igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.4-rc7 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gb7d168f61 (x86_64) (Linux: 6.4.0-rc7-linus-v6.4-rc7-g45a3e24f65e9+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa2d/0xd10 [i915] intel_atomic_commit+0x380/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_dmc_debugfs_status_show+0x3b/0x440 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xa9/0x2f0 ksys_read+0x64/0xe0 do_syscall_64+0x3f/0x90 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_dmc_debugfs_status_show+0x340/0x440 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xa9/0x2f0 Wakeref count: 0 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa2d/0xd10 [i915] intel_atomic_commit+0x380/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 Subtest module-reload: SUCCESS (26.183s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (26.183s)
Dmesg	<6> [140.075599] [IGT] i915_pm_rpm: executing <7> [140.082550] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [140.083207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [140.083225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [140.083515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [140.083713] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [140.083873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [140.084475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.084771] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [140.084848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [140.084860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [140.085048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.085549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [140.086072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [140.086621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [140.088117] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [140.089048] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [140.089789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [140.090056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [140.090202] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [140.090344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [140.091497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.091650] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [140.091713] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [140.091725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [140.091878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.093215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [140.093351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [140.094527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [140.095097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [140.095103] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.095236] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [140.120428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [140.120433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [140.120558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.120703] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [140.124211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [140.124227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [140.124370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.124887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.125076] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [140.125481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [140.125493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [140.125633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.126127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [140.126650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [140.127206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [140.128317] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [140.129413] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [140.130184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [140.130359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [140.130504] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [140.130646] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [140.131262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.131418] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [140.131885] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [140.131898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [140.132033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.133618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [140.133762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [140.134462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [140.135502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [140.135506] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.135631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [140.161920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [140.161924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [140.162049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.162193] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [140.162487] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [140.162499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [140.162650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.163146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.163329] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [140.163354] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [140.163380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [140.163527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.164019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [140.164522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [140.165107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [140.166221] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [140.167280] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [140.168040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [140.168204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [140.168352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [140.168499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [140.169124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.169281] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [140.169307] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [140.169318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [140.169481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.170665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [140.171196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [140.172420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [140.172991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [140.172997] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.173129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [140.198269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [140.198273] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [140.198400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.198544] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [151.243610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [151.251859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [151.276858] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [151.286235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [151.287125] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [151.287614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.288892] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [151.289023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.289726] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [151.290486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.291050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [151.291988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [151.292716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [151.293100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [151.293456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [151.294291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.294681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [151.295467] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [151.297765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [151.322257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [151.327763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [151.327963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.328130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [151.328600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [151.329182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [151.329391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [151.329600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [151.330285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.330486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [151.330870] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [151.330895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [151.334082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [151.357527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [151.362705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [151.362936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.363533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [151.364205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [151.364797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [151.366778] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [151.367461] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [151.367993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [151.368409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [151.368640] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [151.368890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [151.369582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.369871] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [151.369898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [151.370111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.371671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [151.371858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [151.372567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [151.373091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [151.373099] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [151.373243] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [151.397352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [151.397357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [151.397481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.397631] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [151.397672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [151.400479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [151.424913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [151.429776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [151.429979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.430141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [151.430610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [151.431192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [151.431411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [151.431592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [151.432252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.432491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [151.433128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [151.435766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [151.460191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [151.465019] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [151.465215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.465769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.465985] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [151.466008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [151.466182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.466703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [151.467215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [151.467809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [151.469137] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [151.469975] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [151.470774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [151.470957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [151.471116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [151.471270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [151.471902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.472077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [151.472093] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [151.472237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.473289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [151.473426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [151.474133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [151.474647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [151.474653] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [151.474792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [151.499920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [151.499925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [151.500056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.500207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [151.500226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [151.500361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.500902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.501073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [151.501087] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [151.501221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.501699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [151.502232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [151.502834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [151.503950] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [151.504792] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [151.505554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [151.505722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [151.505899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [151.506050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [151.506656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.506864] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [151.506881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [151.507014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.508126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [151.508613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [151.509802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [151.510332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [151.510336] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [151.510464] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [151.535054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [151.535059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [151.535196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.535344] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [151.535359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [151.541178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [151.635810] [IGT] i915_pm_rpm: starting subtest module-reload <7> [151.749819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [151.756358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [151.757003] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [151.757303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.758274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [151.758904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [151.759515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [151.759924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [151.760204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [151.760517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [151.760799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [151.761112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [151.761496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [151.762859] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [151.763608] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [151.764159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [151.764250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [151.764864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [151.765091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [151.765590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [151.765901] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [151.765909] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [151.766131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [151.770821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [151.770827] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [151.770967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [151.793717] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [151.841253] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [152.235371] [IGT] Reloading i915 w/o display <7> [152.422277] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [152.422515] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [152.422696] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [152.422997] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [152.423269] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [152.423480] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [152.424295] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [152.424447] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [152.424592] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [152.424735] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [152.424739] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [152.425140] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [152.425155] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [152.425319] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [152.425619] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [152.425863] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [152.426016] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [152.426166] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [152.426315] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [152.430487] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [152.430658] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [152.430875] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [152.431078] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [152.431248] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [152.431409] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [152.431548] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [152.431686] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [152.431872] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [152.432020] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [152.432158] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [152.432296] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [152.432432] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [152.432568] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [152.433115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [152.433308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [152.433492] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [152.433671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [152.433903] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [152.434075] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [152.434279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [152.434443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [152.434608] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [152.434821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [152.435029] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [152.435195] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [152.435359] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [152.435520] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [152.435682] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [152.435893] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [152.436068] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [152.436233] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [152.436394] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [152.436556] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [152.436717] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [152.436930] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [152.437102] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [152.437265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [152.437426] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [152.437597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [152.437842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [152.438019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [152.438182] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [152.438727] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [152.438949] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [152.439134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [152.439338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.439498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [152.439659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [152.439886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [152.440084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [152.440247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [152.440414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [152.440574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [152.440804] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [152.441708] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [152.442272] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [152.442922] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [152.443149] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [152.443368] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [152.443584] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [152.443844] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [152.444097] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [152.444314] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [152.444530] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [152.444746] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [152.445003] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [152.446732] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [152.448157] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [152.448489] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [152.448689] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [152.453813] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [152.453992] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [152.454157] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [152.454319] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [152.454486] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [152.454650] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [152.454859] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [152.455092] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [152.455287] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [152.455448] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [152.455643] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [152.455938] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [152.456189] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [152.456335] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [152.456480] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [152.456624] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [152.456801] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [152.457091] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [152.457382] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [152.457553] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [152.457828] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [152.458084] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [152.458293] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [152.458457] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [152.671762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.682762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.693763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.704764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.715762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.726763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.737763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.748765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.759765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.770762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.781764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.792764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.803762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.814762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.825763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.836764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.847763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.858763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.869763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.880764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.891762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.902763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.913763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.924765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.935762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.946762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.957764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.968764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.979762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [152.990762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [153.001763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [153.012765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [153.012956] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [153.012976] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [153.013031] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [153.013242] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [153.013442] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [153.013605] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [153.014023] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [153.014223] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [153.014381] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [153.014644] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [153.014809] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [153.014991] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [153.015214] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [153.015376] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [153.015732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [153.015920] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [153.016129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [153.016289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [153.016448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [153.016607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [153.016777] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [153.016971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [153.017130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [153.017321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [153.017479] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [153.017638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [153.017843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [153.018049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [153.018222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [153.018375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [153.018533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [153.018687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [153.018887] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [153.019074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [153.019235] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [153.019399] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [153.019562] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [153.019726] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [153.019921] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [153.020123] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [153.020285] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [153.020439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [153.020592] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [153.020744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [153.020958] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [153.021148] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [153.021307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [153.021460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [153.021650] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [153.021861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [153.022054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [153.022210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [153.022363] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [153.022554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [153.022717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [153.022920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [153.023119] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [153.023279] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [153.023433] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [153.023585] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [153.023770] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [153.023953] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [153.024111] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [153.024282] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [153.025296] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [153.025468] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [153.025636] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [153.035869] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [153.036118] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [153.036271] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [153.036424] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [153.036575] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [153.036740] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [153.037266] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [153.037417] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [153.037561] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [153.037706] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [153.041327] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [153.042440] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [153.042976] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [153.043871] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [153.044384] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [153.044440] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [153.045913] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [153.061808] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [153.065045] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [153.065997] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [153.066791] [drm:drm_client_modeset_probe] <7> [153.066732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [153.067097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [153.067011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [153.067150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [153.067246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [153.067380] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [153.067478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [153.067666] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [153.067687] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [153.067709] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [153.067973] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [153.067998] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [153.068015] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [153.068045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [153.068279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [153.068304] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [153.068321] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [153.068330] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [153.068335] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [153.068339] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [153.068255] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [153.068440] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [153.068456] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [153.068467] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [153.068471] i915 device info: graphics version: 9 <7> [153.068473] i915 device info: media version: 9 <7> [153.068474] i915 device info: display version: 9 <7> [153.068476] i915 device info: graphics stepping: F0 <7> [153.068477] i915 device info: media stepping: F0 <7> [153.068479] i915 device info: display stepping: C0 <7> [153.068480] i915 device info: base die stepping: <7> [153.068481] i915 device info: gt: 2 <7> [153.068483] i915 device info: memory-regions: 0x21 <7> [153.068484] i915 device info: page-sizes: 0x11000 <7> [153.068486] i915 device info: platform: KABYLAKE <7> [153.068487] i915 device info: ppgtt-size: 48 <7> [153.068489] i915 device info: ppgtt-type: 2 <7> [153.068490] i915 device info: dma_mask_size: 39 <7> [153.068492] i915 device info: is_mobile: no <7> [153.068484] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7> [153.068493] i915 device info: is_lp: no <7> [153.068494] i915 device info: require_force_probe: no <7> [153.068496] i915 device info: is_dgfx: no <7> [153.068497] i915 device info: has_64bit_reloc: yes <7> [153.068498] i915 device info: has_64k_pages: no <7> [153.068499] i915 device info: gpu_reset_clobbers_display: no <7> [153.068502] i915 device info: has_reset_engine: yes <7> [153.068504] i915 device info: has_3d_pipeline: yes <7> [153.068505] i915 device info: has_4tile: no <7> [153.068506] i915 device info: has_flat_ccs: no <7> [153.068508] i915 device info: has_global_mocs: no <7> [153.068509] i915 device info: has_gmd_id: no <7> [153.068510] i915 device info: has_gt_uc: yes <7> [153.068512] i915 device info: has_heci_pxp: no <7> [153.068513] i915 device info: has_heci_gscfi: no <7> [153.068515] i915 device info: has_guc_deprivilege: no <7> [153.068516] i915 device info: has_l3_ccs_read: no <6> [153.068516] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [153.068518] i915 device info: has_l3_dpf: no <7> [153.068519] i915 device info: has_llc: yes <7> [153.068521] i915 device info: has_logical_ring_contexts: yes <7> [153.068522] i915 device info: has_logical_ring_elsq: no <7> [153.068523] i915 device info: has_media_ratio_mode: no <7> [153.068525] i915 device info: has_mslice_steering: no <7> [153.068526] i915 device info: has_oa_bpc_reporting: no <7> [153.068527] i915 device info: has_oa_slice_contrib_limits: no <7> [153.068529] i915 device info: has_oam: no <7> [153.068530] i915 device info: has_one_eu_per_fuse_bit: no <7> [153.068531] i915 device info: has_pxp: no <7> [153.068533] i915 device info: has_rc6: yes <7> [153.068534] i915 device info: has_rc6p: no <7> [153.068535] i915 device info: has_rps: yes <7> [153.068537] i915 device info: has_runtime_pm: yes <7> [153.068538] i915 device info: has_snoop: no <7> [153.068540] i915 device info: has_coherent_ggtt: yes <7> [153.068541] i915 device info: tuning_thread_rr_after_dep: no <7> [153.068542] i915 device info: unfenced_needs_alignment: no <7> [153.068544] i915 device info: hws_needs_physical: no <7> [153.068545] i915 device info: has_pooled_eu: no <7> [153.068546] i915 device info: cursor_needs_physical: no <7> [153.068548] i915 device info: has_cdclk_crawl: no <7> [153.068549] i915 device info: has_cdclk_squash: no <7> [153.068551] i915 device info: has_ddi: yes <7> [153.068552] i915 device info: has_dp_mst: yes <7> [153.068553] i915 device info: has_dsb: no <7> [153.068555] i915 device info: has_fpga_dbg: yes <7> [153.068556] i915 device info: has_gmch: no <7> [153.068557] i915 device info: has_hotplug: yes <7> [153.068559] i915 device info: has_hti: no <7> [153.068560] i915 device info: has_ipc: yes <7> [153.068561] i915 device info: has_overlay: no <7> [153.068563] i915 device info: has_psr: yes <7> [153.068564] i915 device info: has_psr_hw_tracking: yes <7> [153.068565] i915 device info: overlay_needs_physical: no <7> [153.068567] i915 device info: supports_tv: no <7> [153.068568] i915 device info: has_hdcp: yes <7> [153.068570] i915 device info: has_dmc: yes <7> [153.068571] i915 device info: has_dsc: no <7> [153.068572] i915 device info: rawclk rate: 24000 kHz <7> [153.068574] i915 device info: iommu: enabled <7> [153.068576] i915 device info: available engines: 40403 <7> [153.068577] i915 device info: slice total: 1, mask=0001 <7> [153.068579] i915 device info: subslice total: 3 <7> [153.068580] i915 device info: slice0: 3 subslices, mask=00000007 <7> [153.068582] i915 device info: slice1: 0 subslices, mask=00000000 <7> [153.068584] i915 device info: slice2: 0 subslices, mask=00000000 <7> [153.068585] i915 device info: EU total: 24 <7> [153.068587] i915 device info: EU per subslice: 8 <7> [153.068588] i915 device info: has slice power gating: no <7> [153.068590] i915 device info: has subslice power gating: no <7> [153.068591] i915 device info: has EU power gating: yes <6> [153.068593] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [153.068594] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [153.068596] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [153.070275] [drm:drm_client_modeset_probe] <7> [153.070543] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [153.070594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [153.070821] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [153.070844] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [153.070862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [153.071045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [153.071065] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [153.071082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [153.071274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [153.071292] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [153.071301] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [153.071305] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [153.071309] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [153.071392] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [153.071411] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [153.071441] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [153.071468] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [153.073733] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [153.221138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [153.221589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [153.221855] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [153.222106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [153.222811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [164.115885] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [164.123865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [164.148882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [164.158292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [164.158800] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [164.158863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [164.159301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [164.159144] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [164.159336] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [164.159667] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [164.162882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [164.167800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [164.373901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [164.381320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [164.381566] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [164.381594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [164.381860] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [164.381896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [164.382222] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [164.382202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [164.383075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [164.383430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [164.384106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [164.384802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [164.385281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [164.385636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [164.386014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [164.386366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [164.408727] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [164.446253] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [164.792359] [IGT] Reloading i915 as normal <7> [164.934678] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [164.934924] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [164.935095] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [164.935269] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [164.935558] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [164.935727] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [164.936441] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [164.936617] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [164.936812] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [164.936973] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [164.936978] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [164.937191] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [164.937206] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [164.937368] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [164.937665] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [164.937858] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [164.938010] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [164.938160] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [164.938308] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [164.943491] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [164.943663] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [164.943869] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [164.944073] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [164.944265] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [164.944418] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [164.944564] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [164.944709] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [164.944862] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [164.945007] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [164.945153] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [164.945299] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [164.945443] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [164.945587] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [164.946133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [164.946301] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [164.946471] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [164.946638] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [164.946839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [164.947026] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [164.947226] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [164.947390] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [164.947555] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [164.947770] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [164.947981] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [164.948155] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [164.948317] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [164.948479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [164.948640] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [164.948811] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [164.948975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [164.949141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [164.949302] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [164.949464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [164.949626] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [164.949792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [164.949987] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [164.950148] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [164.950309] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [164.950481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [164.950679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [164.950923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [164.951105] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [164.951655] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [164.951868] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [164.952043] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [164.952246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [164.952408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [164.952568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [164.952737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [164.952971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [164.953133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [164.953294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [164.953454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [164.953644] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [164.954669] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [164.954785] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [164.955274] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [164.955433] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [164.955588] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [164.955740] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [164.955948] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [164.956124] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [164.956275] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [164.956425] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [164.956575] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [164.956725] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [164.957837] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [164.959082] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [164.959332] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [164.959497] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [164.963833] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [164.963995] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [164.964160] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [164.964322] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [164.964491] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [164.964655] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [164.964848] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [164.965127] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [164.965290] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [164.965452] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [164.965615] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [164.965871] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [164.966112] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [164.966259] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [164.966403] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [164.966548] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [164.966692] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [164.966955] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [164.967267] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [164.967436] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [164.967659] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [164.967873] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [164.968142] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [164.968308] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [165.183764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.194764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.205765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.216766] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.227764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.238764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.249765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.260765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.271765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.282764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.293765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.304765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.315763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.326763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.337765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.348766] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.359764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.370764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.381765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.392765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.403763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.414765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.425763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.436763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.447765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.458763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.469763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.480765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.491763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.502763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.513772] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.524763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [165.524957] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [165.524977] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [165.525036] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [165.525251] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [165.525455] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [165.525622] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [165.526083] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [165.526245] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [165.526402] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [165.526667] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [165.526832] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [165.527015] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [165.527236] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [165.527399] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [165.527775] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [165.527992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [165.528167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [165.528328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [165.528488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [165.528648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [165.528817] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [165.529011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [165.529171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [165.529330] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [165.529489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [165.529684] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [165.529853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [165.530045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [165.530198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [165.530352] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [165.530511] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [165.530664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [165.530832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [165.531020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [165.531181] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [165.531347] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [165.531509] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [165.531672] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [165.531869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [165.532070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [165.532234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [165.532388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [165.532542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [165.532694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [165.532908] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [165.533093] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [165.533249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [165.533402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [165.533556] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [165.533720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [165.533920] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [165.534074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [165.534228] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [165.534420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [165.534583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [165.534744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [165.534952] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [165.535112] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [165.535267] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [165.535418] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [165.535595] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [165.535745] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [165.535947] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [165.536116] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [165.537265] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [165.537437] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [165.537602] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [165.547692] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [165.547983] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [165.548137] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [165.548286] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [165.548435] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [165.548601] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [165.549146] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [165.549326] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [165.549471] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [165.549615] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [165.552985] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [165.553691] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [165.554035] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [165.554590] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [165.554954] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [165.555002] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [165.556500] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [165.568613] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [165.570826] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [165.571434] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [165.572031] [drm:drm_client_modeset_probe] <7> [165.571996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [165.572287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [165.572218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [165.572326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [165.572452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [165.572629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [165.572921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [165.573169] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [165.573222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [165.573333] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [165.573336] i915 device info: graphics version: 9 <7> [165.573338] i915 device info: media version: 9 <7> [165.573339] i915 device info: display version: 9 <7> [165.573340] i915 device info: graphics stepping: F0 <7> [165.573342] i915 device info: media stepping: F0 <7> [165.573343] i915 device info: display stepping: C0 <7> [165.573344] i915 device info: base die stepping: <7> [165.573345] i915 device info: gt: 2 <7> [165.573347] i915 device info: memory-regions: 0x21 <7> [165.573348] i915 device info: page-sizes: 0x11000 <7> [165.573349] i915 device info: platform: KABYLAKE <7> [165.573350] i915 device info: ppgtt-size: 48 <7> [165.573352] i915 device info: ppgtt-type: 2 <7> [165.573353] i915 device info: dma_mask_size: 39 <7> [165.573354] i915 device info: is_mobile: no <7> [165.573355] i915 device info: is_lp: no <7> [165.573356] i915 device info: require_force_probe: no <7> [165.573357] i915 device info: is_dgfx: no <7> [165.573359] i915 device info: has_64bit_reloc: yes <7> [165.573360] i915 device info: has_64k_pages: no <7> [165.573361] i915 device info: gpu_reset_clobbers_display: no <7> [165.573362] i915 device info: has_reset_engine: yes <7> [165.573363] i915 device info: has_3d_pipeline: yes <7> [165.573365] i915 device info: has_4tile: no <7> [165.573366] i915 device info: has_flat_ccs: no <7> [165.573367] i915 device info: has_global_mocs: no <7> [165.573368] i915 device info: has_gmd_id: no <7> [165.573369] i915 device info: has_gt_uc: yes <7> [165.573370] i915 device info: has_heci_pxp: no <7> [165.573371] i915 device info: has_heci_gscfi: no <7> [165.573373] i915 device info: has_guc_deprivilege: no <7> [165.573374] i915 device info: has_l3_ccs_read: no <7> [165.573375] i915 device info: has_l3_dpf: no <7> [165.573376] i915 device info: has_llc: yes <7> [165.573377] i915 device info: has_logical_ring_contexts: yes <7> [165.573378] i915 device info: has_logical_ring_elsq: no <7> [165.573379] i915 device info: has_media_ratio_mode: no <7> [165.573381] i915 device info: has_mslice_steering: no <7> [165.573382] i915 device info: has_oa_bpc_reporting: no <7> [165.573383] i915 device info: has_oa_slice_contrib_limits: no <7> [165.573384] i915 device info: has_oam: no <7> [165.573385] i915 device info: has_one_eu_per_fuse_bit: no <7> [165.573396] i915 device info: has_pxp: no <7> [165.573397] i915 device info: has_rc6: yes <7> [165.573398] i915 device info: has_rc6p: no <7> [165.573400] i915 device info: has_rps: yes <7> [165.573401] i915 device info: has_runtime_pm: yes <7> [165.573403] i915 device info: has_snoop: no <7> [165.573404] i915 device info: has_coherent_ggtt: yes <7> [165.573405] i915 device info: tuning_thread_rr_after_dep: no <7> [165.573407] i915 device info: unfenced_needs_alignment: no <7> [165.573408] i915 device info: hws_needs_physical: no <7> [165.573409] i915 device info: has_pooled_eu: no <7> [165.573411] i915 device info: cursor_needs_physical: no <7> [165.573412] i915 device info: has_cdclk_crawl: no <7> [165.573413] i915 device info: has_cdclk_squash: no <7> [165.573415] i915 device info: has_ddi: yes <7> [165.573416] i915 device info: has_dp_mst: yes <7> [165.573418] i915 device info: has_dsb: no <7> [165.573419] i915 device info: has_fpga_dbg: yes <7> [165.573420] i915 device info: has_gmch: no <7> [165.573422] i915 device info: has_hotplug: yes <7> [165.573423] i915 device info: has_hti: no <7> [165.573424] i915 device info: has_ipc: yes <7> [165.573426] i915 device info: has_overlay: no <7> [165.573427] i915 device info: has_psr: yes <7> [165.573428] i915 device info: has_psr_hw_tracking: yes <7> [165.573430] i915 device info: overlay_needs_physical: no <7> [165.573431] i915 device info: supports_tv: no <7> [165.573433] i915 device info: has_hdcp: yes <7> [165.573434] i915 device info: has_dmc: yes <7> [165.573435] i915 device info: has_dsc: no <7> [165.573437] i915 device info: rawclk rate: 24000 kHz <7> [165.573438] i915 device info: iommu: enabled <7> [165.573440] i915 device info: available engines: 40403 <7> [165.573442] i915 device info: slice total: 1, mask=0001 <7> [165.573443] i915 device info: subslice total: 3 <7> [165.573445] i915 device info: slice0: 3 subslices, mask=00000007 <7> [165.573447] i915 device info: slice1: 0 subslices, mask=00000000 <7> [165.573448] i915 device info: slice2: 0 subslices, mask=00000000 <7> [165.573450] i915 device info: EU total: 24 <7> [165.573451] i915 device info: EU per subslice: 8 <7> [165.573452] i915 device info: has slice power gating: no <7> [165.573454] i915 device info: has subslice power gating: no <7> [165.573455] i915 device info: has EU power gating: yes <6> [165.573457] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [165.573459] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [165.573460] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [165.573404] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [165.573577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [165.574276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.575223] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [165.575494] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [165.575838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [165.575860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [165.576163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.576775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [165.577368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [165.577944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [165.579390] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [165.580509] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [165.581295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [165.581523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [165.581695] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [165.581880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [165.582511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.582684] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [165.582705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [165.582718] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [165.582730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [165.582964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.584955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.585166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [165.585911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.586413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.586418] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [165.586566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [165.616128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.616138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [165.616316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.616492] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [165.616512] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [165.616524] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [165.616535] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [165.616538] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [165.616540] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [165.616675] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [165.616692] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [165.616711] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [165.616730] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [165.617550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.617729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [165.618313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [165.618970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [165.619158] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [165.619322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [165.619965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.620309] [drm:drm_client_modeset_probe] <7> [165.620536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [165.620573] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [165.620820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.621476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.621667] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [165.621692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [165.621708] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [165.622425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.622981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [165.623530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [165.624111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [165.625365] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [165.625296] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [165.626481] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [165.627310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [165.627590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [165.627743] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [165.627911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [165.628536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.628688] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [165.628704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [165.628716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [165.628907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.630310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.630446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [165.631159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.631668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.631674] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [165.631843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [165.660888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.660893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [165.661025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.661175] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [165.661189] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [165.661196] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [165.661198] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [165.661201] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [165.661275] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [165.661287] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [165.661310] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [165.661328] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [165.661332] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [165.661412] [drm:drm_client_modeset_probe] <7> [165.661349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [165.661581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.662265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.662423] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [165.662438] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [165.662454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [165.662688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.663205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.663367] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [165.663381] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [165.663392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [165.663554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.664055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [165.664568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [165.665129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [165.666396] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [165.667356] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [165.668135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [165.668305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [165.668454] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [165.668600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [165.669212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.669374] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [165.669388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [165.669400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [165.669541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.670623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.670786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [165.671487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.672014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.672021] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [165.672153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [165.695068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.695073] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [165.695202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.695354] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [165.695367] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [165.695370] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [165.695373] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [165.695375] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [165.695404] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [165.695412] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [165.695427] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [165.695440] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [165.695506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [165.695522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [165.695678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.696285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [165.696811] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [165.697364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [165.698789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [165.699787] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [165.700444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [165.700709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [165.700882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [165.701049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [165.701644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.701822] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [165.701934] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [165.701952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [165.702098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.703451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.703582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [165.704274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.704771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.704775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [165.704959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [165.728431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.728435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [165.728565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.728714] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [165.731099] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [165.731113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [165.731253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.731726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.731883] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [165.732366] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [165.732379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [165.732515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.733018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [165.733510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [165.734092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [165.735234] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [165.736278] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [165.737039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [165.737214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [165.737359] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [165.737500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [165.738643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.738809] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [165.739218] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [165.739230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [165.739368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.740487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.740615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [165.741310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.741842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.741846] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [165.742002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [165.765533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.765538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [165.765665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.765823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [165.766197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [165.766210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [165.766345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.766827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.767035] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [165.767061] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [165.767072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [165.767208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.767682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [165.768238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [165.768768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [165.769790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [165.770786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [165.771555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [165.771722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [165.771893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [165.772096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [165.772690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.772882] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [165.772932] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [165.772961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [165.773112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.774267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.774418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [165.775214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [165.775701] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.775705] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [165.775841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [165.800467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [165.800471] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [165.800598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.800746] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [176.807555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [176.811764] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [176.852880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [176.858563] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [176.859246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [176.859579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [176.860351] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [176.860519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [176.861037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [176.861426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [176.861703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [176.862405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [176.863053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [176.863312] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [176.863564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [176.864323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [176.864609] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [176.865648] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [176.865666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [176.868131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [176.892615] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [176.897796] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [176.897985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [176.898538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [176.899113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [176.899681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [176.901465] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [176.902499] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [176.903130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [176.903396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [176.903546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [176.903695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [176.904326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [176.904493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [176.904512] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [176.904663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [176.906063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [176.906201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [176.907086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [176.907553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [176.907558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [176.907682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [176.931291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [176.931295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [176.931423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [176.931571] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [176.931613] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [176.934438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [176.958791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [176.964166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [176.964381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [176.964544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [176.965026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [176.965595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [176.965752] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [176.965921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [176.966552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [176.966721] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [176.968271] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [176.968297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [176.970806] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [176.995257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [177.000175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [177.000371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [177.000930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [177.001141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [177.001164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [177.001342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [177.001885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [177.002380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [177.002976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [177.004310] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [177.005175] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [177.005967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [177.006144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [177.006302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [177.006458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [177.007091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [177.007267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [177.007290] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [177.010954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [177.035388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [177.040193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [177.040413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [177.040595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [177.041110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [177.041686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [177.041884] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [177.042093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [177.042729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [177.042942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [177.043498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [177.047119] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [177.071579] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [177.076183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [177.076373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [177.077563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [177.077722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [177.078479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [177.079002] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [177.079010] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [177.079195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [177.102717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [177.102724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [177.102921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [177.103142] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [177.103173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [177.103363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [177.103916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [177.104131] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [177.104163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [177.104324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [177.104852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [177.105357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [177.105929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [177.107245] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [177.108053] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [177.108802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [177.109001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [177.109190] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [177.109345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [177.109967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [177.110139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [177.110155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [177.110303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [177.111434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [177.111575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [177.112252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [177.112792] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [177.112798] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [177.112942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [177.137574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [177.137578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [177.137703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [177.137933] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [177.137953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [177.140341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [177.341880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [177.350009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [177.350717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [177.351091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [177.351854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [177.352275] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [177.352316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [177.352373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [177.352806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [177.353541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [177.354538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [177.355114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [177.355485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [177.355894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [177.356261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [177.357604] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [177.358340] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [177.358895] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [177.358926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [177.359475] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [177.359706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [177.360246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [177.360509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [177.360518] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [177.360747] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [177.364954] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [177.364960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [177.365100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [177.396996] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [177.444377] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [177.819425] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [177.819656] [IGT] i915_pm_rpm: exiting, ret=0

<6> [140.075599] [IGT] i915_pm_rpm: executing

<7> [140.082550] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [140.083207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [140.083225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [140.083515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [140.083713] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [140.083873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [140.084475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.084771] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [140.084848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [140.084860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [140.085048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.085549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [140.086072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [140.086621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [140.088117] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [140.089048] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [140.089789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [140.090056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [140.090202] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [140.090344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [140.091497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.091650] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [140.091713] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [140.091725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [140.091878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.093215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [140.093351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [140.094527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [140.095097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [140.095103] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.095236] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [140.120428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [140.120433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [140.120558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.120703] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [140.124211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [140.124227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [140.124370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.124887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.125076] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [140.125481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [140.125493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [140.125633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.126127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [140.126650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [140.127206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [140.128317] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [140.129413] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [140.130184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [140.130359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [140.130504] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [140.130646] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [140.131262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.131418] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [140.131885] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [140.131898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [140.132033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.133618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [140.133762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [140.134462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [140.135502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [140.135506] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.135631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [140.161920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [140.161924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [140.162049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.162193] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [140.162487] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [140.162499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [140.162650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.163146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.163329] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [140.163354] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [140.163380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [140.163527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.164019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [140.164522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [140.165107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [140.166221] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [140.167280] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [140.168040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [140.168204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [140.168352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [140.168499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [140.169124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.169281] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [140.169307] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [140.169318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [140.169481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.170665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [140.171196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [140.172420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [140.172991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [140.172997] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.173129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [140.198269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [140.198273] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [140.198400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.198544] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [151.243610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [151.251859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [151.276858] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [151.286235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [151.287125] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [151.287614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.288892] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [151.289023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.289726] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [151.290486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.291050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [151.291988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [151.292716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [151.293100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [151.293456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [151.294291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.294681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [151.295467] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [151.297765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [151.322257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [151.327763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [151.327963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.328130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [151.328600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [151.329182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [151.329391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [151.329600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [151.330285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.330486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [151.330870] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [151.330895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [151.334082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [151.357527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [151.362705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [151.362936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.363533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [151.364205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [151.364797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [151.366778] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [151.367461] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [151.367993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [151.368409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [151.368640] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [151.368890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [151.369582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.369871] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [151.369898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [151.370111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.371671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [151.371858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [151.372567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [151.373091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [151.373099] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [151.373243] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [151.397352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [151.397357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [151.397481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.397631] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [151.397672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [151.400479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [151.424913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [151.429776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [151.429979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.430141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [151.430610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [151.431192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [151.431411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [151.431592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [151.432252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.432491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [151.433128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [151.435766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [151.460191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [151.465019] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [151.465215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.465769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.465985] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [151.466008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [151.466182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.466703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [151.467215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [151.467809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [151.469137] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [151.469975] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [151.470774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [151.470957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [151.471116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [151.471270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [151.471902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.472077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [151.472093] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [151.472237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.473289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [151.473426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [151.474133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [151.474647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [151.474653] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [151.474792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [151.499920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [151.499925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [151.500056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.500207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [151.500226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [151.500361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.500902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.501073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [151.501087] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [151.501221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.501699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [151.502232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [151.502834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [151.503950] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [151.504792] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [151.505554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [151.505722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [151.505899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [151.506050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [151.506656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.506864] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [151.506881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [151.507014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.508126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [151.508613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [151.509802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [151.510332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [151.510336] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [151.510464] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [151.535054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [151.535059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [151.535196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.535344] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [151.535359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [151.541178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [151.635810] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [151.749819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [151.756358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [151.757003] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [151.757303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.758274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [151.758904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [151.759515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [151.759924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [151.760204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [151.760517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [151.760799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [151.761112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [151.761496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [151.762859] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [151.763608] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [151.764159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [151.764250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [151.764864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [151.765091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [151.765590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [151.765901] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [151.765909] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [151.766131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [151.770821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [151.770827] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [151.770967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [151.793717] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [151.841253] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [152.235371] [IGT] Reloading i915 w/o display

<7> [152.422277] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [152.422515] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [152.422696] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [152.422997] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [152.423269] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [152.423480] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [152.424295] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [152.424447] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [152.424592] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [152.424735] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [152.424739] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [152.425140] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [152.425155] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [152.425319] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [152.425619] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [152.425863] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [152.426016] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [152.426166] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [152.426315] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [152.430487] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [152.430658] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [152.430875] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [152.431078] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [152.431248] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [152.431409] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [152.431548] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [152.431686] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [152.431872] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [152.432020] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [152.432158] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [152.432296] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [152.432432] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [152.432568] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [152.433115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [152.433308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [152.433492] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [152.433671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [152.433903] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [152.434075] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [152.434279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [152.434443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [152.434608] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [152.434821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [152.435029] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [152.435195] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [152.435359] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [152.435520] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [152.435682] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [152.435893] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [152.436068] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [152.436233] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [152.436394] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [152.436556] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [152.436717] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [152.436930] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [152.437102] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [152.437265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [152.437426] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [152.437597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [152.437842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [152.438019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [152.438182] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [152.438727] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [152.438949] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [152.439134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [152.439338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.439498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [152.439659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [152.439886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [152.440084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [152.440247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [152.440414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [152.440574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [152.440804] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [152.441708] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [152.442272] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [152.442922] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [152.443149] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [152.443368] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [152.443584] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [152.443844] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [152.444097] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [152.444314] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [152.444530] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [152.444746] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [152.445003] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [152.446732] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [152.448157] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [152.448489] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [152.448689] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [152.453813] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [152.453992] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [152.454157] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [152.454319] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [152.454486] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [152.454650] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [152.454859] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [152.455092] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [152.455287] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [152.455448] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [152.455643] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [152.455938] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [152.456189] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [152.456335] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [152.456480] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [152.456624] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [152.456801] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [152.457091] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [152.457382] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [152.457553] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [152.457828] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [152.458084] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [152.458293] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [152.458457] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [152.671762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.682762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.693763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.704764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.715762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.726763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.737763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.748765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.759765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.770762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.781764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.792764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.803762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.814762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.825763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.836764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.847763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.858763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.869763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.880764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.891762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.902763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.913763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.924765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.935762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.946762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.957764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.968764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.979762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [152.990762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [153.001763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [153.012765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [153.012956] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [153.012976] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [153.013031] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [153.013242] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [153.013442] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [153.013605] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [153.014023] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [153.014223] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [153.014381] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [153.014644] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [153.014809] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [153.014991] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [153.015214] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [153.015376] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [153.015732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [153.015920] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [153.016129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [153.016289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [153.016448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [153.016607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [153.016777] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [153.016971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [153.017130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [153.017321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [153.017479] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [153.017638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [153.017843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [153.018049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [153.018222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [153.018375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [153.018533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [153.018687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [153.018887] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [153.019074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [153.019235] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [153.019399] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [153.019562] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [153.019726] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [153.019921] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [153.020123] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [153.020285] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [153.020439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [153.020592] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [153.020744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [153.020958] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [153.021148] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [153.021307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [153.021460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [153.021650] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [153.021861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [153.022054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [153.022210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [153.022363] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [153.022554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [153.022717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [153.022920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [153.023119] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [153.023279] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [153.023433] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [153.023585] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [153.023770] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [153.023953] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [153.024111] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [153.024282] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [153.025296] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [153.025468] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [153.025636] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [153.035869] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [153.036118] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [153.036271] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [153.036424] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [153.036575] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [153.036740] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [153.037266] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [153.037417] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [153.037561] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [153.037706] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [153.041327] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [153.042440] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [153.042976] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [153.043871] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [153.044384] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [153.044440] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [153.045913] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [153.061808] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [153.065045] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [153.065997] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [153.066791] [drm:drm_client_modeset_probe]

<7> [153.066732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [153.067097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [153.067011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [153.067150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [153.067246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [153.067380] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [153.067478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [153.067666] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [153.067687] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [153.067709] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [153.067973] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [153.067998] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [153.068015] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [153.068045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [153.068279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [153.068304] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [153.068321] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [153.068330] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [153.068335] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [153.068339] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [153.068255] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [153.068440] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [153.068456] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [153.068467] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [153.068471] i915 device info: graphics version: 9

<7> [153.068473] i915 device info: media version: 9

<7> [153.068474] i915 device info: display version: 9

<7> [153.068476] i915 device info: graphics stepping: F0

<7> [153.068477] i915 device info: media stepping: F0

<7> [153.068479] i915 device info: display stepping: C0

<7> [153.068480] i915 device info: base die stepping: **

<7> [153.068481] i915 device info: gt: 2

<7> [153.068483] i915 device info: memory-regions: 0x21

<7> [153.068484] i915 device info: page-sizes: 0x11000

<7> [153.068486] i915 device info: platform: KABYLAKE

<7> [153.068487] i915 device info: ppgtt-size: 48

<7> [153.068489] i915 device info: ppgtt-type: 2

<7> [153.068490] i915 device info: dma_mask_size: 39

<7> [153.068492] i915 device info: is_mobile: no

<7> [153.068484] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<7> [153.068493] i915 device info: is_lp: no

<7> [153.068494] i915 device info: require_force_probe: no

<7> [153.068496] i915 device info: is_dgfx: no

<7> [153.068497] i915 device info: has_64bit_reloc: yes

<7> [153.068498] i915 device info: has_64k_pages: no

<7> [153.068499] i915 device info: gpu_reset_clobbers_display: no

<7> [153.068502] i915 device info: has_reset_engine: yes

<7> [153.068504] i915 device info: has_3d_pipeline: yes

<7> [153.068505] i915 device info: has_4tile: no

<7> [153.068506] i915 device info: has_flat_ccs: no

<7> [153.068508] i915 device info: has_global_mocs: no

<7> [153.068509] i915 device info: has_gmd_id: no

<7> [153.068510] i915 device info: has_gt_uc: yes

<7> [153.068512] i915 device info: has_heci_pxp: no

<7> [153.068513] i915 device info: has_heci_gscfi: no

<7> [153.068515] i915 device info: has_guc_deprivilege: no

<7> [153.068516] i915 device info: has_l3_ccs_read: no

<6> [153.068516] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [153.068518] i915 device info: has_l3_dpf: no

<7> [153.068519] i915 device info: has_llc: yes

<7> [153.068521] i915 device info: has_logical_ring_contexts: yes

<7> [153.068522] i915 device info: has_logical_ring_elsq: no

<7> [153.068523] i915 device info: has_media_ratio_mode: no

<7> [153.068525] i915 device info: has_mslice_steering: no

<7> [153.068526] i915 device info: has_oa_bpc_reporting: no

<7> [153.068527] i915 device info: has_oa_slice_contrib_limits: no

<7> [153.068529] i915 device info: has_oam: no

<7> [153.068530] i915 device info: has_one_eu_per_fuse_bit: no

<7> [153.068531] i915 device info: has_pxp: no

<7> [153.068533] i915 device info: has_rc6: yes

<7> [153.068534] i915 device info: has_rc6p: no

<7> [153.068535] i915 device info: has_rps: yes

<7> [153.068537] i915 device info: has_runtime_pm: yes

<7> [153.068538] i915 device info: has_snoop: no

<7> [153.068540] i915 device info: has_coherent_ggtt: yes

<7> [153.068541] i915 device info: tuning_thread_rr_after_dep: no

<7> [153.068542] i915 device info: unfenced_needs_alignment: no

<7> [153.068544] i915 device info: hws_needs_physical: no

<7> [153.068545] i915 device info: has_pooled_eu: no

<7> [153.068546] i915 device info: cursor_needs_physical: no

<7> [153.068548] i915 device info: has_cdclk_crawl: no

<7> [153.068549] i915 device info: has_cdclk_squash: no

<7> [153.068551] i915 device info: has_ddi: yes

<7> [153.068552] i915 device info: has_dp_mst: yes

<7> [153.068553] i915 device info: has_dsb: no

<7> [153.068555] i915 device info: has_fpga_dbg: yes

<7> [153.068556] i915 device info: has_gmch: no

<7> [153.068557] i915 device info: has_hotplug: yes

<7> [153.068559] i915 device info: has_hti: no

<7> [153.068560] i915 device info: has_ipc: yes

<7> [153.068561] i915 device info: has_overlay: no

<7> [153.068563] i915 device info: has_psr: yes

<7> [153.068564] i915 device info: has_psr_hw_tracking: yes

<7> [153.068565] i915 device info: overlay_needs_physical: no

<7> [153.068567] i915 device info: supports_tv: no

<7> [153.068568] i915 device info: has_hdcp: yes

<7> [153.068570] i915 device info: has_dmc: yes

<7> [153.068571] i915 device info: has_dsc: no

<7> [153.068572] i915 device info: rawclk rate: 24000 kHz

<7> [153.068574] i915 device info: iommu: enabled

<7> [153.068576] i915 device info: available engines: 40403

<7> [153.068577] i915 device info: slice total: 1, mask=0001

<7> [153.068579] i915 device info: subslice total: 3

<7> [153.068580] i915 device info: slice0: 3 subslices, mask=00000007

<7> [153.068582] i915 device info: slice1: 0 subslices, mask=00000000

<7> [153.068584] i915 device info: slice2: 0 subslices, mask=00000000

<7> [153.068585] i915 device info: EU total: 24

<7> [153.068587] i915 device info: EU per subslice: 8

<7> [153.068588] i915 device info: has slice power gating: no

<7> [153.068590] i915 device info: has subslice power gating: no

<7> [153.068591] i915 device info: has EU power gating: yes

<6> [153.068593] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [153.068594] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [153.068596] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [153.070275] [drm:drm_client_modeset_probe]

<7> [153.070543] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [153.070594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [153.070821] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [153.070844] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [153.070862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [153.071045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [153.071065] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [153.071082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [153.071274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [153.071292] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [153.071301] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [153.071305] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [153.071309] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [153.071392] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [153.071411] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [153.071441] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [153.071468] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [153.073733] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [153.221138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [153.221589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [153.221855] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [153.222106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [153.222811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [164.115885] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [164.123865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [164.148882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [164.158292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [164.158800] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [164.158863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [164.159301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [164.159144] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [164.159336] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [164.159667] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [164.162882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [164.167800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [164.373901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [164.381320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [164.381566] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [164.381594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [164.381860] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [164.381896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [164.382222] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [164.382202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [164.383075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [164.383430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [164.384106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [164.384802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [164.385281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [164.385636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [164.386014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [164.386366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [164.408727] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [164.446253] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [164.792359] [IGT] Reloading i915 as normal

