igt@i915_selftest@live@objects on fi-apl-guc@linus-v6.4-rc3 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g0f0754413 (x86_64) (Linux: 6.4.0-rc3-linus-v6.4-rc3-g44c026a73be8+ x86_64)
Out	Starting dynamic subtest: objects Dynamic subtest objects: SUCCESS (4.444s)
Err	Starting dynamic subtest: objects Dynamic subtest objects: SUCCESS (4.444s)
Dmesg	<6> [380.357008] [IGT] i915_selftest: starting dynamic subtest objects <5> [380.647923] Setting dangerous option enable_guc - tainting kernel <5> [380.647940] Setting dangerous option enable_guc - tainting kernel <5> [380.647953] Setting dangerous option live_selftests - tainting kernel <7> [380.768671] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [380.769370] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [380.770110] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [380.770205] i915 0000:00:02.0: [drm:intel_detect_pch [i915]] No PCH found. <7> [380.771610] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [380.772573] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [380.774053] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 266667 kHz <7> [380.775750] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [380.776250] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [380.776852] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [380.777324] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [380.777340] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [380.778346] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [380.778436] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [380.779099] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [380.780242] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79871018 <7> [380.780942] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [380.781581] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [380.782076] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [380.782667] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [380.783189] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH1 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3 <7> [380.783718] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH2 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3 <7> [380.784210] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [380.784677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [380.786308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz <7> [380.786933] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT BROXTON ", BDB version 207 <7> [380.787517] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [380.788127] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [380.788795] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [380.789406] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [380.789990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [380.790632] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [380.791164] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [380.791821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [380.792435] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [380.793018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [380.793646] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [380.794209] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [380.794914] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [380.795547] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [380.796130] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [380.796762] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [380.797326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0 <7> [380.797991] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [380.798542] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [380.799052] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0 <7> [380.799569] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 09 <7> [380.800191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [380.801008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [380.801678] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6 <7> [380.802217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [380.802952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [380.803650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [380.804182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [380.804737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [380.805424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a <7> [380.806153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 1 already enabled, won't reprogram it <7> [380.806715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc <7> [380.807288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 0 already enabled, won't reprogram it <7> [380.807904] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/bxt_dmc_ver1_07.bin <6> [380.810146] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <7> [380.810162] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <6> [380.811200] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7) <7> [380.811551] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 0 us <7> [380.812241] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7> [380.812921] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7 (7.0 usec) <7> [380.813433] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8 (8.0 usec) <7> [380.813975] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec) <7> [380.814507] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22 (22.0 usec) <7> [380.815005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22 (22.0 usec) <7> [380.815441] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22 (22.0 usec) <7> [380.816057] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22 (22.0 usec) <7> [380.826231] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [380.830300] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6 <7> [380.831241] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000 kHz <7> [380.831916] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 624000 kHz <7> [380.832437] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present <7> [380.832994] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon <7> [380.833603] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI B/PHY B] using AUX B (VBT) <7> [380.834173] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:110:DDI B/PHY B] <7> [380.835527] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [380.836144] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:122:DDI C/PHY C] using AUX C (VBT) <7> [380.836782] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:122:DDI C/PHY C] <7> [380.837848] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [380.838374] i915 0000:00:02.0: [drm:vlv_dsi_init [i915]] <7> [380.839907] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled <7> [380.840600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe B] hw state readout: disabled <7> [380.841236] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled <7> [380.841940] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [380.842536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [380.843153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] hw state readout: disabled, pipe A <7> [380.843837] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] hw state readout: disabled, pipe A <7> [380.844426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B <7> [380.845138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [380.845772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] hw state readout: disabled, pipe B <7> [380.846299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] hw state readout: disabled, pipe B <7> [380.846899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] hw state readout: disabled, pipe C <7> [380.847567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] hw state readout: disabled, pipe C <7> [380.848126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] hw state readout: disabled, pipe C <7> [380.848722] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI B/PHY B] hw state readout: disabled, pipe A <7> [380.849224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST A] hw state readout: disabled, pipe A <7> [380.849841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DP-MST B] hw state readout: disabled, pipe B <7> [380.850351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:114:DP-MST C] hw state readout: disabled, pipe C <7> [380.850943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DDI C/PHY C] hw state readout: disabled, pipe A <7> [380.851498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:124:DP-MST A] hw state readout: disabled, pipe A <7> [380.851999] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:125:DP-MST B] hw state readout: disabled, pipe B <7> [380.852560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:126:DP-MST C] hw state readout: disabled, pipe C <7> [380.853115] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL A hw state readout: pipe_mask 0x0, on 0 <7> [380.853697] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL B hw state readout: pipe_mask 0x0, on 0 <7> [380.854235] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL C hw state readout: pipe_mask 0x0, on 0 <7> [380.855013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:DP-1] hw state readout: disabled <7> [380.855627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:DP-2] hw state readout: disabled <7> [380.856134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [380.856645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [380.857138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] min_cdclk 0 kHz <7> [380.857688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] min_cdclk 0 kHz <7> [380.858202] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [380.858720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz <7> [380.859199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [380.859750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] min_cdclk 0 kHz <7> [380.860249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] min_cdclk 0 kHz <7> [380.860748] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [380.861242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] min_cdclk 0 kHz <7> [380.861808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] min_cdclk 0 kHz <7> [380.862305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] min_cdclk 0 kHz <7> [380.862810] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [380.863408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state] <7> [380.864034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe B] enable: no [setup_hw_state] <7> [380.864594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state] <7> [380.865097] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [380.865607] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:88:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [380.866155] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [380.873513] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [176K, 824K) <7> [380.874080] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [380.874650] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [380.875251] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:1 = 1000000 <7> [380.875908] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 3 GT workarounds on global <7> [380.878733] i915 0000:00:02.0: [drm:intel_rc6_init [i915]] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 0 <7> [380.880756] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 9 engine workarounds on rcs'0 <7> [380.881336] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [380.881949] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0 <7> [380.896400] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [380.897172] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [380.973096] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd204f <7> [380.973715] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [380.974215] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [380.974936] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [380.975723] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a6 <7> [380.976306] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x5a85000b <7> [380.976942] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [380.977528] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [380.978033] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [380.978687] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [380.979212] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [380.979820] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [380.980364] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [380.980936] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [380.981532] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [380.985241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/bxt_guc_70.1.1.bin version 70.1.1 <6> [380.985261] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/bxt_huc_2.0.0.bin version 2.0.0 <7> [381.000551] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 100MHz, before = 100MHz, status = 0x8000F0EC, count = 0, ret = 0 <7> [381.003398] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [381.004506] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [381.004520] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [381.004526] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [381.039861] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:59:pipe A] not active, skipping <7> [381.040401] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:88:pipe B] not active, skipping <7> [381.041011] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:109:pipe C] not active, skipping <7> [381.041608] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [381.042169] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [381.044078] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [381.044674] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [381.045205] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [381.045853] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [381.055978] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [381.061214] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2 <7> [381.066622] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.069821] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.071318] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.073042] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.074517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.076465] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.077738] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.079711] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.080893] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.082517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.083791] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [381.084778] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.086516] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.088306] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.089855] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.091750] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.092906] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.094503] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.096517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.098334] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.100354] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.101521] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.103518] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.104834] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.106423] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.107715] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0) <7> [381.107751] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected <7> [381.109780] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.111111] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.112850] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.114517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.116114] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.117517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.118851] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.120685] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.122431] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.124131] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.125504] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.126652] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.128528] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.129998] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.131938] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.133080] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.134505] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.136357] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.137532] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.140744] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.142315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [381.143255] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON <7> [381.144842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04 <7> [381.145674] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000 <7> [381.145715] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips <7> [381.146222] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init <7> [381.147497] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR <7> [381.148031] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:DP-1] generating connector hotplug event <7> [381.149320] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [381.151641] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:DP-2] generating connector hotplug event <6> [381.151802] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [381.157366] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 2 outputs detected <6> [381.187964] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [381.193749] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input53 <7> [381.195566] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [381.197335] [drm:drm_client_modeset_probe] <7> [381.197439] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] <7> [381.197324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-a <7> [381.197780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1] <7> [381.198333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] status updated from unknown to disconnected <7> [381.198411] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] disconnected <7> [381.198502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] <7> [381.198548] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2] <7> [381.199089] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] status updated from unknown to disconnected <7> [381.199153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] disconnected <7> [381.199198] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [381.199212] [drm:drm_client_modeset_probe] connector 111 enabled? no <7> [381.199220] [drm:drm_client_modeset_probe] connector 123 enabled? no <7> [381.199307] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [381.199337] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [381.199382] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [381.199428] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [381.199485] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [381.200432] i915 device info: pciid=0x5a85 rev=0x0b platform=BROXTON (subplatform=0x0) gen=9 <7> [381.200489] i915 device info: graphics version: 9 <7> [381.200495] i915 device info: media version: 9 <7> [381.200500] i915 device info: display version: 9 <7> [381.200505] i915 device info: graphics stepping: C0 <7> [381.200510] i915 device info: media stepping: C0 <7> [381.200515] i915 device info: display stepping: C0 <7> [381.200519] i915 device info: base die stepping: ** <7> [381.200524] i915 device info: gt: 0 <7> [381.200528] i915 device info: memory-regions: 0x21 <7> [381.200533] i915 device info: page-sizes: 0x11000 <7> [381.200537] i915 device info: platform: BROXTON <7> [381.200542] i915 device info: ppgtt-size: 48 <7> [381.200546] i915 device info: ppgtt-type: 2 <7> [381.200551] i915 device info: dma_mask_size: 39 <7> [381.200555] i915 device info: is_mobile: no <7> [381.200809] i915 device info: is_lp: yes <7> [381.200817] i915 device info: require_force_probe: no <7> [381.200822] i915 device info: is_dgfx: no <7> [381.200826] i915 device info: has_64bit_reloc: yes <7> [381.200831] i915 device info: has_64k_pages: no <7> [381.200835] i915 device info: gpu_reset_clobbers_display: no <7> [381.200839] i915 device info: has_reset_engine: yes <7> [381.200844] i915 device info: has_3d_pipeline: yes <7> [381.200848] i915 device info: has_4tile: no <7> [381.200853] i915 device info: has_flat_ccs: no <7> [381.200858] i915 device info: has_global_mocs: no <7> [381.200862] i915 device info: has_gmd_id: no <7> [381.200867] i915 device info: has_gt_uc: yes <7> [381.200871] i915 device info: has_heci_pxp: no <7> [381.200876] i915 device info: has_heci_gscfi: no <7> [381.200880] i915 device info: has_guc_deprivilege: no <7> [381.200885] i915 device info: has_l3_ccs_read: no <7> [381.200889] i915 device info: has_l3_dpf: no <7> [381.200894] i915 device info: has_llc: no <7> [381.200898] i915 device info: has_logical_ring_contexts: yes <7> [381.200903] i915 device info: has_logical_ring_elsq: no <7> [381.200907] i915 device info: has_media_ratio_mode: no <7> [381.200912] i915 device info: has_mslice_steering: no <7> [381.200916] i915 device info: has_oa_bpc_reporting: no <7> [381.200921] i915 device info: has_oa_slice_contrib_limits: no <7> [381.200926] i915 device info: has_oam: no <7> [381.200930] i915 device info: has_one_eu_per_fuse_bit: no <7> [381.200935] i915 device info: has_pxp: no <7> [381.200939] i915 device info: has_rc6: yes <7> [381.200943] i915 device info: has_rc6p: no <7> [381.200948] i915 device info: has_rps: yes <7> [381.200952] i915 device info: has_runtime_pm: yes <7> [381.200957] i915 device info: has_snoop: yes <7> [381.200961] i915 device info: has_coherent_ggtt: no <7> [381.200966] i915 device info: tuning_thread_rr_after_dep: no <7> [381.200970] i915 device info: unfenced_needs_alignment: no <7> [381.200975] i915 device info: hws_needs_physical: no <7> [381.200979] i915 device info: has_pooled_eu: no <7> [381.200984] i915 device info: cursor_needs_physical: no <7> [381.200988] i915 device info: has_cdclk_crawl: no <7> [381.200993] i915 device info: has_cdclk_squash: no <7> [381.200997] i915 device info: has_ddi: yes <7> [381.201001] i915 device info: has_dp_mst: yes <7> [381.201006] i915 device info: has_dsb: no <7> [381.201010] i915 device info: has_fpga_dbg: yes <7> [381.201015] i915 device info: has_gmch: no <7> [381.201019] i915 device info: has_hotplug: yes <7> [381.201024] i915 device info: has_hti: no <7> [381.201028] i915 device info: has_ipc: yes <7> [381.201033] i915 device info: has_overlay: no <7> [381.201037] i915 device info: has_psr: yes <7> [381.201041] i915 device info: has_psr_hw_tracking: yes <7> [381.201046] i915 device info: overlay_needs_physical: no <7> [381.201051] i915 device info: supports_tv: no <7> [381.201055] i915 device info: has_hdcp: yes <7> [381.201060] i915 device info: has_dmc: yes <7> [381.201064] i915 device info: has_dsc: no <7> [381.201068] i915 device info: rawclk rate: 266667 kHz <7> [381.201074] i915 device info: iommu: enabled <7> [381.201079] i915 device info: available engines: 40403 <7> [381.201084] i915 device info: slice total: 1, mask=0001 <7> [381.201090] i915 device info: subslice total: 2 <7> [381.201094] i915 device info: slice0: 2 subslices, mask=00000006 <7> [381.201100] i915 device info: EU total: 12 <7> [381.201104] i915 device info: EU per subslice: 6 <7> [381.201109] i915 device info: has slice power gating: no <7> [381.201113] i915 device info: has subslice power gating: yes <7> [381.201118] i915 device info: has EU power gating: yes <6> [381.201124] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [381.201129] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [381.201134] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [381.201143] i915: Performing live selftests with st_random_seed=0x1bd26c4f st_timeout=500 <6> [381.201149] i915: Running objects <7> [381.201150] [drm:drm_client_modeset_probe] <6> [381.201207] i915: Running i915_gem_object_live_selftests/igt_gem_huge <7> [381.201239] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] <7> [381.201292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1] <7> [381.201924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] disconnected <7> [381.201984] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] <7> [381.202026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2] <7> [381.202653] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] disconnected <7> [381.202709] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [381.202721] [drm:drm_client_modeset_probe] connector 111 enabled? no <7> [381.202729] [drm:drm_client_modeset_probe] connector 123 enabled? no <7> [381.202816] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [381.202877] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [381.202922] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [381.202967] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [381.255565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-bc <7> [381.256507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [381.257541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [381.258134] i915 0000:00:02.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5 <7> [381.258773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01 <7> [381.259873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [384.118958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [384.119651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [384.120412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00 <7> [384.121282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [384.122342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a <7> [384.123049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc <7> [384.144832] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [384.211394] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [384.313593] i915: probe of 0000:00:02.0 failed with error -25

<6> [380.357008] [IGT] i915_selftest: starting dynamic subtest objects

<5> [380.647923] Setting dangerous option enable_guc - tainting kernel

<5> [380.647940] Setting dangerous option enable_guc - tainting kernel

<5> [380.647953] Setting dangerous option live_selftests - tainting kernel

<7> [380.768671] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [380.769370] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [380.770110] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [380.770205] i915 0000:00:02.0: [drm:intel_detect_pch [i915]] No PCH found.

<7> [380.771610] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [380.772573] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [380.774053] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 266667 kHz

<7> [380.775750] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [380.776250] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [380.776852] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [380.777324] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [380.777340] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [380.778346] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [380.778436] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [380.779099] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [380.780242] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79871018

<7> [380.780942] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [380.781581] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [380.782076] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [380.782667] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [380.783189] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH1 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3

<7> [380.783718] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH2 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3

<7> [380.784210] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [380.784677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [380.786308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz

<7> [380.786933] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT BROXTON ", BDB version 207

<7> [380.787517] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [380.788127] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [380.788795] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [380.789406] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [380.789990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [380.790632] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [380.791164] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [380.791821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [380.792435] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [380.793018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [380.793646] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [380.794209] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [380.794914] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [380.795547] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [380.796130] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [380.796762] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [380.797326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0

<7> [380.797991] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [380.798542] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [380.799052] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0

<7> [380.799569] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 09

<7> [380.800191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [380.801008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [380.801678] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6

<7> [380.802217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [380.802952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [380.803650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [380.804182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [380.804737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [380.805424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a

<7> [380.806153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 1 already enabled, won't reprogram it

<7> [380.806715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc

<7> [380.807288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 0 already enabled, won't reprogram it

<7> [380.807904] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/bxt_dmc_ver1_07.bin

<6> [380.810146] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<7> [380.810162] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<6> [380.811200] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)

<7> [380.811551] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 0 us

<7> [380.812241] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)

<7> [380.812921] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7 (7.0 usec)

<7> [380.813433] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8 (8.0 usec)

<7> [380.813975] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec)

<7> [380.814507] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22 (22.0 usec)

<7> [380.815005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22 (22.0 usec)

<7> [380.815441] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22 (22.0 usec)

<7> [380.816057] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22 (22.0 usec)

<7> [380.826231] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [380.830300] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6

<7> [380.831241] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000 kHz

<7> [380.831916] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 624000 kHz

<7> [380.832437] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present

<7> [380.832994] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon

<7> [380.833603] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI B/PHY B] using AUX B (VBT)

<7> [380.834173] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:110:DDI B/PHY B]

<7> [380.835527] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [380.836144] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:122:DDI C/PHY C] using AUX C (VBT)

<7> [380.836782] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:122:DDI C/PHY C]

<7> [380.837848] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [380.838374] i915 0000:00:02.0: [drm:vlv_dsi_init [i915]]

<7> [380.839907] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled

<7> [380.840600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe B] hw state readout: disabled

<7> [380.841236] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled

<7> [380.841940] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [380.842536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [380.843153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] hw state readout: disabled, pipe A

<7> [380.843837] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] hw state readout: disabled, pipe A

<7> [380.844426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B

<7> [380.845138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [380.845772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] hw state readout: disabled, pipe B

<7> [380.846299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] hw state readout: disabled, pipe B

<7> [380.846899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] hw state readout: disabled, pipe C

<7> [380.847567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] hw state readout: disabled, pipe C

<7> [380.848126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] hw state readout: disabled, pipe C

<7> [380.848722] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [380.849224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST A] hw state readout: disabled, pipe A

<7> [380.849841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DP-MST B] hw state readout: disabled, pipe B

<7> [380.850351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:114:DP-MST C] hw state readout: disabled, pipe C

<7> [380.850943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [380.851498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:124:DP-MST A] hw state readout: disabled, pipe A

<7> [380.851999] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:125:DP-MST B] hw state readout: disabled, pipe B

<7> [380.852560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:126:DP-MST C] hw state readout: disabled, pipe C

<7> [380.853115] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL A hw state readout: pipe_mask 0x0, on 0

<7> [380.853697] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL B hw state readout: pipe_mask 0x0, on 0

<7> [380.854235] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL C hw state readout: pipe_mask 0x0, on 0

<7> [380.855013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:DP-1] hw state readout: disabled

<7> [380.855627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:DP-2] hw state readout: disabled

<7> [380.856134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [380.856645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [380.857138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] min_cdclk 0 kHz

<7> [380.857688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] min_cdclk 0 kHz

<7> [380.858202] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [380.858720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz

<7> [380.859199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [380.859750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] min_cdclk 0 kHz

<7> [380.860249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] min_cdclk 0 kHz

<7> [380.860748] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [380.861242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] min_cdclk 0 kHz

<7> [380.861808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] min_cdclk 0 kHz

<7> [380.862305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] min_cdclk 0 kHz

<7> [380.862810] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [380.863408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]

<7> [380.864034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe B] enable: no [setup_hw_state]

<7> [380.864594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]

<7> [380.865097] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [380.865607] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:88:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [380.866155] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [380.873513] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [176K, 824K)

<7> [380.874080] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [380.874650] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [380.875251] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:1 = 1000000

<7> [380.875908] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 3 GT workarounds on global

<7> [380.878733] i915 0000:00:02.0: [drm:intel_rc6_init [i915]] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 0

<7> [380.880756] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 9 engine workarounds on rcs'0

<7> [380.881336] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [380.881949] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0

<7> [380.896400] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [380.897172] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [380.973096] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd204f

<7> [380.973715] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [380.974215] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [380.974936] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [380.975723] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a6

<7> [380.976306] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x5a85000b

<7> [380.976942] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [380.977528] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [380.978033] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [380.978687] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [380.979212] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [380.979820] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [380.980364] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [380.980936] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [380.981532] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [380.985241] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/bxt_guc_70.1.1.bin version 70.1.1

<6> [380.985261] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/bxt_huc_2.0.0.bin version 2.0.0

<7> [381.000551] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 100MHz, before = 100MHz, status = 0x8000F0EC, count = 0, ret = 0

<7> [381.003398] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [381.004506] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [381.004520] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [381.004526] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [381.039861] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:59:pipe A] not active, skipping

<7> [381.040401] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:88:pipe B] not active, skipping

<7> [381.041011] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:109:pipe C] not active, skipping

<7> [381.041608] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [381.042169] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [381.044078] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [381.044674] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [381.045205] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [381.045853] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [381.055978] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [381.061214] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2

<7> [381.066622] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.069821] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.071318] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.073042] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.074517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.076465] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.077738] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.079711] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.080893] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.082517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.083791] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [381.084778] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.086516] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.088306] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.089855] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.091750] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.092906] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.094503] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.096517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.098334] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.100354] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.101521] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.103518] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.104834] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.106423] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.107715] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0)

<7> [381.107751] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected

<7> [381.109780] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.111111] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.112850] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.114517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.116114] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.117517] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.118851] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.120685] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.122431] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.124131] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.125504] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.126652] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.128528] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.129998] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.131938] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.133080] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.134505] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.136357] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.137532] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.140744] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.142315] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [381.143255] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON

<7> [381.144842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04

<7> [381.145674] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000

<7> [381.145715] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips

<7> [381.146222] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init

<7> [381.147497] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR

<7> [381.148031] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:DP-1] generating connector hotplug event

<7> [381.149320] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [381.151641] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:DP-2] generating connector hotplug event

<6> [381.151802] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [381.157366] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 2 outputs detected

<6> [381.187964] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [381.193749] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input53

<7> [381.195566] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [381.197335] [drm:drm_client_modeset_probe]

<7> [381.197439] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1]

<7> [381.197324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-a

<7> [381.197780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1]

<7> [381.198333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] status updated from unknown to disconnected

<7> [381.198411] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] disconnected

<7> [381.198502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2]

<7> [381.198548] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2]

<7> [381.199089] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] status updated from unknown to disconnected

<7> [381.199153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] disconnected

<7> [381.199198] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [381.199212] [drm:drm_client_modeset_probe] connector 111 enabled? no

<7> [381.199220] [drm:drm_client_modeset_probe] connector 123 enabled? no

<7> [381.199307] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [381.199337] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [381.199382] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [381.199428] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [381.199485] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [381.200432] i915 device info: pciid=0x5a85 rev=0x0b platform=BROXTON (subplatform=0x0) gen=9

<7> [381.200489] i915 device info: graphics version: 9

<7> [381.200495] i915 device info: media version: 9

<7> [381.200500] i915 device info: display version: 9

<7> [381.200505] i915 device info: graphics stepping: C0

<7> [381.200510] i915 device info: media stepping: C0

<7> [381.200515] i915 device info: display stepping: C0

<7> [381.200519] i915 device info: base die stepping: **

<7> [381.200524] i915 device info: gt: 0

<7> [381.200528] i915 device info: memory-regions: 0x21

<7> [381.200533] i915 device info: page-sizes: 0x11000

<7> [381.200537] i915 device info: platform: BROXTON

<7> [381.200542] i915 device info: ppgtt-size: 48

<7> [381.200546] i915 device info: ppgtt-type: 2

<7> [381.200551] i915 device info: dma_mask_size: 39

<7> [381.200555] i915 device info: is_mobile: no

<7> [381.200809] i915 device info: is_lp: yes

<7> [381.200817] i915 device info: require_force_probe: no

<7> [381.200822] i915 device info: is_dgfx: no

<7> [381.200826] i915 device info: has_64bit_reloc: yes

<7> [381.200831] i915 device info: has_64k_pages: no

<7> [381.200835] i915 device info: gpu_reset_clobbers_display: no

<7> [381.200839] i915 device info: has_reset_engine: yes

<7> [381.200844] i915 device info: has_3d_pipeline: yes

<7> [381.200848] i915 device info: has_4tile: no

<7> [381.200853] i915 device info: has_flat_ccs: no

<7> [381.200858] i915 device info: has_global_mocs: no

<7> [381.200862] i915 device info: has_gmd_id: no

<7> [381.200867] i915 device info: has_gt_uc: yes

<7> [381.200871] i915 device info: has_heci_pxp: no

<7> [381.200876] i915 device info: has_heci_gscfi: no

<7> [381.200880] i915 device info: has_guc_deprivilege: no

<7> [381.200885] i915 device info: has_l3_ccs_read: no

<7> [381.200889] i915 device info: has_l3_dpf: no

<7> [381.200894] i915 device info: has_llc: no

<7> [381.200898] i915 device info: has_logical_ring_contexts: yes

<7> [381.200903] i915 device info: has_logical_ring_elsq: no

<7> [381.200907] i915 device info: has_media_ratio_mode: no

<7> [381.200912] i915 device info: has_mslice_steering: no

<7> [381.200916] i915 device info: has_oa_bpc_reporting: no

<7> [381.200921] i915 device info: has_oa_slice_contrib_limits: no

<7> [381.200926] i915 device info: has_oam: no

<7> [381.200930] i915 device info: has_one_eu_per_fuse_bit: no

<7> [381.200935] i915 device info: has_pxp: no

<7> [381.200939] i915 device info: has_rc6: yes

<7> [381.200943] i915 device info: has_rc6p: no

<7> [381.200948] i915 device info: has_rps: yes

<7> [381.200952] i915 device info: has_runtime_pm: yes

<7> [381.200957] i915 device info: has_snoop: yes

<7> [381.200961] i915 device info: has_coherent_ggtt: no

<7> [381.200966] i915 device info: tuning_thread_rr_after_dep: no

<7> [381.200970] i915 device info: unfenced_needs_alignment: no

<7> [381.200975] i915 device info: hws_needs_physical: no

<7> [381.200979] i915 device info: has_pooled_eu: no

<7> [381.200984] i915 device info: cursor_needs_physical: no

<7> [381.200988] i915 device info: has_cdclk_crawl: no

<7> [381.200993] i915 device info: has_cdclk_squash: no

<7> [381.200997] i915 device info: has_ddi: yes

<7> [381.201001] i915 device info: has_dp_mst: yes

<7> [381.201006] i915 device info: has_dsb: no

<7> [381.201010] i915 device info: has_fpga_dbg: yes

<7> [381.201015] i915 device info: has_gmch: no

<7> [381.201019] i915 device info: has_hotplug: yes

<7> [381.201024] i915 device info: has_hti: no

<7> [381.201028] i915 device info: has_ipc: yes

<7> [381.201033] i915 device info: has_overlay: no

<7> [381.201037] i915 device info: has_psr: yes

<7> [381.201041] i915 device info: has_psr_hw_tracking: yes

<7> [381.201046] i915 device info: overlay_needs_physical: no

<7> [381.201051] i915 device info: supports_tv: no

<7> [381.201055] i915 device info: has_hdcp: yes

<7> [381.201060] i915 device info: has_dmc: yes

<7> [381.201064] i915 device info: has_dsc: no

<7> [381.201068] i915 device info: rawclk rate: 266667 kHz

<7> [381.201074] i915 device info: iommu: enabled

<7> [381.201079] i915 device info: available engines: 40403

<7> [381.201084] i915 device info: slice total: 1, mask=0001

<7> [381.201090] i915 device info: subslice total: 2

<7> [381.201094] i915 device info: slice0: 2 subslices, mask=00000006

<7> [381.201100] i915 device info: EU total: 12

<7> [381.201104] i915 device info: EU per subslice: 6

<7> [381.201109] i915 device info: has slice power gating: no

<7> [381.201113] i915 device info: has subslice power gating: yes

<7> [381.201118] i915 device info: has EU power gating: yes

<6> [381.201124] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [381.201129] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [381.201134] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [381.201143] i915: Performing live selftests with st_random_seed=0x1bd26c4f st_timeout=500

<7> [381.201150] [drm:drm_client_modeset_probe]

<6> [381.201207] i915: Running i915_gem_object_live_selftests/igt_gem_huge

<7> [381.201239] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1]

<7> [381.201292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1]

<7> [381.201924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] disconnected

<7> [381.201984] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2]

<7> [381.202026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2]

<7> [381.202653] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] disconnected

<7> [381.202709] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [381.202721] [drm:drm_client_modeset_probe] connector 111 enabled? no

<7> [381.202729] [drm:drm_client_modeset_probe] connector 123 enabled? no

<7> [381.202816] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [381.202877] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [381.202922] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [381.202967] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [381.255565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-bc

<7> [381.256507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [381.257541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [381.258134] i915 0000:00:02.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5

<7> [381.258773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01

<7> [381.259873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [384.118958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [384.119651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [384.120412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00

<7> [384.121282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [384.122342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a

<7> [384.123049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc

<7> [384.144832] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [384.211394] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [384.313593] i915: probe of 0000:00:02.0 failed with error -25

Results for igt@i915_selftest@live@objects