igt@i915_selftest@live@guc_hang on shard-rkl@linus-v6.4 Test details

Detail	Value
Hostname	shard-rkl-2
Igt-Version	IGT-Version: 1.27.1-gfeb4fdbcc (x86_64) (Linux: 6.4.0-linus-v6.4-g6995e2de6891+ x86_64)
Out	Starting dynamic subtest: guc_hang Dynamic subtest guc_hang: SUCCESS (1.634s)
Err	Starting dynamic subtest: guc_hang Dynamic subtest guc_hang: SUCCESS (1.634s)
Dmesg	<6> [338.508111] [IGT] i915_selftest: starting dynamic subtest guc_hang <5> [338.571907] Setting dangerous option live_selftests - tainting kernel <7> [338.598321] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7> [338.598495] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [338.598643] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Tiger Lake LP PCH <7> [338.598772] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [338.598982] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [338.599341] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0001, instances: 0001 <7> [338.599433] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <7> [338.599736] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [338.599835] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [338.599934] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [338.600015] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [338.600019] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [338.600224] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [338.600236] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x00000000a0200087 <7> [338.600361] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [338.600603] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x93ab8018 <7> [338.600749] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [338.600867] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [338.600999] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [338.601108] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [338.601227] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [338.601355] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [338.601451] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [338.601544] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3201 tRP=22 tRDPRE=12 tRAS=52 tRCD=22 tRC=74 <7> [338.601681] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=9219 <7> [338.601805] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=13170 <7> [338.601931] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=2 deratedbw=16761 <7> [338.602049] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=19408 <7> [338.602167] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=20000 <7> [338.602282] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=20000 <7> [338.602516] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [338.602629] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 243 <7> [338.602742] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 6, min size 7) <7> [338.602854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5) <7> [338.602983] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [338.603093] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [338.603205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812) <7> [338.603313] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7> [338.603418] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [338.603531] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [338.603641] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1364, min size 1366) <7> [338.603749] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7> [338.603865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 58, min size 78) <7> [338.603995] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [338.604109] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [338.604217] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [338.604323] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [338.604432] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [338.604550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [338.604666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [338.604777] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [338.604895] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [338.605023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port D trying to use the same DDC pin (0x9) as port A, disabling port A DVI/HDMI support <7> [338.605138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [338.605249] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [338.605357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [338.605464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [338.605579] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [338.605693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7> [338.605803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [338.605919] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [338.606025] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7> [338.606159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [338.606335] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [338.606470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [338.606600] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [338.606733] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [338.606867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [338.607009] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [338.607136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [338.607260] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [338.607388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [338.607534] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [338.607668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [338.607852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [338.607983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [338.608097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [338.608240] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [338.608384] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [338.608519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [338.608648] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [338.608774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [338.608911] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [338.609039] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [338.609159] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [338.609263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [338.609413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [338.609572] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/rkl_dmc_ver2_03.bin <6> [338.610658] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/rkl_dmc_ver2_03.bin (v2.3) <7> [338.610948] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [338.611354] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 22 us <7> [338.611492] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec) <7> [338.611609] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 25 (25.0 usec) <7> [338.611716] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 25 (25.0 usec) <7> [338.611818] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 25 (25.0 usec) <7> [338.611928] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec) <7> [338.612027] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 73 (73.0 usec) <7> [338.612126] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 123 (123.0 usec) <7> [338.612223] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 143 (143.0 usec) <7> [338.616167] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 2 display pipes available. <7> [338.617591] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [338.617825] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 648000 kHz <7> [338.618014] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 1296000 kHz <7> [338.618215] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT) <7> [338.618401] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A] <7> [338.618581] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [338.618749] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [338.618931] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [338.619074] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [338.619190] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [338.619301] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [338.619414] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [338.619523] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [338.619630] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [338.619778] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0 <7> [338.619965] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [338.620084] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [338.620192] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [338.620296] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [338.620397] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [338.620567] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [338.620696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [338.620955] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on <7> [338.621093] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [338.621262] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [338.621385] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [338.621536] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [338.621653] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [338.856893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [338.885892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [338.914891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [338.943891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [338.972893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.001892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.030892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.059891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.088893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.117892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.146892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.175891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.204893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.233892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.262891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.291892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.320893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.349892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.378891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.407891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.436892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.465892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.494891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.523891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.552892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.581892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.610892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.639891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.668891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.697892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.726893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.755892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [339.756069] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [339.756084] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [339.756141] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off <7> [339.756359] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [339.756520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [339.756736] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI B/PHY B] using AUX B (platform default) <7> [339.756876] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI B/PHY B] <7> [339.757017] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [339.757298] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:143:DDI TC1/PHY C] using AUX D (platform default) <7> [339.757438] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:143:DDI TC1/PHY C] <7> [339.757576] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:143:DDI TC1/PHY C] Using DDC pin 0x9 (VBT) <7> [339.757732] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:147:DDI TC2/PHY D] using AUX E (VBT) <7> [339.757844] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:147:DDI TC2/PHY D] <7> [339.758109] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:147:DDI TC2/PHY D] <7> [339.758226] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:147:DDI TC2/PHY D] Using DDC pin 0xa (VBT) <7> [339.758607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled <7> [339.758758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7> [339.758900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [339.759027] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7> [339.759147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7> [339.759265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7> [339.759374] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7> [339.759480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7> [339.759584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7> [339.759687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7> [339.759788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7> [339.759906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7> [339.760033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7> [339.760150] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7> [339.760261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI B/PHY B] hw state readout: disabled, pipe A <7> [339.760367] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:143:DDI TC1/PHY C] hw state readout: disabled, pipe A <7> [339.760469] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:147:DDI TC2/PHY D] hw state readout: disabled, pipe A <7> [339.760566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:149:DP-MST A] hw state readout: disabled, pipe A <7> [339.760666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DP-MST B] hw state readout: disabled, pipe B <7> [339.760780] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [339.760923] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [339.761053] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [339.761191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:HDMI-A-1] hw state readout: disabled <7> [339.761321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:144:HDMI-A-2] hw state readout: disabled <7> [339.761440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:148:DP-1] hw state readout: disabled <7> [339.761562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:155:HDMI-A-3] hw state readout: disabled <7> [339.761672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [339.761777] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7> [339.761898] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7> [339.762000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7> [339.762099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7> [339.762196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7> [339.762292] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [339.762423] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7> [339.762546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7> [339.762655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7> [339.762762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7> [339.762864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7> [339.762976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7> [339.763075] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [339.763220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state] <7> [339.763341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7> [339.763466] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [339.763593] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [339.763752] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [339.763859] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [339.763979] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [339.763987] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 3 GT workarounds on global <7> [339.764690] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0 <7> [339.764812] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [339.764935] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7> [339.765799] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7> [339.765948] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0 <7> [339.766063] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0 <7> [339.766348] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7> [339.766455] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0 <7> [339.766721] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7> [339.766819] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0 <7> [339.773314] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping <7> [339.773453] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7> [339.773581] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [339.773708] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [339.774247] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [339.774351] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [339.774446] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [339.774530] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [339.775943] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:HDMI-A-1] generating connector hotplug event <7> [339.776165] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:144:HDMI-A-2] generating connector hotplug event <7> [339.776389] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY D bus for card0-DP-1 <7> [339.777031] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:148:DP-1] generating connector hotplug event <7> [339.777256] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:155:HDMI-A-3] generating connector hotplug event <6> [339.777286] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [339.778556] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [339.787481] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [339.789948] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input52 <7> [339.790406] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x9010) <7> [339.790792] [drm:drm_client_modeset_probe] <7> [339.790830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] <7> [339.790790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [339.790855] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:134:HDMI-A-1] <7> [339.791057] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] status updated from unknown to disconnected <7> [339.791084] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] disconnected <7> [339.791102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] <7> [339.791116] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:144:HDMI-A-2] <7> [339.791280] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] status updated from unknown to disconnected <7> [339.791302] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] disconnected <7> [339.791318] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] <7> [339.791335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:148:DP-1] <7> [339.791510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] status updated from unknown to disconnected <7> [339.791530] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] disconnected <7> [339.791548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] <7> [339.791470] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [339.791564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:155:HDMI-A-3] <7> [339.791655] i915 device info: pciid=0x4c8a rev=0x04 platform=ROCKETLAKE (subplatform=0x0) gen=12 <7> [339.791659] i915 device info: graphics version: 12 <7> [339.791660] i915 device info: media version: 12 <7> [339.791662] i915 device info: display version: 12 <7> [339.791664] i915 device info: graphics stepping: C0 <7> [339.791666] i915 device info: media stepping: C0 <7> [339.791668] i915 device info: display stepping: C0 <7> [339.791669] i915 device info: base die stepping: ** <7> [339.791671] i915 device info: gt: 0 <7> [339.791673] i915 device info: memory-regions: 0x21 <7> [339.791674] i915 device info: page-sizes: 0x211000 <7> [339.791676] i915 device info: platform: ROCKETLAKE <7> [339.791678] i915 device info: ppgtt-size: 48 <7> [339.791679] i915 device info: ppgtt-type: 2 <7> [339.791681] i915 device info: dma_mask_size: 39 <7> [339.791683] i915 device info: is_mobile: no <7> [339.791685] i915 device info: is_lp: no <7> [339.791686] i915 device info: require_force_probe: no <7> [339.791688] i915 device info: is_dgfx: no <7> [339.791689] i915 device info: has_64bit_reloc: yes <7> [339.791690] i915 device info: has_64k_pages: no <7> [339.791692] i915 device info: gpu_reset_clobbers_display: no <7> [339.791693] i915 device info: has_reset_engine: yes <7> [339.791695] i915 device info: has_3d_pipeline: yes <7> [339.791696] i915 device info: has_4tile: no <7> [339.791697] i915 device info: has_flat_ccs: no <7> [339.791699] i915 device info: has_global_mocs: yes <7> [339.791701] i915 device info: has_gmd_id: no <7> [339.791703] i915 device info: has_gt_uc: yes <7> [339.791704] i915 device info: has_heci_pxp: no <7> [339.791706] i915 device info: has_heci_gscfi: no <7> [339.791708] i915 device info: has_guc_deprivilege: no <7> [339.791710] i915 device info: has_l3_ccs_read: no <7> [339.791712] i915 device info: has_l3_dpf: no <7> [339.791713] i915 device info: has_llc: yes <7> [339.791715] i915 device info: has_logical_ring_contexts: yes <7> [339.791717] i915 device info: has_logical_ring_elsq: yes <7> [339.791719] i915 device info: has_media_ratio_mode: no <7> [339.791721] i915 device info: has_mslice_steering: no <7> [339.791722] i915 device info: has_oa_bpc_reporting: no <7> [339.791725] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] status updated from unknown to disconnected <7> [339.791737] i915 device info: has_oa_slice_contrib_limits: no <7> [339.791738] i915 device info: has_oam: no <7> [339.791740] i915 device info: has_one_eu_per_fuse_bit: no <7> [339.791741] i915 device info: has_pxp: yes <7> [339.791744] i915 device info: has_rc6: yes <7> [339.791746] i915 device info: has_rc6p: no <7> [339.791749] i915 device info: has_rps: yes <7> [339.791750] i915 device info: has_runtime_pm: yes <7> [339.791752] i915 device info: has_snoop: no <7> [339.791748] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] disconnected <7> [339.791754] i915 device info: has_coherent_ggtt: no <7> [339.791756] i915 device info: tuning_thread_rr_after_dep: no <7> [339.791757] i915 device info: unfenced_needs_alignment: no <7> [339.791759] i915 device info: hws_needs_physical: no <7> [339.791762] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [339.791764] i915 device info: has_pooled_eu: no <7> [339.791766] i915 device info: cursor_needs_physical: no <7> [339.791766] [drm:drm_client_modeset_probe] connector 134 enabled? no <7> [339.791769] i915 device info: has_cdclk_crawl: no <7> [339.791769] [drm:drm_client_modeset_probe] connector 144 enabled? no <7> [339.791771] i915 device info: has_cdclk_squash: no <7> [339.791771] [drm:drm_client_modeset_probe] connector 148 enabled? no <7> [339.791773] [drm:drm_client_modeset_probe] connector 155 enabled? no <7> [339.791774] i915 device info: has_ddi: yes <7> [339.791776] i915 device info: has_dp_mst: yes <7> [339.791779] i915 device info: has_dsb: yes <7> [339.791781] i915 device info: has_fpga_dbg: yes <7> [339.791783] i915 device info: has_gmch: no <7> [339.791785] i915 device info: has_hotplug: yes <7> [339.791787] i915 device info: has_hti: yes <7> [339.791789] i915 device info: has_ipc: yes <7> [339.791791] i915 device info: has_overlay: no <7> [339.791793] i915 device info: has_psr: yes <7> [339.791795] i915 device info: has_psr_hw_tracking: no <7> [339.791797] i915 device info: overlay_needs_physical: no <7> [339.791799] i915 device info: supports_tv: no <7> [339.791802] i915 device info: has_hdcp: yes <7> [339.791804] i915 device info: has_dmc: yes <7> [339.791804] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [339.791807] i915 device info: has_dsc: yes <7> [339.791809] i915 device info: rawclk rate: 24000 kHz <7> [339.791812] i915 device info: iommu: enabled <7> [339.791813] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [339.791815] i915 device info: available engines: 40403 <7> [339.791817] i915 device info: slice total: 1, mask=0001 <7> [339.791819] i915 device info: subslice total: 2 <7> [339.791822] i915 device info: slice0: 2 subslices, mask=00000003 <7> [339.791824] i915 device info: EU total: 32 <7> [339.791827] i915 device info: EU per subslice: 16 <7> [339.791829] i915 device info: has slice power gating: yes <7> [339.791831] i915 device info: has subslice power gating: no <7> [339.791833] i915 device info: has EU power gating: no <6> [339.791836] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [339.791837] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <7> [339.791831] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [339.791840] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [339.791842] i915: Performing live selftests with st_random_seed=0x6a2e78b0 st_timeout=500 <6> [339.791846] i915: Running guc_hang <6> [339.791850] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [339.791857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [339.818398] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [339.870599] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [339.909611] i915: probe of 0000:00:02.0 failed with error -25 <6> [340.143065] [IGT] i915_selftest: finished subtest guc_hang, SUCCESS

<6> [338.508111] [IGT] i915_selftest: starting dynamic subtest guc_hang

<5> [338.571907] Setting dangerous option live_selftests - tainting kernel

<7> [338.598321] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K

<7> [338.598495] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [338.598643] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Tiger Lake LP PCH

<7> [338.598772] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [338.598982] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [338.599341] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0001, instances: 0001

<7> [338.599433] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001

<7> [338.599736] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [338.599835] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [338.599934] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [338.600015] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [338.600019] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [338.600224] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [338.600236] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x00000000a0200087

<7> [338.600361] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [338.600603] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x93ab8018

<7> [338.600749] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [338.600867] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [338.600999] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [338.601108] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [338.601227] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [338.601355] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [338.601451] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [338.601544] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3201 tRP=22 tRDPRE=12 tRAS=52 tRCD=22 tRC=74

<7> [338.601681] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=9219

<7> [338.601805] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=13170

<7> [338.601931] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=2 deratedbw=16761

<7> [338.602049] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=19408

<7> [338.602167] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=20000

<7> [338.602282] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=20000

<7> [338.602516] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [338.602629] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 243

<7> [338.602742] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 6, min size 7)

<7> [338.602854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)

<7> [338.602983] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [338.603093] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [338.603205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812)

<7> [338.603313] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)

<7> [338.603418] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [338.603531] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [338.603641] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1364, min size 1366)

<7> [338.603749] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)

<7> [338.603865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 58, min size 78)

<7> [338.603995] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [338.604109] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [338.604217] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [338.604323] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [338.604432] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [338.604550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [338.604666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [338.604777] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [338.604895] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [338.605023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port D trying to use the same DDC pin (0x9) as port A, disabling port A DVI/HDMI support

<7> [338.605138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [338.605249] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [338.605357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [338.605464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [338.605579] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [338.605693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0

<7> [338.605803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [338.605919] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [338.606025] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a

<7> [338.606159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [338.606335] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [338.606470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [338.606600] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [338.606733] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [338.606867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [338.607009] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [338.607136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [338.607260] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [338.607388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [338.607534] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [338.607668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [338.607852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [338.607983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [338.608097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [338.608240] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [338.608384] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [338.608519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [338.608648] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [338.608774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [338.608911] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [338.609039] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [338.609159] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [338.609263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [338.609413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [338.609572] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/rkl_dmc_ver2_03.bin

<6> [338.610658] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/rkl_dmc_ver2_03.bin (v2.3)

<7> [338.610948] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [338.611354] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 22 us

<7> [338.611492] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)

<7> [338.611609] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 25 (25.0 usec)

<7> [338.611716] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 25 (25.0 usec)

<7> [338.611818] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 25 (25.0 usec)

<7> [338.611928] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec)

<7> [338.612027] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 73 (73.0 usec)

<7> [338.612126] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 123 (123.0 usec)

<7> [338.612223] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 143 (143.0 usec)

<7> [338.616167] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 2 display pipes available.

<7> [338.617591] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [338.617825] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 648000 kHz

<7> [338.618014] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 1296000 kHz

<7> [338.618215] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT)

<7> [338.618401] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A]

<7> [338.618581] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [338.618749] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [338.618931] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [338.619074] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [338.619190] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [338.619301] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [338.619414] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [338.619523] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [338.619630] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [338.619778] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0

<7> [338.619965] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [338.620084] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [338.620192] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [338.620296] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [338.620397] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [338.620567] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [338.620696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [338.620955] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on

<7> [338.621093] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [338.621262] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [338.621385] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [338.621536] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [338.621653] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [338.856893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [338.885892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [338.914891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [338.943891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [338.972893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.001892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.030892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.059891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.088893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.117892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.146892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.175891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.204893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.233892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.262891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.291892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.320893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.349892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.378891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.407891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.436892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.465892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.494891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.523891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.552892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.581892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.610892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.639891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.668891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.697892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.726893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.755892] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [339.756069] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [339.756084] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [339.756141] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off

<7> [339.756359] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [339.756520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [339.756736] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI B/PHY B] using AUX B (platform default)

<7> [339.756876] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI B/PHY B]

<7> [339.757017] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [339.757298] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:143:DDI TC1/PHY C] using AUX D (platform default)

<7> [339.757438] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:143:DDI TC1/PHY C]

<7> [339.757576] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:143:DDI TC1/PHY C] Using DDC pin 0x9 (VBT)

<7> [339.757732] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:147:DDI TC2/PHY D] using AUX E (VBT)

<7> [339.757844] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:147:DDI TC2/PHY D]

<7> [339.758109] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:147:DDI TC2/PHY D]

<7> [339.758226] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:147:DDI TC2/PHY D] Using DDC pin 0xa (VBT)

<7> [339.758607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled

<7> [339.758758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled

<7> [339.758900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [339.759027] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A

<7> [339.759147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A

<7> [339.759265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A

<7> [339.759374] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A

<7> [339.759480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A

<7> [339.759584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B

<7> [339.759687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B

<7> [339.759788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B

<7> [339.759906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B

<7> [339.760033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B

<7> [339.760150] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B

<7> [339.760261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [339.760367] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:143:DDI TC1/PHY C] hw state readout: disabled, pipe A

<7> [339.760469] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:147:DDI TC2/PHY D] hw state readout: disabled, pipe A

<7> [339.760566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:149:DP-MST A] hw state readout: disabled, pipe A

<7> [339.760666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DP-MST B] hw state readout: disabled, pipe B

<7> [339.760780] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [339.760923] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [339.761053] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [339.761191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:HDMI-A-1] hw state readout: disabled

<7> [339.761321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:144:HDMI-A-2] hw state readout: disabled

<7> [339.761440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:148:DP-1] hw state readout: disabled

<7> [339.761562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:155:HDMI-A-3] hw state readout: disabled

<7> [339.761672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [339.761777] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz

<7> [339.761898] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz

<7> [339.762000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz

<7> [339.762099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz

<7> [339.762196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz

<7> [339.762292] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [339.762423] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz

<7> [339.762546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz

<7> [339.762655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz

<7> [339.762762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz

<7> [339.762864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz

<7> [339.762976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz

<7> [339.763075] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [339.763220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]

<7> [339.763341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]

<7> [339.763466] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [339.763593] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [339.763752] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [339.763859] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [339.763979] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [339.763987] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 3 GT workarounds on global

<7> [339.764690] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0

<7> [339.764812] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [339.764935] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0

<7> [339.765799] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0

<7> [339.765948] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0

<7> [339.766063] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0

<7> [339.766348] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0

<7> [339.766455] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0

<7> [339.766721] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0

<7> [339.766819] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0

<7> [339.773314] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping

<7> [339.773453] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping

<7> [339.773581] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [339.773708] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [339.774247] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [339.774351] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [339.774446] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [339.774530] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [339.775943] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:HDMI-A-1] generating connector hotplug event

<7> [339.776165] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:144:HDMI-A-2] generating connector hotplug event

<7> [339.776389] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY D bus for card0-DP-1

<7> [339.777031] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:148:DP-1] generating connector hotplug event

<7> [339.777256] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:155:HDMI-A-3] generating connector hotplug event

<6> [339.777286] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [339.778556] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [339.787481] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [339.789948] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input52

<7> [339.790406] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x9010)

<7> [339.790792] [drm:drm_client_modeset_probe]

<7> [339.790830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1]

<7> [339.790790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [339.790855] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:134:HDMI-A-1]

<7> [339.791057] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] status updated from unknown to disconnected

<7> [339.791084] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] disconnected

<7> [339.791102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2]

<7> [339.791116] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:144:HDMI-A-2]

<7> [339.791280] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] status updated from unknown to disconnected

<7> [339.791302] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] disconnected

<7> [339.791318] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1]

<7> [339.791335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:148:DP-1]

<7> [339.791510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] status updated from unknown to disconnected

<7> [339.791530] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] disconnected

<7> [339.791548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3]

<7> [339.791470] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [339.791564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:155:HDMI-A-3]

<7> [339.791655] i915 device info: pciid=0x4c8a rev=0x04 platform=ROCKETLAKE (subplatform=0x0) gen=12

<7> [339.791659] i915 device info: graphics version: 12

<7> [339.791660] i915 device info: media version: 12

<7> [339.791662] i915 device info: display version: 12

<7> [339.791664] i915 device info: graphics stepping: C0

<7> [339.791666] i915 device info: media stepping: C0

<7> [339.791668] i915 device info: display stepping: C0

<7> [339.791669] i915 device info: base die stepping: **

<7> [339.791671] i915 device info: gt: 0

<7> [339.791673] i915 device info: memory-regions: 0x21

<7> [339.791674] i915 device info: page-sizes: 0x211000

<7> [339.791676] i915 device info: platform: ROCKETLAKE

<7> [339.791678] i915 device info: ppgtt-size: 48

<7> [339.791679] i915 device info: ppgtt-type: 2

<7> [339.791681] i915 device info: dma_mask_size: 39

<7> [339.791683] i915 device info: is_mobile: no

<7> [339.791685] i915 device info: is_lp: no

<7> [339.791686] i915 device info: require_force_probe: no

<7> [339.791688] i915 device info: is_dgfx: no

<7> [339.791689] i915 device info: has_64bit_reloc: yes

<7> [339.791690] i915 device info: has_64k_pages: no

<7> [339.791692] i915 device info: gpu_reset_clobbers_display: no

<7> [339.791693] i915 device info: has_reset_engine: yes

<7> [339.791695] i915 device info: has_3d_pipeline: yes

<7> [339.791696] i915 device info: has_4tile: no

<7> [339.791697] i915 device info: has_flat_ccs: no

<7> [339.791699] i915 device info: has_global_mocs: yes

<7> [339.791701] i915 device info: has_gmd_id: no

<7> [339.791703] i915 device info: has_gt_uc: yes

<7> [339.791704] i915 device info: has_heci_pxp: no

<7> [339.791706] i915 device info: has_heci_gscfi: no

<7> [339.791708] i915 device info: has_guc_deprivilege: no

<7> [339.791710] i915 device info: has_l3_ccs_read: no

<7> [339.791712] i915 device info: has_l3_dpf: no

<7> [339.791713] i915 device info: has_llc: yes

<7> [339.791715] i915 device info: has_logical_ring_contexts: yes

<7> [339.791717] i915 device info: has_logical_ring_elsq: yes

<7> [339.791719] i915 device info: has_media_ratio_mode: no

<7> [339.791721] i915 device info: has_mslice_steering: no

<7> [339.791722] i915 device info: has_oa_bpc_reporting: no

<7> [339.791725] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] status updated from unknown to disconnected

<7> [339.791737] i915 device info: has_oa_slice_contrib_limits: no

<7> [339.791738] i915 device info: has_oam: no

<7> [339.791740] i915 device info: has_one_eu_per_fuse_bit: no

<7> [339.791741] i915 device info: has_pxp: yes

<7> [339.791744] i915 device info: has_rc6: yes

<7> [339.791746] i915 device info: has_rc6p: no

<7> [339.791749] i915 device info: has_rps: yes

<7> [339.791750] i915 device info: has_runtime_pm: yes

<7> [339.791752] i915 device info: has_snoop: no

<7> [339.791748] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] disconnected

<7> [339.791754] i915 device info: has_coherent_ggtt: no

<7> [339.791756] i915 device info: tuning_thread_rr_after_dep: no

<7> [339.791757] i915 device info: unfenced_needs_alignment: no

<7> [339.791759] i915 device info: hws_needs_physical: no

<7> [339.791762] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [339.791764] i915 device info: has_pooled_eu: no

<7> [339.791766] i915 device info: cursor_needs_physical: no

<7> [339.791766] [drm:drm_client_modeset_probe] connector 134 enabled? no

<7> [339.791769] i915 device info: has_cdclk_crawl: no

<7> [339.791769] [drm:drm_client_modeset_probe] connector 144 enabled? no

<7> [339.791771] i915 device info: has_cdclk_squash: no

<7> [339.791771] [drm:drm_client_modeset_probe] connector 148 enabled? no

<7> [339.791773] [drm:drm_client_modeset_probe] connector 155 enabled? no

<7> [339.791774] i915 device info: has_ddi: yes

<7> [339.791776] i915 device info: has_dp_mst: yes

<7> [339.791779] i915 device info: has_dsb: yes

<7> [339.791781] i915 device info: has_fpga_dbg: yes

<7> [339.791783] i915 device info: has_gmch: no

<7> [339.791785] i915 device info: has_hotplug: yes

<7> [339.791787] i915 device info: has_hti: yes

<7> [339.791789] i915 device info: has_ipc: yes

<7> [339.791791] i915 device info: has_overlay: no

<7> [339.791793] i915 device info: has_psr: yes

<7> [339.791795] i915 device info: has_psr_hw_tracking: no

<7> [339.791797] i915 device info: overlay_needs_physical: no

<7> [339.791799] i915 device info: supports_tv: no

<7> [339.791802] i915 device info: has_hdcp: yes

<7> [339.791804] i915 device info: has_dmc: yes

<7> [339.791804] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [339.791807] i915 device info: has_dsc: yes

<7> [339.791809] i915 device info: rawclk rate: 24000 kHz

<7> [339.791812] i915 device info: iommu: enabled

<7> [339.791813] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [339.791815] i915 device info: available engines: 40403

<7> [339.791817] i915 device info: slice total: 1, mask=0001

<7> [339.791819] i915 device info: subslice total: 2

<7> [339.791822] i915 device info: slice0: 2 subslices, mask=00000003

<7> [339.791824] i915 device info: EU total: 32

<7> [339.791827] i915 device info: EU per subslice: 16

<7> [339.791829] i915 device info: has slice power gating: yes

<7> [339.791831] i915 device info: has subslice power gating: no

<7> [339.791833] i915 device info: has EU power gating: no

<6> [339.791836] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [339.791837] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<7> [339.791831] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [339.791840] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [339.791842] i915: Performing live selftests with st_random_seed=0x6a2e78b0 st_timeout=500

<6> [339.791850] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [339.791857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [339.818398] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [339.870599] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [339.909611] i915: probe of 0000:00:02.0 failed with error -25

<6> [340.143065] [IGT] i915_selftest: finished subtest guc_hang, SUCCESS

Results for igt@i915_selftest@live@guc_hang