igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.4-rc5 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gc2d8ef8b9 (x86_64) (Linux: 6.4.0-rc5-linus-v6.4-rc5-g9561de3a55be+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa2d/0xd10 [i915] intel_atomic_commit+0x380/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_dmc_debugfs_status_show+0x3b/0x440 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xa9/0x2f0 ksys_read+0x64/0xe0 do_syscall_64+0x3f/0x90 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_dmc_debugfs_status_show+0x340/0x440 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xa9/0x2f0 Wakeref count: 0 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa2d/0xd10 [i915] intel_atomic_commit+0x380/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 Subtest module-reload: SUCCESS (26.223s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (26.223s)
Dmesg	<6> [168.857351] [IGT] i915_pm_rpm: executing <7> [168.865169] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [168.865557] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [168.865576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [168.865930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [168.866167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.866310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.866945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.867266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [168.867345] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [168.867357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [168.867545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.868084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [168.868616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [168.869189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [168.870703] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [168.871734] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [168.872360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [168.872591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [168.872791] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.872962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.873555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.873704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [168.873803] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [168.873816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [168.873963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.875414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.875548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [168.876270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.876822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.876827] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [168.876981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [168.904824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.904828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [168.904984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.905128] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [168.908646] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [168.908663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [168.908817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.909324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.909529] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [168.910009] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [168.910021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [168.910157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.910632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [168.911150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [168.911721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [168.912782] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [168.913779] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [168.914527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [168.914692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [168.914872] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.915050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.915644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.915802] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [168.916257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [168.916269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [168.916403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.917596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.918175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [168.918936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.919428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.919431] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [168.919555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [168.944734] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.944737] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [168.944902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.945126] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [168.945426] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [168.945438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [168.945573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.946084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.946232] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [168.946256] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [168.946267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [168.946403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.946885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [168.947396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [168.947964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [168.949111] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [168.950186] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [168.950946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [168.951119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [168.951263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.951405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.952019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.952198] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [168.952224] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [168.952235] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [168.952371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.953483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.953610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [168.953969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [168.954433] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.954436] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [168.954559] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [168.980830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [168.980834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [168.980957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.981101] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [180.025500] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.033410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.057867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.063536] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.064206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.064528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.065450] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [180.065585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.066079] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.066482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.066771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.067466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.068102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.068395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.068648] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.069391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.069683] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.070825] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [180.070857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.074628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.099242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.103820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.103983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.104510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.105057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.105604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.107292] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.108098] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.108869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.109156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.109315] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.109472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.110095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.110274] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.110293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.110442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.111834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.111983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.112771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.113303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.113309] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.113432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.139162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.139167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.139294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.139443] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.139485] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.142338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.166797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.172216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.172418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.172582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.173065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.173632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.173806] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.173970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.174584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.174770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.175885] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [180.175879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.177155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.201645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.206567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.206766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.207303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.207516] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.207540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.207724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.208274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.208799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.209351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.210705] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.211784] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.212554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.212731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.212899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.213052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.213658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.213937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.213962] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.216289] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.240700] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.245545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.245779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.245952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.246429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.247025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.247191] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.247352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.247980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.248166] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.248809] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.251793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.276229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.281109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.281304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.282484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.282650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.283404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.283927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.283934] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.284094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.308140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.308147] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.308333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.308549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.308580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.308800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.309339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.309552] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.309572] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.309777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.310325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.310847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.311410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.312573] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.313668] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.314463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [180.314668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [180.314866] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [180.315043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [180.315674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.315871] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.315887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.316038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.317154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.317295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.318026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.318509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.318513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.318647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.343278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.343283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.343408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.343556] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.343571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.347714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [180.451106] [IGT] i915_pm_rpm: starting subtest module-reload <7> [180.574895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.583062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.583784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.584140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.585176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.585884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.586635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.587199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [180.587577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [180.587969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [180.588395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [180.588860] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.588892] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.590214] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.590925] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.591481] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.591847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.592389] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.592621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.593095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.593261] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.593267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.593406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.597540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.597545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [180.597674] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.610808] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [180.651787] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [181.015389] [IGT] Reloading i915 w/o display <7> [181.198206] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [181.198395] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [181.198551] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [181.198689] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [181.198943] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [181.199112] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [181.199718] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [181.199848] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [181.200033] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [181.200146] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [181.200150] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [181.200364] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [181.200378] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [181.200516] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [181.200855] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [181.201083] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [181.201223] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [181.201360] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [181.201495] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [181.205464] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [181.205621] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [181.205802] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [181.206088] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [181.206227] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [181.206369] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [181.206472] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [181.206607] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [181.206708] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [181.206815] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [181.206988] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [181.207098] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [181.207199] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [181.207298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [181.207722] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [181.207912] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [181.208112] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [181.208266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [181.208417] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [181.208567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [181.208718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [181.208895] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [181.209089] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [181.209259] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [181.209459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [181.209608] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [181.209783] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [181.210017] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [181.210162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [181.210313] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [181.210461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [181.210608] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [181.210763] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.210980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [181.211126] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.211272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [181.211417] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.211562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [181.211707] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [181.211869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [181.212125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [181.212289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [181.212437] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [181.212966] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [181.213118] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [181.213278] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [181.213467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.213649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.213805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [181.214031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.214208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [181.214357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [181.214504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [181.214651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [181.214912] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [181.215845] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [181.216226] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [181.216654] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [181.216910] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [181.217129] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [181.217316] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [181.217467] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [181.217616] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [181.217767] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [181.217981] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [181.218117] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [181.218253] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [181.219772] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [181.221142] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [181.221444] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [181.221656] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [181.223336] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [181.223495] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [181.223653] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [181.223855] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [181.224036] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [181.224187] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [181.224336] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [181.224499] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [181.224644] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [181.224838] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [181.224995] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [181.225174] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [181.225380] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [181.225513] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [181.225645] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [181.225834] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [181.225976] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [181.226180] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [181.226471] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [181.226630] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [181.227115] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [181.227272] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [181.227468] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [181.227621] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [181.446758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.457758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.468759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.479760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.490757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.501758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.512759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.523760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.534758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.545758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.556759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.567759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.578758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.589758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.600759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.611760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.622758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.633758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.644758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.655761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.666759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.677757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.688759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.699761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.710758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.721758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.732758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.743759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.754758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.765758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.776758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.787761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [181.787942] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [181.787964] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [181.788018] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [181.788221] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [181.788409] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [181.788559] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [181.788985] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [181.789174] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [181.789353] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [181.789607] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [181.789762] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [181.789951] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [181.790161] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [181.790311] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [181.790647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [181.790882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [181.791044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [181.791192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [181.791337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [181.791482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [181.791627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [181.791814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [181.791984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [181.792130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [181.792276] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [181.792420] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [181.792565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [181.792704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [181.792909] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [181.793118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [181.793283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [181.793423] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [181.793562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [181.793701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [181.793905] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [181.794107] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [181.794256] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [181.794405] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [181.794579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [181.794733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [181.794943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [181.795134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [181.795273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [181.795414] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [181.795552] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [181.795702] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [181.795899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [181.796160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [181.796300] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [181.796450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [181.796593] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [181.796780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [181.796966] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [181.797163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [181.797311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [181.797457] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [181.797604] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [181.797781] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.797986] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.798125] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.798287] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [181.798405] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [181.798531] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [181.798673] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [181.799680] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [181.799884] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [181.800024] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [181.810109] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [181.810344] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [181.810487] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [181.810623] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [181.810790] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [181.810981] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [181.811446] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [181.811562] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [181.811673] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [181.811828] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [181.813743] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [181.814503] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [181.814848] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [181.815354] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [181.815624] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [181.815665] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [181.817209] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [181.829708] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [181.831730] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [181.832507] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [181.833064] [drm:drm_client_modeset_probe] <7> [181.833016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [181.833194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [181.833372] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [181.833348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [181.833424] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.833499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [181.833641] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [181.833943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [181.833965] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [181.833983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.834045] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [181.834188] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [181.834209] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [181.834212] i915 device info: graphics version: 9 <7> [181.834214] i915 device info: media version: 9 <7> [181.834215] i915 device info: display version: 9 <7> [181.834217] i915 device info: graphics stepping: F0 <7> [181.834218] i915 device info: media stepping: F0 <7> [181.834220] i915 device info: display stepping: C0 <7> [181.834214] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [181.834221] i915 device info: base die stepping: <7> [181.834222] i915 device info: gt: 2 <7> [181.834224] i915 device info: memory-regions: 0x21 <7> [181.834225] i915 device info: page-sizes: 0x11000 <7> [181.834226] i915 device info: platform: KABYLAKE <7> [181.834227] i915 device info: ppgtt-size: 48 <7> [181.834230] i915 device info: ppgtt-type: 2 <7> [181.834232] i915 device info: dma_mask_size: 39 <7> [181.834233] i915 device info: is_mobile: no <7> [181.834235] i915 device info: is_lp: no <7> [181.834236] i915 device info: require_force_probe: no <7> [181.834231] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [181.834237] i915 device info: is_dgfx: no <7> [181.834239] i915 device info: has_64bit_reloc: yes <7> [181.834240] i915 device info: has_64k_pages: no <7> [181.834241] i915 device info: gpu_reset_clobbers_display: no <7> [181.834242] i915 device info: has_reset_engine: yes <7> [181.834243] i915 device info: has_3d_pipeline: yes <7> [181.834246] i915 device info: has_4tile: no <7> [181.834247] i915 device info: has_flat_ccs: no <7> [181.834249] i915 device info: has_global_mocs: no <7> [181.834250] i915 device info: has_gmd_id: no <7> [181.834252] i915 device info: has_gt_uc: yes <7> [181.834253] i915 device info: has_heci_pxp: no <7> [181.834254] i915 device info: has_heci_gscfi: no <7> [181.834256] i915 device info: has_guc_deprivilege: no <7> [181.834257] i915 device info: has_l3_ccs_read: no <7> [181.834258] i915 device info: has_l3_dpf: no <7> [181.834260] i915 device info: has_llc: yes <7> [181.834261] i915 device info: has_logical_ring_contexts: yes <7> [181.834263] i915 device info: has_logical_ring_elsq: no <7> [181.834264] i915 device info: has_media_ratio_mode: no <7> [181.834265] i915 device info: has_mslice_steering: no <7> [181.834267] i915 device info: has_oa_bpc_reporting: no <7> [181.834268] i915 device info: has_oa_slice_contrib_limits: no <7> [181.834269] i915 device info: has_oam: no <7> [181.834271] i915 device info: has_one_eu_per_fuse_bit: no <7> [181.834272] i915 device info: has_pxp: no <7> [181.834273] i915 device info: has_rc6: yes <7> [181.834275] i915 device info: has_rc6p: no <7> [181.834276] i915 device info: has_rps: yes <7> [181.834278] i915 device info: has_runtime_pm: yes <7> [181.834279] i915 device info: has_snoop: no <7> [181.834280] i915 device info: has_coherent_ggtt: yes <7> [181.834282] i915 device info: tuning_thread_rr_after_dep: no <7> [181.834283] i915 device info: unfenced_needs_alignment: no <7> [181.834285] i915 device info: hws_needs_physical: no <7> [181.834286] i915 device info: has_pooled_eu: no <7> [181.834287] i915 device info: cursor_needs_physical: no <7> [181.834289] i915 device info: has_cdclk_crawl: no <7> [181.834290] i915 device info: has_cdclk_squash: no <7> [181.834291] i915 device info: has_ddi: yes <7> [181.834293] i915 device info: has_dp_mst: yes <7> [181.834294] i915 device info: has_dsb: no <7> [181.834295] i915 device info: has_fpga_dbg: yes <7> [181.834297] i915 device info: has_gmch: no <7> [181.834298] i915 device info: has_hotplug: yes <7> [181.834299] i915 device info: has_hti: no <7> [181.834301] i915 device info: has_ipc: yes <7> [181.834302] i915 device info: has_overlay: no <7> [181.834303] i915 device info: has_psr: yes <7> [181.834305] i915 device info: has_psr_hw_tracking: yes <7> [181.834306] i915 device info: overlay_needs_physical: no <7> [181.834308] i915 device info: supports_tv: no <7> [181.834309] i915 device info: has_hdcp: yes <7> [181.834310] i915 device info: has_dmc: yes <7> [181.834312] i915 device info: has_dsc: no <7> [181.834313] i915 device info: rawclk rate: 24000 kHz <7> [181.834315] i915 device info: iommu: enabled <7> [181.834316] i915 device info: available engines: 40403 <7> [181.834318] i915 device info: slice total: 1, mask=0001 <7> [181.834320] i915 device info: subslice total: 3 <7> [181.834321] i915 device info: slice0: 3 subslices, mask=00000007 <7> [181.834323] i915 device info: slice1: 0 subslices, mask=00000000 <7> [181.834325] i915 device info: slice2: 0 subslices, mask=00000000 <7> [181.834326] i915 device info: EU total: 24 <7> [181.834328] i915 device info: EU per subslice: 8 <7> [181.834329] i915 device info: has slice power gating: no <7> [181.834330] i915 device info: has subslice power gating: no <7> [181.834332] i915 device info: has EU power gating: yes <6> [181.834333] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [181.834335] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [181.834336] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [181.834250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.834454] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [181.834479] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [181.834496] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [181.834505] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [181.834510] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [181.834514] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [181.834612] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [181.834629] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [181.834657] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [181.834684] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [181.836508] [drm:drm_client_modeset_probe] <7> [181.836789] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [181.836839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.837044] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [181.837066] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [181.837084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.837255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [181.837275] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [181.837292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.837459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [181.837477] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [181.837485] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [181.837490] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [181.837494] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [181.837576] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [181.837594] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [181.837623] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [181.837651] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [181.839973] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [181.996084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.996502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.996701] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.996913] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.997562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.882918] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.891426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.916380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.922815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.923037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.923784] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.923944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.924322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.924366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.924612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.924789] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.928791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [193.136767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [193.142206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [193.142856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [193.142772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [193.142901] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [193.143213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [193.143250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [193.143545] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [193.143643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [193.143987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [193.144637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [193.145295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [193.145725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [193.146043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [193.146332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [193.146621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [193.171813] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [193.224649] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [193.611393] [IGT] Reloading i915 as normal <7> [193.755633] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [193.755855] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [193.756018] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [193.756164] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [193.756412] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [193.756547] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [193.757170] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [193.757312] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [193.757479] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [193.757596] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [193.757602] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [193.758009] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [193.758024] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [193.758163] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [193.758441] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [193.758601] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [193.758739] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [193.758949] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [193.759101] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [193.762536] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [193.762684] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [193.762876] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [193.763025] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [193.763163] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [193.763270] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [193.763373] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [193.763474] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [193.763575] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [193.763675] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [193.763833] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [193.763949] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [193.764049] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [193.764149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [193.764735] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [193.764968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [193.765175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [193.765339] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [193.765509] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [193.765659] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [193.765866] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [193.766026] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [193.766175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [193.766325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [193.766475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [193.766623] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [193.766815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [193.766990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [193.767135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [193.767284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [193.767433] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [193.767581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [193.767727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [193.767939] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [193.768094] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [193.768239] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [193.768391] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [193.768537] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [193.768683] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [193.768903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [193.769159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [193.769352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [193.769526] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [193.770060] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [193.770212] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [193.770375] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [193.770563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [193.770710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [193.770870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [193.771035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [193.771212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [193.771360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [193.771506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [193.771652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [193.771849] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [193.772874] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [193.772916] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [193.773370] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [193.773552] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [193.773694] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [193.773873] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [193.774064] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [193.774200] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [193.774335] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [193.774471] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [193.774606] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [193.774741] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [193.775806] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [193.776632] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [193.776856] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [193.777042] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [193.779710] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [193.779906] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [193.780056] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [193.780202] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [193.780373] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [193.780584] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [193.780739] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [193.780981] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [193.781160] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [193.781307] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [193.781454] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [193.781635] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [193.781893] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [193.782049] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [193.782181] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [193.782312] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [193.782443] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [193.782645] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [193.782996] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [193.783157] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [193.783366] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [193.783519] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [193.783708] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [193.783921] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [193.998759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.009759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.020759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.031760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.042758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.053758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.064761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.075761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.086758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.097758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.108759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.119757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.130757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.141760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.152758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.163758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.174759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.185757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.196763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.207760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.218757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.229757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.240760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.251762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.262764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.273759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.284763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.295762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.306758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.317757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.328758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.339759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [194.339941] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [194.339963] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [194.340019] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [194.340222] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [194.340409] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [194.340559] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [194.340968] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [194.341153] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [194.341297] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [194.341585] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [194.341728] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [194.341876] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [194.342130] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [194.342278] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [194.342624] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [194.342816] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [194.343030] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [194.343178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [194.343325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [194.343470] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [194.343615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [194.343772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [194.343951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [194.344096] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [194.344275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [194.344419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [194.344565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [194.344704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [194.344883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [194.345076] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [194.345226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [194.345382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [194.345521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [194.345660] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [194.345856] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [194.346008] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [194.346158] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [194.346306] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [194.346477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [194.346629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [194.346789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [194.346929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [194.347068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [194.347206] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [194.347345] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [194.347495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [194.347639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [194.347787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [194.347926] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [194.348144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [194.348286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [194.348425] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [194.348564] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [194.348767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [194.348969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [194.349134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [194.349299] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [194.349446] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [194.349587] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [194.349725] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [194.349896] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [194.350015] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [194.350141] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [194.350283] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [194.351296] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [194.351440] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [194.351579] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [194.361888] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [194.362122] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [194.362263] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [194.362400] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [194.362536] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [194.362688] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [194.363241] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [194.363359] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [194.363498] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [194.363606] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [194.367322] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [194.368356] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [194.368863] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [194.369671] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [194.370244] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [194.370294] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [194.371730] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [194.383781] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [194.385691] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [194.386504] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [194.387403] [drm:drm_client_modeset_probe] <7> [194.387359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [194.387660] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [194.387594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [194.387701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [194.387822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [194.388038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [194.388401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [194.388802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [194.388853] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [194.389010] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [194.389113] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [194.389118] i915 device info: graphics version: 9 <7> [194.389120] i915 device info: media version: 9 <7> [194.389122] i915 device info: display version: 9 <7> [194.389124] i915 device info: graphics stepping: F0 <7> [194.389126] i915 device info: media stepping: F0 <7> [194.389128] i915 device info: display stepping: C0 <7> [194.389130] i915 device info: base die stepping: <7> [194.389132] i915 device info: gt: 2 <7> [194.389134] i915 device info: memory-regions: 0x21 <7> [194.389136] i915 device info: page-sizes: 0x11000 <7> [194.389139] i915 device info: platform: KABYLAKE <7> [194.389140] i915 device info: ppgtt-size: 48 <7> [194.389142] i915 device info: ppgtt-type: 2 <7> [194.389143] i915 device info: dma_mask_size: 39 <7> [194.389144] i915 device info: is_mobile: no <7> [194.389145] i915 device info: is_lp: no <7> [194.389146] i915 device info: require_force_probe: no <7> [194.389148] i915 device info: is_dgfx: no <7> [194.389149] i915 device info: has_64bit_reloc: yes <7> [194.389150] i915 device info: has_64k_pages: no <7> [194.389151] i915 device info: gpu_reset_clobbers_display: no <7> [194.389152] i915 device info: has_reset_engine: yes <7> [194.389153] i915 device info: has_3d_pipeline: yes <7> [194.389155] i915 device info: has_4tile: no <7> [194.389156] i915 device info: has_flat_ccs: no <7> [194.389157] i915 device info: has_global_mocs: no <7> [194.389158] i915 device info: has_gmd_id: no <7> [194.389159] i915 device info: has_gt_uc: yes <7> [194.389160] i915 device info: has_heci_pxp: no <7> [194.389161] i915 device info: has_heci_gscfi: no <7> [194.389163] i915 device info: has_guc_deprivilege: no <7> [194.389164] i915 device info: has_l3_ccs_read: no <7> [194.389165] i915 device info: has_l3_dpf: no <7> [194.389166] i915 device info: has_llc: yes <7> [194.389167] i915 device info: has_logical_ring_contexts: yes <7> [194.389168] i915 device info: has_logical_ring_elsq: no <7> [194.389169] i915 device info: has_media_ratio_mode: no <7> [194.389171] i915 device info: has_mslice_steering: no <7> [194.389172] i915 device info: has_oa_bpc_reporting: no <7> [194.389173] i915 device info: has_oa_slice_contrib_limits: no <7> [194.389174] i915 device info: has_oam: no <7> [194.389175] i915 device info: has_one_eu_per_fuse_bit: no <7> [194.389176] i915 device info: has_pxp: no <7> [194.389177] i915 device info: has_rc6: yes <7> [194.389178] i915 device info: has_rc6p: no <7> [194.389180] i915 device info: has_rps: yes <7> [194.389191] i915 device info: has_runtime_pm: yes <7> [194.389192] i915 device info: has_snoop: no <7> [194.389194] i915 device info: has_coherent_ggtt: yes <7> [194.389195] i915 device info: tuning_thread_rr_after_dep: no <7> [194.389196] i915 device info: unfenced_needs_alignment: no <7> [194.389198] i915 device info: hws_needs_physical: no <7> [194.389199] i915 device info: has_pooled_eu: no <7> [194.389201] i915 device info: cursor_needs_physical: no <7> [194.389202] i915 device info: has_cdclk_crawl: no <7> [194.389203] i915 device info: has_cdclk_squash: no <7> [194.389205] i915 device info: has_ddi: yes <7> [194.389206] i915 device info: has_dp_mst: yes <7> [194.389207] i915 device info: has_dsb: no <7> [194.389209] i915 device info: has_fpga_dbg: yes <7> [194.389210] i915 device info: has_gmch: no <7> [194.389211] i915 device info: has_hotplug: yes <7> [194.389213] i915 device info: has_hti: no <7> [194.389214] i915 device info: has_ipc: yes <7> [194.389215] i915 device info: has_overlay: no <7> [194.389217] i915 device info: has_psr: yes <7> [194.389218] i915 device info: has_psr_hw_tracking: yes <7> [194.389220] i915 device info: overlay_needs_physical: no <7> [194.389221] i915 device info: supports_tv: no <7> [194.389222] i915 device info: has_hdcp: yes <7> [194.389224] i915 device info: has_dmc: yes <7> [194.389225] i915 device info: has_dsc: no <7> [194.389226] i915 device info: rawclk rate: 24000 kHz <7> [194.389228] i915 device info: iommu: enabled <7> [194.389230] i915 device info: available engines: 40403 <7> [194.389231] i915 device info: slice total: 1, mask=0001 <7> [194.389233] i915 device info: subslice total: 3 <7> [194.389235] i915 device info: slice0: 3 subslices, mask=00000007 <7> [194.389237] i915 device info: slice1: 0 subslices, mask=00000000 <7> [194.389238] i915 device info: slice2: 0 subslices, mask=00000000 <7> [194.389240] i915 device info: EU total: 24 <7> [194.389241] i915 device info: EU per subslice: 8 <7> [194.389243] i915 device info: has slice power gating: no <7> [194.389244] i915 device info: has subslice power gating: no <7> [194.389245] i915 device info: has EU power gating: yes <6> [194.389247] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [194.389249] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [194.389250] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [194.389197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [194.389861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.390433] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [194.390717] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [194.390741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [194.390780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [194.391052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.391636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [194.392232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [194.392818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [194.394647] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [194.395742] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [194.396954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [194.397149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [194.397308] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [194.397462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [194.398646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.398831] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [194.398851] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [194.398870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [194.398882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [194.399036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.400363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.400520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [194.401291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.401960] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.401968] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [194.402196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [194.433420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.433429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [194.433598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.433791] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [194.433826] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [194.433852] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [194.433865] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [194.433868] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [194.433871] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [194.434028] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [194.434047] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [194.434067] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [194.434087] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [194.434834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.434999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [194.435495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [194.436247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [194.436404] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [194.436554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [194.437189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.437673] [drm:drm_client_modeset_probe] <7> [194.437912] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [194.437950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [194.438155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.438879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.439045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [194.439060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [194.439072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [194.439196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.439672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [194.440222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [194.440814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [194.442376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [194.442856] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [194.443186] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [194.443701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [194.444461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [194.444648] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [194.444900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [194.445555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.446080] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [194.446098] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [194.446110] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [194.446237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.447474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.447647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [194.448361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.448885] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.448891] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [194.449032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [194.479126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.479132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [194.479251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.479388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [194.479403] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [194.479409] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [194.479412] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [194.479414] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [194.479488] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [194.479499] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [194.479523] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [194.479541] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [194.479543] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [194.479609] [drm:drm_client_modeset_probe] <7> [194.479560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [194.479794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.480441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.480582] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [194.480596] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [194.480619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [194.480875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.481400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.481609] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [194.481629] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [194.481647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [194.481844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.482371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [194.482890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [194.483449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [194.484785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [194.485788] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [194.486576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [194.486733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [194.486882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [194.487045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [194.487642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.487794] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [194.487814] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [194.487831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [194.487979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.489080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.489223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [194.489908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.490385] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.490389] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [194.490505] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [194.515130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.515135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [194.515251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.515386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [194.515399] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [194.515402] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [194.515404] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [194.515407] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [194.515436] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [194.515443] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [194.515458] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [194.515471] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [194.515541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [194.515558] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [194.515698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.516255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [194.516773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [194.517338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [194.518785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [194.519780] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [194.520394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [194.520667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [194.520846] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [194.521038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [194.521618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.521761] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [194.521874] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [194.521899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [194.522020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.523779] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.523905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [194.524596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.525114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.525132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [194.525317] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [194.547741] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.547753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [194.547934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.548069] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [194.550536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [194.550552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [194.550679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.551164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.551322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [194.551827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [194.551841] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [194.551999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.552458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [194.552990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [194.553550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [194.554779] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [194.555785] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [194.556567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [194.556719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [194.556954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [194.557124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [194.557703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.557850] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [194.558332] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [194.558344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [194.558476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.559525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.559643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [194.560350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.560876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.560880] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [194.561006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [194.583920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.583924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [194.584039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.584173] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [194.584474] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [194.584486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [194.584608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.585075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.585274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [194.585298] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [194.585309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [194.585431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.585917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [194.586411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [194.586979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [194.588113] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [194.589216] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [194.589946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [194.590106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [194.590237] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [194.590364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [194.590975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.591122] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [194.591148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [194.591159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [194.591279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.592349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.592465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [194.593652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [194.594162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.594166] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [194.594296] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [194.617734] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [194.617739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [194.617898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.618097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [204.675879] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [204.683444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [205.671910] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [205.678596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [205.679267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [205.679654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.680120] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [205.680849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.681577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [205.682154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.682501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [205.683359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [205.684128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [205.684277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [205.684415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [205.685047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.685234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [205.685840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [205.685982] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [205.687459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [205.711097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [205.716167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [205.716372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.716914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [205.717484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [205.718059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [205.719799] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [205.720950] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [205.721630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [205.721975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [205.722133] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [205.722261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [205.722854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.723114] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [205.723133] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [205.723257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.724486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [205.724612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [205.725291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [205.725806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [205.725813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.725983] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [205.750634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [205.750639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [205.750779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.750976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [205.751004] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [205.753769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [205.778191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [205.783551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [205.783704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.783860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [205.784329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [205.784963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [205.785167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [205.785310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [205.785910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.786089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [205.787664] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [205.787774] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [205.789793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [205.814246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [205.819185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [205.819317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.819837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.820019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [205.820042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [205.820198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.820745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [205.821259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [205.821831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [205.823205] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [205.824123] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [205.824796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [205.825008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [205.825193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [205.825375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [205.826034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.826229] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [205.826259] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [205.830008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [205.854471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [205.859108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [205.859260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.859398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [205.859852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [205.860422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [205.860562] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [205.860698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [205.861295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.861447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [205.862437] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [205.863792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [205.888198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [205.892784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [205.892909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.894008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [205.894141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [205.894852] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [205.895333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [205.895338] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.895474] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [205.924987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [205.924992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [205.925121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.925256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [205.925279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [205.925399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.925922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.926099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [205.926113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [205.926234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.926699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [205.927231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [205.927806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [205.928964] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [205.929781] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [205.930567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [205.930720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [205.930880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [205.931072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [205.931652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.931817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [205.931859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [205.931992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [205.933573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [205.933687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [205.934368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [205.934929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [205.934932] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.935086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [205.960752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [205.960756] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [205.960897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [205.961029] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [205.961044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [205.963416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [206.194825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [206.200279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [206.200906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [206.201119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [206.201802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [206.202254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [206.202257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [206.202313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [206.202788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [206.203471] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [206.204195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [206.204717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [206.205108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [206.205476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [206.205868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [206.207178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [206.208014] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [206.208660] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [206.208722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [206.209383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [206.209673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [206.210262] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [206.210590] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [206.210602] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [206.210931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [206.215677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [206.215689] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [206.216008] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [206.239046] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [206.298383] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [206.674508] [IGT] i915_pm_rpm: exiting, ret=0

<6> [168.857351] [IGT] i915_pm_rpm: executing

<7> [168.865169] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [168.865557] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [168.865576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [168.865930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [168.866167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [168.866310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [168.866945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.867266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [168.867345] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [168.867357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [168.867545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.868084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [168.868616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [168.869189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [168.870703] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [168.871734] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [168.872360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [168.872591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [168.872791] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [168.872962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [168.873555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.873704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [168.873803] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [168.873816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [168.873963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.875414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [168.875548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [168.876270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [168.876822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [168.876827] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [168.876981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [168.904824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [168.904828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [168.904984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.905128] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [168.908646] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [168.908663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [168.908817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.909324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.909529] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [168.910009] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [168.910021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [168.910157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.910632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [168.911150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [168.911721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [168.912782] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [168.913779] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [168.914527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [168.914692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [168.914872] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [168.915050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [168.915644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.915802] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [168.916257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [168.916269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [168.916403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.917596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [168.918175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [168.918936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [168.919428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [168.919431] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [168.919555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [168.944734] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [168.944737] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [168.944902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.945126] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [168.945426] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [168.945438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [168.945573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.946084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.946232] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [168.946256] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [168.946267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [168.946403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.946885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [168.947396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [168.947964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [168.949111] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [168.950186] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [168.950946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [168.951119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [168.951263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [168.951405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [168.952019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.952198] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [168.952224] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [168.952235] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [168.952371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.953483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [168.953610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [168.953969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [168.954433] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [168.954436] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [168.954559] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [168.980830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [168.980834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [168.980957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.981101] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [180.025500] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.033410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [180.057867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.063536] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [180.064206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.064528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.065450] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [180.065585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.066079] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [180.066482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.066771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.067466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.068102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [180.068395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [180.068648] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [180.069391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.069683] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.070825] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [180.070857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [180.074628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [180.099242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.103820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.103983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.104510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.105057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.105604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [180.107292] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [180.108098] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [180.108869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [180.109156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [180.109315] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [180.109472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [180.110095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.110274] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [180.110293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [180.110442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.111834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.111983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [180.112771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.113303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.113309] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [180.113432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [180.139162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.139167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [180.139294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.139443] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [180.139485] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.142338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [180.166797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.172216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.172418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.172582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.173065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.173632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [180.173806] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [180.173970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [180.174584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.174770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.175885] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [180.175879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [180.177155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [180.201645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.206567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.206766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.207303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.207516] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [180.207540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [180.207724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.208274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.208799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.209351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [180.210705] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [180.211784] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [180.212554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [180.212731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [180.212899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [180.213052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [180.213658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.213937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [180.213962] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.216289] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [180.240700] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.245545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.245779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.245952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.246429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.247025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [180.247191] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [180.247352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [180.247980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.248166] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.248809] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [180.251793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [180.276229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.281109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.281304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.282484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.282650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [180.283404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.283927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.283934] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [180.284094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [180.308140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.308147] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [180.308333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.308549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [180.308580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [180.308800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.309339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.309552] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [180.309572] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [180.309777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.310325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.310847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.311410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [180.312573] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [180.313668] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [180.314463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [180.314668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [180.314866] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [180.315043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [180.315674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.315871] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [180.315887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [180.316038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.317154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.317295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [180.318026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.318509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.318513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [180.318647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [180.343278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.343283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [180.343408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.343556] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [180.343571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.347714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [180.451106] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [180.574895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.583062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [180.583784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.584140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.585176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.585884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.586635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [180.587199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [180.587577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [180.587969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [180.588395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [180.588860] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [180.588892] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [180.590214] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [180.590925] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [180.591481] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [180.591847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [180.592389] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.592621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [180.593095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.593261] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.593267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [180.593406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [180.597540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.597545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [180.597674] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [180.610808] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [180.651787] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [181.015389] [IGT] Reloading i915 w/o display

<7> [181.198206] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [181.198395] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [181.198551] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [181.198689] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [181.198943] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [181.199112] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [181.199718] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [181.199848] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [181.200033] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [181.200146] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [181.200150] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [181.200364] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [181.200378] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [181.200516] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [181.200855] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [181.201083] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [181.201223] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [181.201360] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [181.201495] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [181.205464] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [181.205621] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [181.205802] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [181.206088] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [181.206227] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [181.206369] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [181.206472] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [181.206607] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [181.206708] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [181.206815] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [181.206988] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [181.207098] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [181.207199] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [181.207298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [181.207722] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [181.207912] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [181.208112] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [181.208266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [181.208417] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [181.208567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [181.208718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [181.208895] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [181.209089] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [181.209259] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [181.209459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [181.209608] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [181.209783] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [181.210017] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [181.210162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [181.210313] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [181.210461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [181.210608] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [181.210763] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [181.210980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [181.211126] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [181.211272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [181.211417] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [181.211562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [181.211707] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [181.211869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [181.212125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [181.212289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [181.212437] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [181.212966] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [181.213118] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [181.213278] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [181.213467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.213649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [181.213805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [181.214031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [181.214208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [181.214357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [181.214504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [181.214651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [181.214912] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [181.215845] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [181.216226] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [181.216654] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [181.216910] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [181.217129] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [181.217316] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [181.217467] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [181.217616] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [181.217767] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [181.217981] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [181.218117] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [181.218253] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [181.219772] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [181.221142] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [181.221444] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [181.221656] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [181.223336] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [181.223495] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [181.223653] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [181.223855] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [181.224036] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [181.224187] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [181.224336] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [181.224499] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [181.224644] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [181.224838] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [181.224995] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [181.225174] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [181.225380] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [181.225513] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [181.225645] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [181.225834] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [181.225976] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [181.226180] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [181.226471] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [181.226630] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [181.227115] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [181.227272] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [181.227468] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [181.227621] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [181.446758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.457758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.468759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.479760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.490757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.501758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.512759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.523760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.534758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.545758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.556759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.567759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.578758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.589758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.600759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.611760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.622758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.633758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.644758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.655761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.666759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.677757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.688759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.699761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.710758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.721758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.732758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.743759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.754758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.765758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.776758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.787761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [181.787942] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [181.787964] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [181.788018] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [181.788221] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [181.788409] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [181.788559] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [181.788985] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [181.789174] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [181.789353] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [181.789607] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [181.789762] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [181.789951] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [181.790161] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [181.790311] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [181.790647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [181.790882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [181.791044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [181.791192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [181.791337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [181.791482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [181.791627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [181.791814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [181.791984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [181.792130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [181.792276] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [181.792420] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [181.792565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [181.792704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [181.792909] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [181.793118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [181.793283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [181.793423] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [181.793562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [181.793701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [181.793905] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [181.794107] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [181.794256] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [181.794405] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [181.794579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [181.794733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [181.794943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [181.795134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [181.795273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [181.795414] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [181.795552] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [181.795702] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [181.795899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [181.796160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [181.796300] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [181.796450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [181.796593] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [181.796780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [181.796966] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [181.797163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [181.797311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [181.797457] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [181.797604] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [181.797781] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [181.797986] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [181.798125] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [181.798287] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [181.798405] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [181.798531] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [181.798673] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [181.799680] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [181.799884] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [181.800024] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [181.810109] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [181.810344] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [181.810487] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [181.810623] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [181.810790] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [181.810981] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [181.811446] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [181.811562] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [181.811673] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [181.811828] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [181.813743] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [181.814503] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [181.814848] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [181.815354] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [181.815624] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [181.815665] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [181.817209] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [181.829708] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [181.831730] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [181.832507] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [181.833064] [drm:drm_client_modeset_probe]

<7> [181.833016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [181.833194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [181.833372] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [181.833348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [181.833424] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [181.833499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [181.833641] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [181.833943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [181.833965] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [181.833983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [181.834045] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [181.834188] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [181.834209] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [181.834212] i915 device info: graphics version: 9

<7> [181.834214] i915 device info: media version: 9

<7> [181.834215] i915 device info: display version: 9

<7> [181.834217] i915 device info: graphics stepping: F0

<7> [181.834218] i915 device info: media stepping: F0

<7> [181.834220] i915 device info: display stepping: C0

<7> [181.834214] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [181.834221] i915 device info: base die stepping: **

<7> [181.834222] i915 device info: gt: 2

<7> [181.834224] i915 device info: memory-regions: 0x21

<7> [181.834225] i915 device info: page-sizes: 0x11000

<7> [181.834226] i915 device info: platform: KABYLAKE

<7> [181.834227] i915 device info: ppgtt-size: 48

<7> [181.834230] i915 device info: ppgtt-type: 2

<7> [181.834232] i915 device info: dma_mask_size: 39

<7> [181.834233] i915 device info: is_mobile: no

<7> [181.834235] i915 device info: is_lp: no

<7> [181.834236] i915 device info: require_force_probe: no

<7> [181.834231] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [181.834237] i915 device info: is_dgfx: no

<7> [181.834239] i915 device info: has_64bit_reloc: yes

<7> [181.834240] i915 device info: has_64k_pages: no

<7> [181.834241] i915 device info: gpu_reset_clobbers_display: no

<7> [181.834242] i915 device info: has_reset_engine: yes

<7> [181.834243] i915 device info: has_3d_pipeline: yes

<7> [181.834246] i915 device info: has_4tile: no

<7> [181.834247] i915 device info: has_flat_ccs: no

<7> [181.834249] i915 device info: has_global_mocs: no

<7> [181.834250] i915 device info: has_gmd_id: no

<7> [181.834252] i915 device info: has_gt_uc: yes

<7> [181.834253] i915 device info: has_heci_pxp: no

<7> [181.834254] i915 device info: has_heci_gscfi: no

<7> [181.834256] i915 device info: has_guc_deprivilege: no

<7> [181.834257] i915 device info: has_l3_ccs_read: no

<7> [181.834258] i915 device info: has_l3_dpf: no

<7> [181.834260] i915 device info: has_llc: yes

<7> [181.834261] i915 device info: has_logical_ring_contexts: yes

<7> [181.834263] i915 device info: has_logical_ring_elsq: no

<7> [181.834264] i915 device info: has_media_ratio_mode: no

<7> [181.834265] i915 device info: has_mslice_steering: no

<7> [181.834267] i915 device info: has_oa_bpc_reporting: no

<7> [181.834268] i915 device info: has_oa_slice_contrib_limits: no

<7> [181.834269] i915 device info: has_oam: no

<7> [181.834271] i915 device info: has_one_eu_per_fuse_bit: no

<7> [181.834272] i915 device info: has_pxp: no

<7> [181.834273] i915 device info: has_rc6: yes

<7> [181.834275] i915 device info: has_rc6p: no

<7> [181.834276] i915 device info: has_rps: yes

<7> [181.834278] i915 device info: has_runtime_pm: yes

<7> [181.834279] i915 device info: has_snoop: no

<7> [181.834280] i915 device info: has_coherent_ggtt: yes

<7> [181.834282] i915 device info: tuning_thread_rr_after_dep: no

<7> [181.834283] i915 device info: unfenced_needs_alignment: no

<7> [181.834285] i915 device info: hws_needs_physical: no

<7> [181.834286] i915 device info: has_pooled_eu: no

<7> [181.834287] i915 device info: cursor_needs_physical: no

<7> [181.834289] i915 device info: has_cdclk_crawl: no

<7> [181.834290] i915 device info: has_cdclk_squash: no

<7> [181.834291] i915 device info: has_ddi: yes

<7> [181.834293] i915 device info: has_dp_mst: yes

<7> [181.834294] i915 device info: has_dsb: no

<7> [181.834295] i915 device info: has_fpga_dbg: yes

<7> [181.834297] i915 device info: has_gmch: no

<7> [181.834298] i915 device info: has_hotplug: yes

<7> [181.834299] i915 device info: has_hti: no

<7> [181.834301] i915 device info: has_ipc: yes

<7> [181.834302] i915 device info: has_overlay: no

<7> [181.834303] i915 device info: has_psr: yes

<7> [181.834305] i915 device info: has_psr_hw_tracking: yes

<7> [181.834306] i915 device info: overlay_needs_physical: no

<7> [181.834308] i915 device info: supports_tv: no

<7> [181.834309] i915 device info: has_hdcp: yes

<7> [181.834310] i915 device info: has_dmc: yes

<7> [181.834312] i915 device info: has_dsc: no

<7> [181.834313] i915 device info: rawclk rate: 24000 kHz

<7> [181.834315] i915 device info: iommu: enabled

<7> [181.834316] i915 device info: available engines: 40403

<7> [181.834318] i915 device info: slice total: 1, mask=0001

<7> [181.834320] i915 device info: subslice total: 3

<7> [181.834321] i915 device info: slice0: 3 subslices, mask=00000007

<7> [181.834323] i915 device info: slice1: 0 subslices, mask=00000000

<7> [181.834325] i915 device info: slice2: 0 subslices, mask=00000000

<7> [181.834326] i915 device info: EU total: 24

<7> [181.834328] i915 device info: EU per subslice: 8

<7> [181.834329] i915 device info: has slice power gating: no

<7> [181.834330] i915 device info: has subslice power gating: no

<7> [181.834332] i915 device info: has EU power gating: yes

<6> [181.834333] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [181.834335] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [181.834336] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [181.834250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [181.834454] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [181.834479] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [181.834496] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [181.834505] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [181.834510] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [181.834514] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [181.834612] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [181.834629] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [181.834657] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [181.834684] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [181.836508] [drm:drm_client_modeset_probe]

<7> [181.836789] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [181.836839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [181.837044] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [181.837066] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [181.837084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [181.837255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [181.837275] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [181.837292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [181.837459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [181.837477] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [181.837485] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [181.837490] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [181.837494] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [181.837576] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [181.837594] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [181.837623] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [181.837651] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [181.839973] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [181.996084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [181.996502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [181.996701] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [181.996913] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [181.997562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [192.882918] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [192.891426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [192.916380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [192.922815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [192.923037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [192.923784] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [192.923944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [192.924322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [192.924366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [192.924612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [192.924789] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [192.928791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [193.136767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [193.142206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [193.142856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [193.142772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [193.142901] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [193.143213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [193.143250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [193.143545] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [193.143643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [193.143987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [193.144637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [193.145295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [193.145725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [193.146043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [193.146332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [193.146621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [193.171813] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [193.224649] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [193.611393] [IGT] Reloading i915 as normal

<7> [193.755633] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [193.755855] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [193.756018] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [193.756164] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [193.756412] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [193.756547] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [193.757170] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [193.757312] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [193.757479] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [193.757596] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [193.757602] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [193.758009] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [193.758024] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [193.758163] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [193.758441] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [193.758601] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [193.758739] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [193.758949] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [193.759101] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [193.762536] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [193.762684] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [193.762876] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [193.763025] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [193.763163] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [193.763270] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [193.763373] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [193.763474] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [193.763575] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [193.763675] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [193.763833] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [193.763949] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [193.764049] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [193.764149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [193.764735] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [193.764968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [193.765175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [193.765339] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [193.765509] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [193.765659] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [193.765866] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [193.766026] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [193.766175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [193.766325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [193.766475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [193.766623] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [193.766815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [193.766990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [193.767135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [193.767284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [193.767433] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [193.767581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [193.767727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [193.767939] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [193.768094] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [193.768239] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [193.768391] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [193.768537] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [193.768683] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [193.768903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [193.769159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [193.769352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [193.769526] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [193.770060] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [193.770212] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [193.770375] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [193.770563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [193.770710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [193.770870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [193.771035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [193.771212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [193.771360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [193.771506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [193.771652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [193.771849] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [193.772874] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [193.772916] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [193.773370] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [193.773552] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [193.773694] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [193.773873] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [193.774064] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [193.774200] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [193.774335] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [193.774471] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [193.774606] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [193.774741] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [193.775806] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [193.776632] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [193.776856] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [193.777042] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [193.779710] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [193.779906] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [193.780056] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [193.780202] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [193.780373] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [193.780584] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [193.780739] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [193.780981] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [193.781160] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [193.781307] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [193.781454] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [193.781635] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [193.781893] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [193.782049] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [193.782181] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [193.782312] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [193.782443] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [193.782645] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [193.782996] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [193.783157] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [193.783366] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [193.783519] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [193.783708] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [193.783921] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [193.998759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.009759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.020759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.031760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.042758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.053758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.064761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.075761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.086758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.097758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.108759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.119757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.130757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.141760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.152758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.163758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.174759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.185757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.196763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.207760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.218757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.229757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.240760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.251762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.262764] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.273759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.284763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.295762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.306758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.317757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.328758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.339759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [194.339941] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [194.339963] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [194.340019] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [194.340222] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [194.340409] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [194.340559] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [194.340968] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [194.341153] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [194.341297] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [194.341585] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [194.341728] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [194.341876] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [194.342130] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [194.342278] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [194.342624] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [194.342816] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [194.343030] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [194.343178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [194.343325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [194.343470] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [194.343615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [194.343772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [194.343951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [194.344096] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [194.344275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [194.344419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [194.344565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [194.344704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [194.344883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [194.345076] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [194.345226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [194.345382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [194.345521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [194.345660] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [194.345856] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [194.346008] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [194.346158] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [194.346306] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [194.346477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [194.346629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [194.346789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [194.346929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [194.347068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [194.347206] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [194.347345] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [194.347495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [194.347639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [194.347787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [194.347926] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [194.348144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [194.348286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [194.348425] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [194.348564] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [194.348767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [194.348969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [194.349134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [194.349299] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [194.349446] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [194.349587] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [194.349725] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [194.349896] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [194.350015] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [194.350141] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [194.350283] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [194.351296] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [194.351440] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [194.351579] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [194.361888] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [194.362122] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [194.362263] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [194.362400] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [194.362536] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [194.362688] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [194.363241] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [194.363359] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [194.363498] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [194.363606] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [194.367322] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [194.368356] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [194.368863] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [194.369671] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [194.370244] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [194.370294] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [194.371730] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [194.383781] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [194.385691] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [194.386504] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [194.387403] [drm:drm_client_modeset_probe]

<7> [194.387359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [194.387660] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [194.387594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [194.387701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [194.387822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [194.388038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [194.388401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [194.388802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [194.388853] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [194.389010] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [194.389113] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [194.389118] i915 device info: graphics version: 9

<7> [194.389120] i915 device info: media version: 9

<7> [194.389122] i915 device info: display version: 9

<7> [194.389124] i915 device info: graphics stepping: F0

<7> [194.389126] i915 device info: media stepping: F0

<7> [194.389128] i915 device info: display stepping: C0

<7> [194.389130] i915 device info: base die stepping: **

<7> [194.389132] i915 device info: gt: 2

<7> [194.389134] i915 device info: memory-regions: 0x21

<7> [194.389136] i915 device info: page-sizes: 0x11000

<7> [194.389139] i915 device info: platform: KABYLAKE

<7> [194.389140] i915 device info: ppgtt-size: 48

<7> [194.389142] i915 device info: ppgtt-type: 2

<7> [194.389143] i915 device info: dma_mask_size: 39

<7> [194.389144] i915 device info: is_mobile: no

<7> [194.389145] i915 device info: is_lp: no

<7> [194.389146] i915 device info: require_force_probe: no

<7> [194.389148] i915 device info: is_dgfx: no

<7> [194.389149] i915 device info: has_64bit_reloc: yes

<7> [194.389150] i915 device info: has_64k_pages: no

<7> [194.389151] i915 device info: gpu_reset_clobbers_display: no

<7> [194.389152] i915 device info: has_reset_engine: yes

<7> [194.389153] i915 device info: has_3d_pipeline: yes

<7> [194.389155] i915 device info: has_4tile: no

<7> [194.389156] i915 device info: has_flat_ccs: no

<7> [194.389157] i915 device info: has_global_mocs: no

<7> [194.389158] i915 device info: has_gmd_id: no

<7> [194.389159] i915 device info: has_gt_uc: yes

<7> [194.389160] i915 device info: has_heci_pxp: no

<7> [194.389161] i915 device info: has_heci_gscfi: no

<7> [194.389163] i915 device info: has_guc_deprivilege: no

<7> [194.389164] i915 device info: has_l3_ccs_read: no

<7> [194.389165] i915 device info: has_l3_dpf: no

<7> [194.389166] i915 device info: has_llc: yes

<7> [194.389167] i915 device info: has_logical_ring_contexts: yes

<7> [194.389168] i915 device info: has_logical_ring_elsq: no

<7> [194.389169] i915 device info: has_media_ratio_mode: no

<7> [194.389171] i915 device info: has_mslice_steering: no

<7> [194.389172] i915 device info: has_oa_bpc_reporting: no

<7> [194.389173] i915 device info: has_oa_slice_contrib_limits: no

<7> [194.389174] i915 device info: has_oam: no

<7> [194.389175] i915 device info: has_one_eu_per_fuse_bit: no

<7> [194.389176] i915 device info: has_pxp: no

<7> [194.389177] i915 device info: has_rc6: yes

<7> [194.389178] i915 device info: has_rc6p: no

<7> [194.389180] i915 device info: has_rps: yes

<7> [194.389191] i915 device info: has_runtime_pm: yes

<7> [194.389192] i915 device info: has_snoop: no

<7> [194.389194] i915 device info: has_coherent_ggtt: yes

<7> [194.389195] i915 device info: tuning_thread_rr_after_dep: no

<7> [194.389196] i915 device info: unfenced_needs_alignment: no

<7> [194.389198] i915 device info: hws_needs_physical: no

<7> [194.389199] i915 device info: has_pooled_eu: no

<7> [194.389201] i915 device info: cursor_needs_physical: no

<7> [194.389202] i915 device info: has_cdclk_crawl: no

<7> [194.389203] i915 device info: has_cdclk_squash: no

<7> [194.389205] i915 device info: has_ddi: yes

<7> [194.389206] i915 device info: has_dp_mst: yes

<7> [194.389207] i915 device info: has_dsb: no

<7> [194.389209] i915 device info: has_fpga_dbg: yes

<7> [194.389210] i915 device info: has_gmch: no

<7> [194.389211] i915 device info: has_hotplug: yes

<7> [194.389213] i915 device info: has_hti: no

<7> [194.389214] i915 device info: has_ipc: yes

<7> [194.389215] i915 device info: has_overlay: no

<7> [194.389217] i915 device info: has_psr: yes

<7> [194.389218] i915 device info: has_psr_hw_tracking: yes

<7> [194.389220] i915 device info: overlay_needs_physical: no

<7> [194.389221] i915 device info: supports_tv: no

<7> [194.389222] i915 device info: has_hdcp: yes

<7> [194.389224] i915 device info: has_dmc: yes

<7> [194.389225] i915 device info: has_dsc: no

<7> [194.389226] i915 device info: rawclk rate: 24000 kHz

<7> [194.389228] i915 device info: iommu: enabled

<7> [194.389230] i915 device info: available engines: 40403

<7> [194.389231] i915 device info: slice total: 1, mask=0001

<7> [194.389233] i915 device info: subslice total: 3

<7> [194.389235] i915 device info: slice0: 3 subslices, mask=00000007

<7> [194.389237] i915 device info: slice1: 0 subslices, mask=00000000

<7> [194.389238] i915 device info: slice2: 0 subslices, mask=00000000

<7> [194.389240] i915 device info: EU total: 24

<7> [194.389241] i915 device info: EU per subslice: 8

<7> [194.389243] i915 device info: has slice power gating: no

<7> [194.389244] i915 device info: has subslice power gating: no

<7> [194.389245] i915 device info: has EU power gating: yes

<6> [194.389247] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [194.389249] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [194.389250] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [194.389197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [194.389861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.390433] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [194.390717] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [194.390741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [194.390780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [194.391052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.391636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [194.392232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [194.392818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [194.394647] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [194.395742] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [194.396954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [194.397149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [194.397308] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [194.397462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [194.398646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.398831] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [194.398851] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [194.398870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [194.398882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [194.399036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.400363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.400520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [194.401291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.401960] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.401968] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [194.402196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [194.433420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.433429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [194.433598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.433791] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [194.433826] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [194.433852] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [194.433865] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [194.433868] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [194.433871] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [194.434028] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [194.434047] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [194.434067] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [194.434087] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [194.434834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.434999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [194.435495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [194.436247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [194.436404] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [194.436554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [194.437189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.437673] [drm:drm_client_modeset_probe]

<7> [194.437912] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [194.437950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [194.438155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.438879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.439045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [194.439060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [194.439072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [194.439196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.439672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [194.440222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [194.440814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [194.442376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [194.442856] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [194.443186] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [194.443701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [194.444461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [194.444648] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [194.444900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [194.445555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.446080] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [194.446098] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [194.446110] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [194.446237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.447474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.447647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [194.448361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.448885] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.448891] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [194.449032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [194.479126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.479132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [194.479251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.479388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [194.479403] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [194.479409] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [194.479412] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [194.479414] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [194.479488] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [194.479499] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [194.479523] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [194.479541] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [194.479543] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [194.479609] [drm:drm_client_modeset_probe]

<7> [194.479560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [194.479794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.480441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.480582] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [194.480596] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [194.480619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [194.480875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.481400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.481609] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [194.481629] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [194.481647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [194.481844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.482371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [194.482890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [194.483449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [194.484785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [194.485788] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [194.486576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [194.486733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [194.486882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [194.487045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [194.487642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.487794] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [194.487814] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [194.487831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [194.487979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.489080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.489223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [194.489908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.490385] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.490389] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [194.490505] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [194.515130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.515135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [194.515251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.515386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [194.515399] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [194.515402] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [194.515404] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [194.515407] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [194.515436] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [194.515443] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [194.515458] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [194.515471] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [194.515541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [194.515558] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [194.515698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.516255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [194.516773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [194.517338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [194.518785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [194.519780] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [194.520394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [194.520667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [194.520846] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [194.521038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [194.521618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.521761] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [194.521874] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [194.521899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [194.522020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.523779] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.523905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [194.524596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.525114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.525132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [194.525317] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [194.547741] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.547753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [194.547934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.548069] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [194.550536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [194.550552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [194.550679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.551164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.551322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [194.551827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [194.551841] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [194.551999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.552458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [194.552990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [194.553550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [194.554779] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [194.555785] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [194.556567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [194.556719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [194.556954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [194.557124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [194.557703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.557850] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [194.558332] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [194.558344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [194.558476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.559525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.559643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [194.560350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.560876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.560880] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [194.561006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [194.583920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.583924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [194.584039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.584173] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [194.584474] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [194.584486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [194.584608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.585075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.585274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [194.585298] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [194.585309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [194.585431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.585917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [194.586411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [194.586979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [194.588113] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [194.589216] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [194.589946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [194.590106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [194.590237] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [194.590364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [194.590975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.591122] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [194.591148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [194.591159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [194.591279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.592349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.592465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [194.593652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [194.594162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.594166] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [194.594296] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [194.617734] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [194.617739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [194.617898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.618097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [204.675879] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [204.683444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [205.671910] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [205.678596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [205.679267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [205.679654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.680120] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [205.680849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.681577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [205.682154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.682501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [205.683359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [205.684128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [205.684277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [205.684415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [205.685047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.685234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [205.685840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [205.685982] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [205.687459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [205.711097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [205.716167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [205.716372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.716914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [205.717484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [205.718059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [205.719799] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [205.720950] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [205.721630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [205.721975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [205.722133] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [205.722261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [205.722854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.723114] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [205.723133] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [205.723257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.724486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [205.724612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [205.725291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [205.725806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [205.725813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.725983] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [205.750634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [205.750639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [205.750779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.750976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [205.751004] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [205.753769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [205.778191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [205.783551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [205.783704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.783860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [205.784329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [205.784963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [205.785167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [205.785310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [205.785910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.786089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [205.787664] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [205.787774] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [205.789793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [205.814246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [205.819185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [205.819317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.819837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.820019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [205.820042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [205.820198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.820745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [205.821259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [205.821831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [205.823205] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [205.824123] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [205.824796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [205.825008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [205.825193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [205.825375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [205.826034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.826229] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [205.826259] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [205.830008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [205.854471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [205.859108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [205.859260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.859398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [205.859852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [205.860422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [205.860562] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [205.860698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [205.861295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.861447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [205.862437] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [205.863792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [205.888198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [205.892784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [205.892909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.894008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [205.894141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [205.894852] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [205.895333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [205.895338] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.895474] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [205.924987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [205.924992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [205.925121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.925256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [205.925279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [205.925399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.925922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.926099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [205.926113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [205.926234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.926699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [205.927231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [205.927806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [205.928964] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [205.929781] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [205.930567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [205.930720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [205.930880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [205.931072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [205.931652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.931817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [205.931859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [205.931992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [205.933573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [205.933687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [205.934368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [205.934929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [205.934932] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.935086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [205.960752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [205.960756] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [205.960897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [205.961029] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [205.961044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [205.963416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [206.194825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [206.200279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [206.200906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [206.201119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [206.201802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [206.202254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [206.202257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [206.202313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [206.202788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [206.203471] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [206.204195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [206.204717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [206.205108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [206.205476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [206.205868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [206.207178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [206.208014] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [206.208660] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [206.208722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [206.209383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [206.209673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [206.210262] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [206.210590] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [206.210602] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [206.210931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [206.215677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [206.215689] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [206.216008] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [206.239046] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [206.298383] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [206.674508] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload