Results for igt@core_hotunplug@unbind-rebind

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-g621c2d311 (x86_64) (Linux: 6.4.0-linus-v6.4-g6995e2de6891+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: unbind-rebind
Opened device: /dev/dri/renderD128
Unloaded audio driver snd_hda_intel
Realoading snd_hda_intel
Subtest unbind-rebind: SUCCESS (1.662s)
Err 
Starting subtest: unbind-rebind
Subtest unbind-rebind: SUCCESS (1.662s)
Dmesg
<6> [98.492621] Console: switching to colour dummy device 80x25
<6> [98.492770] [IGT] core_hotunplug: executing
<7> [98.505012] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [98.505350] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [98.505458] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [98.506479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.509486] [IGT] core_hotunplug: closing selected device instance
<7> [98.509761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.510480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.511715] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.511879] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [98.512035] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.512192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [98.512351] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.512511] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [98.512677] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.512903] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [98.513074] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.513245] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [98.513422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.513594] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.513773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<6> [98.515428] [IGT] core_hotunplug: starting subtest unbind-rebind
<7> [98.524065] [IGT] core_hotunplug: reopening DRM device for health check
<7> [98.524088] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [98.524378] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [98.530720] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [98.530835] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [98.531032] [IGT] core_hotunplug: closing health checked device instance
<7> [98.531305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.531616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.532842] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.532960] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [98.533068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.533174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [98.533278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.533385] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [98.533491] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.533603] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [98.533715] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.533822] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [98.533926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.534025] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.534118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.535666] [IGT] core_hotunplug: reopening render device for health check
<7> [98.535687] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [98.536048] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [98.542211] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [98.542388] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [98.542587] [IGT] core_hotunplug: closing health checked device instance
<7> [98.542814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.544295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.545492] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.545603] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [98.545717] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.545825] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [98.545934] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.546038] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [98.546141] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.546249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [98.546354] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.546461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [98.546563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.546662] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.546762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.663347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.664064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.665286] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.665393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [98.665494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.665593] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [98.665701] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.665805] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [98.665906] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.666009] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [98.666106] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.666205] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [98.666289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.666377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [98.666527] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7> [98.679033] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [98.679142] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [98.679236] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [98.679328] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [98.679416] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [98.679504] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [98.679591] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [98.679679] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [98.679784] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [98.679872] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [98.679961] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [98.680048] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [98.680132] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [98.680218] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [98.680304] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [98.680391] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [98.680477] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [98.680563] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [98.680648] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [98.680746] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [98.680835] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [98.680923] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [98.681011] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [98.681099] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [98.681188] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [98.681277] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [98.681365] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [98.681453] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [98.681540] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [98.681628] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [98.681730] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [98.681820] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [98.681906] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [98.681993] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [98.682080] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [98.682170] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [98.682833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [98.682993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [98.683088] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)
<7> [98.683173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [98.683266] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [98.683352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [98.750378] [IGT] core_hotunplug: unbinding the driver from the device
<7> [98.750573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.751682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [98.752957] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.753364] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [98.753815] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.754238] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [98.754655] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.755136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [98.755537] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.755993] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [98.756404] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.756875] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [98.757276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.757668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [98.758288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4
<7> [98.758676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5
<7> [98.786259] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]
<7> [98.848729] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper
<7> [98.849047] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind
<7> [98.927897] [IGT] core_hotunplug: rebinding the driver to the device
<7> [98.928922] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K
<7> [98.929080] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)
<7> [98.929232] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH
<7> [98.929352] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7> [98.929526] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 19200 kHz
<7> [98.929613] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005
<7> [98.929708] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001
<7> [98.930367] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [98.930455] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [98.930535] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M
<6> [98.930613] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6> [98.930641] i915 0000:00:02.0: vgaarb: deactivate vga console
<6> [98.930945] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7> [98.930960] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000021200087
<7> [98.931074] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K
<7> [98.931496] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x16a0b018
<7> [98.931642] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0
<7> [98.931781] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [98.931895] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [98.932008] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7> [98.932135] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)
<7> [98.932264] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4
<7> [98.932346] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no
<7> [98.932422] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=4801 tRP=39 tRDPRE=17 tRAS=76 tRCD=39 tRC=115
<7> [98.932568] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32
<7> [98.932718] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=48
<7> [98.932861] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=64
<7> [98.933005] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=15471
<7> [98.933147] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133
<7> [98.933295] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=51200
<7> [98.933448] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=68267
<7> [98.933600] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21375
<7> [98.933763] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133
<7> [98.933909] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=51200
<7> [98.934060] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=68267
<7> [98.934214] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=26415
<7> [98.934372] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133
<7> [98.934537] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=51200
<7> [98.934713] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=68267
<7> [98.934885] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29946
<7> [98.935053] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133
<7> [98.935220] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=51200
<7> [98.935393] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=68267
<7> [98.935562] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=32092
<7> [98.935651] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133
<7> [98.935743] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=51200
<7> [98.935830] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=68267
<7> [98.935917] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=33283
<7> [98.936005] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133
<7> [98.936093] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=51200
<7> [98.936181] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=68267
<7> [98.936540] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [98.936626] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 250
<7> [98.936724] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)
<7> [98.936813] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)
<7> [98.936903] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)
<7> [98.936991] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7> [98.937078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 812, min size 812)
<7> [98.937165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)
<7> [98.937251] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers
<7> [98.937341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7> [98.937429] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)
<7> [98.937516] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)
<7> [98.937605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78)
<7> [98.937700] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)
<7> [98.937789] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)
<7> [98.937876] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [98.937963] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [98.938049] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7> [98.938140] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [98.938228] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [98.938314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [98.938401] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [98.938490] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [98.938578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same DDC pin (0xa) as port A, disabling port A DVI/HDMI support
<7> [98.938666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [98.938763] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0
<7> [98.938851] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [98.938939] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0
<7> [98.939025] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI max TMDS clock: 297000 kHz
<7> [98.939112] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [98.939199] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0
<7> [98.939286] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [98.939373] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0
<7> [98.939462] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [98.939550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0
<7> [98.939638] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a
<7> [98.939738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [98.939872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.939976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [98.940077] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.940177] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [98.940278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.940379] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [98.940479] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.940581] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [98.940681] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.940791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [98.940877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [98.940972] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [98.941069] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [98.941190] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.
<7> [98.941284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [98.941371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [98.941459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [98.941573] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.941678] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [98.941788] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.941888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [98.941988] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.942089] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [98.942190] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.942293] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [98.942394] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [98.942493] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [98.942580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [98.942667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [98.942768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4
<7> [98.942855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5
<7> [98.943018] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adls_dmc_ver2_01.bin
<7> [98.943789] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<6> [98.944911] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1)
<7> [98.945089] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 20 us
<7> [98.945181] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)
<7> [98.945261] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 22 (22.0 usec)
<7> [98.945339] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 33 (33.0 usec)
<7> [98.945417] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 33 (33.0 usec)
<7> [98.945492] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec)
<7> [98.945569] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 48 (48.0 usec)
<7> [98.945645] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 101 (101.0 usec)
<7> [98.945740] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 147 (147.0 usec)
<7> [98.947228] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 2 display pipes available.
