igt@i915_selftest@live@workarounds on fi-skl-guc@linus-v6.5-rc1 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gd1574543b (x86_64) (Linux: 6.5.0-rc1-linus-v6.5-rc1-g06c2afb862f9+ x86_64)
Out	Starting dynamic subtest: workarounds Dynamic subtest workarounds: SUCCESS (0.692s)
Err	Starting dynamic subtest: workarounds Dynamic subtest workarounds: SUCCESS (0.692s)
Dmesg	<6> [220.263738] [IGT] i915_selftest: starting dynamic subtest workarounds <5> [220.362161] Setting dangerous option enable_guc - tainting kernel <5> [220.362170] Setting dangerous option live_selftests - tainting kernel <7> [220.395702] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [220.395930] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [220.396099] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [220.396109] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [220.396291] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [220.396581] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [220.396770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [220.397471] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [220.397650] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [220.397823] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [220.397996] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [220.398003] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [220.398614] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [220.398638] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [220.398842] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [220.399300] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018 <7> [220.399507] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [220.399718] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [220.399926] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [220.400133] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [220.404210] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [220.404433] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [220.404643] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [220.404853] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [220.405063] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [220.405229] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [220.405404] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [220.405564] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [220.405725] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [220.405884] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [220.406043] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [220.406202] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [220.406369] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [220.406528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [220.407050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [220.407288] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [220.407514] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [220.407741] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [220.407966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [220.408191] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [220.408427] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [220.408652] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [220.408847] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [220.409055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [220.409294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [220.409519] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [220.409738] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [220.409957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [220.410174] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [220.410409] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [220.410634] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [220.410856] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [220.411080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [220.411303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [220.411483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [220.411703] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [220.411923] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [220.412143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [220.412373] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [220.412592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [220.412811] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [220.413030] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [220.413277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [220.413551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [220.413793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [220.413980] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [220.414207] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [220.414438] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [220.414659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [220.414939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.415126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.415357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [220.415591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.415858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [220.416080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [220.416313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [220.416535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [220.416797] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <6> [220.417734] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <7> [220.417738] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <6> [220.417971] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [220.418136] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [220.418376] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [220.418594] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [220.418805] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [220.419016] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [220.419173] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [220.419331] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [220.419477] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [220.419621] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [220.419765] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [220.421097] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [220.422231] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [220.422422] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not present <7> [220.422620] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [220.422844] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [220.423050] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [220.423454] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:103:DDI C/PHY C] using AUX C (platform default) <7> [220.423626] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C] <7> [220.423793] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [220.424001] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] using AUX D (VBT) <7> [220.424218] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D] <7> [220.424693] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [220.424880] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D] <7> [220.425024] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [220.425233] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] using AUX A (VBT) <7> [220.425415] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E] <7> [220.425625] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [220.426032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [220.426207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [220.426407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [220.426564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [220.426731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [220.426885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [220.427038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [220.427190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [220.427358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [220.427520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [220.427673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [220.427825] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [220.427979] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [220.428131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A <7> [220.428303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A <7> [220.428460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [220.428607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [220.428754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [220.428906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A <7> [220.429061] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [220.429220] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [220.429408] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [220.429574] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [220.429768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [220.429930] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled <7> [220.430089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled <7> [220.430266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled <7> [220.430434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled <7> [220.430582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [220.430730] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [220.430877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [220.431024] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [220.431182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [220.431377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [220.431530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [220.431678] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [220.431837] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [220.431988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [220.432136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [220.432299] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [220.432502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [220.432660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [220.432815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [220.432968] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [220.433123] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [220.433299] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [220.433458] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [220.435514] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K) <7> [220.435661] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [220.435785] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [220.435920] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [220.436065] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [220.437065] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [220.437215] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [220.437380] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0 <7> [220.439788] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [220.439977] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [220.440153] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [220.460090] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f <7> [220.460280] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [220.460431] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [220.460578] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [220.460725] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2 <7> [220.460871] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006 <7> [220.461017] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [220.461163] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [220.461319] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [220.461485] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [220.461632] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [220.461779] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [220.461924] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [220.462069] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [220.462216] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [220.463378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [220.463382] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [220.469292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [220.469744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [220.469917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [220.469920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [220.477919] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [220.478189] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [220.478359] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [220.478518] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [220.478662] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [220.478822] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [220.479298] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [220.479424] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [220.479537] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [220.479648] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [220.481576] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [220.481857] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event <7> [220.482122] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [220.482786] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event <7> [220.483170] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event <7> [220.483522] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [220.484084] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event <6> [220.484127] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [220.485823] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [220.499034] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [220.499801] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input62 <7> [220.500424] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [220.500896] [drm:drm_client_modeset_probe] <7> [220.500950] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [220.500898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [220.500977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [220.501257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [220.501164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [220.501288] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [220.501396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [220.501598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [220.501822] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [220.501843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [220.502054] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected <7> [220.502140] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected <7> [220.502161] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [220.502181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [220.502281] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [220.502497] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9 <7> [220.502501] i915 device info: graphics version: 9 <7> [220.502504] i915 device info: media version: 9 <7> [220.502506] i915 device info: display version: 9 <7> [220.502509] i915 device info: graphics stepping: G0 <7> [220.502511] i915 device info: media stepping: G0 <7> [220.502514] i915 device info: display stepping: G0 <7> [220.502516] i915 device info: base die stepping: ** <7> [220.502518] i915 device info: gt: 2 <7> [220.502521] i915 device info: memory-regions: 0x21 <7> [220.502523] i915 device info: page-sizes: 0x11000 <7> [220.502526] i915 device info: platform: SKYLAKE <7> [220.502528] i915 device info: ppgtt-size: 48 <7> [220.502531] i915 device info: ppgtt-type: 2 <7> [220.502533] i915 device info: dma_mask_size: 39 <7> [220.502535] i915 device info: is_mobile: no <7> [220.502538] i915 device info: is_lp: no <7> [220.502540] i915 device info: require_force_probe: no <7> [220.502543] i915 device info: is_dgfx: no <7> [220.502545] i915 device info: has_64bit_reloc: yes <7> [220.502548] i915 device info: has_64k_pages: no <7> [220.502550] i915 device info: gpu_reset_clobbers_display: no <7> [220.502553] i915 device info: has_reset_engine: yes <7> [220.502555] i915 device info: has_3d_pipeline: yes <7> [220.502557] i915 device info: has_4tile: no <7> [220.502560] i915 device info: has_flat_ccs: no <7> [220.502562] i915 device info: has_global_mocs: no <7> [220.502565] i915 device info: has_gmd_id: no <7> [220.502567] i915 device info: has_gt_uc: yes <7> [220.502570] i915 device info: has_heci_pxp: no <7> [220.502572] i915 device info: has_heci_gscfi: no <7> [220.502575] i915 device info: has_guc_deprivilege: no <7> [220.502578] i915 device info: has_l3_ccs_read: no <7> [220.502580] i915 device info: has_l3_dpf: no <7> [220.502582] i915 device info: has_llc: yes <7> [220.502576] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] status updated from unknown to disconnected <7> [220.502585] i915 device info: has_logical_ring_contexts: yes <7> [220.502587] i915 device info: has_logical_ring_elsq: no <7> [220.502589] i915 device info: has_media_ratio_mode: no <7> [220.502591] i915 device info: has_mslice_steering: no <7> [220.502597] i915 device info: has_oa_bpc_reporting: no <7> [220.502600] i915 device info: has_oa_slice_contrib_limits: no <7> [220.502602] i915 device info: has_oam: no <7> [220.502605] i915 device info: has_one_eu_per_fuse_bit: no <7> [220.502608] i915 device info: has_pxp: no <7> [220.502610] i915 device info: has_rc6: yes <7> [220.502605] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [220.502612] i915 device info: has_rc6p: no <7> [220.502614] i915 device info: has_rps: yes <7> [220.502616] i915 device info: has_runtime_pm: yes <7> [220.502619] i915 device info: has_snoop: no <7> [220.502623] i915 device info: has_coherent_ggtt: yes <7> [220.502626] i915 device info: tuning_thread_rr_after_dep: no <7> [220.502628] i915 device info: unfenced_needs_alignment: no <7> [220.502631] i915 device info: hws_needs_physical: no <7> [220.502633] i915 device info: has_pooled_eu: no <7> [220.502628] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [220.502636] i915 device info: cursor_needs_physical: no <7> [220.502638] i915 device info: has_cdclk_crawl: no <7> [220.502640] i915 device info: has_cdclk_squash: no <7> [220.502642] i915 device info: has_ddi: yes <7> [220.502646] i915 device info: has_dp_mst: yes <7> [220.502648] i915 device info: has_dsb: no <7> [220.502651] i915 device info: has_fpga_dbg: yes <7> [220.502653] i915 device info: has_gmch: no <7> [220.502656] i915 device info: has_hotplug: yes <7> [220.502658] i915 device info: has_hti: no <7> [220.502661] i915 device info: has_ipc: yes <7> [220.502663] i915 device info: has_overlay: no <7> [220.502666] i915 device info: has_psr: yes <7> [220.502668] i915 device info: has_psr_hw_tracking: yes <7> [220.502671] i915 device info: overlay_needs_physical: no <7> [220.502673] i915 device info: supports_tv: no <7> [220.502676] i915 device info: has_hdcp: yes <7> [220.502678] i915 device info: has_dmc: yes <7> [220.502681] i915 device info: has_dsc: no <7> [220.502683] i915 device info: rawclk rate: 24000 kHz <7> [220.502686] i915 device info: iommu: enabled <7> [220.502689] i915 device info: available engines: 40403 <7> [220.502691] i915 device info: slice total: 1, mask=0001 <7> [220.502694] i915 device info: subslice total: 3 <7> [220.502697] i915 device info: slice0: 3 subslices, mask=00000007 <7> [220.502700] i915 device info: slice1: 0 subslices, mask=00000000 <7> [220.502703] i915 device info: slice2: 0 subslices, mask=00000000 <7> [220.502705] i915 device info: EU total: 24 <7> [220.502707] i915 device info: EU per subslice: 8 <7> [220.502709] i915 device info: has slice power gating: no <7> [220.502711] i915 device info: has subslice power gating: no <7> [220.502713] i915 device info: has EU power gating: yes <6> [220.502716] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [220.502718] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [220.502720] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [220.502724] i915: Performing live selftests with st_random_seed=0x7001511e st_timeout=500 <6> [220.502728] i915: Running workarounds <6> [220.502750] i915: Running intel_workarounds_live_selftests/live_dirty_whitelist <7> [220.502651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [220.502858] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected <7> [220.502886] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [220.502911] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [220.502930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [220.503139] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to disconnected <7> [220.503167] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [220.503191] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [220.503199] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [220.503204] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [220.503210] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [220.503214] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [220.503219] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [220.503273] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [220.503286] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [220.503308] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [220.503332] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [220.504354] [drm:drm_client_modeset_probe] <7> [220.504683] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [220.504736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [220.505038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [220.505059] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [220.505131] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [220.505349] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected <7> [220.505369] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [220.505388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [220.505660] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [220.505680] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [220.505700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [220.505910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [220.505930] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [220.505949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [220.506154] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [220.506173] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [220.506207] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [220.506212] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [220.506217] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [220.506222] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [220.506227] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [220.506677] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [220.506774] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [220.506809] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [220.506843] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [220.506914] [drm:drm_client_modeset_probe] <7> [220.506963] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [220.506984] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [220.507174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [220.507190] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [220.507205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [220.507517] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected <7> [220.507538] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [220.507555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [220.507736] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [220.507756] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [220.507775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [220.508000] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [220.508021] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [220.508041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [220.508268] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [220.508288] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [220.508294] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [220.508300] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [220.508305] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [220.508310] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [220.508314] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [220.508347] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [220.508360] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [220.508381] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [220.508403] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [220.534406] i915: Running intel_workarounds_live_selftests/live_reset_whitelist <6> [220.534412] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [engine] <5> [220.536973] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds <6> [220.538052] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [device] <5> [220.540219] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds <6> [220.541113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [220.541119] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [220.543458] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [220.544114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [220.544361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [220.544365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [220.567365] i915: Running intel_workarounds_live_selftests/live_isolated_whitelist <6> [220.586369] i915: Running intel_workarounds_live_selftests/live_gpu_reset_workarounds <6> [220.586378] Verifying after GPU reset... <7> [220.586384] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [220.586576] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT_REF workarounds on global <7> [220.586729] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0 <7> [220.586880] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 CTX_REF workarounds on rcs0 <5> [220.588046] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds <6> [220.588211] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [220.588215] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [220.590319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [220.590559] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [220.590724] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [220.590727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [220.620352] i915: Running intel_workarounds_live_selftests/live_engine_reset_workarounds <7> [220.620365] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [220.620534] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT_REF workarounds on global <7> [220.620688] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0 <7> [220.620839] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 CTX_REF workarounds on rcs0 <6> [220.620977] Verifying after rcs0 reset... <5> [220.622329] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:idle <5> [220.624317] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:active <6> [220.625215] Verifying after bcs0 reset... <5> [220.628129] i915 0000:00:02.0: [drm] Resetting bcs0 for live_workarounds:active <6> [220.629096] Verifying after vcs0 reset... <5> [220.631528] i915 0000:00:02.0: [drm] Resetting vcs0 for live_workarounds:active <6> [220.632335] Verifying after vecs0 reset... <5> [220.634606] i915 0000:00:02.0: [drm] Resetting vecs0 for live_workarounds:active <7> [220.637483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.656353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.656590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [220.656748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [220.656903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [220.657057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [220.677447] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [220.720002] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [220.758678] i915: probe of 0000:00:02.0 failed with error -25 <6> [220.956127] [IGT] i915_selftest: finished subtest workarounds, SUCCESS

<6> [220.263738] [IGT] i915_selftest: starting dynamic subtest workarounds

<5> [220.362161] Setting dangerous option enable_guc - tainting kernel

<5> [220.362170] Setting dangerous option live_selftests - tainting kernel

<7> [220.395702] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [220.395930] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [220.396099] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [220.396109] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [220.396291] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [220.396581] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [220.396770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [220.397471] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [220.397650] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [220.397823] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [220.397996] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [220.398003] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [220.398614] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [220.398638] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [220.398842] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [220.399300] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018

<7> [220.399507] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [220.399718] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [220.399926] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [220.400133] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [220.404210] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [220.404433] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [220.404643] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [220.404853] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [220.405063] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [220.405229] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [220.405404] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [220.405564] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [220.405725] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [220.405884] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [220.406043] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [220.406202] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [220.406369] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [220.406528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [220.407050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [220.407288] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [220.407514] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [220.407741] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [220.407966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [220.408191] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [220.408427] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [220.408652] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [220.408847] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [220.409055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [220.409294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [220.409519] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [220.409738] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [220.409957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [220.410174] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [220.410409] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [220.410634] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [220.410856] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [220.411080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [220.411303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [220.411483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [220.411703] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [220.411923] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [220.412143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [220.412373] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [220.412592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [220.412811] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [220.413030] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [220.413277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [220.413551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [220.413793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [220.413980] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [220.414207] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [220.414438] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [220.414659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [220.414939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.415126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.415357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [220.415591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.415858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [220.416080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [220.416313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [220.416535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [220.416797] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<6> [220.417734] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<7> [220.417738] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<6> [220.417971] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [220.418136] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [220.418376] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [220.418594] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [220.418805] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [220.419016] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [220.419173] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [220.419331] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [220.419477] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [220.419621] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [220.419765] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [220.421097] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [220.422231] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [220.422422] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not present

<7> [220.422620] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [220.422844] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [220.423050] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [220.423454] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:103:DDI C/PHY C] using AUX C (platform default)

<7> [220.423626] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C]

<7> [220.423793] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [220.424001] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] using AUX D (VBT)

<7> [220.424218] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D]

<7> [220.424693] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [220.424880] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D]

<7> [220.425024] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [220.425233] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] using AUX A (VBT)

<7> [220.425415] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E]

<7> [220.425625] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [220.426032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [220.426207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [220.426407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [220.426564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [220.426731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [220.426885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [220.427038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [220.427190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [220.427358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [220.427520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [220.427673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [220.427825] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [220.427979] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [220.428131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [220.428303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [220.428460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [220.428607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [220.428754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [220.428906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [220.429061] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [220.429220] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [220.429408] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [220.429574] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [220.429768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [220.429930] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled

<7> [220.430089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled

<7> [220.430266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled

<7> [220.430434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled

<7> [220.430582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [220.430730] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [220.430877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [220.431024] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [220.431182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [220.431377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [220.431530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [220.431678] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [220.431837] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [220.431988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [220.432136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [220.432299] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [220.432502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [220.432660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [220.432815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [220.432968] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [220.433123] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [220.433299] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [220.433458] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [220.435514] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K)

<7> [220.435661] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [220.435785] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [220.435920] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [220.436065] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [220.437065] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [220.437215] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [220.437380] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0

<7> [220.439788] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [220.439977] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [220.440153] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [220.460090] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f

<7> [220.460280] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [220.460431] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [220.460578] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [220.460725] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2

<7> [220.460871] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006

<7> [220.461017] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [220.461163] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [220.461319] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [220.461485] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [220.461632] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [220.461779] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [220.461924] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [220.462069] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [220.462216] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [220.463378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [220.463382] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [220.469292] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [220.469744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [220.469917] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [220.469920] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [220.477919] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [220.478189] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [220.478359] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [220.478518] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [220.478662] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [220.478822] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [220.479298] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [220.479424] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [220.479537] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [220.479648] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [220.481576] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [220.481857] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event

<7> [220.482122] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [220.482786] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event

<7> [220.483170] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event

<7> [220.483522] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [220.484084] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event

<6> [220.484127] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [220.485823] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [220.499034] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [220.499801] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input62

<7> [220.500424] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [220.500896] [drm:drm_client_modeset_probe]

<7> [220.500950] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [220.500898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [220.500977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [220.501257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [220.501164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [220.501288] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [220.501396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [220.501598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [220.501822] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [220.501843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [220.502054] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected

<7> [220.502140] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [220.502161] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [220.502181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [220.502281] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [220.502497] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9

<7> [220.502501] i915 device info: graphics version: 9

<7> [220.502504] i915 device info: media version: 9

<7> [220.502506] i915 device info: display version: 9

<7> [220.502509] i915 device info: graphics stepping: G0

<7> [220.502511] i915 device info: media stepping: G0

<7> [220.502514] i915 device info: display stepping: G0

<7> [220.502516] i915 device info: base die stepping: **

<7> [220.502518] i915 device info: gt: 2

<7> [220.502521] i915 device info: memory-regions: 0x21

<7> [220.502523] i915 device info: page-sizes: 0x11000

<7> [220.502526] i915 device info: platform: SKYLAKE

<7> [220.502528] i915 device info: ppgtt-size: 48

<7> [220.502531] i915 device info: ppgtt-type: 2

<7> [220.502533] i915 device info: dma_mask_size: 39

<7> [220.502535] i915 device info: is_mobile: no

<7> [220.502538] i915 device info: is_lp: no

<7> [220.502540] i915 device info: require_force_probe: no

<7> [220.502543] i915 device info: is_dgfx: no

<7> [220.502545] i915 device info: has_64bit_reloc: yes

<7> [220.502548] i915 device info: has_64k_pages: no

<7> [220.502550] i915 device info: gpu_reset_clobbers_display: no

<7> [220.502553] i915 device info: has_reset_engine: yes

<7> [220.502555] i915 device info: has_3d_pipeline: yes

<7> [220.502557] i915 device info: has_4tile: no

<7> [220.502560] i915 device info: has_flat_ccs: no

<7> [220.502562] i915 device info: has_global_mocs: no

<7> [220.502565] i915 device info: has_gmd_id: no

<7> [220.502567] i915 device info: has_gt_uc: yes

<7> [220.502570] i915 device info: has_heci_pxp: no

<7> [220.502572] i915 device info: has_heci_gscfi: no

<7> [220.502575] i915 device info: has_guc_deprivilege: no

<7> [220.502578] i915 device info: has_l3_ccs_read: no

<7> [220.502580] i915 device info: has_l3_dpf: no

<7> [220.502582] i915 device info: has_llc: yes

<7> [220.502576] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] status updated from unknown to disconnected

<7> [220.502585] i915 device info: has_logical_ring_contexts: yes

<7> [220.502587] i915 device info: has_logical_ring_elsq: no

<7> [220.502589] i915 device info: has_media_ratio_mode: no

<7> [220.502591] i915 device info: has_mslice_steering: no

<7> [220.502597] i915 device info: has_oa_bpc_reporting: no

<7> [220.502600] i915 device info: has_oa_slice_contrib_limits: no

<7> [220.502602] i915 device info: has_oam: no

<7> [220.502605] i915 device info: has_one_eu_per_fuse_bit: no

<7> [220.502608] i915 device info: has_pxp: no

<7> [220.502610] i915 device info: has_rc6: yes

<7> [220.502605] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [220.502612] i915 device info: has_rc6p: no

<7> [220.502614] i915 device info: has_rps: yes

<7> [220.502616] i915 device info: has_runtime_pm: yes

<7> [220.502619] i915 device info: has_snoop: no

<7> [220.502623] i915 device info: has_coherent_ggtt: yes

<7> [220.502626] i915 device info: tuning_thread_rr_after_dep: no

<7> [220.502628] i915 device info: unfenced_needs_alignment: no

<7> [220.502631] i915 device info: hws_needs_physical: no

<7> [220.502633] i915 device info: has_pooled_eu: no

<7> [220.502628] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [220.502636] i915 device info: cursor_needs_physical: no

<7> [220.502638] i915 device info: has_cdclk_crawl: no

<7> [220.502640] i915 device info: has_cdclk_squash: no

<7> [220.502642] i915 device info: has_ddi: yes

<7> [220.502646] i915 device info: has_dp_mst: yes

<7> [220.502648] i915 device info: has_dsb: no

<7> [220.502651] i915 device info: has_fpga_dbg: yes

<7> [220.502653] i915 device info: has_gmch: no

<7> [220.502656] i915 device info: has_hotplug: yes

<7> [220.502658] i915 device info: has_hti: no

<7> [220.502661] i915 device info: has_ipc: yes

<7> [220.502663] i915 device info: has_overlay: no

<7> [220.502666] i915 device info: has_psr: yes

<7> [220.502668] i915 device info: has_psr_hw_tracking: yes

<7> [220.502671] i915 device info: overlay_needs_physical: no

<7> [220.502673] i915 device info: supports_tv: no

<7> [220.502676] i915 device info: has_hdcp: yes

<7> [220.502678] i915 device info: has_dmc: yes

<7> [220.502681] i915 device info: has_dsc: no

<7> [220.502683] i915 device info: rawclk rate: 24000 kHz

<7> [220.502686] i915 device info: iommu: enabled

<7> [220.502689] i915 device info: available engines: 40403

<7> [220.502691] i915 device info: slice total: 1, mask=0001

<7> [220.502694] i915 device info: subslice total: 3

<7> [220.502697] i915 device info: slice0: 3 subslices, mask=00000007

<7> [220.502700] i915 device info: slice1: 0 subslices, mask=00000000

<7> [220.502703] i915 device info: slice2: 0 subslices, mask=00000000

<7> [220.502705] i915 device info: EU total: 24

<7> [220.502707] i915 device info: EU per subslice: 8

<7> [220.502709] i915 device info: has slice power gating: no

<7> [220.502711] i915 device info: has subslice power gating: no

<7> [220.502713] i915 device info: has EU power gating: yes

<6> [220.502716] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [220.502718] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [220.502720] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [220.502724] i915: Performing live selftests with st_random_seed=0x7001511e st_timeout=500

<6> [220.502728] i915: Running workarounds

<6> [220.502750] i915: Running intel_workarounds_live_selftests/live_dirty_whitelist

<7> [220.502651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [220.502858] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected

<7> [220.502886] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [220.502911] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [220.502930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [220.503139] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to disconnected

<7> [220.503167] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [220.503191] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [220.503199] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [220.503204] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [220.503210] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [220.503214] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [220.503219] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [220.503273] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [220.503286] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [220.503308] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [220.503332] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [220.504354] [drm:drm_client_modeset_probe]

<7> [220.504683] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [220.504736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [220.505038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [220.505059] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [220.505131] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [220.505349] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [220.505369] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [220.505388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [220.505660] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [220.505680] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [220.505700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [220.505910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [220.505930] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [220.505949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [220.506154] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [220.506173] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [220.506207] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [220.506212] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [220.506217] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [220.506222] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [220.506227] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [220.506677] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [220.506774] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [220.506809] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [220.506843] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [220.506914] [drm:drm_client_modeset_probe]

<7> [220.506963] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [220.506984] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [220.507174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [220.507190] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [220.507205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [220.507517] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [220.507538] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [220.507555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [220.507736] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [220.507756] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [220.507775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [220.508000] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [220.508021] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [220.508041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [220.508268] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [220.508288] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [220.508294] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [220.508300] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [220.508305] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [220.508310] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [220.508314] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [220.508347] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [220.508360] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [220.508381] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [220.508403] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [220.534406] i915: Running intel_workarounds_live_selftests/live_reset_whitelist

<6> [220.534412] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [engine]

<5> [220.536973] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds

<6> [220.538052] Checking 5 whitelisted registers on rcs0 (RING_NONPRIV) [device]

<5> [220.540219] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds

<6> [220.541113] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [220.541119] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [220.543458] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [220.544114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [220.544361] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [220.544365] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [220.567365] i915: Running intel_workarounds_live_selftests/live_isolated_whitelist

<6> [220.586369] i915: Running intel_workarounds_live_selftests/live_gpu_reset_workarounds

<6> [220.586378] Verifying after GPU reset...

<7> [220.586384] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [220.586576] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT_REF workarounds on global

<7> [220.586729] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0

<7> [220.586880] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 CTX_REF workarounds on rcs0

<5> [220.588046] i915 0000:00:02.0: [drm] Resetting chip for live_workarounds

<6> [220.588211] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [220.588215] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [220.590319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [220.590559] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [220.590724] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [220.590727] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [220.620352] i915: Running intel_workarounds_live_selftests/live_engine_reset_workarounds

<7> [220.620365] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [220.620534] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT_REF workarounds on global

<7> [220.620688] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 REF workarounds on rcs0

<7> [220.620839] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 CTX_REF workarounds on rcs0

<6> [220.620977] Verifying after rcs0 reset...

<5> [220.622329] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:idle

<5> [220.624317] i915 0000:00:02.0: [drm] Resetting rcs0 for live_workarounds:active

<6> [220.625215] Verifying after bcs0 reset...

<5> [220.628129] i915 0000:00:02.0: [drm] Resetting bcs0 for live_workarounds:active

<6> [220.629096] Verifying after vcs0 reset...

<5> [220.631528] i915 0000:00:02.0: [drm] Resetting vcs0 for live_workarounds:active

<6> [220.632335] Verifying after vecs0 reset...

<5> [220.634606] i915 0000:00:02.0: [drm] Resetting vecs0 for live_workarounds:active

<7> [220.637483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.656353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.656590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [220.656748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [220.656903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [220.657057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [220.677447] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [220.720002] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [220.758678] i915: probe of 0000:00:02.0 failed with error -25

<6> [220.956127] [IGT] i915_selftest: finished subtest workarounds, SUCCESS

Results for igt@i915_selftest@live@workarounds