered nosave memory: [mem 0x6fdb6000-0x6fedcfff] <6>[ 0.091698] PM: hibernation: Registered nosave memory: [mem 0x6fedd000-0x6fffefff] <6>[ 0.091699] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.091700] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.091700] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.091701] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.091703] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.091708] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.094963] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.096443] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.096448] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.096449] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.096455] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.096461] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.096474] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.096532] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.096564] random: crng init done <6>[ 0.099379] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.100783] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.100888] Built 1 zonelists, mobility grouping on. Total pages: 8177206 <6>[ 0.100891] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.100892] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.101617] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.101632] software IO TLB: area num 32. <6>[ 0.794673] Memory: 32435344K/33228660K available (16384K kernel code, 2617K rwdata, 5440K rodata, 2564K init, 21168K bss, 793060K reserved, 0K cma-reserved) <4>[ 0.794676] ********************************************************** <4>[ 0.794677] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.794677] ** ** <4>[ 0.794678] ** This system shows unhashed kernel memory addresses ** <4>[ 0.794679] ** via the console, logs, and other interfaces. This ** <4>[ 0.794679] ** might reduce the security of your system. ** <4>[ 0.794680] ** ** <4>[ 0.794680] ** If you see this message and you are not debugging ** <4>[ 0.794680] ** the kernel, report this immediately to your system ** <4>[ 0.794681] ** administrator! ** <4>[ 0.794681] ** ** <4>[ 0.794682] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.794682] ********************************************************** <6>[ 0.794856] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.795335] Dynamic Preempt: full <6>[ 0.795574] Running RCU self tests <6>[ 0.795575] Running RCU synchronous self tests <6>[ 0.795619] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.795620] rcu: RCU lockdep checking is enabled. <6>[ 0.795621] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.795621] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.795622] Trampoline variant of Tasks RCU enabled. <6>[ 0.795623] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.795624] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.795692] Running RCU synchronous self tests <6>[ 0.799806] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.800176] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.800514] Console: colour dummy device 80x25 <6>[ 0.800528] printk: console [tty0] enabled <4>[ 0.802595] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.802609] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.802616] ... MAX_LOCK_DEPTH: 48 <4>[ 0.802622] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 0.802629] ... CLASSHASH_SIZE: 4096 <4>[ 0.802635] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.802642] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 0.802649] ... CHAINHASH_SIZE: 65536 <4>[ 0.802656] memory used by lock dependency info: 9461 kB <4>[ 0.802664] memory used for stack traces: 8320 kB <4>[ 0.802671] per task-struct memory footprint: 1920 bytes <6>[ 0.802690] ACPI: Core revision 20230331 <6>[ 0.803682] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 0.803860] APIC: Switch to symmetric I/O mode setup <6>[ 0.803870] DMAR: Host address width 42 <6>[ 0.803876] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.803910] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.803925] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.803945] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 0.803958] DMAR: SATC flags: 0x1 <6>[ 0.803969] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.803978] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.803987] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.805758] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.810437] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 0.814769] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.814794] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.814860] x86/tme: not enabled by BIOS <6>[ 0.814871] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.814879] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.815076] process: using mwait in idle threads <6>[ 0.815087] CET detected: Indirect Branch Tracking enabled <6>[ 0.815096] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.815104] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.815115] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.815128] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.815136] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 0.815148] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.815159] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.815181] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.815192] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.815201] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.815210] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.815221] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.815230] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.815239] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 0.826845] Freeing SMP alternatives memory: 36K <6>[ 0.826859] pid_max: default: 32768 minimum: 301 <6>[ 0.834869] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.834934] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.835517] Running RCU synchronous self tests <6>[ 0.835526] Running RCU synchronous self tests <6>[ 0.835707] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.835786] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 0.835786] Running RCU-tasks wait API self tests <6>[ 0.942811] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.943090] core: cpu_core PMU driver: <6>[ 0.943104] ... version: 5 <6>[ 0.943111] ... bit width: 48 <6>[ 0.943118] ... generic registers: 8 <6>[ 0.943125] ... value mask: 0000ffffffffffff <6>[ 0.943134] ... max period: 00007fffffffffff <6>[ 0.943143] ... fixed-purpose events: 4 <6>[ 0.943150] ... event mask: 0000000f000000ff <6>[ 0.943216] signal: max sigframe size: 3632 <6>[ 0.943240] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.944817] rcu: Hierarchical SRCU implementation. <6>[ 0.944825] rcu: Max phase no-delay instances is 400. <6>[ 0.946868] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.947461] smp: Bringing up secondary CPUs ... <6>[ 0.947752] smpboot: x86: Booting SMP configuration: <6>[ 0.947766] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.007473] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 0.007473] ... version: 5 <6>[ 0.007473] ... bit width: 48 <6>[ 0.007473] ... generic registers: 8 <6>[ 0.007473] ... value mask: 0000ffffffffffff <6>[ 0.007473] ... max period: 00007fffffffffff <6>[ 0.007473] ... fixed-purpose events: 3 <6>[ 0.007473] ... event mask: 00000007000000ff <4>[ 0.959085] #1 #3 #5 #7 #9 #11 <6>[ 0.964815] smp: Brought up 1 node, 22 CPUs <6>[ 0.964838] smpboot: Max logical packages: 1 <6>[ 0.964845] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.969967] devtmpfs: initialized <6>[ 0.971135] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb6000-0x6fedcfff] (1208320 bytes) <6>[ 0.971247] Running RCU synchronous self tests <6>[ 0.971267] Running RCU synchronous self tests <6>[ 0.971831] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.971850] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 0.972132] pinctrl core: initialized pinctrl subsystem <6>[ 0.972577] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.973776] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.973779] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.973789] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.973853] cpuidle: using governor menu <6>[ 0.973867] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.974121] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 0.974152] PCI: not using MMCONFIG <6>[ 0.974161] PCI: Using configuration type 1 for base access <4>[ 0.975791] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 0.976868] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.977059] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.977077] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.977987] cryptd: max_cpu_qlen set to 1000 <6>[ 0.995788] raid6: avx2x4 gen() 45906 MB/s <6>[ 1.012787] raid6: avx2x2 gen() 56589 MB/s <6>[ 1.029787] raid6: avx2x1 gen() 54895 MB/s <6>[ 1.029794] raid6: using algorithm avx2x2 gen() 56589 MB/s <6>[ 1.046789] raid6: .... xor() 37188 MB/s, rmw enabled <6>[ 1.046799] raid6: using avx2x2 recovery algorithm <6>[ 1.047116] ACPI: Added _OSI(Module Device) <6>[ 1.047123] ACPI: Added _OSI(Processor Device) <6>[ 1.047130] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 1.047137] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 1.054834] Callback from call_rcu_tasks() invoked. <6>[ 1.437699] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 1.448762] ACPI: EC: EC started <6>[ 1.448775] ACPI: EC: interrupt blocked <6>[ 1.453056] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 1.453067] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.718226] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 3.284678] ACPI: Interpreter enabled <6>[ 3.284810] ACPI: PM: (supports S0 S4 S5) <6>[ 3.284821] ACPI: Using IOAPIC for interrupt routing <6>[ 3.284980] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 3.316686] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 3.316714] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 3.316728] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.342725] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 3.342760] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 3.389270] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 3.517531] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 3.524142] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 3.541774] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 3.549019] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 3.562445] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 3.568273] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 3.574819] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 3.581362] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 3.646490] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 3.646797] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 3.647098] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 3.943127] ACPI: \_TZ_.FN00: New power resource <6>[ 3.943700] ACPI: \_TZ_.FN01: New power resource <6>[ 3.944261] ACPI: \_TZ_.FN02: New power resource <6>[ 3.944834] ACPI: \_TZ_.FN03: New power resource <6>[ 3.945402] ACPI: \_TZ_.FN04: New power resource <6>[ 3.949382] ACPI: \PIN_: New power resource <6>[ 3.951947] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 3.951968] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 3.955417] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 3.962135] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 3.970955] PCI host bridge to bus 0000:00 <6>[ 3.970967] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 3.970980] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 3.970992] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 3.971006] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 3.971020] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 3.971034] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 3.980358] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 3.980924] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 3.980948] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 3.980970] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 3.981024] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 3.981037] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 3.981095] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 3.982245] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 3.982272] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 3.983451] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 3.983471] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 3.983503] pci 0000:00:05.0: enabling Extended Tags <6>[ 3.984517] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 3.984791] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 3.989185] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 3.989417] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 3.993281] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 3.993518] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 3.997345] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 3.997373] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 3.997799] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 3.997817] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 3.997848] pci 0000:00:0a.0: enabling Extended Tags <6>[ 3.998056] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 3.998076] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 3.998101] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 3.998535] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 3.998562] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 3.998650] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 4.000202] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 4.000229] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 4.000255] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 4.000331] pci 0000:00:0d.3: supports D1 D2 <6>[ 4.000339] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.001537] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 4.001561] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 4.001635] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 4.004026] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 4.004053] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 4.004141] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 4.005975] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 4.006003] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 4.006025] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 4.006346] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 4.006404] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.007773] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 4.007840] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.009207] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 4.009267] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.010648] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 4.010706] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.012050] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 4.012081] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 4.012186] pci 0000:00:16.0: PME# supported from D3hot <6>[ 4.014484] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 4.014506] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 4.014521] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 4.014885] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 4.014944] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.015591] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 4.015650] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.016996] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 4.018316] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 4.018371] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 4.018437] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 4.018573] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 4.018956] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 4.018988] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 4.019025] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 4.020139] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 4.020183] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 4.020493] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 4.020529] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 4.020688] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 4.022357] pci 0000:01:00.0: [2646:2263] type 00 class 0x010802 <6>[ 4.022394] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 4.023521] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 4.023534] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 4.023705] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 4.023718] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 4.023734] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 4.023882] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 4.023895] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 4.023910] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 4.023940] pci_bus 0000:00: on NUMA node 0 <6>[ 6.983532] Low-power S0 idle used by default for system suspend <6>[ 7.365172] ACPI: EC: interrupt unblocked <6>[ 7.365185] ACPI: EC: event unblocked <6>[ 7.365228] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 7.365239] ACPI: EC: GPE=0x6e <6>[ 7.365249] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 7.365265] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 7.366003] iommu: Default domain type: Translated <6>[ 7.366003] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 7.366280] SCSI subsystem initialized <7>[ 7.366325] libata version 3.00 loaded. <6>[ 7.366325] ACPI: bus type USB registered <6>[ 7.366325] usbcore: registered new interface driver usbfs <6>[ 7.366325] usbcore: registered new interface driver hub <6>[ 7.366801] usbcore: registered new device driver usb <6>[ 7.367023] efivars: Registered efivars operations <6>[ 7.367023] Advanced Linux Sound Architecture Driver Initialized. <6>[ 7.368210] PCI: Using ACPI for IRQ routing <7>[ 7.385944] PCI: pci_cache_line_size set to 64 bytes <6>[ 7.386397] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 7.386653] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 7.386663] e820: reserve RAM buffer [mem 0x67f4b000-0x67ffffff] <7>[ 7.386666] e820: reserve RAM buffer [mem 0x67fac000-0x67ffffff] <7>[ 7.386669] e820: reserve RAM buffer [mem 0x6ca3e000-0x6fffffff] <7>[ 7.386672] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 7.386851] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 7.386851] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 7.386851] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 7.386862] vgaarb: loaded <6>[ 7.386965] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 7.386981] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 7.388917] clocksource: Switched to clocksource tsc-early <6>[ 7.389642] pnp: PnP ACPI init <6>[ 7.390382] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 7.390397] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 7.390953] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 7.392276] system 00:03: [io 0x06a4] has been reserved <6>[ 7.392289] system 00:03: [io 0x06a0] has been reserved <6>[ 7.411874] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 7.411894] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 7.411910] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 7.411924] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 7.411939] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 7.411954] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 7.411970] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 7.411984] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 7.416897] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 7.418114] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 7.421623] pnp: PnP ACPI: found 8 devices <6>[ 7.431883] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 7.432107] NET: Registered PF_INET protocol family <6>[ 7.432403] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.434683] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 7.434956] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 7.434982] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.435213] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 7.437217] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 7.437566] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 7.438252] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 7.438933] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 7.438971] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 7.438986] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 7.439021] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 7.439031] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 7.439041] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 7.439097] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 7.439147] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 7.439198] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 7.439246] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 7.439297] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 7.439346] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 7.439383] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 7.439413] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 7.439429] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 7.439446] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 7.439458] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 7.439470] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.439498] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 7.439507] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 7.439519] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 7.439531] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.439548] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 7.439558] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 7.439567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 7.439577] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 7.439588] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 7.439599] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 7.439609] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 7.439617] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 7.439627] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.439638] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 7.439647] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 7.439656] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.440769] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 7.442562] PCI: CLS 0 bytes, default 64 <6>[ 7.442643] DMAR: No RMRR found <6>[ 7.442662] DMAR: No ATSR found <6>[ 7.442669] DMAR: IOMMU feature nest inconsistent <6>[ 7.442672] DMAR: IOMMU feature sc_support inconsistent <6>[ 7.442685] DMAR: dmar0: Using Queued invalidation <6>[ 7.442719] DMAR: dmar1: Using Queued invalidation <6>[ 7.443678] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 7.444940] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 7.445002] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 7.445056] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 7.445130] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 7.445220] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 7.445298] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 7.445357] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 7.445410] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 7.445463] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 7.445551] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 7.445598] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 7.445663] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 7.445742] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 7.445788] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 7.445893] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 7.445940] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 7.445986] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 7.446033] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 7.446111] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 7.446161] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 7.446241] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 7.446291] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 7.446408] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 7.446458] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 7.446512] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 7.446565] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 7.446614] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 7.446688] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 7.460188] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 7.460200] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 7.460209] software IO TLB: mapped [mem 0x00000000635be000-0x00000000675be000] (64MB) <6>[ 7.460594] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.460607] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.460616] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.460625] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.460634] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.462626] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 7.462689] clocksource: Switched to clocksource tsc <6>[ 7.462788] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 7.473503] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 7.475783] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 7.479357] NET: Registered PF_ALG protocol family <6>[ 7.479378] xor: measuring software checksum speed <6>[ 7.479628] prefetch64-sse : 41341 MB/sec <6>[ 7.479881] generic_sse : 40187 MB/sec <6>[ 7.479888] xor: using function: prefetch64-sse (41341 MB/sec) <6>[ 7.479938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 7.479952] io scheduler mq-deadline registered <6>[ 7.479960] io scheduler kyber registered <6>[ 7.481532] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 7.482674] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 7.482808] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 7.484341] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 7.484465] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 7.485085] efifb: probing for efifb <6>[ 7.485111] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 7.485123] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 7.485132] efifb: scrolling: redraw <6>[ 7.485138] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 7.489378] Console: switching to colour frame buffer device 360x112 <6>[ 7.493195] fb0: EFI VGA frame buffer device <6>[ 7.493923] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 7.494132] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 7.497585] ACPI: button: Lid Switch [LID0] <6>[ 7.497762] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 7.497883] ACPI: button: Sleep Button [SLPB] <6>[ 7.498021] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 7.501548] ACPI: button: Power Button [PWRB] <6>[ 7.574667] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 7.574688] ACPI: thermal: Thermal Zone [TZ00] (40 C) <6>[ 7.575288] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 7.575774] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 7.576150] ACPI: battery: Slot [BAT0] (battery present) <6>[ 7.576503] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 7.576862] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 7.578356] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 7.579632] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 7.580496] Non-volatile memory driver v1.3 <6>[ 7.580627] Linux agpgart interface v0.103 <6>[ 7.613594] ACPI: bus type drm_connector registered <6>[ 7.624079] loop: module loaded <6>[ 7.624713] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 7.624978] nvme nvme0: pci function 0000:01:00.0 <6>[ 7.625388] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.625470] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 7.628140] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.628995] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.629021] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 7.629048] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.629273] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 7.629305] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.629327] usb usb1: Product: xHCI Host Controller <6>[ 7.629342] usb usb1: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 7.629365] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 7.629927] hub 1-0:1.0: USB hub found <6>[ 7.630001] hub 1-0:1.0: 1 port detected <4>[ 7.630632] nvme nvme0: missing or invalid SUBNQN field. <6>[ 7.632454] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 7.632488] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.632518] usb usb2: Product: xHCI Host Controller <6>[ 7.632534] usb usb2: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 7.632559] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 7.632974] hub 2-0:1.0: USB hub found <6>[ 7.633021] hub 2-0:1.0: 4 ports detected <6>[ 7.635733] nvme nvme0: 15/0/0 default/read/poll queues <6>[ 7.643971] nvme0n1: p1 p2 <6>[ 7.650786] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.650819] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 7.652397] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.653289] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.653314] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 7.653340] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.653473] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 7.653527] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.653550] usb usb3: Product: xHCI Host Controller <6>[ 7.653566] usb usb3: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 7.653589] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 7.654047] hub 3-0:1.0: USB hub found <6>[ 7.654089] hub 3-0:1.0: 12 ports detected <6>[ 7.675928] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 7.675957] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.675979] usb usb4: Product: xHCI Host Controller <6>[ 7.675993] usb usb4: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 7.676017] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 7.676409] hub 4-0:1.0: USB hub found <6>[ 7.676449] hub 4-0:1.0: 2 ports detected <6>[ 7.679612] usbcore: registered new interface driver usb-storage <6>[ 7.679834] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 7.679855] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 8.381484] i8042: Can't read CTR while initializing i8042 <4>[ 8.381512] i8042: probe of i8042 failed with error -5 <6>[ 8.381706] mousedev: PS/2 mouse device common for all mice <6>[ 8.382104] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 8.383481] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 8.383656] rtc_cmos rtc_cmos: setting system clock to 1998-01-26T17:26:04 UTC (885835564) <6>[ 8.383767] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 8.383853] IR JVC protocol handler initialized <6>[ 8.383868] IR MCE Keyboard/mouse protocol handler initialized <6>[ 8.383885] IR NEC protocol handler initialized <6>[ 8.383898] IR RC5(x/sz) protocol handler initialized <6>[ 8.383913] IR RC6 protocol handler initialized <6>[ 8.383926] IR SANYO protocol handler initialized <6>[ 8.384714] IR Sharp protocol handler initialized <6>[ 8.385458] IR Sony protocol handler initialized <6>[ 8.386250] IR XMP protocol handler initialized <6>[ 8.389067] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 8.389846] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 8.390618] device-mapper: uevent: version 1.0.3 <6>[ 8.391523] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 8.392288] intel_pstate: Intel P-state driver initializing <6>[ 8.398695] intel_pstate: HWP enabled <6>[ 8.401186] sdhci: Secure Digital Host Controller Interface driver <6>[ 8.403679] sdhci: Copyright(c) Pierre Ossman <6>[ 8.419028] pstore: Registered efi_pstore as persistent store backend <6>[ 8.423262] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.429325] usbcore: registered new interface driver usbhid <6>[ 8.433657] usbhid: USB HID core driver <6>[ 8.440190] pci 0000:00:08.0: Setting to D3hot <6>[ 8.457181] pci 0000:00:05.0: Setting to D3hot <6>[ 8.474123] pci 0000:00:0b.0: Setting to D3hot <6>[ 8.491073] pci 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 8.496405] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 8.502082] intel_pmc_core INT33A1:00: initialized <6>[ 8.508158] intel_rapl_msr: PL4 support detected. <6>[ 8.513777] intel_rapl_common: Found RAPL domain package <6>[ 8.518672] intel_rapl_common: Found RAPL domain core <6>[ 8.523629] intel_rapl_common: Found RAPL domain uncore <6>[ 8.528148] intel_rapl_common: Found RAPL domain psys <6>[ 8.545164] Initializing XFRM netlink socket <6>[ 8.550976] NET: Registered PF_INET6 protocol family <6>[ 8.563801] Segment Routing with IPv6 <6>[ 8.568424] In-situ OAM (IOAM) with IPv6 <6>[ 8.573274] mip6: Mobile IPv6 <6>[ 8.577806] NET: Registered PF_PACKET protocol family <6>[ 8.582215] NET: Registered PF_KEY protocol family <6>[ 8.607474] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 8.630705] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 8.633364] IPI shorthand broadcast: enabled <6>[ 8.637050] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 8.637079] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 8.645470] AVX2 version of gcm_enc/dec engaged. <6>[ 8.651932] usb 4-1: Manufacturer: Realtek <6>[ 8.651947] usb 4-1: SerialNumber: 000001 <6>[ 8.672458] AES CTR mode by8 optimization enabled <6>[ 8.755633] sched_clock: Marking stable (8749015749, 6473804)->(8786864902, -31375349) <6>[ 8.761809] registered taskstats version 1 <6>[ 8.865606] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 8.889344] Btrfs loaded, zoned=no, fsverity=no <6>[ 8.894329] pstore: Using crash dump compression: deflate <6>[ 8.916260] clk: Disabling unused clocks <6>[ 8.921649] ALSA device list: <6>[ 8.926137] No soundcards found. <6>[ 8.932420] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 9.120717] EXT4-fs (nvme0n1p2): mounted filesystem 9fe6343d-53a8-4ecc-a3ac-565675bd42c9 ro with ordered data mode. Quota mode: disabled. <6>[ 9.125856] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 9.134415] devtmpfs: mounted <6>[ 9.142342] Freeing unused kernel image (initmem) memory: 2564K <6>[ 9.146720] Write protecting the kernel read-only data: 22528k <6>[ 9.153144] Freeing unused kernel image (rodata/data gap) memory: 704K <6>[ 9.156876] Run /sbin/init as init process <7>[ 9.161361] with arguments: <7>[ 9.161378] /sbin/init <7>[ 9.161394] 3 <7>[ 9.161408] with environment: <7>[ 9.161421] HOME=/ <7>[ 9.161435] TERM=linux <7>[ 9.161449] BOOT_IMAGE=/boot/drm_intel <7>[ 9.480547] systemd[1]: System time before build time, advancing clock. <7>[ 9.827768] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 9.840197] systemd[1]: Detected architecture x86-64. <7>[ 9.941841] systemd[1]: Set hostname to . <6>[ 10.165369] cat (191) used greatest stack depth: 12696 bytes left <6>[ 10.169633] friendly-recove (188) used greatest stack depth: 11768 bytes left <7>[ 11.134559] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 11.139713] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 11.155525] systemd[1]: Created slice system-modprobe.slice. <7>[ 11.189584] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 11.222847] systemd[1]: Created slice User and Session Slice. <7>[ 11.253462] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 11.283154] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 11.288718] systemd[1]: Reached target Remote File Systems. <7>[ 11.318187] systemd[1]: Reached target Slices. <7>[ 11.349361] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 11.381089] systemd[1]: Listening on Syslog Socket. <7>[ 11.412184] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 11.443209] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 11.513539] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 11.520426] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 11.552442] systemd[1]: Listening on Journal Socket. <7>[ 11.584175] systemd[1]: Listening on udev Control Socket. <7>[ 11.615042] systemd[1]: Listening on udev Kernel Socket. <7>[ 11.674730] systemd[1]: Mounting Huge Pages File System... <7>[ 11.733619] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 11.792329] systemd[1]: Mounting Kernel Debug File System... <7>[ 11.851414] systemd[1]: Mounting Kernel Trace File System... <7>[ 11.917118] systemd[1]: Starting Journal Service... <7>[ 11.968036] systemd[1]: Starting Set the console keyboard layout... <7>[ 12.019802] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 12.043734] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 12.050181] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 12.081401] systemd[1]: Starting File System Check on Root Device... <7>[ 12.143159] systemd[1]: Starting Load Kernel Modules... <7>[ 12.196304] systemd[1]: Starting udev Coldplug all Devices... <7>[ 12.247234] systemd[1]: Starting Uncomplicated firewall... <7>[ 12.280344] systemd[1]: Started Journal Service. <6>[ 12.945618] EXT4-fs (nvme0n1p2): re-mounted 9fe6343d-53a8-4ecc-a3ac-565675bd42c9 r/w. Quota mode: disabled. <6>[ 13.078542] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 13.174563] systemd-journald[212]: Received client request to flush runtime journal. <5>[ 13.192404] systemd-journald[212]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 14.896552] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 14.913005] pps_core: LinuxPPS API ver. 1 registered <6>[ 14.913020] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 14.950841] PTP clock support registered <6>[ 14.966348] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 14.966621] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 15.018363] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 15.018376] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 15.026110] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 15.232906] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 15.302695] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 15.302720] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 15.302861] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 15.470417] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 15.470450] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 15.489293] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 15.490029] usbcore: registered new device driver r8152-cfgselector <6>[ 15.522058] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 15.522549] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 15.614042] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 15.641211] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 15.714688] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 15.755226] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 15.755665] usbcore: registered new interface driver r8152 <6>[ 15.771785] usbcore: registered new interface driver cdc_ether <6>[ 15.779409] usbcore: registered new interface driver r8153_ecm <6>[ 15.975141] r8152 4-1:1.0 enx00e04c6814c9: renamed from eth0 <6>[ 16.050964] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <4>[ 16.608790] ********************************************************** <4>[ 16.608793] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 16.608795] ** ** <4>[ 16.608798] ** trace_printk() being used. Allocating extra memory. ** <4>[ 16.608800] ** ** <4>[ 16.608802] ** This means that this is a DEBUG kernel and it is ** <4>[ 16.608805] ** unsafe for production use. ** <4>[ 16.608807] ** ** <4>[ 16.608809] ** If you see this message and you are not debugging ** <4>[ 16.608811] ** the kernel, report this immediately to your vendor! ** <4>[ 16.608813] ** ** <4>[ 16.608816] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 16.608818] ********************************************************** <6>[ 16.618623] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 16.950805] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 16.956454] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 16.957927] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 16.958812] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 16.958895] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 16.959887] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 16.961235] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 16.962045] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 16.963049] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 16.964879] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 16.965947] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 16.968007] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 16.968957] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 16.971250] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 16.972068] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 16.972787] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 16.974892] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 16.975633] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 16.976326] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 16.977068] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 16.987775] Console: switching to colour dummy device 80x25 <6>[ 17.000535] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 17.001407] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 17.001448] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 17.002121] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 17.002756] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 17.003231] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 17.004820] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe09018 <7>[ 17.005584] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 17.006141] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 17.006684] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 17.007158] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 17.007629] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 17.008170] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 17.008654] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 17.009082] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 17.009509] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 17.010121] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 17.010731] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 17.011294] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 17.011872] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.012434] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.013014] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 17.013558] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.014103] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.014644] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 17.015165] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.015728] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.016243] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 17.016792] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.017305] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.017848] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 17.018395] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.018960] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.019496] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 17.020039] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.020597] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.022875] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 17.023616] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 17.024229] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 17.024820] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 17.025375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 17.025938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 17.026516] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 17.027064] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 17.027621] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 17.028182] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 17.028760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 17.029305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 17.029871] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 17.030428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 17.030988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 17.031532] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 17.032067] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 17.032578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 17.033088] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 17.033621] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 17.034188] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 17.034858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 17.035402] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 17.035949] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 17.036535] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 17.037058] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 17.037584] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 17.038104] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 17.038626] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 17.039148] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 17.039668] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 17.040191] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 17.040751] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 17.041295] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 17.041876] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 17.042461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 17.043180] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 17.043770] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 17.044407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 17.045215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 17.045942] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 17.046936] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 17.047685] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 17.048397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 17.048990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 17.049561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 17.050171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 17.050767] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 17.050898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 17.051608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 17.052166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 17.052711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 17.053451] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 17.065430] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6>[ 17.067862] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.12) <7>[ 17.069162] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 17.069795] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 17.070299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 17.070872] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 17.071360] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 17.071844] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 17.072313] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <7>[ 17.092185] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 17.099632] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 17.102686] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <6>[ 17.103465] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 17.103341] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 17.104509] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 17.105134] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 17.105902] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 17.106519] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 17.107060] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 17.107660] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 17.108218] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 17.108817] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 17.109405] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 17.109974] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 17.110519] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 17.111189] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 17.111890] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 17.112381] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 17.112847] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 17.113269] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 17.113702] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 17.114238] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 17.114986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 17.117262] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 17.118016] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 17.121366] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 17.122460] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 17.123443] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 17.124717] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 17.126693] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 17.129717] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 17.130271] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 17.142277] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 17.142346] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 17.142364] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 17.142604] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 17.143994] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 17.145381] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 17.146116] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 17.146733] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 17.147368] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 17.147889] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 17.148334] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 17.148784] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 17.149198] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 17.149769] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 17.150972] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 17.151565] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 17.152826] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 17.153311] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 17.154120] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 17.155286] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 17.156112] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 17.157229] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 17.157928] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 17.158739] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 17.159287] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 17.159791] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 17.160536] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 17.161137] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 17.161802] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 17.162873] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 17.163536] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 17.164181] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 17.166256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 17.167136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 17.167939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 17.168722] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 17.169249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 17.169772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 17.170252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 17.170761] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 17.171243] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 17.171757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 17.172511] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 17.173026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 17.173510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 17.173960] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 17.174399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 17.174891] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 17.175374] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 17.175863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 17.176329] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 17.176812] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 17.177282] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 17.177773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 17.178240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 17.178726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 17.179188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 17.179680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 17.180149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 17.180652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 17.181906] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 17.182446] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 17.182956] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 17.183412] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 17.183876] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 17.184314] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 17.184767] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 17.185192] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 17.185641] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 17.186112] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 17.186591] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 17.187157] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 17.187714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 17.188205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 17.188686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 17.189134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 17.189600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 17.190120] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 17.190654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 17.191136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 17.191601] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 17.192059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 17.192520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 17.193079] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 17.193619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 17.194137] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 17.194638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 17.195119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 17.195597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 17.196051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 17.196524] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 17.197002] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 17.197500] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 17.197958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 17.198505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 17.198997] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 17.199449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 17.200346] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 17.200962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 17.201512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 17.202017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 17.202533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 17.203023] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 17.203533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 17.204373] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 17.204918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 17.205366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 17.205826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 17.206273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 17.206752] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 17.207211] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 17.207782] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 17.208279] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 17.208766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 17.209229] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 17.209704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 17.210148] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 17.210616] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 17.211147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 17.211640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 17.212098] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 17.212557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 17.212997] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 17.213430] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 17.213887] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 17.214416] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 17.214908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 17.215365] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 17.215824] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 17.216258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 17.216709] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 17.217152] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 17.218408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 17.219046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 17.219605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 17.220107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 17.220611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 17.221108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 17.221627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 17.222116] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 17.222624] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 17.223111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 17.223619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 17.224123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 17.224621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.225111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.225622] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 17.226109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.226612] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 17.227097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 17.227594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 17.228066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 17.228551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 17.229033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 17.229541] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 17.230066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 17.230596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 17.231092] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 17.231596] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.232077] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.232578] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.233063] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 17.233559] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 17.234036] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.234529] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.235012] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.235568] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 17.236091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 17.236602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 17.237091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 17.237908] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 17.238417] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 17.238945] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 17.239428] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 17.240985] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 17.241555] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 17.252951] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 17.270694] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 17.271307] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 17.272030] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 17.272690] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 17.272705] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 17.272712] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 17.272748] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 17.275968] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 17.276616] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 17.277141] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 17.280794] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 17.281406] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 17.283733] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 17.284314] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 17.289738] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 17.290435] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 17.291074] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 17.356026] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 17.356699] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 17.357216] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 17.357731] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 17.358209] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 17.358702] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 17.359163] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 17.359648] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 17.360131] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 17.360651] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 17.361140] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 17.361638] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 17.362105] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 17.362593] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 17.364740] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <7>[ 17.377416] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2200MHz, before = 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 17.380094] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 17.383646] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 17.383669] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 17.384691] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 17.406146] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 17.406196] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 17.407908] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 17.408513] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 17.410079] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 17.410633] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 17.412127] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 17.412663] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 17.416968] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 17.417683] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 17.418259] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <6>[ 17.458810] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 17.483120] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 17.483812] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 17.484336] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 17.484867] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 17.485363] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 17.485898] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 17.486387] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 17.486887] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 17.487373] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 17.487887] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 17.488379] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 17.488883] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 17.489368] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 17.489908] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 17.490421] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 17.492849] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <6>[ 17.492877] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.0 <7>[ 17.510964] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 15ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 17.512028] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 17.520781] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 17.522217] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 17.522231] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 17.522595] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 17.530966] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 17.532358] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 17.533118] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 17.533871] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 17.534556] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 17.535065] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 17.535544] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 17.536009] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 17.536458] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 17.537068] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 17.537606] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 17.538162] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 17.538724] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 17.539249] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 17.539881] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 17.540428] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 17.541081] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 17.541590] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 17.542050] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.542518] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.543470] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.544077] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.544562] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.544999] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.545428] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.545884] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.546321] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.546785] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.547229] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.547677] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.548107] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.548555] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.548990] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.549419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.549859] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.550284] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.550726] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.551152] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.551583] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.551996] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.552405] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.552839] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 17.553381] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 17.553396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 17.554000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 17.554541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 17.555046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 17.555565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 17.556062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 17.556568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 17.557057] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 17.557566] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 17.558055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 17.558562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 17.559049] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 17.559058] i915 0000:00:02.0: pixelformat: RGB <7>[ 17.559064] i915 0000:00:02.0: colorimetry: sRGB <7>[ 17.559071] i915 0000:00:02.0: bpc: 0 <7>[ 17.559078] i915 0000:00:02.0: dynamic range: VESA range <7>[ 17.559085] i915 0000:00:02.0: content type: Not defined <7>[ 17.559092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 17.559602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.560092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 17.560640] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 17.561155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.561685] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 17.562170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 17.562670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 17.563154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 17.563658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 17.564160] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 17.564673] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 17.565208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 17.565741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 17.566253] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 17.566771] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.567270] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.567781] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.568274] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 17.568786] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 17.569274] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.569766] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.570248] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.570733] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 17.571208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 17.571699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 17.572182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 17.572683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 17.573187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 17.573698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 17.575972] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 17.783724] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 17.785208] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 17.791140] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 17.791867] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 17.792418] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 17.843946] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 17.844883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 17.846547] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 17.847229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 17.847806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 17.848297] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 17.848795] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 17.849263] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 17.849745] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 17.850200] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 17.850691] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 17.851161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 17.851645] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 17.852104] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 17.852579] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 17.853048] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 17.853532] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 17.853991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 17.854442] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 17.854915] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 17.855359] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 17.855827] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 17.856275] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 17.856736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 17.857181] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 17.857699] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 17.858435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 17.860732] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 17.861400] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 17.861964] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 18.503923] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 18.504636] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 18.505133] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 18.505678] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <6>[ 18.639726] r8152 4-1:1.0 enx00e04c6814c9: carrier on <7>[ 18.707812] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 18.710163] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 18.710952] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 18.714726] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 18.715772] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 18.717843] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 18.719818] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 18.720896] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 18.723508] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 18.723995] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 18.727473] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 18.728005] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 18.729516] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 18.730871] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 18.731751] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 18.732668] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 18.741832] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 18.744106] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.745712] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 18.749625] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 18.750791] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 18.751867] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 18.752905] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 18.753914] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 18.754936] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 18.755975] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 18.756999] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 18.758012] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 18.758992] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 18.760048] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 18.761091] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 18.763370] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 18.767392] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 18.768709] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 18.769788] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 18.770851] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 18.771880] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 18.773044] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 18.778375] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 18.779602] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 18.780430] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 18.781240] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 18.781991] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 18.782713] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 18.823074] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 18.825207] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 18.832981] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 18.835679] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 18.839858] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 18.842210] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 18.844385] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 18.848328] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 18.850538] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 18.854332] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 18.859074] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 18.861393] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 18.864873] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 18.865065] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 18.872527] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 18.918235] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 18.929910] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 18.938425] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 18.939429] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 18.940159] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 18.942274] [drm:drm_client_modeset_probe] <7>[ 18.943274] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 18.944017] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 18.944030] i915 device info: graphics version: 12.71 <7>[ 18.944038] i915 device info: media version: 13 <7>[ 18.944045] i915 device info: display version: 14 <7>[ 18.944052] i915 device info: graphics stepping: B0 <7>[ 18.944058] i915 device info: media stepping: C0 <7>[ 18.944064] i915 device info: display stepping: C0 <7>[ 18.944070] i915 device info: base die stepping: ** <7>[ 18.944075] i915 device info: gt: 0 <7>[ 18.944080] i915 device info: memory-regions: 0x41 <7>[ 18.944087] i915 device info: page-sizes: 0x211000 <7>[ 18.944093] i915 device info: platform: METEORLAKE <7>[ 18.944099] i915 device info: ppgtt-size: 48 <7>[ 18.944104] i915 device info: ppgtt-type: 2 <7>[ 18.944110] i915 device info: dma_mask_size: 46 <7>[ 18.944116] i915 device info: is_mobile: no <7>[ 18.944121] i915 device info: is_lp: no <7>[ 18.944126] i915 device info: require_force_probe: yes <7>[ 18.944132] i915 device info: is_dgfx: no <7>[ 18.944137] i915 device info: has_64bit_reloc: yes <7>[ 18.944142] i915 device info: has_64k_pages: no <7>[ 18.944147] i915 device info: gpu_reset_clobbers_display: no <7>[ 18.944152] i915 device info: has_reset_engine: yes <7>[ 18.944157] i915 device info: has_3d_pipeline: yes <7>[ 18.944162] i915 device info: has_4tile: yes <7>[ 18.944167] i915 device info: has_flat_ccs: no <7>[ 18.944172] i915 device info: has_global_mocs: yes <7>[ 18.944177] i915 device info: has_gmd_id: yes <7>[ 18.944182] i915 device info: has_gt_uc: yes <7>[ 18.944187] i915 device info: has_heci_pxp: no <7>[ 18.944191] i915 device info: has_heci_gscfi: no <7>[ 18.944196] i915 device info: has_guc_deprivilege: yes <7>[ 18.944201] i915 device info: has_l3_ccs_read: no <7>[ 18.944206] i915 device info: has_l3_dpf: no <7>[ 18.944211] i915 device info: has_llc: no <7>[ 18.944216] i915 device info: has_logical_ring_contexts: yes <7>[ 18.944222] i915 device info: has_logical_ring_elsq: yes <7>[ 18.944227] i915 device info: has_media_ratio_mode: no <7>[ 18.944232] i915 device info: has_mslice_steering: no <7>[ 18.944237] i915 device info: has_oa_bpc_reporting: yes <7>[ 18.944243] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 18.944248] i915 device info: has_oam: yes <7>[ 18.944253] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 18.944258] i915 device info: has_pxp: yes <7>[ 18.944263] i915 device info: has_rc6: yes <7>[ 18.944267] i915 device info: has_rc6p: no <7>[ 18.944272] i915 device info: has_rps: yes <7>[ 18.944277] i915 device info: has_runtime_pm: yes <7>[ 18.944282] i915 device info: has_snoop: yes <7>[ 18.944286] i915 device info: has_coherent_ggtt: no <7>[ 18.944292] i915 device info: tuning_thread_rr_after_dep: no <7>[ 18.944297] i915 device info: unfenced_needs_alignment: no <7>[ 18.944302] i915 device info: hws_needs_physical: no <7>[ 18.944307] i915 device info: has_pooled_eu: no <7>[ 18.944312] i915 device info: cursor_needs_physical: no <7>[ 18.944317] i915 device info: has_cdclk_crawl: yes <7>[ 18.944321] i915 device info: has_cdclk_squash: yes <7>[ 18.944326] i915 device info: has_ddi: yes <7>[ 18.944332] i915 device info: has_dp_mst: yes <7>[ 18.944337] i915 device info: has_dsb: yes <7>[ 18.944342] i915 device info: has_fpga_dbg: yes <7>[ 18.944346] i915 device info: has_gmch: no <7>[ 18.944351] i915 device info: has_hotplug: yes <7>[ 18.944356] i915 device info: has_hti: no <7>[ 18.944361] i915 device info: has_ipc: yes <7>[ 18.944292] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 18.944369] i915 device info: has_overlay: no <7>[ 18.944373] i915 device info: has_psr: yes <7>[ 18.944377] i915 device info: has_psr_hw_tracking: no <7>[ 18.944381] i915 device info: overlay_needs_physical: no <7>[ 18.944386] i915 device info: supports_tv: no <7>[ 18.944390] i915 device info: has_hdcp: yes <7>[ 18.944394] i915 device info: has_dmc: yes <7>[ 18.944397] i915 device info: has_dsc: yes <7>[ 18.944402] i915 device info: rawclk rate: 38400 kHz <7>[ 18.944409] i915 device info: iommu: enabled <7>[ 18.944416] i915 device info: available engines: 400003 <7>[ 18.944446] i915 device info: subslice total: 8 <7>[ 18.944452] i915 device info: geometry dss mask=00000000,000000ff <7>[ 18.944463] i915 device info: compute dss mask=00000000,000000ff <7>[ 18.944467] i915 device info: EU total: 128 <7>[ 18.944473] i915 device info: EU per subslice: 16 <7>[ 18.944513] i915 device info: has slice power gating: no <7>[ 18.944518] i915 device info: has subslice power gating: no <7>[ 18.944524] i915 device info: has EU power gating: no <7>[ 18.944530] i915 device info: available engines: 41400 <7>[ 18.944536] i915 device info: subslice total: 8 <7>[ 18.944543] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 18.944549] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 18.944554] i915 device info: EU total: 128 <7>[ 18.944559] i915 device info: EU per subslice: 16 <7>[ 18.944563] i915 device info: has slice power gating: no <7>[ 18.944569] i915 device info: has subslice power gating: no <7>[ 18.944574] i915 device info: has EU power gating: no <6>[ 18.944583] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 18.944589] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 18.944595] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 18.944677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.948662] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.949278] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 18.950712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 18.951225] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 18.951698] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 18.952095] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 18.952767] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 18.952794] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 18.952807] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 18.952920] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 18.953520] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 18.955549] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.956004] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 18.957548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 18.958289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 18.958974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 18.959883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 18.960927] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 18.962871] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 18.963018] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.963061] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 18.963152] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 18.965592] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 18.965712] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 18.965795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.965875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.967591] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 18.967800] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 18.967951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 18.968090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 18.969910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 18.970041] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 18.970142] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.970243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.971813] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 18.971938] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 18.972030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 18.972123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 18.973614] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 18.973736] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 18.973826] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 18.973915] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 18.975274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 18.975395] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 18.975525] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 18.975572] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 18.975603] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 18.975632] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 18.975660] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 18.975692] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 18.975718] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 18.976260] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 18.976391] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 18.976420] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 18.976447] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 18.976473] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 18.976608] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 18.977025] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 18.977346] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 18.998007] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 19.002221] fbcon: i915drmfb (fb0) is primary device <7>[ 19.007717] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 19.008994] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 19.010088] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 19.011107] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 19.012107] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 19.013092] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 19.014209] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 19.015457] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 19.016526] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 19.017424] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 19.018833] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 19.019825] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 19.020752] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 19.021861] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 19.022904] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 19.023904] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 19.024894] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 19.025971] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 19.027087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 19.028111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 19.029082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 19.030024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 19.031112] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 19.032166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 19.033114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 19.034071] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 19.035299] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 19.036797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 19.038021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 19.039083] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 19.039095] i915 0000:00:02.0: pixelformat: RGB <7>[ 19.039104] i915 0000:00:02.0: colorimetry: sRGB <7>[ 19.039113] i915 0000:00:02.0: bpc: 0 <7>[ 19.039121] i915 0000:00:02.0: dynamic range: VESA range <7>[ 19.039130] i915 0000:00:02.0: content type: Not defined <7>[ 19.039141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 19.040165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.041347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.042301] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 19.043287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 19.044264] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 19.045228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 19.046186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 19.047113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 19.048042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 19.049523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 19.050713] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 19.052144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 19.053700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 19.055028] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 19.056326] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.057612] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.058963] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.060617] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 19.061857] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 19.063237] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.064558] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.065730] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.067341] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 19.069031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 19.070257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 19.071540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 19.072725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 19.073864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 19.074974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 19.076088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 19.077188] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 19.081042] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 19.083088] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 19.084251] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 19.085531] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 19.086696] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 19.087861] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 19.089031] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 19.090203] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 19.091358] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 19.092539] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 19.093598] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 19.094658] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 19.095700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 19.096725] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 19.097760] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 19.098832] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 19.099930] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 19.101001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 19.102058] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 19.103099] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 19.104168] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 19.105241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 19.106305] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 19.119563] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 19.124904] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 19.125453] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 19.128100] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 19.129390] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 19.130615] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 19.131558] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 19.132473] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 19.133576] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 19.134609] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 19.135653] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 19.136660] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 19.137658] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 19.138737] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 19.144089] Console: switching to colour frame buffer device 360x112 <6>[ 19.182611] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 19.199041] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 19.199187] [drm:drm_client_modeset_probe] <7>[ 19.200541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 19.200704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 19.205248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 19.206562] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 19.207854] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.208608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 19.210065] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 19.210620] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 19.211185] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 19.211869] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 19.213504] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 19.213526] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 19.213536] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 19.213668] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 19.214109] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 19.220740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.221610] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 19.225623] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 19.225715] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.225733] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 19.225791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 19.227199] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 19.227247] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.227287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.227879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 19.227924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 19.227973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 19.228936] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 19.228987] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.229032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.229662] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 19.229705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 19.229747] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 19.230409] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 19.230472] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 19.230583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 19.231191] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 19.231236] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 19.231251] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 19.231261] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 19.231271] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 19.231280] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 19.231290] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 19.231299] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 19.231736] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 19.231843] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 19.231857] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 19.231869] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 19.231881] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 19.232090] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 19.243065] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 255 us, max time under evasion is 250 us <7>[ 19.272634] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 19.273171] [drm:drm_client_modeset_probe] <7>[ 19.273462] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 19.273938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 19.276518] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.276975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 19.278529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 19.278894] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 19.279250] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 19.279690] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 19.280209] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 19.280229] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 19.280241] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 19.280303] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 19.280888] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 19.282994] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.283367] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 19.284836] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 19.284878] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.284893] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 19.284936] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 19.285352] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 19.285391] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.285427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.285933] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 19.285978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 19.286019] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 19.286626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 19.286678] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.286725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.287321] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 19.287369] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 19.287416] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 19.288043] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 19.288100] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 19.288151] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 19.288856] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 19.288911] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 19.288931] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 19.288945] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 19.288959] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 19.288974] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 19.288988] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 19.289002] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 19.289118] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 19.289161] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 19.289176] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 19.289191] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 19.289206] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 19.289263] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 19.309886] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 19.310798] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 19.311607] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 19.312527] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 19.313424] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 19.314421] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 19.315343] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 19.316164] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 19.317014] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 19.317942] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 19.318871] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 19.319773] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 19.320661] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 19.321541] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 19.322399] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 19.323357] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 19.324178] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 19.324997] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 19.325620] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 19.326226] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 19.326865] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 19.327468] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 19.328215] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 19.328974] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 19.329856] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 19.330586] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 19.331368] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 19.332181] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 19.332923] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 19.333651] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 19.334464] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 19.335229] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 19.335973] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 19.336705] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 19.337404] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 19.338235] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 19.353579] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 19.357633] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 19.368582] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 19.372823] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 19.404279] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 19.405304] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 22.345430] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 22.346758] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 22.910115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 22.911376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 22.912045] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 22.912402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 22.921756] systemd-udevd (291) used greatest stack depth: 11528 bytes left <6>[ 22.939661] systemd-udevd (285) used greatest stack depth: 11216 bytes left <6>[ 22.949083] systemd-udevd (315) used greatest stack depth: 11096 bytes left <7>[ 24.997558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 24.999931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 25.013895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 25.015293] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 25.016657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 38.953653] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=672 'systemd' <5>[ 39.414610] systemd-journald[212]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 39.490042] systemd-journald[212]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 40.358214] fuse: init (API version 7.38)