Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-gb7d168f61 (x86_64) (Linux: 6.4.0-rc7-linus-v6.4-rc7-g45a3e24f65e9+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.165s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.165s)
Dmesg
<6> [78.293518] Console: switching to colour dummy device 80x25
<6> [78.293567] [IGT] kms_force_connector_basic: executing
<7> [78.303041] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [78.303477] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [78.303660] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [78.304190] [drm:status_store] [CONNECTOR:113:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [78.304197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.304214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.304355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.305469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.305599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.306893] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.307419] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.307426] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.307595] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.338009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.338014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.338144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.338291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [78.338329] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.338340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.338474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.339637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.340113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.340906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.341927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.341944] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.342097] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.368292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.368297] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.368424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.368569] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [78.368601] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.368612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.368774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.370482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.370644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.371390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.371911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.371928] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.372079] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.397814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.397832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.397957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.398102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<6> [78.398157] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [78.398309] [drm:status_store] [CONNECTOR:113:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [78.398314] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.398327] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.398496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.400178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.400346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.401553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.402112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.402124] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.402303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.429652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.429661] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.429854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.430082] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from disconnected to connected
<7> [78.430253] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] probed modes :
<7> [78.430266] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [78.430271] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [78.430287] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [78.430290] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [78.430294] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [78.430324] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.430335] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.430531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.431684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.431904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.432674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.433228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.433240] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.433430] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.462975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.463000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.463143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.463350] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] probed modes :
<7> [78.463363] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [78.463367] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [78.463370] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [78.463373] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [78.463376] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [78.463502] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:113:HDMI-A-1] EDID override set
<7> [78.463519] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.463531] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.463661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.463879] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:113:HDMI-A-1] ELD monitor IGT
<7> [78.463884] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:113:HDMI-A-1] ELD size 24, SAD count 0
<7> [78.464840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [78.464995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.465722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [78.466250] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [78.466261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.466501] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [78.466506] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [78.466511] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [78.466515] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [78.466520] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] probed modes :
<7> [78.466531] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [78.466535] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [78.466538] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [78.466541] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [78.466544] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [78.466547] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [78.466648] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:113:HDMI-A-1] EDID override set
<7> [78.466670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.466682] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.466832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.467028] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:113:HDMI-A-1] ELD monitor IGT
<7> [78.467032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:113:HDMI-A-1] ELD size 24, SAD count 0
<7> [78.467036] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:113:HDMI-A-1] EDID changed, epoch counter 4
<7> [78.468485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [78.468642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.469391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [78.469902] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [78.469912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.470151] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [78.470156] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [78.470161] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] probed modes :
<7> [78.470173] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [78.470176] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [78.470180] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [78.470183] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [78.470186] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [78.470274] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:113:HDMI-A-1] EDID override reset
<7> [78.470293] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.470305] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.470443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.471601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.471733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.472675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.473174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.473182] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.473306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.498479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.498487] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.498612] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:113:HDMI-A-1] EDID changed, epoch counter 5
<7> [78.498621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.498866] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [78.498871] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [78.498876] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [78.498879] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [78.498885] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] probed modes :
<7> [78.498896] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [78.498900] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [78.498903] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [78.498906] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [78.498908] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [78.499050] [drm:status_store] [CONNECTOR:113:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [78.499056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.499068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.499202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.500295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.500421] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.501146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.501634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.501637] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.501792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.530737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.530742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.530917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.531104] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from connected to disconnected
<7> [78.531124] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [78.531250] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.531262] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.531414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.532253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.532435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.533197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.533728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.533733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.533952] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.562496] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.562501] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.562634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.562799] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<6> [78.562912] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [78.562984] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [78.563353] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:DP-1] EDID override reset
<7> [78.563371] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [78.563385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [78.563521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.564044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.564215] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [78.564310] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:107:DP-2] EDID override reset
<7> [78.564326] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [78.564338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [78.564476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.565005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [78.565471] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [78.566057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [78.567320] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [78.568242] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [78.568989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [78.569154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [78.569302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [78.569462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [78.570087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.570274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [78.570415] [drm:status_store] [CONNECTOR:113:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [78.570421] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.570433] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.570568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.571665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.571829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.572554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.573096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.573100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.573237] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.602740] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.602753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.602882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.603031] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [78.603069] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.603081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.603213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.604810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.604950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.605680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.606703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.606706] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.606878] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.633678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.633682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.633847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.634070] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [78.634184] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:113:HDMI-A-1] EDID override reset
<7> [78.634200] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.634212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.634348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.635474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.635601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.636302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.636837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.636841] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.636982] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.662126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.662130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.662267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.662410] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<6> [78.662660] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [78.662813] [drm:status_store] [CONNECTOR:113:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [78.662819] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.662832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.662984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.664147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.664694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.665441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.666475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.666479] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.666604] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.695556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.695560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.695684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.695882] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [78.696115] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [78.696592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.696736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [78.697224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [78.697845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [78.698005] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [78.698148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [78.698751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.698993] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]
<7> [78.699004] [drm:drm_client_modeset_probe]
<7> [78.699035] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [78.699048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [78.699184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.699690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.699881] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [78.699909] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [78.699920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [78.700087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.700578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [78.701119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [78.701656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [78.702978] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [78.704070] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [78.704862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [78.705038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [78.705186] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [78.705328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [78.705949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.706113] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [78.706126] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [78.706137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [78.706274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.707378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.707505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [78.708247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [78.708729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.708733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [78.708897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [78.737905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [78.737909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [78.738036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.738185] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [78.738198] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [78.738201] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [78.738203] [drm:drm_client_modeset_probe] connector 107 enabled? no
<7> [78.738205] [drm:drm_client_modeset_probe] connector 113 enabled? no
<7> [78.738229] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [78.738236] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [78.738403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.738545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [78.739005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [78.739584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [78.739731] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [78.739955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [78.740622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [78.741399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.741542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [78.742013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [78.742570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [78.742716] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [78.742904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [78.743550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [78.743810] Console: switching to colour frame buffer device 128x48
<7> [78.743999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [78.744140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [78.744586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [78.745221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [78.745409] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [78.745553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [78.746186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2023-06-18 23:06:05