Results for igt@i915_pm_rpm@basic-pci-d3-state

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-g621c2d311 (x86_64) (Linux: 6.4.0-linus-v6.4-g6995e2de6891+ x86_64)
Out 
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: yes
Usage count: 0
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xe6/0x240 [i915]
   pci_pm_runtime_suspend+0x5d/0x1a0
   __rpm_callback+0x3f/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 0
Starting subtest: basic-pci-d3-state
Subtest basic-pci-d3-state: SUCCESS (0.365s)
Err 
Starting subtest: basic-pci-d3-state
Subtest basic-pci-d3-state: SUCCESS (0.365s)
Dmesg
<6> [79.770513] Console: switching to colour dummy device 80x25
<6> [79.770561] [IGT] i915_pm_rpm: executing
<7> [79.779729] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [79.780449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [79.780466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [79.780590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.781142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.781325] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [79.781409] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [79.781427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [79.781586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.782150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [79.782605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [79.783240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [79.784331] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [79.785430] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [79.786219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [79.786369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [79.786527] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [79.786654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [79.787257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.787388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [79.787453] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [79.787465] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [79.787581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.788647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.788822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [79.789551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.790101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.790106] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [79.790231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [79.818085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.818090] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [79.818214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.818341] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [79.822041] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [79.822055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [79.822179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.822669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.822908] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [79.823356] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [79.823370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [79.823489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.823989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [79.824466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [79.825066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [79.826170] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [79.827307] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [79.828070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [79.828216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [79.828346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [79.828474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [79.829072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.829219] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [79.829723] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [79.829737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [79.829957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.831067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.831638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [79.832314] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.832794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.832798] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [79.832947] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [79.859191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.859196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [79.859321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.859447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [79.859754] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [79.859766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [79.859960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.860435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.860602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [79.860637] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [79.860654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [79.860789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.861292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [79.861822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [79.862389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [79.863510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [79.864552] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [79.865173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [79.865320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [79.865449] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [79.865575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [79.866195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.866327] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [79.866353] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [79.866364] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [79.866484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [79.867570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.867732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [79.868465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [79.869016] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.869020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [79.869128] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [79.896484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [79.896489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [79.896602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [79.896732] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [90.944112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [90.949744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [90.972946] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [90.979201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [90.979373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [90.980141] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [90.980062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.981074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.981690] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [90.981913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [90.982201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [90.982775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [90.983360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [90.983576] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [90.983795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [90.984499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [90.985195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [90.986876] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [90.986077] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [90.990197] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.014656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.018977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.019171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.019701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.020259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.020840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.022710] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.023375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.024012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.024280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.024420] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.024556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.025205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.025400] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.025420] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.025549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.026905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.027042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.027771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.028297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.028302] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.028426] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.054162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.054167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.054278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.054409] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.054451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.057304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.081722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.085514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.085648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.085770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.086226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.086814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.086981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.087104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.087689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.087902] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.088994] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [91.089418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.090767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.115142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.120437] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.120564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.121083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.121260] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.121283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.121476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.122032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.122522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.123148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.124352] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.125484] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.126215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.126375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.126512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.126646] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.127329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.127477] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.127499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.129818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.154186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.158858] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.159024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.159189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.159683] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.160258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.160421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.160578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.161205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.161380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.162563] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.163856] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.188061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.193430] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.193544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.194665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.194846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.195545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.196070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.196076] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.196200] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.221366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.221371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.221486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.221625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.221648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.221772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.222275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.222423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.222464] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.222583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.223054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.223558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.224166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.225335] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.226420] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.227198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.227345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.227475] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.227602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.228273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.228436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.228450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.228567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.229276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.229386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.230050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.230597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.230601] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.230710] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.258572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.258577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.258687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.258845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.258863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.261700] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<6> [91.363774] [IGT] i915_pm_rpm: starting subtest basic-pci-d3-state
<7> [91.372659] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [91.383933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.389346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.389556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.389794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.390365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.391012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.391265] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.391482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.392167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.392409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.393482] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [91.396818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.421190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.425870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.426063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.426257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.426757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.427336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.427532] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.427723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.428379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.428630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.429705] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [91.430412] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.432798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.457133] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.461885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.462019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.462511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.462677] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.462699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.462855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.463341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.463878] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.464421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.465571] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.466713] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.467245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.467435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.467572] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.467705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.468310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.468455] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.468478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.470855] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.495109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.500364] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.500523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.500681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.501200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.501778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.501963] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.502122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.502732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.503043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.503047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.506884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.531355] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.535894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.536063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.537199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.537404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.538129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.538639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.538645] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.538828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.564017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.564024] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.564167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.564335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.564363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.564514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.565038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.565276] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.565295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.565453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.565963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.566459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.567049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [91.568179] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.569014] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.569786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.569959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.570100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.570237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.570855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.571003] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.571019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.571149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.572265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.572447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.573221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.573718] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.573724] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.573873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.601218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.601224] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.601362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.601492] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.601507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [91.604400] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [91.716003] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [91.725105] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [91.725097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [91.725607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.726037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.727042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.727793] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [91.727860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [91.728352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<6> [91.729349] [IGT] i915_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS
<7> [91.730056] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [91.731088] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [91.731751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [91.732041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.732267] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.732489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.733246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.733788] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [91.733909] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [91.734186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.735013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.735214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [91.736059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [91.737185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.737194] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [91.737393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [91.765335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [91.765341] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [91.765463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [91.765603] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [91.765728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.765895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.766329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.766942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.767076] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.767207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.767788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [91.768044] [IGT] i915_pm_rpm: exiting, ret=0
<7> [91.768987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.769116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.769542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.770207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.770349] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.770472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.771119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [91.771409] Console: switching to colour frame buffer device 128x48
<7> [91.771688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [91.771820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [91.772284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [91.772929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [91.773072] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [91.773198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [91.773774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2023-06-26 09:03:30