Results for igt@i915_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-gc2d8ef8b9 (x86_64) (Linux: 6.4.0-rc5-linus-v6.4-rc5-g9561de3a55be+ x86_64)
Out 
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: yes
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1e9/0x740
   drm_ioctl_kernel+0xb4/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x76/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_atomic_commit_tail+0xa2d/0xd10 [i915]
   intel_atomic_commit+0x380/0x400 [i915]
   drm_atomic_commit+0x92/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1e9/0x740
Wakeref count: 0
Subtest basic-rte: SUCCESS (1.663s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   intel_digital_port_connected+0x2e/0x80 [i915]
   intel_dp_detect+0x27f/0x640 [i915]
   drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_display_power_flush_work+0xdf/0xf0 [i915]
   intel_dp_detect+0x231/0x640 [i915]
   drm_helper_probe_detect_ctx+0x42/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
Wakeref count: 1
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   __intel_display_power_put_async+0x38/0x120 [i915]
   __gt_park+0x15e/0x220 [i915]
   ____intel_wakeref_put_last+0x1f/0x70 [i915]
   intel_gt_pm_debugfs_forcewake_user_release+0x76/0x80 [i915]
   i915_forcewake_release+0x28/0x40 [i915]
   full_proxy_release+0x36/0xa0
   __fput+0x95/0x260
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (1.663s)
Dmesg
<6> [146.694238] Console: switching to colour dummy device 80x25
<6> [146.694272] [IGT] i915_pm_rpm: executing
<6> [146.696734] [IGT] i915_pm_rpm: starting subtest basic-rte
<7> [146.696774] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [146.697202] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]
<7> [146.697219] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [146.697351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.697680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.697810] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected
<7> [146.697885] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]
<7> [146.697896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [146.698006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.698348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.698480] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [146.698538] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]
<7> [146.698547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [146.698658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.698993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.699113] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected
<7> [146.699183] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]
<7> [146.699195] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [146.699299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.699630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.699755] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected
<7> [146.705652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]
<7> [146.705665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [146.705799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.706125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.706268] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected
<7> [146.706638] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]
<7> [146.706647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [146.706756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.707080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.707215] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [146.707578] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]
<7> [146.707587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [146.707700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.708036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.708178] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected
<7> [146.708551] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]
<7> [146.708561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [146.708673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.709001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.709120] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected
<7> [146.709599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]
<7> [146.709610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [146.709719] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.710036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.710167] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected
<7> [146.710188] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]
<7> [146.710197] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [146.710298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.710615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.710735] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [146.710755] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]
<7> [146.710764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [146.710874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.711214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.711337] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected
<7> [146.711357] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]
<7> [146.711366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [146.711473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [146.711800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [146.711925] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected
<7> [147.712812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [147.717357] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [147.718807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.718974] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.719096] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.719223] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.719360] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.719576] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [147.719819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [147.719984] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.720160] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [147.720281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [147.720440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [147.744405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [147.744854] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [147.745473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [147.746013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [147.746785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [147.747324] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [147.747724] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [147.748248] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [147.751901] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.752114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.755334] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [147.755952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [147.756307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [147.756427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.756855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.756982] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1
<7> [147.756998] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [147.757106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.757486] [drm:drm_mode_setcrtc] [CRTC:80:pipe A]
<7> [147.757472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.757603] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6
<7> [147.757618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [147.757731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.758074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.758216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1
<7> [147.758230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [147.758342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.758677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.758802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1
<7> [147.758817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [147.759311] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [147.759876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.760227] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.760365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.760500] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.760633] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.760841] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [147.761081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [147.761254] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.761417] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [147.761535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [147.761682] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [147.785769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [147.785949] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [147.786166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [147.786380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [147.786770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [147.787008] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [147.787193] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [147.787634] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [147.789448] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.789588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.792712] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [147.793359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [147.793561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.793701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [147.794004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.794182] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.794347] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.794500] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.794651] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.794806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [147.794949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.795083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.795542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.795694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [147.796220] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [147.797094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.797260] [drm:drm_mode_setcrtc] [CRTC:131:pipe B]
<7> [147.797275] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.797443] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.797602] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.797751] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.797990] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [147.798289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [147.798471] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.798656] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [147.798794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [147.798959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [147.823887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [147.824165] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [147.824427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [147.824693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [147.825135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [147.825420] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [147.825634] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [147.825925] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [147.827822] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.827960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.831067] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [147.831682] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [147.831864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.832004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [147.832319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.832491] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.832652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.832807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.832957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.833108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [147.833343] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.833480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.833918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.834209] [drm:drm_mode_setcrtc] [CRTC:182:pipe C]
<7> [147.834187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [147.834359] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [147.834673] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [147.835529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.835687] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.835827] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.835962] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.836093] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.836308] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [147.836566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [147.836728] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.836889] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [147.837005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [147.837161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [147.861895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [147.862096] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [147.862361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [147.862610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [147.863057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [147.863345] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [147.863563] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [147.863870] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [147.865783] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.865922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.869065] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [147.869685] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [147.869826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.870184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.870339] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1
<7> [147.870364] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [147.870509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.870860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.871010] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6
<7> [147.871115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.871287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [147.871587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.871741] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.871878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.872010] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.872137] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.872287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [147.872410] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.872525] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.872956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.873092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [147.873217] [drm:drm_mode_setcrtc] [CRTC:233:pipe D]
<7> [147.873477] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [147.873631] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [147.874526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.874682] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.874821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.874954] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.875083] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.875297] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [147.875560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [147.875716] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.875876] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [147.875991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [147.876135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [147.900891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [147.901041] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [147.901239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [147.901434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [147.901808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [147.902024] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [147.902192] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [147.902443] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [147.904210] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.904348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.907480] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [147.908093] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [147.908243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.908616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.908769] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1
<7> [147.908803] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [147.908940] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.909305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.909456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1
<7> [147.909487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [147.909934] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [147.910839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.911011] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.911178] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.911334] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.911484] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.911722] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [147.911989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [147.912177] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.912368] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [147.912504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [147.912668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [147.937474] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [147.937646] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [147.937849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [147.938075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [147.938507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [147.938762] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [147.938951] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [147.939228] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [147.941331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.941472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.944573] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [147.945137] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [147.945289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.945444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [147.945751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.945901] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.946037] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.946178] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.946313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.946440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [147.946568] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.946682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.947113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.947257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [147.947796] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [147.947866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [147.948676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.948833] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.948974] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.949108] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.949253] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.949459] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [147.949740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [147.949901] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.950059] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [147.950200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [147.950385] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [147.975219] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [147.975420] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [147.975655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [147.975902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [147.976369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [147.976653] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [147.976876] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [147.977186] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [147.979295] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [147.979445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [147.982206] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [147.982689] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [147.982830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.983186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.983340] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1
<7> [147.983362] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [147.983512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.983870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.984015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6
<7> [147.984030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [147.984175] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.984536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.984680] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1
<7> [147.984698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [147.984831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.985193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.985342] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1
<7> [147.985365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [147.985497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.985831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.985971] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1
<7> [147.985986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [147.986117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.986472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.986613] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6
<7> [147.986627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [147.986765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.987117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.987265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1
<7> [147.987280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [147.987410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [147.987763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [147.987903] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1
<7> [147.987919] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [147.988411] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [147.989281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [147.989457] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.989616] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [147.989769] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.989917] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [147.990160] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [147.990459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [147.990643] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [147.990824] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [147.990958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [147.991124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [148.051420] [drm:drm_mode_setcrtc] [CRTC:80:pipe A]
<7> [148.064754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [148.065601] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [148.066593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [148.067551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [148.068754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [148.069747] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [148.070166] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [148.070396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [148.072117] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.072261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.075430] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [148.076091] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [148.076424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.076708] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.077163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.077708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.077977] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.078233] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.078467] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.078699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.078917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.079108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.079675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.079849] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [148.080262] [drm:drm_mode_setcrtc] [CRTC:131:pipe B]
<7> [148.080290] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [148.080344] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [148.080917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.081270] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.081413] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.081547] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.081675] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.081885] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [148.082125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [148.082294] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.082455] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [148.082578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [148.082889] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [148.107621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [148.107850] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [148.108125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [148.108444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [148.108921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [148.109255] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [148.109501] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [148.109842] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [148.112083] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.112249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.115370] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [148.115974] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [148.116115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.116464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.116622] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1
<7> [148.116648] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [148.116794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.117136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.117314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6
<7> [148.117339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [148.117823] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [148.118686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.118861] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.119019] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.119181] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.119332] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.119572] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [148.119841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [148.120020] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.120214] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [148.120353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [148.120517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [148.145326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [148.145448] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [148.145579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [148.145727] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [148.146026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [148.146220] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [148.146346] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [148.146553] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [148.148212] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.148334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.151437] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [148.152047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [148.152202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.152341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.152636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.152789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.152931] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.153069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.153211] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.153346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.153473] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.153595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.154030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.154163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [148.154682] [drm:drm_mode_setcrtc] [CRTC:182:pipe C]
<7> [148.154717] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [148.155591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.155748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.155891] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.156030] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.156175] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.156387] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [148.156635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [148.156798] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.156966] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [148.157091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [148.157248] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [148.181610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [148.181735] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [148.181881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [148.182045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [148.182377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [148.182568] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [148.182708] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [148.182924] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [148.184592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.184716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.187803] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [148.188396] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [148.188539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.188697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.189001] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.189163] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.189308] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.189443] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.189582] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.189713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.189837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.189960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.190398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.190532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [148.191038] [drm:drm_mode_setcrtc] [CRTC:233:pipe D]
<7> [148.191076] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [148.191081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [148.191635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.191975] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.192119] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.192270] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.192409] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.192621] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [148.192867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [148.193029] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.193199] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [148.193326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [148.193474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [148.218328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [148.218507] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [148.218724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [148.218955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [148.219404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [148.219673] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [148.219880] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [148.220171] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [148.222049] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.222195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.225318] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [148.225932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [148.226072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.226452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.226605] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1
<7> [148.226639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [148.226780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.227159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.227313] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1
<7> [148.227401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.227546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.227842] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.227997] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.228141] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.228290] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.228425] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.228558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.228684] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.228809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.229253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.229388] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [148.229924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [148.229930] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [148.230801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.230962] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.231106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.231251] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.231389] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.231605] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [148.231850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [148.232015] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.232188] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [148.232309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [148.232453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [148.257286] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [148.257436] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [148.257613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [148.257808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [148.258209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [148.258442] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [148.258615] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [148.258870] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [148.260733] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.260870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.263982] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [148.264623] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [148.264767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.265112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.265273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1
<7> [148.265291] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [148.265432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.265783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.265928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6
<7> [148.265944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [148.266079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.266446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.266589] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1
<7> [148.266605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [148.266738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.267092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.267244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1
<7> [148.267265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [148.267398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.267732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.267873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1
<7> [148.267888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [148.268018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.268370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.268511] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6
<7> [148.268526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [148.268656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.269009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.269158] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1
<7> [148.269173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [148.269307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.269658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.269797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1
<7> [148.269814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [148.270292] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [148.271168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.271350] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.271506] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.271657] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.271805] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.272042] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [148.272352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [148.272530] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.272710] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [148.272845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [148.273008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [148.345341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [148.346096] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [148.347096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [148.348504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [148.349650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [148.350595] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [148.350983] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [148.351217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [148.352838] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.352954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.356148] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [148.356778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [148.357118] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [148.357274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.357671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.357806] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1
<7> [148.357824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [148.357961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.358308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.358433] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6
<7> [148.358446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [148.358555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.358887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.359015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1
<7> [148.359027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [148.359135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.359600] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1
<7> [148.360130] [drm:drm_mode_setcrtc] [CRTC:80:pipe A]
<7> [148.360237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.360586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.360740] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.360875] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.361009] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.361140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.361279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.361401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.361515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.361985] [drm:drm_mode_setcrtc] [CRTC:131:pipe B]
<7> [148.362055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.362464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.362615] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.362750] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.362881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.363006] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.363130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.363266] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.363383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.363849] [drm:drm_mode_setcrtc] [CRTC:182:pipe C]
<7> [148.363915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.364341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.364488] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.364623] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.364754] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.364881] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.365004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.365124] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.365253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.365721] [drm:drm_mode_setcrtc] [CRTC:233:pipe D]
<7> [148.365784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.366213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.366359] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.366493] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.366624] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.366753] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.366870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.366987] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.367102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.465550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.468234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [148.469707] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [148.471403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.471819] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.471987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.472154] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.472311] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.472555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [148.472832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [148.473018] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.473215] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [148.473357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [148.473527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [148.584822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [148.586008] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [148.587224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [148.588193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [148.589451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [148.590453] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [148.591227] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [148.592031] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [148.594643] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.594766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.598331] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [148.598996] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [148.599226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.599379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.599673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.599829] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.599965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.600101] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.600248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.600386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.600510] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.600624] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.601057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.601460] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [148.601581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.601908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.602035] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:236:DP-1] Same epoch counter 1
<7> [148.602049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [148.602168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.602495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.602624] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] Same epoch counter 6
<7> [148.602637] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [148.602747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.603082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.603219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:255:DP-2] Same epoch counter 1
<7> [148.603231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [148.603341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.603675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [148.603802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:264:DP-3] Same epoch counter 1
<6> [148.603875] [IGT] i915_pm_rpm: exiting, ret=0
<7> [148.604704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.604836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.605121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.605282] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.605418] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.605551] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.605681] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.605816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.605938] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.606054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.606494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [148.606728] Console: switching to colour frame buffer device 128x48
<7> [148.607016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [148.607133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [148.607428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [148.607580] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.607716] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [148.607849] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [148.607983] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [148.608117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [148.608251] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [148.608367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [148.608799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2023-06-05 22:57:29