Results for igt@core_hotunplug@unbind-rebind

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-gb7d168f61 (x86_64) (Linux: 6.4.0-rc7-linus-v6.4-rc7-g45a3e24f65e9+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: unbind-rebind
Opened device: /dev/dri/renderD128
Unloaded audio driver snd_hda_intel
Realoading snd_hda_intel
Subtest unbind-rebind: SUCCESS (1.736s)
Err 
Starting subtest: unbind-rebind
Subtest unbind-rebind: SUCCESS (1.736s)
Dmesg
<6> [101.125712] Console: switching to colour dummy device 80x25
<6> [101.125844] [IGT] core_hotunplug: executing
<7> [101.129174] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [101.129597] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [101.129798] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [101.130328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.133316] [IGT] core_hotunplug: closing selected device instance
<7> [101.133595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.134306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.135526] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.135669] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [101.135804] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.135932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [101.136061] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.136192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [101.136335] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.136479] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [101.136609] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.136743] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [101.136884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.137006] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.137119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<6> [101.138685] [IGT] core_hotunplug: starting subtest unbind-rebind
<7> [101.145835] [IGT] core_hotunplug: reopening DRM device for health check
<7> [101.145862] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [101.146204] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [101.147808] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [101.147926] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [101.148155] [IGT] core_hotunplug: closing health checked device instance
<7> [101.148510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.149200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.150822] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.150971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [101.151109] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.151252] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [101.151392] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.151532] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [101.151666] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.151807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [101.151945] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.152082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [101.152241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.152371] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.152533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.153967] [IGT] core_hotunplug: reopening render device for health check
<7> [101.153994] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [101.154373] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [101.155757] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [101.155938] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [101.156199] [IGT] core_hotunplug: closing health checked device instance
<7> [101.156525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.157211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.158470] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.158670] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [101.158834] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.158971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [101.159114] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.159708] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [101.159885] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.160041] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [101.160178] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.160391] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [101.160685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.160813] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.160933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.267395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.279516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.279902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.280934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.282176] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.282545] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [101.282879] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.283194] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [101.283539] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.284036] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [101.284526] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.284989] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [101.285404] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.285782] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [101.286094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.286387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [101.286793] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7> [101.300249] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [101.300504] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [101.300704] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [101.300894] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [101.301087] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [101.301304] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [101.301492] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [101.301690] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [101.301873] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [101.302061] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [101.302259] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [101.302439] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [101.302613] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [101.302785] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [101.302949] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [101.303114] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [101.303287] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [101.303442] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [101.303605] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [101.303753] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [101.303905] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [101.304051] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [101.304201] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [101.304357] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [101.304499] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [101.304636] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [101.304765] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [101.304896] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [101.305025] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [101.305153] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [101.305285] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [101.305412] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [101.305533] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [101.305648] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [101.305767] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [101.305882] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [101.306605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [101.306800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [101.306942] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)
<7> [101.307054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [101.307171] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [101.307298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [101.308541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [101.382940] [IGT] core_hotunplug: unbinding the driver from the device
<7> [101.383373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.383747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.384748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [101.385975] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.386310] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [101.386626] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.386957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [101.387311] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.387648] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [101.387980] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.388324] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [101.388654] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.388973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [101.389302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.389609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [101.390047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4
<7> [101.390390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5
<7> [101.417503] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]
<7> [101.479287] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper
<7> [101.480110] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind
<7> [101.589740] [IGT] core_hotunplug: rebinding the driver to the device
<7> [101.591471] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K
<7> [101.591847] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=2 (guc:yes submission:no huc:yes slpc:no)
<7> [101.592219] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH
<7> [101.592634] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7> [101.593157] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 19200 kHz
<7> [101.593547] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vcs2 fused off
<7> [101.593830] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0001, instances: 0001
<7> [101.594097] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001
<7> [101.595017] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [101.595331] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [101.595578] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M
<6> [101.595816] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6> [101.595874] i915 0000:00:02.0: vgaarb: deactivate vga console
<6> [101.596447] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7> [101.596472] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000050200087
<7> [101.596750] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K
<7> [101.597518] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x44a53018
<7> [101.597777] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0
<7> [101.597979] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [101.598155] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [101.598353] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7> [101.598555] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)
<7> [101.598726] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2
<7> [101.598898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no
<7> [101.599050] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50
<7> [101.599262] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=2668 tRP=19 tRDPRE=10 tRAS=43 tRCD=19 tRC=62
<7> [101.599454] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68
<7> [101.599644] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=3201 tRP=22 tRDPRE=12 tRAS=52 tRCD=22 tRC=74
<7> [101.599824] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32
<7> [101.599995] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=48
<7> [101.600156] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=64
<7> [101.600330] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=10461
<7> [101.600494] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=11821
<7> [101.600649] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=12291
<7> [101.600804] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=13170
<7> [101.600964] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133
<7> [101.601107] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=51200
<7> [101.601360] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=68267
<7> [101.601549] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=2 deratedbw=12447
<7> [101.601684] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=2 deratedbw=14636
<7> [101.601818] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=2 deratedbw=15540
<7> [101.601947] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=2 deratedbw=16761
<7> [101.602074] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=2 bw=34133
<7> [101.602201] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=2 bw=51200
<7> [101.602335] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=2 bw=68267
<7> [101.602460] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=13753
<7> [101.602581] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=16614
<7> [101.602694] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=17907
<7> [101.602813] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=19408
<7> [101.602923] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133
<7> [101.603031] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=51200
<7> [101.603142] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=68267
<7> [101.603280] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=14515
<7> [101.603401] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=17818
<7> [101.603510] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=19384
<7> [101.603621] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=21072
<7> [101.603730] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133
<7> [101.603840] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=51200
<7> [101.603952] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=68267
<7> [101.604066] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=14928
<7> [101.604176] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=18487
<7> [101.604303] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=20216
<7> [101.604420] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=22015
<7> [101.604529] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133
<7> [101.604638] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=51200
<7> [101.604750] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=68267
<7> [101.604859] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=15143
<7> [101.604967] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=18842
<7> [101.605078] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=20661
<7> [101.605187] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=22519
<7> [101.605311] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133
<7> [101.605429] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=51200
<7> [101.605536] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=68267
<7> [101.605902] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [101.606023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 243
<7> [101.606143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 6, min size 7)
<7> [101.606270] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)
<7> [101.606393] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)
<7> [101.606510] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7> [101.606625] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812)
<7> [101.606743] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)
<7> [101.606854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers
<7> [101.606976] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7> [101.607099] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1364, min size 1366)
<7> [101.607217] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)
<7> [101.607355] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 58, min size 78)
<7> [101.607474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)
<7> [101.607585] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)
<7> [101.607704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [101.607815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [101.607924] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7> [101.608044] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7> [101.608159] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [101.608289] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7> [101.608407] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [101.608525] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [101.608642] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same DDC pin (0xa) as port A, disabling port A DVI/HDMI support
<7> [101.608753] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [101.608865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0
<7> [101.608983] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [101.609090] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0
<7> [101.609198] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI max TMDS clock: 297000 kHz
<7> [101.609333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [101.609446] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0
<7> [101.609554] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [101.609665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0
<7> [101.609771] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [101.609882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0
<7> [101.609993] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a
<7> [101.610113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [101.610280] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.610415] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [101.610542] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.610667] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [101.610791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.610912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [101.611040] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.611169] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [101.611319] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.611450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [101.611564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [101.611685] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [101.611808] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [101.611969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [101.612079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [101.612189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [101.612340] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.612471] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [101.612592] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.612717] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [101.612841] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.612964] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [101.613090] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.613215] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [101.613363] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [101.613487] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [101.613599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [101.613715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [101.613828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4
<7> [101.613943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5
<7> [101.614133] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adls_dmc_ver2_01.bin
<7> [101.615075] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7> [101.615941] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 20 us
<6> [101.616732] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1)
<7> [101.616667] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)
<7> [101.616828] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 20 (20.0 usec)
<7> [101.616955] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 29 (29.0 usec)
<7> [101.617061] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 49 (49.0 usec)
<7> [101.617163] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 64 (64.0 usec)
<7> [101.617296] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 73 (73.0 usec)
<7> [101.617407] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 98 (98.0 usec)
<7> [101.617515] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 150 (150.0 usec)
<7> [101.619564] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 4 display pipes available.
<7> [101.622037] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [101.622193] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind
<6> [101.622338] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
<7> [101.622437] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz
<7> [101.622564] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 1305600 kHz
<7> [101.622701] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT)
<7> [101.622817] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A]
<7> [101.622942] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2
<7> [101.623062] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2
<7> [101.623183] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless
<7> [101.623319] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7> [101.623465] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300
<7> [101.623584] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002
<7> [101.623730] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName
<7> [101.623875] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz
<7> [101.623994] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7> [101.624136] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0
<7> [101.624348] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000
<7> [101.624460] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7> [101.624555] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7> [101.624648] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
<7> [101.624765] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7> [101.624969] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7> [101.625111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [101.625424] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on
<7> [101.625555] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle
<7> [101.625733] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [101.625884] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [101.626039] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [101.626151] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled
<7> [101.865239] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [101.894238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [101.923239] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [101.952238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [101.981238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.010238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.039239] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.068238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.097238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.126238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.155250] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.184238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.213238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.242238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.271239] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.300238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.329238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.358238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.387239] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.416238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.445238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.474238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.503239] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.532238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.561238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.590238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.619239] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.648238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.677238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.706238] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.735240] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.764239] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [102.764357] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110
<6> [102.764375] i915 0000:00:02.0: [drm] [ENCODER:235:DDI A/PHY A] failed to retrieve link info, disabling eDP
<7> [102.764406] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off
<7> [102.764556] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [102.764655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [102.764862] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI TC1/PHY B] using AUX D (VBT)
<7> [102.764982] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:235:DDI TC1/PHY B]
<7> [102.765073] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:235:DDI TC1/PHY B] Using DDC pin 0x9 (VBT)
<7> [102.765301] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:245:DDI TC2/PHY C] using AUX E (VBT)
<7> [102.765410] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:245:DDI TC2/PHY C]
<7> [102.765640] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:245:DDI TC2/PHY C]
<7> [102.765734] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:245:DDI TC2/PHY C] Using DDC pin 0xa (VBT)
<7> [102.765874] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:258:DDI TC3/PHY D] using AUX F (VBT)
<7> [102.765976] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:258:DDI TC3/PHY D]
<7> [102.766069] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:258:DDI TC3/PHY D] Using DDC pin 0xb (VBT)
<7> [102.766207] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC4/PHY E] using AUX G (VBT)
<7> [102.766318] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC4/PHY E]
<7> [102.766526] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:262:DDI TC4/PHY E]
<7> [102.766615] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:262:DDI TC4/PHY E] Using DDC pin 0xc (VBT)
<7> [102.767035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled
<7> [102.767196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled
<7> [102.767375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled
<7> [102.767526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled
<7> [102.767640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [102.767745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A
<7> [102.767858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A
<7> [102.767964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A
<7> [102.768067] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A
<7> [102.768167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A
<7> [102.768287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B
<7> [102.768401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B
<7> [102.768502] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B
<7> [102.768604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B
<7> [102.768712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B
<7> [102.768820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B
<7> [102.768927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C
<7> [102.769035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C
<7> [102.769142] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C
<7> [102.769265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C
<7> [102.769382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C
<7> [102.769489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C
<7> [102.769592] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D
<7> [102.769695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D
<7> [102.769803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D
<7> [102.769911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D
<7> [102.770020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D
<7> [102.770124] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D
<7> [102.770239] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI TC1/PHY B] hw state readout: disabled, pipe A
<7> [102.770357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:245:DDI TC2/PHY C] hw state readout: disabled, pipe A
<7> [102.770459] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST A] hw state readout: disabled, pipe A
<7> [102.770558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST B] hw state readout: disabled, pipe B
<7> [102.770653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST C] hw state readout: disabled, pipe C
<7> [102.770751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:250:DP-MST D] hw state readout: disabled, pipe D
<7> [102.770859] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:258:DDI TC3/PHY D] hw state readout: disabled, pipe A
<7> [102.770965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC4/PHY E] hw state readout: disabled, pipe A
<7> [102.771064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A
<7> [102.771164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B
<7> [102.771277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C
<7> [102.771384] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D
<7> [102.771487] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [102.771601] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [102.771711] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [102.771824] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [102.771985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:HDMI-A-1] hw state readout: disabled
<7> [102.772105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:246:DP-1] hw state readout: disabled
<7> [102.772215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:255:HDMI-A-2] hw state readout: disabled
<7> [102.772344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:259:HDMI-A-3] hw state readout: disabled
<7> [102.772457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled
<7> [102.772567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:271:HDMI-A-4] hw state readout: disabled
<7> [102.772669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz
<7> [102.772769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz
<7> [102.772872] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz
<7> [102.772972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz
<7> [102.773069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz
<7> [102.773166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz
<7> [102.773282] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0
<7> [102.773402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz
<7> [102.773504] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz
<7> [102.773606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz
<7> [102.773708] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz
<7> [102.773811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz
<7> [102.773913] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz
<7> [102.774016] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0
<7> [102.774132] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz
<7> [102.774242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz
<7> [102.774353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz
<7> [102.774458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz
<7> [102.774561] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz
<7> [102.774664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz
<7> [102.774765] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0
<7> [102.774878] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz
<7> [102.774983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz
<7> [102.775086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz
<7> [102.775189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz
<7> [102.775303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz
<7> [102.775406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz
<7> [102.775508] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0
<7> [102.775681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]
<7> [102.775798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]
<7> [102.775907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state]
<7> [102.776017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state]
<7> [102.776130] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [102.776265] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [102.776378] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [102.776475] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [102.781898] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K)
<7> [102.782031] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture
<7> [102.782137] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]
<7> [102.782263] MCR Steering: Default steering: group=0x0, instance=0x0
<7> [102.782285] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 3 GT workarounds on global
<7> [102.782875] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 10 engine workarounds on rcs'0
<7> [102.783001] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0
<7> [102.783122] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0
<7> [102.783837] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0
<7> [102.783960] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0
<7> [102.784078] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0
<7> [102.784527] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0
<7> [102.784646] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0
<7> [102.784925] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0
<7> [102.785046] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0
<7> [102.786407] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7> [102.786556] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset
<7> [102.803055] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f
<7> [102.803179] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000
<7> [102.803306] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000
<7> [102.803431] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7> [102.803545] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8
<7> [102.803656] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x4682000c
<7> [102.803766] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7> [102.803879] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7> [102.803990] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7> [102.804103] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7> [102.804212] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7> [102.804331] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7> [102.804450] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7> [102.804559] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<7> [102.804669] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no
<6> [102.805522] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.5.1
<6> [102.805525] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
<7> [102.813023] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 300MHz, before = 300MHz, status = 0x8002F0EC, count = 0, ret = 0
<7> [102.813724] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6> [102.818973] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!
<6> [102.818978] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
<6> [102.818979] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
<7> [102.823924] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping
<7> [102.824053] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping
<7> [102.824163] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping
<7> [102.824283] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping
<7> [102.824393] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
<7> [102.824509] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [102.824962] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0
<7> [102.825079] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0
<7> [102.825191] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0
<7> [102.825310] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0
<7> [102.827727] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:HDMI-A-1] generating connector hotplug event
<7> [102.827962] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY C bus for card0-DP-1
<7> [102.828453] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:246:DP-1] generating connector hotplug event
<7> [102.828660] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:255:HDMI-A-2] generating connector hotplug event
<7> [102.828844] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:259:HDMI-A-3] generating connector hotplug event
<7> [102.829039] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY E bus for card0-DP-2
<7> [102.829538] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event
<7> [102.829746] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:271:HDMI-A-4] generating connector hotplug event
<6> [102.829774] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
<7> [102.830961] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 6 outputs detected
<6> [102.839575] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [102.841943] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
<7> [102.842768] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [102.843445] [drm:drm_client_modeset_probe]
<7> [102.843477] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:HDMI-A-1]
<7> [102.843496] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:236:HDMI-A-1]
<7> [102.843518] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
<7> [102.843686] i915 device info: pciid=0x4682 rev=0x0c platform=ALDERLAKE_S (subplatform=0x0) gen=12
<7> [102.843690] i915 device info: graphics version: 12
<7> [102.843693] i915 device info: media version: 12
<7> [102.843695] i915 device info: display version: 12
<7> [102.843697] i915 device info: graphics stepping: D0
<7> [102.843699] i915 device info: media stepping: D0
<7> [102.843701] i915 device info: display stepping: C0
<7> [102.843704] i915 device info: base die stepping: **
<7> [102.843705] i915 device info: gt: 0
<7> [102.843706] i915 device info: memory-regions: 0x21
<7> [102.843708] i915 device info: page-sizes: 0x211000
<7> [102.843709] i915 device info: platform: ALDERLAKE_S
<7> [102.843710] i915 device info: ppgtt-size: 48
<7> [102.843711] i915 device info: ppgtt-type: 2
<7> [102.843713] i915 device info: dma_mask_size: 39
<7> [102.843714] i915 device info: is_mobile: no
<7> [102.843715] i915 device info: is_lp: no
<7> [102.843655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [102.843716] i915 device info: require_force_probe: no
<7> [102.843718] i915 device info: is_dgfx: no
<7> [102.843719] i915 device info: has_64bit_reloc: yes
<7> [102.843720] i915 device info: has_64k_pages: no
<7> [102.843721] i915 device info: gpu_reset_clobbers_display: no
<7> [102.843722] i915 device info: has_reset_engine: yes
<7> [102.843723] i915 device info: has_3d_pipeline: yes
<7> [102.843724] i915 device info: has_4tile: no
<7> [102.843725] i915 device info: has_flat_ccs: no
<7> [102.843726] i915 device info: has_global_mocs: yes
<7> [102.843727] i915 device info: has_gmd_id: no
<7> [102.843728] i915 device info: has_gt_uc: yes
<7> [102.843729] i915 device info: has_heci_pxp: no
<7> [102.843729] i915 device info: has_heci_gscfi: no
<7> [102.843730] i915 device info: has_guc_deprivilege: no
<7> [102.843731] i915 device info: has_l3_ccs_read: no
<7> [102.843732] i915 device info: has_l3_dpf: no
<7> [102.843733] i915 device info: has_llc: yes
<7> [102.843734] i915 device info: has_logical_ring_contexts: yes
<7> [102.843735] i915 device info: has_logical_ring_elsq: yes
<7> [102.843736] i915 device info: has_media_ratio_mode: no
<7> [102.843737] i915 device info: has_mslice_steering: no
<7> [102.843738] i915 device info: has_oa_bpc_reporting: no
<7> [102.843739] i915 device info: has_oa_slice_contrib_limits: no
<7> [102.843740] i915 device info: has_oam: no
<7> [102.843741] i915 device info: has_one_eu_per_fuse_bit: no
<7> [102.843742] i915 device info: has_pxp: yes
<7> [102.843743] i915 device info: has_rc6: yes
<7> [102.843744] i915 device info: has_rc6p: no
<7> [102.843745] i915 device info: has_rps: yes
<7> [102.843746] i915 device info: has_runtime_pm: yes
<7> [102.843747] i915 device info: has_snoop: no
<7> [102.843748] i915 device info: has_coherent_ggtt: no
<7> [102.843749] i915 device info: tuning_thread_rr_after_dep: no
<7> [102.843750] i915 device info: unfenced_needs_alignment: no
<7> [102.843751] i915 device info: hws_needs_physical: no
<7> [102.843752] i915 device info: has_pooled_eu: no
<7> [102.843753] i915 device info: cursor_needs_physical: no
<7> [102.843754] i915 device info: has_cdclk_crawl: no
<7> [102.843755] i915 device info: has_cdclk_squash: no
<7> [102.843756] i915 device info: has_ddi: yes
<7> [102.843757] i915 device info: has_dp_mst: yes
<7> [102.843759] i915 device info: has_dsb: yes
<7> [102.843759] i915 device info: has_fpga_dbg: yes
<7> [102.843760] i915 device info: has_gmch: no
<7> [102.843761] i915 device info: has_hotplug: yes
<7> [102.843762] i915 device info: has_hti: yes
<7> [102.843763] i915 device info: has_ipc: yes
<7> [102.843764] i915 device info: has_overlay: no
<7> [102.843765] i915 device info: has_psr: yes
<7> [102.843766] i915 device info: has_psr_hw_tracking: no
<7> [102.843767] i915 device info: overlay_needs_physical: no
<7> [102.843768] i915 device info: supports_tv: no
<7> [102.843769] i915 device info: has_hdcp: yes
<7> [102.843770] i915 device info: has_dmc: yes
<7> [102.843771] i915 device info: has_dsc: yes
<7> [102.843772] i915 device info: rawclk rate: 19200 kHz
<7> [102.843773] i915 device info: iommu: enabled
<7> [102.843775] i915 device info: available engines: 40403
<7> [102.843789] i915 device info: slice total: 1, mask=0001
<7> [102.843791] i915 device info: subslice total: 2
<7> [102.843792] i915 device info: slice0: 2 subslices, mask=00000003
<7> [102.843794] i915 device info: EU total: 24
<7> [102.843795] i915 device info: EU per subslice: 12
<7> [102.843796] i915 device info: has slice power gating: yes
<7> [102.843798] i915 device info: has subslice power gating: no
<7> [102.843799] i915 device info: has EU power gating: no
<6> [102.843800] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6> [102.843802] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6> [102.843803] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<7> [102.843795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [102.843929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [102.844061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [102.844185] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [102.844345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [102.845580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [102.846773] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)
<7> [102.846942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [102.847130] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:HDMI-A-1] status updated from unknown to disconnected
<7> [102.847156] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:HDMI-A-1] disconnected
<7> [102.847227] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1]
<7> [102.847252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1]
<7> [102.847426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [102.848189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [102.848395] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] status updated from unknown to disconnected
<7> [102.848426] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected
<7> [102.848441] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:HDMI-A-2]
<7> [102.848456] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:255:HDMI-A-2]
<7> [102.848616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [102.849398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [102.849536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:HDMI-A-2] status updated from unknown to disconnected
<7> [102.849564] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:HDMI-A-2] disconnected
<7> [102.849579] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:259:HDMI-A-3]
<7> [102.849590] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:259:HDMI-A-3]
<7> [102.849749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<6> [102.850084] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
<7> [102.850587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [102.850759] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:259:HDMI-A-3] status updated from unknown to disconnected
<7> [102.850781] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:259:HDMI-A-3] disconnected
<7> [102.850798] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2]
<7> [102.850808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]
<7> [102.850939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [102.851775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [102.851959] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected
<7> [102.851981] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected
<7> [102.852000] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:271:HDMI-A-4]
<7> [102.852014] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:271:HDMI-A-4]
<7> [102.852160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [102.852967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [102.853191] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:271:HDMI-A-4] status updated from unknown to disconnected
<7> [102.853213] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:271:HDMI-A-4] disconnected
<7> [102.853241] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [102.853246] [drm:drm_client_modeset_probe] connector 236 enabled? no
<7> [102.853250] [drm:drm_client_modeset_probe] connector 246 enabled? no
<7> [102.853253] [drm:drm_client_modeset_probe] connector 255 enabled? no
<7> [102.853256] [drm:drm_client_modeset_probe] connector 259 enabled? no
<7> [102.853259] [drm:drm_client_modeset_probe] connector 263 enabled? no
<7> [102.853262] [drm:drm_client_modeset_probe] connector 271 enabled? no
<7> [102.853293] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [102.853304] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [102.853451] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [102.853469] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [102.853944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [102.854122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [102.854836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [102.856078] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.856277] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [102.856465] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.856643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [102.856784] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.856917] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [102.857048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.857186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [102.857332] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.857466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [102.857607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [102.857731] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [102.857851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [102.859077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [102.859447] [drm:drm_client_modeset_probe]
<7> [102.859532] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:HDMI-A-1]
<6> [102.859539] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
<7> [102.859551] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:236:HDMI-A-1]
<7> [102.859727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [102.859847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [102.860594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [102.861811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.861950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [102.862082] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.862209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [102.862639] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.862773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [102.862904] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.863039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [102.863170] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.863309] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [102.863425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [102.863547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [102.863772] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:HDMI-A-1] disconnected
<7> [102.863786] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1]
<7> [102.863743] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7> [102.863797] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1]
<7> [102.863938] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected
<7> [102.863950] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:HDMI-A-2]
<7> [102.863960] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:255:HDMI-A-2]
<7> [102.864098] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:HDMI-A-2] disconnected
<7> [102.864108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:259:HDMI-A-3]
<7> [102.864118] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:259:HDMI-A-3]
<7> [102.864256] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:259:HDMI-A-3] disconnected
<7> [102.864266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2]
<7> [102.864275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]
<7> [102.864400] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected
<7> [102.864410] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:271:HDMI-A-4]
<7> [102.864419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:271:HDMI-A-4]
<7> [102.864550] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:271:HDMI-A-4] disconnected
<7> [102.864559] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [102.864562] [drm:drm_client_modeset_probe] connector 236 enabled? no
<7> [102.864565] [drm:drm_client_modeset_probe] connector 246 enabled? no
<7> [102.864568] [drm:drm_client_modeset_probe] connector 255 enabled? no
<7> [102.864571] [drm:drm_client_modeset_probe] connector 259 enabled? no
<7> [102.864574] [drm:drm_client_modeset_probe] connector 263 enabled? no
<7> [102.864576] [drm:drm_client_modeset_probe] connector 271 enabled? no
<7> [102.864608] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [102.864618] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [102.864634] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [102.864652] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [102.864705] [drm:drm_client_modeset_probe]
<7> [102.864740] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:HDMI-A-1]
<7> [102.864754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:236:HDMI-A-1]
<7> [102.864943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:HDMI-A-1] disconnected
<7> [102.864958] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1]
<7> [102.864971] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:246:DP-1]
<7> [102.865160] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:246:DP-1] disconnected
<7> [102.865174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:HDMI-A-2]
<7> [102.865188] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:255:HDMI-A-2]
<7> [102.865364] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:HDMI-A-2] disconnected
<7> [102.865375] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:259:HDMI-A-3]
<7> [102.865384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:259:HDMI-A-3]
<7> [102.865522] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:259:HDMI-A-3] disconnected
<7> [102.865532] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2]
<7> [102.865541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2]
<7> [102.865670] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected
<7> [102.865679] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:271:HDMI-A-4]
<7> [102.865688] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:271:HDMI-A-4]
<7> [102.865815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:271:HDMI-A-4] disconnected
<7> [102.865825] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [102.865827] [drm:drm_client_modeset_probe] connector 236 enabled? no
<7> [102.865829] [drm:drm_client_modeset_probe] connector 246 enabled? no
<7> [102.865831] [drm:drm_client_modeset_probe] connector 255 enabled? no
<7> [102.865833] [drm:drm_client_modeset_probe] connector 259 enabled? no
<7> [102.865835] [drm:drm_client_modeset_probe] connector 263 enabled? no
<7> [102.865836] [drm:drm_client_modeset_probe] connector 271 enabled? no
<7> [102.865856] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [102.865863] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [102.865873] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [102.865884] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [102.868857] [IGT] core_hotunplug: reopening DRM device for health check
<7> [102.868903] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [102.869502] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [102.871867] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [102.872021] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [102.872317] [IGT] core_hotunplug: closing health checked device instance
<7> [102.872469] [IGT] core_hotunplug: reopening render device for health check
<7> [102.872494] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [102.872871] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [102.874401] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [102.874634] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [102.874899] [IGT] core_hotunplug: closing health checked device instance
<6> [102.875023] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS
<6> [102.875852] [IGT] core_hotunplug: exiting, ret=0
Created at 2023-06-18 23:06:05