igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.4-rc6 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g17fbab44f (x86_64) (Linux: 6.4.0-rc6-linus-v6.4-rc6-g858fd168a95c+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa2d/0xd10 [i915] intel_atomic_commit+0x380/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_dmc_debugfs_status_show+0x3b/0x440 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xa9/0x2f0 ksys_read+0x64/0xe0 do_syscall_64+0x3f/0x90 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_dmc_debugfs_status_show+0x340/0x440 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xa9/0x2f0 Wakeref count: 0 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa2d/0xd10 [i915] intel_atomic_commit+0x380/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 Subtest module-reload: SUCCESS (26.078s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (26.078s)
Dmesg	<6> [146.552572] [IGT] i915_pm_rpm: executing <7> [146.559894] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [146.560276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [146.560294] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [146.560577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.560837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.560980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.561587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.561944] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [146.562018] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [146.562031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [146.562215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.562706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.563752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.564299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [146.565752] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [146.566752] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [146.567560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [146.567825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.567972] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.568114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.568735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.568939] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [146.569007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [146.569019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [146.569152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.570409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [146.570553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [146.571231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [146.571765] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [146.571772] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.571936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [146.598681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [146.598686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [146.598853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.599049] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [146.602823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [146.602839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [146.602981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.603452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.603597] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [146.604110] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [146.604124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [146.604260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.604768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.605253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.605874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [146.607193] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [146.608280] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [146.609052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [146.609260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.609436] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.609583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.610281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.610434] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [146.610931] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [146.610945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [146.611081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.612700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [146.612877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [146.613615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [146.614181] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [146.614185] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.614311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [146.641602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [146.641607] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [146.641761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.641951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [146.642352] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [146.642367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [146.642504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.643019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.643168] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [146.643194] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [146.643205] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [146.643339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.643861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.644338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.644907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [146.646060] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [146.647172] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [146.647915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [146.648091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.648238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.648381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.649027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.649230] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [146.649270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [146.649287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [146.649431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.650558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [146.650707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [146.651463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [146.651964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [146.651970] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.652148] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [146.680583] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [146.680588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [146.680724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.680922] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [157.721871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [157.728472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [157.752965] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [157.759066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [157.759653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [157.759920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.760983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.761182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [157.761211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [157.761720] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [157.761657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.762344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.762965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.763513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [157.765169] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [157.766296] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [157.767059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [157.767390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [157.767541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.767687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.768304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.768587] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [157.768608] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [157.768796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.770096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [157.770244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [157.770985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [157.771538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [157.771545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [157.771686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [157.795736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [157.795742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [157.795869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.796019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [157.796050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [157.799726] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [157.824157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [157.830450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [157.830694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.830906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.831450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.832081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [157.832238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.832392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.833005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.833176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [157.833754] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [157.835382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [157.859851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [157.864835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [157.865116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.865354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.865938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.866601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [157.866955] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.867312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.868149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.868541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [157.869293] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [157.869300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [157.872736] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [157.897536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [157.901396] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [157.901581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.902125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.902373] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [157.902398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [157.902570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.903123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.903632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.904206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [157.905510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [157.906527] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [157.907178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [157.907356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [157.907516] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.907672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.908303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.908493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [157.908643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.908857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.909360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.909953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [157.910113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.910265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.910897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.911132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [157.911818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [157.913514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [157.936997] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [157.942275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [157.942429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.944099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [157.944676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [157.945393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [157.945915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [157.945920] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [157.946071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [157.969566] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [157.969571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [157.969697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.969903] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [157.969946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [157.970124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.970632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.970848] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [157.970862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [157.971032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.971511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.972051] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.972588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [157.973750] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [157.974569] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [157.975337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [157.975505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [157.975655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.975841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.976475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.976627] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [157.976642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [157.976789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.977985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [157.978112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [157.979555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [157.980121] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [157.980125] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [157.980291] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [158.007613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [158.007618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [158.007755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [158.007975] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [158.007991] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [158.010764] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [158.113648] [IGT] i915_pm_rpm: starting subtest module-reload <7> [158.220771] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [158.226289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.226826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [158.227161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [158.227512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [158.227860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [158.228527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [158.228976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [158.229239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [158.229490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [158.229756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [158.230044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [158.230077] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [158.231392] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [158.232124] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [158.232676] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [158.233041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [158.233591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [158.233834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [158.234305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [158.234564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [158.234572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [158.234820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [158.239111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [158.239116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [158.239256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [158.259467] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [158.294679] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [158.672354] [IGT] Reloading i915 w/o display <7> [158.849867] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [158.850137] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [158.850316] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [158.850498] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [158.850861] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [158.851098] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [158.851909] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [158.852121] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [158.852324] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [158.852527] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [158.852534] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [158.852929] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [158.852968] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [158.853242] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [158.853672] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [158.853976] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [158.854237] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [158.854466] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [158.854679] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [158.858742] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [158.858975] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [158.859186] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [158.859395] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [158.859605] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [158.859868] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [158.860081] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [158.860275] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [158.860468] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [158.860658] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [158.860910] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [158.861172] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [158.861367] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [158.861561] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [158.862295] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [158.862539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [158.862830] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [158.863098] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [158.863333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [158.863566] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [158.863825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [158.864121] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [158.864349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [158.864578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [158.864865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [158.865163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [158.865389] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [158.865598] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [158.865853] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [158.866119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [158.866347] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [158.866572] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [158.866853] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [158.867144] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [158.867415] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [158.867637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [158.867899] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [158.868193] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [158.868415] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [158.868669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [158.868986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [158.869236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [158.869496] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [158.870152] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [158.870376] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [158.870615] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [158.870952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [158.871178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [158.871404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [158.871647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [158.871924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [158.872187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [158.872413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [158.872639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [158.872917] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [158.874188] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [158.874277] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [158.874774] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [158.874990] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [158.875145] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [158.875297] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [158.875447] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [158.875598] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [158.875824] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [158.875993] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [158.876148] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [158.876339] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [158.877551] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [158.879014] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [158.879346] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [158.879574] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [158.882510] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [158.882766] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [158.883014] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [158.883246] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [158.883482] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [158.883675] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [158.883941] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [158.884172] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [158.884400] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [158.884628] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [158.884912] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [158.885186] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [158.885477] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [158.885690] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [158.885948] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [158.886157] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [158.886367] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [158.886678] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [158.887242] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [158.887480] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [158.887841] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [158.888074] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [158.888350] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [158.888582] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [159.103724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.114725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.125725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.136725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.147724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.158724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.169723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.180726] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.191723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.202724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.213724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.224723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.235723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.246723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.257725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.268722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.279722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.290725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.301724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.313723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.324722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.335723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.346725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.357725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.368723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.379723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.390725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.401723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.412723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.423722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.434726] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.445724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.445916] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [159.445936] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [159.445991] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [159.446209] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [159.446409] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [159.446572] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [159.447009] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [159.447185] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [159.447356] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [159.447628] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [159.447842] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [159.447997] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [159.448219] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [159.448382] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [159.448747] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [159.448942] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [159.449117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [159.449277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [159.449436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [159.449595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [159.449779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [159.449955] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [159.450113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [159.450278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [159.450437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [159.450596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [159.450783] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [159.450977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [159.451137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [159.451301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [159.451461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [159.451614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [159.451818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [159.452014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [159.452175] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [159.452340] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [159.452503] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [159.452669] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [159.452911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [159.453094] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [159.453261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [159.453415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [159.453568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [159.453728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [159.453924] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [159.454091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [159.454249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [159.454402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [159.454556] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [159.454726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [159.454923] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [159.455106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [159.455272] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [159.455466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [159.455628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [159.455840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [159.456043] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [159.456203] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [159.456357] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [159.456507] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [159.456693] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [159.456912] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [159.457108] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [159.457277] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [159.458305] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [159.458475] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [159.458642] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [159.469527] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [159.469846] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [159.470002] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [159.470160] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [159.470320] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [159.470486] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [159.471029] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [159.471179] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [159.471325] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [159.471469] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [159.473966] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [159.474865] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [159.475145] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [159.475664] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [159.475967] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [159.476007] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [159.477541] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [159.491524] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [159.493468] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [159.494201] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [159.494725] [drm:drm_client_modeset_probe] <7> [159.494667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [159.494889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [159.495037] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [159.495088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [159.495121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [159.495316] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [159.495354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [159.495603] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [159.495626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [159.495646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [159.495931] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [159.496126] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [159.496129] i915 device info: graphics version: 9 <7> [159.496131] i915 device info: media version: 9 <7> [159.496133] i915 device info: display version: 9 <7> [159.496134] i915 device info: graphics stepping: F0 <7> [159.496136] i915 device info: media stepping: F0 <7> [159.496137] i915 device info: display stepping: C0 <7> [159.496139] i915 device info: base die stepping: <7> [159.496140] i915 device info: gt: 2 <7> [159.496142] i915 device info: memory-regions: 0x21 <7> [159.496143] i915 device info: page-sizes: 0x11000 <7> [159.496145] i915 device info: platform: KABYLAKE <7> [159.496146] i915 device info: ppgtt-size: 48 <7> [159.496147] i915 device info: ppgtt-type: 2 <7> [159.496149] i915 device info: dma_mask_size: 39 <7> [159.496150] i915 device info: is_mobile: no <7> [159.496152] i915 device info: is_lp: no <7> [159.496153] i915 device info: require_force_probe: no <7> [159.496155] i915 device info: is_dgfx: no <7> [159.496156] i915 device info: has_64bit_reloc: yes <7> [159.496157] i915 device info: has_64k_pages: no <7> [159.496159] i915 device info: gpu_reset_clobbers_display: no <7> [159.496160] i915 device info: has_reset_engine: yes <7> [159.496162] i915 device info: has_3d_pipeline: yes <7> [159.496163] i915 device info: has_4tile: no <7> [159.496164] i915 device info: has_flat_ccs: no <7> [159.496166] i915 device info: has_global_mocs: no <7> [159.496167] i915 device info: has_gmd_id: no <7> [159.496168] i915 device info: has_gt_uc: yes <7> [159.496170] i915 device info: has_heci_pxp: no <7> [159.496171] i915 device info: has_heci_gscfi: no <7> [159.496173] i915 device info: has_guc_deprivilege: no <7> [159.496174] i915 device info: has_l3_ccs_read: no <7> [159.496175] i915 device info: has_l3_dpf: no <7> [159.496177] i915 device info: has_llc: yes <7> [159.496178] i915 device info: has_logical_ring_contexts: yes <7> [159.496180] i915 device info: has_logical_ring_elsq: no <7> [159.496181] i915 device info: has_media_ratio_mode: no <7> [159.496182] i915 device info: has_mslice_steering: no <7> [159.496184] i915 device info: has_oa_bpc_reporting: no <7> [159.496185] i915 device info: has_oa_slice_contrib_limits: no <7> [159.496186] i915 device info: has_oam: no <7> [159.496188] i915 device info: has_one_eu_per_fuse_bit: no <7> [159.496189] i915 device info: has_pxp: no <7> [159.496190] i915 device info: has_rc6: yes <7> [159.496192] i915 device info: has_rc6p: no <7> [159.496193] i915 device info: has_rps: yes <7> [159.496194] i915 device info: has_runtime_pm: yes <7> [159.496196] i915 device info: has_snoop: no <7> [159.496197] i915 device info: has_coherent_ggtt: yes <7> [159.496199] i915 device info: tuning_thread_rr_after_dep: no <7> [159.496200] i915 device info: unfenced_needs_alignment: no <7> [159.496201] i915 device info: hws_needs_physical: no <7> [159.496203] i915 device info: has_pooled_eu: no <7> [159.496204] i915 device info: cursor_needs_physical: no <7> [159.496205] i915 device info: has_cdclk_crawl: no <7> [159.496207] i915 device info: has_cdclk_squash: no <7> [159.496208] i915 device info: has_ddi: yes <7> [159.496210] i915 device info: has_dp_mst: yes <7> [159.496211] i915 device info: has_dsb: no <7> [159.496212] i915 device info: has_fpga_dbg: yes <7> [159.496214] i915 device info: has_gmch: no <7> [159.496215] i915 device info: has_hotplug: yes <7> [159.496216] i915 device info: has_hti: no <7> [159.496218] i915 device info: has_ipc: yes <7> [159.496219] i915 device info: has_overlay: no <7> [159.496220] i915 device info: has_psr: yes <7> [159.496222] i915 device info: has_psr_hw_tracking: yes <7> [159.496223] i915 device info: overlay_needs_physical: no <7> [159.496225] i915 device info: supports_tv: no <7> [159.496226] i915 device info: has_hdcp: yes <7> [159.496227] i915 device info: has_dmc: yes <7> [159.496229] i915 device info: has_dsc: no <7> [159.496230] i915 device info: rawclk rate: 24000 kHz <7> [159.496232] i915 device info: iommu: enabled <7> [159.496233] i915 device info: available engines: 40403 <7> [159.496235] i915 device info: slice total: 1, mask=0001 <7> [159.496237] i915 device info: subslice total: 3 <7> [159.496238] i915 device info: slice0: 3 subslices, mask=00000007 <7> [159.496240] i915 device info: slice1: 0 subslices, mask=00000000 <7> [159.496242] i915 device info: slice2: 0 subslices, mask=00000000 <7> [159.496243] i915 device info: EU total: 24 <7> [159.496244] i915 device info: EU per subslice: 8 <7> [159.496246] i915 device info: has slice power gating: no <7> [159.496247] i915 device info: has subslice power gating: no <7> [159.496249] i915 device info: has EU power gating: yes <6> [159.496250] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [159.496252] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [159.496254] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [159.496259] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [159.496287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [159.496306] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [159.496325] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [159.496546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [159.496572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [159.496590] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [159.496599] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [159.496603] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [159.496607] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [159.496704] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [159.496735] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [159.496764] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [159.496791] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [159.498575] [drm:drm_client_modeset_probe] <7> [159.498856] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [159.498907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [159.499160] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [159.499181] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [159.499199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [159.499381] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [159.499400] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [159.499417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [159.499595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [159.499614] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [159.499622] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [159.499626] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [159.499630] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [159.499760] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [159.499778] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [159.499806] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [159.499834] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [159.502600] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [159.652875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [159.653280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [159.653465] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.653639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.654298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [170.541104] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [170.547489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [170.572540] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [170.579555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [170.579928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [170.579976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [170.580301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [170.580284] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [170.580338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [170.580657] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [170.581188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [170.586568] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [170.782833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [170.790979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [170.791315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [170.791353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [170.791660] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [170.791694] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [170.792042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [170.792397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [170.793368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [170.793729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [170.794375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [170.795140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [170.795645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [170.796041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [170.796424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [170.796845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [170.827571] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [170.878368] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [171.242367] [IGT] Reloading i915 as normal <7> [171.386447] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [171.386684] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [171.386901] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [171.387090] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [171.387409] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [171.387571] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [171.388237] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [171.388387] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [171.388533] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [171.388676] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [171.388680] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [171.388917] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [171.388931] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [171.389094] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [171.389393] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [171.389567] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [171.389744] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [171.389902] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [171.390052] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [171.394108] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [171.394279] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [171.394441] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [171.394632] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [171.394803] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [171.394958] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [171.395133] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [171.395289] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [171.395443] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [171.395581] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [171.395728] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [171.395877] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [171.396013] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [171.396149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [171.396671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [171.396879] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [171.397059] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [171.397225] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [171.397391] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [171.397558] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [171.397755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [171.397925] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [171.398090] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [171.398290] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [171.398454] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [171.398618] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [171.398787] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [171.398960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [171.399155] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [171.399354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [171.399517] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [171.399680] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [171.399851] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [171.400023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [171.400184] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [171.400345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [171.400505] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [171.400665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [171.400835] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [171.401014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [171.401208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [171.401383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [171.401545] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [171.402071] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [171.402271] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [171.402448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [171.402650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.402865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [171.403073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [171.403278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [171.403469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [171.403630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [171.403803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [171.403973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [171.404164] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [171.405129] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [171.405172] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [171.405606] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [171.405799] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [171.405998] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [171.406154] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [171.406305] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [171.406456] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [171.406606] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [171.406823] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [171.407035] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [171.407221] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [171.408305] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [171.409168] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [171.409390] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [171.409560] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [171.414363] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [171.414535] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [171.414709] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [171.414927] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [171.415145] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [171.415308] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [171.415467] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [171.415665] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [171.415908] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [171.416120] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [171.416282] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [171.416480] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [171.416697] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [171.416895] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [171.417085] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [171.417247] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [171.417445] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [171.417660] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [171.418042] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [171.418214] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [171.418440] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [171.418605] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [171.418864] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [171.419032] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [171.631722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.642722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.653723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.664723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.675721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.686721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.697722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.708723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.719722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.730722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.741724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.752720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.763721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.774721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.785723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.796721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.807721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.818721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.829723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.840720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.851721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.862720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.873723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.884721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.895720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.906720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.917723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.928723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.939721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.950721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.961723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.972721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [171.972914] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [171.972935] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [171.972991] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [171.973208] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [171.973408] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [171.973571] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [171.974034] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [171.974201] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [171.974365] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [171.974639] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [171.974811] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [171.975035] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [171.975255] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [171.975418] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [171.975839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [171.976057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [171.976231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [171.976392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [171.976552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [171.976719] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [171.976950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [171.977109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [171.977274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [171.977432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [171.977591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [171.977779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [171.977989] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [171.978168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [171.978328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [171.978491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [171.978651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [171.978824] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [171.979055] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [171.979208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [171.979370] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [171.979536] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [171.979699] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [171.979894] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [171.980159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [171.980326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [171.980491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [171.980645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [171.980805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [171.981037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [171.981196] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [171.981360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [171.981516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [171.981669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [171.981839] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [171.982109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [171.982265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [171.982419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [171.982572] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [171.982835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [171.983015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [171.983176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [171.983340] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [171.983517] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [171.983671] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [171.983883] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [171.984135] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [171.984283] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [171.984442] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [171.984611] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [171.985675] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [171.985871] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [171.986040] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [171.995878] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [171.996124] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [171.996277] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [171.996427] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [171.996577] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [171.996791] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [171.997318] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [171.997475] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [171.997631] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [171.997786] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [172.000072] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [172.001314] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [172.001806] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [172.002652] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [172.003147] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [172.003228] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [172.005432] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [172.017774] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [172.019704] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [172.020254] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [172.021034] [drm:drm_client_modeset_probe] <7> [172.020984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [172.021274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [172.021383] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [172.021436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [172.021511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [172.021779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [172.022132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [172.022539] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [172.022538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [172.022781] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [172.022786] i915 device info: graphics version: 9 <7> [172.022789] i915 device info: media version: 9 <7> [172.022791] i915 device info: display version: 9 <7> [172.022794] i915 device info: graphics stepping: F0 <7> [172.022797] i915 device info: media stepping: F0 <7> [172.022799] i915 device info: display stepping: C0 <7> [172.022802] i915 device info: base die stepping: <7> [172.022804] i915 device info: gt: 2 <7> [172.022806] i915 device info: memory-regions: 0x21 <7> [172.022809] i915 device info: page-sizes: 0x11000 <7> [172.022812] i915 device info: platform: KABYLAKE <7> [172.022815] i915 device info: ppgtt-size: 48 <7> [172.022817] i915 device info: ppgtt-type: 2 <7> [172.022820] i915 device info: dma_mask_size: 39 <7> [172.022823] i915 device info: is_mobile: no <7> [172.022825] i915 device info: is_lp: no <7> [172.022828] i915 device info: require_force_probe: no <7> [172.022830] i915 device info: is_dgfx: no <7> [172.022833] i915 device info: has_64bit_reloc: yes <7> [172.022835] i915 device info: has_64k_pages: no <7> [172.022838] i915 device info: gpu_reset_clobbers_display: no <7> [172.022840] i915 device info: has_reset_engine: yes <7> [172.022843] i915 device info: has_3d_pipeline: yes <7> [172.022846] i915 device info: has_4tile: no <7> [172.022848] i915 device info: has_flat_ccs: no <7> [172.022851] i915 device info: has_global_mocs: no <7> [172.022853] i915 device info: has_gmd_id: no <7> [172.022856] i915 device info: has_gt_uc: yes <7> [172.022858] i915 device info: has_heci_pxp: no <7> [172.022861] i915 device info: has_heci_gscfi: no <7> [172.022863] i915 device info: has_guc_deprivilege: no <7> [172.022865] i915 device info: has_l3_ccs_read: no <7> [172.022868] i915 device info: has_l3_dpf: no <7> [172.022870] i915 device info: has_llc: yes <7> [172.022873] i915 device info: has_logical_ring_contexts: yes <7> [172.022876] i915 device info: has_logical_ring_elsq: no <7> [172.022878] i915 device info: has_media_ratio_mode: no <7> [172.022881] i915 device info: has_mslice_steering: no <7> [172.022883] i915 device info: has_oa_bpc_reporting: no <7> [172.022886] i915 device info: has_oa_slice_contrib_limits: no <7> [172.022888] i915 device info: has_oam: no <7> [172.022891] i915 device info: has_one_eu_per_fuse_bit: no <7> [172.022893] i915 device info: has_pxp: no <7> [172.022895] i915 device info: has_rc6: yes <7> [172.022897] i915 device info: has_rc6p: no <7> [172.022900] i915 device info: has_rps: yes <7> [172.022903] i915 device info: has_runtime_pm: yes <7> [172.022905] i915 device info: has_snoop: no <7> [172.022908] i915 device info: has_coherent_ggtt: yes <7> [172.022910] i915 device info: tuning_thread_rr_after_dep: no <7> [172.022913] i915 device info: unfenced_needs_alignment: no <7> [172.022915] i915 device info: hws_needs_physical: no <7> [172.022918] i915 device info: has_pooled_eu: no <7> [172.022920] i915 device info: cursor_needs_physical: no <7> [172.022922] i915 device info: has_cdclk_crawl: no <7> [172.022925] i915 device info: has_cdclk_squash: no <7> [172.022927] i915 device info: has_ddi: yes <7> [172.022930] i915 device info: has_dp_mst: yes <7> [172.022932] i915 device info: has_dsb: no <7> [172.022935] i915 device info: has_fpga_dbg: yes <7> [172.022937] i915 device info: has_gmch: no <7> [172.022940] i915 device info: has_hotplug: yes <7> [172.022942] i915 device info: has_hti: no <7> [172.022945] i915 device info: has_ipc: yes <7> [172.022947] i915 device info: has_overlay: no <7> [172.022949] i915 device info: has_psr: yes <7> [172.022952] i915 device info: has_psr_hw_tracking: yes <7> [172.022955] i915 device info: overlay_needs_physical: no <7> [172.022957] i915 device info: supports_tv: no <7> [172.022843] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [172.022960] i915 device info: has_hdcp: yes <7> [172.022962] i915 device info: has_dmc: yes <7> [172.022964] i915 device info: has_dsc: no <7> [172.022966] i915 device info: rawclk rate: 24000 kHz <7> [172.022969] i915 device info: iommu: enabled <7> [172.022971] i915 device info: available engines: 40403 <7> [172.022973] i915 device info: slice total: 1, mask=0001 <7> [172.022976] i915 device info: subslice total: 3 <7> [172.022978] i915 device info: slice0: 3 subslices, mask=00000007 <7> [172.022981] i915 device info: slice1: 0 subslices, mask=00000000 <7> [172.022984] i915 device info: slice2: 0 subslices, mask=00000000 <7> [172.022986] i915 device info: EU total: 24 <7> [172.022988] i915 device info: EU per subslice: 8 <7> [172.022990] i915 device info: has slice power gating: no <7> [172.022993] i915 device info: has subslice power gating: no <7> [172.022995] i915 device info: has EU power gating: yes <6> [172.022997] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [172.023000] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [172.023002] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [172.023093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [172.023805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.024475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [172.024766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [172.024791] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [172.024811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [172.025103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.025708] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.026327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [172.026913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [172.028681] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [172.029892] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [172.030441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [172.030741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [172.030994] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [172.031225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [172.031943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.032198] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [172.032228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [172.032274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [172.032293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [172.032522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.034506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.034722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [172.035521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.036123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.036130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [172.036343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [172.068167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.068190] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [172.068455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.068696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [172.068763] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [172.068802] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [172.068818] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [172.068823] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [172.068827] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [172.068994] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [172.069018] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [172.069047] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [172.069076] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [172.070118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.070360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.070995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [172.071675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [172.071952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [172.072247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [172.072983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.073465] [drm:drm_client_modeset_probe] <7> [172.073744] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [172.073795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [172.074121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.074881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.075111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [172.075134] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [172.075152] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [172.075349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.075948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.076543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [172.077127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [172.078766] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [172.079143] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [172.079443] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [172.080128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [172.080514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [172.080783] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [172.080936] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [172.081549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.081702] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [172.081750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [172.081775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [172.081910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.083253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.083385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [172.084108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.084629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.084634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [172.084802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [172.113853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.113857] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [172.113989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.114140] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [172.114154] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [172.114160] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [172.114163] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [172.114165] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [172.114241] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [172.114253] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [172.114271] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [172.114276] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [172.114294] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [172.114343] [drm:drm_client_modeset_probe] <7> [172.114295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [172.114610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.115362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.115521] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [172.115542] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [172.115560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [172.115817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.116296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.116454] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [172.116468] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [172.116479] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [172.116631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.117152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.117661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [172.118246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [172.119389] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [172.120462] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [172.121267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [172.121442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [172.121593] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [172.121771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [172.122393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.122574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [172.122595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [172.122612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [172.122807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.124397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.124561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [172.125306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.125845] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.125851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [172.126021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [172.149540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.149545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [172.149673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.149839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [172.149873] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [172.149876] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [172.149879] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [172.149881] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [172.149900] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [172.149908] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [172.150045] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [172.150059] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [172.150116] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [172.150139] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [172.150294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.150820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.151335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [172.151918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [172.153416] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [172.154376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [172.155144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [172.155407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [172.155557] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [172.155702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [172.156340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.156504] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [172.156568] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [172.156580] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [172.156723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.158240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.158379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [172.159161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.159625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.159629] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [172.159768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [172.182702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.182707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [172.182847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.183090] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [172.185463] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [172.185479] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [172.185619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.186133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.186295] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [172.186875] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [172.186890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [172.187027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.187503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.188031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [172.188591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [172.189743] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [172.190741] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [172.191353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [172.191520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [172.191669] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [172.191895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [172.192490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.192640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [172.193067] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [172.193080] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [172.193239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.194431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.194591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [172.195278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.195832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.195837] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [172.196003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [172.218986] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.218991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [172.219121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.219270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [172.219579] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [172.219592] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [172.219768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.220343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.220528] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [172.220554] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [172.220566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [172.220700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.221217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.221707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [172.222292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [172.223432] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [172.224176] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [172.224908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [172.225081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [172.225226] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [172.225368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [172.225989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.226207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [172.226234] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [172.226245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [172.226377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.227116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.227243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [172.228587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [172.229112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.229118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [172.229295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [172.252278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [172.252283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [172.252413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [172.252561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [183.295180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.303339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.327846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.334543] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.335248] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.335802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.336237] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [183.337039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.337754] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.338345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.338779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.339561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.340416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.340840] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.341092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.341818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.342111] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.342757] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [183.342760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.346729] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.371383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.375655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.375882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.376408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.376956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.377500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.379170] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.380278] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.381046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.381324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.381482] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.381638] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.382260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.382434] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.382455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.382599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.384047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.384179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.385029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.385493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.385498] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.385626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.412462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.412467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.412609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.412925] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.413060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.413219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.413689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.414264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.414421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.414564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.415168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.415353] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.415905] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [183.418194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.442594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.447151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.447331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.447484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.447952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.448545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.448754] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.448907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.449512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.449683] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.449834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.453767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.478197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.482802] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.482984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.483499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.483685] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.483721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.483885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.484394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.484937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.485471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.486754] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.487750] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.488545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.488758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.488940] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.489117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.489754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.489943] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.489963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.490129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.491290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.491448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.492200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.492678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.492683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.492830] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.516352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.516356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.516484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.516630] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.516650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.516860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.517366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.517530] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.517544] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.517677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.518231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.518728] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.519294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.520387] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.521454] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.522242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.522412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.522561] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.522707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.523345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.523526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.523541] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.523674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.524839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.524965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.525658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.526196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.526200] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.526324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.552001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.552006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.552134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.552284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.552300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.555174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.763823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.768877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.769465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.769743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.770115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.771091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.771731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.772123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [183.772405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [183.772688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [183.772981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [183.773315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.773887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.775111] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.776017] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.776599] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.776629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.777193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.777425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.777869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.778128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.778136] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.778357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.782622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.782627] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.782778] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.799727] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [183.833278] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [184.192415] [IGT] i915_pm_rpm: exiting, ret=0

<6> [146.552572] [IGT] i915_pm_rpm: executing

<7> [146.559894] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [146.560276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [146.560294] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [146.560577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.560837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.560980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.561587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.561944] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [146.562018] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [146.562031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [146.562215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.562706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.563752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.564299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [146.565752] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [146.566752] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [146.567560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [146.567825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.567972] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.568114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.568735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.568939] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [146.569007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [146.569019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [146.569152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.570409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [146.570553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [146.571231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [146.571765] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [146.571772] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.571936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [146.598681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [146.598686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [146.598853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.599049] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [146.602823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [146.602839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [146.602981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.603452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.603597] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [146.604110] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [146.604124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [146.604260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.604768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.605253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.605874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [146.607193] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [146.608280] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [146.609052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [146.609260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.609436] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.609583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.610281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.610434] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [146.610931] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [146.610945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [146.611081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.612700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [146.612877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [146.613615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [146.614181] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [146.614185] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.614311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [146.641602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [146.641607] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [146.641761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.641951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [146.642352] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [146.642367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [146.642504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.643019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.643168] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [146.643194] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [146.643205] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [146.643339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.643861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.644338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.644907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [146.646060] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [146.647172] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [146.647915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [146.648091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.648238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.648381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.649027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.649230] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [146.649270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [146.649287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [146.649431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.650558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [146.650707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [146.651463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [146.651964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [146.651970] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.652148] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [146.680583] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [146.680588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [146.680724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.680922] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [157.721871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [157.728472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [157.752965] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [157.759066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [157.759653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [157.759920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.760983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.761182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [157.761211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [157.761720] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [157.761657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.762344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.762965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.763513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [157.765169] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [157.766296] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [157.767059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [157.767390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [157.767541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.767687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.768304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.768587] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [157.768608] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [157.768796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.770096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [157.770244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [157.770985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [157.771538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [157.771545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [157.771686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [157.795736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [157.795742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [157.795869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.796019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [157.796050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [157.799726] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [157.824157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [157.830450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [157.830694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.830906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.831450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.832081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [157.832238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.832392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.833005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.833176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [157.833754] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [157.835382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [157.859851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [157.864835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [157.865116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.865354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.865938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.866601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [157.866955] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.867312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.868149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.868541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [157.869293] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [157.869300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [157.872736] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [157.897536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [157.901396] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [157.901581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.902125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.902373] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [157.902398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [157.902570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.903123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.903632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.904206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [157.905510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [157.906527] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [157.907178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [157.907356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [157.907516] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.907672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.908303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.908493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [157.908643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.908857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.909360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.909953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [157.910113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.910265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.910897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.911132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [157.911818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [157.913514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [157.936997] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [157.942275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [157.942429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.944099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [157.944676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [157.945393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [157.945915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [157.945920] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [157.946071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [157.969566] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [157.969571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [157.969697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.969903] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [157.969946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [157.970124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.970632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.970848] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [157.970862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [157.971032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.971511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.972051] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.972588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [157.973750] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [157.974569] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [157.975337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [157.975505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [157.975655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.975841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.976475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.976627] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [157.976642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [157.976789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.977985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [157.978112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [157.979555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [157.980121] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [157.980125] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [157.980291] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [158.007613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [158.007618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [158.007755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [158.007975] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [158.007991] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [158.010764] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [158.113648] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [158.220771] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [158.226289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.226826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [158.227161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [158.227512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [158.227860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [158.228527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [158.228976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [158.229239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [158.229490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [158.229756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [158.230044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [158.230077] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [158.231392] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [158.232124] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [158.232676] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [158.233041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [158.233591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [158.233834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [158.234305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [158.234564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [158.234572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [158.234820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [158.239111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [158.239116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [158.239256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [158.259467] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [158.294679] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [158.672354] [IGT] Reloading i915 w/o display

<7> [158.849867] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [158.850137] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [158.850316] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [158.850498] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [158.850861] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [158.851098] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [158.851909] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [158.852121] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [158.852324] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [158.852527] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [158.852534] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [158.852929] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [158.852968] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [158.853242] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [158.853672] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [158.853976] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [158.854237] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [158.854466] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [158.854679] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [158.858742] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [158.858975] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [158.859186] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [158.859395] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [158.859605] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [158.859868] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [158.860081] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [158.860275] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [158.860468] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [158.860658] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [158.860910] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [158.861172] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [158.861367] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [158.861561] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [158.862295] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [158.862539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [158.862830] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [158.863098] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [158.863333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [158.863566] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [158.863825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [158.864121] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [158.864349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [158.864578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [158.864865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [158.865163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [158.865389] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [158.865598] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [158.865853] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [158.866119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [158.866347] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [158.866572] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [158.866853] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [158.867144] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [158.867415] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [158.867637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [158.867899] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [158.868193] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [158.868415] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [158.868669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [158.868986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [158.869236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [158.869496] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [158.870152] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [158.870376] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [158.870615] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [158.870952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [158.871178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [158.871404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [158.871647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [158.871924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [158.872187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [158.872413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [158.872639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [158.872917] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [158.874188] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [158.874277] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [158.874774] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [158.874990] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [158.875145] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [158.875297] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [158.875447] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [158.875598] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [158.875824] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [158.875993] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [158.876148] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [158.876339] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [158.877551] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [158.879014] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [158.879346] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [158.879574] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [158.882510] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [158.882766] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [158.883014] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [158.883246] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [158.883482] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [158.883675] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [158.883941] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [158.884172] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [158.884400] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [158.884628] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [158.884912] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [158.885186] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [158.885477] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [158.885690] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [158.885948] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [158.886157] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [158.886367] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [158.886678] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [158.887242] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [158.887480] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [158.887841] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [158.888074] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [158.888350] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [158.888582] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [159.103724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.114725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.125725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.136725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.147724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.158724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.169723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.180726] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.191723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.202724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.213724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.224723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.235723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.246723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.257725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.268722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.279722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.290725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.301724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.313723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.324722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.335723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.346725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.357725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.368723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.379723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.390725] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.401723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.412723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.423722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.434726] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.445724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.445916] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [159.445936] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [159.445991] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [159.446209] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [159.446409] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [159.446572] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [159.447009] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [159.447185] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [159.447356] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [159.447628] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [159.447842] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [159.447997] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [159.448219] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [159.448382] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [159.448747] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [159.448942] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [159.449117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [159.449277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [159.449436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [159.449595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [159.449779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [159.449955] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [159.450113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [159.450278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [159.450437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [159.450596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [159.450783] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [159.450977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [159.451137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [159.451301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [159.451461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [159.451614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [159.451818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [159.452014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [159.452175] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [159.452340] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [159.452503] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [159.452669] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [159.452911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [159.453094] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [159.453261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [159.453415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [159.453568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [159.453728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [159.453924] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [159.454091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [159.454249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [159.454402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [159.454556] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [159.454726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [159.454923] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [159.455106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [159.455272] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [159.455466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [159.455628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [159.455840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [159.456043] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [159.456203] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [159.456357] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [159.456507] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [159.456693] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [159.456912] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [159.457108] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [159.457277] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [159.458305] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [159.458475] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [159.458642] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [159.469527] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [159.469846] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [159.470002] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [159.470160] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [159.470320] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [159.470486] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [159.471029] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [159.471179] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [159.471325] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [159.471469] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [159.473966] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [159.474865] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [159.475145] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [159.475664] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [159.475967] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [159.476007] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [159.477541] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [159.491524] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [159.493468] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [159.494201] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [159.494725] [drm:drm_client_modeset_probe]

<7> [159.494667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [159.494889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [159.495037] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [159.495088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [159.495121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [159.495316] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [159.495354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [159.495603] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [159.495626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [159.495646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [159.495931] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [159.496126] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [159.496129] i915 device info: graphics version: 9

<7> [159.496131] i915 device info: media version: 9

<7> [159.496133] i915 device info: display version: 9

<7> [159.496134] i915 device info: graphics stepping: F0

<7> [159.496136] i915 device info: media stepping: F0

<7> [159.496137] i915 device info: display stepping: C0

<7> [159.496139] i915 device info: base die stepping: **

<7> [159.496140] i915 device info: gt: 2

<7> [159.496142] i915 device info: memory-regions: 0x21

<7> [159.496143] i915 device info: page-sizes: 0x11000

<7> [159.496145] i915 device info: platform: KABYLAKE

<7> [159.496146] i915 device info: ppgtt-size: 48

<7> [159.496147] i915 device info: ppgtt-type: 2

<7> [159.496149] i915 device info: dma_mask_size: 39

<7> [159.496150] i915 device info: is_mobile: no

<7> [159.496152] i915 device info: is_lp: no

<7> [159.496153] i915 device info: require_force_probe: no

<7> [159.496155] i915 device info: is_dgfx: no

<7> [159.496156] i915 device info: has_64bit_reloc: yes

<7> [159.496157] i915 device info: has_64k_pages: no

<7> [159.496159] i915 device info: gpu_reset_clobbers_display: no

<7> [159.496160] i915 device info: has_reset_engine: yes

<7> [159.496162] i915 device info: has_3d_pipeline: yes

<7> [159.496163] i915 device info: has_4tile: no

<7> [159.496164] i915 device info: has_flat_ccs: no

<7> [159.496166] i915 device info: has_global_mocs: no

<7> [159.496167] i915 device info: has_gmd_id: no

<7> [159.496168] i915 device info: has_gt_uc: yes

<7> [159.496170] i915 device info: has_heci_pxp: no

<7> [159.496171] i915 device info: has_heci_gscfi: no

<7> [159.496173] i915 device info: has_guc_deprivilege: no

<7> [159.496174] i915 device info: has_l3_ccs_read: no

<7> [159.496175] i915 device info: has_l3_dpf: no

<7> [159.496177] i915 device info: has_llc: yes

<7> [159.496178] i915 device info: has_logical_ring_contexts: yes

<7> [159.496180] i915 device info: has_logical_ring_elsq: no

<7> [159.496181] i915 device info: has_media_ratio_mode: no

<7> [159.496182] i915 device info: has_mslice_steering: no

<7> [159.496184] i915 device info: has_oa_bpc_reporting: no

<7> [159.496185] i915 device info: has_oa_slice_contrib_limits: no

<7> [159.496186] i915 device info: has_oam: no

<7> [159.496188] i915 device info: has_one_eu_per_fuse_bit: no

<7> [159.496189] i915 device info: has_pxp: no

<7> [159.496190] i915 device info: has_rc6: yes

<7> [159.496192] i915 device info: has_rc6p: no

<7> [159.496193] i915 device info: has_rps: yes

<7> [159.496194] i915 device info: has_runtime_pm: yes

<7> [159.496196] i915 device info: has_snoop: no

<7> [159.496197] i915 device info: has_coherent_ggtt: yes

<7> [159.496199] i915 device info: tuning_thread_rr_after_dep: no

<7> [159.496200] i915 device info: unfenced_needs_alignment: no

<7> [159.496201] i915 device info: hws_needs_physical: no

<7> [159.496203] i915 device info: has_pooled_eu: no

<7> [159.496204] i915 device info: cursor_needs_physical: no

<7> [159.496205] i915 device info: has_cdclk_crawl: no

<7> [159.496207] i915 device info: has_cdclk_squash: no

<7> [159.496208] i915 device info: has_ddi: yes

<7> [159.496210] i915 device info: has_dp_mst: yes

<7> [159.496211] i915 device info: has_dsb: no

<7> [159.496212] i915 device info: has_fpga_dbg: yes

<7> [159.496214] i915 device info: has_gmch: no

<7> [159.496215] i915 device info: has_hotplug: yes

<7> [159.496216] i915 device info: has_hti: no

<7> [159.496218] i915 device info: has_ipc: yes

<7> [159.496219] i915 device info: has_overlay: no

<7> [159.496220] i915 device info: has_psr: yes

<7> [159.496222] i915 device info: has_psr_hw_tracking: yes

<7> [159.496223] i915 device info: overlay_needs_physical: no

<7> [159.496225] i915 device info: supports_tv: no

<7> [159.496226] i915 device info: has_hdcp: yes

<7> [159.496227] i915 device info: has_dmc: yes

<7> [159.496229] i915 device info: has_dsc: no

<7> [159.496230] i915 device info: rawclk rate: 24000 kHz

<7> [159.496232] i915 device info: iommu: enabled

<7> [159.496233] i915 device info: available engines: 40403

<7> [159.496235] i915 device info: slice total: 1, mask=0001

<7> [159.496237] i915 device info: subslice total: 3

<7> [159.496238] i915 device info: slice0: 3 subslices, mask=00000007

<7> [159.496240] i915 device info: slice1: 0 subslices, mask=00000000

<7> [159.496242] i915 device info: slice2: 0 subslices, mask=00000000

<7> [159.496243] i915 device info: EU total: 24

<7> [159.496244] i915 device info: EU per subslice: 8

<7> [159.496246] i915 device info: has slice power gating: no

<7> [159.496247] i915 device info: has subslice power gating: no

<7> [159.496249] i915 device info: has EU power gating: yes

<6> [159.496250] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [159.496252] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [159.496254] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [159.496259] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [159.496287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [159.496306] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [159.496325] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [159.496546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [159.496572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [159.496590] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [159.496599] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [159.496603] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [159.496607] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [159.496704] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [159.496735] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [159.496764] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [159.496791] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [159.498575] [drm:drm_client_modeset_probe]

<7> [159.498856] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [159.498907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [159.499160] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [159.499181] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [159.499199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [159.499381] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [159.499400] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [159.499417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [159.499595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [159.499614] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [159.499622] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [159.499626] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [159.499630] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [159.499760] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [159.499778] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [159.499806] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [159.499834] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [159.502600] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [159.652875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [159.653280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [159.653465] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.653639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.654298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [170.541104] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [170.547489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [170.572540] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [170.579555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [170.579928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [170.579976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [170.580301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [170.580284] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [170.580338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [170.580657] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [170.581188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [170.586568] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [170.782833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [170.790979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [170.791315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [170.791353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [170.791660] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [170.791694] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [170.792042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [170.792397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [170.793368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [170.793729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [170.794375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [170.795140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [170.795645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [170.796041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [170.796424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [170.796845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [170.827571] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [170.878368] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [171.242367] [IGT] Reloading i915 as normal

<7> [171.386447] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [171.386684] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [171.386901] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [171.387090] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [171.387409] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [171.387571] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [171.388237] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [171.388387] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [171.388533] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [171.388676] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [171.388680] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [171.388917] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [171.388931] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [171.389094] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [171.389393] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [171.389567] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [171.389744] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [171.389902] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [171.390052] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [171.394108] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [171.394279] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [171.394441] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [171.394632] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [171.394803] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [171.394958] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [171.395133] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [171.395289] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [171.395443] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [171.395581] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [171.395728] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [171.395877] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [171.396013] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [171.396149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [171.396671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [171.396879] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [171.397059] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [171.397225] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [171.397391] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [171.397558] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [171.397755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [171.397925] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [171.398090] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [171.398290] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [171.398454] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [171.398618] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [171.398787] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [171.398960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [171.399155] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [171.399354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [171.399517] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [171.399680] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [171.399851] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [171.400023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [171.400184] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [171.400345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [171.400505] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [171.400665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [171.400835] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [171.401014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [171.401208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [171.401383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [171.401545] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [171.402071] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [171.402271] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [171.402448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [171.402650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [171.402865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [171.403073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [171.403278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [171.403469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [171.403630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [171.403803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [171.403973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [171.404164] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [171.405129] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [171.405172] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [171.405606] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [171.405799] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [171.405998] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [171.406154] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [171.406305] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [171.406456] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [171.406606] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [171.406823] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [171.407035] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [171.407221] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [171.408305] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [171.409168] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [171.409390] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [171.409560] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [171.414363] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [171.414535] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [171.414709] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [171.414927] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [171.415145] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [171.415308] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [171.415467] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [171.415665] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [171.415908] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [171.416120] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [171.416282] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [171.416480] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [171.416697] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [171.416895] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [171.417085] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [171.417247] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [171.417445] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [171.417660] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [171.418042] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [171.418214] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [171.418440] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [171.418605] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [171.418864] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [171.419032] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [171.631722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.642722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.653723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.664723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.675721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.686721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.697722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.708723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.719722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.730722] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.741724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.752720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.763721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.774721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.785723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.796721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.807721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.818721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.829723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.840720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.851721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.862720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.873723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.884721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.895720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.906720] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.917723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.928723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.939721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.950721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.961723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.972721] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [171.972914] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [171.972935] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [171.972991] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [171.973208] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [171.973408] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [171.973571] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [171.974034] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [171.974201] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [171.974365] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [171.974639] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [171.974811] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [171.975035] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [171.975255] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [171.975418] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [171.975839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [171.976057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [171.976231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [171.976392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [171.976552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [171.976719] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [171.976950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [171.977109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [171.977274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [171.977432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [171.977591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [171.977779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [171.977989] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [171.978168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [171.978328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [171.978491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [171.978651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [171.978824] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [171.979055] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [171.979208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [171.979370] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [171.979536] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [171.979699] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [171.979894] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [171.980159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [171.980326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [171.980491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [171.980645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [171.980805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [171.981037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [171.981196] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [171.981360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [171.981516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [171.981669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [171.981839] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [171.982109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [171.982265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [171.982419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [171.982572] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [171.982835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [171.983015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [171.983176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [171.983340] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [171.983517] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [171.983671] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [171.983883] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [171.984135] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [171.984283] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [171.984442] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [171.984611] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [171.985675] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [171.985871] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [171.986040] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [171.995878] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [171.996124] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [171.996277] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [171.996427] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [171.996577] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [171.996791] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [171.997318] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [171.997475] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [171.997631] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [171.997786] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [172.000072] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [172.001314] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [172.001806] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [172.002652] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [172.003147] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [172.003228] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [172.005432] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [172.017774] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [172.019704] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [172.020254] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [172.021034] [drm:drm_client_modeset_probe]

<7> [172.020984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [172.021274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [172.021383] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [172.021436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [172.021511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [172.021779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [172.022132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [172.022539] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [172.022538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [172.022781] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [172.022786] i915 device info: graphics version: 9

<7> [172.022789] i915 device info: media version: 9

<7> [172.022791] i915 device info: display version: 9

<7> [172.022794] i915 device info: graphics stepping: F0

<7> [172.022797] i915 device info: media stepping: F0

<7> [172.022799] i915 device info: display stepping: C0

<7> [172.022802] i915 device info: base die stepping: **

<7> [172.022804] i915 device info: gt: 2

<7> [172.022806] i915 device info: memory-regions: 0x21

<7> [172.022809] i915 device info: page-sizes: 0x11000

<7> [172.022812] i915 device info: platform: KABYLAKE

<7> [172.022815] i915 device info: ppgtt-size: 48

<7> [172.022817] i915 device info: ppgtt-type: 2

<7> [172.022820] i915 device info: dma_mask_size: 39

<7> [172.022823] i915 device info: is_mobile: no

<7> [172.022825] i915 device info: is_lp: no

<7> [172.022828] i915 device info: require_force_probe: no

<7> [172.022830] i915 device info: is_dgfx: no

<7> [172.022833] i915 device info: has_64bit_reloc: yes

<7> [172.022835] i915 device info: has_64k_pages: no

<7> [172.022838] i915 device info: gpu_reset_clobbers_display: no

<7> [172.022840] i915 device info: has_reset_engine: yes

<7> [172.022843] i915 device info: has_3d_pipeline: yes

<7> [172.022846] i915 device info: has_4tile: no

<7> [172.022848] i915 device info: has_flat_ccs: no

<7> [172.022851] i915 device info: has_global_mocs: no

<7> [172.022853] i915 device info: has_gmd_id: no

<7> [172.022856] i915 device info: has_gt_uc: yes

<7> [172.022858] i915 device info: has_heci_pxp: no

<7> [172.022861] i915 device info: has_heci_gscfi: no

<7> [172.022863] i915 device info: has_guc_deprivilege: no

<7> [172.022865] i915 device info: has_l3_ccs_read: no

<7> [172.022868] i915 device info: has_l3_dpf: no

<7> [172.022870] i915 device info: has_llc: yes

<7> [172.022873] i915 device info: has_logical_ring_contexts: yes

<7> [172.022876] i915 device info: has_logical_ring_elsq: no

<7> [172.022878] i915 device info: has_media_ratio_mode: no

<7> [172.022881] i915 device info: has_mslice_steering: no

<7> [172.022883] i915 device info: has_oa_bpc_reporting: no

<7> [172.022886] i915 device info: has_oa_slice_contrib_limits: no

<7> [172.022888] i915 device info: has_oam: no

<7> [172.022891] i915 device info: has_one_eu_per_fuse_bit: no

<7> [172.022893] i915 device info: has_pxp: no

<7> [172.022895] i915 device info: has_rc6: yes

<7> [172.022897] i915 device info: has_rc6p: no

<7> [172.022900] i915 device info: has_rps: yes

<7> [172.022903] i915 device info: has_runtime_pm: yes

<7> [172.022905] i915 device info: has_snoop: no

<7> [172.022908] i915 device info: has_coherent_ggtt: yes

<7> [172.022910] i915 device info: tuning_thread_rr_after_dep: no

<7> [172.022913] i915 device info: unfenced_needs_alignment: no

<7> [172.022915] i915 device info: hws_needs_physical: no

<7> [172.022918] i915 device info: has_pooled_eu: no

<7> [172.022920] i915 device info: cursor_needs_physical: no

<7> [172.022922] i915 device info: has_cdclk_crawl: no

<7> [172.022925] i915 device info: has_cdclk_squash: no

<7> [172.022927] i915 device info: has_ddi: yes

<7> [172.022930] i915 device info: has_dp_mst: yes

<7> [172.022932] i915 device info: has_dsb: no

<7> [172.022935] i915 device info: has_fpga_dbg: yes

<7> [172.022937] i915 device info: has_gmch: no

<7> [172.022940] i915 device info: has_hotplug: yes

<7> [172.022942] i915 device info: has_hti: no

<7> [172.022945] i915 device info: has_ipc: yes

<7> [172.022947] i915 device info: has_overlay: no

<7> [172.022949] i915 device info: has_psr: yes

<7> [172.022952] i915 device info: has_psr_hw_tracking: yes

<7> [172.022955] i915 device info: overlay_needs_physical: no

<7> [172.022957] i915 device info: supports_tv: no

<7> [172.022843] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [172.022960] i915 device info: has_hdcp: yes

<7> [172.022962] i915 device info: has_dmc: yes

<7> [172.022964] i915 device info: has_dsc: no

<7> [172.022966] i915 device info: rawclk rate: 24000 kHz

<7> [172.022969] i915 device info: iommu: enabled

<7> [172.022971] i915 device info: available engines: 40403

<7> [172.022973] i915 device info: slice total: 1, mask=0001

<7> [172.022976] i915 device info: subslice total: 3

<7> [172.022978] i915 device info: slice0: 3 subslices, mask=00000007

<7> [172.022981] i915 device info: slice1: 0 subslices, mask=00000000

<7> [172.022984] i915 device info: slice2: 0 subslices, mask=00000000

<7> [172.022986] i915 device info: EU total: 24

<7> [172.022988] i915 device info: EU per subslice: 8

<7> [172.022990] i915 device info: has slice power gating: no

<7> [172.022993] i915 device info: has subslice power gating: no

<7> [172.022995] i915 device info: has EU power gating: yes

<6> [172.022997] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [172.023000] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [172.023002] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [172.023093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [172.023805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.024475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [172.024766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [172.024791] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [172.024811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [172.025103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.025708] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.026327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [172.026913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [172.028681] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [172.029892] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [172.030441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [172.030741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [172.030994] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [172.031225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [172.031943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.032198] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [172.032228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [172.032274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [172.032293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [172.032522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.034506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.034722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [172.035521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.036123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.036130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [172.036343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [172.068167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.068190] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [172.068455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.068696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [172.068763] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [172.068802] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [172.068818] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [172.068823] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [172.068827] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [172.068994] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [172.069018] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [172.069047] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [172.069076] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [172.070118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.070360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.070995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [172.071675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [172.071952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [172.072247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [172.072983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.073465] [drm:drm_client_modeset_probe]

<7> [172.073744] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [172.073795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [172.074121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.074881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.075111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [172.075134] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [172.075152] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [172.075349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.075948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.076543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [172.077127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [172.078766] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [172.079143] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [172.079443] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [172.080128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [172.080514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [172.080783] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [172.080936] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [172.081549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.081702] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [172.081750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [172.081775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [172.081910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.083253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.083385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [172.084108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.084629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.084634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [172.084802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [172.113853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.113857] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [172.113989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.114140] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [172.114154] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [172.114160] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [172.114163] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [172.114165] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [172.114241] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [172.114253] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [172.114271] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [172.114276] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [172.114294] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [172.114343] [drm:drm_client_modeset_probe]

<7> [172.114295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [172.114610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.115362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.115521] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [172.115542] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [172.115560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [172.115817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.116296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.116454] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [172.116468] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [172.116479] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [172.116631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.117152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.117661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [172.118246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [172.119389] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [172.120462] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [172.121267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [172.121442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [172.121593] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [172.121771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [172.122393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.122574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [172.122595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [172.122612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [172.122807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.124397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.124561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [172.125306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.125845] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.125851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [172.126021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [172.149540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.149545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [172.149673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.149839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [172.149873] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [172.149876] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [172.149879] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [172.149881] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [172.149900] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [172.149908] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [172.150045] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [172.150059] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [172.150116] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [172.150139] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [172.150294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.150820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.151335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [172.151918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [172.153416] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [172.154376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [172.155144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [172.155407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [172.155557] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [172.155702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [172.156340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.156504] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [172.156568] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [172.156580] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [172.156723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.158240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.158379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [172.159161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.159625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.159629] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [172.159768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [172.182702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.182707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [172.182847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.183090] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [172.185463] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [172.185479] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [172.185619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.186133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.186295] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [172.186875] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [172.186890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [172.187027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.187503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.188031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [172.188591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [172.189743] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [172.190741] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [172.191353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [172.191520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [172.191669] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [172.191895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [172.192490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.192640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [172.193067] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [172.193080] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [172.193239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.194431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.194591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [172.195278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.195832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.195837] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [172.196003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [172.218986] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.218991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [172.219121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.219270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [172.219579] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [172.219592] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [172.219768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.220343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.220528] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [172.220554] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [172.220566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [172.220700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.221217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.221707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [172.222292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [172.223432] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [172.224176] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [172.224908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [172.225081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [172.225226] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [172.225368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [172.225989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.226207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [172.226234] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [172.226245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [172.226377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.227116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.227243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [172.228587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [172.229112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.229118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [172.229295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [172.252278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [172.252283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [172.252413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [172.252561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [183.295180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [183.303339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [183.327846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [183.334543] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [183.335248] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [183.335802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.336237] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [183.337039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.337754] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [183.338345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.338779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [183.339561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [183.340416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [183.340840] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [183.341092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [183.341818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.342111] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [183.342757] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [183.342760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [183.346729] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [183.371383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [183.375655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [183.375882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.376408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [183.376956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [183.377500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [183.379170] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [183.380278] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [183.381046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [183.381324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [183.381482] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [183.381638] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [183.382260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.382434] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [183.382455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [183.382599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.384047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [183.384179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [183.385029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [183.385493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [183.385498] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [183.385626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [183.412462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [183.412467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [183.412609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.412925] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [183.413060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.413219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [183.413689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [183.414264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [183.414421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [183.414564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [183.415168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.415353] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [183.415905] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [183.418194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [183.442594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [183.447151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [183.447331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.447484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [183.447952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [183.448545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [183.448754] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [183.448907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [183.449512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.449683] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [183.449834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [183.453767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [183.478197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [183.482802] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [183.482984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.483499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.483685] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [183.483721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [183.483885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.484394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [183.484937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [183.485471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [183.486754] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [183.487750] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [183.488545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [183.488758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [183.488940] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [183.489117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [183.489754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.489943] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [183.489963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [183.490129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.491290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [183.491448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [183.492200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [183.492678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [183.492683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [183.492830] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [183.516352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [183.516356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [183.516484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.516630] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [183.516650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [183.516860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.517366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.517530] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [183.517544] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [183.517677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.518231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [183.518728] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [183.519294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [183.520387] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [183.521454] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [183.522242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [183.522412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [183.522561] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [183.522707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [183.523345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.523526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [183.523541] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [183.523674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.524839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [183.524965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [183.525658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [183.526196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [183.526200] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [183.526324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [183.552001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [183.552006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [183.552134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.552284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [183.552300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [183.555174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [183.763823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [183.768877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [183.769465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [183.769743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.770115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [183.771091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [183.771731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [183.772123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [183.772405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [183.772688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [183.772981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [183.773315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [183.773887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [183.775111] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [183.776017] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [183.776599] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [183.776629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [183.777193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [183.777425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [183.777869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [183.778128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [183.778136] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [183.778357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [183.782622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [183.782627] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [183.782778] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [183.799727] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [183.833278] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [184.192415] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload