<5>[ 0.000000] Linux version 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Jul 9 21:17:08 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca41fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca42000-0x000000006fdb9fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdba000-0x000000006fee0fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fee1000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe16000 SMBIOS=0x6cb19000 MEMATTR=0x67f8f018 ESRT=0x67b9f198 TPMEventLog=0x67ead018 <6>[ 0.000000] efi: Remove mem284: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem286: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000389] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000392] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000394] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000395] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000398] esrt: Reserving ESRT space from 0x0000000067b9f198 to 0x0000000067b9f310. <7>[ 0.000403] e820: update [mem 0x67b9f000-0x67b9ffff] usable ==> reserved <6>[ 0.000423] Using GB pages for direct mapping <6>[ 0.001157] printk: log_buf_len: 1048576 bytes <6>[ 0.001159] printk: early log buf free: 259064(98%) <6>[ 0.001160] Secure boot disabled <6>[ 0.001162] ACPI: Early table checksum verification disabled <6>[ 0.001164] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001168] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001173] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001177] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001180] ACPI: FACS 0x000000006FDFB000 000040 <6>[ 0.001182] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001184] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001186] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001188] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001191] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001193] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001195] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001197] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001199] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001202] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001204] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001206] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001208] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001210] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001212] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001214] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001217] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001219] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001221] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001223] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001225] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001227] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001229] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001231] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001234] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001236] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001238] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001240] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001242] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001244] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001246] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001249] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001251] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001253] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001255] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001257] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001259] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001262] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001264] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001266] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001268] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001270] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001271] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001272] ACPI: Reserving FACS table memory at [mem 0x6fdfb000-0x6fdfb03f] <6>[ 0.001272] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001273] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001273] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001274] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001275] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001275] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001276] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001276] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001277] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001278] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001278] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001279] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001279] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001280] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001281] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001281] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001282] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001282] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001283] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001284] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001284] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001285] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001286] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001286] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001287] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001287] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001288] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001289] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001289] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001290] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001291] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001291] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001292] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001292] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001293] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001294] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001294] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001295] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001295] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001296] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001297] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001308] Setting APIC routing to cluster x2apic. <6>[ 0.045550] Zone ranges: <6>[ 0.045552] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045554] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045556] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045557] Movable zone start for each node <6>[ 0.045557] Early memory node ranges <6>[ 0.045558] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045559] node 0: [mem 0x0000000000100000-0x000000006ca41fff] <6>[ 0.045560] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045561] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045563] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045566] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045601] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.047998] On node 0, zone DMA32: 13757 pages in unavailable ranges <6>[ 0.090137] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.090523] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.090529] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.090574] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.090577] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.090578] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.090581] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.090582] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.090590] e820: update [mem 0x67fa8000-0x67fc2fff] usable ==> reserved <6>[ 0.090597] TSC deadline timer available <6>[ 0.090598] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.090607] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.090608] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.090609] PM: hibernation: Registered nosave memory: [mem 0x67b9f000-0x67b9ffff] <6>[ 0.090610] PM: hibernation: Registered nosave memory: [mem 0x67fa8000-0x67fc2fff] <6>[ 0.090611] PM: hibernation: Registered nosave memory: [mem 0x6ca42000-0x6fdb9fff] <6>[ 0.090611] PM: hibernation: Registered nosave memory: [mem 0x6fdba000-0x6fee0fff] <6>[ 0.090612] PM: hibernation: Registered nosave memory: [mem 0x6fee1000-0x6fffefff] <6>[ 0.090613] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.090613] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.090614] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.090615] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.090616] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.090621] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.093766] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.095246] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.095250] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.095252] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.095258] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.095263] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.095276] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.095339] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.095371] random: crng init done <6>[ 0.098170] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.099559] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.099660] Built 1 zonelists, mobility grouping on. Total pages: 8177209 <6>[ 0.099663] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.099664] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.100382] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.100396] software IO TLB: area num 32. <6>[ 0.766145] Memory: 32435060K/33228676K available (16384K kernel code, 2617K rwdata, 5440K rodata, 2564K init, 21168K bss, 793360K reserved, 0K cma-reserved) <4>[ 0.766148] ********************************************************** <4>[ 0.766149] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.766149] ** ** <4>[ 0.766150] ** This system shows unhashed kernel memory addresses ** <4>[ 0.766151] ** via the console, logs, and other interfaces. This ** <4>[ 0.766151] ** might reduce the security of your system. ** <4>[ 0.766151] ** ** <4>[ 0.766152] ** If you see this message and you are not debugging ** <4>[ 0.766152] ** the kernel, report this immediately to your system ** <4>[ 0.766153] ** administrator! ** <4>[ 0.766153] ** ** <4>[ 0.766154] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.766154] ********************************************************** <6>[ 0.766324] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.766784] Dynamic Preempt: full <6>[ 0.767012] Running RCU self tests <6>[ 0.767013] Running RCU synchronous self tests <6>[ 0.767054] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.767055] rcu: RCU lockdep checking is enabled. <6>[ 0.767056] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.767056] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.767057] Trampoline variant of Tasks RCU enabled. <6>[ 0.767058] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.767059] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.767125] Running RCU synchronous self tests <6>[ 0.770984] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.771346] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.771671] Console: colour dummy device 80x25 <6>[ 0.771684] printk: console [tty1] enabled <6>[ 0.773669] printk: console [ttyS0] enabled <4>[ 2.244387] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.252057] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.256118] ... MAX_LOCK_DEPTH: 48 <4>[ 2.260270] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.264593] ... CLASSHASH_SIZE: 4096 <4>[ 2.268916] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.273323] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.277815] ... CHAINHASH_SIZE: 65536 <4>[ 2.282224] memory used by lock dependency info: 9461 kB <4>[ 2.287573] memory used for stack traces: 8320 kB <4>[ 2.292323] per task-struct memory footprint: 1920 bytes <6>[ 2.297683] ACPI: Core revision 20230331 <6>[ 2.302513] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 2.311630] APIC: Switch to symmetric I/O mode setup <6>[ 2.316607] DMAR: Host address width 42 <6>[ 2.320453] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.325787] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.334531] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.339853] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 2.348594] DMAR: SATC flags: 0x1 <6>[ 2.351932] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.358271] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.363667] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.374010] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.384007] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 2.394543] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.404969] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.406029] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.406968] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.408155] process: using mwait in idle threads <6>[ 2.408971] CET detected: Indirect Branch Tracking enabled <6>[ 2.409969] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.410968] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.411972] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.412972] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.413968] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.414973] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.415972] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.416984] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.417971] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.418969] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.419969] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.420971] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.421969] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.422969] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 2.435573] Freeing SMP alternatives memory: 36K <6>[ 2.435971] pid_max: default: 32768 minimum: 301 <6>[ 2.445432] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.446990] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.449453] Running RCU synchronous self tests <6>[ 2.449969] Running RCU synchronous self tests <6>[ 2.451134] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.452405] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.453002] Running RCU-tasks wait API self tests <6>[ 2.560981] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.562090] core: cpu_core PMU driver: <6>[ 2.562969] ... version: 5 <6>[ 2.563968] ... bit width: 48 <6>[ 2.566967] ... generic registers: 8 <6>[ 2.567968] ... value mask: 0000ffffffffffff <6>[ 2.568984] ... max period: 00007fffffffffff <6>[ 2.569970] ... fixed-purpose events: 4 <6>[ 2.570968] ... event mask: 0000000f000000ff <6>[ 2.572027] signal: max sigframe size: 3632 <6>[ 2.572985] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 2.574038] rcu: Hierarchical SRCU implementation. <6>[ 2.574968] rcu: Max phase no-delay instances is 400. <6>[ 2.577921] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.578512] smp: Bringing up secondary CPUs ... <6>[ 2.579250] smpboot: x86: Booting SMP configuration: <6>[ 2.579984] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.614482] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.614482] ... version: 5 <6>[ 1.614482] ... bit width: 48 <6>[ 1.614482] ... generic registers: 8 <6>[ 1.614482] ... value mask: 0000ffffffffffff <6>[ 1.614482] ... max period: 00007fffffffffff <6>[ 1.614482] ... fixed-purpose events: 3 <6>[ 1.614482] ... event mask: 00000007000000ff <4>[ 2.636244] #1 #3 #5 #7 #9 #11 <6>[ 2.641038] smp: Brought up 1 node, 22 CPUs <6>[ 2.642975] smpboot: Max logical packages: 1 <6>[ 2.643968] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.650143] devtmpfs: initialized <6>[ 2.651988] ACPI: PM: Registering ACPI NVS region [mem 0x6fdba000-0x6fee0fff] (1208320 bytes) <6>[ 2.653384] Running RCU synchronous self tests <6>[ 2.653982] Running RCU synchronous self tests <6>[ 2.655035] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.655982] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.657243] pinctrl core: initialized pinctrl subsystem <6>[ 2.658392] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.660093] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.660094] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.660970] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.662024] cpuidle: using governor menu <6>[ 2.664038] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.665200] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 2.665982] PCI: not using MMCONFIG <6>[ 2.666977] PCI: Using configuration type 1 for base access <4>[ 2.669204] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.671041] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.672043] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.672978] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.673974] Callback from call_rcu_tasks() invoked. <6>[ 2.674138] cryptd: max_cpu_qlen set to 1000 <6>[ 2.692962] raid6: avx2x4 gen() 56356 MB/s <6>[ 2.710961] raid6: avx2x2 gen() 57621 MB/s <6>[ 2.728962] raid6: avx2x1 gen() 56261 MB/s <6>[ 2.729967] raid6: using algorithm avx2x2 gen() 57621 MB/s <6>[ 2.747961] raid6: .... xor() 39151 MB/s, rmw enabled <6>[ 2.748968] raid6: using avx2x2 recovery algorithm <6>[ 2.750242] ACPI: Added _OSI(Module Device) <6>[ 2.750968] ACPI: Added _OSI(Processor Device) <6>[ 2.751967] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.752968] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.124674] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 3.135548] ACPI: EC: EC started <6>[ 3.135962] ACPI: EC: interrupt blocked <6>[ 3.141145] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.141969] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.400045] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 4.953475] ACPI: Interpreter enabled <6>[ 4.954080] ACPI: PM: (supports S0 S4 S5) <6>[ 4.954971] ACPI: Using IOAPIC for interrupt routing <6>[ 4.956106] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 4.985779] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 4.985986] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 4.986973] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.011386] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.011961] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.053946] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.169584] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.175904] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.191685] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.198425] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.211021] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.217184] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.223780] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.229440] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.288631] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.289237] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.290235] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 5.574400] ACPI: \_TZ_.FN00: New power resource <6>[ 5.575484] ACPI: \_TZ_.FN01: New power resource <6>[ 5.576481] ACPI: \_TZ_.FN02: New power resource <6>[ 5.577471] ACPI: \_TZ_.FN03: New power resource <6>[ 5.578476] ACPI: \_TZ_.FN04: New power resource <6>[ 5.582576] ACPI: \PIN_: New power resource <6>[ 5.585308] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 5.585980] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 5.590115] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 5.597056] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 5.605912] PCI host bridge to bus 0000:00 <6>[ 5.605971] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 5.606972] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 5.607972] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 5.608974] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 5.609973] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 5.610975] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 5.620362] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 5.621498] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 5.621984] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 5.622981] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 5.624013] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 5.624973] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 5.626018] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 5.628016] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 5.628986] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 5.631042] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 5.631979] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 5.632989] pci 0000:00:05.0: enabling Extended Tags <6>[ 5.634699] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 5.635106] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 5.639840] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 5.640204] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 5.644488] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 5.645192] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 5.649483] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 5.649986] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 5.651346] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 5.651978] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 5.652990] pci 0000:00:0a.0: enabling Extended Tags <6>[ 5.654158] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 5.654980] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 5.655985] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 5.657350] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 5.657988] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 5.659046] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 5.661381] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 5.661989] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 5.662982] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 5.664031] pci 0000:00:0d.3: supports D1 D2 <6>[ 5.664968] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 5.667057] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 5.667983] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 5.669032] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 5.672164] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 5.672986] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 5.674052] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 5.676635] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 5.676987] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 5.677982] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 5.679241] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 5.680017] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.682233] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 5.683017] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.685244] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 5.686017] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.688234] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 5.689017] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.691216] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 5.691992] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 5.693061] pci 0000:00:16.0: PME# supported from D3hot <6>[ 5.696090] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 5.696981] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 5.697974] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 5.699281] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 5.700019] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.701578] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 5.702017] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.704201] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 5.706200] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 5.707013] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 5.708026] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 5.709088] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 5.710325] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 5.710991] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 5.711996] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 5.713977] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 5.715003] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 5.716261] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 5.716997] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 5.718119] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 5.720123] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 5.721030] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 5.722860] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 5.722975] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 5.724105] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 5.724995] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 5.725995] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 5.727105] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 5.727994] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 5.728994] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 5.730009] pci_bus 0000:00: on NUMA node 0 <6>[ 8.562034] Low-power S0 idle used by default for system suspend <6>[ 8.942098] ACPI: EC: interrupt unblocked <6>[ 8.942962] ACPI: EC: event unblocked <6>[ 8.943961] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 8.944970] ACPI: EC: GPE=0x6e <6>[ 8.945970] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 8.946976] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 8.948365] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 8.949406] SCSI subsystem initialized <7>[ 8.950009] libata version 3.00 loaded. <6>[ 8.950098] ACPI: bus type USB registered <6>[ 8.951021] usbcore: registered new interface driver usbfs <6>[ 8.951997] usbcore: registered new interface driver hub <6>[ 8.953017] usbcore: registered new device driver usb <6>[ 8.954171] efivars: Registered efivars operations <6>[ 8.955072] Advanced Linux Sound Architecture Driver Initialized. <6>[ 8.956489] PCI: Using ACPI for IRQ routing <7>[ 8.975437] PCI: pci_cache_line_size set to 64 bytes <6>[ 8.975591] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 8.976126] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 8.976135] e820: reserve RAM buffer [mem 0x67b9f000-0x67ffffff] <7>[ 8.976138] e820: reserve RAM buffer [mem 0x67fa8000-0x67ffffff] <7>[ 8.976141] e820: reserve RAM buffer [mem 0x6ca42000-0x6fffffff] <7>[ 8.976143] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 8.976259] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 8.976961] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 8.976961] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 8.976972] vgaarb: loaded <6>[ 8.978132] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 8.978973] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 8.982088] clocksource: Switched to clocksource tsc-early <6>[ 8.988085] pnp: PnP ACPI init <6>[ 8.991935] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 8.997813] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 9.004192] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 9.011274] system 00:03: [io 0x06a4] has been reserved <6>[ 9.016549] system 00:03: [io 0x06a0] has been reserved <6>[ 9.040063] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 9.046632] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.053541] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.060447] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 9.067010] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 9.073916] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 9.080822] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 9.087729] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 9.098873] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 9.105841] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 9.115987] pnp: PnP ACPI: found 8 devices <6>[ 9.130081] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 9.139105] NET: Registered PF_INET protocol family <6>[ 9.144217] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.153797] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 9.162742] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 9.170431] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.178671] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 9.188801] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 9.195670] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.203192] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.211139] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 9.216782] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 9.225143] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 9.233520] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 9.239565] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 9.245609] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 9.253233] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 9.260875] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 9.268536] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 9.276158] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 9.283786] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 9.291408] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 9.298159] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 9.303087] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 9.309821] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 9.315026] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 9.321092] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 9.327841] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.335883] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 9.341089] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 9.347153] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 9.353905] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.361944] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 9.368072] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 9.374201] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 9.381012] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 9.387826] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 9.395070] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 9.401282] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 9.406811] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 9.413025] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.420528] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 9.426050] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 9.432258] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.440749] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 9.447973] PCI: CLS 0 bytes, default 64 <6>[ 9.451944] DMAR: No RMRR found <6>[ 9.455078] DMAR: No ATSR found <6>[ 9.458200] DMAR: IOMMU feature nest inconsistent <6>[ 9.458202] DMAR: IOMMU feature sc_support inconsistent <6>[ 9.462874] DMAR: dmar0: Using Queued invalidation <6>[ 9.472826] DMAR: dmar1: Using Queued invalidation <6>[ 9.478519] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 9.483868] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 9.488926] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 9.493976] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 9.499035] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 9.504100] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 9.509178] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 9.514227] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 9.519284] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 9.524343] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 9.529425] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 9.534553] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 9.539703] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 9.544863] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 9.549996] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 9.555177] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 9.560307] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 9.565440] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 9.570572] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 9.575730] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 9.580863] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 9.586034] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 9.591175] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 9.596384] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 9.601521] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 9.606659] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 9.611798] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 9.616933] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 9.622069] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 9.627937] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 9.634320] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 9.640701] software IO TLB: mapped [mem 0x00000000635c2000-0x00000000675c2000] (64MB) <6>[ 9.648886] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 9.656734] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 9.662433] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 9.668044] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 9.673662] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 9.680989] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 9.690940] clocksource: Switched to clocksource tsc <6>[ 9.695946] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 9.713753] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 9.722310] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 9.729974] NET: Registered PF_ALG protocol family <6>[ 9.734743] xor: measuring software checksum speed <6>[ 9.739726] prefetch64-sse : 45087 MB/sec <6>[ 9.744282] generic_sse : 42710 MB/sec <6>[ 9.748609] xor: using function: prefetch64-sse (45087 MB/sec) <6>[ 9.754434] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 9.761769] io scheduler mq-deadline registered <6>[ 9.766264] io scheduler kyber registered <6>[ 9.771652] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 9.778442] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 9.784340] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.799121] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 9.805033] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.818993] efifb: probing for efifb <6>[ 9.822573] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 9.829387] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 9.835517] efifb: scrolling: redraw <6>[ 9.839069] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 9.848640] Console: switching to colour frame buffer device 360x112 <6>[ 9.858972] fb0: EFI VGA frame buffer device <6>[ 9.863895] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 9.868753] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 9.880582] ACPI: button: Lid Switch [LID0] <6>[ 9.884914] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 9.893298] ACPI: button: Sleep Button [SLPB] <6>[ 9.897752] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 9.906554] ACPI: button: Power Button [PWRB] <6>[ 9.972499] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 9.978125] ACPI: thermal: Thermal Zone [TZ00] (37 C) <6>[ 9.983674] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 9.984423] ACPI: battery: Slot [BAT0] (battery present) <6>[ 9.995306] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 9.995640] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 10.004052] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 10.015437] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 10.022492] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 10.031329] Non-volatile memory driver v1.3 <6>[ 10.035616] Linux agpgart interface v0.103 <6>[ 10.072416] ACPI: bus type drm_connector registered <6>[ 10.087176] loop: module loaded <6>[ 10.090895] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 10.091456] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.097568] nvme nvme0: pci function 0000:01:00.0 <6>[ 10.102579] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 10.115689] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 10.125399] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.130602] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 10.137040] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 10.137933] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 10.150754] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 10.158967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.166146] usb usb1: Product: xHCI Host Controller <6>[ 10.170996] usb usb1: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 10.179192] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 10.184321] hub 1-0:1.0: USB hub found <6>[ 10.188094] hub 1-0:1.0: 1 port detected <6>[ 10.189071] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 10.194216] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 10.202903] nvme0n1: p1 p2 <6>[ 10.205352] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.205354] usb usb2: Product: xHCI Host Controller <6>[ 10.220410] usb usb2: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 10.228733] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 10.233709] hub 2-0:1.0: USB hub found <6>[ 10.237531] hub 2-0:1.0: 4 ports detected <6>[ 10.258327] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 10.263541] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 10.272004] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 10.281641] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 10.286843] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 10.294195] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 10.301304] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 10.309521] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.316690] usb usb3: Product: xHCI Host Controller <6>[ 10.321534] usb usb3: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 10.329734] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 10.334722] hub 3-0:1.0: USB hub found <6>[ 10.338492] hub 3-0:1.0: 12 ports detected <6>[ 10.363526] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 10.371770] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.378938] usb usb4: Product: xHCI Host Controller <6>[ 10.383967] usb usb4: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 10.392365] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 10.397477] hub 4-0:1.0: USB hub found <6>[ 10.401463] hub 4-0:1.0: 2 ports detected <6>[ 10.408636] usbcore: registered new interface driver usb-storage <6>[ 10.414942] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 10.421771] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 11.133495] i8042: Can't read CTR while initializing i8042 <4>[ 11.138969] i8042: probe of i8042 failed with error -5 <6>[ 11.144214] mousedev: PS/2 mouse device common for all mice <6>[ 11.150149] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 11.156143] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 11.160976] rtc_cmos rtc_cmos: setting system clock to 1998-01-08T20:23:27 UTC (884291007) <6>[ 11.169259] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 11.176231] IR JVC protocol handler initialized <6>[ 11.180735] IR MCE Keyboard/mouse protocol handler initialized <6>[ 11.186528] IR NEC protocol handler initialized <6>[ 11.191029] IR RC5(x/sz) protocol handler initialized <6>[ 11.196051] IR RC6 protocol handler initialized <6>[ 11.200554] IR SANYO protocol handler initialized <6>[ 11.206127] IR Sharp protocol handler initialized <6>[ 11.211677] IR Sony protocol handler initialized <6>[ 11.217161] IR XMP protocol handler initialized <6>[ 11.223679] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 11.232932] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 11.241249] device-mapper: uevent: version 1.0.3 <6>[ 11.246879] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 11.256154] intel_pstate: Intel P-state driver initializing <6>[ 11.266166] intel_pstate: HWP enabled <6>[ 11.271201] sdhci: Secure Digital Host Controller Interface driver <6>[ 11.279713] sdhci: Copyright(c) Pierre Ossman <6>[ 11.294287] pstore: Registered efi_pstore as persistent store backend <6>[ 11.303017] hid: raw HID events driver (C) Jiri Kosina <6>[ 11.312034] usbcore: registered new interface driver usbhid <6>[ 11.320344] usbhid: USB HID core driver <6>[ 11.328855] pci 0000:00:08.0: Setting to D3hot <6>[ 11.349716] pci 0000:00:05.0: Setting to D3hot <6>[ 11.355371] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 11.371334] pci 0000:00:0b.0: Setting to D3hot <6>[ 11.386868] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 11.392840] pci 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.396114] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <4>[ 11.401435] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 11.409386] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 11.417604] intel_pmc_core INT33A1:00: initialized <6>[ 11.421580] usb 4-1: Manufacturer: Realtek <6>[ 11.427887] intel_rapl_msr: PL4 support detected. <6>[ 11.430666] usb 4-1: SerialNumber: 000001 <6>[ 11.436320] intel_rapl_common: Found RAPL domain package <6>[ 11.508554] intel_rapl_common: Found RAPL domain core <6>[ 11.518391] intel_rapl_common: Found RAPL domain uncore <6>[ 11.528373] intel_rapl_common: Found RAPL domain psys <6>[ 11.548928] Initializing XFRM netlink socket <6>[ 11.559227] NET: Registered PF_INET6 protocol family <6>[ 11.577030] Segment Routing with IPv6 <6>[ 11.585678] In-situ OAM (IOAM) with IPv6 <6>[ 11.594576] mip6: Mobile IPv6 <6>[ 11.602184] NET: Registered PF_PACKET protocol family <6>[ 11.612101] NET: Registered PF_KEY protocol family <6>[ 11.666976] IPI shorthand broadcast: enabled <6>[ 11.676259] AVX2 version of gcm_enc/dec engaged. <6>[ 11.685995] AES CTR mode by8 optimization enabled <6>[ 11.776078] sched_clock: Marking stable (10162013962, 1613482014)->(12989712741, -1214216765) <6>[ 11.791088] registered taskstats version 1 <6>[ 11.909227] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 11.943090] Btrfs loaded, zoned=no, fsverity=no <6>[ 11.952746] pstore: Using crash dump compression: deflate <6>[ 11.980519] clk: Disabling unused clocks <6>[ 11.989234] ALSA device list: <6>[ 11.997081] No soundcards found. <6>[ 12.007445] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 12.652359] EXT4-fs (nvme0n1p2): mounted filesystem fec10944-567b-487d-898f-2dff9231051e ro with ordered data mode. Quota mode: disabled. <6>[ 12.669917] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 12.684801] devtmpfs: mounted <6>[ 12.695574] Freeing unused kernel image (initmem) memory: 2564K <6>[ 12.706286] Write protecting the kernel read-only data: 22528k <6>[ 12.718685] Freeing unused kernel image (rodata/data gap) memory: 704K <6>[ 12.730061] Run /sbin/init as init process <7>[ 12.738935] with arguments: <7>[ 12.738948] /sbin/init <7>[ 12.738959] 3 <7>[ 12.738969] with environment: <7>[ 12.738979] HOME=/ <7>[ 12.738989] TERM=linux <7>[ 12.738999] BOOT_IMAGE=/boot/drm_intel <7>[ 13.014141] systemd[1]: System time before build time, advancing clock. <7>[ 13.353048] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 13.384697] systemd[1]: Detected architecture x86-64. <7>[ 13.427818] systemd[1]: Set hostname to . <6>[ 13.644181] cat (187) used greatest stack depth: 13296 bytes left <6>[ 13.653958] friendly-recove (184) used greatest stack depth: 13040 bytes left <6>[ 13.663529] mkdir (190) used greatest stack depth: 12568 bytes left <6>[ 13.716024] systemd-bless-b (188) used greatest stack depth: 12536 bytes left <7>[ 14.636420] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 14.654452] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 14.679034] systemd[1]: Created slice system-modprobe.slice. <7>[ 14.703715] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 14.727748] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 14.751451] systemd[1]: Created slice User and Session Slice. <7>[ 14.773213] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 14.796166] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 14.813124] systemd[1]: Reached target Remote File Systems. <7>[ 14.832857] systemd[1]: Reached target Slices. <7>[ 14.851458] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 14.876383] systemd[1]: Listening on Syslog Socket. <7>[ 14.895474] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 14.918791] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 14.979356] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 14.994805] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 15.017109] systemd[1]: Listening on Journal Socket. <7>[ 15.037959] systemd[1]: Listening on udev Control Socket. <7>[ 15.059122] systemd[1]: Listening on udev Kernel Socket. <7>[ 15.107770] systemd[1]: Mounting Huge Pages File System... <7>[ 15.167580] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 15.222243] systemd[1]: Mounting Kernel Debug File System... <7>[ 15.279160] systemd[1]: Mounting Kernel Trace File System... <7>[ 15.337302] systemd[1]: Starting Journal Service... <7>[ 15.382943] systemd[1]: Starting Set the console keyboard layout... <7>[ 15.424955] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 15.448305] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 15.462294] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 15.520949] systemd[1]: Starting File System Check on Root Device... <7>[ 15.568355] systemd[1]: Starting Load Kernel Modules... <7>[ 15.615032] systemd[1]: Starting udev Coldplug all Devices... <7>[ 15.639279] systemd[1]: Starting Uncomplicated firewall... <7>[ 15.662635] systemd[1]: Started Journal Service. <6>[ 16.702874] EXT4-fs (nvme0n1p2): re-mounted fec10944-567b-487d-898f-2dff9231051e r/w. Quota mode: disabled. <6>[ 16.827691] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 16.916135] systemd-journald[210]: Received client request to flush runtime journal. <5>[ 16.930435] systemd-journald[210]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 18.241077] pps_core: LinuxPPS API ver. 1 registered <6>[ 18.241090] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 18.245564] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 18.260392] PTP clock support registered <6>[ 18.275460] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 18.275703] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 18.344837] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 18.344849] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 18.350849] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 18.562720] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 18.631814] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 18.631836] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 18.631979] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 18.720295] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 18.720325] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 18.743853] usbcore: registered new device driver r8152-cfgselector <6>[ 18.765258] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 18.802340] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 18.802597] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 18.878294] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 18.900890] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 18.971119] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 19.005923] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 19.006199] usbcore: registered new interface driver r8152 <6>[ 19.018597] usbcore: registered new interface driver cdc_ether <6>[ 19.024094] usbcore: registered new interface driver r8153_ecm <6>[ 19.259253] r8152 4-1:1.0 enxe2015072f33f: renamed from eth0 <6>[ 19.288417] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <4>[ 19.525173] ********************************************************** <4>[ 19.525178] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 19.525181] ** ** <4>[ 19.525186] ** trace_printk() being used. Allocating extra memory. ** <4>[ 19.525191] ** ** <4>[ 19.525195] ** This means that this is a DEBUG kernel and it is ** <4>[ 19.525200] ** unsafe for production use. ** <4>[ 19.525205] ** ** <4>[ 19.525209] ** If you see this message and you are not debugging ** <4>[ 19.525214] ** the kernel, report this immediately to your vendor! ** <4>[ 19.525218] ** ** <4>[ 19.525223] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 19.525227] ********************************************************** <6>[ 19.749338] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 19.753685] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 19.757966] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 19.758679] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 19.759400] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 19.759452] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 19.760168] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 19.763632] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 19.764332] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 19.765161] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 19.766104] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 19.766700] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 19.767992] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 19.768521] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 19.769779] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 19.770273] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 19.770807] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 19.772408] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 19.773001] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 19.773330] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 19.773701] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 19.777311] Console: switching to colour dummy device 80x25 <6>[ 19.785921] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 19.786746] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 19.786787] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 19.787539] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 19.788255] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 19.788890] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 19.790536] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe0d018 <7>[ 19.791335] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 19.792071] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 19.792686] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 19.793249] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 19.793879] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 19.794558] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 19.795148] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 19.795893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 19.796384] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 19.797217] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 19.797966] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 19.798665] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 19.799328] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.800027] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.800703] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 19.801354] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.802042] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.802712] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 19.803345] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.803987] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.804584] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 19.805224] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.805893] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.806530] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 19.807143] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.807782] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.808382] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 19.809043] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.809684] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.812069] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 19.812995] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 19.813871] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 19.814618] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 19.815338] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 19.816130] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 19.816928] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 19.817605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 19.818245] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 19.818944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 19.819623] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 19.820362] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 19.821040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 19.821693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 19.822263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 19.822843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 19.823390] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 19.823966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 19.824508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 19.825046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 19.825594] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 19.826147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 19.826728] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 19.827273] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 19.827840] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 19.828386] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 19.829012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 19.829639] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 19.830163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 19.830708] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 19.831224] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 19.831772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 19.832268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 19.832781] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 19.833332] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 19.833882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 19.834285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 19.834693] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 19.835150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 19.835732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 19.836198] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 19.836762] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 19.837234] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 19.837672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 19.838028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 19.838371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 19.838782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 19.839144] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 19.839184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 19.839572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 19.839904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 19.840233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 19.840707] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 19.843548] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 19.845194] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 19.845814] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 19.846309] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 19.846772] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 19.847195] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 19.847618] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 19.847990] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <6>[ 19.858386] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.12) <7>[ 19.889686] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 19.899362] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 19.902157] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 19.902893] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 19.903722] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 19.904380] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 19.905277] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 19.906076] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 19.906805] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 19.907641] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 19.908195] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 19.908717] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 19.909280] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 19.909714] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 19.910257] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 19.911060] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 19.911721] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 19.912336] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 19.912937] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 19.913473] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 19.914090] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 19.914701] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 19.915553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 19.917720] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 19.918336] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 19.921763] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 19.922774] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 19.923595] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 19.924670] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 19.926566] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 19.929365] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.929735] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 19.940451] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 19.942058] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 19.942094] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 19.942348] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.944402] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 19.946555] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 19.947635] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 19.948198] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 19.948798] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 19.949480] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 19.950022] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 19.950515] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 19.950971] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 19.951627] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 19.952880] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 19.953446] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 19.954911] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 19.955380] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 19.956257] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 19.957769] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 19.958465] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 19.959799] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 19.960540] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 19.961568] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 19.962333] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 19.963010] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 19.963948] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 19.964843] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 19.965826] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 19.967160] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 19.968003] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 19.968874] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 19.970857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 19.971530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 19.972105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 19.972726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 19.973089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 19.973438] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 19.973818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 19.974223] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 19.974584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 19.974937] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 19.975242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 19.975586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 19.975971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 19.976287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 19.976642] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 19.977016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 19.977330] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 19.977691] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 19.978065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 19.978418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 19.978826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 19.979218] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 19.979580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 19.979978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 19.980386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 19.980844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 19.981272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 19.981666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 19.982856] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 19.983359] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 19.984079] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 19.984467] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 19.984911] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 19.985261] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 19.985638] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 19.985975] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 19.986277] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 19.986659] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 19.987003] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 19.987415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 19.987834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 19.988237] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 19.988632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 19.988951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 19.989261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 19.989654] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 19.990069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 19.990444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 19.990830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 19.991226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 19.991701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 19.992149] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 19.992548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 19.992885] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 19.993245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 19.993748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 19.994125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 19.994521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 19.994846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 19.995169] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 19.995540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 19.995878] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 19.996292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 19.996781] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 19.997179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 19.997863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 19.998243] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 19.998672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 19.999156] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 19.999642] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 20.000060] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 20.000609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 20.001308] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 20.001720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 20.002046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 20.002368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 20.002788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 20.003185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 20.003595] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 20.004105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 20.004729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 20.005192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 20.005664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 20.006069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 20.006470] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 20.007041] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 20.007646] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 20.008112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 20.008657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 20.009105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 20.009556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 20.009922] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 20.010293] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 20.010832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 20.011243] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 20.011698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 20.012190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 20.012723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 20.013365] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 20.013974] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 20.015380] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 20.016100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.016904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 20.017564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.018182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.018955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.019575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.020076] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 20.020731] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.021288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.021860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 20.022390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.022999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.023620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.024217] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.024903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.025614] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.026227] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.026957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.027611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.028174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.028761] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.029376] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 20.030142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 20.030820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.031521] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.032117] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.032776] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.033462] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.034159] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.034789] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.035368] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.036099] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.036843] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.037533] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.038154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 20.038910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 20.039643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 20.040905] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 20.041811] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.042712] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.043610] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.045817] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 20.046473] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 20.067940] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 20.094430] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 20.095442] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 20.096363] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 20.097559] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 20.097577] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 20.097588] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 20.097639] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 20.102016] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 20.102716] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 20.103370] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 20.107684] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 20.108865] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 20.110835] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 20.111339] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 20.116513] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.117374] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 20.118360] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <6>[ 20.141585] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 20.231376] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 20.232592] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 20.233658] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 20.234688] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 20.235613] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 20.236375] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 20.237367] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 20.238186] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 20.238975] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 20.239725] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 20.240440] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 20.241368] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 20.242205] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 20.242996] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 20.245408] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <7>[ 20.257787] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2250MHz, before = 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 20.260789] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 20.264909] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 20.264934] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 20.266285] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 20.288301] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 20.288371] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 20.290976] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 20.292255] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 20.295079] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 20.296242] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 20.298757] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 20.299633] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 20.305108] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.306355] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 20.307606] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 20.422976] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 20.424120] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 20.425176] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 20.426191] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 20.427196] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 20.428190] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 20.429018] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 20.429940] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 20.430714] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 20.431576] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 20.432419] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 20.433354] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 20.434232] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 20.434976] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 20.435849] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 20.438619] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <6>[ 20.438645] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.0 <7>[ 20.456664] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 15ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 20.458427] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 20.468167] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <6>[ 20.468646] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 20.469885] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 20.469900] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 20.470149] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 20.480578] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.482027] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.483079] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.483961] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 20.484951] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 20.485953] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 20.486745] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 20.487477] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 20.488390] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 20.489303] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 20.490301] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 20.491430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 20.492408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 20.493189] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 20.494121] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 20.495180] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 20.496475] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 20.497660] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 20.499264] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.500344] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.501329] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.502312] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.503182] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.503943] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.504936] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.506041] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.507027] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.507860] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.508879] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.510020] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.510952] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.511640] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.512183] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.512696] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.513244] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.513851] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.514635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.515272] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.515989] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.516828] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.517557] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.518320] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 20.519224] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 20.519246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 20.520355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.521229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 20.522145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.523093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.523972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.524945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.526034] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 20.527122] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.528234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.529206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 20.530304] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 20.530326] i915 0000:00:02.0: pixelformat: RGB <7>[ 20.530344] i915 0000:00:02.0: colorimetry: sRGB <7>[ 20.530358] i915 0000:00:02.0: bpc: 0 <7>[ 20.530375] i915 0000:00:02.0: dynamic range: VESA range <7>[ 20.530391] i915 0000:00:02.0: content type: Not defined <7>[ 20.530411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.531628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.532549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.533423] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.534401] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.535368] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.536184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.536983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.537965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.538866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.539759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.540635] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 20.541836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 20.542778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.543678] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.544570] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.545407] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.546364] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.547322] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.548327] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.549287] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.550269] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.551203] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.552146] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.553030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 20.553910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 20.554775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 20.555663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 20.556546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 20.557380] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 20.560927] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 20.768780] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 20.771447] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 20.779993] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 20.781297] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 20.782186] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 20.832916] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 20.834382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 20.836929] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 20.838128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 20.839210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 20.840176] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 20.840460] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 20.840652] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 20.840839] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 20.841024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 20.841209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 20.841389] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 20.841574] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 20.841754] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 20.841935] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 20.842118] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 20.842299] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 20.842479] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 20.842665] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 20.842844] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 20.843026] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 20.843207] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 20.843387] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 20.843577] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 20.843763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 20.843987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 20.844330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 20.846093] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 20.847262] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 20.848349] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 21.488851] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 21.490446] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.491888] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 21.493261] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <6>[ 21.629342] r8152 4-1:1.0 enxe2015072f33f: carrier on <7>[ 21.692605] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.696002] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 21.697179] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 21.701597] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 21.702304] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 21.703834] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 21.705684] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 21.706461] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 21.708546] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 21.708986] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 21.711600] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 21.712114] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 21.713260] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 21.714357] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 21.714875] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 21.715617] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 21.725453] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.727684] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.728862] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 21.732096] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 21.733082] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 21.734024] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 21.734979] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 21.735867] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 21.736762] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 21.737620] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 21.738478] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 21.739352] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 21.740230] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 21.741119] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 21.742042] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 21.744087] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 21.746867] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 21.747887] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 21.748982] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 21.750140] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 21.751255] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 21.752607] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 21.757349] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 21.758640] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 21.759773] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 21.760603] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 21.761436] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 21.762385] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 21.795549] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 21.797281] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 21.802265] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 21.804559] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 21.808070] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 21.809704] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 21.811550] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 21.815214] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 21.816753] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 21.818439] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 21.821768] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 21.823647] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 21.827061] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 21.827269] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 21.841816] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 21.936795] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 21.959908] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 21.969043] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 21.969831] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 21.970669] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 21.972787] [drm:drm_client_modeset_probe] <7>[ 21.972618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 21.974086] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 21.973872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 21.974242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.974780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 21.975545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 21.977804] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 21.978352] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 21.978362] i915 device info: graphics version: 12.71 <7>[ 21.978368] i915 device info: media version: 13 <7>[ 21.978373] i915 device info: display version: 14 <7>[ 21.978378] i915 device info: graphics stepping: B0 <7>[ 21.978383] i915 device info: media stepping: C0 <7>[ 21.978391] i915 device info: display stepping: C0 <7>[ 21.978399] i915 device info: base die stepping: ** <7>[ 21.978406] i915 device info: gt: 0 <7>[ 21.978412] i915 device info: memory-regions: 0x41 <7>[ 21.978417] i915 device info: page-sizes: 0x211000 <7>[ 21.978422] i915 device info: platform: METEORLAKE <7>[ 21.978427] i915 device info: ppgtt-size: 48 <7>[ 21.978432] i915 device info: ppgtt-type: 2 <7>[ 21.978437] i915 device info: dma_mask_size: 46 <7>[ 21.978445] i915 device info: is_mobile: no <7>[ 21.978453] i915 device info: is_lp: no <7>[ 21.978460] i915 device info: require_force_probe: yes <7>[ 21.978468] i915 device info: is_dgfx: no <7>[ 21.978476] i915 device info: has_64bit_reloc: yes <7>[ 21.978482] i915 device info: has_64k_pages: no <7>[ 21.978509] i915 device info: gpu_reset_clobbers_display: no <7>[ 21.978517] i915 device info: has_reset_engine: yes <7>[ 21.978521] i915 device info: has_3d_pipeline: yes <7>[ 21.978526] i915 device info: has_4tile: yes <7>[ 21.978530] i915 device info: has_flat_ccs: no <7>[ 21.978535] i915 device info: has_global_mocs: yes <7>[ 21.978539] i915 device info: has_gmd_id: yes <7>[ 21.978543] i915 device info: has_gt_uc: yes <7>[ 21.978548] i915 device info: has_heci_pxp: no <7>[ 21.978552] i915 device info: has_heci_gscfi: no <7>[ 21.978556] i915 device info: has_guc_deprivilege: yes <7>[ 21.978561] i915 device info: has_l3_ccs_read: no <7>[ 21.978566] i915 device info: has_l3_dpf: no <7>[ 21.978571] i915 device info: has_llc: no <7>[ 21.978574] i915 device info: has_logical_ring_contexts: yes <7>[ 21.978578] i915 device info: has_logical_ring_elsq: yes <7>[ 21.978582] i915 device info: has_media_ratio_mode: no <7>[ 21.978586] i915 device info: has_mslice_steering: no <7>[ 21.978590] i915 device info: has_oa_bpc_reporting: yes <7>[ 21.978593] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 21.978597] i915 device info: has_oam: yes <7>[ 21.978601] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 21.978605] i915 device info: has_pxp: yes <7>[ 21.978609] i915 device info: has_rc6: yes <7>[ 21.978613] i915 device info: has_rc6p: no <7>[ 21.978616] i915 device info: has_rps: yes <7>[ 21.978620] i915 device info: has_runtime_pm: yes <7>[ 21.978624] i915 device info: has_snoop: yes <7>[ 21.978629] i915 device info: has_coherent_ggtt: no <7>[ 21.978634] i915 device info: tuning_thread_rr_after_dep: no <7>[ 21.978638] i915 device info: unfenced_needs_alignment: no <7>[ 21.978643] i915 device info: hws_needs_physical: no <7>[ 21.978647] i915 device info: has_pooled_eu: no <7>[ 21.978652] i915 device info: cursor_needs_physical: no <7>[ 21.978656] i915 device info: has_cdclk_crawl: yes <7>[ 21.978661] i915 device info: has_cdclk_squash: yes <7>[ 21.978665] i915 device info: has_ddi: yes <7>[ 21.978670] i915 device info: has_dp_mst: yes <7>[ 21.978674] i915 device info: has_dsb: yes <7>[ 21.978678] i915 device info: has_fpga_dbg: yes <7>[ 21.978681] i915 device info: has_gmch: no <7>[ 21.978685] i915 device info: has_hotplug: yes <7>[ 21.978689] i915 device info: has_hti: no <7>[ 21.978693] i915 device info: has_ipc: yes <7>[ 21.978697] i915 device info: has_overlay: no <7>[ 21.978700] i915 device info: has_psr: yes <7>[ 21.978704] i915 device info: has_psr_hw_tracking: no <7>[ 21.978708] i915 device info: overlay_needs_physical: no <7>[ 21.978711] i915 device info: supports_tv: no <7>[ 21.978715] i915 device info: has_hdcp: yes <7>[ 21.978719] i915 device info: has_dmc: yes <7>[ 21.978723] i915 device info: has_dsc: yes <7>[ 21.978726] i915 device info: rawclk rate: 38400 kHz <7>[ 21.978521] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.978732] i915 device info: iommu: enabled <7>[ 21.978737] i915 device info: available engines: 400003 <7>[ 21.978742] i915 device info: subslice total: 8 <7>[ 21.978746] i915 device info: geometry dss mask=00000000,000000ff <7>[ 21.978751] i915 device info: compute dss mask=00000000,000000ff <7>[ 21.978755] i915 device info: EU total: 128 <7>[ 21.978758] i915 device info: EU per subslice: 16 <7>[ 21.978761] i915 device info: has slice power gating: no <7>[ 21.978764] i915 device info: has subslice power gating: no <7>[ 21.978767] i915 device info: has EU power gating: no <7>[ 21.978770] i915 device info: available engines: 41400 <7>[ 21.978774] i915 device info: subslice total: 8 <7>[ 21.978777] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 21.978780] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 21.978784] i915 device info: EU total: 128 <7>[ 21.978787] i915 device info: EU per subslice: 16 <7>[ 21.978790] i915 device info: has slice power gating: no <7>[ 21.978793] i915 device info: has subslice power gating: no <7>[ 21.978795] i915 device info: has EU power gating: no <6>[ 21.978798] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 21.978802] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 21.978805] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 21.978968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 21.980279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 21.980646] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 21.980969] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 21.981272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 21.981771] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 21.981791] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 21.981801] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 21.981862] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 21.982279] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 21.984095] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.984561] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 21.985798] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 21.986677] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 21.986737] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.986753] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 21.986787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 21.988838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 21.988943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 21.989025] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 21.989108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 21.990313] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 21.990418] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 21.990579] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 21.990662] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 21.992350] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 21.992475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 21.992638] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 21.992740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 21.994124] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 21.994253] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 21.994359] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 21.994447] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 21.995772] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 21.995879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 21.995976] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 21.996057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 21.997269] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 21.997376] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 21.997471] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 21.997557] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 21.997581] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 21.997602] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 21.997624] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 21.997646] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 21.997668] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 21.998237] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 21.998329] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 21.998354] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 21.998377] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 21.998398] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 21.998461] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 21.998825] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 21.999060] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 22.017127] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 22.021679] fbcon: i915drmfb (fb0) is primary device <7>[ 22.026660] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 22.027910] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 22.028974] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 22.029960] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 22.030938] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 22.031927] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 22.033048] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 22.034292] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 22.035348] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 22.036364] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 22.037366] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 22.038336] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 22.039278] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 22.040455] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 22.041542] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.042564] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.043473] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 22.044417] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 22.045352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 22.046389] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 22.047406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 22.048420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 22.049445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 22.050444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 22.051473] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 22.052533] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 22.053468] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 22.054454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 22.055424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 22.056395] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 22.056412] i915 0000:00:02.0: pixelformat: RGB <7>[ 22.056421] i915 0000:00:02.0: colorimetry: sRGB <7>[ 22.056430] i915 0000:00:02.0: bpc: 0 <7>[ 22.056439] i915 0000:00:02.0: dynamic range: VESA range <7>[ 22.056448] i915 0000:00:02.0: content type: Not defined <7>[ 22.056458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 22.057417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.058415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.059413] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.060397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 22.061362] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.062375] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 22.063543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 22.064578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 22.065644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 22.066649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 22.067814] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 22.069152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 22.070174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 22.071361] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.072469] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.073649] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.074791] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.075695] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.076587] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.077421] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.078551] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.080054] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.081681] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.082948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 22.084132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 22.085153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 22.085444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 22.085749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 22.086030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 22.086306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 22.086603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 22.088536] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 22.089715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 22.090180] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 22.090462] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 22.090768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 22.091046] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 22.091301] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 22.091572] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 22.091829] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 22.092080] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 22.092327] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 22.092602] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 22.092861] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 22.093116] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 22.093367] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 22.093642] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 22.093897] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 22.094144] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 22.094391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 22.094666] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 22.094927] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 22.095188] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 22.095448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 22.103241] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 22.109470] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.110988] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 22.115210] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 22.116417] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 22.117537] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 22.118576] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 22.119580] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 22.120553] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 22.121473] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 22.122425] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 22.123361] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 22.124303] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 22.125330] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 22.131684] Console: switching to colour frame buffer device 360x112 <6>[ 22.170062] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 22.186011] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 22.186193] [drm:drm_client_modeset_probe] <7>[ 22.187449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.187600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.190451] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.190904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.191761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 22.192691] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 22.193243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.193793] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.194109] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.194419] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.195036] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.195048] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.195055] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.195106] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.195401] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.196787] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.197062] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.198338] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.198458] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.198473] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.198551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.199313] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.199348] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.199379] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.199903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.199936] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.199966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.200477] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.200544] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.200583] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.201108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.201156] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.201201] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.201760] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.201794] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.201827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.202280] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.202333] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.202349] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.202361] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.202372] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.202382] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.202393] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.202404] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.202800] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.202869] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.202882] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.202895] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.202906] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 22.203007] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.226214] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 22.226334] [drm:drm_client_modeset_probe] <7>[ 22.226685] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.226756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.228826] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.229270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.230595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.230890] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.231181] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.231457] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.231980] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.231993] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.232002] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.232048] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.232459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.234159] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.234535] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.235832] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.235865] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.235877] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.235907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.236283] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.236313] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.236342] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.236740] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.236770] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.236795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.237156] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.237184] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.237213] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.237670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.237701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.237730] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.238207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.238250] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.238290] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.238888] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.238930] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.238942] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.238951] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.238960] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.238968] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.238977] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.238985] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.239075] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.239105] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.239115] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.239124] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.239133] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 22.239176] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.285700] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.286979] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.287955] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.288784] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.289581] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.290282] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.291022] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.291940] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.292795] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.293543] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.294459] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.295318] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.296231] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.297015] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.297858] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.298665] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.299542] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.300264] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.301183] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.302103] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.303032] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.303974] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.304819] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.305447] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.306130] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.306901] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.307605] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.308233] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.308996] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.309748] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.310548] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.311393] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.312194] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.313064] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.313831] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.314572] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 22.330433] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 22.339270] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 22.340771] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 22.342198] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 22.370947] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 22.371718] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 25.266308] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 25.267688] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 26.076110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 26.077848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 26.079069] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 26.080141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 26.573659] systemd-udevd (255) used greatest stack depth: 12328 bytes left <6>[ 26.587420] systemd-udevd (259) used greatest stack depth: 11216 bytes left <7>[ 27.966122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 27.967798] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 27.972630] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 510 us, max time under evasion is 250 us <7>[ 27.981875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 27.983268] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 27.984581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 33.949663] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=673 'systemd' <5>[ 34.402102] systemd-journald[210]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 34.475788] systemd-journald[210]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 35.329737] fuse: init (API version 7.38)