<7> [164.934678] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [164.934924] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [164.935095] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [164.935269] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [164.935558] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [164.935727] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [164.936441] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [164.936617] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [164.936812] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [164.936973] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [164.936978] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [164.937191] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [164.937206] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [164.937368] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [164.937665] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [164.937858] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [164.938010] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [164.938160] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [164.938308] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [164.943491] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [164.943663] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [164.943869] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [164.944073] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [164.944265] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [164.944418] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [164.944564] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [164.944709] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [164.944862] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [164.945007] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [164.945153] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [164.945299] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [164.945443] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [164.945587] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [164.946133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [164.946301] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [164.946471] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [164.946638] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [164.946839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [164.947026] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [164.947226] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [164.947390] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [164.947555] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [164.947770] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [164.947981] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [164.948155] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [164.948317] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [164.948479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [164.948640] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [164.948811] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [164.948975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [164.949141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [164.949302] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [164.949464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [164.949626] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [164.949792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [164.949987] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [164.950148] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [164.950309] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [164.950481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [164.950679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [164.950923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [164.951105] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [164.951655] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [164.951868] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [164.952043] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [164.952246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [164.952408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [164.952568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [164.952737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [164.952971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [164.953133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [164.953294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [164.953454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [164.953644] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [164.954669] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [164.954785] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [164.955274] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [164.955433] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [164.955588] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [164.955740] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [164.955948] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [164.956124] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [164.956275] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [164.956425] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [164.956575] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [164.956725] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [164.957837] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [164.959082] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [164.959332] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [164.959497] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [164.963833] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [164.963995] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [164.964160] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [164.964322] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [164.964491] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [164.964655] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [164.964848] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [164.965127] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [164.965290] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [164.965452] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [164.965615] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [164.965871] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [164.966112] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [164.966259] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [164.966403] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [164.966548] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [164.966692] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [164.966955] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [164.967267] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [164.967436] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [164.967659] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [164.967873] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [164.968142] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [164.968308] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [165.183764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.194764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.205765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.216766] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.227764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.238764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.249765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.260765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.271765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.282764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.293765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.304765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.315763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.326763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.337765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.348766] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.359764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.370764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.381765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.392765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.403763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.414765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.425763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.436763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.447765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.458763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.469763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.480765] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.491763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.502763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.513772] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.524763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [165.524957] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [165.524977] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [165.525036] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [165.525251] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [165.525455] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [165.525622] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [165.526083] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [165.526245] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [165.526402] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [165.526667] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [165.526832] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [165.527015] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [165.527236] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [165.527399] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [165.527775] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [165.527992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [165.528167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [165.528328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [165.528488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [165.528648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [165.528817] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [165.529011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [165.529171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [165.529330] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [165.529489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [165.529684] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [165.529853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [165.530045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [165.530198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [165.530352] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [165.530511] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [165.530664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [165.530832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [165.531020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [165.531181] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [165.531347] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [165.531509] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [165.531672] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [165.531869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [165.532070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [165.532234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [165.532388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [165.532542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [165.532694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [165.532908] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [165.533093] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [165.533249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [165.533402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [165.533556] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [165.533720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [165.533920] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [165.534074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [165.534228] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [165.534420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [165.534583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [165.534744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [165.534952] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [165.535112] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [165.535267] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [165.535418] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [165.535595] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [165.535745] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [165.535947] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [165.536116] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [165.537265] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [165.537437] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [165.537602] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [165.547692] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [165.547983] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [165.548137] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [165.548286] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [165.548435] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [165.548601] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [165.549146] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [165.549326] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [165.549471] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [165.549615] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [165.552985] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [165.553691] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [165.554035] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [165.554590] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [165.554954] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [165.555002] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [165.556500] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [165.568613] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [165.570826] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [165.571434] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [165.572031] [drm:drm_client_modeset_probe]

<7> [165.571996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [165.572287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [165.572218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [165.572326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [165.572452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [165.572629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [165.572921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [165.573169] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [165.573222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [165.573333] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [165.573336] i915 device info: graphics version: 9

