igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.4-rc3 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g0f0754413 (x86_64) (Linux: 6.4.0-rc3-linus-v6.4-rc3-g44c026a73be8+ x86_64)
Out	Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa2d/0xd10 [i915] intel_atomic_commit+0x380/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_dmc_debugfs_status_show+0x3b/0x440 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xa9/0x2f0 ksys_read+0x64/0xe0 do_syscall_64+0x3f/0x90 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_dmc_debugfs_status_show+0x340/0x440 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xa9/0x2f0 Wakeref count: 0 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: yes Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe6/0x240 [i915] pci_pm_runtime_suspend+0x5d/0x1a0 __rpm_callback+0x3f/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 0 Subtest module-reload: SUCCESS (26.138s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (26.138s)
Dmesg	<6> [147.802138] [IGT] i915_pm_rpm: executing <7> [147.807281] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [147.807721] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [147.807738] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [147.808055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.808232] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.808357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.808955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.809253] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [147.809326] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [147.809338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [147.809504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.809984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [147.810478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.811081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [147.812534] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [147.813633] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [147.814389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [147.814607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.814737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.814884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.815458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.815588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [147.815653] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [147.815665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [147.815789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.817543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.817664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [147.818351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.818871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.818898] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.819023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [147.845283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.845288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [147.845414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.845539] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [147.849124] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [147.849140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [147.849271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.849749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.849966] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [147.850374] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [147.850387] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [147.850507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.850971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [147.851482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.852051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [147.853143] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [147.854224] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [147.854982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [147.855137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.855263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.855385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.855968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.856097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [147.856518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [147.856531] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [147.856656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.857739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.857856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [147.858535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.859047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.859053] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.859164] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [147.884795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.884799] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [147.884968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.885094] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [147.885398] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [147.885411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [147.885527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.886028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.886157] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [147.886181] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [147.886192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [147.886310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.886777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [147.887306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.887861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [147.888816] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [147.889812] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [147.890564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [147.890709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.890860] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.890982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.891556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.891704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [147.891730] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [147.891741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [147.891903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.893471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.893592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [147.894308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.894817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.894822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.894980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [147.919579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.919584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [147.919692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.919846] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [158.963619] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [158.968833] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [158.991941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [158.997515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.998168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [158.998446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [158.999264] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [158.999453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.000044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [159.000450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.000684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.001307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.001951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [159.002172] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.002347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.002956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.003103] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [159.004124] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [159.005843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [159.030169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [159.035374] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [159.035657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.035823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.036277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.036871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [159.037012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.037152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.037742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.037942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [159.038840] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [159.038841] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [159.041576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [159.066049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [159.072446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [159.072679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.073468] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.074420] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.075264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [159.078160] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [159.078991] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [159.079642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [159.080255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [159.080587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.080933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.081720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.082032] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [159.082075] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [159.082265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.083643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [159.083836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [159.084605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [159.085139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [159.085147] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [159.085322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [159.117619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [159.117627] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [159.117830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.118042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [159.118072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [159.118275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.118834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.119041] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [159.119163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.119301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.119749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.120310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [159.120437] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.120559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.121144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.121370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [159.121943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [159.124359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [159.148678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [159.154538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [159.154645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.155172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.155710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.156314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [159.157585] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [159.158406] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [159.158913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [159.159148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [159.159361] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.159538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.160213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.160435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [159.160459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [159.160645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.161826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [159.162002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [159.162772] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [159.163854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [159.163860] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [159.164063] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [159.192022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [159.192032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [159.192216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.192415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [159.192450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [159.192628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.193212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.193423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [159.193446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [159.193622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.194184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.194694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.195274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [159.196675] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [159.197371] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [159.197926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [159.198143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [159.198330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.198513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.199707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.199914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [159.199936] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [159.200111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.201761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [159.201949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [159.202670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [159.203221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [159.203228] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [159.203394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [159.231329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [159.231336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [159.231501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.231690] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [159.231713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [159.234642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [159.323645] [IGT] i915_pm_rpm: starting subtest module-reload <7> [159.427980] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [159.432867] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [159.433457] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [159.433695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.434388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.434711] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [159.434748] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [159.434767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.435055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.435626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.436298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [159.436673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [159.436923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [159.437184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [159.437400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [159.438743] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [159.439518] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [159.440106] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [159.440137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [159.440670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [159.440895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [159.441367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [159.441595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [159.441603] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [159.441813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [159.446256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [159.446265] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [159.446470] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [159.472976] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [159.515743] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [159.904429] [IGT] Reloading i915 w/o display <7> [160.090909] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [160.091141] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [160.091301] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [160.091445] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [160.091695] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [160.091879] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [160.092545] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [160.092663] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [160.092772] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [160.092922] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [160.092928] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [160.093290] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [160.093306] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [160.093440] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [160.093711] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [160.093945] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [160.094099] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [160.094233] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [160.094364] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [160.098499] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [160.098656] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [160.098834] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [160.098974] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [160.099110] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [160.099230] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [160.099328] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [160.099427] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [160.099522] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [160.099617] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [160.099711] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [160.099851] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [160.099947] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [160.100041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [160.100660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [160.100851] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [160.101046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [160.101192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [160.101340] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [160.101484] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [160.101627] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [160.101771] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [160.101973] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [160.102156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [160.102303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [160.102451] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [160.102595] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [160.102739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [160.102904] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [160.103102] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [160.103262] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [160.103404] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [160.103544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [160.103685] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [160.103864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [160.104042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [160.104181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [160.104322] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [160.104480] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [160.104683] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [160.104923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [160.105097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [160.105240] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [160.105717] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [160.105935] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [160.106113] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [160.106297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [160.106438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [160.106599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [160.106753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [160.106948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [160.107126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [160.107266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [160.107406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [160.107576] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [160.108523] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [160.108959] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [160.109370] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [160.109514] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [160.109652] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [160.109838] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [160.110048] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [160.110242] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [160.110412] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [160.110553] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [160.110688] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [160.110868] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [160.112053] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [160.113452] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [160.113730] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [160.114006] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [160.116762] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [160.116952] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [160.117098] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [160.117240] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [160.117387] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [160.117529] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [160.117688] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [160.117858] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [160.117998] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [160.118138] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [160.118278] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [160.118451] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [160.118651] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [160.118814] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [160.118962] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [160.119138] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [160.119326] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [160.119595] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [160.119976] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [160.120152] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [160.120358] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [160.120509] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [160.120696] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [160.120875] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [160.337788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.348790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.359788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.370787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.381788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.392790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.403787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.414789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.425787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.436790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.448506] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.458788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.469789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.480788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.491787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.502788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.513789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.524789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.535788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.546787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.557789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.568788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.579788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.590789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.601790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.612788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.623787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.634790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.645788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.656788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.667787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.678789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [160.678964] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [160.679003] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [160.679072] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [160.679271] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [160.679458] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [160.679602] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [160.680109] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [160.680300] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [160.680452] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [160.680740] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [160.680899] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [160.681074] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [160.681281] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [160.681425] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [160.681876] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [160.682116] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [160.682274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [160.682417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [160.682558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [160.682699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [160.682853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [160.683038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [160.683178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [160.683320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [160.683497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [160.683701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [160.683921] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [160.684164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [160.684324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [160.684502] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [160.684653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [160.684838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [160.685017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [160.685152] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [160.685295] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [160.685442] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [160.685587] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [160.685730] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [160.685939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [160.686106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [160.686253] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [160.686389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [160.686523] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [160.686658] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [160.686800] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [160.686987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [160.687126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [160.687263] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [160.687398] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [160.687542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [160.687725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [160.687967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [160.688211] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [160.688468] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [160.688656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [160.688853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [160.689065] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [160.689244] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.689384] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.689518] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.689678] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [160.689800] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [160.689998] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [160.690137] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [160.691116] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [160.691257] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [160.691392] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [160.701597] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [160.701926] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [160.702110] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [160.702250] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [160.702382] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [160.702561] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [160.703107] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [160.703217] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [160.703323] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [160.703427] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [160.705817] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [160.706839] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [160.707292] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [160.708100] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [160.708479] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [160.708642] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [160.710084] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [160.723043] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [160.724992] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [160.725528] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [160.726386] [drm:drm_client_modeset_probe] <7> [160.726330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [160.726569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [160.726724] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [160.726775] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.726794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [160.727002] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [160.727007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [160.727302] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [160.727325] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [160.727343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.727546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [160.727571] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [160.727589] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [160.727607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.727700] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [160.727829] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [160.727852] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.727868] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [160.727876] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [160.727880] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [160.727883] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [160.727961] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [160.727982] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [160.728009] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [160.728036] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [160.728192] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [160.728198] i915 device info: graphics version: 9 <7> [160.728200] i915 device info: media version: 9 <7> [160.728203] i915 device info: display version: 9 <7> [160.728206] i915 device info: graphics stepping: F0 <7> [160.728208] i915 device info: media stepping: F0 <7> [160.728211] i915 device info: display stepping: C0 <7> [160.728213] i915 device info: base die stepping: <7> [160.728216] i915 device info: gt: 2 <7> [160.728218] i915 device info: memory-regions: 0x21 <7> [160.728221] i915 device info: page-sizes: 0x11000 <7> [160.728224] i915 device info: platform: KABYLAKE <7> [160.728226] i915 device info: ppgtt-size: 48 <7> [160.728229] i915 device info: ppgtt-type: 2 <7> [160.728231] i915 device info: dma_mask_size: 39 <7> [160.728234] i915 device info: is_mobile: no <7> [160.728236] i915 device info: is_lp: no <7> [160.728239] i915 device info: require_force_probe: no <7> [160.728241] i915 device info: is_dgfx: no <7> [160.728244] i915 device info: has_64bit_reloc: yes <7> [160.728246] i915 device info: has_64k_pages: no <7> [160.728249] i915 device info: gpu_reset_clobbers_display: no <7> [160.728251] i915 device info: has_reset_engine: yes <7> [160.728253] i915 device info: has_3d_pipeline: yes <7> [160.728256] i915 device info: has_4tile: no <7> [160.728258] i915 device info: has_flat_ccs: no <7> [160.728261] i915 device info: has_global_mocs: no <7> [160.728263] i915 device info: has_gmd_id: no <7> [160.728266] i915 device info: has_gt_uc: yes <7> [160.728268] i915 device info: has_heci_pxp: no <7> [160.728270] i915 device info: has_heci_gscfi: no <7> [160.728273] i915 device info: has_guc_deprivilege: no <7> [160.728275] i915 device info: has_l3_ccs_read: no <7> [160.728278] i915 device info: has_l3_dpf: no <7> [160.728280] i915 device info: has_llc: yes <7> [160.728283] i915 device info: has_logical_ring_contexts: yes <7> [160.728285] i915 device info: has_logical_ring_elsq: no <7> [160.728287] i915 device info: has_media_ratio_mode: no <7> [160.728290] i915 device info: has_mslice_steering: no <7> [160.728292] i915 device info: has_oa_bpc_reporting: no <7> [160.728295] i915 device info: has_oa_slice_contrib_limits: no <7> [160.728297] i915 device info: has_oam: no <7> [160.728299] i915 device info: has_one_eu_per_fuse_bit: no <7> [160.728302] i915 device info: has_pxp: no <7> [160.728304] i915 device info: has_rc6: yes <7> [160.728307] i915 device info: has_rc6p: no <7> [160.728309] i915 device info: has_rps: yes <7> [160.728312] i915 device info: has_runtime_pm: yes <7> [160.728314] i915 device info: has_snoop: no <7> [160.728317] i915 device info: has_coherent_ggtt: yes <7> [160.728320] i915 device info: tuning_thread_rr_after_dep: no <7> [160.728322] i915 device info: unfenced_needs_alignment: no <7> [160.728325] i915 device info: hws_needs_physical: no <7> [160.728327] i915 device info: has_pooled_eu: no <7> [160.728330] i915 device info: cursor_needs_physical: no <7> [160.728332] i915 device info: has_cdclk_crawl: no <7> [160.728334] i915 device info: has_cdclk_squash: no <7> [160.728337] i915 device info: has_ddi: yes <7> [160.728340] i915 device info: has_dp_mst: yes <7> [160.728342] i915 device info: has_dsb: no <7> [160.728345] i915 device info: has_fpga_dbg: yes <7> [160.728347] i915 device info: has_gmch: no <7> [160.728350] i915 device info: has_hotplug: yes <7> [160.728352] i915 device info: has_hti: no <7> [160.728355] i915 device info: has_ipc: yes <7> [160.728357] i915 device info: has_overlay: no <7> [160.728360] i915 device info: has_psr: yes <7> [160.728362] i915 device info: has_psr_hw_tracking: yes <7> [160.728364] i915 device info: overlay_needs_physical: no <7> [160.728367] i915 device info: supports_tv: no <7> [160.728369] i915 device info: has_hdcp: yes <7> [160.728372] i915 device info: has_dmc: yes <7> [160.728374] i915 device info: has_dsc: no <7> [160.728377] i915 device info: rawclk rate: 24000 kHz <7> [160.728379] i915 device info: iommu: enabled <7> [160.728382] i915 device info: available engines: 40403 <7> [160.728385] i915 device info: slice total: 1, mask=0001 <7> [160.728388] i915 device info: subslice total: 3 <7> [160.728391] i915 device info: slice0: 3 subslices, mask=00000007 <7> [160.728394] i915 device info: slice1: 0 subslices, mask=00000000 <7> [160.728396] i915 device info: slice2: 0 subslices, mask=00000000 <7> [160.728399] i915 device info: EU total: 24 <7> [160.728401] i915 device info: EU per subslice: 8 <7> [160.728404] i915 device info: has slice power gating: no <7> [160.728406] i915 device info: has subslice power gating: no <7> [160.728409] i915 device info: has EU power gating: yes <6> [160.728459] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [160.728462] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [160.728465] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [160.729635] [drm:drm_client_modeset_probe] <7> [160.729890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [160.729936] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.730082] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [160.730097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [160.730109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.730223] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [160.730236] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [160.730247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.730361] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.730374] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [160.730379] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [160.730382] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [160.730385] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [160.730461] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [160.730473] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [160.730490] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [160.730507] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [160.734596] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [160.888178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [160.888578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [160.888773] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [160.888975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [160.889656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.775548] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [171.779824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [171.804257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [171.808448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.808582] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [171.808601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.808712] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [171.808725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.808845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [171.809182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [171.810011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [171.812834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [172.046830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [172.054448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [172.054803] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [172.054844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [172.055157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [172.055193] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [172.055501] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [172.055868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [172.056645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.057020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.057573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [172.058188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [172.058544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [172.058763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [172.058994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [172.059257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [172.090039] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [172.140695] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [172.486415] [IGT] Reloading i915 as normal <7> [172.629948] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [172.630135] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [172.630286] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [172.630418] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [172.630667] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [172.630826] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [172.631597] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [172.631766] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [172.631989] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [172.632170] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [172.632176] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [172.632474] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [172.632497] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [172.632688] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [172.633185] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [172.633407] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [172.633600] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [172.633819] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [172.634029] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [172.637805] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [172.638020] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [172.638232] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [172.638432] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [172.638648] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [172.638869] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [172.639040] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [172.639189] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [172.639339] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [172.639489] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [172.639637] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [172.639785] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [172.639994] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [172.640147] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [172.640571] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [172.640811] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [172.641042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [172.641253] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [172.641465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [172.641676] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [172.641917] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [172.642180] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [172.642405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [172.642611] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [172.642877] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [172.643134] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [172.643334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [172.643536] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [172.643757] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [172.643986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [172.644229] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [172.644434] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [172.644634] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [172.644882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [172.645138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [172.645344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [172.645549] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [172.645761] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [172.645964] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [172.646238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [172.646481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [172.646706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [172.646954] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [172.647657] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [172.647924] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [172.648194] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [172.648446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.648666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.648922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [172.649144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [172.649396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [172.649639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [172.649860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [172.650102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [172.650355] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [172.651506] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [172.652149] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [172.652697] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [172.652912] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [172.653163] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [172.653361] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [172.653557] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [172.653755] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [172.653961] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [172.654191] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [172.654386] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [172.654581] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [172.656440] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [172.657910] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [172.658262] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [172.658476] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [172.660789] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [172.661028] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [172.661240] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [172.661448] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [172.661659] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [172.661912] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [172.662118] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [172.662324] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [172.662529] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [172.662733] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [172.662988] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [172.663238] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [172.663542] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [172.663735] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [172.663977] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [172.664203] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [172.664392] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [172.664659] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [172.665130] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [172.665347] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [172.665624] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [172.665940] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [172.666208] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [172.666421] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [172.882791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.893786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.904790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.915785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.926785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.937785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.948790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.959786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.970785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.981787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [172.992798] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.003785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.014785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.025786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.036786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.047786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.058785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.069787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.080785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.091786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.102785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.113786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.124786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.135787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.146785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.157785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.168785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.179785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.190785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.201787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.212785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.223785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff) <7> [173.223958] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [173.223980] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [173.224047] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [173.224244] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [173.224435] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [173.224582] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [173.224986] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [173.225131] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [173.225325] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [173.225608] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [173.225748] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [173.225889] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [173.226130] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [173.226274] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [173.226665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [173.226835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [173.227061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [173.227204] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [173.227346] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [173.227488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [173.227629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [173.227769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [173.227917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [173.228091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [173.228232] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [173.228373] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [173.228582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [173.228718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [173.228861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [173.229032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [173.229211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [173.229363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [173.229532] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [173.229668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [173.229817] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [173.229998] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [173.230142] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [173.230286] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [173.230462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [173.230612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [173.230758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [173.230902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [173.231073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [173.231208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [173.231341] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [173.231486] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [173.231626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [173.231762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [173.231905] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [173.232084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [173.232223] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [173.232411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [173.232563] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [173.232735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [173.232920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [173.233152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [173.233295] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [173.233472] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [173.233611] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [173.233744] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [173.233912] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [173.234059] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [173.234181] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [173.234319] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [173.235257] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [173.235396] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [173.235530] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [173.245339] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [173.245588] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [173.245734] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [173.245918] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [173.246114] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [173.246299] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [173.246853] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [173.246978] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [173.247085] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [173.247189] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [173.249518] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [173.250395] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [173.250921] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [173.251712] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [173.252201] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [173.252269] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [173.253727] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [173.267064] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [173.269138] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [173.270193] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [173.270966] [drm:drm_client_modeset_probe] <7> [173.270919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [173.271152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [173.271296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [173.271347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.271368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [173.271585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [173.271933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [173.272276] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [173.272311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [173.272488] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [173.272492] i915 device info: graphics version: 9 <7> [173.272495] i915 device info: media version: 9 <7> [173.272497] i915 device info: display version: 9 <7> [173.272499] i915 device info: graphics stepping: F0 <7> [173.272501] i915 device info: media stepping: F0 <7> [173.272504] i915 device info: display stepping: C0 <7> [173.272506] i915 device info: base die stepping: <7> [173.272508] i915 device info: gt: 2 <7> [173.272510] i915 device info: memory-regions: 0x21 <7> [173.272512] i915 device info: page-sizes: 0x11000 <7> [173.272515] i915 device info: platform: KABYLAKE <7> [173.272517] i915 device info: ppgtt-size: 48 <7> [173.272525] i915 device info: ppgtt-type: 2 <7> [173.272527] i915 device info: dma_mask_size: 39 <7> [173.272530] i915 device info: is_mobile: no <7> [173.272532] i915 device info: is_lp: no <7> [173.272535] i915 device info: require_force_probe: no <7> [173.272537] i915 device info: is_dgfx: no <7> [173.272540] i915 device info: has_64bit_reloc: yes <7> [173.272542] i915 device info: has_64k_pages: no <7> [173.272545] i915 device info: gpu_reset_clobbers_display: no <7> [173.272548] i915 device info: has_reset_engine: yes <7> [173.272550] i915 device info: has_3d_pipeline: yes <7> [173.272553] i915 device info: has_4tile: no <7> [173.272555] i915 device info: has_flat_ccs: no <7> [173.272557] i915 device info: has_global_mocs: no <7> [173.272560] i915 device info: has_gmd_id: no <7> [173.272562] i915 device info: has_gt_uc: yes <7> [173.272565] i915 device info: has_heci_pxp: no <7> [173.272568] i915 device info: has_heci_gscfi: no <7> [173.272570] i915 device info: has_guc_deprivilege: no <7> [173.272573] i915 device info: has_l3_ccs_read: no <7> [173.272575] i915 device info: has_l3_dpf: no <7> [173.272578] i915 device info: has_llc: yes <7> [173.272580] i915 device info: has_logical_ring_contexts: yes <7> [173.272583] i915 device info: has_logical_ring_elsq: no <7> [173.272585] i915 device info: has_media_ratio_mode: no <7> [173.272588] i915 device info: has_mslice_steering: no <7> [173.272591] i915 device info: has_oa_bpc_reporting: no <7> [173.272593] i915 device info: has_oa_slice_contrib_limits: no <7> [173.272596] i915 device info: has_oam: no <7> [173.272598] i915 device info: has_one_eu_per_fuse_bit: no <7> [173.272600] i915 device info: has_pxp: no <7> [173.272603] i915 device info: has_rc6: yes <7> [173.272605] i915 device info: has_rc6p: no <7> [173.272608] i915 device info: has_rps: yes <7> [173.272610] i915 device info: has_runtime_pm: yes <7> [173.272613] i915 device info: has_snoop: no <7> [173.272615] i915 device info: has_coherent_ggtt: yes <7> [173.272618] i915 device info: tuning_thread_rr_after_dep: no <7> [173.272621] i915 device info: unfenced_needs_alignment: no <7> [173.272623] i915 device info: hws_needs_physical: no <7> [173.272626] i915 device info: has_pooled_eu: no <7> [173.272628] i915 device info: cursor_needs_physical: no <7> [173.272631] i915 device info: has_cdclk_crawl: no <7> [173.272633] i915 device info: has_cdclk_squash: no <7> [173.272636] i915 device info: has_ddi: yes <7> [173.272638] i915 device info: has_dp_mst: yes <7> [173.272641] i915 device info: has_dsb: no <7> [173.272643] i915 device info: has_fpga_dbg: yes <7> [173.272542] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.272646] i915 device info: has_gmch: no <7> [173.272648] i915 device info: has_hotplug: yes <7> [173.272650] i915 device info: has_hti: no <7> [173.272652] i915 device info: has_ipc: yes <7> [173.272654] i915 device info: has_overlay: no <7> [173.272656] i915 device info: has_psr: yes <7> [173.272658] i915 device info: has_psr_hw_tracking: yes <7> [173.272660] i915 device info: overlay_needs_physical: no <7> [173.272663] i915 device info: supports_tv: no <7> [173.272665] i915 device info: has_hdcp: yes <7> [173.272667] i915 device info: has_dmc: yes <7> [173.272669] i915 device info: has_dsc: no <7> [173.272670] i915 device info: rawclk rate: 24000 kHz <7> [173.272673] i915 device info: iommu: enabled <7> [173.272675] i915 device info: available engines: 40403 <7> [173.272677] i915 device info: slice total: 1, mask=0001 <7> [173.272679] i915 device info: subslice total: 3 <7> [173.272681] i915 device info: slice0: 3 subslices, mask=00000007 <7> [173.272684] i915 device info: slice1: 0 subslices, mask=00000000 <7> [173.272686] i915 device info: slice2: 0 subslices, mask=00000000 <7> [173.272688] i915 device info: EU total: 24 <7> [173.272690] i915 device info: EU per subslice: 8 <7> [173.272692] i915 device info: has slice power gating: no <7> [173.272694] i915 device info: has subslice power gating: no <7> [173.272696] i915 device info: has EU power gating: yes <6> [173.272699] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [173.272701] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [173.272703] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [173.272759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.273479] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.274026] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [173.274266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [173.274451] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [173.274472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.274729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.275284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [173.275831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [173.276389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [173.277896] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.278583] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.279413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [173.279673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [173.279917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.280156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.280863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.281132] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [173.281158] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [173.281177] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [173.281195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.281406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.283084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.283297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.284141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.284677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.284684] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.284953] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.315650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.315658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.315872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.316094] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [173.316114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.316125] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [173.316135] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [173.316138] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [173.316140] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [173.316266] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [173.316286] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [173.316307] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [173.316326] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [173.317119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.317277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [173.317768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [173.318401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [173.318551] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.318695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.319372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.319700] [drm:drm_client_modeset_probe] <7> [173.319952] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [173.319989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.320273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.321025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.321171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [173.321186] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [173.321197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.321318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.321856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [173.322515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [173.323114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [173.324644] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [173.324764] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.326016] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.326824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [173.327133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [173.327266] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.327434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.328610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.328753] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [173.328769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [173.328813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.328966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.331369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.331567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.332451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.333060] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.333069] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.333229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.360612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.360620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.360758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.360913] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.360930] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [173.360941] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [173.360944] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [173.360947] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [173.361089] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [173.361108] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [173.361261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [173.361312] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [173.361340] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [173.361283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.361576] [drm:drm_client_modeset_probe] <7> [173.361585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.362249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.362403] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [173.362419] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [173.362435] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.362622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.363149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.363334] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [173.363348] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [173.363359] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.363482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.363962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [173.364462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [173.365038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [173.366313] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.367420] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.368224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [173.368374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [173.368544] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.368743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.369362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.369523] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [173.369537] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [173.369549] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.369669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.370416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.370530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.371220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.371736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.371743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.371889] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.396501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.396506] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.396619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.396750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.396763] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [173.396765] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [173.396768] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [173.396770] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [173.396812] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [173.396820] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [173.396842] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [173.396861] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [173.396917] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [173.396935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.397070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.397583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [173.398099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [173.398642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [173.400085] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.401135] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.401885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [173.402134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [173.402277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.402411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.402993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.403123] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [173.403180] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [173.403191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.403307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.404553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.404714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.405486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.405980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.405984] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.406092] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.429045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.429050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.429163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.429292] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.431824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [173.431839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.431962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.432416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.432545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [173.432975] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [173.432989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.433124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.433584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [173.434117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [173.434658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [173.435762] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.436867] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.437494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [173.437640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [173.437769] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.437916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.438489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.438618] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [173.439072] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [173.439085] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.439205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.440762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.440954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.441652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.442192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.442197] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.442324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.466375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.466380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.466492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.466621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.466975] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [173.466988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.467121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.467610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.467764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [173.467799] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [173.467811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.467958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.468414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [173.468947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [173.469492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [173.470590] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.471675] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.472428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [173.472576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [173.472704] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.472851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.473426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.473570] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [173.473596] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [173.473607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.473723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.474836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.475400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.476168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.476621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.476624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.476731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.500804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.500809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.500934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.501063] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [184.542912] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.550925] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.574930] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.581595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.582186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.582548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.582998] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [184.583706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.584415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.584796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.585143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.586469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.587161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.587287] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.587409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.588021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.588216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.589222] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [184.589234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.592184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.616653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.622838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.623054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.623599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.624219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.624824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.626766] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.627468] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.627983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.628373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.628583] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.628815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.629489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.629719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.629751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.629971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.631525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.631711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.632508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.633002] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.633010] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.633136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.656581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.656586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.656698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.656995] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.657115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.657259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.657740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.658380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.658520] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.658642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.659244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.659401] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.659437] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [184.662310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.686687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.691249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.691381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.691513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.691963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.692520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.692655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.692803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.693388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.693534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.694063] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.696820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.721064] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.725865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.726015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.726527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.726711] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.726734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.726937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.727450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.727983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.728524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.729822] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.730826] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.731639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.731883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.732063] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.732239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.732886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.733085] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.733105] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.733272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.734427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.734583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.734942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.735432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.735439] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.735581] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.759572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.759577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.759687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.759899] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.759936] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.760053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.760539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.760668] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.760696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.760844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.761309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.761852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.762399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.763493] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.764515] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.765302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.765449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.765579] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.765706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.766323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.766460] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.766475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.766591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.767687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.767837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.769069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.769598] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.769602] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.769708] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.795967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.795972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.796084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.796214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.796230] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.800136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.005719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.010720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.011314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.011514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.011871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.012836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.013450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.013813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [185.014061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [185.014305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [185.014549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [185.014856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.014900] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.016171] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.017167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.017700] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.018077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.018696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.019020] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.019571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.019743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.019748] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.019900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.024233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.024238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.024350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.046748] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [185.088670] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [185.461500] [IGT] i915_pm_rpm: exiting, ret=0

<6> [147.802138] [IGT] i915_pm_rpm: executing

<7> [147.807281] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [147.807721] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [147.807738] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [147.808055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.808232] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.808357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.808955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.809253] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [147.809326] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [147.809338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [147.809504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.809984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [147.810478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.811081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [147.812534] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [147.813633] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [147.814389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [147.814607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.814737] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.814884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.815458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.815588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [147.815653] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [147.815665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [147.815789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.817543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.817664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [147.818351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.818871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.818898] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.819023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [147.845283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.845288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [147.845414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.845539] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [147.849124] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [147.849140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [147.849271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.849749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.849966] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [147.850374] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [147.850387] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [147.850507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.850971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [147.851482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.852051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [147.853143] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [147.854224] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [147.854982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [147.855137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.855263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.855385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.855968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.856097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [147.856518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [147.856531] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [147.856656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.857739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.857856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [147.858535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.859047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.859053] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.859164] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [147.884795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.884799] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [147.884968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.885094] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [147.885398] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [147.885411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [147.885527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.886028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.886157] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [147.886181] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [147.886192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [147.886310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.886777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [147.887306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.887861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [147.888816] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [147.889812] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [147.890564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [147.890709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.890860] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.890982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.891556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.891704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [147.891730] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [147.891741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [147.891903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.893471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.893592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [147.894308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.894817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.894822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.894980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [147.919579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.919584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [147.919692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.919846] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [158.963619] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [158.968833] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [158.991941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [158.997515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.998168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [158.998446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [158.999264] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [158.999453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.000044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [159.000450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.000684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.001307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.001951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [159.002172] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.002347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.002956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.003103] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [159.004124] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [159.005843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [159.030169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [159.035374] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [159.035657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.035823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.036277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.036871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [159.037012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.037152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.037742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.037942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [159.038840] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [159.038841] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [159.041576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [159.066049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [159.072446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [159.072679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.073468] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.074420] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.075264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [159.078160] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [159.078991] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [159.079642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [159.080255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [159.080587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.080933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.081720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.082032] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [159.082075] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [159.082265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.083643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [159.083836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [159.084605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [159.085139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [159.085147] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [159.085322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [159.117619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [159.117627] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [159.117830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.118042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [159.118072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [159.118275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.118834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.119041] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [159.119163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.119301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.119749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.120310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [159.120437] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.120559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.121144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.121370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [159.121943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [159.124359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [159.148678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [159.154538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [159.154645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.155172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.155710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.156314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [159.157585] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [159.158406] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [159.158913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [159.159148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [159.159361] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.159538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.160213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.160435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [159.160459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [159.160645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.161826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [159.162002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [159.162772] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [159.163854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [159.163860] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [159.164063] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [159.192022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [159.192032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [159.192216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.192415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [159.192450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [159.192628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.193212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.193423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [159.193446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [159.193622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.194184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.194694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.195274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [159.196675] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [159.197371] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [159.197926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [159.198143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [159.198330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.198513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.199707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.199914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [159.199936] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [159.200111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.201761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [159.201949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [159.202670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [159.203221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [159.203228] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [159.203394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [159.231329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [159.231336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [159.231501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.231690] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [159.231713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [159.234642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [159.323645] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [159.427980] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [159.432867] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [159.433457] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [159.433695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.434388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.434711] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [159.434748] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [159.434767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.435055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.435626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.436298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [159.436673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [159.436923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [159.437184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [159.437400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [159.438743] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [159.439518] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [159.440106] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [159.440137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [159.440670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [159.440895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [159.441367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [159.441595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [159.441603] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [159.441813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [159.446256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [159.446265] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [159.446470] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [159.472976] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [159.515743] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [159.904429] [IGT] Reloading i915 w/o display

<7> [160.090909] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [160.091141] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [160.091301] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [160.091445] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [160.091695] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [160.091879] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [160.092545] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [160.092663] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [160.092772] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [160.092922] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [160.092928] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [160.093290] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [160.093306] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [160.093440] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [160.093711] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [160.093945] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [160.094099] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [160.094233] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [160.094364] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [160.098499] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [160.098656] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [160.098834] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [160.098974] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [160.099110] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [160.099230] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [160.099328] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [160.099427] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [160.099522] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [160.099617] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [160.099711] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [160.099851] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [160.099947] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [160.100041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [160.100660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [160.100851] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [160.101046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [160.101192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [160.101340] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [160.101484] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [160.101627] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [160.101771] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [160.101973] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [160.102156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [160.102303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [160.102451] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [160.102595] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [160.102739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [160.102904] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [160.103102] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [160.103262] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [160.103404] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [160.103544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [160.103685] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [160.103864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [160.104042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [160.104181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [160.104322] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [160.104480] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [160.104683] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [160.104923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [160.105097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [160.105240] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [160.105717] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [160.105935] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [160.106113] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [160.106297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [160.106438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [160.106599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [160.106753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [160.106948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [160.107126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [160.107266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [160.107406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [160.107576] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [160.108523] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [160.108959] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [160.109370] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [160.109514] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [160.109652] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [160.109838] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [160.110048] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [160.110242] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [160.110412] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [160.110553] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [160.110688] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [160.110868] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [160.112053] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [160.113452] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [160.113730] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [160.114006] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [160.116762] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [160.116952] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [160.117098] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [160.117240] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [160.117387] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [160.117529] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [160.117688] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [160.117858] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [160.117998] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [160.118138] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [160.118278] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [160.118451] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [160.118651] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [160.118814] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [160.118962] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [160.119138] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [160.119326] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [160.119595] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [160.119976] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [160.120152] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [160.120358] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [160.120509] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [160.120696] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [160.120875] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [160.337788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.348790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.359788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.370787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.381788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.392790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.403787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.414789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.425787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.436790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.448506] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.458788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.469789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.480788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.491787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.502788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.513789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.524789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.535788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.546787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.557789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.568788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.579788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.590789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.601790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.612788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.623787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.634790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.645788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.656788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.667787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.678789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [160.678964] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [160.679003] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [160.679072] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [160.679271] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [160.679458] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [160.679602] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [160.680109] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [160.680300] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [160.680452] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [160.680740] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [160.680899] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [160.681074] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [160.681281] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [160.681425] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [160.681876] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [160.682116] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [160.682274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [160.682417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [160.682558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [160.682699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [160.682853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [160.683038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [160.683178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [160.683320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [160.683497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [160.683701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [160.683921] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [160.684164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [160.684324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [160.684502] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [160.684653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [160.684838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [160.685017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [160.685152] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [160.685295] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [160.685442] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [160.685587] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [160.685730] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [160.685939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [160.686106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [160.686253] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [160.686389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [160.686523] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [160.686658] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [160.686800] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [160.686987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [160.687126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [160.687263] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [160.687398] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [160.687542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [160.687725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [160.687967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [160.688211] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [160.688468] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [160.688656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [160.688853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [160.689065] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [160.689244] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.689384] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.689518] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.689678] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [160.689800] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [160.689998] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [160.690137] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [160.691116] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [160.691257] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [160.691392] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [160.701597] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [160.701926] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [160.702110] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [160.702250] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [160.702382] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [160.702561] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [160.703107] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [160.703217] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [160.703323] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [160.703427] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [160.705817] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [160.706839] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [160.707292] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [160.708100] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [160.708479] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [160.708642] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [160.710084] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [160.723043] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [160.724992] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [160.725528] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [160.726386] [drm:drm_client_modeset_probe]

<7> [160.726330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [160.726569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [160.726724] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [160.726775] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.726794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [160.727002] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [160.727007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [160.727302] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [160.727325] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [160.727343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.727546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [160.727571] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [160.727589] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [160.727607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.727700] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [160.727829] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [160.727852] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.727868] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [160.727876] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [160.727880] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [160.727883] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [160.727961] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [160.727982] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [160.728009] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [160.728036] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [160.728192] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [160.728198] i915 device info: graphics version: 9

<7> [160.728200] i915 device info: media version: 9

<7> [160.728203] i915 device info: display version: 9

<7> [160.728206] i915 device info: graphics stepping: F0

<7> [160.728208] i915 device info: media stepping: F0

<7> [160.728211] i915 device info: display stepping: C0

<7> [160.728213] i915 device info: base die stepping: **

<7> [160.728216] i915 device info: gt: 2

<7> [160.728218] i915 device info: memory-regions: 0x21

<7> [160.728221] i915 device info: page-sizes: 0x11000

<7> [160.728224] i915 device info: platform: KABYLAKE

<7> [160.728226] i915 device info: ppgtt-size: 48

<7> [160.728229] i915 device info: ppgtt-type: 2

<7> [160.728231] i915 device info: dma_mask_size: 39

<7> [160.728234] i915 device info: is_mobile: no

<7> [160.728236] i915 device info: is_lp: no

<7> [160.728239] i915 device info: require_force_probe: no

<7> [160.728241] i915 device info: is_dgfx: no

<7> [160.728244] i915 device info: has_64bit_reloc: yes

<7> [160.728246] i915 device info: has_64k_pages: no

<7> [160.728249] i915 device info: gpu_reset_clobbers_display: no

<7> [160.728251] i915 device info: has_reset_engine: yes

<7> [160.728253] i915 device info: has_3d_pipeline: yes

<7> [160.728256] i915 device info: has_4tile: no

<7> [160.728258] i915 device info: has_flat_ccs: no

<7> [160.728261] i915 device info: has_global_mocs: no

<7> [160.728263] i915 device info: has_gmd_id: no

<7> [160.728266] i915 device info: has_gt_uc: yes

<7> [160.728268] i915 device info: has_heci_pxp: no

<7> [160.728270] i915 device info: has_heci_gscfi: no

<7> [160.728273] i915 device info: has_guc_deprivilege: no

<7> [160.728275] i915 device info: has_l3_ccs_read: no

<7> [160.728278] i915 device info: has_l3_dpf: no

<7> [160.728280] i915 device info: has_llc: yes

<7> [160.728283] i915 device info: has_logical_ring_contexts: yes

<7> [160.728285] i915 device info: has_logical_ring_elsq: no

<7> [160.728287] i915 device info: has_media_ratio_mode: no

<7> [160.728290] i915 device info: has_mslice_steering: no

<7> [160.728292] i915 device info: has_oa_bpc_reporting: no

<7> [160.728295] i915 device info: has_oa_slice_contrib_limits: no

<7> [160.728297] i915 device info: has_oam: no

<7> [160.728299] i915 device info: has_one_eu_per_fuse_bit: no

<7> [160.728302] i915 device info: has_pxp: no

<7> [160.728304] i915 device info: has_rc6: yes

<7> [160.728307] i915 device info: has_rc6p: no

<7> [160.728309] i915 device info: has_rps: yes

<7> [160.728312] i915 device info: has_runtime_pm: yes

<7> [160.728314] i915 device info: has_snoop: no

<7> [160.728317] i915 device info: has_coherent_ggtt: yes

<7> [160.728320] i915 device info: tuning_thread_rr_after_dep: no

<7> [160.728322] i915 device info: unfenced_needs_alignment: no

<7> [160.728325] i915 device info: hws_needs_physical: no

<7> [160.728327] i915 device info: has_pooled_eu: no

<7> [160.728330] i915 device info: cursor_needs_physical: no

<7> [160.728332] i915 device info: has_cdclk_crawl: no

<7> [160.728334] i915 device info: has_cdclk_squash: no

<7> [160.728337] i915 device info: has_ddi: yes

<7> [160.728340] i915 device info: has_dp_mst: yes

<7> [160.728342] i915 device info: has_dsb: no

<7> [160.728345] i915 device info: has_fpga_dbg: yes

<7> [160.728347] i915 device info: has_gmch: no

<7> [160.728350] i915 device info: has_hotplug: yes

<7> [160.728352] i915 device info: has_hti: no

<7> [160.728355] i915 device info: has_ipc: yes

<7> [160.728357] i915 device info: has_overlay: no

<7> [160.728360] i915 device info: has_psr: yes

<7> [160.728362] i915 device info: has_psr_hw_tracking: yes

<7> [160.728364] i915 device info: overlay_needs_physical: no

<7> [160.728367] i915 device info: supports_tv: no

<7> [160.728369] i915 device info: has_hdcp: yes

<7> [160.728372] i915 device info: has_dmc: yes

<7> [160.728374] i915 device info: has_dsc: no

<7> [160.728377] i915 device info: rawclk rate: 24000 kHz

<7> [160.728379] i915 device info: iommu: enabled

<7> [160.728382] i915 device info: available engines: 40403

<7> [160.728385] i915 device info: slice total: 1, mask=0001

<7> [160.728388] i915 device info: subslice total: 3

<7> [160.728391] i915 device info: slice0: 3 subslices, mask=00000007

<7> [160.728394] i915 device info: slice1: 0 subslices, mask=00000000

<7> [160.728396] i915 device info: slice2: 0 subslices, mask=00000000

<7> [160.728399] i915 device info: EU total: 24

<7> [160.728401] i915 device info: EU per subslice: 8

<7> [160.728404] i915 device info: has slice power gating: no

<7> [160.728406] i915 device info: has subslice power gating: no

<7> [160.728409] i915 device info: has EU power gating: yes

<6> [160.728459] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [160.728462] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [160.728465] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [160.729635] [drm:drm_client_modeset_probe]

<7> [160.729890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [160.729936] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.730082] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [160.730097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [160.730109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.730223] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [160.730236] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [160.730247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.730361] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.730374] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [160.730379] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [160.730382] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [160.730385] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [160.730461] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [160.730473] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [160.730490] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [160.730507] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [160.734596] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [160.888178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [160.888578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [160.888773] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [160.888975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [160.889656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [171.775548] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [171.779824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [171.804257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [171.808448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.808582] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [171.808601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.808712] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [171.808725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.808845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [171.809182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [171.810011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [171.812834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [172.046830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [172.054448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [172.054803] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [172.054844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [172.055157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [172.055193] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [172.055501] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [172.055868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [172.056645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.057020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.057573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [172.058188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [172.058544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [172.058763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [172.058994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [172.059257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [172.090039] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [172.140695] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [172.486415] [IGT] Reloading i915 as normal

<7> [172.629948] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [172.630135] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [172.630286] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [172.630418] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [172.630667] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [172.630826] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [172.631597] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [172.631766] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [172.631989] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [172.632170] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [172.632176] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [172.632474] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [172.632497] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [172.632688] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [172.633185] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [172.633407] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [172.633600] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [172.633819] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [172.634029] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [172.637805] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [172.638020] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [172.638232] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [172.638432] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [172.638648] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [172.638869] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [172.639040] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [172.639189] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [172.639339] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [172.639489] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [172.639637] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [172.639785] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [172.639994] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [172.640147] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [172.640571] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [172.640811] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [172.641042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [172.641253] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [172.641465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [172.641676] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [172.641917] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [172.642180] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [172.642405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [172.642611] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [172.642877] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [172.643134] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [172.643334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [172.643536] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [172.643757] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [172.643986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [172.644229] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [172.644434] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [172.644634] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [172.644882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [172.645138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [172.645344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [172.645549] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [172.645761] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [172.645964] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [172.646238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [172.646481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [172.646706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [172.646954] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [172.647657] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [172.647924] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [172.648194] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [172.648446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.648666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.648922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [172.649144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [172.649396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [172.649639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [172.649860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [172.650102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [172.650355] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [172.651506] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [172.652149] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [172.652697] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [172.652912] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [172.653163] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [172.653361] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [172.653557] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [172.653755] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [172.653961] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [172.654191] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [172.654386] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [172.654581] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [172.656440] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [172.657910] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [172.658262] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [172.658476] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [172.660789] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [172.661028] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [172.661240] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [172.661448] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [172.661659] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [172.661912] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [172.662118] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [172.662324] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [172.662529] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [172.662733] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [172.662988] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [172.663238] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [172.663542] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [172.663735] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [172.663977] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [172.664203] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [172.664392] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [172.664659] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [172.665130] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [172.665347] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [172.665624] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [172.665940] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [172.666208] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [172.666421] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [172.882791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.893786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.904790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.915785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.926785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.937785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.948790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.959786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.970785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.981787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [172.992798] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.003785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.014785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.025786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.036786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.047786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.058785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.069787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.080785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.091786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.102785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.113786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.124786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.135787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.146785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.157785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.168785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.179785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.190785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.201787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.212785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.223785] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4002ff)

<7> [173.223958] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [173.223980] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [173.224047] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [173.224244] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [173.224435] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [173.224582] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [173.224986] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [173.225131] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [173.225325] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [173.225608] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [173.225748] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [173.225889] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [173.226130] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [173.226274] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [173.226665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [173.226835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [173.227061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [173.227204] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [173.227346] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [173.227488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [173.227629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [173.227769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [173.227917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [173.228091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [173.228232] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [173.228373] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [173.228582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [173.228718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [173.228861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [173.229032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [173.229211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [173.229363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [173.229532] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [173.229668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [173.229817] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [173.229998] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [173.230142] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [173.230286] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [173.230462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [173.230612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [173.230758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [173.230902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [173.231073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [173.231208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [173.231341] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [173.231486] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [173.231626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [173.231762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [173.231905] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [173.232084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [173.232223] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [173.232411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [173.232563] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [173.232735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [173.232920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [173.233152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [173.233295] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [173.233472] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [173.233611] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [173.233744] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [173.233912] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [173.234059] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [173.234181] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [173.234319] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [173.235257] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [173.235396] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [173.235530] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [173.245339] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [173.245588] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [173.245734] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [173.245918] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [173.246114] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [173.246299] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [173.246853] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [173.246978] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [173.247085] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [173.247189] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [173.249518] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [173.250395] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [173.250921] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [173.251712] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [173.252201] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [173.252269] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [173.253727] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [173.267064] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [173.269138] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [173.270193] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [173.270966] [drm:drm_client_modeset_probe]

<7> [173.270919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [173.271152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [173.271296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [173.271347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.271368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [173.271585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [173.271933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [173.272276] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [173.272311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [173.272488] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [173.272492] i915 device info: graphics version: 9

<7> [173.272495] i915 device info: media version: 9

<7> [173.272497] i915 device info: display version: 9

<7> [173.272499] i915 device info: graphics stepping: F0

<7> [173.272501] i915 device info: media stepping: F0

<7> [173.272504] i915 device info: display stepping: C0

<7> [173.272506] i915 device info: base die stepping: **

<7> [173.272508] i915 device info: gt: 2

<7> [173.272510] i915 device info: memory-regions: 0x21

<7> [173.272512] i915 device info: page-sizes: 0x11000

<7> [173.272515] i915 device info: platform: KABYLAKE

<7> [173.272517] i915 device info: ppgtt-size: 48

<7> [173.272525] i915 device info: ppgtt-type: 2

<7> [173.272527] i915 device info: dma_mask_size: 39

<7> [173.272530] i915 device info: is_mobile: no

<7> [173.272532] i915 device info: is_lp: no

<7> [173.272535] i915 device info: require_force_probe: no

<7> [173.272537] i915 device info: is_dgfx: no

<7> [173.272540] i915 device info: has_64bit_reloc: yes

<7> [173.272542] i915 device info: has_64k_pages: no

<7> [173.272545] i915 device info: gpu_reset_clobbers_display: no

<7> [173.272548] i915 device info: has_reset_engine: yes

<7> [173.272550] i915 device info: has_3d_pipeline: yes

<7> [173.272553] i915 device info: has_4tile: no

<7> [173.272555] i915 device info: has_flat_ccs: no

<7> [173.272557] i915 device info: has_global_mocs: no

<7> [173.272560] i915 device info: has_gmd_id: no

<7> [173.272562] i915 device info: has_gt_uc: yes

<7> [173.272565] i915 device info: has_heci_pxp: no

<7> [173.272568] i915 device info: has_heci_gscfi: no

<7> [173.272570] i915 device info: has_guc_deprivilege: no

<7> [173.272573] i915 device info: has_l3_ccs_read: no

<7> [173.272575] i915 device info: has_l3_dpf: no

<7> [173.272578] i915 device info: has_llc: yes

<7> [173.272580] i915 device info: has_logical_ring_contexts: yes

<7> [173.272583] i915 device info: has_logical_ring_elsq: no

<7> [173.272585] i915 device info: has_media_ratio_mode: no

<7> [173.272588] i915 device info: has_mslice_steering: no

<7> [173.272591] i915 device info: has_oa_bpc_reporting: no

<7> [173.272593] i915 device info: has_oa_slice_contrib_limits: no

<7> [173.272596] i915 device info: has_oam: no

<7> [173.272598] i915 device info: has_one_eu_per_fuse_bit: no

<7> [173.272600] i915 device info: has_pxp: no

<7> [173.272603] i915 device info: has_rc6: yes

<7> [173.272605] i915 device info: has_rc6p: no

<7> [173.272608] i915 device info: has_rps: yes

<7> [173.272610] i915 device info: has_runtime_pm: yes

<7> [173.272613] i915 device info: has_snoop: no

<7> [173.272615] i915 device info: has_coherent_ggtt: yes

<7> [173.272618] i915 device info: tuning_thread_rr_after_dep: no

<7> [173.272621] i915 device info: unfenced_needs_alignment: no

<7> [173.272623] i915 device info: hws_needs_physical: no

<7> [173.272626] i915 device info: has_pooled_eu: no

<7> [173.272628] i915 device info: cursor_needs_physical: no

<7> [173.272631] i915 device info: has_cdclk_crawl: no

<7> [173.272633] i915 device info: has_cdclk_squash: no

<7> [173.272636] i915 device info: has_ddi: yes

<7> [173.272638] i915 device info: has_dp_mst: yes

<7> [173.272641] i915 device info: has_dsb: no

<7> [173.272643] i915 device info: has_fpga_dbg: yes

<7> [173.272542] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.272646] i915 device info: has_gmch: no

<7> [173.272648] i915 device info: has_hotplug: yes

<7> [173.272650] i915 device info: has_hti: no

<7> [173.272652] i915 device info: has_ipc: yes

<7> [173.272654] i915 device info: has_overlay: no

<7> [173.272656] i915 device info: has_psr: yes

<7> [173.272658] i915 device info: has_psr_hw_tracking: yes

<7> [173.272660] i915 device info: overlay_needs_physical: no

<7> [173.272663] i915 device info: supports_tv: no

<7> [173.272665] i915 device info: has_hdcp: yes

<7> [173.272667] i915 device info: has_dmc: yes

<7> [173.272669] i915 device info: has_dsc: no

<7> [173.272670] i915 device info: rawclk rate: 24000 kHz

<7> [173.272673] i915 device info: iommu: enabled

<7> [173.272675] i915 device info: available engines: 40403

<7> [173.272677] i915 device info: slice total: 1, mask=0001

<7> [173.272679] i915 device info: subslice total: 3

<7> [173.272681] i915 device info: slice0: 3 subslices, mask=00000007

<7> [173.272684] i915 device info: slice1: 0 subslices, mask=00000000

<7> [173.272686] i915 device info: slice2: 0 subslices, mask=00000000

<7> [173.272688] i915 device info: EU total: 24

<7> [173.272690] i915 device info: EU per subslice: 8

<7> [173.272692] i915 device info: has slice power gating: no

<7> [173.272694] i915 device info: has subslice power gating: no

<7> [173.272696] i915 device info: has EU power gating: yes

<6> [173.272699] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [173.272701] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [173.272703] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [173.272759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.273479] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.274026] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [173.274266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [173.274451] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [173.274472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.274729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.275284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [173.275831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [173.276389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [173.277896] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.278583] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.279413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [173.279673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [173.279917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.280156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.280863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.281132] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [173.281158] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [173.281177] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [173.281195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.281406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.283084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.283297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.284141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.284677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.284684] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.284953] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.315650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.315658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.315872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.316094] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [173.316114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.316125] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [173.316135] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [173.316138] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [173.316140] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [173.316266] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [173.316286] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [173.316307] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [173.316326] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [173.317119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.317277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [173.317768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [173.318401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [173.318551] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.318695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.319372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.319700] [drm:drm_client_modeset_probe]

<7> [173.319952] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [173.319989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.320273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.321025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.321171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [173.321186] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [173.321197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.321318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.321856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [173.322515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [173.323114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [173.324644] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [173.324764] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.326016] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.326824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [173.327133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [173.327266] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.327434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.328610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.328753] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [173.328769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [173.328813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.328966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.331369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.331567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.332451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.333060] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.333069] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.333229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.360612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.360620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.360758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.360913] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.360930] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [173.360941] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [173.360944] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [173.360947] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [173.361089] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [173.361108] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [173.361261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [173.361312] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [173.361340] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [173.361283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.361576] [drm:drm_client_modeset_probe]

<7> [173.361585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.362249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.362403] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [173.362419] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [173.362435] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.362622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.363149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.363334] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [173.363348] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [173.363359] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.363482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.363962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [173.364462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [173.365038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [173.366313] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.367420] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.368224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [173.368374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [173.368544] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.368743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.369362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.369523] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [173.369537] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [173.369549] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.369669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.370416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.370530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.371220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.371736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.371743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.371889] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.396501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.396506] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.396619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.396750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.396763] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [173.396765] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [173.396768] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [173.396770] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [173.396812] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [173.396820] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [173.396842] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [173.396861] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [173.396917] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [173.396935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.397070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.397583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [173.398099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [173.398642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [173.400085] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.401135] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.401885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [173.402134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [173.402277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.402411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.402993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.403123] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [173.403180] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [173.403191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.403307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.404553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.404714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.405486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.405980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.405984] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.406092] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.429045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.429050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.429163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.429292] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.431824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [173.431839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.431962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.432416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.432545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [173.432975] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [173.432989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.433124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.433584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [173.434117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [173.434658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [173.435762] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.436867] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.437494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [173.437640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [173.437769] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.437916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.438489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.438618] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [173.439072] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [173.439085] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.439205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.440762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.440954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.441652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.442192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.442197] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.442324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.466375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.466380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.466492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.466621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.466975] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [173.466988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.467121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.467610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.467764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [173.467799] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [173.467811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.467958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.468414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [173.468947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [173.469492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [173.470590] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.471675] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.472428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [173.472576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [173.472704] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.472851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.473426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.473570] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [173.473596] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [173.473607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.473723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.474836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.475400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.476168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.476621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.476624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.476731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.500804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.500809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.500934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.501063] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [184.542912] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [184.550925] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [184.574930] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [184.581595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [184.582186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [184.582548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.582998] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [184.583706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.584415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [184.584796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.585143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [184.586469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [184.587161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [184.587287] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [184.587409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [184.588021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.588216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [184.589222] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [184.589234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [184.592184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [184.616653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [184.622838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [184.623054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.623599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [184.624219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [184.624824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [184.626766] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [184.627468] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [184.627983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [184.628373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [184.628583] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [184.628815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [184.629489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.629719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [184.629751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [184.629971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.631525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [184.631711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [184.632508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [184.633002] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [184.633010] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [184.633136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [184.656581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [184.656586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [184.656698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.656995] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [184.657115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.657259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [184.657740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [184.658380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [184.658520] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [184.658642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [184.659244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.659401] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [184.659437] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [184.662310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [184.686687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [184.691249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [184.691381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.691513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [184.691963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [184.692520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [184.692655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [184.692803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [184.693388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.693534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [184.694063] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [184.696820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [184.721064] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [184.725865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [184.726015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.726527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.726711] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [184.726734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [184.726937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.727450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [184.727983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [184.728524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [184.729822] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [184.730826] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [184.731639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [184.731883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [184.732063] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [184.732239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [184.732886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.733085] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [184.733105] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [184.733272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.734427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [184.734583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [184.734942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [184.735432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [184.735439] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [184.735581] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [184.759572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [184.759577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [184.759687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.759899] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [184.759936] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [184.760053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.760539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.760668] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [184.760696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [184.760844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.761309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [184.761852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [184.762399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [184.763493] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [184.764515] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [184.765302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [184.765449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [184.765579] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [184.765706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [184.766323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.766460] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [184.766475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [184.766591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.767687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [184.767837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [184.769069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [184.769598] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [184.769602] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [184.769708] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [184.795967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [184.795972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [184.796084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.796214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [184.796230] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [184.800136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [185.005719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [185.010720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [185.011314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [185.011514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.011871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.012836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.013450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [185.013813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [185.014061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [185.014305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [185.014549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [185.014856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [185.014900] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [185.016171] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [185.017167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [185.017700] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [185.018077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [185.018696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [185.019020] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [185.019571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [185.019743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [185.019748] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [185.019900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [185.024233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [185.024238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [185.024350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [185.046748] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [185.088670] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [185.461500] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload