igt@i915_selftest@live@slpc on fi-apl-guc@linus-v6.4-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gc43a17c70 (x86_64) (Linux: 6.4.0-rc2-linus-v6.4-rc2-gf1fcbaa18b28+ x86_64)
Out	Starting dynamic subtest: slpc Dynamic subtest slpc: SUCCESS (1.475s)
Err	Starting dynamic subtest: slpc Dynamic subtest slpc: SUCCESS (1.475s)
Dmesg	<6> [491.695235] [IGT] i915_selftest: starting dynamic subtest slpc <5> [491.984131] Setting dangerous option enable_guc - tainting kernel <5> [491.984148] Setting dangerous option enable_guc - tainting kernel <5> [491.984160] Setting dangerous option live_selftests - tainting kernel <7> [492.106347] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [492.107150] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [492.107803] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [492.107855] i915 0000:00:02.0: [drm:intel_detect_pch [i915]] No PCH found. <7> [492.108433] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [492.109360] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [492.110944] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 266667 kHz <7> [492.112207] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [492.112837] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [492.113330] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [492.113907] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [492.113923] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [492.114889] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [492.114985] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [492.115601] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [492.116838] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79871018 <7> [492.117542] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [492.118055] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [492.118620] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [492.119209] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [492.119780] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH1 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3 <7> [492.120217] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH2 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3 <7> [492.120728] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [492.121172] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [492.122550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz <7> [492.123111] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT BROXTON ", BDB version 207 <7> [492.123792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [492.124349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [492.124958] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [492.125540] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [492.126085] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [492.126707] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [492.127254] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [492.127814] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [492.128350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [492.128968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [492.129558] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [492.130058] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [492.130565] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [492.131049] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [492.131633] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [492.132169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [492.132764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0 <7> [492.133353] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [492.134044] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [492.134703] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0 <7> [492.135266] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 09 <7> [492.135899] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [492.136664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [492.137291] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6 <7> [492.137988] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [492.138791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [492.139373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [492.140087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [492.140712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [492.141401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a <7> [492.142113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 1 already enabled, won't reprogram it <7> [492.142707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc <7> [492.143294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 0 already enabled, won't reprogram it <7> [492.143960] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/bxt_dmc_ver1_07.bin <6> [492.146878] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7) <6> [492.147391] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <7> [492.147402] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <7> [492.148615] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 0 us <7> [492.149299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7> [492.149967] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7 (7.0 usec) <7> [492.150606] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8 (8.0 usec) <7> [492.151129] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec) <7> [492.151615] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22 (22.0 usec) <7> [492.152114] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22 (22.0 usec) <7> [492.152632] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22 (22.0 usec) <7> [492.153129] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22 (22.0 usec) <7> [492.158284] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [492.162032] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6 <7> [492.162704] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000 kHz <7> [492.163271] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 624000 kHz <7> [492.163947] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present <7> [492.164536] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon <7> [492.165161] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI B/PHY B] using AUX B (VBT) <7> [492.165835] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:110:DDI B/PHY B] <7> [492.167186] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [492.167910] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:122:DDI C/PHY C] using AUX C (VBT) <7> [492.168545] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:122:DDI C/PHY C] <7> [492.169637] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [492.170161] i915 0000:00:02.0: [drm:vlv_dsi_init [i915]] <7> [492.171640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled <7> [492.172324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe B] hw state readout: disabled <7> [492.173082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled <7> [492.173764] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [492.174309] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [492.174944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] hw state readout: disabled, pipe A <7> [492.175538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] hw state readout: disabled, pipe A <7> [492.176081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B <7> [492.176710] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [492.177258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] hw state readout: disabled, pipe B <7> [492.177918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] hw state readout: disabled, pipe B <7> [492.178520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] hw state readout: disabled, pipe C <7> [492.179064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] hw state readout: disabled, pipe C <7> [492.179663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] hw state readout: disabled, pipe C <7> [492.180275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI B/PHY B] hw state readout: disabled, pipe A <7> [492.180828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST A] hw state readout: disabled, pipe A <7> [492.181389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DP-MST B] hw state readout: disabled, pipe B <7> [492.182028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:114:DP-MST C] hw state readout: disabled, pipe C <7> [492.182672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DDI C/PHY C] hw state readout: disabled, pipe A <7> [492.183175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:124:DP-MST A] hw state readout: disabled, pipe A <7> [492.183678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:125:DP-MST B] hw state readout: disabled, pipe B <7> [492.184234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:126:DP-MST C] hw state readout: disabled, pipe C <7> [492.184886] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL A hw state readout: pipe_mask 0x0, on 0 <7> [492.185551] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL B hw state readout: pipe_mask 0x0, on 0 <7> [492.186155] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL C hw state readout: pipe_mask 0x0, on 0 <7> [492.186841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:DP-1] hw state readout: disabled <7> [492.187524] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:DP-2] hw state readout: disabled <7> [492.188087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [492.188689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [492.189269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] min_cdclk 0 kHz <7> [492.189940] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] min_cdclk 0 kHz <7> [492.190563] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [492.191138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz <7> [492.191782] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [492.192337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] min_cdclk 0 kHz <7> [492.192990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] min_cdclk 0 kHz <7> [492.193593] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [492.194109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] min_cdclk 0 kHz <7> [492.194636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] min_cdclk 0 kHz <7> [492.195193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] min_cdclk 0 kHz <7> [492.195825] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [492.196552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state] <7> [492.197121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe B] enable: no [setup_hw_state] <7> [492.197698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state] <7> [492.198219] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [492.198761] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:88:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [492.199248] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [492.206532] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [176K, 824K) <7> [492.207100] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [492.207691] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [492.208235] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:1 = 1000000 <7> [492.208795] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 3 GT workarounds on global <7> [492.211592] i915 0000:00:02.0: [drm:intel_rc6_init [i915]] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 0 <7> [492.213702] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 9 engine workarounds on rcs'0 <7> [492.214278] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [492.214959] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0 <7> [492.229552] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [492.230203] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [492.306015] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd204f <7> [492.306611] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [492.307114] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [492.307668] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [492.308265] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a6 <7> [492.308908] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x5a85000b <7> [492.309464] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [492.310093] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [492.310676] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [492.311265] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [492.311894] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [492.312507] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [492.313080] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [492.313688] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [492.314231] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [492.317864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/bxt_guc_70.1.1.bin version 70.1.1 <6> [492.317883] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/bxt_huc_2.0.0.bin version 2.0.0 <7> [492.334716] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 100MHz, before = 100MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [492.337431] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [492.338458] i915 0000:00:02.0: [drm] GT0: HuC: authenticated! <6> [492.338511] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [492.338519] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [492.370167] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:59:pipe A] not active, skipping <7> [492.370824] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:88:pipe B] not active, skipping <7> [492.371359] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:109:pipe C] not active, skipping <7> [492.371905] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [492.372569] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [492.374409] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [492.374964] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [492.375406] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [492.375957] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [492.383518] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [492.388863] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2 <7> [492.390466] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.391992] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.393826] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.395319] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.397051] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.398012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [492.398877] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.400530] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.404015] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.406530] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.408715] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.411936] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.412853] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0) <7> [492.412889] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected <7> [492.414155] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.415873] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.417264] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.418970] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.420879] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.422344] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.424413] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.427504] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.429086] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer <7> [492.430083] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON <7> [492.431555] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04 <7> [492.432555] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000 <7> [492.432601] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips <7> [492.433156] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init <7> [492.434598] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR <7> [492.435173] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:DP-1] generating connector hotplug event <7> [492.436536] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [492.439681] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:DP-2] generating connector hotplug event <6> [492.439834] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [492.445758] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 2 outputs detected <6> [492.474005] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [492.479800] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input71 <7> [492.481508] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [492.486513] [drm:drm_client_modeset_probe] <7> [492.486611] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] <7> [492.486532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-a <7> [492.486664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1] <7> [492.487219] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] status updated from unknown to disconnected <7> [492.487278] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] disconnected <7> [492.487326] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] <7> [492.487370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2] <7> [492.488458] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] status updated from unknown to disconnected <7> [492.488867] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] disconnected <7> [492.488913] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [492.488925] [drm:drm_client_modeset_probe] connector 111 enabled? no <7> [492.488933] [drm:drm_client_modeset_probe] connector 123 enabled? no <7> [492.489017] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [492.489041] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [492.489084] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [492.489128] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [492.489723] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [492.490315] i915 device info: pciid=0x5a85 rev=0x0b platform=BROXTON (subplatform=0x0) gen=9 <7> [492.490327] i915 device info: graphics version: 9 <7> [492.490332] i915 device info: media version: 9 <7> [492.490337] i915 device info: display version: 9 <7> [492.490342] i915 device info: graphics stepping: C0 <7> [492.490346] i915 device info: media stepping: C0 <7> [492.490351] i915 device info: display stepping: C0 <7> [492.490355] i915 device info: base die stepping: ** <7> [492.490360] i915 device info: gt: 0 <7> [492.490365] i915 device info: memory-regions: 0x21 <7> [492.490369] i915 device info: page-sizes: 0x11000 <7> [492.490374] i915 device info: platform: BROXTON <7> [492.490379] i915 device info: ppgtt-size: 48 <7> [492.490384] i915 device info: ppgtt-type: 2 <7> [492.490389] i915 device info: dma_mask_size: 39 <7> [492.490394] i915 device info: is_mobile: no <7> [492.490398] i915 device info: is_lp: yes <7> [492.490403] i915 device info: require_force_probe: no <7> [492.490408] i915 device info: is_dgfx: no <7> [492.490412] i915 device info: has_64bit_reloc: yes <7> [492.490417] i915 device info: has_64k_pages: no <7> [492.490421] i915 device info: gpu_reset_clobbers_display: no <7> [492.490426] i915 device info: has_reset_engine: yes <7> [492.490430] i915 device info: has_3d_pipeline: yes <7> [492.490435] i915 device info: has_4tile: no <7> [492.490440] i915 device info: has_flat_ccs: no <7> [492.490444] i915 device info: has_global_mocs: no <7> [492.490448] i915 device info: has_gmd_id: no <7> [492.490453] i915 device info: has_gt_uc: yes <7> [492.490458] i915 device info: has_heci_pxp: no <7> [492.490462] i915 device info: has_heci_gscfi: no <7> [492.490467] i915 device info: has_guc_deprivilege: no <7> [492.490508] i915 device info: has_l3_ccs_read: no <7> [492.490515] i915 device info: has_l3_dpf: no <7> [492.490519] i915 device info: has_llc: no <7> [492.490524] i915 device info: has_logical_ring_contexts: yes <7> [492.490528] i915 device info: has_logical_ring_elsq: no <7> [492.490534] i915 device info: has_media_ratio_mode: no <7> [492.490538] i915 device info: has_mslice_steering: no <7> [492.490543] i915 device info: has_oa_bpc_reporting: no <7> [492.490549] i915 device info: has_oa_slice_contrib_limits: no <7> [492.490554] i915 device info: has_oam: no <7> [492.490559] i915 device info: has_one_eu_per_fuse_bit: no <7> [492.490564] i915 device info: has_pxp: no <7> [492.490569] i915 device info: has_rc6: yes <7> [492.490574] i915 device info: has_rc6p: no <7> [492.490579] i915 device info: has_rps: yes <7> [492.490584] i915 device info: has_runtime_pm: yes <7> [492.490589] i915 device info: has_snoop: yes <7> [492.490594] i915 device info: has_coherent_ggtt: no <7> [492.490600] i915 device info: tuning_thread_rr_after_dep: no <7> [492.490605] i915 device info: unfenced_needs_alignment: no <7> [492.490610] i915 device info: hws_needs_physical: no <7> [492.490615] i915 device info: has_pooled_eu: no <7> [492.490620] i915 device info: cursor_needs_physical: no <7> [492.490625] i915 device info: has_cdclk_crawl: no <7> [492.490630] i915 device info: has_cdclk_squash: no <7> [492.490635] i915 device info: has_ddi: yes <7> [492.490640] i915 device info: has_dp_mst: yes <7> [492.490645] i915 device info: has_dsb: no <7> [492.490650] i915 device info: has_fpga_dbg: yes <7> [492.490656] i915 device info: has_gmch: no <7> [492.490661] i915 device info: has_hotplug: yes <7> [492.490666] i915 device info: has_hti: no <7> [492.490671] i915 device info: has_ipc: yes <7> [492.490676] i915 device info: has_overlay: no <7> [492.490681] i915 device info: has_psr: yes <7> [492.490686] i915 device info: has_psr_hw_tracking: yes <7> [492.490692] i915 device info: overlay_needs_physical: no <7> [492.490697] i915 device info: supports_tv: no <7> [492.490702] i915 device info: has_hdcp: yes <7> [492.490707] i915 device info: has_dmc: yes <7> [492.490712] i915 device info: has_dsc: no <7> [492.490717] i915 device info: rawclk rate: 266667 kHz <7> [492.490723] i915 device info: iommu: enabled <7> [492.490729] i915 device info: available engines: 40403 <7> [492.490735] i915 device info: slice total: 1, mask=0001 <7> [492.490742] i915 device info: subslice total: 2 <7> [492.490747] i915 device info: slice0: 2 subslices, mask=00000006 <7> [492.490753] i915 device info: EU total: 12 <7> [492.490757] i915 device info: EU per subslice: 6 <7> [492.490762] i915 device info: has slice power gating: no <7> [492.490767] i915 device info: has subslice power gating: yes <7> [492.490771] i915 device info: has EU power gating: yes <6> [492.490778] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [492.490783] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [492.490788] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [492.491222] [drm:drm_client_modeset_probe] <7> [492.491310] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] <7> [492.491364] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1] <6> [492.491680] i915: Performing live selftests with st_random_seed=0x49c745a4 st_timeout=500 <6> [492.491694] i915: Running slpc <6> [492.491753] i915: Running intel_slpc_live_selftests/live_slpc_vary_max <6> [492.491791] i915: Running intel_slpc_live_selftests/live_slpc_vary_min <6> [492.491819] i915: Running intel_slpc_live_selftests/live_slpc_max_granted <6> [492.491847] i915: Running intel_slpc_live_selftests/live_slpc_power <6> [492.491874] i915: Running intel_slpc_live_selftests/live_slpc_tile_interaction <7> [492.492390] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] disconnected <7> [492.492449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] <7> [492.492297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a <7> [492.492512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2] <7> [492.493058] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] disconnected <7> [492.493108] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [492.493120] [drm:drm_client_modeset_probe] connector 111 enabled? no <7> [492.493129] [drm:drm_client_modeset_probe] connector 123 enabled? no <7> [492.493251] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [492.493277] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [492.493326] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [492.493370] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [492.521288] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [492.591373] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [492.706408] i915: probe of 0000:00:02.0 failed with error -25

<6> [491.695235] [IGT] i915_selftest: starting dynamic subtest slpc

<5> [491.984131] Setting dangerous option enable_guc - tainting kernel

<5> [491.984148] Setting dangerous option enable_guc - tainting kernel

<5> [491.984160] Setting dangerous option live_selftests - tainting kernel

<7> [492.106347] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [492.107150] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [492.107803] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [492.107855] i915 0000:00:02.0: [drm:intel_detect_pch [i915]] No PCH found.

<7> [492.108433] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [492.109360] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [492.110944] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 266667 kHz

<7> [492.112207] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [492.112837] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [492.113330] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [492.113907] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [492.113923] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [492.114889] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [492.114985] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [492.115601] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [492.116838] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79871018

<7> [492.117542] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [492.118055] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [492.118620] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [492.119209] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [492.119780] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH1 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3

<7> [492.120217] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH2 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3

<7> [492.120728] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [492.121172] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [492.122550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz

<7> [492.123111] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT BROXTON ", BDB version 207

<7> [492.123792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [492.124349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [492.124958] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [492.125540] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [492.126085] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [492.126707] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [492.127254] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [492.127814] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [492.128350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [492.128968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [492.129558] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [492.130058] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [492.130565] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [492.131049] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [492.131633] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [492.132169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [492.132764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0

<7> [492.133353] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [492.134044] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [492.134703] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0

<7> [492.135266] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 09

<7> [492.135899] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [492.136664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [492.137291] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6

<7> [492.137988] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [492.138791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [492.139373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [492.140087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [492.140712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [492.141401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a

<7> [492.142113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 1 already enabled, won't reprogram it

<7> [492.142707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc

<7> [492.143294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 0 already enabled, won't reprogram it

<7> [492.143960] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/bxt_dmc_ver1_07.bin

<6> [492.146878] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)

<6> [492.147391] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<7> [492.147402] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<7> [492.148615] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 0 us

<7> [492.149299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)

<7> [492.149967] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7 (7.0 usec)

<7> [492.150606] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8 (8.0 usec)

<7> [492.151129] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec)

<7> [492.151615] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22 (22.0 usec)

<7> [492.152114] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22 (22.0 usec)

<7> [492.152632] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22 (22.0 usec)

<7> [492.153129] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22 (22.0 usec)

<7> [492.158284] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [492.162032] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6

<7> [492.162704] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000 kHz

<7> [492.163271] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 624000 kHz

<7> [492.163947] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present

<7> [492.164536] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon

<7> [492.165161] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI B/PHY B] using AUX B (VBT)

<7> [492.165835] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:110:DDI B/PHY B]

<7> [492.167186] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [492.167910] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:122:DDI C/PHY C] using AUX C (VBT)

<7> [492.168545] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:122:DDI C/PHY C]

<7> [492.169637] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [492.170161] i915 0000:00:02.0: [drm:vlv_dsi_init [i915]]

<7> [492.171640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled

<7> [492.172324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe B] hw state readout: disabled

<7> [492.173082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled

<7> [492.173764] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [492.174309] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [492.174944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] hw state readout: disabled, pipe A

<7> [492.175538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] hw state readout: disabled, pipe A

<7> [492.176081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B

<7> [492.176710] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [492.177258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] hw state readout: disabled, pipe B

<7> [492.177918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] hw state readout: disabled, pipe B

<7> [492.178520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] hw state readout: disabled, pipe C

<7> [492.179064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] hw state readout: disabled, pipe C

<7> [492.179663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] hw state readout: disabled, pipe C

<7> [492.180275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [492.180828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST A] hw state readout: disabled, pipe A

<7> [492.181389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DP-MST B] hw state readout: disabled, pipe B

<7> [492.182028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:114:DP-MST C] hw state readout: disabled, pipe C

<7> [492.182672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [492.183175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:124:DP-MST A] hw state readout: disabled, pipe A

<7> [492.183678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:125:DP-MST B] hw state readout: disabled, pipe B

<7> [492.184234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:126:DP-MST C] hw state readout: disabled, pipe C

<7> [492.184886] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL A hw state readout: pipe_mask 0x0, on 0

<7> [492.185551] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL B hw state readout: pipe_mask 0x0, on 0

<7> [492.186155] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL C hw state readout: pipe_mask 0x0, on 0

<7> [492.186841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:DP-1] hw state readout: disabled

<7> [492.187524] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:DP-2] hw state readout: disabled

<7> [492.188087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [492.188689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [492.189269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] min_cdclk 0 kHz

<7> [492.189940] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] min_cdclk 0 kHz

<7> [492.190563] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [492.191138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz

<7> [492.191782] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [492.192337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] min_cdclk 0 kHz

<7> [492.192990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] min_cdclk 0 kHz

<7> [492.193593] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [492.194109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] min_cdclk 0 kHz

<7> [492.194636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] min_cdclk 0 kHz

<7> [492.195193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] min_cdclk 0 kHz

<7> [492.195825] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [492.196552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]

<7> [492.197121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe B] enable: no [setup_hw_state]

<7> [492.197698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]

<7> [492.198219] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [492.198761] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:88:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [492.199248] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [492.206532] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [176K, 824K)

<7> [492.207100] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [492.207691] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [492.208235] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:1 = 1000000

<7> [492.208795] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 3 GT workarounds on global

<7> [492.211592] i915 0000:00:02.0: [drm:intel_rc6_init [i915]] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 0

<7> [492.213702] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 9 engine workarounds on rcs'0

<7> [492.214278] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [492.214959] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0

<7> [492.229552] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [492.230203] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [492.306015] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd204f

<7> [492.306611] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [492.307114] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [492.307668] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [492.308265] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a6

<7> [492.308908] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x5a85000b

<7> [492.309464] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [492.310093] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [492.310676] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [492.311265] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [492.311894] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [492.312507] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [492.313080] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [492.313688] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [492.314231] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [492.317864] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/bxt_guc_70.1.1.bin version 70.1.1

<6> [492.317883] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/bxt_huc_2.0.0.bin version 2.0.0

<7> [492.334716] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 100MHz, before = 100MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [492.337431] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [492.338458] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!

<6> [492.338511] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [492.338519] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [492.370167] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:59:pipe A] not active, skipping

<7> [492.370824] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:88:pipe B] not active, skipping

<7> [492.371359] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:109:pipe C] not active, skipping

<7> [492.371905] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [492.372569] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [492.374409] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [492.374964] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [492.375406] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [492.375957] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [492.383518] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [492.388863] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2

<7> [492.390466] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.391992] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.393826] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.395319] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.397051] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.398012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [492.398877] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.400530] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.404015] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.406530] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.408715] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.411936] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.412853] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0)

<7> [492.412889] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected

<7> [492.414155] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.415873] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.417264] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.418970] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.420879] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.422344] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.424413] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.427504] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.429086] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer

<7> [492.430083] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON

<7> [492.431555] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04

<7> [492.432555] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.75 quirks 0x0000

<7> [492.432601] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips

<7> [492.433156] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init

<7> [492.434598] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR

<7> [492.435173] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:DP-1] generating connector hotplug event

<7> [492.436536] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [492.439681] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:DP-2] generating connector hotplug event

<6> [492.439834] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [492.445758] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 2 outputs detected

<6> [492.474005] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [492.479800] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input71

<7> [492.481508] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [492.486513] [drm:drm_client_modeset_probe]

<7> [492.486611] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1]

<7> [492.486532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-a

<7> [492.486664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1]

<7> [492.487219] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] status updated from unknown to disconnected

<7> [492.487278] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] disconnected

<7> [492.487326] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2]

<7> [492.487370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2]

<7> [492.488458] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] status updated from unknown to disconnected

<7> [492.488867] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] disconnected

<7> [492.488913] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [492.488925] [drm:drm_client_modeset_probe] connector 111 enabled? no

<7> [492.488933] [drm:drm_client_modeset_probe] connector 123 enabled? no

<7> [492.489017] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [492.489041] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [492.489084] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [492.489128] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [492.489723] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [492.490315] i915 device info: pciid=0x5a85 rev=0x0b platform=BROXTON (subplatform=0x0) gen=9

<7> [492.490327] i915 device info: graphics version: 9

<7> [492.490332] i915 device info: media version: 9

<7> [492.490337] i915 device info: display version: 9

<7> [492.490342] i915 device info: graphics stepping: C0

<7> [492.490346] i915 device info: media stepping: C0

<7> [492.490351] i915 device info: display stepping: C0

<7> [492.490355] i915 device info: base die stepping: **

<7> [492.490360] i915 device info: gt: 0

<7> [492.490365] i915 device info: memory-regions: 0x21

<7> [492.490369] i915 device info: page-sizes: 0x11000

<7> [492.490374] i915 device info: platform: BROXTON

<7> [492.490379] i915 device info: ppgtt-size: 48

<7> [492.490384] i915 device info: ppgtt-type: 2

<7> [492.490389] i915 device info: dma_mask_size: 39

<7> [492.490394] i915 device info: is_mobile: no

<7> [492.490398] i915 device info: is_lp: yes

<7> [492.490403] i915 device info: require_force_probe: no

<7> [492.490408] i915 device info: is_dgfx: no

<7> [492.490412] i915 device info: has_64bit_reloc: yes

<7> [492.490417] i915 device info: has_64k_pages: no

<7> [492.490421] i915 device info: gpu_reset_clobbers_display: no

<7> [492.490426] i915 device info: has_reset_engine: yes

<7> [492.490430] i915 device info: has_3d_pipeline: yes

<7> [492.490435] i915 device info: has_4tile: no

<7> [492.490440] i915 device info: has_flat_ccs: no

<7> [492.490444] i915 device info: has_global_mocs: no

<7> [492.490448] i915 device info: has_gmd_id: no

<7> [492.490453] i915 device info: has_gt_uc: yes

<7> [492.490458] i915 device info: has_heci_pxp: no

<7> [492.490462] i915 device info: has_heci_gscfi: no

<7> [492.490467] i915 device info: has_guc_deprivilege: no

<7> [492.490508] i915 device info: has_l3_ccs_read: no

<7> [492.490515] i915 device info: has_l3_dpf: no

<7> [492.490519] i915 device info: has_llc: no

<7> [492.490524] i915 device info: has_logical_ring_contexts: yes

<7> [492.490528] i915 device info: has_logical_ring_elsq: no

<7> [492.490534] i915 device info: has_media_ratio_mode: no

<7> [492.490538] i915 device info: has_mslice_steering: no

<7> [492.490543] i915 device info: has_oa_bpc_reporting: no

<7> [492.490549] i915 device info: has_oa_slice_contrib_limits: no

<7> [492.490554] i915 device info: has_oam: no

<7> [492.490559] i915 device info: has_one_eu_per_fuse_bit: no

<7> [492.490564] i915 device info: has_pxp: no

<7> [492.490569] i915 device info: has_rc6: yes

<7> [492.490574] i915 device info: has_rc6p: no

<7> [492.490579] i915 device info: has_rps: yes

<7> [492.490584] i915 device info: has_runtime_pm: yes

<7> [492.490589] i915 device info: has_snoop: yes

<7> [492.490594] i915 device info: has_coherent_ggtt: no

<7> [492.490600] i915 device info: tuning_thread_rr_after_dep: no

<7> [492.490605] i915 device info: unfenced_needs_alignment: no

<7> [492.490610] i915 device info: hws_needs_physical: no

<7> [492.490615] i915 device info: has_pooled_eu: no

<7> [492.490620] i915 device info: cursor_needs_physical: no

<7> [492.490625] i915 device info: has_cdclk_crawl: no

<7> [492.490630] i915 device info: has_cdclk_squash: no

<7> [492.490635] i915 device info: has_ddi: yes

<7> [492.490640] i915 device info: has_dp_mst: yes

<7> [492.490645] i915 device info: has_dsb: no

<7> [492.490650] i915 device info: has_fpga_dbg: yes

<7> [492.490656] i915 device info: has_gmch: no

<7> [492.490661] i915 device info: has_hotplug: yes

<7> [492.490666] i915 device info: has_hti: no

<7> [492.490671] i915 device info: has_ipc: yes

<7> [492.490676] i915 device info: has_overlay: no

<7> [492.490681] i915 device info: has_psr: yes

<7> [492.490686] i915 device info: has_psr_hw_tracking: yes

<7> [492.490692] i915 device info: overlay_needs_physical: no

<7> [492.490697] i915 device info: supports_tv: no

<7> [492.490702] i915 device info: has_hdcp: yes

<7> [492.490707] i915 device info: has_dmc: yes

<7> [492.490712] i915 device info: has_dsc: no

<7> [492.490717] i915 device info: rawclk rate: 266667 kHz

<7> [492.490723] i915 device info: iommu: enabled

<7> [492.490729] i915 device info: available engines: 40403

<7> [492.490735] i915 device info: slice total: 1, mask=0001

<7> [492.490742] i915 device info: subslice total: 2

<7> [492.490747] i915 device info: slice0: 2 subslices, mask=00000006

<7> [492.490753] i915 device info: EU total: 12

<7> [492.490757] i915 device info: EU per subslice: 6

<7> [492.490762] i915 device info: has slice power gating: no

<7> [492.490767] i915 device info: has subslice power gating: yes

<7> [492.490771] i915 device info: has EU power gating: yes

<6> [492.490778] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [492.490783] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [492.490788] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [492.491222] [drm:drm_client_modeset_probe]

<7> [492.491310] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1]

<7> [492.491364] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1]

<6> [492.491680] i915: Performing live selftests with st_random_seed=0x49c745a4 st_timeout=500

<6> [492.491753] i915: Running intel_slpc_live_selftests/live_slpc_vary_max

<6> [492.491791] i915: Running intel_slpc_live_selftests/live_slpc_vary_min

<6> [492.491819] i915: Running intel_slpc_live_selftests/live_slpc_max_granted

<6> [492.491847] i915: Running intel_slpc_live_selftests/live_slpc_power

<6> [492.491874] i915: Running intel_slpc_live_selftests/live_slpc_tile_interaction

<7> [492.492390] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:111:DP-1] disconnected

<7> [492.492449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2]

<7> [492.492297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a

<7> [492.492512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2]

<7> [492.493058] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:123:DP-2] disconnected

<7> [492.493108] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [492.493120] [drm:drm_client_modeset_probe] connector 111 enabled? no

<7> [492.493129] [drm:drm_client_modeset_probe] connector 123 enabled? no

<7> [492.493251] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [492.493277] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [492.493326] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [492.493370] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [492.521288] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [492.591373] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [492.706408] i915: probe of 0000:00:02.0 failed with error -25

Results for igt@i915_selftest@live@slpc