<7> [98.948057] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [98.948168] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind
<6> [98.948258] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
<7> [98.948319] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz
<7> [98.948411] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 1305600 kHz
<7> [98.948514] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT)
<7> [98.948600] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A]
<7> [98.948699] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2
<7> [98.948786] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2
<7> [98.948875] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless
<7> [98.948967] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7> [98.949055] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300
<7> [98.949142] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002
<7> [98.949234] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName
<7> [98.949323] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz
<7> [98.949410] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7> [98.949510] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0
<7> [98.949658] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000
<7> [98.949743] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7> [98.949815] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7> [98.949885] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
<7> [98.949953] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7> [98.950104] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7> [98.950210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [98.950429] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on
<7> [98.950521] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle
<7> [98.950641] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [98.950737] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [98.950859] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [98.950942] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled
<7> [99.182697] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.211696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.240695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.269695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.298696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.327696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.356696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.385695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.414696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.443696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.472695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.501695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.530696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.559696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.588695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.617696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.646696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.675697] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.704695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.733695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.762696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.791696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.820695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.849695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.878696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.907696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.936695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.965695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [99.994696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [100.023696] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [100.052695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [100.081695] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [100.081788] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110
<6> [100.081800] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP
<7> [100.081828] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off
<7> [100.081956] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [100.082032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [100.082197] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI TC1/PHY B] using AUX D (VBT)
<7> [100.082296] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI TC1/PHY B]
<7> [100.082517] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI TC1/PHY B]
<7> [100.082589] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI TC1/PHY B] Using DDC pin 0x9 (VBT)
<7> [100.082726] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:150:DDI TC2/PHY C] using AUX E (VBT)
<7> [100.082806] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:150:DDI TC2/PHY C]
<7> [100.082970] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:150:DDI TC2/PHY C]
<7> [100.083041] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:150:DDI TC2/PHY C] Using DDC pin 0xa (VBT)
<7> [100.083144] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:160:DDI TC3/PHY D] using AUX F (VBT)
<7> [100.083219] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:160:DDI TC3/PHY D]
<7> [100.083375] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:160:DDI TC3/PHY D]
<7> [100.083444] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:160:DDI TC3/PHY D] Using DDC pin 0xb (VBT)
<7> [100.083551] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:170:DDI TC4/PHY E] using AUX G (VBT)
<7> [100.083627] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:170:DDI TC4/PHY E]
<7> [100.083785] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:170:DDI TC4/PHY E]
<7> [100.083859] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:170:DDI TC4/PHY E] Using DDC pin 0xc (VBT)
<7> [100.084205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled
<7> [100.084316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled
<7> [100.084397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [100.084477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A
<7> [100.084556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A
<7> [100.084636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A
<7> [100.084725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A
<7> [100.084809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A
<7> [100.084891] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B
<7> [100.084974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B
<7> [100.085058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B
<7> [100.085137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B
<7> [100.085217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B
<7> [100.085297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B
<7> [100.085379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI TC1/PHY B] hw state readout: disabled, pipe A
<7> [100.085455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A
<7> [100.085533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B
<7> [100.085614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DDI TC2/PHY C] hw state readout: disabled, pipe A
<7> [100.085696] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:152:DP-MST A] hw state readout: disabled, pipe A
<7> [100.085773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:153:DP-MST B] hw state readout: disabled, pipe B
<7> [100.085859] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:160:DDI TC3/PHY D] hw state readout: disabled, pipe A
<7> [100.085940] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:162:DP-MST A] hw state readout: disabled, pipe A
<7> [100.086020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:163:DP-MST B] hw state readout: disabled, pipe B
<7> [100.086102] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:170:DDI TC4/PHY E] hw state readout: disabled, pipe A
<7> [100.086179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:172:DP-MST A] hw state readout: disabled, pipe A
<7> [100.086254] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:173:DP-MST B] hw state readout: disabled, pipe B
<7> [100.086336] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [100.086422] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [100.086507] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [100.086591] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [100.086715] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-1] hw state readout: disabled
<7> [100.086807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:145:HDMI-A-1] hw state readout: disabled
<7> [100.086895] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:151:DP-2] hw state readout: disabled
<7> [100.086981] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:157:HDMI-A-2] hw state readout: disabled
<7> [100.087065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:161:DP-3] hw state readout: disabled
<7> [100.087149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:167:HDMI-A-3] hw state readout: disabled
<7> [100.087233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:171:DP-4] hw state readout: disabled
<7> [100.087317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:177:HDMI-A-4] hw state readout: disabled
<7> [100.087392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz
<7> [100.087470] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz
<7> [100.087550] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz
<7> [100.087626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz
<7> [100.087710] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz
<7> [100.087788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz
<7> [100.087867] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0
<7> [100.087957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz
<7> [100.088036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz
<7> [100.088110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz
<7> [100.088185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz
<7> [100.088263] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz
<7> [100.088341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz
<7> [100.088419] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0
<7> [100.088555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]
<7> [100.088642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]
<7> [100.088738] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [100.088819] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [100.093891] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K)
<7> [100.093993] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture
<7> [100.094061] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]
<7> [100.094134] MCR Steering: Default steering: group=0x0, instance=0x0
<7> [100.094141] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global
<7> [100.094660] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 10 engine workarounds on rcs'0
<7> [100.094762] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0
<7> [100.094846] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0
<7> [100.095429] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0
<7> [100.095515] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0
<7> [100.095595] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0
<7> [100.095832] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0
<7> [100.095909] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0
<7> [100.096127] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2
<7> [100.096207] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2
<7> [100.096423] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0
<7> [100.096504] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0
<7> [100.097651] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7> [100.097787] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset
<7> [100.112262] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f
<7> [100.112386] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000
<7> [100.112489] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4
<7> [100.112577] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7> [100.112666] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8
<7> [100.112763] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0xa7800004
<7> [100.112853] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7> [100.112941] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7> [100.113029] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7> [100.113117] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7> [100.113204] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7> [100.113292] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7> [100.113380] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7> [100.113468] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<7> [100.113555] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no
<6> [100.114906] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.5.1
<6> [100.114909] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
<7> [100.117370] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1350MHz, before = 1350MHz, status = 0x8002F0EC, count = 0, ret = 0
<7> [100.117685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6> [100.118552] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!
<6> [100.119443] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [100.119445] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<6> [100.119998] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
<7> [100.123216] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping
<7> [100.123327] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping
<7> [100.123412] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
<7> [100.123504] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [100.123847] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0
<7> [100.123913] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0
<7> [100.123974] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0
<7> [100.124034] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1
<7> [100.124094] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0
<7> [100.126611] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY B bus for card0-DP-1
<7> [100.127192] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-1] generating connector hotplug event
<7> [100.127384] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:145:HDMI-A-1] generating connector hotplug event
<7> [100.127556] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY C bus for card0-DP-2
<7> [100.127918] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:151:DP-2] generating connector hotplug event
<7> [100.128089] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:157:HDMI-A-2] generating connector hotplug event
<7> [100.128275] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY D bus for card0-DP-3
<7> [100.128606] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:161:DP-3] generating connector hotplug event
<7> [100.128787] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:167:HDMI-A-3] generating connector hotplug event
<7> [100.128956] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY E bus for card0-DP-4
<7> [100.129284] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:171:DP-4] generating connector hotplug event
<7> [100.129448] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:177:HDMI-A-4] generating connector hotplug event
<6> [100.129473] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
<7> [100.130587] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 8 outputs detected
<6> [100.147734] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [100.149891] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
<7> [100.150480] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [100.150780] [drm:drm_client_modeset_probe]
<7> [100.150806] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]
<7> [100.150780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [100.150820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]
<7> [100.150886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [100.151038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [100.151145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.151204] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
<7> [100.151241] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.151296] i915 device info: pciid=0xa780 rev=0x04 platform=ALDERLAKE_S (subplatform=0x1) gen=12
<7> [100.151298] i915 device info: graphics version: 12
<7> [100.151299] i915 device info: media version: 12
<7> [100.151300] i915 device info: display version: 12
<7> [100.151301] i915 device info: graphics stepping: D0
<7> [100.151302] i915 device info: media stepping: D0
<7> [100.151302] i915 device info: display stepping: D0
<7> [100.151303] i915 device info: base die stepping: **
<7> [100.151304] i915 device info: gt: 0
<7> [100.151305] i915 device info: memory-regions: 0x21
<7> [100.151306] i915 device info: page-sizes: 0x211000
<7> [100.151307] i915 device info: platform: ALDERLAKE_S
<7> [100.151308] i915 device info: ppgtt-size: 48
<7> [100.151309] i915 device info: ppgtt-type: 2
<7> [100.151310] i915 device info: dma_mask_size: 39
<7> [100.151310] i915 device info: is_mobile: no
<7> [100.151311] i915 device info: is_lp: no
<7> [100.151312] i915 device info: require_force_probe: no
<7> [100.151313] i915 device info: is_dgfx: no
<7> [100.151314] i915 device info: has_64bit_reloc: yes
<7> [100.151315] i915 device info: has_64k_pages: no
<7> [100.151316] i915 device info: gpu_reset_clobbers_display: no
<7> [100.151316] i915 device info: has_reset_engine: yes
<7> [100.151317] i915 device info: has_3d_pipeline: yes
<7> [100.151318] i915 device info: has_4tile: no
<7> [100.151319] i915 device info: has_flat_ccs: no
<7> [100.151320] i915 device info: has_global_mocs: yes
<7> [100.151320] i915 device info: has_gmd_id: no
<7> [100.151321] i915 device info: has_gt_uc: yes
<7> [100.151322] i915 device info: has_heci_pxp: no
<7> [100.151323] i915 device info: has_heci_gscfi: no
<7> [100.151324] i915 device info: has_guc_deprivilege: no
<7> [100.151324] i915 device info: has_l3_ccs_read: no
<7> [100.151325] i915 device info: has_l3_dpf: no
<7> [100.151333] i915 device info: has_llc: yes
<7> [100.151334] i915 device info: has_logical_ring_contexts: yes
<7> [100.151335] i915 device info: has_logical_ring_elsq: yes
<7> [100.151336] i915 device info: has_media_ratio_mode: no
<7> [100.151337] i915 device info: has_mslice_steering: no
<7> [100.151338] i915 device info: has_oa_bpc_reporting: no
<7> [100.151339] i915 device info: has_oa_slice_contrib_limits: no
<7> [100.151340] i915 device info: has_oam: no
<7> [100.151341] i915 device info: has_one_eu_per_fuse_bit: no
<7> [100.151342] i915 device info: has_pxp: yes
<7> [100.151343] i915 device info: has_rc6: yes
<7> [100.151344] i915 device info: has_rc6p: no
<7> [100.151345] i915 device info: has_rps: yes
<7> [100.151346] i915 device info: has_runtime_pm: yes
<7> [100.151347] i915 device info: has_snoop: no
<7> [100.151348] i915 device info: has_coherent_ggtt: no
<7> [100.151349] i915 device info: tuning_thread_rr_after_dep: no
<7> [100.151350] i915 device info: unfenced_needs_alignment: no
<7> [100.151351] i915 device info: hws_needs_physical: no
<7> [100.151352] i915 device info: has_pooled_eu: no
<7> [100.151353] i915 device info: cursor_needs_physical: no
<7> [100.151354] i915 device info: has_cdclk_crawl: no
<7> [100.151355] i915 device info: has_cdclk_squash: no
<7> [100.151356] i915 device info: has_ddi: yes
<7> [100.151357] i915 device info: has_dp_mst: yes
<7> [100.151358] i915 device info: has_dsb: yes
<7> [100.151359] i915 device info: has_fpga_dbg: yes
<7> [100.151360] i915 device info: has_gmch: no
<7> [100.151361] i915 device info: has_hotplug: yes
<7> [100.151362] i915 device info: has_hti: yes
<7> [100.151363] i915 device info: has_ipc: yes
<7> [100.151364] i915 device info: has_overlay: no
<7> [100.151365] i915 device info: has_psr: yes
<7> [100.151366] i915 device info: has_psr_hw_tracking: no
<7> [100.151367] i915 device info: overlay_needs_physical: no
<7> [100.151368] i915 device info: supports_tv: no
<7> [100.151369] i915 device info: has_hdcp: yes
<7> [100.151370] i915 device info: has_dmc: yes
<7> [100.151371] i915 device info: has_dsc: yes
<7> [100.151329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.151372] i915 device info: rawclk rate: 19200 kHz
<7> [100.151374] i915 device info: iommu: enabled
<7> [100.151375] i915 device info: available engines: 41403
<7> [100.151376] i915 device info: slice total: 1, mask=0001
<7> [100.151377] i915 device info: subslice total: 2
<7> [100.151378] i915 device info: slice0: 2 subslices, mask=00000003
<7> [100.151379] i915 device info: EU total: 32
<7> [100.151380] i915 device info: EU per subslice: 16
<7> [100.151381] i915 device info: has slice power gating: yes
<7> [100.151382] i915 device info: has subslice power gating: no
<7> [100.151383] i915 device info: has EU power gating: no
<6> [100.151384] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6> [100.151385] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6> [100.151385] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<7> [100.152546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.153742] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)
<7> [100.153867] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] status updated from unknown to disconnected
<7> [100.153887] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected
<7> [100.153901] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]
<7> [100.153914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]
<7> [100.154983] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] status updated from unknown to disconnected
<7> [100.154996] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected
<7> [100.155007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]
<7> [100.155016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]
<7> [100.156147] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] status updated from unknown to disconnected
<7> [100.156159] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected
<7> [100.156170] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]
<7> [100.156178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]
<7> [100.157336] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] status updated from unknown to disconnected
<7> [100.157347] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected
<7> [100.157358] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]
<7> [100.157367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]
<7> [100.158529] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] status updated from unknown to disconnected
<7> [100.158540] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected
<7> [100.158551] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]
<7> [100.158562] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]
<7> [100.159729] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] status updated from unknown to disconnected
<7> [100.159740] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected
<7> [100.159754] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]
<7> [100.159764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]
<7> [100.160918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.161163] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] status updated from unknown to disconnected
<7> [100.161179] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected
<7> [100.161191] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]
<7> [100.161200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]
<7> [100.161336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.162137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.162242] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] status updated from unknown to disconnected
<7> [100.162254] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected
<7> [100.162266] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [100.162271] [drm:drm_client_modeset_probe] connector 134 enabled? no
<7> [100.162274] [drm:drm_client_modeset_probe] connector 145 enabled? no
<7> [100.162276] [drm:drm_client_modeset_probe] connector 151 enabled? no
<7> [100.162280] [drm:drm_client_modeset_probe] connector 157 enabled? no
<7> [100.162282] [drm:drm_client_modeset_probe] connector 161 enabled? no
<7> [100.162285] [drm:drm_client_modeset_probe] connector 167 enabled? no
<7> [100.162286] [drm:drm_client_modeset_probe] connector 171 enabled? no
<7> [100.162289] [drm:drm_client_modeset_probe] connector 177 enabled? no
<7> [100.162313] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [100.162319] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [100.162329] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [100.162341] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [100.162586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.162685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<6> [100.162793] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
<7> [100.163351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.163470] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.163580] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [100.163682] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.163800] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [100.163900] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.164006] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [100.164106] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.164210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [100.164313] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.164417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [100.164519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.164611] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.164707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.165899] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.166090] [drm:drm_client_modeset_probe]
<7> [100.166139] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]
<6> [100.166143] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
<7> [100.166154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]
<7> [100.166364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.166453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.167148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.168309] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.168417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [100.168517] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.168617] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [100.168723] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.168824] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [100.168923] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.169024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [100.169123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [100.169221] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [100.169308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.169428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [100.169587] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected
<7> [100.169598] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]
<7> [100.169596] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7> [100.169607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]
<7> [100.169727] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected
<7> [100.169737] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]
<7> [100.169746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]
<7> [100.169848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected
<7> [100.169857] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]
<7> [100.169865] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]
<7> [100.169969] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected
<7> [100.169978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]
<7> [100.169986] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]
<7> [100.170088] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected
<7> [100.170097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]
<7> [100.170105] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]
<7> [100.170205] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected
<7> [100.170213] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]
<7> [100.170221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]
<7> [100.170322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected
<7> [100.170331] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]
<7> [100.170340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]
<7> [100.170440] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected
<7> [100.170448] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [100.170450] [drm:drm_client_modeset_probe] connector 134 enabled? no
<7> [100.170452] [drm:drm_client_modeset_probe] connector 145 enabled? no
<7> [100.170453] [drm:drm_client_modeset_probe] connector 151 enabled? no
<7> [100.170454] [drm:drm_client_modeset_probe] connector 157 enabled? no
<7> [100.170456] [drm:drm_client_modeset_probe] connector 161 enabled? no
<7> [100.170457] [drm:drm_client_modeset_probe] connector 167 enabled? no
<7> [100.170459] [drm:drm_client_modeset_probe] connector 171 enabled? no
<7> [100.170460] [drm:drm_client_modeset_probe] connector 177 enabled? no
<7> [100.170475] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [100.170479] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [100.170488] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [100.170498] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [100.170532] [drm:drm_client_modeset_probe]
<7> [100.170556] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]
<7> [100.170567] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]
<7> [100.170701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected
<7> [100.170710] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]
<7> [100.170719] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]
<7> [100.170849] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected
<7> [100.170857] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]
<7> [100.170865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]
<7> [100.170970] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected
<7> [100.170978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]
<7> [100.170985] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]
<7> [100.171088] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected
<7> [100.171097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]
<7> [100.171105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]
<7> [100.171205] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected
<7> [100.171214] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]
<7> [100.171222] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]
<7> [100.171323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected
<7> [100.171332] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]
<7> [100.171340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]
<7> [100.171441] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected
<7> [100.171449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]
<7> [100.171457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]
<7> [100.171562] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected
<7> [100.171571] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [100.171572] [drm:drm_client_modeset_probe] connector 134 enabled? no
<7> [100.171574] [drm:drm_client_modeset_probe] connector 145 enabled? no
<7> [100.171575] [drm:drm_client_modeset_probe] connector 151 enabled? no
<7> [100.171577] [drm:drm_client_modeset_probe] connector 157 enabled? no
<7> [100.171578] [drm:drm_client_modeset_probe] connector 161 enabled? no
<7> [100.171579] [drm:drm_client_modeset_probe] connector 167 enabled? no
<7> [100.171581] [drm:drm_client_modeset_probe] connector 171 enabled? no
<7> [100.171582] [drm:drm_client_modeset_probe] connector 177 enabled? no
<7> [100.171597] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [100.171601] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [100.171609] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [100.171619] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [100.172330] [IGT] core_hotunplug: reopening DRM device for health check
<7> [100.172360] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [100.172659] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [100.174609] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [100.174739] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [100.174969] [IGT] core_hotunplug: closing health checked device instance
<7> [100.175167] [IGT] core_hotunplug: reopening render device for health check
<7> [100.175185] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [100.175484] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [100.176789] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [100.176952] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [100.177162] [IGT] core_hotunplug: closing health checked device instance
<6> [100.177253] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS
<6> [100.177597] [IGT] core_hotunplug: exiting, ret=0
<6> [100.191543] snd_hda_codec_realtek hdaudioC0D0: ALC711: SKU not ready 0x00000000
<6> [100.192046] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC711: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
<6> [100.192049] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<6> [100.192050] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
<6> [100.192052] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
<6> [100.192053] snd_hda_codec_realtek hdaudioC0D0: inputs:
<6> [100.192054] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13
<6> [100.192055] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
<6> [100.192056] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
Created at 2023-06-26 09:03:30