igt@i915_selftest@live@gt_mocs on fi-kbl-guc@linus-v6.3-rc7 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g066fa5410 (x86_64) (Linux: 6.3.0-rc7-linus-v6.3-rc7-g6a8f57ae2eb0+ x86_64)
Out	Starting dynamic subtest: gt_mocs Dynamic subtest gt_mocs: SUCCESS (0.842s)
Err	Starting dynamic subtest: gt_mocs Dynamic subtest gt_mocs: SUCCESS (0.842s)
Dmesg	<6> [147.941132] [IGT] i915_selftest: starting dynamic subtest gt_mocs <5> [148.038326] Setting dangerous option enable_guc - tainting kernel <5> [148.038335] Setting dangerous option live_selftests - tainting kernel <7> [148.079764] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [148.079974] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [148.080113] i915 0000:00:02.0: [drm] Incompatible option enable_guc=3 - GuC submission is N/A <7> [148.080124] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [148.080225] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [148.080405] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [148.080608] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [148.080764] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [148.081353] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [148.081494] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [148.081639] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [148.081762] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [148.081767] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [148.082428] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [148.082445] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [148.082641] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [148.082978] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018 <7> [148.083191] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [148.083318] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [148.083443] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [148.083566] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [148.087625] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [148.087768] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [148.087902] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [148.088033] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [148.088164] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [148.088268] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [148.088369] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [148.088468] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [148.088569] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [148.088684] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [148.088799] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [148.088892] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [148.088983] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [148.089074] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [148.089700] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [148.089841] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [148.090007] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [148.090207] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [148.090396] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [148.090555] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [148.090720] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [148.090866] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [148.091002] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [148.091138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [148.091297] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [148.091433] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [148.091639] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [148.091803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [148.091957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [148.092105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [148.092241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [148.092375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [148.092505] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [148.092673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [148.092812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [148.092972] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [148.093133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [148.093286] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [148.093431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [148.093614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [148.093780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [148.093938] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [148.094603] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [148.094748] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [148.094895] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [148.095097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.095230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [148.095397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [148.095702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [148.095882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [148.096017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [148.096153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [148.096294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [148.096480] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [148.097057] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [148.097497] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [148.097449] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [148.097581] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [148.097762] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [148.097878] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [148.097968] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [148.098058] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [148.098147] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [148.098236] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [148.098325] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [148.098414] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [148.099622] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [148.100633] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [148.100835] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present <7> [148.100982] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default) <7> [148.101155] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [148.101297] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT) <7> [148.101647] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (platform default) <7> [148.101813] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [148.101937] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT) <7> [148.102133] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [148.102312] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port E (VBT) <7> [148.102478] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E] <7> [148.102774] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [148.103159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [148.103353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [148.103516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [148.103668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [148.103831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [148.103970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [148.104137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [148.104295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [148.104435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [148.104570] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [148.104723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [148.104891] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [148.105029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [148.105164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [148.105299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A <7> [148.105438] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [148.105576] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [148.105723] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [148.105885] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [148.106066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [148.106234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [148.106401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [148.106537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [148.106677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [148.106838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [148.106968] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [148.107131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [148.107278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [148.107412] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [148.107541] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [148.107686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [148.107840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [148.107995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [148.108142] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [148.108303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [148.108440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [148.108576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [148.108739] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [148.108897] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [148.109044] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [148.109179] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [148.110193] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [148.110325] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 1000] for use by error capture <7> [148.110435] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7> [148.110552] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [148.110702] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [148.111770] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [148.111906] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [148.112036] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [148.115526] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [148.115715] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [148.143374] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [148.143544] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [148.143687] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [148.143868] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [148.144047] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [148.144200] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004 <7> [148.144329] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [148.144456] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [148.144583] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [148.144723] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [148.144850] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [148.144977] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [148.145103] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [148.145229] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [148.145355] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GSC loads huc=no <6> [148.146646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [148.146651] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [148.153669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [148.153970] i915 0000:00:02.0: [drm] HuC authenticated <6> [148.153973] i915 0000:00:02.0: [drm] GT0: GuC submission disabled <6> [148.153976] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled <7> [148.161740] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [148.161976] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [148.162105] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [148.162229] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [148.162353] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [148.162497] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [148.162976] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [148.163109] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [148.163210] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [148.163337] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [148.167042] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [148.167355] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [148.167682] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1 <7> [148.168267] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <6> [148.168322] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [148.170388] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [148.185208] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [148.186107] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input55 <7> [148.186763] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [148.186987] [drm:drm_client_modeset_probe] <7> [148.187023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [148.186987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [148.187041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [148.187178] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [148.187197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [148.187211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [148.187223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [148.187201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [148.187347] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [148.187359] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [148.187370] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [148.187382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [148.187394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [148.187506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [148.187518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [148.187528] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [148.187532] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [148.187534] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [148.187537] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [148.187566] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [148.187574] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [148.187609] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [148.187629] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [148.187601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [148.188257] [drm:drm_client_modeset_probe] <7> [148.188296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [148.188311] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [148.188302] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [148.188449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [148.188461] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [148.188488] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [148.188493] i915 device info: graphics version: 9 <7> [148.188496] i915 device info: media version: 9 <7> [148.188498] i915 device info: display version: 9 <7> [148.188501] i915 device info: gt: 2 <7> [148.188504] i915 device info: memory-regions: 21 <7> [148.188507] i915 device info: page-sizes: 11000 <7> [148.188509] i915 device info: platform: KABYLAKE <7> [148.188512] i915 device info: ppgtt-size: 48 <7> [148.188515] i915 device info: ppgtt-type: 2 <7> [148.188518] i915 device info: dma_mask_size: 39 <7> [148.188521] i915 device info: is_mobile: no <7> [148.188524] i915 device info: is_lp: no <7> [148.188526] i915 device info: require_force_probe: no <7> [148.188529] i915 device info: is_dgfx: no <7> [148.188532] i915 device info: has_64bit_reloc: yes <7> [148.188473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [148.188535] i915 device info: has_64k_pages: no <7> [148.188538] i915 device info: gpu_reset_clobbers_display: no <7> [148.188540] i915 device info: has_reset_engine: yes <7> [148.188543] i915 device info: has_3d_pipeline: yes <7> [148.188545] i915 device info: has_4tile: no <7> [148.188547] i915 device info: has_flat_ccs: no <7> [148.188550] i915 device info: has_global_mocs: no <7> [148.188552] i915 device info: has_gmd_id: no <7> [148.188555] i915 device info: has_gt_uc: yes <7> [148.188557] i915 device info: has_heci_pxp: no <7> [148.188559] i915 device info: has_heci_gscfi: no <7> [148.188562] i915 device info: has_guc_deprivilege: no <7> [148.188564] i915 device info: has_l3_ccs_read: no <7> [148.188566] i915 device info: has_l3_dpf: no <7> [148.188569] i915 device info: has_llc: yes <7> [148.188571] i915 device info: has_logical_ring_contexts: yes <7> [148.188573] i915 device info: has_logical_ring_elsq: no <7> [148.188576] i915 device info: has_media_ratio_mode: no <7> [148.188578] i915 device info: has_mslice_steering: no <7> [148.188581] i915 device info: has_oa_bpc_reporting: no <7> [148.188583] i915 device info: has_oa_slice_contrib_limits: no <7> [148.188607] i915 device info: has_one_eu_per_fuse_bit: no <7> [148.188610] i915 device info: has_pxp: no <7> [148.188613] i915 device info: has_rc6: yes <7> [148.188616] i915 device info: has_rc6p: no <7> [148.188618] i915 device info: has_rps: yes <7> [148.188612] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [148.188621] i915 device info: has_runtime_pm: yes <7> [148.188623] i915 device info: has_snoop: no <7> [148.188625] i915 device info: has_coherent_ggtt: yes <7> [148.188628] i915 device info: tuning_thread_rr_after_dep: no <7> [148.188629] i915 device info: unfenced_needs_alignment: no <7> [148.188631] i915 device info: hws_needs_physical: no <7> [148.188634] i915 device info: has_pooled_eu: no <7> [148.188637] i915 device info: cursor_needs_physical: no <7> [148.188640] i915 device info: has_cdclk_crawl: no <7> [148.188634] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [148.188643] i915 device info: has_cdclk_squash: no <7> [148.188645] i915 device info: has_ddi: yes <7> [148.188647] i915 device info: has_dp_mst: yes <7> [148.188649] i915 device info: has_dsb: no <7> [148.188651] i915 device info: has_fpga_dbg: yes <7> [148.188652] i915 device info: has_gmch: no <7> [148.188655] i915 device info: has_hotplug: yes <7> [148.188658] i915 device info: has_hti: no <7> [148.188661] i915 device info: has_ipc: yes <7> [148.188664] i915 device info: has_modular_fia: no <7> [148.188666] i915 device info: has_overlay: no <7> [148.188669] i915 device info: has_psr: yes <7> [148.188672] i915 device info: has_psr_hw_tracking: yes <7> [148.188675] i915 device info: overlay_needs_physical: no <7> [148.188677] i915 device info: supports_tv: no <7> [148.188680] i915 device info: has_hdcp: yes <7> [148.188683] i915 device info: has_dmc: yes <7> [148.188686] i915 device info: has_dsc: no <7> [148.188689] i915 device info: rawclk rate: 24000 kHz <7> [148.188692] i915 device info: iommu: enabled <7> [148.188694] i915 device info: available engines: 40403 <7> [148.188698] i915 device info: slice total: 1, mask=0001 <7> [148.188701] i915 device info: subslice total: 3 <7> [148.188704] i915 device info: slice0: 3 subslices, mask=00000007 <7> [148.188707] i915 device info: slice1: 0 subslices, mask=00000000 <7> [148.188710] i915 device info: slice2: 0 subslices, mask=00000000 <7> [148.188713] i915 device info: EU total: 24 <7> [148.188716] i915 device info: EU per subslice: 8 <7> [148.188719] i915 device info: has slice power gating: no <7> [148.188722] i915 device info: has subslice power gating: no <7> [148.188725] i915 device info: has EU power gating: yes <6> [148.188728] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [148.188731] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [148.188734] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [148.188738] i915: Performing live selftests with st_random_seed=0xbfd4890d st_timeout=500 <7> [148.188656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <6> [148.188742] i915: Running gt_mocs <6> [148.188766] i915: Running intel_mocs_live_selftests/live_mocs_kernel <7> [148.188830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [148.188848] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [148.188853] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [148.188858] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [148.188862] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [148.188879] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [148.188891] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [148.188915] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [148.188933] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [148.211699] i915: Running intel_mocs_live_selftests/live_mocs_clean <7> [148.227614] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.238598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <6> [148.244745] i915: Running intel_mocs_live_selftests/live_mocs_reset <5> [148.245097] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs <5> [148.247525] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs <5> [148.247993] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [148.248884] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [148.248889] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [148.250604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.251221] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [148.251530] i915 0000:00:02.0: [drm] HuC authenticated <6> [148.251539] i915 0000:00:02.0: [drm] GT0: GuC submission disabled <6> [148.251542] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled <5> [148.252261] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs <5> [148.253773] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs <5> [148.254061] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [148.254244] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [148.254248] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [148.256333] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [148.256571] i915 0000:00:02.0: [drm] HuC authenticated <6> [148.256580] i915 0000:00:02.0: [drm] GT0: GuC submission disabled <6> [148.256582] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled <5> [148.257699] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs <5> [148.259014] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs <5> [148.259361] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [148.259548] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [148.259553] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [148.261601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.261665] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [148.261872] i915 0000:00:02.0: [drm] HuC authenticated <6> [148.261879] i915 0000:00:02.0: [drm] GT0: GuC submission disabled <6> [148.261882] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled <5> [148.262490] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs <5> [148.263832] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs <5> [148.264039] i915 0000:00:02.0: [drm] Resetting chip for mocs <6> [148.264225] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [148.264229] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [148.266329] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [148.266566] i915 0000:00:02.0: [drm] HuC authenticated <6> [148.266573] i915 0000:00:02.0: [drm] GT0: GuC submission disabled <6> [148.266575] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled <7> [148.272600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.283597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.287627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [148.287790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [148.287948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [148.288104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [148.294600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.305598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.312762] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [148.318618] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.329599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.340598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.351598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.362596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.373596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.384599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.395596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.406598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.417597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.428602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.439597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.450598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.461596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.472599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.483597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.494597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.505598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.516599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.527597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.538598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.549599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.560597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.571596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff) <7> [148.571758] [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI E/PHY E: Too many retries, giving up. First error: -110 <7> [148.587496] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [148.635005] i915: probe of 0000:00:02.0 failed with error -25

<6> [147.941132] [IGT] i915_selftest: starting dynamic subtest gt_mocs

<5> [148.038326] Setting dangerous option enable_guc - tainting kernel

<5> [148.038335] Setting dangerous option live_selftests - tainting kernel

<7> [148.079764] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [148.079974] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [148.080113] i915 0000:00:02.0: [drm] Incompatible option enable_guc=3 - GuC submission is N/A

<7> [148.080124] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [148.080225] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [148.080405] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [148.080608] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [148.080764] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [148.081353] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [148.081494] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [148.081639] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [148.081762] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [148.081767] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [148.082428] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [148.082445] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [148.082641] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [148.082978] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018

<7> [148.083191] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [148.083318] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [148.083443] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [148.083566] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [148.087625] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [148.087768] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [148.087902] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [148.088033] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [148.088164] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [148.088268] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [148.088369] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [148.088468] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [148.088569] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [148.088684] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [148.088799] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [148.088892] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [148.088983] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [148.089074] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [148.089700] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [148.089841] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [148.090007] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [148.090207] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [148.090396] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [148.090555] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [148.090720] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [148.090866] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [148.091002] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [148.091138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [148.091297] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [148.091433] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [148.091639] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [148.091803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [148.091957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [148.092105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [148.092241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [148.092375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [148.092505] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [148.092673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [148.092812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [148.092972] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [148.093133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [148.093286] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [148.093431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [148.093614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [148.093780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [148.093938] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [148.094603] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [148.094748] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [148.094895] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [148.095097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.095230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [148.095397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [148.095702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [148.095882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [148.096017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [148.096153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [148.096294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [148.096480] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [148.097057] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [148.097497] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [148.097449] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [148.097581] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [148.097762] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [148.097878] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [148.097968] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [148.098058] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [148.098147] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [148.098236] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [148.098325] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [148.098414] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [148.099622] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [148.100633] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [148.100835] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present

<7> [148.100982] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)

<7> [148.101155] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [148.101297] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)

<7> [148.101647] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (platform default)

<7> [148.101813] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [148.101937] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)

<7> [148.102133] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [148.102312] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port E (VBT)

<7> [148.102478] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]

<7> [148.102774] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [148.103159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [148.103353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [148.103516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [148.103668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [148.103831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [148.103970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [148.104137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [148.104295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [148.104435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [148.104570] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [148.104723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [148.104891] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [148.105029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [148.105164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [148.105299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [148.105438] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [148.105576] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [148.105723] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [148.105885] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [148.106066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [148.106234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [148.106401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [148.106537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [148.106677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [148.106838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [148.106968] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [148.107131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [148.107278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [148.107412] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [148.107541] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [148.107686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [148.107840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [148.107995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [148.108142] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [148.108303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [148.108440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [148.108576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [148.108739] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [148.108897] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [148.109044] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [148.109179] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [148.110193] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [148.110325] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 1000] for use by error capture

<7> [148.110435] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000]

<7> [148.110552] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [148.110702] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [148.111770] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [148.111906] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [148.112036] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [148.115526] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [148.115715] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [148.143374] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [148.143544] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [148.143687] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [148.143868] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [148.144047] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [148.144200] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004

<7> [148.144329] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [148.144456] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [148.144583] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [148.144723] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [148.144850] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [148.144977] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [148.145103] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [148.145229] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [148.145355] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GSC loads huc=no

<6> [148.146646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [148.146651] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [148.153669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [148.153970] i915 0000:00:02.0: [drm] HuC authenticated

<6> [148.153973] i915 0000:00:02.0: [drm] GT0: GuC submission disabled

<6> [148.153976] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled

<7> [148.161740] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [148.161976] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [148.162105] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [148.162229] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [148.162353] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [148.162497] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [148.162976] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [148.163109] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [148.163210] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [148.163337] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [148.167042] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [148.167355] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [148.167682] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1

<7> [148.168267] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<6> [148.168322] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [148.170388] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [148.185208] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [148.186107] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input55

<7> [148.186763] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [148.186987] [drm:drm_client_modeset_probe]

<7> [148.187023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [148.186987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [148.187041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [148.187178] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [148.187197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [148.187211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [148.187223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [148.187201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [148.187347] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [148.187359] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [148.187370] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [148.187382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [148.187394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [148.187506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [148.187518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [148.187528] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [148.187532] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [148.187534] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [148.187537] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [148.187566] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [148.187574] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [148.187609] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [148.187629] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [148.187601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [148.188257] [drm:drm_client_modeset_probe]

<7> [148.188296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [148.188311] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [148.188302] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [148.188449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [148.188461] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [148.188488] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [148.188493] i915 device info: graphics version: 9

<7> [148.188496] i915 device info: media version: 9

<7> [148.188498] i915 device info: display version: 9

<7> [148.188501] i915 device info: gt: 2

<7> [148.188504] i915 device info: memory-regions: 21

<7> [148.188507] i915 device info: page-sizes: 11000

<7> [148.188509] i915 device info: platform: KABYLAKE

<7> [148.188512] i915 device info: ppgtt-size: 48

<7> [148.188515] i915 device info: ppgtt-type: 2

<7> [148.188518] i915 device info: dma_mask_size: 39

<7> [148.188521] i915 device info: is_mobile: no

<7> [148.188524] i915 device info: is_lp: no

<7> [148.188526] i915 device info: require_force_probe: no

<7> [148.188529] i915 device info: is_dgfx: no

<7> [148.188532] i915 device info: has_64bit_reloc: yes

<7> [148.188473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [148.188535] i915 device info: has_64k_pages: no

<7> [148.188538] i915 device info: gpu_reset_clobbers_display: no

<7> [148.188540] i915 device info: has_reset_engine: yes

<7> [148.188543] i915 device info: has_3d_pipeline: yes

<7> [148.188545] i915 device info: has_4tile: no

<7> [148.188547] i915 device info: has_flat_ccs: no

<7> [148.188550] i915 device info: has_global_mocs: no

<7> [148.188552] i915 device info: has_gmd_id: no

<7> [148.188555] i915 device info: has_gt_uc: yes

<7> [148.188557] i915 device info: has_heci_pxp: no

<7> [148.188559] i915 device info: has_heci_gscfi: no

<7> [148.188562] i915 device info: has_guc_deprivilege: no

<7> [148.188564] i915 device info: has_l3_ccs_read: no

<7> [148.188566] i915 device info: has_l3_dpf: no

<7> [148.188569] i915 device info: has_llc: yes

<7> [148.188571] i915 device info: has_logical_ring_contexts: yes

<7> [148.188573] i915 device info: has_logical_ring_elsq: no

<7> [148.188576] i915 device info: has_media_ratio_mode: no

<7> [148.188578] i915 device info: has_mslice_steering: no

<7> [148.188581] i915 device info: has_oa_bpc_reporting: no

<7> [148.188583] i915 device info: has_oa_slice_contrib_limits: no

<7> [148.188607] i915 device info: has_one_eu_per_fuse_bit: no

<7> [148.188610] i915 device info: has_pxp: no

<7> [148.188613] i915 device info: has_rc6: yes

<7> [148.188616] i915 device info: has_rc6p: no

<7> [148.188618] i915 device info: has_rps: yes

<7> [148.188612] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [148.188621] i915 device info: has_runtime_pm: yes

<7> [148.188623] i915 device info: has_snoop: no

<7> [148.188625] i915 device info: has_coherent_ggtt: yes

<7> [148.188628] i915 device info: tuning_thread_rr_after_dep: no

<7> [148.188629] i915 device info: unfenced_needs_alignment: no

<7> [148.188631] i915 device info: hws_needs_physical: no

<7> [148.188634] i915 device info: has_pooled_eu: no

<7> [148.188637] i915 device info: cursor_needs_physical: no

<7> [148.188640] i915 device info: has_cdclk_crawl: no

<7> [148.188634] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [148.188643] i915 device info: has_cdclk_squash: no

<7> [148.188645] i915 device info: has_ddi: yes

<7> [148.188647] i915 device info: has_dp_mst: yes

<7> [148.188649] i915 device info: has_dsb: no

<7> [148.188651] i915 device info: has_fpga_dbg: yes

<7> [148.188652] i915 device info: has_gmch: no

<7> [148.188655] i915 device info: has_hotplug: yes

<7> [148.188658] i915 device info: has_hti: no

<7> [148.188661] i915 device info: has_ipc: yes

<7> [148.188664] i915 device info: has_modular_fia: no

<7> [148.188666] i915 device info: has_overlay: no

<7> [148.188669] i915 device info: has_psr: yes

<7> [148.188672] i915 device info: has_psr_hw_tracking: yes

<7> [148.188675] i915 device info: overlay_needs_physical: no

<7> [148.188677] i915 device info: supports_tv: no

<7> [148.188680] i915 device info: has_hdcp: yes

<7> [148.188683] i915 device info: has_dmc: yes

<7> [148.188686] i915 device info: has_dsc: no

<7> [148.188689] i915 device info: rawclk rate: 24000 kHz

<7> [148.188692] i915 device info: iommu: enabled

<7> [148.188694] i915 device info: available engines: 40403

<7> [148.188698] i915 device info: slice total: 1, mask=0001

<7> [148.188701] i915 device info: subslice total: 3

<7> [148.188704] i915 device info: slice0: 3 subslices, mask=00000007

<7> [148.188707] i915 device info: slice1: 0 subslices, mask=00000000

<7> [148.188710] i915 device info: slice2: 0 subslices, mask=00000000

<7> [148.188713] i915 device info: EU total: 24

<7> [148.188716] i915 device info: EU per subslice: 8

<7> [148.188719] i915 device info: has slice power gating: no

<7> [148.188722] i915 device info: has subslice power gating: no

<7> [148.188725] i915 device info: has EU power gating: yes

<6> [148.188728] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [148.188731] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [148.188734] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [148.188738] i915: Performing live selftests with st_random_seed=0xbfd4890d st_timeout=500

<7> [148.188656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<6> [148.188766] i915: Running intel_mocs_live_selftests/live_mocs_kernel

<7> [148.188830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [148.188848] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [148.188853] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [148.188858] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [148.188862] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [148.188879] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [148.188891] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [148.188915] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [148.188933] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [148.211699] i915: Running intel_mocs_live_selftests/live_mocs_clean

<7> [148.227614] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.238598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<6> [148.244745] i915: Running intel_mocs_live_selftests/live_mocs_reset

<5> [148.245097] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs

<5> [148.247525] i915 0000:00:02.0: [drm] Resetting rcs0 for mocs

<5> [148.247993] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [148.248884] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [148.248889] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [148.250604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.251221] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [148.251530] i915 0000:00:02.0: [drm] HuC authenticated

<6> [148.251539] i915 0000:00:02.0: [drm] GT0: GuC submission disabled

<6> [148.251542] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled

<5> [148.252261] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs

<5> [148.253773] i915 0000:00:02.0: [drm] Resetting bcs0 for mocs

<5> [148.254061] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [148.254244] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [148.254248] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [148.256333] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [148.256571] i915 0000:00:02.0: [drm] HuC authenticated

<6> [148.256580] i915 0000:00:02.0: [drm] GT0: GuC submission disabled

<6> [148.256582] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled

<5> [148.257699] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs

<5> [148.259014] i915 0000:00:02.0: [drm] Resetting vcs0 for mocs

<5> [148.259361] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [148.259548] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [148.259553] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [148.261601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.261665] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [148.261872] i915 0000:00:02.0: [drm] HuC authenticated

<6> [148.261879] i915 0000:00:02.0: [drm] GT0: GuC submission disabled

<6> [148.261882] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled

<5> [148.262490] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs

<5> [148.263832] i915 0000:00:02.0: [drm] Resetting vecs0 for mocs

<5> [148.264039] i915 0000:00:02.0: [drm] Resetting chip for mocs

<6> [148.264225] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [148.264229] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [148.266329] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [148.266566] i915 0000:00:02.0: [drm] HuC authenticated

<6> [148.266573] i915 0000:00:02.0: [drm] GT0: GuC submission disabled

<6> [148.266575] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled

<7> [148.272600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.283597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.287627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [148.287790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [148.287948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [148.288104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [148.294600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.305598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.312762] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [148.318618] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.329599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.340598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.351598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.362596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.373596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.384599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.395596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.406598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.417597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.428602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.439597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.450598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.461596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.472599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.483597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.494597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.505598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.516599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.527597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.538598] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.549599] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.560597] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.571596] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI E/PHY E: timeout (status 0x7d4003ff)

<7> [148.571758] [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI E/PHY E: Too many retries, giving up. First error: -110

<7> [148.587496] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [148.635005] i915: probe of 0000:00:02.0 failed with error -25

Results for igt@i915_selftest@live@gt_mocs