Results for igt@i915_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-gb7d168f61 (x86_64) (Linux: 6.4.0-rc7-linus-v6.4-rc7-g45a3e24f65e9+ x86_64)
Out 
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 0
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_atomic_commit_tail+0xa2d/0xd10 [i915]
   intel_atomic_commit+0x380/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1ec/0x740
Wakeref count: 0
Subtest basic-rte: SUCCESS (11.949s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 0
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x79/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_atomic_commit_tail+0xa2d/0xd10 [i915]
   intel_atomic_commit+0x380/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1ec/0x740
Wakeref count: 0
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (11.949s)
Dmesg
<6> [92.769469] Console: switching to colour dummy device 80x25
<6> [92.769520] [IGT] i915_pm_rpm: executing
<6> [92.778436] [IGT] i915_pm_rpm: starting subtest basic-rte
<7> [92.778489] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [92.778940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [92.778958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.779100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.779577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.779727] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [92.779840] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [92.779852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.779987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.780465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.781005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.781541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.782699] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.783973] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.784733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.784971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.785169] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.785389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.786029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.786193] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [92.786258] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [92.786270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.786403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.788089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.788216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.788968] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.789488] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.789493] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.789663] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.814304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.814308] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.814434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.814579] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [92.818228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [92.818243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.818383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.818910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.819094] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [92.819619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [92.819633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.819800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.820288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.820878] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.821392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.822657] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.823768] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.824548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.824715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.824996] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.825152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.825801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.825999] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [92.826510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [92.826524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.826659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.827852] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.827978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.828681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.829162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.829168] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.829340] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.855573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.855578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.855704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.855904] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [92.856349] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [92.856363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [92.856523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.857055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.857245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [92.857270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [92.857281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [92.857418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.857943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [92.858410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [92.859008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [92.860113] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [92.861199] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [92.861943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [92.862115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [92.862262] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [92.862403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [92.863067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.863259] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [92.863285] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [92.863296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [92.863452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [92.864509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.864651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [92.865388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [92.865926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.865930] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [92.866099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [92.892898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [92.892903] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [92.893032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [92.893180] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [103.934628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [103.940853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [103.965917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [103.974093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [103.974837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [103.975185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [103.975925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [103.976316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [103.976355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [103.976709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [103.977454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [103.978136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [103.978877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [103.979499] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [103.980323] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [103.981414] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [103.982149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [103.982317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [103.982467] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [103.982614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [103.983242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [103.983411] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [103.983427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [103.983564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [103.984291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [103.984418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [103.985147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [103.985613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [103.985617] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [103.985741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [104.011958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.011963] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [104.012106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.012257] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [104.012287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.015788] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.040243] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.045650] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.045846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.046000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.046456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.047039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.047195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.047375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.048020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.048191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.049279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [104.049438] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [104.052079] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.076520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.080803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.080977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.081503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.081926] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [104.081949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [104.082127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.082658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.083198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.083774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [104.085129] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [104.086260] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [104.086915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [104.087124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.087312] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.087494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.088152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.088349] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [104.088376] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.099836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.124306] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.128813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.129053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.129246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.129786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.130413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.130636] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.130933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.131674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.132000] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.132880] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [104.136060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.160576] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.164817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.165238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.165411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.165900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.166473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.166637] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.166808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.167449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.167664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.168197] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [104.170795] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.195226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.200089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.200269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.201417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.201564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [104.202289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.202790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.202796] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [104.202938] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [104.226426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.226431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [104.226593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.226794] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [104.226823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [104.226992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.227502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.227690] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [104.227707] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [104.227887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.228402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.228935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.229479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [104.230784] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [104.231783] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [104.232558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [104.232738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.232908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.233070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.233680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.233858] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [104.233874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [104.234026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.235257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.235383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [104.236177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.236638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.236642] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [104.236772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [104.261432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.261436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [104.261563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.261714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [104.261729] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.264633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.369248] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [104.381526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.389891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.390317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.390688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.391381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.392274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.392650] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.393046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.394470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.394888] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.396671] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [104.399811] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.424361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.429168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.429409