Results for igt@i915_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-gc2d8ef8b9 (x86_64) (Linux: 6.4.0-rc5-linus-v6.4-rc5-g9561de3a55be+ x86_64)
Out 
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 0
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x76/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_atomic_commit_tail+0xa2d/0xd10 [i915]
   intel_atomic_commit+0x380/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1e9/0x740
Wakeref count: 0
Subtest basic-rte: SUCCESS (11.861s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 0
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x76/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_atomic_commit_tail+0xa2d/0xd10 [i915]
   intel_atomic_commit+0x380/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1e9/0x740
Wakeref count: 0
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (11.861s)
Dmesg
<6> [100.828292] Console: switching to colour dummy device 80x25
<6> [100.828356] [IGT] i915_pm_rpm: executing
<6> [100.833178] [IGT] i915_pm_rpm: starting subtest basic-rte
<7> [100.833268] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [100.833764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [100.833787] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [100.833955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.835110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [100.835244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [100.835836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [100.836355] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [100.836362] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.836492] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [100.852248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [100.852253] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [100.852374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.852515] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [100.852599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [100.852610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [100.852740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.853383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.853502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.853801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.854234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.854239] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.854365] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.868506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.868511] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.868630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.868771] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [100.868824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [100.868835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [100.868963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.869411] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.869562] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [100.873642] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [100.873657] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [100.873791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.874445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [100.874564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [100.875168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [100.875657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [100.875661] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.875780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [100.890432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [100.890437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [100.890556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.890696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [100.891278] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [100.891292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [100.891423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.892054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.892187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.892500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.892919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.892923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.893041] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.907679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.907684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.907799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.907937] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [100.908452] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [100.908466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [100.908596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.909029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.909187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [100.909556] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [100.909568] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [100.909694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.910704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [100.910823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [100.911419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [100.911917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [100.911921] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.912036] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [100.926207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [100.926212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [100.926341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.926478] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [100.926505] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [100.926516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [100.926641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.927670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.927789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.928388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.928885] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.928889] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.929007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.943161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.943166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.943285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.943425] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [100.943453] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [100.943464] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [100.943594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.944025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.944189] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [112.004813] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.007020] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.015282] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.038287] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.044168] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.044766] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.045290] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.045653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.046246] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [112.047251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.047472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.047883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.048449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.048461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.048695] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.063336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.063341] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.063462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.063610] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.063739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.063875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.064323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.064841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.064978] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.065110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.065692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.065853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.066501] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [112.066840] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.070186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.094571] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.099735] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.100258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.100409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.100543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.100974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.101542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.101688] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.101830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.102418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.102579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.103582] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [112.103587] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.104029] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.107189] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.131625] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.136934] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.137478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.137669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.138723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.138874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.139518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.139998] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.140004] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.140163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.154397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.154404] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.154557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.154743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.154764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.154926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.155408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.155766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.155752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.155926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.156385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.156926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.157097] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.157281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.157890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.158088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.159098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.159590] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.163363] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.187747] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.193273] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.193763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.193882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.194544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.194667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.195271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.195765] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.195770] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.195888] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.210043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.210049] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.210200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.210377] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.210393] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.210522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.211176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.211344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.211649] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.212072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.212076] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.212209] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.227429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.227435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.227565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.227707] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.227721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.227850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.228319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.228489] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.228508] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.228639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.229278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.229406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.229998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.230521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.230526] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.230669] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.245283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.245289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.245412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.245557] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.245571] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.245712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.246370] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.246488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.246790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.247217] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.247222] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.247366] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.261550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.261555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.261675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.261821] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.261835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.261966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.262409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.262579] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.262595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.263580] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.267159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.359289] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [112.371893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.389041] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.390041] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.390627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.390811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.391287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.391832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.391981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.392123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.392719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.393025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.393549] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [112.394113] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.397187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.421597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.426135] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.426687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.426901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.427097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.427582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.428202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.428433] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.428646] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.429321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.429562] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.430277] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [112.430569] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.431119] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.435187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.459638] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.466474] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.467023] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.467217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.468328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.468550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.468930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.469449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.469459] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.469668] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.484921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.484930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.485113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.485370] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.485395] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.485588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.486714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.486929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.487613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.488111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.488120] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.488350] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.503112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.503117] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.503263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.503420] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.503437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.503582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.504042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.504232] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.504258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.504393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.505051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.505209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.505521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.505987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.505993] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.506120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.520340] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.520345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.520465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.520613] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.520627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.520757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.521400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.521528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.521830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.522262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.522266] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.522382] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.536989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.536995] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.537116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.537277] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.537299] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.538282] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.541949] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.566401] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.571166] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.571695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.571846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.571977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.572405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.572939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.573093] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.573242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.573807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.573954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.574373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.574934] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.578189] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.602573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.608966] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.609488] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.609633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.610112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.610328] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.610632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.610803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.611861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.612059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.612735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.613259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.613265] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.613415] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.628622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.628629] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.628783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.628964] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.628982] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.629141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.630223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.630432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.631063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.631571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.631579] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.631763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.647000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.647006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.647124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.647322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.647336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.647468] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.647921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.648109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.648130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.649155] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.652505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.686826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.692514] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.693083] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.693239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.693400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.693642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.694707] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [112.694964] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [112.694959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.695381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.695547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.695894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.696059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.696064] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.696226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.699142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.699159] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.699306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.699465] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.699621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.700218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.700391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.700418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.700595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.701706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.701846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.702197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.702692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.702700] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.702843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.718019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.718025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.718165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.718319] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.718618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.718761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.719197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.719784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.719940] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.720081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.720689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.720851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.721885] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [112.721868] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.721888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.725156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.749502] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.755220] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.755715] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.755838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.756294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.756450] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.756471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.756630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.757688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.757808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.758115] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.758595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.758601] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.758739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.772921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.772926] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.773047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.773209] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.773232] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.774216] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.776580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.801058] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.806270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.806837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.806995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.807144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.807584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.808134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.808297] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.808463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.809034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.809264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.809451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.810481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.810655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.810982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.811468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.811475] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.811637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.825803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.825809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.825944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.826096] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.826112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.826280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.826725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.826918] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.826947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.827131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.827792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.827955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.828603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.829095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.829101] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.829272] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.843933] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.843939] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.844060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.844217] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.844232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.844362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.845394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.845557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.846174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.846664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.846670] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.846829] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.861468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.861473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.861597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.861741] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.861756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.861883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.862327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.862470] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.862486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.863471] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [112.867120] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.922276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.930896] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [112.931536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.931940] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.932233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.932814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.933449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.933736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.933982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.934690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.935582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [112.935820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<6> [112.936509] [IGT] i915_pm_rpm: exiting, ret=0
<7> [112.936987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.937250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [112.937688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [112.938233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.938245] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.938516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.954380] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.954388] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.954607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.954882] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6
<7> [112.955002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [112.955253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.956465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.956694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.957067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.957577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.957584] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.957786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.973011] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.973015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.973161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.973344] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [112.973361] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [112.973505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.973952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.974111] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [112.974385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.974547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.975017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.975690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.975837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.975978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.976615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [112.977153] Console: switching to colour frame buffer device 128x48
<7> [112.977652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.977793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.978287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.978842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.978988] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.979165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.979776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2023-06-05 22:57:30