<7> [165.573338] i915 device info: media version: 9

<7> [165.573339] i915 device info: display version: 9

<7> [165.573340] i915 device info: graphics stepping: F0

<7> [165.573342] i915 device info: media stepping: F0

<7> [165.573343] i915 device info: display stepping: C0

<7> [165.573344] i915 device info: base die stepping: **

<7> [165.573345] i915 device info: gt: 2

<7> [165.573347] i915 device info: memory-regions: 0x21

<7> [165.573348] i915 device info: page-sizes: 0x11000

<7> [165.573349] i915 device info: platform: KABYLAKE

<7> [165.573350] i915 device info: ppgtt-size: 48

<7> [165.573352] i915 device info: ppgtt-type: 2

<7> [165.573353] i915 device info: dma_mask_size: 39

<7> [165.573354] i915 device info: is_mobile: no

<7> [165.573355] i915 device info: is_lp: no

<7> [165.573356] i915 device info: require_force_probe: no

<7> [165.573357] i915 device info: is_dgfx: no

<7> [165.573359] i915 device info: has_64bit_reloc: yes

<7> [165.573360] i915 device info: has_64k_pages: no

<7> [165.573361] i915 device info: gpu_reset_clobbers_display: no

<7> [165.573362] i915 device info: has_reset_engine: yes

<7> [165.573363] i915 device info: has_3d_pipeline: yes

<7> [165.573365] i915 device info: has_4tile: no

<7> [165.573366] i915 device info: has_flat_ccs: no

<7> [165.573367] i915 device info: has_global_mocs: no

<7> [165.573368] i915 device info: has_gmd_id: no

<7> [165.573369] i915 device info: has_gt_uc: yes

<7> [165.573370] i915 device info: has_heci_pxp: no

<7> [165.573371] i915 device info: has_heci_gscfi: no

<7> [165.573373] i915 device info: has_guc_deprivilege: no

<7> [165.573374] i915 device info: has_l3_ccs_read: no

<7> [165.573375] i915 device info: has_l3_dpf: no

<7> [165.573376] i915 device info: has_llc: yes

<7> [165.573377] i915 device info: has_logical_ring_contexts: yes

<7> [165.573378] i915 device info: has_logical_ring_elsq: no

<7> [165.573379] i915 device info: has_media_ratio_mode: no

<7> [165.573381] i915 device info: has_mslice_steering: no

<7> [165.573382] i915 device info: has_oa_bpc_reporting: no

<7> [165.573383] i915 device info: has_oa_slice_contrib_limits: no

<7> [165.573384] i915 device info: has_oam: no

<7> [165.573385] i915 device info: has_one_eu_per_fuse_bit: no

<7> [165.573396] i915 device info: has_pxp: no

<7> [165.573397] i915 device info: has_rc6: yes

<7> [165.573398] i915 device info: has_rc6p: no

<7> [165.573400] i915 device info: has_rps: yes

<7> [165.573401] i915 device info: has_runtime_pm: yes

<7> [165.573403] i915 device info: has_snoop: no

<7> [165.573404] i915 device info: has_coherent_ggtt: yes

<7> [165.573405] i915 device info: tuning_thread_rr_after_dep: no

<7> [165.573407] i915 device info: unfenced_needs_alignment: no

<7> [165.573408] i915 device info: hws_needs_physical: no

<7> [165.573409] i915 device info: has_pooled_eu: no

<7> [165.573411] i915 device info: cursor_needs_physical: no

<7> [165.573412] i915 device info: has_cdclk_crawl: no

<7> [165.573413] i915 device info: has_cdclk_squash: no

<7> [165.573415] i915 device info: has_ddi: yes

<7> [165.573416] i915 device info: has_dp_mst: yes

<7> [165.573418] i915 device info: has_dsb: no

<7> [165.573419] i915 device info: has_fpga_dbg: yes

<7> [165.573420] i915 device info: has_gmch: no

<7> [165.573422] i915 device info: has_hotplug: yes

<7> [165.573423] i915 device info: has_hti: no

<7> [165.573424] i915 device info: has_ipc: yes

<7> [165.573426] i915 device info: has_overlay: no

<7> [165.573427] i915 device info: has_psr: yes

<7> [165.573428] i915 device info: has_psr_hw_tracking: yes

<7> [165.573430] i915 device info: overlay_needs_physical: no

<7> [165.573431] i915 device info: supports_tv: no

<7> [165.573433] i915 device info: has_hdcp: yes

<7> [165.573434] i915 device info: has_dmc: yes

<7> [165.573435] i915 device info: has_dsc: no

<7> [165.573437] i915 device info: rawclk rate: 24000 kHz

<7> [165.573438] i915 device info: iommu: enabled

<7> [165.573440] i915 device info: available engines: 40403

<7> [165.573442] i915 device info: slice total: 1, mask=0001

<7> [165.573443] i915 device info: subslice total: 3

<7> [165.573445] i915 device info: slice0: 3 subslices, mask=00000007

<7> [165.573447] i915 device info: slice1: 0 subslices, mask=00000000

<7> [165.573448] i915 device info: slice2: 0 subslices, mask=00000000

<7> [165.573450] i915 device info: EU total: 24

<7> [165.573451] i915 device info: EU per subslice: 8

<7> [165.573452] i915 device info: has slice power gating: no

<7> [165.573454] i915 device info: has subslice power gating: no

<7> [165.573455] i915 device info: has EU power gating: yes

<6> [165.573457] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [165.573459] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [165.573460] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [165.573404] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [165.573577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [165.574276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.575223] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [165.575494] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [165.575838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [165.575860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [165.576163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.576775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [165.577368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [165.577944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [165.579390] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [165.580509] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [165.581295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [165.581523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [165.581695] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [165.581880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [165.582511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.582684] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [165.582705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [165.582718] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [165.582730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [165.582964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.584955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.585166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [165.585911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.586413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.586418] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [165.586566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [165.616128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.616138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [165.616316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.616492] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [165.616512] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [165.616524] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [165.616535] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [165.616538] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [165.616540] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [165.616675] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [165.616692] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [165.616711] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [165.616730] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [165.617550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.617729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [165.618313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [165.618970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [165.619158] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [165.619322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [165.619965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.620309] [drm:drm_client_modeset_probe]

<7> [165.620536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [165.620573] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [165.620820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.621476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.621667] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [165.621692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [165.621708] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [165.622425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.622981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [165.623530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [165.624111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [165.625365] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [165.625296] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [165.626481] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [165.627310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [165.627590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [165.627743] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [165.627911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [165.628536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.628688] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [165.628704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [165.628716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [165.628907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.630310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.630446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [165.631159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.631668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.631674] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [165.631843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [165.660888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.660893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [165.661025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.661175] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [165.661189] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [165.661196] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [165.661198] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [165.661201] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [165.661275] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [165.661287] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [165.661310] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [165.661328] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [165.661332] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [165.661412] [drm:drm_client_modeset_probe]

<7> [165.661349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [165.661581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.662265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.662423] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [165.662438] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [165.662454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [165.662688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.663205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.663367] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [165.663381] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [165.663392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [165.663554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.664055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [165.664568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [165.665129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [165.666396] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [165.667356] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [165.668135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [165.668305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [165.668454] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [165.668600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [165.669212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.669374] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [165.669388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [165.669400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [165.669541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.670623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.670786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [165.671487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.672014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.672021] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [165.672153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [165.695068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.695073] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [165.695202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.695354] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [165.695367] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [165.695370] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [165.695373] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [165.695375] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [165.695404] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [165.695412] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [165.695427] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [165.695440] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [165.695506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [165.695522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [165.695678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.696285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [165.696811] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [165.697364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [165.698789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [165.699787] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [165.700444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [165.700709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [165.700882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [165.701049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [165.701644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.701822] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [165.701934] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [165.701952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [165.702098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.703451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.703582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [165.704274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.704771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.704775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [165.704959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [165.728431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.728435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [165.728565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.728714] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [165.731099] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [165.731113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [165.731253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.731726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.731883] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [165.732366] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [165.732379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [165.732515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.733018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [165.733510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [165.734092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [165.735234] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [165.736278] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [165.737039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [165.737214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [165.737359] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [165.737500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [165.738643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.738809] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [165.739218] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [165.739230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [165.739368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.740487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.740615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [165.741310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.741842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.741846] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [165.742002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [165.765533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.765538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [165.765665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.765823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [165.766197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [165.766210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [165.766345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.766827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.767035] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [165.767061] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [165.767072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [165.767208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.767682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [165.768238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [165.768768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [165.769790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [165.770786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [165.771555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [165.771722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [165.771893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [165.772096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [165.772690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.772882] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [165.772932] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [165.772961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [165.773112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.774267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.774418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [165.775214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [165.775701] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.775705] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [165.775841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [165.800467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [165.800471] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [165.800598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.800746] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [176.807555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [176.811764] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [176.852880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [176.858563] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [176.859246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [176.859579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [176.860351] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [176.860519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [176.861037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [176.861426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [176.861703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [176.862405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [176.863053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [176.863312] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [176.863564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [176.864323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [176.864609] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [176.865648] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [176.865666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [176.868131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [176.892615] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [176.897796] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [176.897985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [176.898538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [176.899113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [176.899681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [176.901465] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [176.902499] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [176.903130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [176.903396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [176.903546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [176.903695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [176.904326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [176.904493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [176.904512] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [176.904663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [176.906063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [176.906201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [176.907086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [176.907553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [176.907558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [176.907682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [176.931291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [176.931295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [176.931423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [176.931571] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [176.931613] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [176.934438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [176.958791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [176.964166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [176.964381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [176.964544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [176.965026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [176.965595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [176.965752] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [176.965921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [176.966552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [176.966721] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [176.968271] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [176.968297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [176.970806] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [176.995257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [177.000175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [177.000371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [177.000930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [177.001141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [177.001164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [177.001342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [177.001885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [177.002380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [177.002976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [177.004310] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [177.005175] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [177.005967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [177.006144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [177.006302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [177.006458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [177.007091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [177.007267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [177.007290] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [177.010954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [177.035388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [177.040193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [177.040413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [177.040595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [177.041110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [177.041686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [177.041884] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [177.042093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [177.042729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [177.042942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [177.043498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [177.047119] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [177.071579] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [177.076183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [177.076373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [177.077563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [177.077722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [177.078479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [177.079002] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [177.079010] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [177.079195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [177.102717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [177.102724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [177.102921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [177.103142] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [177.103173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [177.103363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [177.103916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [177.104131] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [177.104163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [177.104324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [177.104852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [177.105357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [177.105929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [177.107245] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [177.108053] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [177.108802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [177.109001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [177.109190] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [177.109345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [177.109967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [177.110139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [177.110155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [177.110303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [177.111434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [177.111575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [177.112252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [177.112792] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [177.112798] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [177.112942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [177.137574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [177.137578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [177.137703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [177.137933] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [177.137953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [177.140341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [177.341880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [177.350009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [177.350717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [177.351091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [177.351854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [177.352275] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [177.352316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [177.352373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [177.352806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [177.353541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [177.354538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [177.355114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [177.355485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [177.355894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [177.356261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [177.357604] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [177.358340] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [177.358895] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [177.358926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [177.359475] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [177.359706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [177.360246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [177.360509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [177.360518] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [177.360747] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [177.364954] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [177.364960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [177.365100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [177.396996] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [177.444377] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [177.819425] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [177.819656] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload