<5>[ 0.000000] Linux version 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Jul 9 21:17:08 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca41fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca42000-0x000000006fdb9fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdba000-0x000000006fee0fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fee1000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe16000 SMBIOS=0x6cb19000 MEMATTR=0x67f8f018 ESRT=0x67b9f198 TPMEventLog=0x67ead018 <6>[ 0.000000] efi: Remove mem284: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem286: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000388] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000390] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000392] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000393] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000396] esrt: Reserving ESRT space from 0x0000000067b9f198 to 0x0000000067b9f310. <7>[ 0.000401] e820: update [mem 0x67b9f000-0x67b9ffff] usable ==> reserved <6>[ 0.000420] Using GB pages for direct mapping <6>[ 0.001162] printk: log_buf_len: 1048576 bytes <6>[ 0.001164] printk: early log buf free: 259064(98%) <6>[ 0.001165] Secure boot disabled <6>[ 0.001167] ACPI: Early table checksum verification disabled <6>[ 0.001169] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001172] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001178] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001181] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001184] ACPI: FACS 0x000000006FDFB000 000040 <6>[ 0.001186] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001188] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001190] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001193] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001195] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001197] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001199] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001201] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001203] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001206] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001208] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001210] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001212] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001214] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001216] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001218] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001221] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001223] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001225] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001227] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001229] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001231] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001233] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001236] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001238] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001240] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001242] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001244] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001246] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001248] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001251] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001253] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001255] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001257] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001259] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001261] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001263] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001266] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001268] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001270] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001272] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001274] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001275] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001275] ACPI: Reserving FACS table memory at [mem 0x6fdfb000-0x6fdfb03f] <6>[ 0.001276] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001277] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001277] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001278] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001279] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001279] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001280] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001280] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001281] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001282] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001282] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001283] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001283] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001284] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001285] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001285] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001286] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001287] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001287] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001288] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001288] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001289] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001290] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001290] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001291] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001291] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001292] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001293] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001293] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001294] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001294] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001295] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001296] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001296] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001297] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001298] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001298] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001299] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001299] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001300] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001301] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001313] Setting APIC routing to cluster x2apic. <6>[ 0.045574] Zone ranges: <6>[ 0.045577] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045579] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045580] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045582] Movable zone start for each node <6>[ 0.045582] Early memory node ranges <6>[ 0.045583] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045584] node 0: [mem 0x0000000000100000-0x000000006ca41fff] <6>[ 0.045585] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045586] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045587] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045591] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045615] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048036] On node 0, zone DMA32: 13757 pages in unavailable ranges <6>[ 0.090181] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.090571] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.090577] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.090621] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.090624] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.090625] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.090628] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.090630] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.090638] e820: update [mem 0x67fa8000-0x67fc2fff] usable ==> reserved <6>[ 0.090644] TSC deadline timer available <6>[ 0.090645] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.090655] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.090656] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.090657] PM: hibernation: Registered nosave memory: [mem 0x67b9f000-0x67b9ffff] <6>[ 0.090658] PM: hibernation: Registered nosave memory: [mem 0x67fa8000-0x67fc2fff] <6>[ 0.090659] PM: hibernation: Registered nosave memory: [mem 0x6ca42000-0x6fdb9fff] <6>[ 0.090659] PM: hibernation: Registered nosave memory: [mem 0x6fdba000-0x6fee0fff] <6>[ 0.090660] PM: hibernation: Registered nosave memory: [mem 0x6fee1000-0x6fffefff] <6>[ 0.090661] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.090661] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.090662] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.090663] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.090664] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.090669] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.093771] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.095246] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.095250] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.095252] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.095257] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.095262] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.095274] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.095338] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.095369] random: crng init done <6>[ 0.098151] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.099537] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.099639] Built 1 zonelists, mobility grouping on. Total pages: 8177209 <6>[ 0.099642] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.099643] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.100365] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.100381] software IO TLB: area num 32. <6>[ 0.759506] Memory: 32435060K/33228676K available (16384K kernel code, 2617K rwdata, 5440K rodata, 2564K init, 21168K bss, 793360K reserved, 0K cma-reserved) <4>[ 0.759509] ********************************************************** <4>[ 0.759510] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.759510] ** ** <4>[ 0.759511] ** This system shows unhashed kernel memory addresses ** <4>[ 0.759511] ** via the console, logs, and other interfaces. This ** <4>[ 0.759512] ** might reduce the security of your system. ** <4>[ 0.759512] ** ** <4>[ 0.759513] ** If you see this message and you are not debugging ** <4>[ 0.759513] ** the kernel, report this immediately to your system ** <4>[ 0.759514] ** administrator! ** <4>[ 0.759514] ** ** <4>[ 0.759515] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.759515] ********************************************************** <6>[ 0.759683] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.760146] Dynamic Preempt: full <6>[ 0.760371] Running RCU self tests <6>[ 0.760372] Running RCU synchronous self tests <6>[ 0.760413] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.760414] rcu: RCU lockdep checking is enabled. <6>[ 0.760415] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.760415] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.760416] Trampoline variant of Tasks RCU enabled. <6>[ 0.760417] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.760418] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.760483] Running RCU synchronous self tests <6>[ 0.764325] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.764689] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.765015] Console: colour dummy device 80x25 <6>[ 0.765028] printk: console [tty1] enabled <6>[ 0.766990] printk: console [ttyS0] enabled <4>[ 2.237603] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.245272] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.249333] ... MAX_LOCK_DEPTH: 48 <4>[ 2.253482] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.257806] ... CLASSHASH_SIZE: 4096 <4>[ 2.262128] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.266533] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.271026] ... CHAINHASH_SIZE: 65536 <4>[ 2.275430] memory used by lock dependency info: 9461 kB <4>[ 2.280779] memory used for stack traces: 8320 kB <4>[ 2.285531] per task-struct memory footprint: 1920 bytes <6>[ 2.290893] ACPI: Core revision 20230331 <6>[ 2.295736] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 2.304857] APIC: Switch to symmetric I/O mode setup <6>[ 2.309836] DMAR: Host address width 42 <6>[ 2.313686] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.319020] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.327807] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.333123] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 2.341866] DMAR: SATC flags: 0x1 <6>[ 2.345202] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.351540] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.356931] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.367272] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.377271] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 2.387761] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.398190] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.399248] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.400188] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.401374] process: using mwait in idle threads <6>[ 2.402191] CET detected: Indirect Branch Tracking enabled <6>[ 2.403188] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.404187] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.405191] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.406192] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.407188] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.408192] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.409191] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.410201] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.411190] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.412188] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.413188] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.414190] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.415188] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.416188] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 2.428880] Freeing SMP alternatives memory: 36K <6>[ 2.429190] pid_max: default: 32768 minimum: 301 <6>[ 2.438674] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.440227] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.442696] Running RCU synchronous self tests <6>[ 2.443189] Running RCU synchronous self tests <6>[ 2.444355] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.445616] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.446220] Running RCU-tasks wait API self tests <6>[ 2.553200] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.554311] core: cpu_core PMU driver: <6>[ 2.555188] ... version: 5 <6>[ 2.556187] ... bit width: 48 <6>[ 2.559185] ... generic registers: 8 <6>[ 2.560188] ... value mask: 0000ffffffffffff <6>[ 2.561203] ... max period: 00007fffffffffff <6>[ 2.562189] ... fixed-purpose events: 4 <6>[ 2.563187] ... event mask: 0000000f000000ff <6>[ 2.564245] signal: max sigframe size: 3632 <6>[ 2.565205] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 2.566258] rcu: Hierarchical SRCU implementation. <6>[ 2.567188] rcu: Max phase no-delay instances is 400. <6>[ 2.570144] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.570724] smp: Bringing up secondary CPUs ... <6>[ 2.571472] smpboot: x86: Booting SMP configuration: <6>[ 2.572198] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.613357] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.613357] ... version: 5 <6>[ 1.613357] ... bit width: 48 <6>[ 1.613357] ... generic registers: 8 <6>[ 1.613357] ... value mask: 0000ffffffffffff <6>[ 1.613357] ... max period: 00007fffffffffff <6>[ 1.613357] ... fixed-purpose events: 3 <6>[ 1.613357] ... event mask: 00000007000000ff <4>[ 2.628464] #1 #3 #5 #7 #9 #11 <6>[ 2.633256] smp: Brought up 1 node, 22 CPUs <6>[ 2.635194] smpboot: Max logical packages: 1 <6>[ 2.636187] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.642362] devtmpfs: initialized <6>[ 2.644204] ACPI: PM: Registering ACPI NVS region [mem 0x6fdba000-0x6fee0fff] (1208320 bytes) <6>[ 2.645596] Running RCU synchronous self tests <6>[ 2.646202] Running RCU synchronous self tests <6>[ 2.647255] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.648200] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.649463] pinctrl core: initialized pinctrl subsystem <6>[ 2.650611] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.652307] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.652309] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.653190] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.654243] cpuidle: using governor menu <6>[ 2.656255] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.657423] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 2.658202] PCI: not using MMCONFIG <6>[ 2.659195] PCI: Using configuration type 1 for base access <4>[ 2.661425] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.663224] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.664263] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.665197] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.666193] Callback from call_rcu_tasks() invoked. <6>[ 2.666302] cryptd: max_cpu_qlen set to 1000 <6>[ 2.692112] raid6: avx2x4 gen() 54467 MB/s <6>[ 2.712969] raid6: avx2x2 gen() 53834 MB/s <6>[ 2.733970] raid6: avx2x1 gen() 53499 MB/s <6>[ 2.738188] raid6: using algorithm avx2x4 gen() 54467 MB/s <6>[ 2.759547] raid6: .... xor() 9205 MB/s, rmw enabled <6>[ 2.764189] raid6: using avx2x2 recovery algorithm <6>[ 2.769488] ACPI: Added _OSI(Module Device) <6>[ 2.774190] ACPI: Added _OSI(Processor Device) <6>[ 2.778188] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.783189] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.182481] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 3.200431] ACPI: EC: EC started <6>[ 3.204182] ACPI: EC: interrupt blocked <6>[ 3.211589] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.217190] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.493112] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 5.095714] ACPI: Interpreter enabled <6>[ 5.099318] ACPI: PM: (supports S0 S4 S5) <6>[ 5.103192] ACPI: Using IOAPIC for interrupt routing <6>[ 5.108339] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 5.148144] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 5.157209] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 5.166195] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.197061] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.197180] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.251001] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.378214] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.390531] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.413219] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.425210] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.443275] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.454827] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.466557] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.478256] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.547877] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.553488] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.558496] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 5.857237] ACPI: \_TZ_.FN00: New power resource <6>[ 5.861759] ACPI: \_TZ_.FN01: New power resource <6>[ 5.866756] ACPI: \_TZ_.FN02: New power resource <6>[ 5.871751] ACPI: \_TZ_.FN03: New power resource <6>[ 5.877774] ACPI: \_TZ_.FN04: New power resource <6>[ 5.886182] ACPI: \PIN_: New power resource <6>[ 5.892772] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 5.898202] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 5.910617] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 5.923771] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 5.939902] PCI host bridge to bus 0000:00 <6>[ 5.944192] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 5.951196] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 5.958194] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 5.965195] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 5.972194] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 5.980196] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 5.995125] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 6.001739] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 6.007206] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 6.014205] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 6.022237] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 6.027193] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 6.035240] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 6.042300] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 6.048207] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 6.056324] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 6.062214] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 6.069212] pci 0000:00:05.0: enabling Extended Tags <6>[ 6.074978] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 6.081329] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 6.091372] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 6.097433] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 6.106952] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 6.113419] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 6.122938] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 6.129208] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 6.136588] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 6.142200] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 6.149214] pci 0000:00:0a.0: enabling Extended Tags <6>[ 6.154390] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 6.160201] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 6.167206] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 6.175592] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 6.181209] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 6.188274] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 6.195716] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 6.201208] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 6.208204] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 6.215257] pci 0000:00:0d.3: supports D1 D2 <6>[ 6.220189] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 6.227350] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 6.233204] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 6.240256] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 6.248542] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 6.254207] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 6.261270] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 6.269000] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 6.275209] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 6.282205] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 6.289503] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 6.295240] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.303512] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 6.309242] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.317551] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 6.323240] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.331507] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 6.337239] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.345503] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 6.351213] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 6.358285] pci 0000:00:16.0: PME# supported from D3hot <6>[ 6.366456] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 6.372203] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 6.377196] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 6.383518] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 6.390241] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.396812] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 6.403245] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.411504] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 6.418518] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 6.424236] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 6.431247] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 6.438315] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 6.444565] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 6.451213] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 6.458219] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 6.464286] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 6.470225] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 6.477489] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 6.483217] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 6.489340] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 6.496453] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 6.502252] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 6.510113] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 6.515195] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 6.522335] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 6.527209] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 6.534210] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 6.542328] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 6.547213] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 6.554210] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 6.562231] pci_bus 0000:00: on NUMA node 0 <6>[ 9.535425] Low-power S0 idle used by default for system suspend <6>[ 9.917344] ACPI: EC: interrupt unblocked <6>[ 9.922182] ACPI: EC: event unblocked <6>[ 9.925182] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 9.930191] ACPI: EC: GPE=0x6e <6>[ 9.933190] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 9.940198] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 9.948612] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 9.956674] SCSI subsystem initialized <7>[ 9.960235] libata version 3.00 loaded. <6>[ 9.960330] ACPI: bus type USB registered <6>[ 9.964245] usbcore: registered new interface driver usbfs <6>[ 9.970222] usbcore: registered new interface driver hub <6>[ 9.975236] usbcore: registered new device driver usb <6>[ 9.980407] efivars: Registered efivars operations <6>[ 9.981305] Advanced Linux Sound Architecture Driver Initialized. <6>[ 9.982712] PCI: Using ACPI for IRQ routing <7>[ 10.000864] PCI: pci_cache_line_size set to 64 bytes <6>[ 10.001017] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 10.001345] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 10.001354] e820: reserve RAM buffer [mem 0x67b9f000-0x67ffffff] <7>[ 10.001357] e820: reserve RAM buffer [mem 0x67fa8000-0x67ffffff] <7>[ 10.001360] e820: reserve RAM buffer [mem 0x6ca42000-0x6fffffff] <7>[ 10.001363] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 10.001457] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 10.002180] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 10.002180] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 10.002191] vgaarb: loaded <6>[ 10.003346] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 10.004191] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 10.007311] clocksource: Switched to clocksource tsc-early <6>[ 10.013300] pnp: PnP ACPI init <6>[ 10.017151] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 10.023028] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 10.029414] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 10.036516] system 00:03: [io 0x06a4] has been reserved <6>[ 10.041792] system 00:03: [io 0x06a0] has been reserved <6>[ 10.065090] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 10.071658] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.078572] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.085478] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 10.092066] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 10.098973] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 10.105880] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 10.112790] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 10.123880] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 10.130797] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 10.140886] pnp: PnP ACPI: found 8 devices <6>[ 10.154911] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 10.163896] NET: Registered PF_INET protocol family <6>[ 10.169021] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.178562] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 10.187517] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 10.195201] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.203433] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 10.213546] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 10.220407] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.227945] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.235911] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 10.241552] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 10.249914] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 10.258292] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 10.264337] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 10.270380] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 10.278005] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 10.285647] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 10.293272] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 10.300900] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 10.308520] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 10.316144] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 10.322897] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 10.327827] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 10.334561] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 10.339765] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 10.345832] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 10.352579] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.360617] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 10.365819] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 10.371886] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 10.378634] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.386671] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 10.392797] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 10.398926] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 10.405742] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 10.412559] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 10.419804] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 10.426017] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 10.431541] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 10.437753] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.445252] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 10.450782] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 10.456994] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.465517] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 10.472710] PCI: CLS 0 bytes, default 64 <6>[ 10.476678] DMAR: No RMRR found <6>[ 10.479816] DMAR: No ATSR found <6>[ 10.482942] DMAR: IOMMU feature nest inconsistent <6>[ 10.482944] DMAR: IOMMU feature sc_support inconsistent <6>[ 10.487621] DMAR: dmar0: Using Queued invalidation <6>[ 10.497586] DMAR: dmar1: Using Queued invalidation <6>[ 10.503481] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 10.508824] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 10.513884] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 10.518938] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 10.523997] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 10.529076] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 10.534157] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 10.539210] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 10.544266] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 10.549333] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 10.554422] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 10.559560] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 10.564717] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 10.569889] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 10.575035] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 10.580234] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 10.585378] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 10.590514] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 10.595653] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 10.600821] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 10.605961] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 10.611128] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 10.616269] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 10.621471] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 10.626611] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 10.631753] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 10.636892] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 10.642029] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 10.647172] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 10.653029] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 10.659430] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 10.665813] software IO TLB: mapped [mem 0x00000000635c2000-0x00000000675c2000] (64MB) <6>[ 10.673968] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 10.681817] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 10.687515] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 10.693129] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 10.698743] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 10.706037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 10.715995] clocksource: Switched to clocksource tsc <6>[ 10.720998] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 10.738869] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 10.747397] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 10.755072] NET: Registered PF_ALG protocol family <6>[ 10.759841] xor: measuring software checksum speed <6>[ 10.764819] prefetch64-sse : 45035 MB/sec <6>[ 10.769381] generic_sse : 43210 MB/sec <6>[ 10.773708] xor: using function: prefetch64-sse (45035 MB/sec) <6>[ 10.779533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 10.786865] io scheduler mq-deadline registered <6>[ 10.791363] io scheduler kyber registered <6>[ 10.796743] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 10.803530] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 10.809447] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.824245] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 10.830156] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.844097] efifb: probing for efifb <6>[ 10.847678] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 10.854499] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 10.860630] efifb: scrolling: redraw <6>[ 10.864185] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 10.873783] Console: switching to colour frame buffer device 360x112 <6>[ 10.884118] fb0: EFI VGA frame buffer device <6>[ 10.889056] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 10.893918] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 10.905456] ACPI: button: Lid Switch [LID0] <6>[ 10.909786] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 10.918166] ACPI: button: Sleep Button [SLPB] <6>[ 10.922624] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 10.931439] ACPI: button: Power Button [PWRB] <6>[ 10.997746] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 11.003388] ACPI: thermal: Thermal Zone [TZ00] (37 C) <6>[ 11.008926] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 11.009742] ACPI: battery: Slot [BAT0] (battery present) <6>[ 11.020559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 11.020905] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 11.029315] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 11.040780] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 11.047842] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 11.056680] Non-volatile memory driver v1.3 <6>[ 11.060966] Linux agpgart interface v0.103 <6>[ 11.102907] ACPI: bus type drm_connector registered <6>[ 11.117679] loop: module loaded <6>[ 11.121576] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 11.122132] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.128238] nvme nvme0: pci function 0000:01:00.0 <6>[ 11.133198] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 11.146383] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.156104] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.161312] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 11.167605] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 11.168644] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.181478] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.189689] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.196865] usb usb1: Product: xHCI Host Controller <6>[ 11.201712] usb usb1: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 11.209910] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 11.215019] hub 1-0:1.0: USB hub found <6>[ 11.218814] hub 1-0:1.0: 1 port detected <6>[ 11.219862] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 11.224933] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.236126] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.236342] nvme0n1: p1 p2 <6>[ 11.243277] usb usb2: Product: xHCI Host Controller <6>[ 11.243278] usb usb2: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 11.259372] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 11.264352] hub 2-0:1.0: USB hub found <6>[ 11.268237] hub 2-0:1.0: 4 ports detected <6>[ 11.289138] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.294353] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 11.302869] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.312549] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.317754] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 11.325149] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.332301] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.340564] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.347790] usb usb3: Product: xHCI Host Controller <6>[ 11.352638] usb usb3: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 11.360900] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 11.365882] hub 3-0:1.0: USB hub found <6>[ 11.369709] hub 3-0:1.0: 12 ports detected <6>[ 11.394507] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.402795] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.410023] usb usb4: Product: xHCI Host Controller <6>[ 11.415053] usb usb4: Manufacturer: Linux 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ xhci-hcd <6>[ 11.423370] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 11.432093] hub 4-0:1.0: USB hub found <6>[ 11.436223] hub 4-0:1.0: 2 ports detected <6>[ 11.449717] usbcore: registered new interface driver usb-storage <6>[ 11.455876] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 11.462618] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 12.173769] i8042: Can't read CTR while initializing i8042 <4>[ 12.179222] i8042: probe of i8042 failed with error -5 <6>[ 12.184466] mousedev: PS/2 mouse device common for all mice <6>[ 12.190402] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 12.196389] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 12.201218] rtc_cmos rtc_cmos: setting system clock to 1998-01-08T20:07:32 UTC (884290052) <6>[ 12.209505] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 12.216480] IR JVC protocol handler initialized <6>[ 12.220984] IR MCE Keyboard/mouse protocol handler initialized <6>[ 12.226775] IR NEC protocol handler initialized <6>[ 12.231278] IR RC5(x/sz) protocol handler initialized <6>[ 12.236300] IR RC6 protocol handler initialized <6>[ 12.240802] IR SANYO protocol handler initialized <6>[ 12.246249] IR Sharp protocol handler initialized <6>[ 12.251802] IR Sony protocol handler initialized <6>[ 12.257246] IR XMP protocol handler initialized <6>[ 12.263776] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 12.273037] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 12.281380] device-mapper: uevent: version 1.0.3 <6>[ 12.286942] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 12.296128] intel_pstate: Intel P-state driver initializing <6>[ 12.306084] intel_pstate: HWP enabled <6>[ 12.312400] sdhci: Secure Digital Host Controller Interface driver <6>[ 12.320633] sdhci: Copyright(c) Pierre Ossman <6>[ 12.336194] pstore: Registered efi_pstore as persistent store backend <6>[ 12.345494] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.353901] usbcore: registered new interface driver usbhid <6>[ 12.362246] usbhid: USB HID core driver <6>[ 12.369613] pci 0000:00:08.0: Setting to D3hot <6>[ 12.388417] pci 0000:00:05.0: Setting to D3hot <6>[ 12.396783] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.407823] pci 0000:00:0b.0: Setting to D3hot <6>[ 12.423073] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 12.431509] pci 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 12.431841] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 12.432287] intel_pmc_core INT33A1:00: initialized <6>[ 12.433086] intel_rapl_msr: PL4 support detected. <6>[ 12.435999] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 12.443414] intel_rapl_common: Found RAPL domain package <6>[ 12.450248] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 12.454777] intel_rapl_common: Found RAPL domain core <6>[ 12.454789] intel_rapl_common: Found RAPL domain uncore <6>[ 12.454805] intel_rapl_common: Found RAPL domain psys <6>[ 12.534169] usb 4-1: Manufacturer: Realtek <6>[ 12.538205] Initializing XFRM netlink socket <6>[ 12.538303] usb 4-1: SerialNumber: 000001 <6>[ 12.542894] NET: Registered PF_INET6 protocol family <6>[ 12.568996] Segment Routing with IPv6 <6>[ 12.576008] In-situ OAM (IOAM) with IPv6 <6>[ 12.583522] mip6: Mobile IPv6 <6>[ 12.589689] NET: Registered PF_PACKET protocol family <6>[ 12.598016] NET: Registered PF_KEY protocol family <6>[ 12.646798] IPI shorthand broadcast: enabled <6>[ 12.656036] AVX2 version of gcm_enc/dec engaged. <6>[ 12.665768] AES CTR mode by8 optimization enabled <6>[ 12.753647] sched_clock: Marking stable (11141015522, 1612357527)->(13191865809, -438492760) <6>[ 12.768726] registered taskstats version 1 <6>[ 12.878655] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 12.917704] Btrfs loaded, zoned=no, fsverity=no <6>[ 12.927616] pstore: Using crash dump compression: deflate <6>[ 12.955555] clk: Disabling unused clocks <6>[ 12.964280] ALSA device list: <6>[ 12.972118] No soundcards found. <6>[ 12.982601] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 13.628740] EXT4-fs (nvme0n1p2): mounted filesystem fec10944-567b-487d-898f-2dff9231051e ro with ordered data mode. Quota mode: disabled. <6>[ 13.646452] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 13.661526] devtmpfs: mounted <6>[ 13.672647] Freeing unused kernel image (initmem) memory: 2564K <6>[ 13.683416] Write protecting the kernel read-only data: 22528k <6>[ 13.695988] Freeing unused kernel image (rodata/data gap) memory: 704K <6>[ 13.707148] Run /sbin/init as init process <7>[ 13.716060] with arguments: <7>[ 13.716073] /sbin/init <7>[ 13.716084] 3 <7>[ 13.716094] with environment: <7>[ 13.716104] HOME=/ <7>[ 13.716114] TERM=linux <7>[ 13.716124] BOOT_IMAGE=/boot/drm_intel <7>[ 13.989622] systemd[1]: System time before build time, advancing clock. <7>[ 14.322840] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 14.354413] systemd[1]: Detected architecture x86-64. <7>[ 14.399704] systemd[1]: Set hostname to . <6>[ 14.618079] cat (187) used greatest stack depth: 13296 bytes left <6>[ 14.627626] friendly-recove (184) used greatest stack depth: 13040 bytes left <6>[ 14.637434] mkdir (190) used greatest stack depth: 12872 bytes left <6>[ 14.683747] ls (193) used greatest stack depth: 12680 bytes left <6>[ 14.701280] systemd-cryptse (189) used greatest stack depth: 12168 bytes left <7>[ 15.607666] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 15.625536] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 15.650636] systemd[1]: Created slice system-modprobe.slice. <7>[ 15.676757] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 15.701691] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 15.726808] systemd[1]: Created slice User and Session Slice. <7>[ 15.748191] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 15.772030] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 15.789028] systemd[1]: Reached target Remote File Systems. <7>[ 15.808758] systemd[1]: Reached target Slices. <7>[ 15.827433] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 15.855143] systemd[1]: Listening on Syslog Socket. <7>[ 15.874428] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 15.897740] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 15.958823] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 15.974869] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 15.997500] systemd[1]: Listening on Journal Socket. <7>[ 16.016696] systemd[1]: Listening on udev Control Socket. <7>[ 16.036943] systemd[1]: Listening on udev Kernel Socket. <7>[ 16.085168] systemd[1]: Mounting Huge Pages File System... <7>[ 16.142619] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 16.195344] systemd[1]: Mounting Kernel Debug File System... <7>[ 16.247634] systemd[1]: Mounting Kernel Trace File System... <7>[ 16.303924] systemd[1]: Starting Journal Service... <7>[ 16.352921] systemd[1]: Starting Set the console keyboard layout... <7>[ 16.408842] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 16.432995] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 16.447542] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 16.488614] systemd[1]: Starting File System Check on Root Device... <7>[ 16.525987] systemd[1]: Starting Load Kernel Modules... <7>[ 16.559590] systemd[1]: Starting udev Coldplug all Devices... <7>[ 16.605173] systemd[1]: Starting Uncomplicated firewall... <7>[ 16.625802] systemd[1]: Started Journal Service. <6>[ 17.194700] EXT4-fs (nvme0n1p2): re-mounted fec10944-567b-487d-898f-2dff9231051e r/w. Quota mode: disabled. <6>[ 17.316341] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 17.396228] systemd-journald[212]: Received client request to flush runtime journal. <5>[ 17.410787] systemd-journald[212]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 19.097220] pps_core: LinuxPPS API ver. 1 registered <6>[ 19.097232] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 19.097423] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 19.112968] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 19.113179] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 19.116500] PTP clock support registered <6>[ 19.534019] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 19.534044] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 19.562055] usbcore: registered new device driver r8152-cfgselector <6>[ 19.572575] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 19.572586] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 19.579260] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 19.664589] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 19.664893] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 19.716086] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 19.750540] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 19.769426] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 19.778948] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 19.821646] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 19.822262] usbcore: registered new interface driver r8152 <6>[ 19.839066] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 19.839192] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 19.839326] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 19.839452] usbcore: registered new interface driver cdc_ether <6>[ 19.845337] usbcore: registered new interface driver r8153_ecm <6>[ 19.854602] e1000e 0000:00:1f.6 eno0: renamed from eth1 <6>[ 20.094237] r8152 4-1:1.0 enxe2015072f33f: renamed from eth0 <6>[ 20.321459] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <4>[ 20.518422] ********************************************************** <4>[ 20.518431] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 20.518438] ** ** <4>[ 20.518445] ** trace_printk() being used. Allocating extra memory. ** <4>[ 20.518451] ** ** <4>[ 20.518458] ** This means that this is a DEBUG kernel and it is ** <4>[ 20.518465] ** unsafe for production use. ** <4>[ 20.518471] ** ** <4>[ 20.518478] ** If you see this message and you are not debugging ** <4>[ 20.518484] ** the kernel, report this immediately to your vendor! ** <4>[ 20.518490] ** ** <4>[ 20.518497] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 20.518503] ********************************************************** <6>[ 20.755203] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 20.758511] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.758968] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 20.759416] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 20.759457] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 20.759837] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 20.760242] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 20.760687] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.761136] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 20.761786] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 20.762190] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 20.763164] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 20.763587] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 20.764802] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 20.765212] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 20.765681] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 20.767017] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 20.767544] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 20.767867] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 20.768197] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 20.772440] Console: switching to colour dummy device 80x25 <6>[ 20.779934] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 20.781019] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 20.781053] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 20.781713] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 20.782357] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 20.783007] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 20.784628] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe0d018 <7>[ 20.785325] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 20.786043] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 20.786705] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 20.787271] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 20.787852] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 20.788527] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 20.789050] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 20.789528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 20.789958] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 20.790754] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 20.791387] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 20.791975] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 20.792528] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.793058] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.793738] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 20.794291] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.794896] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.795441] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 20.795920] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.796415] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.796911] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 20.797481] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.798026] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.798562] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 20.799054] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.799705] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.800321] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 20.800995] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.801640] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.803590] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 20.804292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 20.805116] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 20.805896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 20.806608] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 20.807274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 20.808013] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 20.808734] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 20.809489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 20.810135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 20.810812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 20.811484] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 20.812115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 20.812875] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 20.813633] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 20.814344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 20.815128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 20.815782] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 20.816401] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 20.817001] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 20.817718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 20.818344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 20.819123] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 20.819914] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 20.820653] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 20.821252] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 20.821920] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 20.822602] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 20.823236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 20.823899] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 20.824538] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 20.825126] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 20.825763] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 20.826392] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 20.826928] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 20.827544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 20.828066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 20.829033] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 20.829783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 20.830679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 20.831506] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 20.832721] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 20.833661] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 20.834432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 20.834900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 20.835310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 20.835813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 20.836210] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 20.836263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 20.836790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 20.837309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 20.837778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 20.838330] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 20.842149] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 20.845323] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 20.846348] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 20.847232] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 20.847897] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 20.848488] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 20.849031] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 20.849599] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <6>[ 20.855113] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.12) <7>[ 20.881934] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 20.888840] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 20.891561] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 20.892417] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 20.893136] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 20.893773] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 20.894497] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 20.895009] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 20.895599] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 20.896052] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 20.896578] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 20.897085] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <6>[ 20.897518] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <7>[ 20.897629] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 20.898074] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 20.898586] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 20.899169] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 20.899923] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 20.900306] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 20.900691] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 20.901055] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 20.901442] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 20.901915] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 20.902521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 20.904575] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 20.905337] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 20.908245] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 20.909275] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 20.910121] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 20.911234] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 20.913195] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 20.916111] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 20.916622] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 20.926746] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 20.926784] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 20.926792] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 20.926892] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.928096] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 20.929281] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 20.929814] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 20.930247] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 20.930833] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 20.931299] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 20.931792] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 20.932277] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 20.932871] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 20.933590] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 20.934893] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 20.935694] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.937199] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.937764] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 20.938744] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 20.939930] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.940892] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 20.942276] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 20.943191] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 20.944447] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 20.945231] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 20.945904] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 20.946822] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 20.947519] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.948214] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 20.949447] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 20.950127] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.950907] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 20.953508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 20.954606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 20.955731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 20.956723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 20.957401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 20.958052] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 20.958728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 20.959413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 20.960138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 20.960793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 20.961429] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 20.962040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 20.962688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 20.963534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 20.964241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 20.964993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 20.965775] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 20.966600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 20.967332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 20.968089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 20.968827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 20.969542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 20.970170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 20.970914] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 20.971644] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 20.972271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 20.972917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 20.973630] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 20.975296] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 20.976079] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 20.977044] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 20.977985] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 20.978732] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 20.979427] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 20.980134] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 20.980847] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 20.981448] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 20.982075] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 20.982771] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 20.983697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 20.984478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 20.985124] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.985783] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.986431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.987029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.987666] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 20.988290] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 20.988902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.989477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.990012] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.992164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.992990] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 20.993706] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 20.994350] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 20.995054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 20.995673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.996206] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.996772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.997331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.998184] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 20.998827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 20.999318] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.999856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.000483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.000990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.001829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 21.002411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 21.003069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 21.003738] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 21.004270] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 21.004881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 21.005439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 21.006221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 21.006799] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 21.007392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 21.007985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 21.008612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 21.009177] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 21.009875] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 21.010837] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 21.011523] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 21.012113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 21.012673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 21.013167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 21.013681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 21.014145] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 21.014836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 21.015357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 21.015934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 21.016481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 21.017054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 21.017674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 21.018249] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 21.019167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 21.019857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 21.020496] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 21.021084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 21.021674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 21.022176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 21.022726] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 21.024149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 21.024822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 21.025516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 21.026168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 21.026963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 21.027770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 21.028446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 21.029094] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 21.029790] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 21.030459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 21.031077] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 21.031742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 21.032461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.033158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.033834] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.034600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.035219] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.035888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 21.036588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 21.037258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 21.037958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 21.038625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 21.039153] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 21.039834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 21.040436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 21.041054] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.041750] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.042503] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.043115] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.043771] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.044402] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.045010] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.045784] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.046524] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.047124] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.047920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 21.048539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 21.049055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 21.049899] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 21.050453] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.050927] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.051460] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.061546] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 21.062558] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 21.081933] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 21.112238] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 21.113200] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 21.113986] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 21.115066] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 21.115079] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 21.115089] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 21.115133] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 21.119031] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 21.120058] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 21.121022] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 21.124852] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 21.125811] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 21.128056] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 21.128852] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 21.135452] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 21.136652] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 21.137804] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 21.253520] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 21.254609] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 21.255615] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 21.256523] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 21.257277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 21.258199] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 21.259192] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 21.260015] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 21.260799] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 21.261553] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 21.262336] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 21.263115] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 21.263763] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 21.264342] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 21.266724] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <7>[ 21.279550] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2250MHz, before = 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 21.282033] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 21.285706] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 21.285725] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 21.287009] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 21.311190] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 21.311270] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 21.313823] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 21.314490] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 21.315857] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 21.316226] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 21.317142] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 21.317632] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 21.321795] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 21.323159] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 21.324060] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <6>[ 21.365189] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 21.440002] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 21.441041] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 21.442125] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 21.442979] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 21.443759] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 21.444430] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 21.445165] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 21.445855] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 21.446564] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 21.447244] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 21.447944] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 21.448728] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 21.449478] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 21.450069] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 21.450722] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 21.452553] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <6>[ 21.452570] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.0 <7>[ 21.471463] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 16ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 21.472775] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 21.482405] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 21.483682] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 21.483702] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 21.484114] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 21.492454] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 21.493718] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 21.494767] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 21.495718] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 21.496401] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 21.496951] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 21.497477] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 21.498015] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 21.498652] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 21.499303] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 21.499936] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 21.500646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 21.501347] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 21.502026] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 21.502799] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 21.503478] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 21.504243] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 21.504961] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 21.505628] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.506221] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.506875] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.507589] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.508168] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.508799] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.509472] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.510071] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.510713] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.511290] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.511934] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.512533] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.513084] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.513602] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.514110] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.514722] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.515275] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.515882] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.516470] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.517027] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.517624] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.518195] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.518739] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.519219] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 21.519863] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 21.519876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 21.520615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 21.521306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 21.522043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 21.522745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 21.523340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 21.523993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 21.524632] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 21.525133] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 21.525642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 21.526074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 21.526511] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 21.526519] i915 0000:00:02.0: pixelformat: RGB <7>[ 21.526525] i915 0000:00:02.0: colorimetry: sRGB <7>[ 21.526531] i915 0000:00:02.0: bpc: 0 <7>[ 21.526537] i915 0000:00:02.0: dynamic range: VESA range <7>[ 21.526542] i915 0000:00:02.0: content type: Not defined <7>[ 21.526548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 21.527017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.527558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.528062] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.528616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.529168] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.529757] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 21.530292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 21.530884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 21.531445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 21.532044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 21.532638] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 21.533436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 21.534064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 21.534647] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.535183] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.535760] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.536394] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.536988] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.537603] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.538139] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.538704] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.539221] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.539814] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.540382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 21.540995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 21.541630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 21.542152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 21.542720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 21.543256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 21.546950] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 21.752685] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 21.755474] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 21.772093] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 21.773013] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 21.774043] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 21.824530] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.825939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 21.827971] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 21.828749] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 21.829273] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 21.829724] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 21.830145] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 21.830572] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 21.830949] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 21.831318] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 21.831700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 21.832070] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 21.832456] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 21.832820] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 21.833164] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 21.833518] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 21.833858] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 21.834200] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 21.834554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 21.834900] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 21.835265] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 21.835649] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 21.836022] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 21.836400] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 21.836765] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 21.837170] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.837779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 21.839546] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 21.839954] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 21.840413] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <6>[ 21.867664] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <6>[ 22.386581] r8152 4-1:1.0 enxe2015072f33f: carrier on <7>[ 22.440700] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 22.442027] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 22.443025] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 22.444358] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 22.645426] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 22.649612] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 22.651120] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 22.654468] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 22.655188] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 22.656654] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 22.658662] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 22.659462] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 22.661356] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 22.661790] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 22.664170] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 22.664491] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 22.665450] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 22.666616] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 22.667048] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 22.667740] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 22.677726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 22.679834] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.681040] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 22.684799] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 22.686021] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 22.687164] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 22.688194] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 22.689148] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 22.690052] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 22.690956] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 22.691957] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 22.692964] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 22.693978] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 22.695082] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 22.696210] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 22.698565] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 22.701655] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 22.702771] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 22.703868] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 22.704914] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 22.705969] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 22.707152] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 22.711465] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 22.712458] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 22.713302] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 22.714230] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 22.715094] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 22.715920] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 22.754810] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 22.756537] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 22.761227] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 22.763180] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 22.766466] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 22.768015] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 22.770318] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 22.773692] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 22.775219] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 22.776867] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 22.780002] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 22.781782] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 22.785048] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 22.785271] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 22.799527] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 22.895776] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 22.921132] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 22.931036] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 22.932191] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 22.933299] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 22.936175] [drm:drm_client_modeset_probe] <7>[ 22.936013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 22.936883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 22.937412] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.937346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 22.937578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.938079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 22.940711] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 22.941324] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 22.941335] i915 device info: graphics version: 12.71 <7>[ 22.941343] i915 device info: media version: 13 <7>[ 22.941348] i915 device info: display version: 14 <7>[ 22.941353] i915 device info: graphics stepping: B0 <7>[ 22.941357] i915 device info: media stepping: C0 <7>[ 22.941388] i915 device info: display stepping: C0 <7>[ 22.941395] i915 device info: base die stepping: ** <7>[ 22.941399] i915 device info: gt: 0 <7>[ 22.941404] i915 device info: memory-regions: 0x41 <7>[ 22.941409] i915 device info: page-sizes: 0x211000 <7>[ 22.941414] i915 device info: platform: METEORLAKE <7>[ 22.941418] i915 device info: ppgtt-size: 48 <7>[ 22.941422] i915 device info: ppgtt-type: 2 <7>[ 22.941427] i915 device info: dma_mask_size: 46 <7>[ 22.941431] i915 device info: is_mobile: no <7>[ 22.941436] i915 device info: is_lp: no <7>[ 22.941440] i915 device info: require_force_probe: yes <7>[ 22.941446] i915 device info: is_dgfx: no <7>[ 22.941451] i915 device info: has_64bit_reloc: yes <7>[ 22.941456] i915 device info: has_64k_pages: no <7>[ 22.941461] i915 device info: gpu_reset_clobbers_display: no <7>[ 22.941466] i915 device info: has_reset_engine: yes <7>[ 22.941470] i915 device info: has_3d_pipeline: yes <7>[ 22.941474] i915 device info: has_4tile: yes <7>[ 22.941478] i915 device info: has_flat_ccs: no <7>[ 22.941483] i915 device info: has_global_mocs: yes <7>[ 22.941487] i915 device info: has_gmd_id: yes <7>[ 22.941492] i915 device info: has_gt_uc: yes <7>[ 22.941496] i915 device info: has_heci_pxp: no <7>[ 22.941501] i915 device info: has_heci_gscfi: no <7>[ 22.941506] i915 device info: has_guc_deprivilege: yes <7>[ 22.941511] i915 device info: has_l3_ccs_read: no <7>[ 22.941515] i915 device info: has_l3_dpf: no <7>[ 22.941519] i915 device info: has_llc: no <7>[ 22.941523] i915 device info: has_logical_ring_contexts: yes <7>[ 22.941527] i915 device info: has_logical_ring_elsq: yes <7>[ 22.941532] i915 device info: has_media_ratio_mode: no <7>[ 22.941536] i915 device info: has_mslice_steering: no <7>[ 22.941541] i915 device info: has_oa_bpc_reporting: yes <7>[ 22.941546] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 22.941551] i915 device info: has_oam: yes <7>[ 22.941556] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 22.941560] i915 device info: has_pxp: yes <7>[ 22.941564] i915 device info: has_rc6: yes <7>[ 22.941568] i915 device info: has_rc6p: no <7>[ 22.941573] i915 device info: has_rps: yes <7>[ 22.941577] i915 device info: has_runtime_pm: yes <7>[ 22.941582] i915 device info: has_snoop: yes <7>[ 22.941587] i915 device info: has_coherent_ggtt: no <7>[ 22.941592] i915 device info: tuning_thread_rr_after_dep: no <7>[ 22.941596] i915 device info: unfenced_needs_alignment: no <7>[ 22.941600] i915 device info: hws_needs_physical: no <7>[ 22.941604] i915 device info: has_pooled_eu: no <7>[ 22.941608] i915 device info: cursor_needs_physical: no <7>[ 22.941615] i915 device info: has_cdclk_crawl: yes <7>[ 22.941622] i915 device info: has_cdclk_squash: yes <7>[ 22.941628] i915 device info: has_ddi: yes <7>[ 22.941633] i915 device info: has_dp_mst: yes <7>[ 22.941638] i915 device info: has_dsb: yes <7>[ 22.941642] i915 device info: has_fpga_dbg: yes <7>[ 22.941648] i915 device info: has_gmch: no <7>[ 22.941653] i915 device info: has_hotplug: yes <7>[ 22.941657] i915 device info: has_hti: no <7>[ 22.941661] i915 device info: has_ipc: yes <7>[ 22.941665] i915 device info: has_overlay: no <7>[ 22.941671] i915 device info: has_psr: yes <7>[ 22.941678] i915 device info: has_psr_hw_tracking: no <7>[ 22.941687] i915 device info: overlay_needs_physical: no <7>[ 22.941695] i915 device info: supports_tv: no <7>[ 22.941702] i915 device info: has_hdcp: yes <7>[ 22.941707] i915 device info: has_dmc: yes <7>[ 22.941712] i915 device info: has_dsc: yes <7>[ 22.941716] i915 device info: rawclk rate: 38400 kHz <7>[ 22.941721] i915 device info: iommu: enabled <7>[ 22.941726] i915 device info: available engines: 400003 <7>[ 22.941732] i915 device info: subslice total: 8 <7>[ 22.941738] i915 device info: geometry dss mask=00000000,000000ff <7>[ 22.941744] i915 device info: compute dss mask=00000000,000000ff <7>[ 22.941749] i915 device info: EU total: 128 <7>[ 22.941753] i915 device info: EU per subslice: 16 <7>[ 22.941758] i915 device info: has slice power gating: no <7>[ 22.941762] i915 device info: has subslice power gating: no <7>[ 22.941767] i915 device info: has EU power gating: no <7>[ 22.941772] i915 device info: available engines: 41400 <7>[ 22.941778] i915 device info: subslice total: 8 <7>[ 22.941783] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 22.941788] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 22.941792] i915 device info: EU total: 128 <7>[ 22.941796] i915 device info: EU per subslice: 16 <7>[ 22.941800] i915 device info: has slice power gating: no <7>[ 22.941805] i915 device info: has subslice power gating: no <7>[ 22.941809] i915 device info: has EU power gating: no <6>[ 22.941815] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 22.941820] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 22.941824] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 22.941729] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.942199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.943501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.943856] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.944191] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.944560] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.945398] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.945427] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.945447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.945577] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.946220] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.948414] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.948890] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.950254] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 22.951177] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.951214] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.951229] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.951262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.952157] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 22.952236] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.952309] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.952399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.953410] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 22.953521] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.953620] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.953698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.955072] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 22.955204] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.955321] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.955467] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.956713] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 22.956814] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.956909] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.957004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.958424] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 22.958573] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.958696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.958798] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.959964] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 22.960068] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.960160] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.960190] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.960212] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.960233] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.960254] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.960274] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.960294] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.960739] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.960829] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.960854] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.960878] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.960899] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 22.960976] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.961276] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 22.961548] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 22.979852] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 22.983600] fbcon: i915drmfb (fb0) is primary device <7>[ 22.988594] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 22.989837] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 22.990919] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 22.991890] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 22.992853] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 22.993799] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 22.994920] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 22.996153] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 22.997199] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 22.998170] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 22.999277] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 23.000492] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 23.001228] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 23.002041] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 23.002829] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 23.003513] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 23.004164] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 23.004636] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 23.005169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 23.005673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 23.006088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 23.006497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 23.006922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 23.007452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 23.007792] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 23.008078] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 23.008392] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 23.008683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 23.008965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 23.009242] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 23.009247] i915 0000:00:02.0: pixelformat: RGB <7>[ 23.009251] i915 0000:00:02.0: colorimetry: sRGB <7>[ 23.009255] i915 0000:00:02.0: bpc: 0 <7>[ 23.009258] i915 0000:00:02.0: dynamic range: VESA range <7>[ 23.009261] i915 0000:00:02.0: content type: Not defined <7>[ 23.009265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 23.009574] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.009858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.010134] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 23.010428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 23.010706] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 23.010980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 23.011247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 23.011532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 23.011807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 23.012077] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 23.012344] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 23.012660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 23.012948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 23.013220] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 23.013523] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.013802] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.014073] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.014347] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 23.014643] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 23.014918] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.015192] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.015487] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.015774] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 23.016055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 23.016343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 23.016636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 23.016917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 23.017189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 23.017487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 23.017772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 23.018056] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 23.021081] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 23.022438] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 23.022910] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 23.023200] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 23.023509] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 23.023792] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 23.024049] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 23.024311] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 23.024590] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 23.024846] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 23.025100] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 23.025350] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 23.025618] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 23.025874] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 23.026123] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 23.026400] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 23.026656] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 23.026907] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 23.027159] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 23.027433] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 23.027693] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 23.027998] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 23.028290] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 23.033243] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 23.039690] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.041192] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 23.045349] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 23.046532] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 23.047610] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 23.048629] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 23.049596] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 23.050584] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 23.051538] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 23.052471] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 23.053350] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 23.054277] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 23.055273] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 23.061515] Console: switching to colour frame buffer device 360x112 <6>[ 23.105343] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 23.111911] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 23.112059] [drm:drm_client_modeset_probe] <7>[ 23.113040] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.113185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.116737] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.117209] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.118400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 23.119074] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 23.119516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.120012] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.120550] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.121001] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.121790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.121814] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.121830] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.121912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.122441] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.124006] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.124453] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.126067] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.126157] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.126176] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.126287] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.127544] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.127624] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.127691] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.128343] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.128424] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.128473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.129264] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.129312] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.129354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.130007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.130068] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.130128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.130879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.130920] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.130959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.131502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.131536] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.131548] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.131555] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.131562] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.131569] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.131576] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.131583] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.131788] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.131828] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.131837] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.131845] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.131852] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 23.131949] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.152185] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 286 us, max time under evasion is 250 us <7>[ 23.156206] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 23.156413] [drm:drm_client_modeset_probe] <7>[ 23.156576] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.156652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.158803] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.159283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.160642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.161025] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.161398] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.161710] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.162065] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.162077] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.162083] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.162117] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.162445] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.163918] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.164333] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.165696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.165728] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.165740] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.165771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.166108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.166139] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.166168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.166537] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.166565] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.166591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.166926] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.166954] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.166980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.167333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.167388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.167418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.167812] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.167842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.167872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.168438] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.168484] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.168497] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.168507] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.168518] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.168528] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.168537] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.168547] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.168655] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.168694] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.168706] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.168718] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.168730] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 23.168781] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.212210] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.213477] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.214471] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.215820] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.216934] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.217785] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.218601] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.219391] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.220162] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.221194] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.222065] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.222812] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.223624] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.224535] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.225290] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.226247] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.227563] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.228289] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.229224] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.230154] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.231529] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.232313] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.233196] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.234077] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.234895] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.235805] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.236633] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.237336] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.238260] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.239183] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.240661] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.241847] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.242832] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.243905] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.244669] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.245251] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 23.260439] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 23.263693] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 23.268824] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 23.271320] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 23.305599] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 23.306450] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 26.218286] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 26.219593] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 26.924299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 26.926000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 26.927311] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 26.928492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 27.514769] systemd-udevd (261) used greatest stack depth: 11832 bytes left <6>[ 27.532472] systemd-udevd (317) used greatest stack depth: 11216 bytes left <7>[ 28.742944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 28.744537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 28.750062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 28.751495] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 28.752718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 34.787274] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=672 'systemd' <5>[ 35.243727] systemd-journald[212]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 35.318041] systemd-journald[212]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 36.114837] fuse: init (API version 7.38)