igt@i915_selftest@live@gt_mocs on fi-cfl-guc@linus-v6.4 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g621c2d311 (x86_64) (Linux: 6.4.0-linus-v6.4-g6995e2de6891+ x86_64)
Out	Starting dynamic subtest: gt_mocs Dynamic subtest gt_mocs: SUCCESS (0.632s)
Err	Starting dynamic subtest: gt_mocs Dynamic subtest gt_mocs: SUCCESS (0.632s)
Dmesg	<6> [201.550984] [IGT] i915_selftest: starting dynamic subtest gt_mocs <5> [201.633244] Setting dangerous option enable_guc - tainting kernel <5> [201.633250] Setting dangerous option live_selftests - tainting kernel <7> [201.661960] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [201.662168] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [201.662330] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [201.662339] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP) <7> [201.662512] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [201.662740] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [201.662898] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [201.663454] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [201.663592] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [201.663734] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [201.663881] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [201.664021] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047 <7> [201.664171] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [201.664445] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018 <7> [201.664605] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [201.664769] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [201.664916] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [201.665054] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [201.668744] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [201.668903] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [201.669051] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [201.669197] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [201.669344] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [201.669485] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [201.669621] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [201.669769] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [201.669911] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [201.670039] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [201.670167] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [201.670292] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [201.670417] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [201.670545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [201.671156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [201.671320] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209 <7> [201.671483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [201.671644] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [201.671816] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [201.671979] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [201.672131] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [201.672281] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [201.672431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [201.672583] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [201.672745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [201.672905] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [201.673055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [201.673202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [201.673348] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [201.673498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [201.673648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [201.673848] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [201.674009] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [201.674160] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [201.674307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same AUX CH (0x40) as port A, disabling port A DP support <7> [201.674454] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [201.674601] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [201.674760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [201.674918] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9 <7> [201.675066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [201.675213] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10 <7> [201.675359] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [201.675505] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10 <7> [201.675652] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [201.675807] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [201.675967] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [201.676125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [201.676304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [201.676466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [201.676619] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [201.676781] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [201.676939] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [201.677087] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [201.677277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [201.677424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [201.677570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [201.677744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [201.677928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [201.678076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [201.678224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [201.678371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [201.678544] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [201.679228] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [201.679563] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [201.679666] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [201.679871] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [201.680015] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [201.680155] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [201.680295] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [201.680432] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [201.680570] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [201.680723] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [201.680865] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [201.681004] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [201.682275] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [201.683188] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [201.683372] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not DVI/HDMI/DP compatible, respect it <7> [201.683545] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [201.683724] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [201.683893] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [201.684195] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default) <7> [201.684341] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [201.684478] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [201.684672] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] using AUX D (VBT) <7> [201.684874] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D] <7> [201.685146] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [201.685291] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D] <7> [201.685428] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [201.685622] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] using AUX A (VBT) <7> [201.685824] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E] <7> [201.686012] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [201.686329] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [201.686494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [201.686654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [201.686855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [201.687002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [201.687147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [201.687293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [201.687441] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [201.687587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [201.687791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [201.687938] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [201.688084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [201.688231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [201.688377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [201.688522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A <7> [201.688663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A <7> [201.688854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B <7> [201.688995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C <7> [201.689140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A <7> [201.689287] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [201.689439] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [201.689589] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [201.689795] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [201.689972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [201.690125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [201.690277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [201.690428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled <7> [201.690578] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled <7> [201.690774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [201.690916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [201.691057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [201.691196] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [201.691347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [201.691490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [201.691630] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [201.691822] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [201.691974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [201.692117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [201.692258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [201.692399] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [201.692579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [201.692778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [201.692929] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [201.693079] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [201.693227] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [201.693370] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [201.693510] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [201.695810] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [201.695966] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [201.696108] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [201.696253] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [201.696409] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7> [201.697325] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [201.697483] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [201.697636] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [201.701527] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [201.701752] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [201.723365] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [201.723534] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [201.723682] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [201.723838] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [201.723986] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [201.724134] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000 <7> [201.724280] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [201.724427] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [201.724574] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [201.724727] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [201.724874] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [201.725022] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [201.725168] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [201.725315] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [201.725462] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [201.726478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [201.726482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [201.732749] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [201.733383] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [201.733663] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [201.733665] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [201.733667] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [201.740750] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [201.740990] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [201.741141] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [201.741287] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [201.741432] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [201.741594] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [201.742064] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [201.742212] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [201.742355] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [201.742497] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [201.744470] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [201.744816] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [201.745100] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [201.745664] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <7> [201.745999] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event <7> [201.746280] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [201.746838] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event <6> [201.746884] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [201.748190] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [201.761999] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [201.763674] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input65 <7> [201.764496] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [201.764973] [drm:drm_client_modeset_probe] <7> [201.765024] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [201.764970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [201.765047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [201.765137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [201.765255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [201.765281] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [201.765288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [201.765364] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [201.765381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [201.765460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [201.765581] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [201.765604] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [201.765626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [201.765643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [201.765908] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [201.765934] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [201.765957] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] <7> [201.765927] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [201.765974] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [201.766079] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9 <7> [201.766082] i915 device info: graphics version: 9 <7> [201.766083] i915 device info: media version: 9 <7> [201.766084] i915 device info: display version: 9 <7> [201.766086] i915 device info: graphics stepping: <7> [201.766087] i915 device info: media stepping: <7> [201.766088] i915 device info: display stepping: <7> [201.766090] i915 device info: base die stepping: <7> [201.766091] i915 device info: gt: 2 <7> [201.766092] i915 device info: memory-regions: 0x21 <7> [201.766093] i915 device info: page-sizes: 0x11000 <7> [201.766095] i915 device info: platform: COFFEELAKE <7> [201.766096] i915 device info: ppgtt-size: 48 <7> [201.766097] i915 device info: ppgtt-type: 2 <7> [201.766098] i915 device info: dma_mask_size: 39 <7> [201.766100] i915 device info: is_mobile: no <7> [201.766101] i915 device info: is_lp: no <7> [201.766102] i915 device info: require_force_probe: no <7> [201.766103] i915 device info: is_dgfx: no <7> [201.766105] i915 device info: has_64bit_reloc: yes <7> [201.766106] i915 device info: has_64k_pages: no <7> [201.766107] i915 device info: gpu_reset_clobbers_display: no <7> [201.766108] i915 device info: has_reset_engine: yes <7> [201.766110] i915 device info: has_3d_pipeline: yes <7> [201.766111] i915 device info: has_4tile: no <7> [201.766112] i915 device info: has_flat_ccs: no <7> [201.766113] i915 device info: has_global_mocs: no <7> [201.766115] i915 device info: has_gmd_id: no <7> [201.766116] i915 device info: has_gt_uc: yes <7> [201.766117] i915 device info: has_heci_pxp: no <7> [201.766118] i915 device info: has_heci_gscfi: no <7> [201.766119] i915 device info: has_guc_deprivilege: no <7> [201.766121] i915 device info: has_l3_ccs_read: no <7> [201.766122] i915 device info: has_l3_dpf: no <7> [201.766123] i915 device info: has_llc: yes <7> [201.766124] i915 device info: has_logical_ring_contexts: yes <7> [201.766126] i915 device info: has_logical_ring_elsq: no <7> [201.766127] i915 device info: has_media_ratio_mode: no <7> [201.766128] i915 device info: has_mslice_steering: no <7> [201.766129] i915 device info: has_oa_bpc_reporting: no <7> [201.766130] i915 device info: has_oa_slice_contrib_limits: no <7> [201.766132] i915 device info: has_oam: no <7> [201.766133] i915 device info: has_one_eu_per_fuse_bit: no <7> [201.766134] i915 device info: has_pxp: no <7> [201.766135] i915 device info: has_rc6: yes <7> [201.766137] i915 device info: has_rc6p: no <7> [201.766138] i915 device info: has_rps: yes <7> [201.766139] i915 device info: has_runtime_pm: yes <7> [201.766140] i915 device info: has_snoop: no <7> [201.766142] i915 device info: has_coherent_ggtt: yes <7> [201.766143] i915 device info: tuning_thread_rr_after_dep: no <7> [201.766144] i915 device info: unfenced_needs_alignment: no <7> [201.766145] i915 device info: hws_needs_physical: no <7> [201.766146] i915 device info: has_pooled_eu: no <7> [201.766148] i915 device info: cursor_needs_physical: no <7> [201.766149] i915 device info: has_cdclk_crawl: no <7> [201.766150] i915 device info: has_cdclk_squash: no <7> [201.766151] i915 device info: has_ddi: yes <7> [201.766152] i915 device info: has_dp_mst: yes <7> [201.766153] i915 device info: has_dsb: no <7> [201.766155] i915 device info: has_fpga_dbg: yes <7> [201.766156] i915 device info: has_gmch: no <7> [201.766157] i915 device info: has_hotplug: yes <7> [201.766158] i915 device info: has_hti: no <7> [201.766159] i915 device info: has_ipc: yes <7> [201.766161] i915 device info: has_overlay: no <7> [201.766162] i915 device info: has_psr: yes <7> [201.766163] i915 device info: has_psr_hw_tracking: yes <7> [201.766164] i915 device info: overlay_needs_physical: no <7> [201.766166] i915 device info: supports_tv: no <7> [201.766167] i915 device info: has_hdcp: yes <7> [201.766168] i915 device info: has_dmc: yes <7> [201.766169] i915 device info: has_dsc: no <7> [201.766170] i915 device info: rawclk rate: 24000 kHz <7> [201.766172] i915 device info: iommu: disabled <7> [201.766173] i915 device info: available engines: 40403 <7> [201.766175] i915 device info: slice total: 1, mask=0001 <7> [201.766176] i915 device info: subslice total: 3 <7> [201.766178] i915 device info: slice0: 3 subslices, mask=00000007 <7> [201.766179] i915 device info: slice1: 0 subslices, mask=00000000 <7> [201.766180] i915 device info: slice2: 0 subslices, mask=00000000 <7> [201.766181] i915 device info: EU total: 24 <7> [201.766182] i915 device info: EU per subslice: 8 <7> [201.766183] i915 device info: has slice power gating: no <7> [201.766184] i915 device info: has subslice power gating: no <7> [201.766185] i915 device info: has EU power gating: yes <6> [201.766186] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [201.766188] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [201.766189] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [201.766191] i915: Performing live selftests with st_random_seed=0x160f0dc4 st_timeout=500 <6> [201.766193] i915: Running gt_mocs <6> [201.766209] i915: Running intel_mocs_live_selftests/live_mocs_kernel <7> [201.766224] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected <7> [201.766249] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected <7> [201.766272] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] <7> [201.766289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [201.766506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] status updated from unknown to disconnected <7> [201.766532] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected <7> [201.766553] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [201.766558] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [201.766562] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [201.766565] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [201.766569] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [201.766572] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [201.766609] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [201.766619] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [201.766638] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [201.766659] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [201.767779] [drm:drm_client_modeset_probe] <7> [201.767827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [201.767847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [201.768050] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [201.768069] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [201.768085] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [201.768283] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [201.768300] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [201.768316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [201.768514] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [201.768532] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] <7> [201.768549] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [201.768876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected <7> [201.768912] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] <7> [201.768929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [201.769168] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected <7> [201.769185] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [201.769190] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [201.769194] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [201.769197] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [201.769201] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [201.769205] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [201.769235] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [201.769245] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [201.769266] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [201.769286] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [201.769347] [drm:drm_client_modeset_probe] <7> [201.769393] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [201.769411] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [201.769612] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [201.769630] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [201.769646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [201.769894] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [201.769912] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [201.769928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [201.770125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [201.770143] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] <7> [201.770159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [201.770359] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected <7> [201.770377] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] <7> [201.770393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [201.770592] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected <7> [201.770609] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [201.770613] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [201.770617] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [201.770621] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [201.770625] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [201.770628] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [201.770660] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [201.770671] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [201.770692] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [201.770722] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [201.778792] i915: Running intel_mocs_live_selftests/live_mocs_clean <6> [201.813868] i915: Running intel_mocs_live_selftests/live_mocs_reset <5> [201.814178] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs <5> [201.816076] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs <5> [201.816470] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [201.817274] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [201.817277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [201.819634] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [201.820131] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [201.820472] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [201.820478] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [201.820479] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <5> [201.821183] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs <5> [201.822134] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs <5> [201.822421] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [201.822592] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [201.822594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [201.824718] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [201.824951] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [201.825187] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [201.825192] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [201.825194] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <5> [201.826094] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs <5> [201.827000] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs <5> [201.827301] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [201.827473] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [201.827476] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [201.830016] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [201.830257] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [201.830504] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [201.830511] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [201.830514] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <5> [201.831054] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs <5> [201.831941] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs <5> [201.832200] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [201.832375] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [201.832378] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [201.834687] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [201.834964] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [201.835200] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [201.835205] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [201.835207] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [201.854795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [201.854964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [201.855127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [201.855289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [201.873910] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [201.923007] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [201.968058] i915: probe of 0000:00:02.0 failed with error -25 <6> [202.183448] [IGT] i915_selftest: finished subtest gt_mocs, SUCCESS

<6> [201.550984] [IGT] i915_selftest: starting dynamic subtest gt_mocs

<5> [201.633244] Setting dangerous option enable_guc - tainting kernel

<5> [201.633250] Setting dangerous option live_selftests - tainting kernel

<7> [201.661960] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [201.662168] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [201.662330] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [201.662339] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP)

<7> [201.662512] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [201.662740] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [201.662898] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [201.663454] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [201.663592] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [201.663734] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [201.663881] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [201.664021] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047

<7> [201.664171] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [201.664445] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018

<7> [201.664605] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [201.664769] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [201.664916] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [201.665054] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [201.668744] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [201.668903] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [201.669051] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [201.669197] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [201.669344] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [201.669485] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [201.669621] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [201.669769] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [201.669911] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [201.670039] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [201.670167] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [201.670292] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [201.670417] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [201.670545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [201.671156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [201.671320] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209

<7> [201.671483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [201.671644] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [201.671816] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [201.671979] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [201.672131] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [201.672281] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [201.672431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [201.672583] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [201.672745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [201.672905] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [201.673055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [201.673202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [201.673348] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [201.673498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [201.673648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [201.673848] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [201.674009] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [201.674160] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [201.674307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same AUX CH (0x40) as port A, disabling port A DP support

<7> [201.674454] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [201.674601] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [201.674760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [201.674918] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9

<7> [201.675066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [201.675213] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10

<7> [201.675359] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [201.675505] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10

<7> [201.675652] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [201.675807] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [201.675967] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [201.676125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [201.676304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [201.676466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [201.676619] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [201.676781] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [201.676939] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [201.677087] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [201.677277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [201.677424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [201.677570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [201.677744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [201.677928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [201.678076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [201.678224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [201.678371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [201.678544] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [201.679228] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [201.679563] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [201.679666] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [201.679871] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [201.680015] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [201.680155] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [201.680295] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [201.680432] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [201.680570] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [201.680723] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [201.680865] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [201.681004] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [201.682275] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [201.683188] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [201.683372] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not DVI/HDMI/DP compatible, respect it

<7> [201.683545] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [201.683724] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [201.683893] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [201.684195] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default)

<7> [201.684341] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [201.684478] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [201.684672] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] using AUX D (VBT)

<7> [201.684874] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D]

<7> [201.685146] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [201.685291] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D]

<7> [201.685428] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [201.685622] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] using AUX A (VBT)

<7> [201.685824] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E]

<7> [201.686012] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [201.686329] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [201.686494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [201.686654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [201.686855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [201.687002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [201.687147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [201.687293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [201.687441] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [201.687587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [201.687791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [201.687938] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [201.688084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [201.688231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [201.688377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [201.688522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [201.688663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A

<7> [201.688854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B

<7> [201.688995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C

<7> [201.689140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [201.689287] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [201.689439] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [201.689589] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [201.689795] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [201.689972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [201.690125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [201.690277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [201.690428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled

<7> [201.690578] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled

<7> [201.690774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [201.690916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [201.691057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [201.691196] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [201.691347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [201.691490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [201.691630] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [201.691822] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [201.691974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [201.692117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [201.692258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [201.692399] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [201.692579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [201.692778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [201.692929] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [201.693079] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [201.693227] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [201.693370] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [201.693510] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [201.695810] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [201.695966] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [201.696108] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [201.696253] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [201.696409] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global

<7> [201.697325] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [201.697483] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [201.697636] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [201.701527] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [201.701752] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [201.723365] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [201.723534] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [201.723682] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [201.723838] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [201.723986] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [201.724134] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000

<7> [201.724280] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [201.724427] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [201.724574] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [201.724727] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [201.724874] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [201.725022] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [201.725168] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [201.725315] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [201.725462] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [201.726478] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [201.726482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [201.732749] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [201.733383] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [201.733663] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [201.733665] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [201.733667] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [201.740750] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [201.740990] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [201.741141] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [201.741287] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [201.741432] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [201.741594] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [201.742064] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [201.742212] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [201.742355] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [201.742497] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [201.744470] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [201.744816] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [201.745100] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [201.745664] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<7> [201.745999] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event

<7> [201.746280] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [201.746838] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event

<6> [201.746884] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [201.748190] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [201.761999] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [201.763674] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input65

<7> [201.764496] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [201.764973] [drm:drm_client_modeset_probe]

<7> [201.765024] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [201.764970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [201.765047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [201.765137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [201.765255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [201.765281] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [201.765288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [201.765364] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [201.765381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [201.765460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [201.765581] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [201.765604] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [201.765626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [201.765643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [201.765908] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [201.765934] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [201.765957] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3]

<7> [201.765927] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [201.765974] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [201.766079] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9

<7> [201.766082] i915 device info: graphics version: 9

<7> [201.766083] i915 device info: media version: 9

<7> [201.766084] i915 device info: display version: 9

<7> [201.766086] i915 device info: graphics stepping: **

<7> [201.766087] i915 device info: media stepping: **

<7> [201.766088] i915 device info: display stepping: **

<7> [201.766090] i915 device info: base die stepping: **

<7> [201.766091] i915 device info: gt: 2

<7> [201.766092] i915 device info: memory-regions: 0x21

<7> [201.766093] i915 device info: page-sizes: 0x11000

<7> [201.766095] i915 device info: platform: COFFEELAKE

<7> [201.766096] i915 device info: ppgtt-size: 48

<7> [201.766097] i915 device info: ppgtt-type: 2

<7> [201.766098] i915 device info: dma_mask_size: 39

<7> [201.766100] i915 device info: is_mobile: no

<7> [201.766101] i915 device info: is_lp: no

<7> [201.766102] i915 device info: require_force_probe: no

<7> [201.766103] i915 device info: is_dgfx: no

<7> [201.766105] i915 device info: has_64bit_reloc: yes

<7> [201.766106] i915 device info: has_64k_pages: no

<7> [201.766107] i915 device info: gpu_reset_clobbers_display: no

<7> [201.766108] i915 device info: has_reset_engine: yes

<7> [201.766110] i915 device info: has_3d_pipeline: yes

<7> [201.766111] i915 device info: has_4tile: no

<7> [201.766112] i915 device info: has_flat_ccs: no

<7> [201.766113] i915 device info: has_global_mocs: no

<7> [201.766115] i915 device info: has_gmd_id: no

<7> [201.766116] i915 device info: has_gt_uc: yes

<7> [201.766117] i915 device info: has_heci_pxp: no

<7> [201.766118] i915 device info: has_heci_gscfi: no

<7> [201.766119] i915 device info: has_guc_deprivilege: no

<7> [201.766121] i915 device info: has_l3_ccs_read: no

<7> [201.766122] i915 device info: has_l3_dpf: no

<7> [201.766123] i915 device info: has_llc: yes

<7> [201.766124] i915 device info: has_logical_ring_contexts: yes

<7> [201.766126] i915 device info: has_logical_ring_elsq: no

<7> [201.766127] i915 device info: has_media_ratio_mode: no

<7> [201.766128] i915 device info: has_mslice_steering: no

<7> [201.766129] i915 device info: has_oa_bpc_reporting: no

<7> [201.766130] i915 device info: has_oa_slice_contrib_limits: no

<7> [201.766132] i915 device info: has_oam: no

<7> [201.766133] i915 device info: has_one_eu_per_fuse_bit: no

<7> [201.766134] i915 device info: has_pxp: no

<7> [201.766135] i915 device info: has_rc6: yes

<7> [201.766137] i915 device info: has_rc6p: no

<7> [201.766138] i915 device info: has_rps: yes

<7> [201.766139] i915 device info: has_runtime_pm: yes

<7> [201.766140] i915 device info: has_snoop: no

<7> [201.766142] i915 device info: has_coherent_ggtt: yes

<7> [201.766143] i915 device info: tuning_thread_rr_after_dep: no

<7> [201.766144] i915 device info: unfenced_needs_alignment: no

<7> [201.766145] i915 device info: hws_needs_physical: no

<7> [201.766146] i915 device info: has_pooled_eu: no

<7> [201.766148] i915 device info: cursor_needs_physical: no

<7> [201.766149] i915 device info: has_cdclk_crawl: no

<7> [201.766150] i915 device info: has_cdclk_squash: no

<7> [201.766151] i915 device info: has_ddi: yes

<7> [201.766152] i915 device info: has_dp_mst: yes

<7> [201.766153] i915 device info: has_dsb: no

<7> [201.766155] i915 device info: has_fpga_dbg: yes

<7> [201.766156] i915 device info: has_gmch: no

<7> [201.766157] i915 device info: has_hotplug: yes

<7> [201.766158] i915 device info: has_hti: no

<7> [201.766159] i915 device info: has_ipc: yes

<7> [201.766161] i915 device info: has_overlay: no

<7> [201.766162] i915 device info: has_psr: yes

<7> [201.766163] i915 device info: has_psr_hw_tracking: yes

<7> [201.766164] i915 device info: overlay_needs_physical: no

<7> [201.766166] i915 device info: supports_tv: no

<7> [201.766167] i915 device info: has_hdcp: yes

<7> [201.766168] i915 device info: has_dmc: yes

<7> [201.766169] i915 device info: has_dsc: no

<7> [201.766170] i915 device info: rawclk rate: 24000 kHz

<7> [201.766172] i915 device info: iommu: disabled

<7> [201.766173] i915 device info: available engines: 40403

<7> [201.766175] i915 device info: slice total: 1, mask=0001

<7> [201.766176] i915 device info: subslice total: 3

<7> [201.766178] i915 device info: slice0: 3 subslices, mask=00000007

<7> [201.766179] i915 device info: slice1: 0 subslices, mask=00000000

<7> [201.766180] i915 device info: slice2: 0 subslices, mask=00000000

<7> [201.766181] i915 device info: EU total: 24

<7> [201.766182] i915 device info: EU per subslice: 8

<7> [201.766183] i915 device info: has slice power gating: no

<7> [201.766184] i915 device info: has subslice power gating: no

<7> [201.766185] i915 device info: has EU power gating: yes

<6> [201.766186] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [201.766188] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [201.766189] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [201.766191] i915: Performing live selftests with st_random_seed=0x160f0dc4 st_timeout=500

<6> [201.766209] i915: Running intel_mocs_live_selftests/live_mocs_kernel

<7> [201.766224] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected

<7> [201.766249] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [201.766272] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2]

<7> [201.766289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [201.766506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] status updated from unknown to disconnected

<7> [201.766532] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected

<7> [201.766553] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [201.766558] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [201.766562] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [201.766565] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [201.766569] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [201.766572] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [201.766609] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [201.766619] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [201.766638] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [201.766659] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [201.767779] [drm:drm_client_modeset_probe]

<7> [201.767827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [201.767847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [201.768050] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [201.768069] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [201.768085] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [201.768283] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [201.768300] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [201.768316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [201.768514] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [201.768532] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3]

<7> [201.768549] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [201.768876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [201.768912] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2]

<7> [201.768929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [201.769168] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected

<7> [201.769185] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [201.769190] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [201.769194] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [201.769197] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [201.769201] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [201.769205] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [201.769235] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [201.769245] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [201.769266] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [201.769286] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [201.769347] [drm:drm_client_modeset_probe]

<7> [201.769393] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [201.769411] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [201.769612] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [201.769630] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [201.769646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [201.769894] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [201.769912] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [201.769928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [201.770125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [201.770143] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3]

<7> [201.770159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [201.770359] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [201.770377] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2]

<7> [201.770393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [201.770592] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected

<7> [201.770609] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [201.770613] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [201.770617] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [201.770621] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [201.770625] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [201.770628] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [201.770660] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [201.770671] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [201.770692] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [201.770722] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [201.778792] i915: Running intel_mocs_live_selftests/live_mocs_clean

<6> [201.813868] i915: Running intel_mocs_live_selftests/live_mocs_reset

<5> [201.814178] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs

<5> [201.816076] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs

<5> [201.816470] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [201.817274] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [201.817277] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [201.819634] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1183MHz, before = 1183MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [201.820131] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [201.820472] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [201.820478] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [201.820479] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<5> [201.821183] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs

<5> [201.822134] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs

<5> [201.822421] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [201.822592] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [201.822594] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [201.824718] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [201.824951] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [201.825187] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [201.825192] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [201.825194] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<5> [201.826094] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs

<5> [201.827000] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs

<5> [201.827301] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [201.827473] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [201.827476] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [201.830016] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1183MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [201.830257] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [201.830504] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [201.830511] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [201.830514] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<5> [201.831054] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs

<5> [201.831941] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs

<5> [201.832200] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [201.832375] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [201.832378] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [201.834687] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1200MHz, before = 1200MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [201.834964] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [201.835200] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [201.835205] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [201.835207] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [201.854795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [201.854964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [201.855127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [201.855289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [201.873910] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [201.923007] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [201.968058] i915: probe of 0000:00:02.0 failed with error -25

<6> [202.183448] [IGT] i915_selftest: finished subtest gt_mocs, SUCCESS

Results for igt@i915_selftest@live@gt_mocs