igt@i915_selftest@live@reset on fi-kbl-guc@linus-v6.4-rc7 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gb7d168f61 (x86_64) (Linux: 6.4.0-rc7-linus-v6.4-rc7-g45a3e24f65e9+ x86_64)
Out	Starting dynamic subtest: reset Dynamic subtest reset: SUCCESS (1.160s)
Err	Starting dynamic subtest: reset Dynamic subtest reset: SUCCESS (1.160s)
Dmesg	<6> [209.648586] [IGT] i915_selftest: starting dynamic subtest reset <5> [209.751607] Setting dangerous option enable_guc - tainting kernel <5> [209.751614] Setting dangerous option live_selftests - tainting kernel <7> [209.793207] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [209.793422] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [209.793568] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [209.793580] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [209.793722] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [209.793920] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [209.794043] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [209.794691] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [209.794852] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [209.795009] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [209.795173] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [209.795181] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [209.795464] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [209.795482] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [209.795613] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [209.795915] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018 <7> [209.796135] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [209.796350] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [209.796533] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [209.796696] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [209.800569] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [209.800717] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [209.800854] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [209.800988] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [209.801121] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [209.801245] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [209.801397] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [209.801546] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [209.801692] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [209.801843] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [209.801956] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [209.802052] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [209.802145] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [209.802260] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [209.802832] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [209.803006] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [209.803154] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [209.803314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [209.803455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [209.803651] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [209.803853] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [209.804054] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [209.804240] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [209.804385] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [209.804530] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [209.804731] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [209.804925] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [209.805118] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [209.805284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [209.805425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [209.805579] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [209.805775] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [209.805966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [209.806171] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [209.806317] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [209.806454] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [209.806594] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [209.806785] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [209.806973] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [209.807190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [209.807423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [209.807586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [209.807724] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [209.808251] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [209.808450] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [209.808653] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [209.808847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [209.808983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [209.809141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [209.809362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [209.809611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [209.809787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [209.809929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [209.810065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [209.810286] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [209.811327] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [209.811274] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [209.811673] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [209.811808] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [209.811941] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [209.812071] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [209.812257] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [209.812387] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [209.812516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [209.812643] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [209.812771] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [209.812896] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [209.814146] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [209.815196] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [209.815385] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present <7> [209.815540] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [209.815680] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [209.815805] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [209.816115] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default) <7> [209.816277] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [209.816431] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [209.816626] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [209.816781] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] using AUX A (VBT) <7> [209.816922] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E] <7> [209.817152] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [209.817581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [209.817746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [209.817904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [209.818042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [209.818191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [209.818359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [209.818496] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [209.818633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [209.818770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [209.818906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [209.819042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [209.819194] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [209.819380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [209.819520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [209.819657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A <7> [209.819795] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [209.819938] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [209.820079] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [209.820231] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [209.820430] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [209.820577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [209.820723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [209.820854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [209.820984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [209.821113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [209.821253] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [209.821430] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [209.821565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [209.821696] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [209.821825] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [209.821964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [209.822095] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [209.822288] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [209.822442] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [209.822603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [209.822743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [209.822881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [209.823020] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [209.823157] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [209.823309] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [209.823486] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [209.825925] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [209.826061] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [209.826190] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [209.826341] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [209.826476] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [209.827484] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [209.827625] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [209.827758] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [209.831239] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [209.831425] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [209.859892] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [209.860061] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [209.860207] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [209.860376] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [209.860509] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [209.860640] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004 <7> [209.860772] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [209.860903] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [209.861034] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [209.861173] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [209.861332] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [209.861465] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [209.861596] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [209.861727] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [209.861858] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [209.863043] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [209.863047] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [209.869811] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [209.870247] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [209.870541] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [209.870544] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [209.870547] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [209.878477] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [209.878737] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [209.878875] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [209.879009] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [209.879142] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [209.879314] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [209.879835] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [209.879945] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [209.880049] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [209.880151] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [209.883683] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [209.884011] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [209.884370] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1 <7> [209.885022] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <6> [209.885088] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [209.886984] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [209.902277] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [209.903154] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input74 <7> [209.903907] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [209.904575] [drm:drm_client_modeset_probe] <7> [209.904627] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [209.904572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [209.904652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [209.904844] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [209.904872] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [209.904797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [209.904890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [209.904907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [209.904992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [209.905090] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [209.905114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [209.905130] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [209.905147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [209.905188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [209.905348] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [209.905373] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [209.905390] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [209.905395] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [209.905399] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [209.905404] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [209.905423] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [209.905435] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [209.905458] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [209.905479] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [209.905726] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [209.905920] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [209.905924] i915 device info: graphics version: 9 <7> [209.905927] i915 device info: media version: 9 <7> [209.905930] i915 device info: display version: 9 <7> [209.905933] i915 device info: graphics stepping: F0 <7> [209.905936] i915 device info: media stepping: F0 <7> [209.905938] i915 device info: display stepping: C0 <7> [209.905941] i915 device info: base die stepping: ** <7> [209.905944] i915 device info: gt: 2 <7> [209.905946] i915 device info: memory-regions: 0x21 <7> [209.905949] i915 device info: page-sizes: 0x11000 <7> [209.905952] i915 device info: platform: KABYLAKE <7> [209.905955] i915 device info: ppgtt-size: 48 <7> [209.905957] i915 device info: ppgtt-type: 2 <7> [209.905960] i915 device info: dma_mask_size: 39 <7> [209.905963] i915 device info: is_mobile: no <7> [209.905966] i915 device info: is_lp: no <7> [209.905968] i915 device info: require_force_probe: no <7> [209.905971] i915 device info: is_dgfx: no <7> [209.905974] i915 device info: has_64bit_reloc: yes <7> [209.905976] i915 device info: has_64k_pages: no <7> [209.905979] i915 device info: gpu_reset_clobbers_display: no <7> [209.905982] i915 device info: has_reset_engine: yes <7> [209.905985] i915 device info: has_3d_pipeline: yes <7> [209.905987] i915 device info: has_4tile: no <7> [209.905990] i915 device info: has_flat_ccs: no <7> [209.905993] i915 device info: has_global_mocs: no <7> [209.905995] i915 device info: has_gmd_id: no <7> [209.905998] i915 device info: has_gt_uc: yes <7> [209.906001] i915 device info: has_heci_pxp: no <7> [209.906003] i915 device info: has_heci_gscfi: no <7> [209.906006] i915 device info: has_guc_deprivilege: no <7> [209.906009] i915 device info: has_l3_ccs_read: no <7> [209.906011] i915 device info: has_l3_dpf: no <7> [209.906014] i915 device info: has_llc: yes <7> [209.906017] i915 device info: has_logical_ring_contexts: yes <7> [209.906019] i915 device info: has_logical_ring_elsq: no <7> [209.906022] i915 device info: has_media_ratio_mode: no <7> [209.906025] i915 device info: has_mslice_steering: no <7> [209.906027] i915 device info: has_oa_bpc_reporting: no <7> [209.906030] i915 device info: has_oa_slice_contrib_limits: no <7> [209.906033] i915 device info: has_oam: no <7> [209.906035] i915 device info: has_one_eu_per_fuse_bit: no <7> [209.906038] i915 device info: has_pxp: no <7> [209.906040] i915 device info: has_rc6: yes <7> [209.906043] i915 device info: has_rc6p: no <7> [209.906046] i915 device info: has_rps: yes <7> [209.906049] i915 device info: has_runtime_pm: yes <7> [209.906051] i915 device info: has_snoop: no <7> [209.906054] i915 device info: has_coherent_ggtt: yes <7> [209.906057] i915 device info: tuning_thread_rr_after_dep: no <7> [209.906060] i915 device info: unfenced_needs_alignment: no <7> [209.906062] i915 device info: hws_needs_physical: no <7> [209.906065] i915 device info: has_pooled_eu: no <7> [209.906068] i915 device info: cursor_needs_physical: no <7> [209.906071] i915 device info: has_cdclk_crawl: no <7> [209.906073] i915 device info: has_cdclk_squash: no <7> [209.906076] i915 device info: has_ddi: yes <7> [209.906079] i915 device info: has_dp_mst: yes <7> [209.906081] i915 device info: has_dsb: no <7> [209.906084] i915 device info: has_fpga_dbg: yes <7> [209.906087] i915 device info: has_gmch: no <7> [209.906089] i915 device info: has_hotplug: yes <7> [209.906092] i915 device info: has_hti: no <7> [209.906095] i915 device info: has_ipc: yes <7> [209.906094] [drm:drm_client_modeset_probe] <7> [209.906098] i915 device info: has_overlay: no <7> [209.906101] i915 device info: has_psr: yes <7> [209.906103] i915 device info: has_psr_hw_tracking: yes <7> [209.906106] i915 device info: overlay_needs_physical: no <7> [209.906109] i915 device info: supports_tv: no <7> [209.906111] i915 device info: has_hdcp: yes <7> [209.906114] i915 device info: has_dmc: yes <7> [209.906117] i915 device info: has_dsc: no <7> [209.906119] i915 device info: rawclk rate: 24000 kHz <7> [209.906122] i915 device info: iommu: enabled <7> [209.906125] i915 device info: available engines: 40403 <7> [209.906128] i915 device info: slice total: 1, mask=0001 <7> [209.906131] i915 device info: subslice total: 3 <7> [209.906134] i915 device info: slice0: 3 subslices, mask=00000007 <7> [209.906137] i915 device info: slice1: 0 subslices, mask=00000000 <7> [209.906140] i915 device info: slice2: 0 subslices, mask=00000000 <7> [209.906143] i915 device info: EU total: 24 <7> [209.906146] i915 device info: EU per subslice: 8 <7> [209.906149] i915 device info: has slice power gating: no <7> [209.906151] i915 device info: has subslice power gating: no <7> [209.906145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [209.906154] i915 device info: has EU power gating: yes <6> [209.906157] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [209.906175] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [209.906179] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [209.906183] i915: Performing live selftests with st_random_seed=0xe869b8e1 st_timeout=500 <6> [209.906187] i915: Running reset <6> [209.906210] i915: Running intel_reset_live_selftests/igt_global_reset <7> [209.906181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [209.906371] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [209.906391] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [209.906410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [209.906594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [209.906613] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [209.906633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [209.906818] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [209.906836] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [209.906842] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [209.906847] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [209.906851] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [209.906893] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [209.906906] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [209.906932] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [209.906953] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [209.907433] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [209.907480] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [209.913816] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [209.914448] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [209.914858] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [209.914862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [209.914865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [209.915401] i915: Running intel_reset_live_selftests/igt_reset_device_stolen <6> [209.973920] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [209.973926] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [209.976205] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [209.976473] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [209.976661] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [209.976708] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [209.976711] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [210.029221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [210.035271] i915: Running intel_reset_live_selftests/igt_reset_engines_stolen <6> [210.478371] i915: Running intel_reset_live_selftests/igt_wedged_reset <7> [210.478383] intel_gt_set_wedged called from igt_wedged_reset+0x25/0x180 [i915] <6> [210.479816] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [210.479821] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [210.486839] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [210.487512] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [210.487800] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [210.487804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [210.487806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [210.487991] i915: Running intel_reset_live_selftests/igt_atomic_reset <7> [210.488137] intel_gt_set_wedged called from igt_force_reset+0xd/0xe0 [i915] <6> [210.488925] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [210.488931] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [210.491218] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 950MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [210.491444] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [210.491625] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [210.491630] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [210.491633] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [210.492323] intel_gt_set_wedged called from igt_force_reset+0xd/0xe0 [i915] <6> [210.492988] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [210.492992] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [210.495240] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 883MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [210.495538] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [210.495766] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [210.495769] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [210.495771] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [210.496476] i915: Running intel_reset_live_selftests/igt_atomic_engine_reset <7> [210.496501] intel_gt_set_wedged called from igt_force_reset+0xd/0xe0 [i915] <6> [210.497219] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [210.497223] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [210.503234] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [210.503543] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [210.503778] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [210.503782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [210.503784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [210.506837] intel_gt_set_wedged called from igt_force_reset+0xd/0xe0 [i915] <6> [210.507756] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [210.507760] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [210.510199] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [210.510428] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [210.510610] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [210.510616] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [210.510618] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [210.510853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [210.511117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [210.511329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [210.511500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [210.511638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [210.532474] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [210.571782] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [210.617666] i915: probe of 0000:00:02.0 failed with error -25 <6> [210.809171] [IGT] i915_selftest: finished subtest reset, SUCCESS

<6> [209.648586] [IGT] i915_selftest: starting dynamic subtest reset

<5> [209.751607] Setting dangerous option enable_guc - tainting kernel

<5> [209.751614] Setting dangerous option live_selftests - tainting kernel

<7> [209.793207] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [209.793422] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [209.793568] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [209.793580] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [209.793722] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [209.793920] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [209.794043] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [209.794691] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [209.794852] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [209.795009] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [209.795173] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [209.795181] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [209.795464] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [209.795482] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [209.795613] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [209.795915] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018

<7> [209.796135] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [209.796350] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [209.796533] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [209.796696] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [209.800569] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [209.800717] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [209.800854] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [209.800988] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [209.801121] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [209.801245] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [209.801397] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [209.801546] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [209.801692] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [209.801843] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [209.801956] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [209.802052] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [209.802145] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [209.802260] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [209.802832] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [209.803006] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [209.803154] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [209.803314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [209.803455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [209.803651] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [209.803853] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [209.804054] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [209.804240] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [209.804385] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [209.804530] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [209.804731] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [209.804925] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [209.805118] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [209.805284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [209.805425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [209.805579] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [209.805775] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [209.805966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [209.806171] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [209.806317] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [209.806454] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [209.806594] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [209.806785] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [209.806973] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [209.807190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [209.807423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [209.807586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [209.807724] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [209.808251] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [209.808450] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [209.808653] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [209.808847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [209.808983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [209.809141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [209.809362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [209.809611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [209.809787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [209.809929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [209.810065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [209.810286] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [209.811327] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [209.811274] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [209.811673] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [209.811808] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [209.811941] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [209.812071] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [209.812257] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [209.812387] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [209.812516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [209.812643] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [209.812771] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [209.812896] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [209.814146] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [209.815196] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [209.815385] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present

<7> [209.815540] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [209.815680] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [209.815805] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [209.816115] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default)

<7> [209.816277] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [209.816431] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [209.816626] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [209.816781] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] using AUX A (VBT)

<7> [209.816922] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]

<7> [209.817152] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [209.817581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [209.817746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [209.817904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [209.818042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [209.818191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [209.818359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [209.818496] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [209.818633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [209.818770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [209.818906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [209.819042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [209.819194] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [209.819380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [209.819520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [209.819657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [209.819795] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [209.819938] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [209.820079] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [209.820231] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [209.820430] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [209.820577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [209.820723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [209.820854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [209.820984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [209.821113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [209.821253] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [209.821430] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [209.821565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [209.821696] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [209.821825] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [209.821964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [209.822095] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [209.822288] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [209.822442] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [209.822603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [209.822743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [209.822881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [209.823020] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [209.823157] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [209.823309] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [209.823486] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [209.825925] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [209.826061] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [209.826190] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [209.826341] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [209.826476] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [209.827484] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [209.827625] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [209.827758] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [209.831239] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [209.831425] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [209.859892] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [209.860061] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [209.860207] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [209.860376] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [209.860509] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [209.860640] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004

<7> [209.860772] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [209.860903] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [209.861034] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [209.861173] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [209.861332] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [209.861465] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [209.861596] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [209.861727] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [209.861858] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [209.863043] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [209.863047] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [209.869811] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [209.870247] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [209.870541] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [209.870544] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [209.870547] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [209.878477] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [209.878737] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [209.878875] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [209.879009] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [209.879142] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [209.879314] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [209.879835] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [209.879945] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [209.880049] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [209.880151] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [209.883683] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [209.884011] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [209.884370] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1

<7> [209.885022] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<6> [209.885088] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [209.886984] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [209.902277] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [209.903154] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input74

<7> [209.903907] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [209.904575] [drm:drm_client_modeset_probe]

<7> [209.904627] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [209.904572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [209.904652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [209.904844] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [209.904872] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [209.904797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [209.904890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [209.904907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [209.904992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [209.905090] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [209.905114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [209.905130] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [209.905147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [209.905188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [209.905348] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [209.905373] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [209.905390] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [209.905395] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [209.905399] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [209.905404] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [209.905423] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [209.905435] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [209.905458] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [209.905479] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [209.905726] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [209.905920] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [209.905924] i915 device info: graphics version: 9

<7> [209.905927] i915 device info: media version: 9

<7> [209.905930] i915 device info: display version: 9

<7> [209.905933] i915 device info: graphics stepping: F0

<7> [209.905936] i915 device info: media stepping: F0

<7> [209.905938] i915 device info: display stepping: C0

<7> [209.905941] i915 device info: base die stepping: **

<7> [209.905944] i915 device info: gt: 2

<7> [209.905946] i915 device info: memory-regions: 0x21

<7> [209.905949] i915 device info: page-sizes: 0x11000

<7> [209.905952] i915 device info: platform: KABYLAKE

<7> [209.905955] i915 device info: ppgtt-size: 48

<7> [209.905957] i915 device info: ppgtt-type: 2

<7> [209.905960] i915 device info: dma_mask_size: 39

<7> [209.905963] i915 device info: is_mobile: no

<7> [209.905966] i915 device info: is_lp: no

<7> [209.905968] i915 device info: require_force_probe: no

<7> [209.905971] i915 device info: is_dgfx: no

<7> [209.905974] i915 device info: has_64bit_reloc: yes

<7> [209.905976] i915 device info: has_64k_pages: no

<7> [209.905979] i915 device info: gpu_reset_clobbers_display: no

<7> [209.905982] i915 device info: has_reset_engine: yes

<7> [209.905985] i915 device info: has_3d_pipeline: yes

<7> [209.905987] i915 device info: has_4tile: no

<7> [209.905990] i915 device info: has_flat_ccs: no

<7> [209.905993] i915 device info: has_global_mocs: no

<7> [209.905995] i915 device info: has_gmd_id: no

<7> [209.905998] i915 device info: has_gt_uc: yes

<7> [209.906001] i915 device info: has_heci_pxp: no

<7> [209.906003] i915 device info: has_heci_gscfi: no

<7> [209.906006] i915 device info: has_guc_deprivilege: no

<7> [209.906009] i915 device info: has_l3_ccs_read: no

<7> [209.906011] i915 device info: has_l3_dpf: no

<7> [209.906014] i915 device info: has_llc: yes

<7> [209.906017] i915 device info: has_logical_ring_contexts: yes

<7> [209.906019] i915 device info: has_logical_ring_elsq: no

<7> [209.906022] i915 device info: has_media_ratio_mode: no

<7> [209.906025] i915 device info: has_mslice_steering: no

<7> [209.906027] i915 device info: has_oa_bpc_reporting: no

<7> [209.906030] i915 device info: has_oa_slice_contrib_limits: no

<7> [209.906033] i915 device info: has_oam: no

<7> [209.906035] i915 device info: has_one_eu_per_fuse_bit: no

<7> [209.906038] i915 device info: has_pxp: no

<7> [209.906040] i915 device info: has_rc6: yes

<7> [209.906043] i915 device info: has_rc6p: no

<7> [209.906046] i915 device info: has_rps: yes

<7> [209.906049] i915 device info: has_runtime_pm: yes

<7> [209.906051] i915 device info: has_snoop: no

<7> [209.906054] i915 device info: has_coherent_ggtt: yes

<7> [209.906057] i915 device info: tuning_thread_rr_after_dep: no

<7> [209.906060] i915 device info: unfenced_needs_alignment: no

<7> [209.906062] i915 device info: hws_needs_physical: no

<7> [209.906065] i915 device info: has_pooled_eu: no

<7> [209.906068] i915 device info: cursor_needs_physical: no

<7> [209.906071] i915 device info: has_cdclk_crawl: no

<7> [209.906073] i915 device info: has_cdclk_squash: no

<7> [209.906076] i915 device info: has_ddi: yes

<7> [209.906079] i915 device info: has_dp_mst: yes

<7> [209.906081] i915 device info: has_dsb: no

<7> [209.906084] i915 device info: has_fpga_dbg: yes

<7> [209.906087] i915 device info: has_gmch: no

<7> [209.906089] i915 device info: has_hotplug: yes

<7> [209.906092] i915 device info: has_hti: no

<7> [209.906095] i915 device info: has_ipc: yes

<7> [209.906094] [drm:drm_client_modeset_probe]

<7> [209.906098] i915 device info: has_overlay: no

<7> [209.906101] i915 device info: has_psr: yes

<7> [209.906103] i915 device info: has_psr_hw_tracking: yes

<7> [209.906106] i915 device info: overlay_needs_physical: no

<7> [209.906109] i915 device info: supports_tv: no

<7> [209.906111] i915 device info: has_hdcp: yes

<7> [209.906114] i915 device info: has_dmc: yes

<7> [209.906117] i915 device info: has_dsc: no

<7> [209.906119] i915 device info: rawclk rate: 24000 kHz

<7> [209.906122] i915 device info: iommu: enabled

<7> [209.906125] i915 device info: available engines: 40403

<7> [209.906128] i915 device info: slice total: 1, mask=0001

<7> [209.906131] i915 device info: subslice total: 3

<7> [209.906134] i915 device info: slice0: 3 subslices, mask=00000007

<7> [209.906137] i915 device info: slice1: 0 subslices, mask=00000000

<7> [209.906140] i915 device info: slice2: 0 subslices, mask=00000000

<7> [209.906143] i915 device info: EU total: 24

<7> [209.906146] i915 device info: EU per subslice: 8

<7> [209.906149] i915 device info: has slice power gating: no

<7> [209.906151] i915 device info: has subslice power gating: no

<7> [209.906145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [209.906154] i915 device info: has EU power gating: yes

<6> [209.906157] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [209.906175] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [209.906179] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [209.906183] i915: Performing live selftests with st_random_seed=0xe869b8e1 st_timeout=500

<6> [209.906210] i915: Running intel_reset_live_selftests/igt_global_reset

<7> [209.906181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [209.906371] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [209.906391] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [209.906410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [209.906594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [209.906613] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [209.906633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [209.906818] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [209.906836] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [209.906842] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [209.906847] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [209.906851] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [209.906893] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [209.906906] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [209.906932] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [209.906953] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [209.907433] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [209.907480] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [209.913816] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [209.914448] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [209.914858] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [209.914862] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [209.914865] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [209.915401] i915: Running intel_reset_live_selftests/igt_reset_device_stolen

<6> [209.973920] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [209.973926] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [209.976205] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [209.976473] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [209.976661] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [209.976708] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [209.976711] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [210.029221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [210.035271] i915: Running intel_reset_live_selftests/igt_reset_engines_stolen

<6> [210.478371] i915: Running intel_reset_live_selftests/igt_wedged_reset

<7> [210.478383] intel_gt_set_wedged called from igt_wedged_reset+0x25/0x180 [i915]

<6> [210.479816] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [210.479821] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [210.486839] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [210.487512] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [210.487800] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [210.487804] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [210.487806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [210.487991] i915: Running intel_reset_live_selftests/igt_atomic_reset

<7> [210.488137] intel_gt_set_wedged called from igt_force_reset+0xd/0xe0 [i915]

<6> [210.488925] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [210.488931] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [210.491218] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 950MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [210.491444] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [210.491625] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [210.491630] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [210.491633] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [210.492323] intel_gt_set_wedged called from igt_force_reset+0xd/0xe0 [i915]

<6> [210.492988] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [210.492992] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [210.495240] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 350MHz, before = 883MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [210.495538] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [210.495766] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [210.495769] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [210.495771] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [210.496476] i915: Running intel_reset_live_selftests/igt_atomic_engine_reset

<7> [210.496501] intel_gt_set_wedged called from igt_force_reset+0xd/0xe0 [i915]

<6> [210.497219] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [210.497223] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [210.503234] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [210.503543] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [210.503778] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [210.503782] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [210.503784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [210.506837] intel_gt_set_wedged called from igt_force_reset+0xd/0xe0 [i915]

<6> [210.507756] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [210.507760] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [210.510199] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [210.510428] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [210.510610] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [210.510616] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [210.510618] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [210.510853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [210.511117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [210.511329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [210.511500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [210.511638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [210.532474] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [210.571782] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [210.617666] i915: probe of 0000:00:02.0 failed with error -25

<6> [210.809171] [IGT] i915_selftest: finished subtest reset, SUCCESS

Results for igt@i915_selftest@live@reset