igt@core_hotunplug@unbind-rebind on bat-adlm-1@linus-v6.4-rc5 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gc2d8ef8b9 (x86_64) (Linux: 6.4.0-rc5-linus-v6.4-rc5-g9561de3a55be+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: unbind-rebind Opened device: /dev/dri/renderD128 Unloaded audio driver snd_hda_intel Realoading snd_hda_intel Subtest unbind-rebind: SUCCESS (1.861s)
Err	Starting subtest: unbind-rebind Subtest unbind-rebind: SUCCESS (1.861s)
Dmesg	<6> [150.350057] Console: switching to colour dummy device 80x25 <6> [150.350140] [IGT] core_hotunplug: executing <7> [150.354088] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [150.355112] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [150.355488] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [150.356749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [150.360806] [IGT] core_hotunplug: closing selected device instance <7> [150.361214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [150.361593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [150.361789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.361961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [150.362127] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.362308] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [150.362488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [150.362648] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [150.362794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6> [150.363532] [IGT] core_hotunplug: starting subtest unbind-rebind <7> [150.371136] [IGT] core_hotunplug: reopening DRM device for health check <7> [150.371179] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [150.371600] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [150.375175] [IGT] core_hotunplug: running device sysfs healthcheck <7> [150.375268] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [150.375491] [IGT] core_hotunplug: closing health checked device instance <7> [150.376689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [150.377033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [150.377587] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.377753] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [150.377914] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.378070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [150.378248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [150.378400] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [150.378547] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [150.379178] [IGT] core_hotunplug: reopening render device for health check <7> [150.379211] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [150.379603] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [150.382962] [IGT] core_hotunplug: running device sysfs healthcheck <7> [150.383122] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [150.383381] [IGT] core_hotunplug: closing health checked device instance <7> [150.383733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [150.384065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [150.384815] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.384987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [150.385156] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.385313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [150.385483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [150.385627] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [150.385767] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [150.441734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [150.442190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [150.442417] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.442591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [150.442757] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.442921] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [150.443072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [150.443291] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [150.456973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [150.457181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [150.457348] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [150.457495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [150.487739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [150.488492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [150.489180] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.489607] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [150.489990] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.490373] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [150.490699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [150.491016] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [150.504877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [150.505201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [150.505488] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [150.505746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [150.554582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [150.554975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [150.555639] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.556001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [150.556496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.556779] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [150.557093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [150.557388] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [150.575872] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [150.576059] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [150.576244] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [150.576393] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [150.576531] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [150.576669] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [150.576807] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [150.576942] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [150.577076] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [150.577222] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [150.577354] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [150.577491] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [150.577625] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [150.577763] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [150.577896] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [150.578030] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [150.578173] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [150.578308] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [150.578443] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [150.578576] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [150.578711] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [150.578843] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [150.578971] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [150.579096] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [150.579244] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [150.579377] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [150.579509] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [150.579640] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [150.579767] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [150.579896] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [150.580026] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [150.580159] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [150.580291] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [150.580419] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [150.580552] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [150.580684] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [150.581622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [150.581777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [150.581921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [150.582055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [150.656499] [IGT] core_hotunplug: unbinding the driver from the device <7> [150.656904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [150.658353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [150.659322] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.659933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [150.660524] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.661027] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [150.661513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [150.661971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [150.662563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7> [150.662943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7> [150.663303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7> [150.692472] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [150.756301] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [150.756898] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [150.859329] [IGT] core_hotunplug: rebinding the driver to the device <7> [150.860386] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7> [150.860554] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7> [150.860705] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH <7> [150.860857] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [150.861228] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 19200 kHz <7> [150.861358] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7> [150.861473] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <7> [150.861879] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [150.862004] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [150.862114] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [150.862242] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [150.862271] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [150.862551] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [150.862565] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000050200087 <7> [150.862701] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [150.863250] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x44a07018 <7> [150.863399] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [150.863515] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [150.863625] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [150.863731] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [150.863854] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [150.863968] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4 <7> [150.864080] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [150.864219] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2401 tRP=24 tRDPRE=20 tRAS=52 tRCD=24 tRC=76 <7> [150.864361] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=4801 tRP=44 tRDPRE=28 tRAS=104 tRCD=44 tRC=148 <7> [150.864511] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160 <7> [150.864640] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160 <7> [150.864766] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32 <7> [150.864884] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=39 <7> [150.865007] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=48 <7> [150.865126] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=16956 <7> [150.865258] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=23981 <7> [150.865389] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=24772 <7> [150.865511] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=24772 <7> [150.865630] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133 <7> [150.865751] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=41600 <7> [150.865868] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=51200 <7> [150.865990] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21855 <7> [150.866114] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=4 deratedbw=34500 <7> [150.866300] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=4 deratedbw=36108 <7> [150.866422] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=4 deratedbw=36108 <7> [150.866543] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133 <7> [150.866666] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=41600 <7> [150.866786] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=51200 <7> [150.866907] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=25544 <7> [150.867028] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 <7> [150.867159] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 <7> [150.867280] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 <7> [150.867404] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133 <7> [150.867526] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=41600 <7> [150.867645] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=51200 <7> [150.867767] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=27900 <7> [150.867891] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 <7> [150.868016] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 <7> [150.868137] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 <7> [150.868274] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133 <7> [150.868395] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=41600 <7> [150.868520] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=51200 <7> [150.868640] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=29248 <7> [150.868760] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 <7> [150.868882] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 <7> [150.869003] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 <7> [150.869127] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133 <7> [150.869263] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=41600 <7> [150.869384] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=51200 <7> [150.869507] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=29972 <7> [150.869626] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 <7> [150.869746] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 <7> [150.869868] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 <7> [150.869986] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133 <7> [150.870102] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=41600 <7> [150.870236] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=51200 <7> [150.870948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [150.871093] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 251 <7> [150.871260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7> [150.871400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7> [150.871533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [150.871663] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [150.871789] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7> [150.871918] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7> [150.872043] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [150.872189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [150.872319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7> [150.872448] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7> [150.872571] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7> [150.872701] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [150.872826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [150.872953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [150.873074] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [150.873212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 251 not known; assuming 39 <7> [150.873341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [150.873469] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [150.873592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [150.873715] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [150.873839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [150.873960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [150.874084] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [150.874224] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [150.874342] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [150.874463] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [150.874581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7> [150.874698] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [150.874818] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [150.874940] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7> [150.875073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [150.875282] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.875427] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [150.875571] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.875709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [150.875834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [150.875971] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [150.876104] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [150.876312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [150.876438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [150.876565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [150.876722] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.876865] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [150.877006] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [150.877154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [150.877278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [150.877412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [150.877540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7> [150.877667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7> [150.877795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7> [150.878004] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adlp_dmc.bin <7> [150.879341] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [150.880649] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 35 us <7> [150.880867] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec) <7> [150.881045] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 54 (54.0 usec) <7> [150.881229] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 83 (83.0 usec) <7> [150.881395] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 106 (106.0 usec) <7> [150.881556] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 168 (168.0 usec) <7> [150.881714] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 168 (168.0 usec) <6> [150.882244] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.19) <7> [150.884682] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 4 display pipes available. <7> [150.887921] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [150.888178] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [150.888381] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <7> [150.888527] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7> [150.888720] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 1305600 kHz <7> [150.888936] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7> [150.889120] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7> [150.889350] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [150.889541] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [150.889725] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [150.889913] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [150.890093] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [150.890283] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [150.890467] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [150.890647] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [150.890826] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [150.891035] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7> [150.891473] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [150.891634] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [150.891791] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [150.891949] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [150.892104] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [150.892425] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [150.892655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [150.893238] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7> [150.893437] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [150.893723] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [150.893911] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [150.894207] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [150.894392] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [151.124155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.153155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.182155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.211153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.239155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.268155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.296155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.325157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.354156] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.383157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.412158] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.441156] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.470158] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.498160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.527157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.556159] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.585157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.614158] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.643160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.672160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.701160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.730160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.759160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.788162] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.817162] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.846161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.875161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.904161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.932161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.961161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [151.990161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [152.018161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [152.018423] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [152.018482] i915 0000:00:02.0: [drm] [ENCODER:235:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [152.018584] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7> [152.018965] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [152.019265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [152.020022] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI B/PHY B] using AUX B (VBT) <7> [152.020312] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:235:DDI B/PHY B] <7> [152.021007] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:235:DDI B/PHY B] <7> [152.021244] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:235:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [152.021557] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:254:DDI TC1/PHY TC1] using AUX D (VBT) <7> [152.022093] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [152.022400] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:254:DDI TC1/PHY TC1] <7> [152.022798] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:263:DDI TC2/PHY TC2] using AUX E (VBT) <7> [152.023217] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [152.023483] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:263:DDI TC2/PHY TC2] <7> [152.023842] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port F is not present <7> [152.024053] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port G is not present <7> [152.024679] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled <7> [152.025011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7> [152.025347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7> [152.025656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7> [152.025846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [152.026049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7> [152.026256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7> [152.026463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7> [152.026659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7> [152.026856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7> [152.027048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7> [152.027258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7> [152.027449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7> [152.027633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7> [152.027828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7> [152.028024] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7> [152.028231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7> [152.028424] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7> [152.028620] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7> [152.028811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7> [152.028995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7> [152.029192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7> [152.029387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7> [152.029581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7> [152.029773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7> [152.029964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7> [152.030167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7> [152.030368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7> [152.030564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A <7> [152.030754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:237:DP-MST A] hw state readout: disabled, pipe A <7> [152.030937] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DP-MST B] hw state readout: disabled, pipe B <7> [152.031125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:239:DP-MST C] hw state readout: disabled, pipe C <7> [152.031328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DP-MST D] hw state readout: disabled, pipe D <7> [152.031552] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7> [152.031741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [152.031931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:256:DP-MST A] hw state readout: disabled, pipe A <7> [152.032113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:257:DP-MST B] hw state readout: disabled, pipe B <7> [152.032317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:258:DP-MST C] hw state readout: disabled, pipe C <7> [152.032501] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:259:DP-MST D] hw state readout: disabled, pipe D <7> [152.032696] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7> [152.032884] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:263:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [152.033075] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST A] hw state readout: disabled, pipe A <7> [152.033276] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST B] hw state readout: disabled, pipe B <7> [152.033462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST C] hw state readout: disabled, pipe C <7> [152.033639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DP-MST D] hw state readout: disabled, pipe D <7> [152.033831] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [152.034033] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [152.034245] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 0 <7> [152.034457] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [152.034661] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [152.034863] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [152.035064] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [152.035418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:DP-1] hw state readout: disabled <7> [152.035634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:249:HDMI-A-1] hw state readout: disabled <7> [152.035845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:255:DP-2] hw state readout: disabled <7> [152.036046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:264:DP-3] hw state readout: disabled <7> [152.036240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [152.036422] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7> [152.036608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7> [152.036793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7> [152.036978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7> [152.037179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7> [152.037374] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [152.037596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7> [152.037808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7> [152.038000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7> [152.038212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7> [152.038411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7> [152.038607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7> [152.038796] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [152.039013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7> [152.039227] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7> [152.039435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7> [152.039636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7> [152.039830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7> [152.040029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7> [152.040234] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [152.040457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7> [152.040651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7> [152.040844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7> [152.041040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7> [152.041246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7> [152.041444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7> [152.041629] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7> [152.041919] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state] <7> [152.042131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7> [152.042350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7> [152.042560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7> [152.042779] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [152.042973] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [152.043172] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [152.043361] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [152.057620] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K) <7> [152.057872] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [152.058077] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [152.058323] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [152.058340] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7> [152.059469] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0 <7> [152.059697] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [152.059915] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7> [152.061200] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7> [152.061425] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0 <7> [152.061644] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0 <7> [152.062178] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7> [152.062400] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0 <7> [152.062915] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7> [152.063122] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2 <7> [152.063857] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7> [152.064067] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0 <7> [152.066235] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [152.066527] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset <7> [152.096767] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f <7> [152.096993] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000 <7> [152.097228] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7> [152.097438] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [152.097645] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8 <7> [152.097855] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x46aa000c <7> [152.098063] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [152.098277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [152.098488] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [152.098692] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [152.098899] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [152.099100] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [152.099315] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [152.099520] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [152.099721] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [152.101829] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1 <6> [152.101834] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 <7> [152.122430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 18ms, freq = 850MHz, before = 850MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [152.123481] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [152.125271] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [152.126241] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [152.126246] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6> [152.127001] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7> [152.135205] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping <7> [152.135418] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7> [152.135600] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7> [152.135770] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7> [152.135940] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [152.136137] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [152.136874] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [152.137063] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [152.137267] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [152.137447] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7> [152.137626] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [152.142503] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [152.144120] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:DP-1] generating connector hotplug event <7> [152.144787] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:249:HDMI-A-1] generating connector hotplug event <7> [152.145405] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7> [152.146780] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:255:DP-2] generating connector hotplug event <7> [152.147399] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-3 <7> [152.148414] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:264:DP-3] generating connector hotplug event <6> [152.148496] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [152.152191] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [152.173169] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [152.179854] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [152.181870] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [152.182161] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=448 <7> [152.182793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [152.182914] [drm:drm_client_modeset_probe] <7> [152.182986] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [152.183021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [152.183416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7> [152.183513] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [152.183731] i915 device info: pciid=0x46aa rev=0x0c platform=ALDERLAKE_P (subplatform=0x0) gen=12 <7> [152.183736] i915 device info: graphics version: 12 <7> [152.183738] i915 device info: media version: 12 <7> [152.183741] i915 device info: display version: 13 <7> [152.183743] i915 device info: graphics stepping: C0 <7> [152.183746] i915 device info: media stepping: C0 <7> [152.183748] i915 device info: display stepping: D0 <7> [152.183750] i915 device info: base die stepping: ** <7> [152.183752] i915 device info: gt: 0 <7> [152.183754] i915 device info: memory-regions: 0x21 <7> [152.183757] i915 device info: page-sizes: 0x211000 <7> [152.183759] i915 device info: platform: ALDERLAKE_P <7> [152.183761] i915 device info: ppgtt-size: 48 <7> [152.183763] i915 device info: ppgtt-type: 2 <7> [152.183765] i915 device info: dma_mask_size: 39 <7> [152.183768] i915 device info: is_mobile: no <7> [152.183770] i915 device info: is_lp: no <7> [152.183772] i915 device info: require_force_probe: no <7> [152.183774] i915 device info: is_dgfx: no <7> [152.183776] i915 device info: has_64bit_reloc: yes <7> [152.183778] i915 device info: has_64k_pages: no <7> [152.183780] i915 device info: gpu_reset_clobbers_display: no <7> [152.183782] i915 device info: has_reset_engine: yes <7> [152.183785] i915 device info: has_3d_pipeline: yes <7> [152.183787] i915 device info: has_4tile: no <7> [152.183789] i915 device info: has_flat_ccs: no <7> [152.183791] i915 device info: has_global_mocs: yes <7> [152.183793] i915 device info: has_gmd_id: no <7> [152.183795] i915 device info: has_gt_uc: yes <7> [152.183797] i915 device info: has_heci_pxp: no <7> [152.183799] i915 device info: has_heci_gscfi: no <7> [152.183801] i915 device info: has_guc_deprivilege: no <7> [152.183803] i915 device info: has_l3_ccs_read: no <7> [152.183805] i915 device info: has_l3_dpf: no <7> [152.183807] i915 device info: has_llc: yes <7> [152.183809] i915 device info: has_logical_ring_contexts: yes <7> [152.183811] i915 device info: has_logical_ring_elsq: yes <7> [152.183813] i915 device info: has_media_ratio_mode: no <7> [152.183816] i915 device info: has_mslice_steering: no <7> [152.183818] i915 device info: has_oa_bpc_reporting: no <7> [152.183820] i915 device info: has_oa_slice_contrib_limits: no <7> [152.183822] i915 device info: has_oam: no <7> [152.183824] i915 device info: has_one_eu_per_fuse_bit: no <7> [152.183826] i915 device info: has_pxp: yes <7> [152.183828] i915 device info: has_rc6: yes <7> [152.183830] i915 device info: has_rc6p: no <7> [152.183832] i915 device info: has_rps: yes <7> [152.183834] i915 device info: has_runtime_pm: yes <7> [152.183836] i915 device info: has_snoop: no <7> [152.183838] i915 device info: has_coherent_ggtt: no <7> [152.183841] i915 device info: tuning_thread_rr_after_dep: no <7> [152.183843] i915 device info: unfenced_needs_alignment: no <7> [152.183845] i915 device info: hws_needs_physical: no <7> [152.183847] i915 device info: has_pooled_eu: no <7> [152.183849] i915 device info: cursor_needs_physical: no <7> [152.183851] i915 device info: has_cdclk_crawl: yes <7> [152.183853] i915 device info: has_cdclk_squash: no <7> [152.183855] i915 device info: has_ddi: yes <7> [152.183857] i915 device info: has_dp_mst: yes <7> [152.183859] i915 device info: has_dsb: yes <7> [152.183861] i915 device info: has_fpga_dbg: yes <7> [152.183863] i915 device info: has_gmch: no <7> [152.183865] i915 device info: has_hotplug: yes <7> [152.183867] i915 device info: has_hti: no <7> [152.183870] i915 device info: has_ipc: yes <7> [152.183872] i915 device info: has_overlay: no <7> [152.183874] i915 device info: has_psr: yes <7> [152.183876] i915 device info: has_psr_hw_tracking: no <7> [152.183878] i915 device info: overlay_needs_physical: no <7> [152.183880] i915 device info: supports_tv: no <7> [152.183882] i915 device info: has_hdcp: yes <7> [152.183746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7> [152.183884] i915 device info: has_dmc: yes <7> [152.183886] i915 device info: has_dsc: yes <7> [152.183888] i915 device info: rawclk rate: 19200 kHz <7> [152.183890] i915 device info: iommu: enabled <7> [152.183892] i915 device info: available engines: 41403 <7> [152.183894] i915 device info: slice total: 1, mask=0001 <7> [152.183897] i915 device info: subslice total: 6 <7> [152.183899] i915 device info: slice0: 6 subslices, mask=0000003f <7> [152.183901] i915 device info: EU total: 96 <7> [152.183903] i915 device info: EU per subslice: 16 <7> [152.183905] i915 device info: has slice power gating: yes <7> [152.183907] i915 device info: has subslice power gating: no <7> [152.183908] i915 device info: has EU power gating: no <6> [152.183910] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [152.183912] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [152.183914] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [152.184061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7> [152.184370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [152.184649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [152.184925] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [152.185248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [152.185802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.186909] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] status updated from unknown to disconnected <7> [152.186940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [152.187023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [152.187043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [152.187400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.187913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.188169] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] status updated from unknown to disconnected <7> [152.188207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [152.188241] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [152.188267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [152.188477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.189056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.189311] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] status updated from unknown to disconnected <7> [152.189339] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [152.189363] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [152.189380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [152.189574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.190021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.190257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] status updated from unknown to disconnected <7> [152.190283] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [152.190305] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [152.190311] [drm:drm_client_modeset_probe] connector 236 enabled? no <7> [152.190315] [drm:drm_client_modeset_probe] connector 249 enabled? no <7> [152.190318] [drm:drm_client_modeset_probe] connector 255 enabled? no <7> [152.190321] [drm:drm_client_modeset_probe] connector 264 enabled? no <7> [152.190359] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [152.190371] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [152.190389] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [152.190410] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [152.190937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.191169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [152.191555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [152.191834] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [152.192097] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [152.192342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [152.192568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [152.192809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [152.193025] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [152.193288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [152.193837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.194260] [drm:drm_client_modeset_probe] <7> [152.194298] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [152.194320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [152.194517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.194948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.195398] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [152.195426] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [152.195448] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [152.195650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.196090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.196330] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [152.196350] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [152.196368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [152.196558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <6> [152.197081] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7> [152.197001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.197231] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [152.197250] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [152.197267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [152.197466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.197914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.198135] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [152.198164] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [152.198169] [drm:drm_client_modeset_probe] connector 236 enabled? no <7> [152.198173] [drm:drm_client_modeset_probe] connector 249 enabled? no <7> [152.198176] [drm:drm_client_modeset_probe] connector 255 enabled? no <7> [152.198179] [drm:drm_client_modeset_probe] connector 264 enabled? no <7> [152.198216] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [152.198228] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [152.198246] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [152.198267] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [152.198333] [drm:drm_client_modeset_probe] <7> [152.198365] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [152.198382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [152.198588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.199011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.199245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [152.199264] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [152.199281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [152.199465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.199896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.200117] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [152.200136] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [152.200165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [152.200360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.200813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.201032] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [152.201051] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [152.201068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [152.201289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.201736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.201962] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [152.201981] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [152.201986] [drm:drm_client_modeset_probe] connector 236 enabled? no <7> [152.201989] [drm:drm_client_modeset_probe] connector 249 enabled? no <7> [152.201992] [drm:drm_client_modeset_probe] connector 255 enabled? no <7> [152.201995] [drm:drm_client_modeset_probe] connector 264 enabled? no <7> [152.202031] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [152.202042] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [152.202059] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [152.202079] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [152.202482] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [152.202973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.203352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [152.203959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [152.204530] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [152.204883] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [152.205235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [152.205572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [152.205883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [152.206353] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [152.215118] [IGT] core_hotunplug: reopening DRM device for health check <7> [152.215190] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [152.215838] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [152.219287] [IGT] core_hotunplug: running device sysfs healthcheck <7> [152.219469] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [152.219915] [IGT] core_hotunplug: closing health checked device instance <7> [152.220082] [IGT] core_hotunplug: reopening render device for health check <7> [152.220122] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [152.221037] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [152.224191] [IGT] core_hotunplug: running device sysfs healthcheck <7> [152.224518] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [152.224931] [IGT] core_hotunplug: closing health checked device instance <6> [152.225724] [IGT] core_hotunplug: exiting, ret=0

<6> [150.350057] Console: switching to colour dummy device 80x25

<6> [150.350140] [IGT] core_hotunplug: executing

<7> [150.354088] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [150.355112] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [150.355488] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [150.356749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [150.360806] [IGT] core_hotunplug: closing selected device instance

<7> [150.361214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [150.361593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [150.361789] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.361961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [150.362127] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.362308] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [150.362488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [150.362648] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [150.362794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<6> [150.363532] [IGT] core_hotunplug: starting subtest unbind-rebind

<7> [150.371136] [IGT] core_hotunplug: reopening DRM device for health check

<7> [150.371179] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [150.371600] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [150.375175] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [150.375268] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [150.375491] [IGT] core_hotunplug: closing health checked device instance

<7> [150.376689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [150.377033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [150.377587] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.377753] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [150.377914] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.378070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [150.378248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [150.378400] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [150.378547] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [150.379178] [IGT] core_hotunplug: reopening render device for health check

<7> [150.379211] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [150.379603] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [150.382962] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [150.383122] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [150.383381] [IGT] core_hotunplug: closing health checked device instance

<7> [150.383733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [150.384065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [150.384815] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.384987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [150.385156] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.385313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [150.385483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [150.385627] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [150.385767] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [150.441734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [150.442190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [150.442417] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.442591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [150.442757] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.442921] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [150.443072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [150.443291] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [150.456973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [150.457181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [150.457348] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [150.457495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [150.487739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [150.488492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [150.489180] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.489607] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [150.489990] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.490373] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [150.490699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [150.491016] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [150.504877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [150.505201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [150.505488] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [150.505746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [150.554582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [150.554975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [150.555639] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.556001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [150.556496] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.556779] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [150.557093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [150.557388] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [150.575872] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [150.576059] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [150.576244] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [150.576393] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [150.576531] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [150.576669] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [150.576807] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [150.576942] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [150.577076] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [150.577222] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [150.577354] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [150.577491] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [150.577625] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [150.577763] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [150.577896] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [150.578030] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [150.578173] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [150.578308] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [150.578443] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [150.578576] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [150.578711] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [150.578843] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [150.578971] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [150.579096] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [150.579244] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [150.579377] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [150.579509] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [150.579640] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [150.579767] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [150.579896] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [150.580026] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [150.580159] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [150.580291] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [150.580419] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [150.580552] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [150.580684] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [150.581622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [150.581777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [150.581921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [150.582055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [150.656499] [IGT] core_hotunplug: unbinding the driver from the device

<7> [150.656904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [150.658353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [150.659322] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.659933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [150.660524] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.661027] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [150.661513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [150.661971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [150.662563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B

<7> [150.662943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C

<7> [150.663303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D

<7> [150.692472] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [150.756301] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [150.756898] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [150.859329] [IGT] core_hotunplug: rebinding the driver to the device

<7> [150.860386] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K

<7> [150.860554] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)

<7> [150.860705] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH

<7> [150.860857] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [150.861228] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 19200 kHz

<7> [150.861358] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005

<7> [150.861473] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001

<7> [150.861879] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [150.862004] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [150.862114] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [150.862242] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [150.862271] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [150.862551] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [150.862565] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000050200087

<7> [150.862701] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [150.863250] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x44a07018

<7> [150.863399] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [150.863515] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [150.863625] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [150.863731] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [150.863854] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [150.863968] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4

<7> [150.864080] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [150.864219] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2401 tRP=24 tRDPRE=20 tRAS=52 tRCD=24 tRC=76

<7> [150.864361] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=4801 tRP=44 tRDPRE=28 tRAS=104 tRCD=44 tRC=148

<7> [150.864511] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160

<7> [150.864640] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160

<7> [150.864766] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32

<7> [150.864884] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=39

<7> [150.865007] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=48

<7> [150.865126] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=16956

<7> [150.865258] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=23981

<7> [150.865389] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=24772

<7> [150.865511] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=24772

<7> [150.865630] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133

<7> [150.865751] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=41600

<7> [150.865868] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=51200

<7> [150.865990] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21855

<7> [150.866114] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=4 deratedbw=34500

<7> [150.866300] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=4 deratedbw=36108

<7> [150.866422] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=4 deratedbw=36108

<7> [150.866543] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133

<7> [150.866666] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=41600

<7> [150.866786] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=51200

<7> [150.866907] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=25544

<7> [150.867028] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000

<7> [150.867159] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000

<7> [150.867280] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000

<7> [150.867404] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133

<7> [150.867526] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=41600

<7> [150.867645] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=51200

<7> [150.867767] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=27900

<7> [150.867891] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000

<7> [150.868016] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000

<7> [150.868137] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000

<7> [150.868274] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133

<7> [150.868395] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=41600

<7> [150.868520] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=51200

<7> [150.868640] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=29248

<7> [150.868760] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000

<7> [150.868882] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000

<7> [150.869003] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000

<7> [150.869127] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133

<7> [150.869263] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=41600

<7> [150.869384] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=51200

<7> [150.869507] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=29972

<7> [150.869626] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000

<7> [150.869746] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000

<7> [150.869868] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000

<7> [150.869986] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133

<7> [150.870102] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=41600

<7> [150.870236] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=51200

<7> [150.870948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [150.871093] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 251

<7> [150.871260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)

<7> [150.871400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5)

<7> [150.871533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [150.871663] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [150.871789] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812)

<7> [150.871918] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)

<7> [150.872043] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [150.872189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [150.872319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)

<7> [150.872448] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)

<7> [150.872571] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78)

<7> [150.872701] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [150.872826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [150.872953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [150.873074] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [150.873212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 251 not known; assuming 39

<7> [150.873341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [150.873469] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [150.873592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [150.873715] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [150.873839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [150.873960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [150.874084] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [150.874224] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [150.874342] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [150.874463] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [150.874581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0

<7> [150.874698] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [150.874818] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [150.874940] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a

<7> [150.875073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [150.875282] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.875427] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [150.875571] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.875709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [150.875834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [150.875971] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [150.876104] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [150.876312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [150.876438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [150.876565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [150.876722] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.876865] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [150.877006] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [150.877154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [150.877278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [150.877412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [150.877540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B

<7> [150.877667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C

<7> [150.877795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D

<7> [150.878004] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adlp_dmc.bin

<7> [150.879341] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [150.880649] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 35 us

<7> [150.880867] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)

<7> [150.881045] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 54 (54.0 usec)

<7> [150.881229] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 83 (83.0 usec)

<7> [150.881395] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 106 (106.0 usec)

<7> [150.881556] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 168 (168.0 usec)

<7> [150.881714] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 168 (168.0 usec)

<6> [150.882244] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.19)

<7> [150.884682] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 4 display pipes available.

<7> [150.887921] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [150.888178] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [150.888381] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [150.888527] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz

<7> [150.888720] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 1305600 kHz

<7> [150.888936] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT)

<7> [150.889120] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A]

<7> [150.889350] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [150.889541] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [150.889725] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [150.889913] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [150.890093] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [150.890283] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [150.890467] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [150.890647] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [150.890826] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [150.891035] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0

<7> [150.891473] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [150.891634] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [150.891791] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [150.891949] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [150.892104] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [150.892425] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [150.892655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [150.893238] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on

<7> [150.893437] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [150.893723] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [150.893911] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [150.894207] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [150.894392] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [151.124155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.153155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.182155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.211153] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.239155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.268155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.296155] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.325157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.354156] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.383157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.412158] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.441156] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.470158] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.498160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.527157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.556159] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.585157] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.614158] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.643160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.672160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.701160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.730160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.759160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.788162] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.817162] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.846161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.875161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.904161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.932161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.961161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [151.990161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [152.018161] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [152.018423] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [152.018482] i915 0000:00:02.0: [drm] [ENCODER:235:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [152.018584] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off

<7> [152.018965] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [152.019265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [152.020022] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI B/PHY B] using AUX B (VBT)

<7> [152.020312] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:235:DDI B/PHY B]

<7> [152.021007] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:235:DDI B/PHY B]

<7> [152.021244] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:235:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [152.021557] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:254:DDI TC1/PHY TC1] using AUX D (VBT)

<7> [152.022093] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [152.022400] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:254:DDI TC1/PHY TC1]

<7> [152.022798] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:263:DDI TC2/PHY TC2] using AUX E (VBT)

<7> [152.023217] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [152.023483] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:263:DDI TC2/PHY TC2]

<7> [152.023842] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port F is not present

<7> [152.024053] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port G is not present

<7> [152.024679] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled

<7> [152.025011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled

<7> [152.025347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled

<7> [152.025656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled

<7> [152.025846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [152.026049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A

<7> [152.026256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A

<7> [152.026463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A

<7> [152.026659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A

<7> [152.026856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A

<7> [152.027048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B

<7> [152.027258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B

<7> [152.027449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B

<7> [152.027633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B

<7> [152.027828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B

<7> [152.028024] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B

<7> [152.028231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C

<7> [152.028424] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C

<7> [152.028620] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C

<7> [152.028811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C

<7> [152.028995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C

<7> [152.029192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C

<7> [152.029387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D

<7> [152.029581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D

<7> [152.029773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D

<7> [152.029964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D

<7> [152.030167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D

<7> [152.030368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D

<7> [152.030564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [152.030754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:237:DP-MST A] hw state readout: disabled, pipe A

<7> [152.030937] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DP-MST B] hw state readout: disabled, pipe B

<7> [152.031125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:239:DP-MST C] hw state readout: disabled, pipe C

<7> [152.031328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DP-MST D] hw state readout: disabled, pipe D

<7> [152.031552] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected)

<7> [152.031741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [152.031931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:256:DP-MST A] hw state readout: disabled, pipe A

<7> [152.032113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:257:DP-MST B] hw state readout: disabled, pipe B

<7> [152.032317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:258:DP-MST C] hw state readout: disabled, pipe C

<7> [152.032501] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:259:DP-MST D] hw state readout: disabled, pipe D

<7> [152.032696] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected)

<7> [152.032884] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:263:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [152.033075] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST A] hw state readout: disabled, pipe A

<7> [152.033276] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST B] hw state readout: disabled, pipe B

<7> [152.033462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST C] hw state readout: disabled, pipe C

<7> [152.033639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DP-MST D] hw state readout: disabled, pipe D

<7> [152.033831] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [152.034033] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [152.034245] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 0

<7> [152.034457] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [152.034661] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [152.034863] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [152.035064] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [152.035418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:DP-1] hw state readout: disabled

<7> [152.035634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:249:HDMI-A-1] hw state readout: disabled

<7> [152.035845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:255:DP-2] hw state readout: disabled

<7> [152.036046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:264:DP-3] hw state readout: disabled

<7> [152.036240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [152.036422] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz

<7> [152.036608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz

<7> [152.036793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz

<7> [152.036978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz

<7> [152.037179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz

<7> [152.037374] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [152.037596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz

<7> [152.037808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz

<7> [152.038000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz

<7> [152.038212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz

<7> [152.038411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz

<7> [152.038607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz

<7> [152.038796] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [152.039013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz

<7> [152.039227] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz

<7> [152.039435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz

<7> [152.039636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz

<7> [152.039830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz

<7> [152.040029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz

<7> [152.040234] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [152.040457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz

<7> [152.040651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz

<7> [152.040844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz

<7> [152.041040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz

<7> [152.041246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz

<7> [152.041444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz

<7> [152.041629] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0

<7> [152.041919] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]

<7> [152.042131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]

<7> [152.042350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state]

<7> [152.042560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state]

<7> [152.042779] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [152.042973] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [152.043172] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [152.043361] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [152.057620] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K)

<7> [152.057872] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [152.058077] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [152.058323] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [152.058340] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global

<7> [152.059469] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0

<7> [152.059697] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [152.059915] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0

<7> [152.061200] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0

<7> [152.061425] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0

<7> [152.061644] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0

<7> [152.062178] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0

<7> [152.062400] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0

<7> [152.062915] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2

<7> [152.063122] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2

<7> [152.063857] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0

<7> [152.064067] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0

<7> [152.066235] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [152.066527] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset

<7> [152.096767] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f

<7> [152.096993] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000

<7> [152.097228] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4

<7> [152.097438] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [152.097645] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8

<7> [152.097855] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x46aa000c

<7> [152.098063] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [152.098277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [152.098488] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [152.098692] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [152.098899] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [152.099100] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [152.099315] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [152.099520] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [152.099721] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [152.101829] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1

<6> [152.101834] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3

<7> [152.122430] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 18ms, freq = 850MHz, before = 850MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [152.123481] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [152.125271] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [152.126241] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled

<6> [152.126246] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled

<6> [152.127001] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled

<7> [152.135205] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping

<7> [152.135418] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping

<7> [152.135600] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping

<7> [152.135770] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping

<7> [152.135940] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [152.136137] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [152.136874] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [152.137063] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [152.137267] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [152.137447] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1

<7> [152.137626] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [152.142503] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [152.144120] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:DP-1] generating connector hotplug event

<7> [152.144787] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:249:HDMI-A-1] generating connector hotplug event

<7> [152.145405] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2

<7> [152.146780] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:255:DP-2] generating connector hotplug event

<7> [152.147399] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-3

<7> [152.148414] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:264:DP-3] generating connector hotplug event

<6> [152.148496] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [152.152191] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [152.173169] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [152.179854] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [152.181870] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [152.182161] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=448

<7> [152.182793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [152.182914] [drm:drm_client_modeset_probe]

<7> [152.182986] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]

<7> [152.183021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [152.183416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B

<7> [152.183513] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [152.183731] i915 device info: pciid=0x46aa rev=0x0c platform=ALDERLAKE_P (subplatform=0x0) gen=12

<7> [152.183736] i915 device info: graphics version: 12

<7> [152.183738] i915 device info: media version: 12

<7> [152.183741] i915 device info: display version: 13

<7> [152.183743] i915 device info: graphics stepping: C0

<7> [152.183746] i915 device info: media stepping: C0

<7> [152.183748] i915 device info: display stepping: D0

<7> [152.183750] i915 device info: base die stepping: **

<7> [152.183752] i915 device info: gt: 0

<7> [152.183754] i915 device info: memory-regions: 0x21

<7> [152.183757] i915 device info: page-sizes: 0x211000

<7> [152.183759] i915 device info: platform: ALDERLAKE_P

<7> [152.183761] i915 device info: ppgtt-size: 48

<7> [152.183763] i915 device info: ppgtt-type: 2

<7> [152.183765] i915 device info: dma_mask_size: 39

<7> [152.183768] i915 device info: is_mobile: no

<7> [152.183770] i915 device info: is_lp: no

<7> [152.183772] i915 device info: require_force_probe: no

<7> [152.183774] i915 device info: is_dgfx: no

<7> [152.183776] i915 device info: has_64bit_reloc: yes

<7> [152.183778] i915 device info: has_64k_pages: no

<7> [152.183780] i915 device info: gpu_reset_clobbers_display: no

<7> [152.183782] i915 device info: has_reset_engine: yes

<7> [152.183785] i915 device info: has_3d_pipeline: yes

<7> [152.183787] i915 device info: has_4tile: no

<7> [152.183789] i915 device info: has_flat_ccs: no

<7> [152.183791] i915 device info: has_global_mocs: yes

<7> [152.183793] i915 device info: has_gmd_id: no

<7> [152.183795] i915 device info: has_gt_uc: yes

<7> [152.183797] i915 device info: has_heci_pxp: no

<7> [152.183799] i915 device info: has_heci_gscfi: no

<7> [152.183801] i915 device info: has_guc_deprivilege: no

<7> [152.183803] i915 device info: has_l3_ccs_read: no

<7> [152.183805] i915 device info: has_l3_dpf: no

<7> [152.183807] i915 device info: has_llc: yes

<7> [152.183809] i915 device info: has_logical_ring_contexts: yes

<7> [152.183811] i915 device info: has_logical_ring_elsq: yes

<7> [152.183813] i915 device info: has_media_ratio_mode: no

<7> [152.183816] i915 device info: has_mslice_steering: no

<7> [152.183818] i915 device info: has_oa_bpc_reporting: no

<7> [152.183820] i915 device info: has_oa_slice_contrib_limits: no

<7> [152.183822] i915 device info: has_oam: no

<7> [152.183824] i915 device info: has_one_eu_per_fuse_bit: no

<7> [152.183826] i915 device info: has_pxp: yes

<7> [152.183828] i915 device info: has_rc6: yes

<7> [152.183830] i915 device info: has_rc6p: no

<7> [152.183832] i915 device info: has_rps: yes

<7> [152.183834] i915 device info: has_runtime_pm: yes

<7> [152.183836] i915 device info: has_snoop: no

<7> [152.183838] i915 device info: has_coherent_ggtt: no

<7> [152.183841] i915 device info: tuning_thread_rr_after_dep: no

<7> [152.183843] i915 device info: unfenced_needs_alignment: no

<7> [152.183845] i915 device info: hws_needs_physical: no

<7> [152.183847] i915 device info: has_pooled_eu: no

<7> [152.183849] i915 device info: cursor_needs_physical: no

<7> [152.183851] i915 device info: has_cdclk_crawl: yes

<7> [152.183853] i915 device info: has_cdclk_squash: no

<7> [152.183855] i915 device info: has_ddi: yes

<7> [152.183857] i915 device info: has_dp_mst: yes

<7> [152.183859] i915 device info: has_dsb: yes

<7> [152.183861] i915 device info: has_fpga_dbg: yes

<7> [152.183863] i915 device info: has_gmch: no

<7> [152.183865] i915 device info: has_hotplug: yes

<7> [152.183867] i915 device info: has_hti: no

<7> [152.183870] i915 device info: has_ipc: yes

<7> [152.183872] i915 device info: has_overlay: no

<7> [152.183874] i915 device info: has_psr: yes

<7> [152.183876] i915 device info: has_psr_hw_tracking: no

<7> [152.183878] i915 device info: overlay_needs_physical: no

<7> [152.183880] i915 device info: supports_tv: no

<7> [152.183882] i915 device info: has_hdcp: yes

<7> [152.183746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C

<7> [152.183884] i915 device info: has_dmc: yes

<7> [152.183886] i915 device info: has_dsc: yes

<7> [152.183888] i915 device info: rawclk rate: 19200 kHz

<7> [152.183890] i915 device info: iommu: enabled

<7> [152.183892] i915 device info: available engines: 41403

<7> [152.183894] i915 device info: slice total: 1, mask=0001

<7> [152.183897] i915 device info: subslice total: 6

<7> [152.183899] i915 device info: slice0: 6 subslices, mask=0000003f

<7> [152.183901] i915 device info: EU total: 96

<7> [152.183903] i915 device info: EU per subslice: 16

<7> [152.183905] i915 device info: has slice power gating: yes

<7> [152.183907] i915 device info: has subslice power gating: no

<7> [152.183908] i915 device info: has EU power gating: no

<6> [152.183910] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [152.183912] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [152.183914] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [152.184061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D

<7> [152.184370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [152.184649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [152.184925] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [152.185248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [152.185802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.186909] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] status updated from unknown to disconnected

<7> [152.186940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected

<7> [152.187023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]

<7> [152.187043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [152.187400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.187913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.188169] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] status updated from unknown to disconnected

<7> [152.188207] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [152.188241] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]

<7> [152.188267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [152.188477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.189056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.189311] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] status updated from unknown to disconnected

<7> [152.189339] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected

<7> [152.189363] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]

<7> [152.189380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [152.189574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.190021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.190257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] status updated from unknown to disconnected

<7> [152.190283] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected

<7> [152.190305] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [152.190311] [drm:drm_client_modeset_probe] connector 236 enabled? no

<7> [152.190315] [drm:drm_client_modeset_probe] connector 249 enabled? no

<7> [152.190318] [drm:drm_client_modeset_probe] connector 255 enabled? no

<7> [152.190321] [drm:drm_client_modeset_probe] connector 264 enabled? no

<7> [152.190359] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [152.190371] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [152.190389] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [152.190410] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [152.190937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.191169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [152.191555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [152.191834] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [152.192097] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [152.192342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [152.192568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [152.192809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [152.193025] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [152.193288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [152.193837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.194260] [drm:drm_client_modeset_probe]

<7> [152.194298] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]

<7> [152.194320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [152.194517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.194948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.195398] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected

<7> [152.195426] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]

<7> [152.195448] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [152.195650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.196090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.196330] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [152.196350] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]

<7> [152.196368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [152.196558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<6> [152.197081] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100

<7> [152.197001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.197231] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected

<7> [152.197250] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]

<7> [152.197267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [152.197466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.197914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.198135] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected

<7> [152.198164] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [152.198169] [drm:drm_client_modeset_probe] connector 236 enabled? no

<7> [152.198173] [drm:drm_client_modeset_probe] connector 249 enabled? no

<7> [152.198176] [drm:drm_client_modeset_probe] connector 255 enabled? no

<7> [152.198179] [drm:drm_client_modeset_probe] connector 264 enabled? no

<7> [152.198216] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [152.198228] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [152.198246] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [152.198267] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [152.198333] [drm:drm_client_modeset_probe]

<7> [152.198365] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]

<7> [152.198382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [152.198588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.199011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.199245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected

<7> [152.199264] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]

<7> [152.199281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [152.199465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.199896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.200117] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [152.200136] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]

<7> [152.200165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [152.200360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.200813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.201032] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected

<7> [152.201051] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]

<7> [152.201068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [152.201289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.201736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.201962] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected

<7> [152.201981] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [152.201986] [drm:drm_client_modeset_probe] connector 236 enabled? no

<7> [152.201989] [drm:drm_client_modeset_probe] connector 249 enabled? no

<7> [152.201992] [drm:drm_client_modeset_probe] connector 255 enabled? no

<7> [152.201995] [drm:drm_client_modeset_probe] connector 264 enabled? no

<7> [152.202031] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [152.202042] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [152.202059] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [152.202079] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [152.202482] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [152.202973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.203352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [152.203959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [152.204530] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [152.204883] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [152.205235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [152.205572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [152.205883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [152.206353] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [152.215118] [IGT] core_hotunplug: reopening DRM device for health check

<7> [152.215190] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [152.215838] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [152.219287] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [152.219469] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [152.219915] [IGT] core_hotunplug: closing health checked device instance

<7> [152.220082] [IGT] core_hotunplug: reopening render device for health check

<7> [152.220122] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [152.221037] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [152.224191] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [152.224518] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [152.224931] [IGT] core_hotunplug: closing health checked device instance

<6> [152.225724] [IGT] core_hotunplug: exiting, ret=0

Results for igt@core_hotunplug@unbind-rebind