igt@i915_module_load@reload on fi-kbl-guc@linus-v6.4-rc7 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gb7d168f61 (x86_64) (Linux: 6.4.0-rc7-linus-v6.4-rc7-g45a3e24f65e9+ x86_64)
Out	Starting subtest: reload Opened device: /dev/dri/card0 Subtest reload: SUCCESS (1.624s)
Err	Starting subtest: reload Subtest reload: SUCCESS (1.624s)
Dmesg	<6> [131.677578] [IGT] i915_module_load: executing <6> [131.679063] [IGT] i915_module_load: starting subtest reload <7> [131.819330] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.828018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [131.829096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [131.829632] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.829886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.830389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [131.830546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [131.830656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.830898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.831465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [131.831488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [131.831633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [131.831639] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [131.831634] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [131.831743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [131.834575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [131.834580] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [131.834689] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [131.834706] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [131.835024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [131.835129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [131.835431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [131.835552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [131.835556] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [131.835660] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [131.838310] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [131.838436] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [131.838575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [131.838555] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [131.838580] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [131.838687] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1 <7> [131.838672] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [131.838702] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [131.838838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1 <7> [131.838790] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [131.838907] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [131.839025] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [131.839142] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [131.839280] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [131.839714] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [131.839911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [131.840077] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.840213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.840769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.985044] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [132.059061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.059805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [132.060818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.061846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [132.062832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [132.063574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [132.064314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [132.065097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [132.101752] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [132.157709] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <5> [133.080594] Setting dangerous option enable_guc - tainting kernel <7> [133.122096] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [133.122317] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [133.122454] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [133.122466] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [133.122604] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [133.122843] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [133.122960] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [133.123552] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [133.123667] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [133.123773] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [133.123876] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [133.123881] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [133.124361] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [133.124379] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [133.124510] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [133.124803] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018 <7> [133.124956] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [133.125085] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [133.125250] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [133.125384] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [133.129195] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [133.129402] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [133.129582] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [133.129761] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [133.129941] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [133.130088] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [133.130294] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [133.130440] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [133.130622] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [133.130783] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [133.130980] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [133.131209] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [133.131401] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [133.131575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [133.132179] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [133.132324] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [133.132468] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [133.132610] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [133.132752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [133.132893] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [133.133034] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [133.133189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [133.133333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [133.133474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [133.133615] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [133.133755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [133.133891] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [133.134027] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [133.134170] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [133.134312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [133.134451] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [133.134592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [133.134728] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [133.134864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [133.134999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [133.135135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [133.135283] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [133.135421] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [133.135557] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [133.135704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.135879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [133.136033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [133.136184] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [133.136807] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [133.136950] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [133.137101] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [133.137302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.137439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [133.137576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [133.137722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [133.137894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [133.138032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [133.138183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [133.138323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [133.138493] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [133.139525] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [133.139899] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [133.140408] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [133.140598] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [133.140782] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [133.140970] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [133.141135] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [133.141323] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [133.141507] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [133.141690] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [133.141850] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [133.142032] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [133.143900] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [133.145447] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [133.145702] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present <7> [133.145921] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [133.146120] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [133.146313] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [133.146732] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default) <7> [133.146927] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [133.147109] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [133.147389] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [133.147598] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] using AUX A (VBT) <7> [133.147798] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E] <7> [133.148136] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [133.148626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [133.148837] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [133.149069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [133.149283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [133.149481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [133.149681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [133.149879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [133.150078] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [133.150287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [133.150487] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [133.150649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [133.150843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [133.151041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [133.151252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [133.151450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A <7> [133.151595] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [133.151794] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [133.151995] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [133.152205] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [133.152448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [133.152658] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [133.152863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [133.153053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [133.153252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [133.153439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [133.153625] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [133.153819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [133.154008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [133.154187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [133.154372] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [133.154567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [133.154757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [133.154943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [133.155130] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [133.155354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [133.155533] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [133.155725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [133.155922] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [133.156113] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [133.156312] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [133.156497] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [133.160665] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [133.160853] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [133.161019] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [133.161204] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [133.161399] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [133.162700] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [133.162896] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [133.163087] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [133.167979] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [133.168231] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [133.207766] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [133.207949] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [133.208089] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [133.208240] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [133.208390] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [133.208522] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004 <7> [133.208653] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [133.208783] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [133.208914] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [133.209045] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [133.209185] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [133.209333] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [133.209465] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [133.209597] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [133.209729] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [133.210894] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [133.210898] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [133.217201] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [133.217621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [133.217901] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [133.217905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [133.217907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [133.226358] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [133.226606] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [133.226745] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [133.226879] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [133.227012] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [133.227184] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [133.227667] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [133.227776] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [133.227879] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [133.227981] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [133.230626] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [133.231137] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [133.231653] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1 <7> [133.232803] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <6> [133.232876] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [133.235569] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [133.249939] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [133.250991] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21 <7> [133.251677] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [133.252211] [drm:drm_client_modeset_probe] <7> [133.252262] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [133.252212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [133.252287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [133.252396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [133.252541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [133.252711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [133.253283] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [133.253434] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [133.253438] i915 device info: graphics version: 9 <7> [133.253440] i915 device info: media version: 9 <7> [133.253442] i915 device info: display version: 9 <7> [133.253443] i915 device info: graphics stepping: F0 <7> [133.253445] i915 device info: media stepping: F0 <7> [133.253447] i915 device info: display stepping: C0 <7> [133.253449] i915 device info: base die stepping: ** <7> [133.253451] i915 device info: gt: 2 <7> [133.253453] i915 device info: memory-regions: 0x21 <7> [133.253454] i915 device info: page-sizes: 0x11000 <7> [133.253456] i915 device info: platform: KABYLAKE <7> [133.253458] i915 device info: ppgtt-size: 48 <7> [133.253460] i915 device info: ppgtt-type: 2 <7> [133.253461] i915 device info: dma_mask_size: 39 <7> [133.253463] i915 device info: is_mobile: no <7> [133.253465] i915 device info: is_lp: no <7> [133.253467] i915 device info: require_force_probe: no <7> [133.253468] i915 device info: is_dgfx: no <7> [133.253470] i915 device info: has_64bit_reloc: yes <7> [133.253472] i915 device info: has_64k_pages: no <7> [133.253474] i915 device info: gpu_reset_clobbers_display: no <7> [133.253475] i915 device info: has_reset_engine: yes <7> [133.253477] i915 device info: has_3d_pipeline: yes <7> [133.253479] i915 device info: has_4tile: no <7> [133.253481] i915 device info: has_flat_ccs: no <7> [133.253482] i915 device info: has_global_mocs: no <7> [133.253484] i915 device info: has_gmd_id: no <7> [133.253486] i915 device info: has_gt_uc: yes <7> [133.253488] i915 device info: has_heci_pxp: no <7> [133.253489] i915 device info: has_heci_gscfi: no <7> [133.253491] i915 device info: has_guc_deprivilege: no <7> [133.253493] i915 device info: has_l3_ccs_read: no <7> [133.253495] i915 device info: has_l3_dpf: no <7> [133.253496] i915 device info: has_llc: yes <7> [133.253498] i915 device info: has_logical_ring_contexts: yes <7> [133.253500] i915 device info: has_logical_ring_elsq: no <7> [133.253501] i915 device info: has_media_ratio_mode: no <7> [133.253503] i915 device info: has_mslice_steering: no <7> [133.253505] i915 device info: has_oa_bpc_reporting: no <7> [133.253507] i915 device info: has_oa_slice_contrib_limits: no <7> [133.253508] i915 device info: has_oam: no <7> [133.253510] i915 device info: has_one_eu_per_fuse_bit: no <7> [133.253512] i915 device info: has_pxp: no <7> [133.253513] i915 device info: has_rc6: yes <7> [133.253515] i915 device info: has_rc6p: no <7> [133.253517] i915 device info: has_rps: yes <7> [133.253519] i915 device info: has_runtime_pm: yes <7> [133.253520] i915 device info: has_snoop: no <7> [133.253522] i915 device info: has_coherent_ggtt: yes <7> [133.253524] i915 device info: tuning_thread_rr_after_dep: no <7> [133.253525] i915 device info: unfenced_needs_alignment: no <7> [133.253527] i915 device info: hws_needs_physical: no <7> [133.253529] i915 device info: has_pooled_eu: no <7> [133.253531] i915 device info: cursor_needs_physical: no <7> [133.253532] i915 device info: has_cdclk_crawl: no <7> [133.253534] i915 device info: has_cdclk_squash: no <7> [133.253536] i915 device info: has_ddi: yes <7> [133.253537] i915 device info: has_dp_mst: yes <7> [133.253539] i915 device info: has_dsb: no <7> [133.253541] i915 device info: has_fpga_dbg: yes <7> [133.253543] i915 device info: has_gmch: no <7> [133.253544] i915 device info: has_hotplug: yes <7> [133.253546] i915 device info: has_hti: no <7> [133.253548] i915 device info: has_ipc: yes <7> [133.253549] i915 device info: has_overlay: no <7> [133.253551] i915 device info: has_psr: yes <7> [133.253553] i915 device info: has_psr_hw_tracking: yes <7> [133.253555] i915 device info: overlay_needs_physical: no <7> [133.253556] i915 device info: supports_tv: no <7> [133.253558] i915 device info: has_hdcp: yes <7> [133.253560] i915 device info: has_dmc: yes <7> [133.253561] i915 device info: has_dsc: no <7> [133.253563] i915 device info: rawclk rate: 24000 kHz <7> [133.253565] i915 device info: iommu: enabled <7> [133.253567] i915 device info: available engines: 40403 <7> [133.253569] i915 device info: slice total: 1, mask=0001 <7> [133.253571] i915 device info: subslice total: 3 <7> [133.253573] i915 device info: slice0: 3 subslices, mask=00000007 <7> [133.253575] i915 device info: slice1: 0 subslices, mask=00000000 <7> [133.253577] i915 device info: slice2: 0 subslices, mask=00000000 <7> [133.253579] i915 device info: EU total: 24 <7> [133.253581] i915 device info: EU per subslice: 8 <7> [133.253583] i915 device info: has slice power gating: no <7> [133.253584] i915 device info: has subslice power gating: no <7> [133.253586] i915 device info: has EU power gating: yes <6> [133.253588] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [133.253590] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [133.253592] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [133.253502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.253698] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.254076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.254300] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.254308] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.254488] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [133.257581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.257590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [133.257820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [133.258207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [133.258413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.258612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.259267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.259599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [133.259730] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [133.259827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [133.259846] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [133.260101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.261330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [133.261516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [133.261890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [133.262393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [133.262400] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.262583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [133.277825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [133.277835] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [133.277994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.278148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [133.278187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [133.278206] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [133.278218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [133.278363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.278884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.279036] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [133.279056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [133.279071] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [133.279075] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [133.279078] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [133.279081] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [133.279094] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [133.279102] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [133.279117] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [133.279132] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [133.279418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.279568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [133.280031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.280644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [133.280792] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.280931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.281514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.281773] [drm:drm_client_modeset_probe] <7> [133.281810] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [133.281826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [133.282026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.283222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.283347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.283928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.284451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.284458] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.284584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [133.290438] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [133.290944] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [133.291308] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [133.292354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [133.292920] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.294702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.294711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [133.294877] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [133.294899] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [133.294916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [133.295347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [133.295503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [133.295847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [133.296018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [133.296025] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.296196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [133.299564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [133.299571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [133.299695] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [133.299712] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [133.299724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [133.300052] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [133.300066] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [133.300070] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [133.300073] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [133.300075] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [133.300107] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [133.300115] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [133.300134] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [133.300149] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [133.300267] [drm:drm_client_modeset_probe] <7> [133.300340] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [133.300354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <6> [133.300351] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [133.300561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [133.300687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.300801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.300915] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [133.301124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.301365] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.301372] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.301528] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <6> [133.303381] [IGT] i915_module_load: finished subtest reload, SUCCESS <6> [133.303540] [IGT] i915_module_load: exiting, ret=0 <7> [133.304907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.304916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [133.305073] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [133.305090] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [133.305101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [133.305477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [133.305633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [133.305971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [133.306096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [133.306101] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.306230] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [133.309360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [133.309368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [133.309561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [133.309585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [133.309603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [133.309799] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [133.309818] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [133.309823] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [133.309828] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [133.309832] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [133.309878] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [133.309890] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [133.309917] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [133.309938] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [131.677578] [IGT] i915_module_load: executing

<6> [131.679063] [IGT] i915_module_load: starting subtest reload

<7> [131.819330] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.828018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [131.829096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [131.829632] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.829886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.830389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [131.830546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [131.830656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.830898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.831465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [131.831488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [131.831633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [131.831639] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [131.831634] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [131.831743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [131.834575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [131.834580] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [131.834689] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [131.834706] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [131.835024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [131.835129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [131.835431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [131.835552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [131.835556] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [131.835660] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [131.838310] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [131.838436] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [131.838575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [131.838555] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [131.838580] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [131.838687] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1

<7> [131.838672] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [131.838702] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [131.838838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1

<7> [131.838790] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [131.838907] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [131.839025] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [131.839142] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [131.839280] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [131.839714] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [131.839911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [131.840077] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.840213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.840769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.985044] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [132.059061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.059805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [132.060818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.061846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [132.062832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [132.063574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [132.064314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [132.065097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [132.101752] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [132.157709] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<5> [133.080594] Setting dangerous option enable_guc - tainting kernel

<7> [133.122096] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [133.122317] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [133.122454] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [133.122466] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [133.122604] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [133.122843] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [133.122960] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [133.123552] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [133.123667] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [133.123773] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [133.123876] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [133.123881] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [133.124361] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [133.124379] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [133.124510] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [133.124803] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018

<7> [133.124956] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [133.125085] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [133.125250] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [133.125384] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [133.129195] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [133.129402] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [133.129582] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [133.129761] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [133.129941] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [133.130088] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [133.130294] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [133.130440] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [133.130622] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [133.130783] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [133.130980] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [133.131209] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [133.131401] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [133.131575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [133.132179] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [133.132324] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [133.132468] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [133.132610] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [133.132752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [133.132893] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [133.133034] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [133.133189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [133.133333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [133.133474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [133.133615] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [133.133755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [133.133891] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [133.134027] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [133.134170] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [133.134312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [133.134451] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [133.134592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [133.134728] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [133.134864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [133.134999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [133.135135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [133.135283] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [133.135421] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [133.135557] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [133.135704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.135879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [133.136033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [133.136184] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [133.136807] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [133.136950] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [133.137101] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [133.137302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.137439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [133.137576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [133.137722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [133.137894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [133.138032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [133.138183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [133.138323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [133.138493] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [133.139525] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [133.139899] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [133.140408] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [133.140598] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [133.140782] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [133.140970] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [133.141135] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [133.141323] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [133.141507] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [133.141690] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [133.141850] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [133.142032] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [133.143900] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [133.145447] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [133.145702] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present

<7> [133.145921] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [133.146120] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [133.146313] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [133.146732] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default)

<7> [133.146927] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [133.147109] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [133.147389] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [133.147598] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] using AUX A (VBT)

<7> [133.147798] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]

<7> [133.148136] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [133.148626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [133.148837] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [133.149069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [133.149283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [133.149481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [133.149681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [133.149879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [133.150078] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [133.150287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [133.150487] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [133.150649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [133.150843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [133.151041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [133.151252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [133.151450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [133.151595] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [133.151794] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [133.151995] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [133.152205] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [133.152448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [133.152658] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [133.152863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [133.153053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [133.153252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [133.153439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [133.153625] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [133.153819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [133.154008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [133.154187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [133.154372] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [133.154567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [133.154757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [133.154943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [133.155130] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [133.155354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [133.155533] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [133.155725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [133.155922] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [133.156113] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [133.156312] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [133.156497] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [133.160665] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [133.160853] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [133.161019] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [133.161204] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [133.161399] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [133.162700] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [133.162896] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [133.163087] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [133.167979] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [133.168231] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [133.207766] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [133.207949] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [133.208089] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [133.208240] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [133.208390] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [133.208522] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004

<7> [133.208653] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [133.208783] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [133.208914] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [133.209045] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [133.209185] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [133.209333] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [133.209465] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [133.209597] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [133.209729] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [133.210894] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [133.210898] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [133.217201] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [133.217621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [133.217901] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [133.217905] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [133.217907] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [133.226358] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [133.226606] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [133.226745] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [133.226879] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [133.227012] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [133.227184] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [133.227667] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [133.227776] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [133.227879] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [133.227981] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [133.230626] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [133.231137] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [133.231653] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1

<7> [133.232803] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<6> [133.232876] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [133.235569] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [133.249939] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [133.250991] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21

<7> [133.251677] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [133.252211] [drm:drm_client_modeset_probe]

<7> [133.252262] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [133.252212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [133.252287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [133.252396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [133.252541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [133.252711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [133.253283] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [133.253434] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [133.253438] i915 device info: graphics version: 9

<7> [133.253440] i915 device info: media version: 9

<7> [133.253442] i915 device info: display version: 9

<7> [133.253443] i915 device info: graphics stepping: F0

<7> [133.253445] i915 device info: media stepping: F0

<7> [133.253447] i915 device info: display stepping: C0

<7> [133.253449] i915 device info: base die stepping: **

<7> [133.253451] i915 device info: gt: 2

<7> [133.253453] i915 device info: memory-regions: 0x21

<7> [133.253454] i915 device info: page-sizes: 0x11000

<7> [133.253456] i915 device info: platform: KABYLAKE

<7> [133.253458] i915 device info: ppgtt-size: 48

<7> [133.253460] i915 device info: ppgtt-type: 2

<7> [133.253461] i915 device info: dma_mask_size: 39

<7> [133.253463] i915 device info: is_mobile: no

<7> [133.253465] i915 device info: is_lp: no

<7> [133.253467] i915 device info: require_force_probe: no

<7> [133.253468] i915 device info: is_dgfx: no

<7> [133.253470] i915 device info: has_64bit_reloc: yes

<7> [133.253472] i915 device info: has_64k_pages: no

<7> [133.253474] i915 device info: gpu_reset_clobbers_display: no

<7> [133.253475] i915 device info: has_reset_engine: yes

<7> [133.253477] i915 device info: has_3d_pipeline: yes

<7> [133.253479] i915 device info: has_4tile: no

<7> [133.253481] i915 device info: has_flat_ccs: no

<7> [133.253482] i915 device info: has_global_mocs: no

<7> [133.253484] i915 device info: has_gmd_id: no

<7> [133.253486] i915 device info: has_gt_uc: yes

<7> [133.253488] i915 device info: has_heci_pxp: no

<7> [133.253489] i915 device info: has_heci_gscfi: no

<7> [133.253491] i915 device info: has_guc_deprivilege: no

<7> [133.253493] i915 device info: has_l3_ccs_read: no

<7> [133.253495] i915 device info: has_l3_dpf: no

<7> [133.253496] i915 device info: has_llc: yes

<7> [133.253498] i915 device info: has_logical_ring_contexts: yes

<7> [133.253500] i915 device info: has_logical_ring_elsq: no

<7> [133.253501] i915 device info: has_media_ratio_mode: no

<7> [133.253503] i915 device info: has_mslice_steering: no

<7> [133.253505] i915 device info: has_oa_bpc_reporting: no

<7> [133.253507] i915 device info: has_oa_slice_contrib_limits: no

<7> [133.253508] i915 device info: has_oam: no

<7> [133.253510] i915 device info: has_one_eu_per_fuse_bit: no

<7> [133.253512] i915 device info: has_pxp: no

<7> [133.253513] i915 device info: has_rc6: yes

<7> [133.253515] i915 device info: has_rc6p: no

<7> [133.253517] i915 device info: has_rps: yes

<7> [133.253519] i915 device info: has_runtime_pm: yes

<7> [133.253520] i915 device info: has_snoop: no

<7> [133.253522] i915 device info: has_coherent_ggtt: yes

<7> [133.253524] i915 device info: tuning_thread_rr_after_dep: no

<7> [133.253525] i915 device info: unfenced_needs_alignment: no

<7> [133.253527] i915 device info: hws_needs_physical: no

<7> [133.253529] i915 device info: has_pooled_eu: no

<7> [133.253531] i915 device info: cursor_needs_physical: no

<7> [133.253532] i915 device info: has_cdclk_crawl: no

<7> [133.253534] i915 device info: has_cdclk_squash: no

<7> [133.253536] i915 device info: has_ddi: yes

<7> [133.253537] i915 device info: has_dp_mst: yes

<7> [133.253539] i915 device info: has_dsb: no

<7> [133.253541] i915 device info: has_fpga_dbg: yes

<7> [133.253543] i915 device info: has_gmch: no

<7> [133.253544] i915 device info: has_hotplug: yes

<7> [133.253546] i915 device info: has_hti: no

<7> [133.253548] i915 device info: has_ipc: yes

<7> [133.253549] i915 device info: has_overlay: no

<7> [133.253551] i915 device info: has_psr: yes

<7> [133.253553] i915 device info: has_psr_hw_tracking: yes

<7> [133.253555] i915 device info: overlay_needs_physical: no

<7> [133.253556] i915 device info: supports_tv: no

<7> [133.253558] i915 device info: has_hdcp: yes

<7> [133.253560] i915 device info: has_dmc: yes

<7> [133.253561] i915 device info: has_dsc: no

<7> [133.253563] i915 device info: rawclk rate: 24000 kHz

<7> [133.253565] i915 device info: iommu: enabled

<7> [133.253567] i915 device info: available engines: 40403

<7> [133.253569] i915 device info: slice total: 1, mask=0001

<7> [133.253571] i915 device info: subslice total: 3

<7> [133.253573] i915 device info: slice0: 3 subslices, mask=00000007

<7> [133.253575] i915 device info: slice1: 0 subslices, mask=00000000

<7> [133.253577] i915 device info: slice2: 0 subslices, mask=00000000

<7> [133.253579] i915 device info: EU total: 24

<7> [133.253581] i915 device info: EU per subslice: 8

<7> [133.253583] i915 device info: has slice power gating: no

<7> [133.253584] i915 device info: has subslice power gating: no

<7> [133.253586] i915 device info: has EU power gating: yes

<6> [133.253588] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [133.253590] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [133.253592] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [133.253502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.253698] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.254076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.254300] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.254308] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.254488] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [133.257581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.257590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [133.257820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [133.258207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [133.258413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.258612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.259267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.259599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [133.259730] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [133.259827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [133.259846] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [133.260101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.261330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [133.261516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [133.261890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [133.262393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [133.262400] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.262583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [133.277825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [133.277835] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [133.277994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.278148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [133.278187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [133.278206] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [133.278218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [133.278363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.278884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.279036] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [133.279056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [133.279071] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [133.279075] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [133.279078] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [133.279081] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [133.279094] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [133.279102] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [133.279117] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [133.279132] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [133.279418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.279568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [133.280031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.280644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [133.280792] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.280931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.281514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.281773] [drm:drm_client_modeset_probe]

<7> [133.281810] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [133.281826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [133.282026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.283222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.283347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.283928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.284451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.284458] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.284584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [133.290438] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [133.290944] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [133.291308] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [133.292354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [133.292920] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.294702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.294711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [133.294877] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [133.294899] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [133.294916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [133.295347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [133.295503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [133.295847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [133.296018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [133.296025] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.296196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [133.299564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [133.299571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [133.299695] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [133.299712] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [133.299724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [133.300052] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [133.300066] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [133.300070] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [133.300073] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [133.300075] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [133.300107] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [133.300115] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [133.300134] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [133.300149] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [133.300267] [drm:drm_client_modeset_probe]

<7> [133.300340] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [133.300354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<6> [133.300351] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [133.300561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [133.300687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.300801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.300915] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [133.301124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.301365] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.301372] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.301528] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<6> [133.303381] [IGT] i915_module_load: finished subtest reload, SUCCESS

<6> [133.303540] [IGT] i915_module_load: exiting, ret=0

<7> [133.304907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.304916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [133.305073] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [133.305090] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [133.305101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [133.305477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [133.305633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [133.305971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [133.306096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [133.306101] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.306230] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [133.309360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [133.309368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [133.309561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [133.309585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [133.309603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [133.309799] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [133.309818] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [133.309823] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [133.309828] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [133.309832] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [133.309878] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [133.309890] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [133.309917] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [133.309938] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

Results for igt@i915_module_load@reload