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.429591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.430094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.430681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.430881] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.431070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.431706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.431928] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.432033] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [104.432057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [104.435654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.460162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.465407] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.465581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.466159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.466406] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [104.466429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [104.466608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.467163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.467678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.468346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [104.469691] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [104.470663] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [104.471443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [104.471621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.471794] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.472013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.472654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.472850] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [104.472874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.475330] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.499739] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.503335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.503528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.503694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.504176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.504785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.505002] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.505187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.505879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.506107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.507201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [104.509694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.534066] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.539322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.539500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.540676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.540855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [104.541635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.542150] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.542156] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [104.542312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [104.567573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.567579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [104.567722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.567909] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [104.567935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [104.568085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.568643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.568833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [104.568849] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [104.569002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.569500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.570057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.570578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [104.571698] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [104.572482] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [104.573274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [104.573444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.573631] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.573839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.574463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.574617] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [104.574632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [104.574778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.575977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.576133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [104.576879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.577371] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.577374] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [104.577499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [104.603229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.603234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [104.603359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.603508] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [104.603523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.606787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.719885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.724823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [104.725417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.725666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.726210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.726825] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.727404] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [104.727421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [104.727636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<6> [104.727920] [IGT] i915_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [104.727949] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [104.728786] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [104.729782] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [104.730546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [104.730723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.730893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.731048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.731658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.731836] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [104.731853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [104.731997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.733126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.733301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [104.734012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.734483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.734487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [104.734625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [104.758114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.758119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [104.758252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.758413] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [104.758429] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.760770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.785199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.789789] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.789992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.790166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.790640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.791226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.791409] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.791581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.792214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.792451] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [104.792547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.792717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.793215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.793792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.793961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.794122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.794760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.794981] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [104.795065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.795225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.795723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.796290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.796459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.796620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.797260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.797487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.798553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [104.800753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [104.825129] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [104.829818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [104.829990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.830490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.830661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [104.830680] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [104.830857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.831357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.831893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.832432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [104.833704] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [104.834649] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [104.835414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [104.835586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.835741] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.835909] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.836529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.836689] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [104.836704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [104.836863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.837971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.838111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [104.838813] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.839299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.839304] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [104.839434] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [104.862445] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.862449] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [104.862577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.862728] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [104.862756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [104.862932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.863437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.863616] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [104.863629] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [104.863808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.864303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [104.864832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [104.865382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [104.866521] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [104.867636] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [104.868419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [104.868598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [104.868772] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [104.868938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [104.869546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.869725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [104.869739] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [104.869935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [104.871574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.871706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [104.872471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [104.873029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.873035] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [104.873167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [104.902118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [104.902123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [104.902261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [104.902407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [104.902422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [104.905801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [105.011917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [105.023697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [105.024546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [105.025105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [105.025957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [105.026919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [105.027448] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [105.027989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [105.028874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [105.030096] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [105.030341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<6> [105.030905] [IGT] i915_pm_rpm: exiting, ret=0
<7> [105.030959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [105.031228] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [105.031255] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [105.031495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [105.032103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [105.032669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [105.033269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [105.034594] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [105.035699] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [105.036322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [105.036504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [105.036661] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [105.036859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [105.037466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [105.037629] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [105.037653] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [105.037827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [105.039001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [105.039569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [105.040279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [105.040856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [105.040860] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [105.041014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [105.063985] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [105.063988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [105.064115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [105.064265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [105.064419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [105.064577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [105.065065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [105.065648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [105.065866] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [105.066037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [105.066634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [105.066937] Console: switching to colour frame buffer device 128x48
<7> [105.067197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [105.067339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [105.067849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [105.068382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [105.068537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [105.068680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [105.069299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2023-06-18 23:06:05