igt@kms_force_connector_basic@force-connector-state on bat-rplp-1@linus-v6.4-rc7 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gb7d168f61 (x86_64) (Linux: 6.4.0-rc7-linus-v6.4-rc7-g45a3e24f65e9+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (1.269s)
Err	Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (1.269s)
Dmesg	<6> [184.194783] Console: switching to colour dummy device 80x25 <6> [184.195357] [IGT] kms_force_connector_basic: executing <7> [184.198080] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [184.198633] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [184.198793] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [184.199696] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [184.199730] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [184.199766] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [184.251222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [184.268320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.268328] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.268464] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [184.285352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.285356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [184.285562] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [184.285619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [184.285636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [184.337192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [184.354317] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.354322] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.354434] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [184.371340] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.371344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [184.371440] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [184.371504] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [184.371519] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [184.422190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [184.439307] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.439311] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.439417] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [184.456318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.456322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [184.456422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <6> [184.456618] [IGT] kms_force_connector_basic: starting subtest force-connector-state <7> [184.462606] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] <7> [184.462621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1] <7> [184.462785] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected <7> [184.463185] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [184.463196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [184.514188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [184.531334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.531338] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.531446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [184.548330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.548333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [184.548433] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [184.548876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] <7> [184.548888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2] <7> [184.549042] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] disconnected <7> [184.549419] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] <7> [184.549430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3] <7> [184.549572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] disconnected <7> [184.550063] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7> [184.550074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [184.550887] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00 <7> [184.550996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [184.551607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes <7> [184.551702] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [184.551796] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [184.551886] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [184.552003] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [184.552008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [184.552011] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [184.552013] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [184.552027] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [184.552127] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [184.552908] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [184.553015] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [184.553693] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7> [184.553707] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa <7> [184.553712] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa <7> [184.553730] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] <7> [184.553741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1] <7> [184.553893] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected <7> [184.553913] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [184.553923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [184.605196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [184.622325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.622331] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.622463] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [184.639299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [184.639303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [184.639409] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [184.639442] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] <7> [184.639457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2] <7> [184.639641] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] disconnected <7> [184.639661] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] <7> [184.639671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3] <7> [184.639809] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] disconnected <7> [184.710720] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [184.711159] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.enable (expected 1, found 0) <7> [184.711832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.active (expected 1, found 0) <7> [184.712436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in cpu_transcoder (expected 0, found -1) <7> [184.712941] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in lane_count (expected 2, found 0) <7> [184.713486] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in dp_m_n (expected tu 64 data 6467616/8388608 link 269484/524288, found tu 0, data 0/0 link 0/0) <7> [184.713932] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in output_types (expected 0x00000100, found 0x00000000) <7> [184.714393] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in framestart_delay (expected 1, found 0) <7> [184.714809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [184.715208] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [184.715591] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [184.715949] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [184.716319] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [184.716655] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [184.716999] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [184.717296] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vtotal (expected 1112, found 0) <7> [184.717408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [184.717519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vblank_end (expected 1112, found 0) <7> [184.717627] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [184.717735] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [184.717845] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [184.717953] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [184.718075] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [184.718185] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [184.718298] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [184.718408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [184.718518] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [184.718630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vtotal (expected 1112, found 0) <7> [184.718740] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [184.718849] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vblank_end (expected 1112, found 0) <7> [184.718961] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [184.719083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [184.719192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in pixel_multiplier (expected 1, found 0) <7> [184.719298] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [184.719406] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [184.719512] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in pipe_bpp (expected 24, found 0) <7> [184.719621] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_clock (expected 138780, found 0) <7> [184.719730] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_clock (expected 138780, found 0) <7> [184.719837] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in port_clock (expected 270000, found 0) <7> [184.719946] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll.isra.0 [i915]] [CRTC:80:pipe A] releasing DPLL 0 <7> [184.720093] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [184.720195] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [184.720321] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4060) -> ( 0 - 0), size 4060 -> 0 <7> [184.720420] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4060 - 4096) -> ( 0 - 0), size 36 -> 0 <7> [184.720520] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [184.720620] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 4, 6, 7, 10, 10, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [184.720717] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 65, 97, 113, 161, 161, 0, 0, 30, 49, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [184.720815] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 73, 108, 126, 179, 179, 0, 0, 31, 55, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [184.720917] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [184.721037] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 21855 required 0 <7> [184.721149] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33330 required 0 <7> [184.721261] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 34924 required 0 <7> [184.721368] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 34924 required 0 <7> [184.721474] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [184.721582] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 41600 required 0 <7> [184.721687] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [184.721806] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz <7> [184.721912] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [184.722033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset] <7> [184.722143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [184.722250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [184.722355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [184.722459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [184.722567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [184.722675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [184.726719] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [184.933338] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7> [184.934731] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [184.944666] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 turn panel power off <7> [184.945277] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 wait for panel power off time <7> [184.945862] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [184.999154] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [184.999761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [185.000438] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A] <7> [185.001096] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [185.001611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [185.002247] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [185.002746] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B] <7> [185.003259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:245:DDI TC1/PHY TC1] <7> [185.003616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST A] <7> [185.003976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST B] <7> [185.004385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST C] <7> [185.004445] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00020000, dig 0x000000a0, pins 0x00000020, long 0x00000020 <7> [185.004673] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI B/PHY B] - long <7> [185.004715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:250:DP-MST D] <7> [185.005058] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DDI TC2/PHY TC2] <7> [185.005085] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 5 - cnt: 10 <7> [185.005377] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC3/PHY TC3] <7> [185.005510] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI B/PHY B] <7> [185.005768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A] <7> [185.006201] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B] <7> [185.006488] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C] <7> [185.006761] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D] <7> [185.007045] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC4/PHY TC4] <7> [185.007311] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A] <7> [185.007577] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B] <7> [185.007838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C] <7> [185.008117] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D] <7> [185.008461] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7> [185.008745] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [185.009067] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [185.009354] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [185.009638] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [185.009921] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [185.010250] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [185.010537] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [185.010861] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [185.011254] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [185.011617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [185.011942] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [185.012317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.012605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.012876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.013502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.014210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.014507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.014956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.015525] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.015813] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.016127] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.016393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.016633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.016867] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.017126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.017672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.018092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.018297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.018663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.018883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.019117] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.019308] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.019490] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.019662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.019828] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.019997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.020472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.020701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.020847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.021170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.021341] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.021488] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.021631] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.021768] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.021891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.022031] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.022150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.022579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.022738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.022847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.023151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.023318] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.023448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.023574] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.023694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.023807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.023921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.024041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.024474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.024636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.024746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.025030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.025177] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.025305] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.025431] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.025554] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.025663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.025779] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.025887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.026322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.026487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.026597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.026873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.027024] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.027155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.027279] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.027399] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.027510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.027627] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.027736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.028170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.028344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.028474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.028749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.028890] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.029025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.029154] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.029277] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.029388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.029501] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.029607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.030041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.030217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.030327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.030609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.030748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.030874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.031008] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.031137] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.031247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.031361] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.031468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.031893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.032065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.032179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.032460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.032604] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.032731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.032854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.032976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.033128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.033243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.033349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.033773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.033938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.034086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.034362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.034506] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.034637] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.034759] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.034882] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.035008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.035126] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.035236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.035662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.035836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.035948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.036238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.036382] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.036508] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.036630] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.036752] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.036862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.036977] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.037100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.037542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.037706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.037816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.038102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.038248] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.038375] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.038496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.038620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.038732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.038849] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.038956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.039408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.039570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.039680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.039956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.040107] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.040239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.040361] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.040481] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.040594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.040711] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.040819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.041255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.041417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.041527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.041802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.041940] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.042082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.042208] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.042330] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.042438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.042565] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.042673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.043107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.043277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.043385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.043661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.043804] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.043928] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.044067] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.044190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.044299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.044413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.044521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.044948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.045136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.045246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.045522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.045663] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.045788] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.045914] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.046049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.046159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.046274] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.046386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.046825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.047002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.047119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.047396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.047539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.047667] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.047791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.047912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.048045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.048163] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.048271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.048695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.048871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.048992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.049300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.049440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.049567] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.049692] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.049812] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.049924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.050055] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.050167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.050594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.050761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.050866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.051149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.051314] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.051444] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.051569] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.051691] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.051806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.051921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.052045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.052475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.052652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.052763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.053048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.053191] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.053318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.053443] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.053564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.053678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.053792] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.053901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.054340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.054503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.054612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.054886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.055037] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.055166] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.055290] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.055408] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.055519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.055635] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.055744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.056198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.056378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.056491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.056765] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.056907] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.057047] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.057173] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.057295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.057408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.057526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.057636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.058069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.058234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.058347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.058626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.058767] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.058894] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.059030] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.059159] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.059270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.059383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.059491] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.059915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.060094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.060204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.060480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.060618] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.060745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.060871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.061019] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.061130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.061241] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.061349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.061773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.061933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.062056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.062334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.062473] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.062600] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.062724] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.062848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.062958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.063089] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.063199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.063620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.063776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.063885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.064170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.064314] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.064440] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.064565] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.064686] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.064804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.064927] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.065048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.065478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.065638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.065747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.066032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.066172] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.066297] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.066421] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.066542] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.066654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.066768] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.066874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.067324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.067486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.067596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.067867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.068014] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.068142] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.068266] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.068385] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.068499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.068615] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.068724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.069157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.069331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.069442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.069716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.069855] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.069992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.070123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.070248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.070362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.070489] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.070598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.071045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.071210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.071318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.071593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.071731] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.071859] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.071989] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.072115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.072226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.072343] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.072451] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.072874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.073045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.073154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.073430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.073570] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.073694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.073821] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.073943] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.074067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.074181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.074307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.074730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.074893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.075014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.075294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.075434] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.075561] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.075686] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.075807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.075917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.076046] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.076156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.076580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.076738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.076852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.077135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.077279] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.077406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.077533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.077655] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.077764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.077880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.078018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.078447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.078604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.078707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.078989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.079147] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.079276] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.079399] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.079519] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.079631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.079744] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.079852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.080289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.080447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.080553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.080828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.080964] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.081106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.081229] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.081352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.081462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.081575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.081682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.082112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.082267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.082379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.082656] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.082797] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.082924] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.083061] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.083186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.083296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.083411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.083521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.083944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.084129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.084240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.084516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.084656] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.084785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.084908] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.085047] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.085163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.085276] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.085384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.085810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.085984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.086098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.086376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.086518] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.086644] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.086770] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.086892] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.087006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.087121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.087230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.087654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.087817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.087925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.088209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.088368] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.088500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.088625] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.088747] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.088861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.088976] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.089121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.089548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.089737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.089848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.090133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.090274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.090400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.090525] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.090647] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.090765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.090879] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.090996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.091423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.091605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.091713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.091996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.092140] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.092267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.092388] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.092508] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.092623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.092739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.092844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.093276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.093489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.093598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.093874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.094025] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.094154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.094278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.094402] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.094518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.094631] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.094739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.095172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.095353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.095465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.095740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.095878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.096012] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.096136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.096259] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.096373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.096486] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.096594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.097027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.097209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.097367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.097642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.097782] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.097907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.098041] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.098165] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.098278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.098391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.098499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.098924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.099067] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [185.099145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.099256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.099533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.099677] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.099802] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.099926] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.100075] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.100190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.100308] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.100415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.100842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.101027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.101138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.101413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.101555] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.101684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.101808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.101933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.102084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.102198] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.102304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.102732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.102903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.103029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.103308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.103446] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.103572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.103696] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.103816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.103924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.104052] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.104163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.104589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.104752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.104859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.105146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.105291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.105418] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.105540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.105662] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.105771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.105881] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.106001] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.106425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.106604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.106716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.106997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.107144] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.107272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.107398] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.107519] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.107628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.107741] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.107848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.108277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.108438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.108549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.108833] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.108971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.109118] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.109242] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.109370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.109481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.109595] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.109704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.110139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.110300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.110406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.110683] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.110821] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.110949] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.111102] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.111227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.111348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.111468] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.111574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.112005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.112167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.112280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.112556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.112696] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.112824] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.112947] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.113081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.113194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.113309] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.113417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.113842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.114011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.114119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.114394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.114537] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.114661] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.114787] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.114909] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.115031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.115147] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.115253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.115679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.115841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.115953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.116243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.116401] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.116529] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.116654] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.116777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.116889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.117014] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.117123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.117552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.117711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.117819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.118101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.118245] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.118370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.118496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.118618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.118729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.118844] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.118950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.119384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.119556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.119665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.119944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.120104] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.120246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.120372] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.120492] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.120603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.120718] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.120825] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.121256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.121427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.121533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.121810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.121948] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.122108] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.122233] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.122355] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.122467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.122582] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.122690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.123120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.123280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.123390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.123665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.123807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.123933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.124067] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.124191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.124302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.124414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.124519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.124943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.125115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.125224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.125515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.125653] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.125782] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.125906] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.126040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.126149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.126266] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.126375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.126803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.126961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.127083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.127362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.127503] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.127630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.127755] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.127878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.127995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.128109] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.128218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.128644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.128803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.128913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.129200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.129340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.129470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.129593] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.129715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.129828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.129939] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.130063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.130489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.130645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.130754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.131043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.131185] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.131311] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.131437] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.131559] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.131668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.131782] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.131889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.132325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.132483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.132598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.132878] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.133033] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.133158] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.133279] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.133405] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.133519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.133638] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.133746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.134203] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.134363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.134474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.134765] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.134904] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.135051] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.135176] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.135299] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.135413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.135528] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.135636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.136068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.136244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.136352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.136626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.136766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.136894] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.137027] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.137151] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.137264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.137379] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.137490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.137914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.138082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.138192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.138469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.138610] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.138750] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.138876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.139009] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.139119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.139232] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.139343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.139768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.139927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.140045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.140322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.140467] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.140594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.140716] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.140837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.140951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.141075] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.141180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.141604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.141759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.141865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.142144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.142284] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.142413] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.142536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.142658] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.142769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.142880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.142998] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.143420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.143586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.143706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.143991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.144140] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.144267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.144394] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.144515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.144623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.144736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.144843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.145293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.145458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.145568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.145852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.146001] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.146127] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.146251] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.146378] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.146486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.146598] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.146707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.147137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.147295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.147407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.147684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.147837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.147966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.148112] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.148237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.148347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.148461] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.148569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.148999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.149164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.149272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.149548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.149685] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.149812] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.149934] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.150068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.150175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.150289] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.150397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.150822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.150984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.151098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.151373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.151513] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.151645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.151769] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.151891] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.152015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.152128] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.152254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.152680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.152854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.152963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.153258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.153399] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.153527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.153649] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.153772] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.153883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.154008] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.154120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.154545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.154705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.154818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.155104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.155243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.155369] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.155494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.155616] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.155725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.155840] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.155949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.156405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.156566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.156674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.156949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.157103] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.157248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.157374] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.157495] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.157608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.157721] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.157830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.158261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.158423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.158533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.158806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.158947] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.159085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.159208] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.159328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.159439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.159555] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.159664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.160093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.160253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.160362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.160643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.160786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.160912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.161048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.161175] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.161284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.161396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.161520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.161948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.162125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.162235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.162515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.162655] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.162785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.162911] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.163046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.163156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.163269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.163376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.163803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.163958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.164083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.164359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.164496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.164620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.164744] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.164867] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.164978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.165107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.165216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.165639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.165796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.165904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.166206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.166349] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.166486] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.166611] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.166733] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.166841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.166954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.167094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.167520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.167679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.167789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.168073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.168215] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.168343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.168467] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.168587] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.168697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.168811] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.168919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.169358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.169519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.169630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.169908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.170067] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.170196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.170323] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.170447] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.170557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.170673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.170796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.171226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.171390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.171499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.171777] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.171918] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.172063] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.172187] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.172307] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.172420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.172536] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.172645] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.173074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.173253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.173363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.173639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.173781] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.173908] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.174043] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.174168] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.174285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.174399] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.174505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.174930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.175121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.175233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.175507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.175649] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.175774] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.175897] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.176051] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.176169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.176284] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.176393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.176817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.177006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.177122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.177400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.177539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.177666] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.177791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.177914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.178060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.178176] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.178284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.178705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.178880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.178996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.179278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.179420] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.179545] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.179665] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.179787] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.179900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.180032] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.180141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.180563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.180781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.180909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.181201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.181343] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.181470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.181592] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.181715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.181825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.181937] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.182061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.182492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.182623] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [185.182689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.182798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.183085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.183226] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.183355] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.183481] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.183603] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.183718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.183832] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.183941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.184379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.184552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.184661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.184934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.185105] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.185235] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.185361] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.185481] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.185593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.185708] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.185815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.186247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.186421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.186532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.186809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.186951] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.187092] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.187215] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.187337] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.187445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.187558] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.187665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.188095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.188257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.188365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.188640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.188777] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.188901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.189062] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.189187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.189300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.189413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.189532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.189958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.190143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.190253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.190530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.190670] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.190795] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.190918] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.191050] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.191159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.191276] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.191385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.191816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.191975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.192100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.192383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.192527] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.192654] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.192778] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.192902] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.193028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.193142] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.193249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.193673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.193828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.193950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.194241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.194381] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.194509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.194632] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.194751] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.194860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.194973] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.195105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.195530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.195691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.195798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.196078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.196221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.196348] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.196471] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.196592] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.196702] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.196816] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.196922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.197353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.197505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.197614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.197888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.198042] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.198174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.198298] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.198434] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.198547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.198663] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.198770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.199201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.199362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.199470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.199742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.199880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.200031] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.200154] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.200278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.200389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.200503] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.200611] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.201042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.201202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.201310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.201582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.201722] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.201848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.201970] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.202112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.202222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.202334] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.202439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.202863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.203067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.203177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.203458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.203596] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.203722] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.203846] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.203968] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.204097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.204213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.204320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.204743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.204905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.205026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.205304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.205445] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.205573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.205697] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.205821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.205931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.206061] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.206168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.206590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.206748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.206856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.207143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.207290] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.207417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.207540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.207663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.207775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.207893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.208010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.208435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.208619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.208726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.209010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.209149] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.209278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.209403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.209524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.209634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.209749] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.209856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.210291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.210455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.210564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.210843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.211015] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.211145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.211274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.211397] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.211506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.211621] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.211736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.212165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.212326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.212434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.212709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.212867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.213008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.213134] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.213259] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.213370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.213483] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.213591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.214023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.214184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.214293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.214571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.214711] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.214838] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.214963] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.215106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.215216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.215333] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.215443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.215869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.216039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.216146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.216422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.216563] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.216690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.216813] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.216950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.217077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.217193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.217304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.217729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.217889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.218011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.218287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.218426] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.218555] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.218679] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.218803] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.218913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.219046] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.219157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.219582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.219752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.219861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.220153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.220299] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.220423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.220547] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.220674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.220783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.220894] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.221007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.221432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.221610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.221721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.222022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.222165] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.222292] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.222418] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.222539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.222652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.222770] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.222879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.223309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.223470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.223579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.223857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.224011] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.224136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.224261] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.224381] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.224489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.224607] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.224715] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.225148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.225312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.225421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.225695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.225838] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.225963] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.226108] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.226248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.226359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.226471] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.226578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.227013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.227181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.227290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.227566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.227710] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.227836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.227960] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.228104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.228214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.228327] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.228435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.228858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.229041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.229154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.229432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.229571] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.229698] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.229821] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.229942] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.230078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.230193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.230300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.230724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.230883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.231004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.231288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.231446] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.231575] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.231698] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.231818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.231929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.232052] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.232160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.232585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.232744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.232854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.233150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.233292] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.233417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.233541] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.233662] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.233772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.233887] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.234001] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.234424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.234582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.234688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.234961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.235120] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.235247] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.235371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.235493] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.235601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.235715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.235822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.236252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.236439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.236550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.236827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.236964] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.237113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.237239] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.237361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.237473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.237587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.237695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.238126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.238294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.238407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.238683] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.238827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.238955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.239096] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.239225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.239340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.239456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.239565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.240004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.240180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.240295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.240572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.240719] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.240848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.240970] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.241113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.241224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.241341] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.241454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.241880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.242052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.242164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.242441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.242582] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.242709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.242831] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.242950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.243075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.243189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.243295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.243719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.243879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.243993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.244271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.244411] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.244537] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.244659] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.244777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.244888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.245025] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.245133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.245559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.245738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.245845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.246129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.246274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.246401] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.246525] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.246646] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.246755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.246869] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.246976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.247417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.247578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.247686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.247965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.248125] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.248249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.248371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.248494] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.248604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.248715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.248822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.249250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.249507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.249669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.249953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.250115] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.250240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.250364] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.250491] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.250604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.250718] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.250826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.251256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.251623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.251801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.252143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.252354] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.252484] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.252612] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.252737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.252850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.252962] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.253102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.253597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.253882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.254051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.254376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.255034] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.255169] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.255301] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.255424] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.255537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.255655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.255762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.256230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.256408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.256541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.256832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.256976] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.257124] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.257247] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.257369] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.257483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.257597] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.257706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.258139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.258331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.258440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.258716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.258857] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.258992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.259116] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.259241] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.259358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.259469] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.259576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.260011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.260192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.260302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.260579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.260717] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.260846] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.260970] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.261110] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.261225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.261341] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.261448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.261877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.262100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.262214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.262490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.262627] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.262753] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.262876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.263006] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.263121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.263238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.263347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.263773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.263945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.264063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.264343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.264485] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.264615] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.264741] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.264861] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.264976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.265110] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.265218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.265644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.265821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.265970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.266262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.266407] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.266534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.266654] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.266777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.266890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.267027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.267138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.267564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.267693] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [185.267766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.267874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.268162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.268303] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.268430] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.268555] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.268674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.268786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.268901] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.269022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.269448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.269619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.269728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.270014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.270160] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.270288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.270413] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.270534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.270641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.270758] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.270867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.271299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.271473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.271588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.271864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.272016] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.272147] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.272273] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.272393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.272505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.272622] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.272731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.273166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.273333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.273444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.273719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.273862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.274002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.274134] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.274254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.274366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.274480] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.274588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.275022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.275189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.275303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.275580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.275723] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.275850] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.275972] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.276111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.276220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.276335] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.276444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.276870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.277042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.277154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.277431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.277574] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.277702] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.277823] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.277945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.278089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.278204] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.278312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.278735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.278896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.279015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.279290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.279431] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.279558] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.279681] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.279806] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.279915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.280044] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.280155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.280579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.280737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.280845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.281129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.281274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.281404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.281530] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.281653] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.281762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.281874] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.281992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.282428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.282588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.282695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.282971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.283125] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.283252] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.283374] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.283495] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.283604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.283719] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.283825] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.284255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.284414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.284522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.284801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.284941] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.285082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.285207] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.285328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.285438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.285553] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.285661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.286095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.286256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.286363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.286637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.286776] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.286903] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.287038] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.287161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.287271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.287386] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.287497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.287923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.288106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.288216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.288492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.288631] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.288759] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.288883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.289030] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.289142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.289255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.289364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.289788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.289948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.290071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.290352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.290493] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.290624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.290749] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.290871] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.290994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.291113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.291224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.291652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.291809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.291918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.292201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.292342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.292472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.292599] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.292724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.292837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.292950] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.293073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.293498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.293661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.293769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.294067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.294212] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.294337] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.294463] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.294587] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.294700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.294818] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.294929] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.295366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.295521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.295635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.295909] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.296061] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.296186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.296310] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.296434] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.296543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.296657] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.296764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.297193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.297351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.297465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.297741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.297882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.298021] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.298146] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.298269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.298381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.298492] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.298598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.299030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.299188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.299298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.299571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.299712] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.299839] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.299963] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.300121] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.300233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.300350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.300462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.300887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.301053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.301165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.301440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.301581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.301712] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.301837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.301959] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.302088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.302202] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.302309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.302734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.302893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.303012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.303289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.303429] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.303554] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.303679] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.303802] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.303911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.304033] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.304141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.304562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.304732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.304841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.305119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.305261] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.305388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.305514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.305638] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.305749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.305863] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.305972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.306411] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.306573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.306687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.306966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.307121] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.307248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.307372] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.307498] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.307610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.307722] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.307829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.308258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.308423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.308533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.308810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.308953] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.309092] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.309217] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.309340] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.309451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.309564] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.309671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.310105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.310266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.310371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.310646] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.310786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.310913] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.311068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.311189] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.311300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.311416] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.311524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.311948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.312117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.312227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.312509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.312651] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.312779] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.312901] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.313040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.313153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.313269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.313375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.313799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.313953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.314076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.314356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.314494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.314622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.314745] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.314864] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.314971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.315099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.315208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.315633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.315789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.315897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.316183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.316326] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.316456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.316582] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.316704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.316812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.316923] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.317041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.317468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.317628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.317738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.318021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.318168] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.318296] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.318420] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.318541] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.318652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.318765] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.318872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.319310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.319471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.319582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.319860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.320010] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.320138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.320261] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.320383] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.320495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.320609] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.320717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.321152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.321323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.321432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.321710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.321850] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.321973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.322130] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.322255] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.322365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.322478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.322586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.323020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.323189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.323300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.323576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.323712] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.323837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.323960] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.324098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.324207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.324320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.324429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.324854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.325040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.325151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.325427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.325570] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.325699] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.325822] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.325945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.326090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.326206] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.326315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.326738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.326904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.327029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.327309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.327452] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.327580] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.327703] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.327820] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.327927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.328059] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.328170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.328594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.328752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.328861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.329144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.329292] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.329419] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.329545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.329668] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.329780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.329893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.330008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.330432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.330588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.330700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.330975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.331127] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.331256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.331379] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.331503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.331614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.331731] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.331843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.332272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.332435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.332541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.332818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.332957] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.333113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.333242] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.333366] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.333477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.333592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.333700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.334127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.334289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.334395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.334671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.334809] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.334935] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.335073] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.335195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.335309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.335422] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.335532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.335960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.336140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.336247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.336524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.336661] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.336790] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.336914] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.337051] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.337161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.337276] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.337383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.337809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.337967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.338094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.338375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.338519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.338646] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.338768] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.338886] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.339007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.339124] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.339236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.339662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.339824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.339932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.340219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.340359] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.340485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.340608] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.340728] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.340835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.340949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.341072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.341495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.341663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.341774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.342056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.342204] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.342330] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.342455] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.342577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.342688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.342805] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.342915] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.343355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.343514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.343628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.343906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.344081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.344209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.344334] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.344456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.344568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.344684] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.344792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.345224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.345389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.345499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.345773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.345912] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.346056] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.346181] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.346300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.346407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.346520] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.346629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.347059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.347222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.347330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.347605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.347745] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.347873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.348009] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.348130] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.348237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.348352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.348462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.348884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.349052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.349161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.349438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.349579] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.349704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.349829] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.349950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.350075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.350191] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.350297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.350723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.350883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.351003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.351283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.351422] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.351548] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.351671] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.351791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.351899] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.352028] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.352135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.352560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.352714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.352820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.353106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.353249] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.353376] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.353496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.353619] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.353731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.353845] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.353952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.354394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.354556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.354666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.354941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.355112] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.355242] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.355365] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.355491] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.355603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.355715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.355821] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.356252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.356413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.356521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.356796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.356935] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.357084] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.357211] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.357333] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.357444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.357559] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.357666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.358108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.358271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.358382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.358658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.358795] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.358923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.359067] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.359190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.359299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.359414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.359523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.359949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.360127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.360236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.360513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.360653] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.360780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.360904] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.361041] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.361154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.361269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.361375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.361799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.361959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.362087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.362371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.362508] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.362634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.362759] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.362879] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.362996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.363108] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.363215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.363639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.363797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.363904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.364196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.364338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.364465] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.364588] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.364707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.364815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.364931] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.365050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.365474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.365631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.365740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.366046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.366186] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.366313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.366437] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.366562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.366673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.366786] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.366892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.367329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.367676] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 0 to 2 or reprobing <7> [185.367683] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [185.367700] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:258:HDMI-A-1] <7> [185.367937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.419131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [185.437702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [185.437736] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.437857] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [185.456865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [185.456872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [185.456968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.457106] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] status updated from disconnected to connected <7> [185.457501] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] probed modes : <7> [185.457515] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [185.457521] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [185.457524] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [185.457529] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [185.457531] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [185.457573] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [185.457586] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:258:HDMI-A-1] <7> [185.457788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.508124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [185.526700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [185.526712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.526836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [185.545819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [185.545826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [185.545921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.546094] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] probed modes : <7> [185.546107] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [185.546111] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [185.546114] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [185.546117] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [185.546120] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [185.546284] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 2 to 1 or reprobing <7> [185.546290] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [185.546305] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:258:HDMI-A-1] <7> [185.546417] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] status updated from connected to disconnected <7> [185.546571] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [185.546670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [185.546681] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:258:HDMI-A-1] <7> [185.546781] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [185.546879] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 1 to 0 or reprobing <7> [185.546884] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [185.546894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [185.547017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.598128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [185.616703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [185.616707] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.616805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [185.635851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [185.635855] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [185.635954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.636103] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [185.636156] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [185.636171] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [185.636296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.687136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [185.705685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [185.705689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.705789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [185.724865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [185.724868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [185.724967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.725111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <6> [185.725388] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS <7> [185.725478] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [185.725902] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing <7> [185.725907] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7> [185.725919] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [185.726138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.726262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.726591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.726746] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.726876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [185.727013] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [185.727145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [185.727254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [185.727519] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 turning VDD on <7> [185.727652] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 wait for panel power cycle <7> [185.727877] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [185.728007] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [185.728218] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [185.728333] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 panel power wasn't enabled <7> [185.798574] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00020000, dig 0x000000a0, pins 0x00000020, long 0x00000020 <7> [185.798654] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI B/PHY B] - long <7> [185.798783] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 5 - cnt: 20 <7> [185.798919] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI B/PHY B] <7> [185.933850] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00 <7> [185.933965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [185.934676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes <7> [185.934775] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [185.934873] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [185.934970] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [185.935113] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [185.935118] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [185.935122] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [185.935126] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [185.935159] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [185.935265] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [185.936118] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [185.936217] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [185.936951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7> [185.936962] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa <7> [185.936966] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa <7> [185.937008] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7> [185.937021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [185.937885] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00 <7> [185.937994] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [185.938655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes <7> [185.938753] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [185.938848] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [185.938940] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [185.939058] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [185.939062] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [185.939064] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [185.939067] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [185.939077] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [185.939172] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [185.940013] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [185.940108] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [185.940814] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7> [185.940825] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa <7> [185.940828] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa <7> [185.940922] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:eDP-1] EDID override reset <7> [185.940948] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7> [185.940961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [185.941825] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00 <7> [185.941923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [185.942596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes <7> [185.942688] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [185.942785] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [185.942878] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [185.942988] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [185.942992] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [185.942994] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [185.942997] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [185.943007] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [185.943097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [185.943926] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [185.944047] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [185.944750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7> [185.944761] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa <7> [185.944765] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa <7> [185.944851] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:246:DP-1] EDID override reset <7> [185.944867] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] <7> [185.944880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1] <7> [185.945046] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected <7> [185.945147] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [185.945151] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [185.945162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [185.956132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out after NAK <7> [185.956299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [185.967127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out after NAK <7> [185.967297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [186.019128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [186.035285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.035290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.035395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [186.051280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.051284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [186.051388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [186.051445] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [186.051461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [186.102129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [186.118292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.118296] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.118394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [186.134332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.134336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [186.134441] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [186.134552] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:258:HDMI-A-1] EDID override reset <7> [186.134567] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [186.134577] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [186.185136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [186.201311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.201315] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.201414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [186.217342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.217345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [186.217447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [186.217575] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:264:DP-2] EDID override reset <7> [186.217594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] <7> [186.217609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2] <7> [186.217786] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] disconnected <7> [186.217859] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:DP-3] EDID override reset <7> [186.217870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] <7> [186.217880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3] <7> [186.218038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] disconnected <6> [186.218387] [IGT] kms_force_connector_basic: exiting, ret=0 <7> [186.218563] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [186.218567] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [186.218579] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [186.269192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [186.286368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.286372] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.286478] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [186.303303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.303307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [186.303408] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [186.303472] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing <7> [186.303478] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7> [186.303493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [186.304395] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00 <7> [186.304497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [186.305176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes <7> [186.305271] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [186.305368] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [186.305462] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [186.305567] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [186.305571] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [186.305574] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [186.305577] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [186.305590] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [186.305680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [186.306512] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [186.306613] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [186.307347] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7> [186.307359] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa <7> [186.307363] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa <7> [186.307527] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [186.307880] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [186.308019] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 138780KHz <7> [186.308120] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 2 clock 270000 bpp 24 <7> [186.308214] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 416340 available 540000 <7> [186.308309] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7> [186.308410] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [186.308520] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI B/PHY B] [CRTC:80:pipe A] <7> [186.308616] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.enable (expected 0, found 1) <7> [186.308726] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.active (expected 0, found 1) <7> [186.308837] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in cpu_transcoder (expected -1, found 0) <7> [186.308945] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in lane_count (expected 0, found 2) <7> [186.309078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in output_types (expected 0x00000000, found 0x00000100) <7> [186.309187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in framestart_delay (expected 0, found 1) <7> [186.309299] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [186.309408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [186.309516] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [186.309625] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [186.309734] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [186.309844] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [186.309954] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [186.310085] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vtotal (expected 0, found 1112) <7> [186.310196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [186.310303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vblank_end (expected 0, found 1112) <7> [186.310413] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [186.310522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [186.310629] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [186.310733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [186.310843] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [186.310952] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [186.311072] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [186.311181] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [186.311289] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [186.311396] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vtotal (expected 0, found 1112) <7> [186.311501] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [186.311607] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1112) <7> [186.311717] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [186.311826] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [186.311934] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in pixel_multiplier (expected 0, found 1) <7> [186.312063] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [186.312178] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [186.312288] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in pipe_bpp (expected 0, found 24) <7> [186.312397] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in port_clock (expected 0, found 270000) <7> [186.312532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [186.312635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [186.312748] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4060), size 0 -> 4060 <7> [186.312850] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4060 - 4096), size 0 -> 36 <7> [186.312953] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [186.313073] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 4, 6, 7, 10, 10, 0, 0, 0, 3, 0 <7> [186.313171] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 65, 97, 113, 161, 161, 0, 0, 30, 49, 63 <7> [186.313271] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 73, 108, 126, 179, 179, 0, 0, 31, 55, 64 <7> [186.313374] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 555120 num active planes 1 <7> [186.313487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 21855 required 583 <7> [186.313602] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33330 required 583 <7> [186.313710] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 34924 required 583 <7> [186.313816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 34924 required 583 <7> [186.313923] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 583 <7> [186.314052] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 41600 required 583 <7> [186.314163] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 583 <7> [186.314282] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (69390 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz) <7> [186.314395] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (10843 kHz) > old min cdclk (0 kHz) <7> [186.314511] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz <7> [186.314626] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [186.314739] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0 <7> [186.314848] i915 0000:00:02.0: [drm:intel_reference_shared_dpll.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0 <7> [186.314957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7> [186.315088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB <7> [186.315202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [186.315310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [186.315418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [186.315524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [186.315628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [186.315736] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 2; data_m: 6467616, data_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 <7> [186.315847] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 2; data_m: 5174839, data_n: 8388608, link_m: 215618, link_n: 524288, tu: 64 <7> [186.315956] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [186.316130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [186.316255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7> [186.316362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa <7> [186.316473] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa <7> [186.316584] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=138780, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1112 vs=1083-1088 vt=1112, flags=0xa <7> [186.316693] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa <7> [186.316802] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=138780, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1112 vs=1083-1088 vt=1112, flags=0xa <7> [186.316911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 138780 <7> [186.317033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 120, ips linetime: 0 <7> [186.317142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [186.317251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [186.317361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 1 <7> [186.317471] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x88, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [186.317579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [186.317688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [186.317796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:282] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [186.317912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [186.318035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [186.318150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [186.318259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [186.318367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [186.318474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [186.318584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [186.318804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [186.318940] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B] <7> [186.319061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:245:DDI TC1/PHY TC1] <7> [186.319164] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST A] <7> [186.319269] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST B] <7> [186.319375] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST C] <7> [186.319482] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:250:DP-MST D] <7> [186.319587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DDI TC2/PHY TC2] <7> [186.319692] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC3/PHY TC3] <7> [186.319799] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A] <7> [186.319905] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B] <7> [186.320020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C] <7> [186.320128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D] <7> [186.320229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC4/PHY TC4] <7> [186.320329] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A] <7> [186.320429] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B] <7> [186.320528] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C] <7> [186.320627] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D] <7> [186.320730] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [186.320847] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [186.320956] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [186.321086] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [186.321200] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [186.321308] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [186.321419] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [186.321544] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [186.321731] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A] <7> [186.321843] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [186.322013] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 turn panel power on <7> [186.322135] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 wait for panel power cycle <7> [186.322337] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [186.322454] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [186.322608] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 wait for panel power on <7> [186.322801] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [186.533277] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [186.533880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [186.536483] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 0a 82 41 00 00 01 c0 02 00 00 00 0f 09 00 <7> [186.536566] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [ENCODER:235:DDI B/PHY B] Using LINK_BW_SET value 0a <7> [186.537854] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 2, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [186.538398] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS1 <7> [186.540111] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [ENCODER:235:DDI B/PHY B][DPRX] Clock recovery OK <7> [186.540391] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS2 <7> [186.542666] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [ENCODER:235:DDI B/PHY B][DPRX] Channel EQ done. DP Training successful <7> [186.542848] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI B/PHY B][DPRX] Link Training passed at link rate = 270000, lane count = 2 <7> [186.543548] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [186.543796] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [186.543946] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [186.544165] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 96000 <7> [186.544501] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [186.544662] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [186.560766] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [186.561763] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7> [186.562382] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [186.563393] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI B/PHY B] Fec status: 0 <7> [186.563821] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [186.564925] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7> [186.565007] [drm:drm_client_modeset_probe] <7> [186.565617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7> [186.565689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7> [186.567338] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00 <7> [186.567618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [186.568631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes <7> [186.568901] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [186.569207] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [186.569470] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [186.569960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [186.569972] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [186.570005] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7> [186.570021] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7> [186.570078] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7> [186.570287] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [186.571305] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [186.571483] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [186.572630] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7> [186.572674] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa <7> [186.572687] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa <7> [186.572697] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] <7> [186.572728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1] <7> [186.573323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected <7> [186.573358] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] <7> [186.573395] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1] <7> [186.625198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10 <7> [186.642351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.642356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.642479] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [186.659303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [186.659307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [186.659406] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected <7> [186.659419] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] <7> [186.659429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2] <7> [186.659571] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] disconnected <7> [186.659582] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] <7> [186.659592] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3] <7> [186.659728] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] disconnected <7> [186.659738] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7> [186.659741] [drm:drm_client_modeset_probe] connector 246 enabled? no <7> [186.659743] [drm:drm_client_modeset_probe] connector 258 enabled? no <7> [186.659745] [drm:drm_client_modeset_probe] connector 264 enabled? no <7> [186.659746] [drm:drm_client_modeset_probe] connector 273 enabled? no <7> [186.659835] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [186.659850] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7> [186.659853] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7> [186.659855] [drm:drm_client_modeset_probe] found mode 1920x1080 <7> [186.659857] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1080 config <7> [186.659889] [drm:drm_client_modeset_probe] desired mode 1920x1080 set on crtc 80 (0,0) <6> [186.694641] Console: switching to colour frame buffer device 240x67

<7> [184.198633] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [184.199696] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [184.199730] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [184.199766] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [184.251222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [184.268320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.268328] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [184.268464] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [184.285352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.285356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [184.285562] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [184.285619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [184.285636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [184.337192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [184.354317] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.354322] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [184.354434] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [184.371340] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.371344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [184.371440] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [184.371504] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [184.371519] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [184.422190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [184.439307] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.439311] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [184.439417] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [184.456318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.456322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [184.456422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<6> [184.456618] [IGT] kms_force_connector_basic: starting subtest force-connector-state

<7> [184.462606] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1]

<7> [184.462621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1]

<7> [184.462785] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected

<7> [184.463185] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [184.463196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [184.514188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [184.531334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.531338] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [184.531446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [184.548330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.548333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [184.548433] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [184.548876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2]

<7> [184.548888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]

<7> [184.549042] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] disconnected

<7> [184.549419] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3]

<7> [184.549430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]

<7> [184.549572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] disconnected

<7> [184.550063] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1]

<7> [184.550074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [184.550887] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00

<7> [184.550996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [184.551607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes

<7> [184.551702] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [184.551796] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [184.551886] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [184.552003] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [184.552008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [184.552011] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [184.552013] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [184.552027] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [184.552127] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [184.552908] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [184.553015] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [184.553693] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes :

<7> [184.553707] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa

<7> [184.553712] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa

<7> [184.553730] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1]

<7> [184.553741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1]

<7> [184.553893] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected

<7> [184.553913] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [184.553923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [184.605196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [184.622325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.622331] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [184.622463] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [184.639299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [184.639303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [184.639409] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [184.639442] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2]

<7> [184.639457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]

<7> [184.639641] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] disconnected

<7> [184.639661] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3]

<7> [184.639671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]

<7> [184.639809] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] disconnected

<7> [184.711159] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.enable (expected 1, found 0)

<7> [184.711832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.active (expected 1, found 0)

<7> [184.712436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in cpu_transcoder (expected 0, found -1)

<7> [184.712941] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in lane_count (expected 2, found 0)

<7> [184.713486] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in dp_m_n (expected tu 64 data 6467616/8388608 link 269484/524288, found tu 0, data 0/0 link 0/0)

<7> [184.713932] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in output_types (expected 0x00000100, found 0x00000000)

<7> [184.714393] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in framestart_delay (expected 1, found 0)

<7> [184.714809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [184.715208] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [184.715591] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [184.715949] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [184.716319] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [184.716655] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [184.716999] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [184.717296] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vtotal (expected 1112, found 0)

<7> [184.717408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [184.717519] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vblank_end (expected 1112, found 0)

<7> [184.717627] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [184.717735] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [184.717845] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [184.717953] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [184.718075] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [184.718185] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [184.718298] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [184.718408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [184.718518] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [184.718630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vtotal (expected 1112, found 0)

<7> [184.718740] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [184.718849] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vblank_end (expected 1112, found 0)

<7> [184.718961] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [184.719083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [184.719192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in pixel_multiplier (expected 1, found 0)

<7> [184.719298] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [184.719406] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [184.719512] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in pipe_bpp (expected 24, found 0)

<7> [184.719621] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_clock (expected 138780, found 0)

<7> [184.719730] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_clock (expected 138780, found 0)

<7> [184.719837] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in port_clock (expected 270000, found 0)

<7> [184.719946] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll.isra.0 [i915]] [CRTC:80:pipe A] releasing DPLL 0

<7> [184.720093] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [184.720195] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [184.720321] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4060) -> ( 0 - 0), size 4060 -> 0

<7> [184.720420] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4060 - 4096) -> ( 0 - 0), size 36 -> 0

<7> [184.720520] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [184.720620] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 4, 6, 7, 10, 10, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [184.720717] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 65, 97, 113, 161, 161, 0, 0, 30, 49, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [184.720815] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 73, 108, 126, 179, 179, 0, 0, 31, 55, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [184.720917] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [184.721037] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 21855 required 0

<7> [184.721149] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33330 required 0

<7> [184.721261] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 34924 required 0

<7> [184.721368] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 34924 required 0

<7> [184.721474] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [184.721582] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 41600 required 0

<7> [184.721687] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [184.721806] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz

<7> [184.721912] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [184.722033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset]

<7> [184.722143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [184.722250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [184.722355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [184.722459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [184.722567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [184.722675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [184.726719] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [184.933338] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0

<7> [184.934731] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [184.944666] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 turn panel power off

<7> [184.945277] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 wait for panel power off time

<7> [184.945862] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [184.999154] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [184.999761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [185.000438] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A]

<7> [185.001096] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [185.001611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [185.002247] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [185.002746] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B]

<7> [185.003259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:245:DDI TC1/PHY TC1]

<7> [185.003616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST A]

<7> [185.003976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST B]

<7> [185.004385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST C]

<7> [185.004445] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00020000, dig 0x000000a0, pins 0x00000020, long 0x00000020

<7> [185.004673] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI B/PHY B] - long

<7> [185.004715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:250:DP-MST D]

<7> [185.005058] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DDI TC2/PHY TC2]

<7> [185.005085] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 5 - cnt: 10

<7> [185.005377] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC3/PHY TC3]

<7> [185.005510] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI B/PHY B]

<7> [185.005768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A]

<7> [185.006201] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B]

<7> [185.006488] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C]

<7> [185.006761] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D]

<7> [185.007045] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC4/PHY TC4]

<7> [185.007311] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A]

<7> [185.007577] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B]

<7> [185.007838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C]

<7> [185.008117] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D]

<7> [185.008461] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1]

<7> [185.008745] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [185.009067] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [185.009354] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [185.009638] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [185.009921] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [185.010250] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [185.010537] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [185.010861] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [185.011254] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [185.011617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [185.011942] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [185.012317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.012605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.012876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.013502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.014210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.014507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.014956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.015525] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.015813] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.016127] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.016393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.016633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.016867] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.017126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.017672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.018092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.018297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.018663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.018883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.019117] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.019308] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.019490] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.019662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.019828] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.019997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.020472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.020701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.020847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.021170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.021341] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.021488] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.021631] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.021768] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.021891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.022031] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.022150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.022579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.022738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.022847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.023151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.023318] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.023448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.023574] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.023694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.023807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.023921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.024041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.024474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.024636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.024746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.025030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.025177] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.025305] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.025431] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.025554] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.025663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.025779] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.025887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.026322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.026487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.026597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.026873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.027024] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.027155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.027279] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.027399] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.027510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.027627] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.027736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.028170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.028344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.028474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.028749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.028890] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.029025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.029154] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.029277] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.029388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.029501] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.029607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.030041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.030217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.030327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.030609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.030748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.030874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.031008] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.031137] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.031247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.031361] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.031468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.031893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.032065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.032179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.032460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.032604] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.032731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.032854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.032976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.033128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.033243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.033349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.033773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.033938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.034086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.034362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.034506] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.034637] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.034759] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.034882] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.035008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.035126] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.035236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.035662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.035836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.035948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.036238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.036382] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.036508] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.036630] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.036752] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.036862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.036977] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.037100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.037542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.037706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.037816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.038102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.038248] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.038375] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.038496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.038620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.038732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.038849] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.038956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.039408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.039570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.039680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.039956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.040107] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.040239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.040361] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.040481] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.040594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.040711] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.040819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.041255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.041417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.041527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.041802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.041940] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.042082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.042208] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.042330] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.042438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.042565] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.042673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.043107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.043277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.043385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.043661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.043804] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.043928] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.044067] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.044190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.044299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.044413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.044521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.044948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.045136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.045246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.045522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.045663] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.045788] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.045914] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.046049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.046159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.046274] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.046386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.046825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.047002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.047119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.047396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.047539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.047667] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.047791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.047912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.048045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.048163] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.048271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.048695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.048871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.048992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.049300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.049440] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.049567] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.049692] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.049812] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.049924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.050055] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.050167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.050594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.050761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.050866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.051149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.051314] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.051444] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.051569] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.051691] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.051806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.051921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.052045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.052475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.052652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.052763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.053048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.053191] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.053318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.053443] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.053564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.053678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.053792] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.053901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.054340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.054503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.054612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.054886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.055037] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.055166] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.055290] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.055408] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.055519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.055635] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.055744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.056198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.056378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.056491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.056765] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.056907] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.057047] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.057173] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.057295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.057408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.057526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.057636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.058069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.058234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.058347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.058626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.058767] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.058894] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.059030] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.059159] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.059270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.059383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.059491] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.059915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.060094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.060204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.060480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.060618] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.060745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.060871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.061019] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.061130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.061241] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.061349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.061773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.061933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.062056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.062334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.062473] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.062600] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.062724] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.062848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.062958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.063089] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.063199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.063620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.063776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.063885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.064170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.064314] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.064440] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.064565] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.064686] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.064804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.064927] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.065048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.065478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.065638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.065747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.066032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.066172] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.066297] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.066421] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.066542] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.066654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.066768] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.066874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.067324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.067486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.067596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.067867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.068014] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.068142] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.068266] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.068385] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.068499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.068615] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.068724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.069157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.069331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.069442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.069716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.069855] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.069992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.070123] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.070248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.070362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.070489] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.070598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.071045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.071210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.071318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.071593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.071731] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.071859] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.071989] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.072115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.072226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.072343] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.072451] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.072874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.073045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.073154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.073430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.073570] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.073694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.073821] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.073943] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.074067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.074181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.074307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.074730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.074893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.075014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.075294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.075434] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.075561] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.075686] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.075807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.075917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.076046] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.076156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.076580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.076738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.076852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.077135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.077279] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.077406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.077533] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.077655] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.077764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.077880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.078018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.078447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.078604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.078707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.078989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.079147] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.079276] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.079399] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.079519] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.079631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.079744] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.079852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.080289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.080447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.080553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.080828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.080964] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.081106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.081229] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.081352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.081462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.081575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.081682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.082112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.082267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.082379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.082656] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.082797] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.082924] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.083061] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.083186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.083296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.083411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.083521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.083944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.084129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.084240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.084516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.084656] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.084785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.084908] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.085047] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.085163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.085276] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.085384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.085810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.085984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.086098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.086376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.086518] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.086644] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.086770] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.086892] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.087006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.087121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.087230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.087654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.087817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.087925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.088209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.088368] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.088500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.088625] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.088747] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.088861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.088976] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.089121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.089548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.089737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.089848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.090133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.090274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.090400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.090525] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.090647] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.090765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.090879] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.090996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.091423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.091605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.091713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.091996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.092140] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.092267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.092388] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.092508] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.092623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.092739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.092844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.093276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.093489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.093598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.093874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.094025] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.094154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.094278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.094402] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.094518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.094631] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.094739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.095172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.095353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.095465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.095740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.095878] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.096012] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.096136] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.096259] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.096373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.096486] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.096594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.097027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.097209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.097367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.097642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.097782] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.097907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.098041] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.098165] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.098278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.098391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.098499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.098924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.099145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.099256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.099533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.099677] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.099802] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.099926] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.100075] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.100190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.100308] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.100415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.100842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.101027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.101138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.101413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.101555] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.101684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.101808] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.101933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.102084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.102198] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.102304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.102732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.102903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.103029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.103308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.103446] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.103572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.103696] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.103816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.103924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.104052] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.104163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.104589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.104752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.104859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.105146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.105291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.105418] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.105540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.105662] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.105771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.105881] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.106001] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.106425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.106604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.106716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.106997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.107144] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.107272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.107398] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.107519] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.107628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.107741] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.107848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.108277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.108438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.108549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.108833] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.108971] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.109118] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.109242] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.109370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.109481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.109595] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.109704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.110139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.110300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.110406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.110683] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.110821] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.110949] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.111102] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.111227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.111348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.111468] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.111574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.112005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.112167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.112280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.112556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.112696] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.112824] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.112947] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.113081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.113194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.113309] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.113417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.113842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.114011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.114119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.114394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.114537] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.114661] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.114787] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.114909] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.115031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.115147] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.115253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.115679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.115841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.115953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.116243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.116401] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.116529] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.116654] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.116777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.116889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.117014] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.117123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.117552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.117711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.117819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.118101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.118245] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.118370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.118496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.118618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.118729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.118844] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.118950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.119384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.119556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.119665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.119944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.120104] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.120246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.120372] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.120492] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.120603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.120718] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.120825] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.121256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.121427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.121533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.121810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.121948] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.122108] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.122233] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.122355] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.122467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.122582] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.122690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.123120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.123280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.123390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.123665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.123807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.123933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.124067] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.124191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.124302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.124414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.124519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.124943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.125115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.125224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.125515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.125653] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.125782] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.125906] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.126040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.126149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.126266] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.126375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.126803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.126961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.127083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.127362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.127503] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.127630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.127755] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.127878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.127995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.128109] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.128218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.128644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.128803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.128913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.129200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.129340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.129470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.129593] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.129715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.129828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.129939] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.130063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.130489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.130645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.130754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.131043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.131185] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.131311] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.131437] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.131559] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.131668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.131782] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.131889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.132325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.132483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.132598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.132878] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.133033] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.133158] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.133279] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.133405] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.133519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.133638] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.133746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.134203] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.134363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.134474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.134765] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.134904] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.135051] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.135176] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.135299] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.135413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.135528] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.135636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.136068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.136244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.136352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.136626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.136766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.136894] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.137027] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.137151] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.137264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.137379] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.137490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.137914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.138082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.138192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.138469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.138610] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.138750] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.138876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.139009] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.139119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.139232] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.139343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.139768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.139927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.140045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.140322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.140467] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.140594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.140716] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.140837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.140951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.141075] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.141180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.141604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.141759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.141865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.142144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.142284] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.142413] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.142536] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.142658] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.142769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.142880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.142998] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.143420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.143586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.143706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.143991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.144140] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.144267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.144394] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.144515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.144623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.144736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.144843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.145293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.145458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.145568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.145852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.146001] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.146127] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.146251] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.146378] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.146486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.146598] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.146707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.147137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.147295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.147407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.147684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.147837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.147966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.148112] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.148237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.148347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.148461] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.148569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.148999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.149164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.149272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.149548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.149685] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.149812] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.149934] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.150068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.150175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.150289] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.150397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.150822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.150984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.151098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.151373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.151513] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.151645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.151769] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.151891] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.152015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.152128] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.152254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.152680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.152854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.152963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.153258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.153399] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.153527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.153649] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.153772] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.153883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.154008] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.154120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.154545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.154705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.154818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.155104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.155243] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.155369] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.155494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.155616] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.155725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.155840] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.155949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.156405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.156566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.156674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.156949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.157103] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.157248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.157374] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.157495] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.157608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.157721] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.157830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.158261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.158423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.158533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.158806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.158947] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.159085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.159208] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.159328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.159439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.159555] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.159664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.160093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.160253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.160362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.160643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.160786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.160912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.161048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.161175] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.161284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.161396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.161520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.161948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.162125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.162235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.162515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.162655] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.162785] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.162911] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.163046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.163156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.163269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.163376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.163803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.163958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.164083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.164359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.164496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.164620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.164744] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.164867] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.164978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.165107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.165216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.165639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.165796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.165904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.166206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.166349] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.166486] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.166611] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.166733] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.166841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.166954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.167094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.167520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.167679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.167789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.168073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.168215] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.168343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.168467] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.168587] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.168697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.168811] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.168919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.169358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.169519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.169630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.169908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.170067] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.170196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.170323] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.170447] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.170557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.170673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.170796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.171226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.171390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.171499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.171777] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.171918] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.172063] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.172187] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.172307] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.172420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.172536] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.172645] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.173074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.173253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.173363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.173639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.173781] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.173908] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.174043] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.174168] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.174285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.174399] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.174505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.174930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.175121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.175233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.175507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.175649] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.175774] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.175897] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.176051] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.176169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.176284] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.176393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.176817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.177006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.177122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.177400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.177539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.177666] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.177791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.177914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.178060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.178176] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.178284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.178705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.178880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.178996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.179278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.179420] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.179545] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.179665] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.179787] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.179900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.180032] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.180141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.180563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.180781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.180909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.181201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.181343] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.181470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.181592] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.181715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.181825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.181937] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.182061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.182492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.182689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.182798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.183085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.183226] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.183355] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.183481] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.183603] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.183718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.183832] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.183941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.184379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.184552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.184661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.184934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.185105] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.185235] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.185361] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.185481] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.185593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.185708] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.185815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.186247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.186421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.186532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.186809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.186951] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.187092] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.187215] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.187337] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.187445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.187558] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.187665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.188095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.188257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.188365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.188640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.188777] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.188901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.189062] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.189187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.189300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.189413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.189532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.189958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.190143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.190253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.190530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.190670] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.190795] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.190918] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.191050] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.191159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.191276] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.191385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.191816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.191975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.192100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.192383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.192527] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.192654] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.192778] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.192902] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.193028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.193142] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.193249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.193673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.193828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.193950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.194241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.194381] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.194509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.194632] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.194751] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.194860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.194973] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.195105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.195530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.195691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.195798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.196078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.196221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.196348] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.196471] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.196592] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.196702] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.196816] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.196922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.197353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.197505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.197614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.197888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.198042] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.198174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.198298] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.198434] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.198547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.198663] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.198770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.199201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.199362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.199470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.199742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.199880] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.200031] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.200154] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.200278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.200389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.200503] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.200611] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.201042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.201202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.201310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.201582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.201722] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.201848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.201970] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.202112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.202222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.202334] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.202439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.202863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.203067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.203177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.203458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.203596] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.203722] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.203846] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.203968] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.204097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.204213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.204320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.204743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.204905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.205026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.205304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.205445] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.205573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.205697] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.205821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.205931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.206061] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.206168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.206590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.206748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.206856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.207143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.207290] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.207417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.207540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.207663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.207775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.207893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.208010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.208435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.208619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.208726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.209010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.209149] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.209278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.209403] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.209524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.209634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.209749] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.209856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.210291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.210455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.210564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.210843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.211015] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.211145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.211274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.211397] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.211506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.211621] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.211736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.212165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.212326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.212434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.212709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.212867] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.213008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.213134] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.213259] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.213370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.213483] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.213591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.214023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.214184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.214293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.214571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.214711] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.214838] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.214963] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.215106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.215216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.215333] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.215443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.215869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.216039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.216146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.216422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.216563] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.216690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.216813] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.216950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.217077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.217193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.217304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.217729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.217889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.218011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.218287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.218426] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.218555] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.218679] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.218803] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.218913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.219046] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.219157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.219582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.219752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.219861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.220153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.220299] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.220423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.220547] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.220674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.220783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.220894] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.221007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.221432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.221610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.221721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.222022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.222165] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.222292] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.222418] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.222539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.222652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.222770] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.222879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.223309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.223470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.223579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.223857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.224011] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.224136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.224261] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.224381] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.224489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.224607] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.224715] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.225148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.225312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.225421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.225695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.225838] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.225963] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.226108] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.226248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.226359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.226471] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.226578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.227013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.227181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.227290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.227566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.227710] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.227836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.227960] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.228104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.228214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.228327] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.228435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.228858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.229041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.229154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.229432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.229571] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.229698] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.229821] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.229942] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.230078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.230193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.230300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.230724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.230883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.231004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.231288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.231446] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.231575] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.231698] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.231818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.231929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.232052] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.232160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.232585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.232744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.232854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.233150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.233292] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.233417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.233541] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.233662] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.233772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.233887] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.234001] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.234424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.234582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.234688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.234961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.235120] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.235247] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.235371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.235493] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.235601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.235715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.235822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.236252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.236439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.236550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.236827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.236964] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.237113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.237239] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.237361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.237473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.237587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.237695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.238126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.238294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.238407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.238683] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.238827] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.238955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.239096] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.239225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.239340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.239456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.239565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.240004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.240180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.240295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.240572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.240719] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.240848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.240970] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.241113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.241224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.241341] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.241454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.241880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.242052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.242164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.242441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.242582] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.242709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.242831] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.242950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.243075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.243189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.243295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.243719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.243879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.243993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.244271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.244411] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.244537] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.244659] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.244777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.244888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.245025] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.245133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.245559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.245738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.245845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.246129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.246274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.246401] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.246525] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.246646] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.246755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.246869] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.246976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.247417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.247578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.247686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.247965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.248125] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.248249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.248371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.248494] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.248604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.248715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.248822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.249250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.249507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.249669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.249953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.250115] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.250240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.250364] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.250491] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.250604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.250718] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.250826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.251256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.251623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.251801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.252143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.252354] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.252484] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.252612] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.252737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.252850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.252962] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.253102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.253597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.253882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.254051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.254376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.255034] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.255169] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.255301] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.255424] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.255537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.255655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.255762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.256230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.256408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.256541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.256832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.256976] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.257124] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.257247] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.257369] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.257483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.257597] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.257706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.258139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.258331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.258440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.258716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.258857] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.258992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.259116] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.259241] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.259358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.259469] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.259576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.260011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.260192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.260302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.260579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.260717] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.260846] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.260970] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.261110] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.261225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.261341] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.261448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.261877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.262100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.262214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.262490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.262627] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.262753] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.262876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.263006] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.263121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.263238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.263347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.263773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.263945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.264063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.264343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.264485] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.264615] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.264741] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.264861] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.264976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.265110] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.265218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.265644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.265821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.265970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.266262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.266407] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.266534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.266654] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.266777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.266890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.267027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.267138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.267564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.267766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.267874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.268162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.268303] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.268430] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.268555] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.268674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.268786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.268901] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.269022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.269448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.269619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.269728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.270014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.270160] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.270288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.270413] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.270534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.270641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.270758] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.270867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.271299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.271473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.271588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.271864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.272016] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.272147] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.272273] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.272393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.272505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.272622] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.272731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.273166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.273333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.273444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.273719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.273862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.274002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.274134] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.274254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.274366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.274480] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.274588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.275022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.275189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.275303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.275580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.275723] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.275850] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.275972] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.276111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.276220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.276335] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.276444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.276870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.277042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.277154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.277431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.277574] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.277702] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.277823] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.277945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.278089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.278204] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.278312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.278735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.278896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.279015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.279290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.279431] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.279558] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.279681] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.279806] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.279915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.280044] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.280155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.280579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.280737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.280845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.281129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.281274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.281404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.281530] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.281653] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.281762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.281874] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.281992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.282428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.282588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.282695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.282971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.283125] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.283252] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.283374] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.283495] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.283604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.283719] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.283825] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.284255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.284414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.284522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.284801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.284941] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.285082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.285207] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.285328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.285438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.285553] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.285661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.286095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.286256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.286363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.286637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.286776] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.286903] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.287038] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.287161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.287271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.287386] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.287497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.287923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.288106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.288216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.288492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.288631] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.288759] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.288883] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.289030] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.289142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.289255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.289364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.289788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.289948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.290071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.290352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.290493] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.290624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.290749] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.290871] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.290994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.291113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.291224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.291652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.291809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.291918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.292201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.292342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.292472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.292599] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.292724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.292837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.292950] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.293073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.293498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.293661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.293769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.294067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.294212] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.294337] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.294463] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.294587] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.294700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.294818] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.294929] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.295366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.295521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.295635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.295909] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.296061] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.296186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.296310] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.296434] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.296543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.296657] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.296764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.297193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.297351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.297465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.297741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.297882] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.298021] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.298146] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.298269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.298381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.298492] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.298598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.299030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.299188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.299298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.299571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.299712] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.299839] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.299963] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.300121] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.300233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.300350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.300462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.300887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.301053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.301165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.301440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.301581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.301712] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.301837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.301959] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.302088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.302202] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.302309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.302734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.302893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.303012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.303289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.303429] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.303554] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.303679] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.303802] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.303911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.304033] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.304141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.304562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.304732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.304841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.305119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.305261] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.305388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.305514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.305638] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.305749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.305863] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.305972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.306411] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.306573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.306687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.306966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.307121] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.307248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.307372] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.307498] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.307610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.307722] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.307829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.308258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.308423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.308533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.308810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.308953] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.309092] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.309217] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.309340] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.309451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.309564] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.309671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.310105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.310266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.310371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.310646] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.310786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.310913] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.311068] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.311189] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.311300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.311416] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.311524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.311948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.312117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.312227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.312509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.312651] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.312779] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.312901] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.313040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.313153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.313269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.313375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.313799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.313953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.314076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.314356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.314494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.314622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.314745] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.314864] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.314971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.315099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.315208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.315633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.315789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.315897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.316183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.316326] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.316456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.316582] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.316704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.316812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.316923] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.317041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.317468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.317628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.317738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.318021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.318168] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.318296] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.318420] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.318541] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.318652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.318765] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.318872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.319310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.319471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.319582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.319860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.320010] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.320138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.320261] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.320383] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.320495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.320609] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.320717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.321152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.321323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.321432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.321710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.321850] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.321973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.322130] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.322255] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.322365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.322478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.322586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.323020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.323189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.323300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.323576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.323712] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.323837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.323960] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.324098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.324207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.324320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.324429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.324854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.325040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.325151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.325427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.325570] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.325699] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.325822] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.325945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.326090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.326206] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.326315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.326738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.326904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.327029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.327309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.327452] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.327580] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.327703] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.327820] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.327927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.328059] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.328170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.328594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.328752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.328861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.329144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.329292] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.329419] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.329545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.329668] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.329780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.329893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.330008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.330432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.330588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.330700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.330975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.331127] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.331256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.331379] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.331503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.331614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.331731] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.331843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.332272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.332435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.332541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.332818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.332957] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.333113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.333242] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.333366] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.333477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.333592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.333700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.334127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.334289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.334395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.334671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.334809] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.334935] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.335073] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.335195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.335309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.335422] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.335532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.335960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.336140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.336247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.336524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.336661] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.336790] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.336914] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.337051] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.337161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.337276] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.337383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.337809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.337967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.338094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.338375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.338519] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.338646] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.338768] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.338886] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.339007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.339124] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.339236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.339662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.339824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.339932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.340219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.340359] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.340485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.340608] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.340728] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.340835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.340949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.341072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.341495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.341663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.341774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.342056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.342204] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.342330] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.342455] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.342577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.342688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.342805] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.342915] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.343355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.343514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.343628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.343906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.344081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.344209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.344334] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.344456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.344568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.344684] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.344792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.345224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.345389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.345499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.345773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.345912] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.346056] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.346181] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.346300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.346407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.346520] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.346629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.347059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.347222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.347330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.347605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.347745] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.347873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.348009] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.348130] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.348237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.348352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.348462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.348884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.349052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.349161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.349438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.349579] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.349704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.349829] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.349950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.350075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.350191] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.350297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.350723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.350883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.351003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.351283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.351422] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.351548] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.351671] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.351791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.351899] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.352028] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.352135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.352560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.352714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.352820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.353106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.353249] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.353376] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.353496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.353619] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.353731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.353845] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.353952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.354394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.354556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.354666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.354941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.355112] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.355242] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.355365] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.355491] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.355603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.355715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.355821] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.356252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.356413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.356521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.356796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.356935] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.357084] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.357211] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.357333] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.357444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.357559] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.357666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.358108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.358271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.358382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.358658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.358795] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.358923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.359067] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.359190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.359299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.359414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.359523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.359949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.360127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.360236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.360513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.360653] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.360780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.360904] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.361041] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.361154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.361269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.361375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.361799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.361959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.362087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.362371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.362508] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.362634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.362759] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.362879] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.362996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.363108] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.363215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.363639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.363797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.363904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.364196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.364338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.364465] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.364588] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.364707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.364815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.364931] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.365050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.365474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.365631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.365740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.366046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.366186] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.366313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.366437] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.366562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.366673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [185.366786] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.366892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.367329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.367676] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 0 to 2 or reprobing

<7> [185.367683] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [185.367700] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [185.367937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.419131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [185.437702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [185.437736] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [185.437857] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [185.456865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [185.456872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [185.456968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.457106] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] status updated from disconnected to connected

<7> [185.457501] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] probed modes :

<7> [185.457515] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [185.457521] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [185.457524] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [185.457529] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [185.457531] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [185.457573] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [185.457586] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [185.457788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.508124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [185.526700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [185.526712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [185.526836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [185.545819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [185.545826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [185.545921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.546094] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] probed modes :

<7> [185.546107] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [185.546111] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [185.546114] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [185.546117] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [185.546120] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [185.546284] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 2 to 1 or reprobing

<7> [185.546290] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [185.546305] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [185.546417] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] status updated from connected to disconnected

<7> [185.546571] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [185.546670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [185.546681] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [185.546781] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [185.546879] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 1 to 0 or reprobing

<7> [185.546884] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [185.546894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [185.547017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.598128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [185.616703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [185.616707] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [185.616805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [185.635851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [185.635855] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [185.635954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.636103] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [185.636156] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [185.636171] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [185.636296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.687136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [185.705685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [185.705689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [185.705789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [185.724865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [185.724868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [185.724967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.725111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<6> [185.725388] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS

<7> [185.725902] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing

<7> [185.725907] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1]

<7> [185.725919] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [185.726138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.726262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.726591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.726746] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.726876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [185.727013] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [185.727145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [185.727254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [185.727519] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 turning VDD on

<7> [185.727652] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 wait for panel power cycle

<7> [185.727877] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [185.728007] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [185.728218] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [185.728333] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 panel power wasn't enabled

<7> [185.798574] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00020000, dig 0x000000a0, pins 0x00000020, long 0x00000020

<7> [185.798654] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:235:DDI B/PHY B] - long

<7> [185.798783] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 5 - cnt: 20

<7> [185.798919] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:235:DDI B/PHY B]

<7> [185.933850] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00

<7> [185.933965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [185.934676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes

<7> [185.934775] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [185.934873] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [185.934970] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [185.935113] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [185.935118] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [185.935122] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [185.935126] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [185.935159] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [185.935265] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [185.936118] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [185.936217] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [185.936951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes :

<7> [185.936962] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa

<7> [185.936966] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa

<7> [185.937008] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1]

<7> [185.937021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [185.937885] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00

<7> [185.937994] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [185.938655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes

<7> [185.938753] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [185.938848] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [185.938940] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [185.939058] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [185.939062] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [185.939064] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [185.939067] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [185.939077] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [185.939172] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [185.940013] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [185.940108] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [185.940814] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes :

<7> [185.940825] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa

<7> [185.940828] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa

<7> [185.940922] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:eDP-1] EDID override reset

<7> [185.940948] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1]

<7> [185.940961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [185.941825] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00

<7> [185.941923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [185.942596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes

<7> [185.942688] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [185.942785] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [185.942878] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [185.942988] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [185.942992] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [185.942994] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [185.942997] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [185.943007] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [185.943097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [185.943926] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [185.944047] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [185.944750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes :

<7> [185.944761] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa

<7> [185.944765] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa

<7> [185.944851] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:246:DP-1] EDID override reset

<7> [185.944867] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1]

<7> [185.944880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1]

<7> [185.945046] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected

<7> [185.945147] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [185.945151] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [185.945162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [185.956132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out after NAK

<7> [185.956299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [185.967127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out after NAK

<7> [185.967297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [186.019128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [186.035285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.035290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [186.035395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [186.051280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.051284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [186.051388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [186.051445] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [186.051461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [186.102129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [186.118292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.118296] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [186.118394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [186.134332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.134336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [186.134441] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [186.134552] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:258:HDMI-A-1] EDID override reset

<7> [186.134567] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [186.134577] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [186.185136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [186.201311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.201315] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [186.201414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [186.217342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.217345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [186.217447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [186.217575] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:264:DP-2] EDID override reset

<7> [186.217594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2]

<7> [186.217609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]

<7> [186.217786] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] disconnected

<7> [186.217859] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:DP-3] EDID override reset

<7> [186.217870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3]

<7> [186.217880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]

<7> [186.218038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] disconnected

<7> [186.218563] [drm:status_store] [CONNECTOR:258:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [186.218567] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [186.218579] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [186.269192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [186.286368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.286372] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [186.286478] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [186.303303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.303307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [186.303408] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [186.303472] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing

<7> [186.303478] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1]

<7> [186.303493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [186.304395] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00

<7> [186.304497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [186.305176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes

<7> [186.305271] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [186.305368] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [186.305462] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [186.305567] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [186.305571] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [186.305574] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [186.305577] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [186.305590] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [186.305680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [186.306512] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [186.306613] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [186.307347] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes :

<7> [186.307359] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa

<7> [186.307363] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa

<7> [186.307527] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [186.307880] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [186.308019] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 138780KHz

<7> [186.308120] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 2 clock 270000 bpp 24

<7> [186.308214] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 416340 available 540000

<7> [186.308309] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no

<7> [186.308410] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [186.308520] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI B/PHY B] [CRTC:80:pipe A]

<7> [186.308616] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.enable (expected 0, found 1)

<7> [186.308726] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.active (expected 0, found 1)

<7> [186.308837] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in cpu_transcoder (expected -1, found 0)

<7> [186.308945] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in lane_count (expected 0, found 2)

<7> [186.309078] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in output_types (expected 0x00000000, found 0x00000100)

<7> [186.309187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in framestart_delay (expected 0, found 1)

<7> [186.309299] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [186.309408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [186.309516] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [186.309625] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [186.309734] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [186.309844] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [186.309954] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [186.310085] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vtotal (expected 0, found 1112)

<7> [186.310196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [186.310303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vblank_end (expected 0, found 1112)

<7> [186.310413] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [186.310522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [186.310629] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [186.310733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [186.310843] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [186.310952] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [186.311072] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [186.311181] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [186.311289] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [186.311396] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vtotal (expected 0, found 1112)

<7> [186.311501] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [186.311607] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1112)

<7> [186.311717] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [186.311826] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [186.311934] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in pixel_multiplier (expected 0, found 1)

<7> [186.312063] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [186.312178] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [186.312288] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in pipe_bpp (expected 0, found 24)

<7> [186.312397] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset mismatch in port_clock (expected 0, found 270000)

<7> [186.312532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [186.312635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [186.312748] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4060), size 0 -> 4060

<7> [186.312850] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4060 - 4096), size 0 -> 36

<7> [186.312953] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [186.313073] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 4, 6, 7, 10, 10, 0, 0, 0, 3, 0

<7> [186.313171] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 65, 97, 113, 161, 161, 0, 0, 30, 49, 63

<7> [186.313271] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 73, 108, 126, 179, 179, 0, 0, 31, 55, 64

<7> [186.313374] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 555120 num active planes 1

<7> [186.313487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 21855 required 583

<7> [186.313602] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33330 required 583

<7> [186.313710] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 34924 required 583

<7> [186.313816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 34924 required 583

<7> [186.313923] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 583

<7> [186.314052] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 41600 required 583

<7> [186.314163] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 583

<7> [186.314282] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (69390 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz)

<7> [186.314395] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (10843 kHz) > old min cdclk (0 kHz)

<7> [186.314511] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz

<7> [186.314626] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [186.314739] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0

<7> [186.314848] i915 0000:00:02.0: [drm:intel_reference_shared_dpll.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0

<7> [186.314957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset]

<7> [186.315088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB

<7> [186.315202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [186.315310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [186.315418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [186.315524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [186.315628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [186.315736] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 2; data_m: 6467616, data_n: 8388608, link_m: 269484, link_n: 524288, tu: 64

<7> [186.315847] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 2; data_m: 5174839, data_n: 8388608, link_m: 215618, link_n: 524288, tu: 64

<7> [186.315956] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [186.316130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [186.316255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0

<7> [186.316362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa

<7> [186.316473] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa

<7> [186.316584] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=138780, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1112 vs=1083-1088 vt=1112, flags=0xa

<7> [186.316693] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa

<7> [186.316802] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=138780, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1112 vs=1083-1088 vt=1112, flags=0xa

<7> [186.316911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 138780

<7> [186.317033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 120, ips linetime: 0

<7> [186.317142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [186.317251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [186.317361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 1

<7> [186.317471] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x88, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [186.317579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [186.317688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [186.317796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:282] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [186.317912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [186.318035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [186.318150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [186.318259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [186.318367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [186.318474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [186.318584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [186.318804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [186.318940] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B]

<7> [186.319061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:245:DDI TC1/PHY TC1]

<7> [186.319164] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST A]

<7> [186.319269] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST B]

<7> [186.319375] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST C]

<7> [186.319482] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:250:DP-MST D]

<7> [186.319587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DDI TC2/PHY TC2]

<7> [186.319692] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC3/PHY TC3]

<7> [186.319799] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A]

<7> [186.319905] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B]

<7> [186.320020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C]

<7> [186.320128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D]

<7> [186.320229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC4/PHY TC4]

<7> [186.320329] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A]

<7> [186.320429] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B]

<7> [186.320528] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C]

<7> [186.320627] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D]

<7> [186.320730] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [186.320847] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [186.320956] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [186.321086] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [186.321200] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [186.321308] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [186.321419] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [186.321544] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [186.321731] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A]

<7> [186.321843] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [186.322013] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 turn panel power on

<7> [186.322135] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 wait for panel power cycle

<7> [186.322337] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [186.322454] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [186.322608] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 wait for panel power on

<7> [186.322801] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI B/PHY B] PPS 1 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [186.533277] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [186.533880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [186.536483] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 0a 82 41 00 00 01 c0 02 00 00 00 0f 09 00

<7> [186.536566] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [ENCODER:235:DDI B/PHY B] Using LINK_BW_SET value 0a

<7> [186.537854] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 2, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [186.538398] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS1

<7> [186.540111] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [ENCODER:235:DDI B/PHY B][DPRX] Clock recovery OK

<7> [186.540391] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS2

<7> [186.542666] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [ENCODER:235:DDI B/PHY B][DPRX] Channel EQ done. DP Training successful

<7> [186.542848] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI B/PHY B][DPRX] Link Training passed at link rate = 270000, lane count = 2

<7> [186.543548] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [186.543796] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [186.543946] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [186.544165] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 96000

<7> [186.544501] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [186.544662] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [186.560766] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [186.561763] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1]

<7> [186.562382] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [186.563393] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI B/PHY B] Fec status: 0

<7> [186.563821] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [186.564925] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]

<7> [186.565617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1]

<7> [186.565689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]

<7> [186.567338] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 00 02 01 00 01 80 06 01 06 00 08 00 00

<7> [186.567618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [186.568631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: no, sink: no, modparam: yes

<7> [186.568901] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [186.569207] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [186.569470] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [186.569960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [186.569972] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [186.570005] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor

<7> [186.570021] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0

<7> [186.570078] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no

<7> [186.570287] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [186.571305] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [186.571483] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [186.572630] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes :

<7> [186.572674] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0xa

<7> [186.572687] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 48 111040 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0xa

<7> [186.572697] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1]

<7> [186.572728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1]

<7> [186.573323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected

<7> [186.573358] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1]

<7> [186.573395] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:258:HDMI-A-1]

<7> [186.625198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc2] timed out, falling back to bit banging on pin 10

<7> [186.642351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.642356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [186.642479] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [186.659303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [186.659307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [186.659406] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:258:HDMI-A-1] disconnected

<7> [186.659419] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2]

<7> [186.659429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]

<7> [186.659571] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-2] disconnected

<7> [186.659582] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3]

<7> [186.659592] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]

<7> [186.659728] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:273:DP-3] disconnected

<7> [186.659738] [drm:drm_client_modeset_probe] connector 236 enabled? yes

<7> [186.659741] [drm:drm_client_modeset_probe] connector 246 enabled? no

<7> [186.659743] [drm:drm_client_modeset_probe] connector 258 enabled? no

<7> [186.659745] [drm:drm_client_modeset_probe] connector 264 enabled? no

<7> [186.659746] [drm:drm_client_modeset_probe] connector 273 enabled? no

<7> [186.659835] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [186.659850] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236

<7> [186.659853] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0

<7> [186.659855] [drm:drm_client_modeset_probe] found mode 1920x1080

<7> [186.659857] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1080 config

<7> [186.659889] [drm:drm_client_modeset_probe] desired mode 1920x1080 set on crtc 80 (0,0)

<6> [186.694641] Console: switching to colour frame buffer device 240x67

Results for igt@kms_force_connector_basic@force-connector-state