igt@i915_module_load@reload on fi-kbl-guc@linus-v6.4-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gc43a17c70 (x86_64) (Linux: 6.4.0-rc2-linus-v6.4-rc2-gf1fcbaa18b28+ x86_64)
Out	Starting subtest: reload Subtest reload: SUCCESS (1.621s)
Err	Starting subtest: reload Subtest reload: SUCCESS (1.621s)
Dmesg	<6> [133.794460] [IGT] i915_module_load: executing <6> [133.796392] [IGT] i915_module_load: starting subtest reload <7> [133.936211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.943932] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.944776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [133.945113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.945348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.945566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [133.946029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.946591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [133.946799] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [133.947031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.947196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.947543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.947689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.947695] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.947813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [133.950773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.950778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [133.950900] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [133.950917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [133.951247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [133.951387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [133.951733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [133.951886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [133.951890] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.952060] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [133.953867] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [133.954083] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [133.954293] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [133.954530] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [133.954742] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [133.954952] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [133.955165] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [133.955375] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [133.955493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [133.955499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [133.955575] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [133.955687] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1 <7> [133.955709] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [133.955956] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1 <7> [133.956228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [133.956408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [133.956546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.956678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.957269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.107957] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [134.170817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.171589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [134.172664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.173936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [134.175108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [134.175988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [134.176818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [134.177721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [134.216732] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [134.284863] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <5> [135.209827] Setting dangerous option enable_guc - tainting kernel <7> [135.250889] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [135.251126] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [135.251286] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [135.251297] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [135.251517] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [135.251777] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [135.251930] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [135.252528] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [135.252668] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [135.252802] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [135.252934] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [135.252939] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [135.253411] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [135.253430] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [135.253582] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [135.253896] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018 <7> [135.254064] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [135.254203] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [135.254358] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [135.254509] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [135.260370] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [135.260527] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [135.260675] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [135.260821] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [135.260969] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [135.261109] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [135.261246] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [135.261394] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [135.261537] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [135.261666] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [135.261794] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [135.261922] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [135.262050] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [135.262177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [135.262726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [135.262882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [135.263038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [135.263191] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [135.263359] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [135.263522] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [135.263675] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [135.263827] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [135.263980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [135.264133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [135.264285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [135.264450] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [135.264611] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [135.264760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [135.264906] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [135.265058] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [135.265209] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [135.265369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [135.265528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [135.265677] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [135.265823] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [135.265970] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [135.266117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [135.266265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [135.266423] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [135.266593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.266779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [135.266945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [135.267095] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [135.267603] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [135.267756] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [135.267921] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.268116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.268264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.268424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.268593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [135.268776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [135.268924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [135.269072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [135.269219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [135.269419] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [135.270297] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [135.270775] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [135.271175] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [135.271381] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [135.271529] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [135.271670] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [135.271808] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [135.271958] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [135.272096] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [135.272237] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [135.272385] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [135.272538] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [135.274256] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [135.275813] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [135.276081] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present <7> [135.276312] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [135.276477] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [135.276615] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [135.276941] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default) <7> [135.277089] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [135.277225] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [135.277454] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [135.277641] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] using AUX A (VBT) <7> [135.277793] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E] <7> [135.278034] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [135.278421] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [135.278621] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [135.278790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [135.278938] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [135.279087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [135.279234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [135.279396] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [135.279573] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [135.279722] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [135.279870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [135.280017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [135.280164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [135.280311] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [135.280472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [135.280659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A <7> [135.280810] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [135.280964] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [135.281116] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [135.281266] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [135.281461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [135.281654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [135.281809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [135.281951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [135.282091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [135.282231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [135.282409] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [135.282587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [135.282734] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [135.282875] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [135.283015] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [135.283164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [135.283310] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [135.283487] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [135.283657] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [135.283829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [135.283980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [135.284127] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [135.284276] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [135.284435] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [135.284613] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [135.284754] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [135.287267] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [135.287435] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [135.287577] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [135.287723] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [135.287882] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [135.289050] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [135.289215] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [135.289382] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [135.292676] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [135.292877] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [135.321706] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [135.321887] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [135.322049] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [135.322198] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [135.322359] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [135.322507] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004 <7> [135.322655] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [135.322802] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [135.322951] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [135.323097] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [135.323243] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [135.323401] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [135.323549] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [135.323696] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [135.323843] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [135.324964] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [135.324968] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [135.331861] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [135.332298] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [135.332612] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [135.332616] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [135.332619] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [135.340971] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [135.341237] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [135.341397] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [135.341570] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [135.341709] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [135.341868] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [135.342370] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [135.342535] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [135.342669] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [135.342801] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [135.346076] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [135.346432] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [135.346756] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1 <7> [135.347621] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <6> [135.347671] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [135.349510] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [135.364143] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [135.365097] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21 <7> [135.365899] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [135.366485] [drm:drm_client_modeset_probe] <7> [135.366531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [135.366484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [135.366556] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [135.366726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [135.366913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [135.367081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [135.367765] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [135.367914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.368019] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [135.368023] i915 device info: graphics version: 9 <7> [135.368026] i915 device info: media version: 9 <7> [135.368028] i915 device info: display version: 9 <7> [135.368030] i915 device info: graphics stepping: F0 <7> [135.368032] i915 device info: media stepping: F0 <7> [135.368034] i915 device info: display stepping: C0 <7> [135.368036] i915 device info: base die stepping: ** <7> [135.368038] i915 device info: gt: 2 <7> [135.368040] i915 device info: memory-regions: 0x21 <7> [135.368042] i915 device info: page-sizes: 0x11000 <7> [135.368044] i915 device info: platform: KABYLAKE <7> [135.368046] i915 device info: ppgtt-size: 48 <7> [135.368048] i915 device info: ppgtt-type: 2 <7> [135.368050] i915 device info: dma_mask_size: 39 <7> [135.368052] i915 device info: is_mobile: no <7> [135.368054] i915 device info: is_lp: no <7> [135.368056] i915 device info: require_force_probe: no <7> [135.368058] i915 device info: is_dgfx: no <7> [135.368060] i915 device info: has_64bit_reloc: yes <7> [135.368062] i915 device info: has_64k_pages: no <7> [135.368064] i915 device info: gpu_reset_clobbers_display: no <7> [135.368066] i915 device info: has_reset_engine: yes <7> [135.368068] i915 device info: has_3d_pipeline: yes <7> [135.368070] i915 device info: has_4tile: no <7> [135.368072] i915 device info: has_flat_ccs: no <7> [135.368074] i915 device info: has_global_mocs: no <7> [135.368076] i915 device info: has_gmd_id: no <7> [135.368078] i915 device info: has_gt_uc: yes <7> [135.368080] i915 device info: has_heci_pxp: no <7> [135.368082] i915 device info: has_heci_gscfi: no <7> [135.368084] i915 device info: has_guc_deprivilege: no <7> [135.368086] i915 device info: has_l3_ccs_read: no <7> [135.368088] i915 device info: has_l3_dpf: no <7> [135.368090] i915 device info: has_llc: yes <7> [135.368092] i915 device info: has_logical_ring_contexts: yes <7> [135.368094] i915 device info: has_logical_ring_elsq: no <7> [135.368096] i915 device info: has_media_ratio_mode: no <7> [135.368098] i915 device info: has_mslice_steering: no <7> [135.368100] i915 device info: has_oa_bpc_reporting: no <7> [135.368102] i915 device info: has_oa_slice_contrib_limits: no <7> [135.368104] i915 device info: has_oam: no <7> [135.368106] i915 device info: has_one_eu_per_fuse_bit: no <7> [135.368107] i915 device info: has_pxp: no <7> [135.368109] i915 device info: has_rc6: yes <7> [135.368111] i915 device info: has_rc6p: no <7> [135.368113] i915 device info: has_rps: yes <7> [135.368135] i915 device info: has_runtime_pm: yes <7> [135.368138] i915 device info: has_snoop: no <7> [135.368140] i915 device info: has_coherent_ggtt: yes <7> [135.368143] i915 device info: tuning_thread_rr_after_dep: no <7> [135.368145] i915 device info: unfenced_needs_alignment: no <7> [135.368147] i915 device info: hws_needs_physical: no <7> [135.368150] i915 device info: has_pooled_eu: no <7> [135.368152] i915 device info: cursor_needs_physical: no <7> [135.368154] i915 device info: has_cdclk_crawl: no <7> [135.368157] i915 device info: has_cdclk_squash: no <7> [135.368159] i915 device info: has_ddi: yes <7> [135.368161] i915 device info: has_dp_mst: yes <7> [135.368164] i915 device info: has_dsb: no <7> [135.368166] i915 device info: has_fpga_dbg: yes <7> [135.368168] i915 device info: has_gmch: no <7> [135.368170] i915 device info: has_hotplug: yes <7> [135.368173] i915 device info: has_hti: no <7> [135.368175] i915 device info: has_ipc: yes <7> [135.368177] i915 device info: has_overlay: no <7> [135.368180] i915 device info: has_psr: yes <7> [135.368182] i915 device info: has_psr_hw_tracking: yes <7> [135.368184] i915 device info: overlay_needs_physical: no <7> [135.368187] i915 device info: supports_tv: no <7> [135.368189] i915 device info: has_hdcp: yes <7> [135.368191] i915 device info: has_dmc: yes <7> [135.368194] i915 device info: has_dsc: no <7> [135.368196] i915 device info: rawclk rate: 24000 kHz <7> [135.368199] i915 device info: iommu: enabled <7> [135.368201] i915 device info: available engines: 40403 <7> [135.368204] i915 device info: slice total: 1, mask=0001 <7> [135.368207] i915 device info: subslice total: 3 <7> [135.368209] i915 device info: slice0: 3 subslices, mask=00000007 <7> [135.368212] i915 device info: slice1: 0 subslices, mask=00000000 <7> [135.368215] i915 device info: slice2: 0 subslices, mask=00000000 <7> [135.368218] i915 device info: EU total: 24 <7> [135.368220] i915 device info: EU per subslice: 8 <7> [135.368222] i915 device info: has slice power gating: no <7> [135.368225] i915 device info: has subslice power gating: no <7> [135.368227] i915 device info: has EU power gating: yes <6> [135.368230] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <7> [135.368136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <6> [135.368233] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [135.368235] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [135.368716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.368939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.368946] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.369143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [135.372251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.372260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [135.372525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [135.372914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [135.373103] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.373255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.373853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.374128] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [135.374151] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [135.374221] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [135.374234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [135.374446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.375549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [135.375709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [135.376041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [135.376494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [135.376499] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.376661] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [135.391316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [135.391324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [135.391505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.391673] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [135.391695] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [135.391713] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [135.391725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [135.391881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.392434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.392623] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [135.392642] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [135.392658] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [135.392663] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [135.392666] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [135.392668] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [135.392698] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [135.392706] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [135.392722] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [135.392736] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [135.393127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.393288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.393782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.394433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [135.394625] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.394777] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.395376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.395658] [drm:drm_client_modeset_probe] <7> [135.395696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [135.395712] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [135.395924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.397103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.397249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [135.397600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.398043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.398048] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.398197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [135.403612] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [135.404267] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [135.404773] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [135.405807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.406596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.408359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.408369] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [135.408519] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [135.408537] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [135.408549] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [135.408886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [135.409003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [135.409300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [135.409459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [135.409465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.409634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [135.413244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [135.413251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [135.413411] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [135.413433] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [135.413452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [135.413881] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [135.413895] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [135.413899] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [135.413902] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [135.413905] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [135.413938] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [135.413946] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [135.413965] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [135.413979] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [135.414033] [drm:drm_client_modeset_probe] <7> [135.414200] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <6> [135.414211] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [135.414220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [135.414634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.414669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [135.414753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [135.415062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.415252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.415188] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [135.415259] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.415439] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <6> [135.417756] [IGT] i915_module_load: exiting, ret=0 <7> [135.418501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.418507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [135.418651] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [135.418667] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [135.418679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [135.419011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [135.419146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [135.419519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [135.419688] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [135.419694] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.419863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [135.422846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [135.422852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [135.422992] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [135.423008] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [135.423020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [135.423174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [135.423193] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [135.423198] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [135.423203] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [135.423207] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [135.423227] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [135.423241] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [135.423268] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [135.423289] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [133.794460] [IGT] i915_module_load: executing

<6> [133.796392] [IGT] i915_module_load: starting subtest reload

<7> [133.936211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.943932] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.944776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [133.945113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.945348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.945566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [133.946029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.946591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [133.946799] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [133.947031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.947196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.947543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.947689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.947695] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.947813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [133.950773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.950778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [133.950900] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [133.950917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [133.951247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [133.951387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [133.951733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [133.951886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [133.951890] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.952060] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [133.953867] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [133.954083] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [133.954293] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [133.954530] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [133.954742] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [133.954952] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [133.955165] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [133.955375] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [133.955493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [133.955499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [133.955575] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [133.955687] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1

<7> [133.955709] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [133.955956] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1

<7> [133.956228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [133.956408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [133.956546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.956678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.957269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.107957] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [134.170817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.171589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [134.172664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.173936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [134.175108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [134.175988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [134.176818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [134.177721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [134.216732] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [134.284863] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<5> [135.209827] Setting dangerous option enable_guc - tainting kernel

<7> [135.250889] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [135.251126] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [135.251286] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [135.251297] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [135.251517] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [135.251777] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [135.251930] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [135.252528] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [135.252668] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [135.252802] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [135.252934] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [135.252939] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [135.253411] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [135.253430] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [135.253582] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [135.253896] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018

<7> [135.254064] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [135.254203] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [135.254358] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [135.254509] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [135.260370] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [135.260527] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [135.260675] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [135.260821] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [135.260969] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [135.261109] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [135.261246] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [135.261394] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [135.261537] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [135.261666] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [135.261794] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [135.261922] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [135.262050] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [135.262177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [135.262726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [135.262882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [135.263038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [135.263191] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [135.263359] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [135.263522] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [135.263675] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [135.263827] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [135.263980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [135.264133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [135.264285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [135.264450] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [135.264611] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [135.264760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [135.264906] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [135.265058] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [135.265209] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [135.265369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [135.265528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [135.265677] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [135.265823] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [135.265970] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [135.266117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [135.266265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [135.266423] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [135.266593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.266779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [135.266945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [135.267095] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [135.267603] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [135.267756] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [135.267921] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.268116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.268264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.268424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.268593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [135.268776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [135.268924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [135.269072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [135.269219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [135.269419] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [135.270297] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [135.270775] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [135.271175] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [135.271381] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [135.271529] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [135.271670] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [135.271808] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [135.271958] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [135.272096] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [135.272237] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [135.272385] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [135.272538] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [135.274256] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [135.275813] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [135.276081] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present

<7> [135.276312] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [135.276477] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [135.276615] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [135.276941] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default)

<7> [135.277089] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [135.277225] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [135.277454] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [135.277641] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI E/PHY E] using AUX A (VBT)

<7> [135.277793] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]

<7> [135.278034] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [135.278421] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [135.278621] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [135.278790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [135.278938] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [135.279087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [135.279234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [135.279396] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [135.279573] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [135.279722] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [135.279870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [135.280017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [135.280164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [135.280311] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [135.280472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [135.280659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [135.280810] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [135.280964] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [135.281116] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [135.281266] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [135.281461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [135.281654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [135.281809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [135.281951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [135.282091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [135.282231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [135.282409] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [135.282587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [135.282734] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [135.282875] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [135.283015] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [135.283164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [135.283310] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [135.283487] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [135.283657] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [135.283829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [135.283980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [135.284127] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [135.284276] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [135.284435] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [135.284613] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [135.284754] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [135.287267] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [135.287435] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [135.287577] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [135.287723] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [135.287882] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [135.289050] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [135.289215] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [135.289382] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [135.292676] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [135.292877] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [135.321706] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [135.321887] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [135.322049] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [135.322198] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [135.322359] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [135.322507] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004

<7> [135.322655] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [135.322802] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [135.322951] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [135.323097] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [135.323243] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [135.323401] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [135.323549] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [135.323696] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [135.323843] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [135.324964] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [135.324968] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [135.331861] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [135.332298] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [135.332612] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [135.332616] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [135.332619] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [135.340971] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [135.341237] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [135.341397] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [135.341570] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [135.341709] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [135.341868] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [135.342370] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [135.342535] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [135.342669] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [135.342801] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [135.346076] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [135.346432] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [135.346756] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1

<7> [135.347621] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<6> [135.347671] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [135.349510] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [135.364143] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [135.365097] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21

<7> [135.365899] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [135.366485] [drm:drm_client_modeset_probe]

<7> [135.366531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [135.366484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [135.366556] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [135.366726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [135.366913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [135.367081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [135.367765] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [135.367914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.368019] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [135.368023] i915 device info: graphics version: 9

<7> [135.368026] i915 device info: media version: 9

<7> [135.368028] i915 device info: display version: 9

<7> [135.368030] i915 device info: graphics stepping: F0

<7> [135.368032] i915 device info: media stepping: F0

<7> [135.368034] i915 device info: display stepping: C0

<7> [135.368036] i915 device info: base die stepping: **

<7> [135.368038] i915 device info: gt: 2

<7> [135.368040] i915 device info: memory-regions: 0x21

<7> [135.368042] i915 device info: page-sizes: 0x11000

<7> [135.368044] i915 device info: platform: KABYLAKE

<7> [135.368046] i915 device info: ppgtt-size: 48

<7> [135.368048] i915 device info: ppgtt-type: 2

<7> [135.368050] i915 device info: dma_mask_size: 39

<7> [135.368052] i915 device info: is_mobile: no

<7> [135.368054] i915 device info: is_lp: no

<7> [135.368056] i915 device info: require_force_probe: no

<7> [135.368058] i915 device info: is_dgfx: no

<7> [135.368060] i915 device info: has_64bit_reloc: yes

<7> [135.368062] i915 device info: has_64k_pages: no

<7> [135.368064] i915 device info: gpu_reset_clobbers_display: no

<7> [135.368066] i915 device info: has_reset_engine: yes

<7> [135.368068] i915 device info: has_3d_pipeline: yes

<7> [135.368070] i915 device info: has_4tile: no

<7> [135.368072] i915 device info: has_flat_ccs: no

<7> [135.368074] i915 device info: has_global_mocs: no

<7> [135.368076] i915 device info: has_gmd_id: no

<7> [135.368078] i915 device info: has_gt_uc: yes

<7> [135.368080] i915 device info: has_heci_pxp: no

<7> [135.368082] i915 device info: has_heci_gscfi: no

<7> [135.368084] i915 device info: has_guc_deprivilege: no

<7> [135.368086] i915 device info: has_l3_ccs_read: no

<7> [135.368088] i915 device info: has_l3_dpf: no

<7> [135.368090] i915 device info: has_llc: yes

<7> [135.368092] i915 device info: has_logical_ring_contexts: yes

<7> [135.368094] i915 device info: has_logical_ring_elsq: no

<7> [135.368096] i915 device info: has_media_ratio_mode: no

<7> [135.368098] i915 device info: has_mslice_steering: no

<7> [135.368100] i915 device info: has_oa_bpc_reporting: no

<7> [135.368102] i915 device info: has_oa_slice_contrib_limits: no

<7> [135.368104] i915 device info: has_oam: no

<7> [135.368106] i915 device info: has_one_eu_per_fuse_bit: no

<7> [135.368107] i915 device info: has_pxp: no

<7> [135.368109] i915 device info: has_rc6: yes

<7> [135.368111] i915 device info: has_rc6p: no

<7> [135.368113] i915 device info: has_rps: yes

<7> [135.368135] i915 device info: has_runtime_pm: yes

<7> [135.368138] i915 device info: has_snoop: no

<7> [135.368140] i915 device info: has_coherent_ggtt: yes

<7> [135.368143] i915 device info: tuning_thread_rr_after_dep: no

<7> [135.368145] i915 device info: unfenced_needs_alignment: no

<7> [135.368147] i915 device info: hws_needs_physical: no

<7> [135.368150] i915 device info: has_pooled_eu: no

<7> [135.368152] i915 device info: cursor_needs_physical: no

<7> [135.368154] i915 device info: has_cdclk_crawl: no

<7> [135.368157] i915 device info: has_cdclk_squash: no

<7> [135.368159] i915 device info: has_ddi: yes

<7> [135.368161] i915 device info: has_dp_mst: yes

<7> [135.368164] i915 device info: has_dsb: no

<7> [135.368166] i915 device info: has_fpga_dbg: yes

<7> [135.368168] i915 device info: has_gmch: no

<7> [135.368170] i915 device info: has_hotplug: yes

<7> [135.368173] i915 device info: has_hti: no

<7> [135.368175] i915 device info: has_ipc: yes

<7> [135.368177] i915 device info: has_overlay: no

<7> [135.368180] i915 device info: has_psr: yes

<7> [135.368182] i915 device info: has_psr_hw_tracking: yes

<7> [135.368184] i915 device info: overlay_needs_physical: no

<7> [135.368187] i915 device info: supports_tv: no

<7> [135.368189] i915 device info: has_hdcp: yes

<7> [135.368191] i915 device info: has_dmc: yes

<7> [135.368194] i915 device info: has_dsc: no

<7> [135.368196] i915 device info: rawclk rate: 24000 kHz

<7> [135.368199] i915 device info: iommu: enabled

<7> [135.368201] i915 device info: available engines: 40403

<7> [135.368204] i915 device info: slice total: 1, mask=0001

<7> [135.368207] i915 device info: subslice total: 3

<7> [135.368209] i915 device info: slice0: 3 subslices, mask=00000007

<7> [135.368212] i915 device info: slice1: 0 subslices, mask=00000000

<7> [135.368215] i915 device info: slice2: 0 subslices, mask=00000000

<7> [135.368218] i915 device info: EU total: 24

<7> [135.368220] i915 device info: EU per subslice: 8

<7> [135.368222] i915 device info: has slice power gating: no

<7> [135.368225] i915 device info: has subslice power gating: no

<7> [135.368227] i915 device info: has EU power gating: yes

<6> [135.368230] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<7> [135.368136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<6> [135.368233] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [135.368235] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [135.368716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.368939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.368946] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.369143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [135.372251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.372260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [135.372525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [135.372914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [135.373103] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.373255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.373853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.374128] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [135.374151] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [135.374221] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [135.374234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [135.374446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.375549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [135.375709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [135.376041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [135.376494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [135.376499] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.376661] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [135.391316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [135.391324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [135.391505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.391673] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [135.391695] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [135.391713] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [135.391725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [135.391881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.392434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.392623] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [135.392642] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [135.392658] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [135.392663] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [135.392666] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [135.392668] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [135.392698] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [135.392706] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [135.392722] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [135.392736] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [135.393127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.393288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.393782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.394433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [135.394625] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.394777] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.395376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.395658] [drm:drm_client_modeset_probe]

<7> [135.395696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [135.395712] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [135.395924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.397103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.397249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [135.397600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.398043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.398048] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.398197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [135.403612] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [135.404267] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [135.404773] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [135.405807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.406596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.408359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.408369] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [135.408519] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [135.408537] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [135.408549] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [135.408886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [135.409003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [135.409300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [135.409459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [135.409465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.409634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [135.413244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [135.413251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [135.413411] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [135.413433] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [135.413452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [135.413881] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [135.413895] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [135.413899] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [135.413902] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [135.413905] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [135.413938] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [135.413946] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [135.413965] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [135.413979] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [135.414033] [drm:drm_client_modeset_probe]

<7> [135.414200] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<6> [135.414211] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [135.414220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [135.414634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.414669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [135.414753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [135.415062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.415252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.415188] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [135.415259] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.415439] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<6> [135.417756] [IGT] i915_module_load: exiting, ret=0

<7> [135.418501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.418507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [135.418651] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [135.418667] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [135.418679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [135.419011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [135.419146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [135.419519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [135.419688] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [135.419694] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.419863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [135.422846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [135.422852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [135.422992] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [135.423008] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [135.423020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [135.423174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [135.423193] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [135.423198] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [135.423203] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [135.423207] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [135.423227] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [135.423241] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [135.423268] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [135.423289] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

Results for igt@i915_module_load@reload