Result:
git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0
| Detail | Value |
|---|---|
| Igt-Version |
IGT-Version: 1.27.1-gb4252c86f (x86_64) (Linux: 6.3.0-rc6-linus-v6.3-rc6-g09a9639e56c0+ x86_64) |
| Out |
Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x76/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xb52/0xe30 [i915] intel_atomic_commit+0x380/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 Wakeref count: 0 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_power_domains_init_hw+0x62/0x540 [i915] intel_modeset_init_noirq+0x7e/0x2e0 [i915] i915_driver_probe+0x5a0/0xda0 [i915] i915_pci_probe+0xcb/0x1d0 [i915] pci_device_probe+0x95/0x120 really_probe+0x164/0x3c0 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x100 [i915] snd_hdac_display_power+0x7d/0x120 [snd_hda_core] azx_probe_work+0x9e/0x8f0 [snd_hda_intel] process_one_work+0x250/0x510 worker_thread+0x4f/0x3a0 kthread+0xf3/0x120 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect+0x7d/0xa0 [drm_kms_helper] drm_helper_probe_single_connector_modes+0x338/0x510 [drm_kms_helper] drm_mode_getconnector+0x3d9/0x4a0 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_hdmi_detect+0xca/0x160 [i915] drm_helper_probe_detect+0x7d/0xa0 [drm_kms_helper] drm_helper_probe_single_connector_modes+0x338/0x510 [drm_kms_helper] drm_mode_getconnector+0x3d9/0x4a0 drm_ioctl_kernel+0xb4/0x150 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x100 [i915] snd_hdac_display_power+0x7d/0x120 [snd_hda_core] azx_probe_work+0x9e/0x8f0 [snd_hda_intel] process_one_work+0x250/0x510 worker_thread+0x4f/0x3a0 kthread+0xf3/0x120 Subtest module-reload: SUCCESS (5.220s) |
| Err |
Starting subtest: module-reload Subtest module-reload: SUCCESS (5.220s) |
| Dmesg |
<6> [129.104550] [IGT] i915_pm_rpm: executing
<7> [129.105887] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [129.106294] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [129.106312] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [129.107061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [129.107174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [129.107501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [129.107628] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [129.107633] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.107734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [129.110536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [129.110540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [129.110743] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [129.110825] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [129.110838] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [129.111159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.111261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.111576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.111693] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.111697] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.111798] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.114988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.114993] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.115097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [129.115172] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [129.115184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [129.115351] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [129.119082] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [129.119097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [129.119435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [129.119545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [129.119836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [129.119954] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [129.119958] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.120058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [129.122859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [129.122864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [129.122968] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [129.123505] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [129.123518] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [129.123833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.123935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.124218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.124334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.124338] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.124453] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.127288] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.127293] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.127413] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [129.127904] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [129.127917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [129.128045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [129.128413] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [129.128428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [129.128750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [129.128851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [129.129140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [129.129256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [129.129260] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.129360] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [129.132194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [129.132199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [129.132304] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [129.132331] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [129.132343] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [129.132673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.132775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.133058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.133174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.133178] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.133277] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.136075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.136079] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.136182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [129.136209] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [129.136221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [129.136345] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [130.140124] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [130.140731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.142065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.142795] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.143510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.144209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.144335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.144528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.145108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.145696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.145872] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.146035] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.146640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.146969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.147545] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [130.149733] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [130.152736] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.177220] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.183792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [130.184847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.185021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.185177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.185668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.186234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.186410] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.186592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.187203] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.187341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.188319] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [130.188841] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [130.192416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.216755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.223029] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [130.223573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.223718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.223883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.224331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.224916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.225099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.225257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.225872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.226093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.227068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [130.227563] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [130.231340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.255746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.263292] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [130.263833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.264004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.265302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [130.265513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [130.266269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [130.266834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [130.266869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.267036] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [130.283115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [130.283123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [130.283278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.283610] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1
<7> [130.283640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [130.283837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.285074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.285239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.285944] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.286446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.286452] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.286585] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.302866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.302871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.302994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.303126] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [130.303142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [130.303260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.303851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.304018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [130.304038] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [130.304189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.304901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [130.305013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [130.305684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [130.306196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [130.306201] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.306310] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [130.321469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [130.321474] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [130.321587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.321721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1
<7> [130.321736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [130.321854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.322502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.322613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.322957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.323451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.323468] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.323577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.338678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.338683] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.338796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.338930] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [130.338945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [130.339065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.339520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.339654] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [130.339670] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.340683] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [130.344342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.456591] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.470482] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [130.471560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [130.472080] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.472423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.472597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.473093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.473654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.473853] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [130.474070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [130.474226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [130.474559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [130.474733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [130.474740] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.474898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [130.477957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [130.477965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [130.478124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1
<7> [130.478148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [130.478553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.478710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.479053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.479225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.479232] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.479401] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.482465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.482472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.482632] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [130.482655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [130.482847] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [130.486503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.486679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.486814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.486945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.487525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [130.655235] [IGT] i915_pm_rpm: starting subtest module-reload
<7> [130.783851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.784002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.784478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.785031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.785289] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [130.792560] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [130.792701] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [130.792816] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [130.792929] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [130.793043] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [130.793156] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [130.793268] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [130.793394] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [130.793508] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [130.793962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.794260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.794404] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.794560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.795147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.827162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.827303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.827741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.828305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.828533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E
<7> [130.828678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B
<7> [130.828841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C
<7> [130.829006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D
<7> [130.851610] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]
<7> [130.895946] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper
<6> [131.146836] [IGT] Reloading i915 w/o display
<5> [131.301514] Setting dangerous option enable_guc - tainting kernel
<7> [131.341960] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K
<7> [131.342169] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=3 (guc:yes submission:no huc:yes slpc:no)
<6> [131.342312] i915 0000:00:02.0: [drm] Incompatible option enable_guc=3 - GuC submission is N/A
<7> [131.342323] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH
<7> [131.342460] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02
<7> [131.342654] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7> [131.342887] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7> [131.343005] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz
<7> [131.343550] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [131.343661] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [131.343766] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
<6> [131.343869] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6> [131.343874] i915 0000:00:02.0: vgaarb: deactivate vga console
<6> [131.344243] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7> [131.344260] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047
<7> [131.344413] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
<7> [131.344705] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018
<7> [131.344856] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
<7> [131.344984] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [131.345111] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x
<7> [131.345237] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported
<7> [131.348384] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
<7> [131.348520] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [131.348647] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7> [131.348774] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
<7> [131.348902] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4
<7> [131.349001] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no
<7> [131.349096] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [131.349190] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no
<7> [131.349283] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no
<7> [131.349388] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [131.349482] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no
<7> [131.349574] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes
<7> [131.349666] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2
<7> [131.349797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no
<7> [131.350207] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [131.350412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206
<7> [131.350562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)
<7> [131.350726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)
<7> [131.350922] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)
<7> [131.351097] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7> [131.351249] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)
<7> [131.351450] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)
<7> [131.351643] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7> [131.351793] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)
<7> [131.351959] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)
<7> [131.352154] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)
<7> [131.352343] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [131.352510] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [131.352653] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7> [131.352812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7> [131.353001] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7> [131.353192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [131.353326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [131.353497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4
<7> [131.353665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [131.353854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8
<7> [131.354004] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [131.354146] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0
<7> [131.354307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [131.354554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [131.354738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO
<7> [131.354888] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [131.355521] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
<7> [131.355679] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz
<7> [131.355886] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [131.356100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.356244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.356433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [131.356637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.356823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E
<7> [131.356976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B
<7> [131.357143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C
<7> [131.357332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D
<7> [131.357571] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin
<6> [131.358451] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
<7> [131.358944] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7> [131.359428] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV
<7> [131.359565] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us
<7> [131.359718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
<7> [131.359845] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
<7> [131.359983] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
<7> [131.360082] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
<7> [131.360174] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
<7> [131.360264] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
<7> [131.360402] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
<7> [131.360541] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
<7> [131.361880] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.
<7> [131.363059] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
<7> [131.363244] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present
<7> [131.363414] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
<7> [131.363615] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]
<7> [131.363751] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
<7> [131.364181] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (platform default)
<7> [131.364362] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]
<7> [131.364561] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
<7> [131.364837] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present
<7> [131.365022] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port E (VBT)
<7> [131.365180] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]
<7> [131.365515] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported
<7> [131.365942] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled
<7> [131.366121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled
<7> [131.366332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled
<7> [131.366540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [131.366686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A
<7> [131.366855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A
<7> [131.367048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B
<7> [131.367216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B
<7> [131.367364] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B
<7> [131.367563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C
<7> [131.367755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C
<7> [131.367906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C
<7> [131.368058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A
<7> [131.368246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A
<7> [131.368453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A
<7> [131.368601] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1
<7> [131.368769] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [131.368969] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [131.369139] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [131.369330] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled
<7> [131.369545] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled
<7> [131.369733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled
<7> [131.369871] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz
<7> [131.370028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz
<7> [131.370211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz
<7> [131.370409] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0
<7> [131.370569] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz
<7> [131.370701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz
<7> [131.370858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz
<7> [131.371035] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0
<7> [131.371224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz
<7> [131.371367] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz
<7> [131.371542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz
<7> [131.371727] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0
<7> [131.371923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]
<7> [131.372068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]
<7> [131.372242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]
<7> [131.372452] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling
<7> [131.372601] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [131.372755] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [131.372932] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [131.374130] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)
<7> [131.374282] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 1000] for use by error capture
<7> [131.374412] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000]
<7> [131.374588] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0
<7> [131.374742] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global
<7> [131.375907] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0
<7> [131.376044] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0
<7> [131.376175] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0
<7> [131.379608] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7> [131.379786] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset
<7> [131.407113] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f
<7> [131.407284] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0
<7> [131.407433] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000
<7> [131.407616] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7> [131.407790] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a
<7> [131.407921] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004
<7> [131.408062] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7> [131.408191] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7> [131.408319] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7> [131.408458] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7> [131.408586] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7> [131.408714] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7> [131.408842] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7> [131.408969] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<7> [131.409097] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GSC loads huc=no
<6> [131.410341] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
<6> [131.410345] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
<7> [131.417475] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6> [131.417776] i915 0000:00:02.0: [drm] HuC authenticated
<6> [131.417779] i915 0000:00:02.0: [drm] GT0: GuC submission disabled
<6> [131.417782] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled
<7> [131.425616] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV
<7> [131.425854] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping
<7> [131.425984] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping
<7> [131.426111] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping
<7> [131.426236] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
<7> [131.426398] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [131.426902] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0
<7> [131.427009] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0
<7> [131.427147] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0
<7> [131.427280] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0
<7> [131.430844] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event
<7> [131.431161] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event
<7> [131.431511] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1
<7> [131.432356] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event
<6> [131.432425] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
<7> [131.434793] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected
<6> [131.450210] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [131.451277] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input30
<7> [131.452251] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)
<7> [131.452492] [drm:drm_client_modeset_probe]
<7> [131.452448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D
<7> [131.452674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C
<7> [131.452777] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [131.452827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [131.452866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B
<7> [131.453023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected
<7> [131.453065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E
<7> [131.453271] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [131.453291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [131.453310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [131.453518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected
<7> [131.453537] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [131.453555] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [131.453574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [131.453750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected
<7> [131.453768] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [131.453785] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [131.453793] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [131.453798] [drm:drm_client_modeset_probe] connector 105 enabled? no
<7> [131.453802] [drm:drm_client_modeset_probe] connector 109 enabled? no
<7> [131.453774] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
<7> [131.453941] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [131.453957] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [131.453958] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9
<7> [131.453961] i915 device info: graphics version: 9
<7> [131.453964] i915 device info: media version: 9
<7> [131.453967] i915 device info: display version: 9
<7> [131.453969] i915 device info: gt: 2
<7> [131.453972] i915 device info: memory-regions: 21
<7> [131.453975] i915 device info: page-sizes: 11000
<7> [131.453978] i915 device info: platform: KABYLAKE
<7> [131.453981] i915 device info: ppgtt-size: 48
<7> [131.453984] i915 device info: ppgtt-type: 2
<7> [131.453986] i915 device info: dma_mask_size: 39
<7> [131.453989] i915 device info: is_mobile: no
<7> [131.453991] i915 device info: is_lp: no
<7> [131.453986] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7> [131.453994] i915 device info: require_force_probe: no
<7> [131.453996] i915 device info: is_dgfx: no
<7> [131.453998] i915 device info: has_64bit_reloc: yes
<7> [131.454002] i915 device info: has_64k_pages: no
<7> [131.454004] i915 device info: gpu_reset_clobbers_display: no
<7> [131.454006] i915 device info: has_reset_engine: yes
<7> [131.454008] i915 device info: has_3d_pipeline: yes
<7> [131.454011] i915 device info: has_4tile: no
<7> [131.454014] i915 device info: has_flat_ccs: no
<6> [131.454014] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [131.454017] i915 device info: has_global_mocs: no
<7> [131.454020] i915 device info: has_gmd_id: no
<7> [131.454022] i915 device info: has_gt_uc: yes
<7> [131.454025] i915 device info: has_heci_pxp: no
<7> [131.454027] i915 device info: has_heci_gscfi: no
<7> [131.454029] i915 device info: has_guc_deprivilege: no
<7> [131.454032] i915 device info: has_l3_ccs_read: no
<7> [131.454034] i915 device info: has_l3_dpf: no
<7> [131.454036] i915 device info: has_llc: yes
<7> [131.454039] i915 device info: has_logical_ring_contexts: yes
<7> [131.454041] i915 device info: has_logical_ring_elsq: no
<7> [131.454044] i915 device info: has_media_ratio_mode: no
<7> [131.454046] i915 device info: has_mslice_steering: no
<7> [131.454049] i915 device info: has_oa_bpc_reporting: no
<7> [131.454051] i915 device info: has_oa_slice_contrib_limits: no
<7> [131.454054] i915 device info: has_one_eu_per_fuse_bit: no
<7> [131.454057] i915 device info: has_pxp: no
<7> [131.454060] i915 device info: has_rc6: yes
<7> [131.454063] i915 device info: has_rc6p: no
<7> [131.454065] i915 device info: has_rps: yes
<7> [131.454068] i915 device info: has_runtime_pm: yes
<7> [131.454071] i915 device info: has_snoop: no
<7> [131.454074] i915 device info: has_coherent_ggtt: yes
<7> [131.454077] i915 device info: tuning_thread_rr_after_dep: no
<7> [131.454079] i915 device info: unfenced_needs_alignment: no
<7> [131.454082] i915 device info: hws_needs_physical: no
<7> [131.454085] i915 device info: has_pooled_eu: no
<7> [131.454088] i915 device info: cursor_needs_physical: no
<7> [131.454090] i915 device info: has_cdclk_crawl: no
<7> [131.454092] i915 device info: has_cdclk_squash: no
<7> [131.454094] i915 device info: has_ddi: yes
<7> [131.454097] i915 device info: has_dp_mst: yes
<7> [131.454099] i915 device info: has_dsb: no
<7> [131.454102] i915 device info: has_fpga_dbg: yes
<7> [131.454104] i915 device info: has_gmch: no
<7> [131.454107] i915 device info: has_hotplug: yes
<7> [131.454109] i915 device info: has_hti: no
<7> [131.454112] i915 device info: has_ipc: yes
<7> [131.454114] i915 device info: has_modular_fia: no
<7> [131.454116] i915 device info: has_overlay: no
<7> [131.454119] i915 device info: has_psr: yes
<7> [131.454121] i915 device info: has_psr_hw_tracking: yes
<7> [131.454124] i915 device info: overlay_needs_physical: no
<7> [131.454126] i915 device info: supports_tv: no
<7> [131.454129] i915 device info: has_hdcp: yes
<7> [131.454131] i915 device info: has_dmc: yes
<7> [131.454133] i915 device info: has_dsc: no
<7> [131.454136] i915 device info: rawclk rate: 24000 kHz
<7> [131.454138] i915 device info: iommu: enabled
<7> [131.454141] i915 device info: available engines: 40403
<7> [131.454144] i915 device info: slice total: 1, mask=0001
<7> [131.454146] i915 device info: subslice total: 3
<7> [131.454149] i915 device info: slice0: 3 subslices, mask=00000007
<7> [131.454152] i915 device info: slice1: 0 subslices, mask=00000000
<7> [131.454155] i915 device info: slice2: 0 subslices, mask=00000000
<7> [131.454158] i915 device info: EU total: 24
<7> [131.454160] i915 device info: EU per subslice: 8
<7> [131.454162] i915 device info: has slice power gating: no
<7> [131.454165] i915 device info: has subslice power gating: no
<7> [131.454167] i915 device info: has EU power gating: yes
<6> [131.454169] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6> [131.454172] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6> [131.454175] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<7> [131.455619] [drm:drm_client_modeset_probe]
<7> [131.455863] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [131.455908] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [131.456085] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [131.456105] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [131.456124] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [131.456270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [131.456289] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [131.456307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [131.456470] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [131.456488] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [131.456496] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [131.456500] [drm:drm_client_modeset_probe] connector 105 enabled? no
<7> [131.456504] [drm:drm_client_modeset_probe] connector 109 enabled? no
<7> [131.456597] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [131.456614] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [131.456643] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [131.456667] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [131.461493] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<6> [131.462083] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
<7> [131.462334] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<6> [131.483446] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
<6> [131.483458] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<6> [131.483461] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
<6> [131.483464] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
<6> [131.483466] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
<6> [131.483469] snd_hda_codec_realtek hdaudioC0D0: inputs:
<6> [131.483471] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
<6> [131.483473] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
<6> [131.483476] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
<7> [131.510543] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [131.510697] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [131.510812] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [131.510926] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [131.511038] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [131.511151] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [131.511263] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [131.511390] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [131.511527] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<6> [131.517441] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
<6> [131.518434] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
<6> [131.526627] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
<6> [131.527289] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
<6> [131.528224] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35
<6> [131.529247] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36
<6> [131.530328] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37
<6> [131.531688] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38
<7> [132.752009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.753464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.754461] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.754771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.755339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.755629] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.758814] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [132.762445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.864501] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.872844] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [132.874261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.874391] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [132.874696] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1
<7> [132.874782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [132.874772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.875066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [132.875088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.875102] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [132.875406] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [132.875798] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.876347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.876728] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [132.889917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.890304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.890644] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.890953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.891742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.201415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.201692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.202302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.202899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.203227] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [133.211014] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [133.211227] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [133.211430] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [133.211679] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [133.211927] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [133.212175] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [133.212441] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [133.212689] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [133.212935] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [133.213799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.214292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.214570] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.214821] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.215522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.253156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.253298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.253737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.254297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.254497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E
<7> [133.254613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B
<7> [133.254728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C
<7> [133.254842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D
<7> [133.280653] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]
<7> [133.318216] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper
<6> [133.570866] [IGT] Reloading i915 as normal
<5> [133.680793] Setting dangerous option enable_guc - tainting kernel
<7> [133.722013] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K
<7> [133.722221] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=3 (guc:yes submission:no huc:yes slpc:no)
<6> [133.722364] i915 0000:00:02.0: [drm] Incompatible option enable_guc=3 - GuC submission is N/A
<7> [133.722409] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH
<7> [133.722560] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02
<7> [133.722801] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7> [133.723131] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7> [133.723306] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz
<7> [133.723984] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [133.724208] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [133.724364] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
<6> [133.724532] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6> [133.724539] i915 0000:00:02.0: vgaarb: deactivate vga console
<6> [133.725096] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7> [133.725120] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047
<7> [133.725301] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
<7> [133.725735] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2d24018
<7> [133.725909] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
<7> [133.726088] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [133.726266] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x
<7> [133.726433] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported
<7> [133.730403] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
<7> [133.730600] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [133.730773] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7> [133.730981] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
<7> [133.731159] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4
<7> [133.731306] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no
<7> [133.731519] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [133.731668] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no
<7> [133.731815] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no
<7> [133.731930] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [133.732054] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no
<7> [133.732198] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes
<7> [133.732342] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2
<7> [133.732502] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no
<7> [133.732996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [133.733188] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206
<7> [133.733400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)
<7> [133.733597] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)
<7> [133.733788] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)
<7> [133.733950] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7> [133.734145] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)
<7> [133.734334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)
<7> [133.734523] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7> [133.734721] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)
<7> [133.734883] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)
<7> [133.735077] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)
<7> [133.735265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [133.735439] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [133.735627] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7> [133.735821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7> [133.736014] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7> [133.736207] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [133.736408] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [133.736597] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4
<7> [133.736785] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [133.736974] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8
<7> [133.737161] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [133.737350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0
<7> [133.737552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [133.737792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [133.738002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO
<7> [133.738194] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [133.738887] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
<7> [133.739046] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz
<7> [133.739240] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [133.739497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.739685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.739873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [133.740076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.740310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E
<7> [133.740511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B
<7> [133.740701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C
<7> [133.740890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D
<7> [133.741117] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin
<7> [133.742003] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<6> [133.742156] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
<7> [133.742428] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV
<7> [133.742562] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us
<7> [133.742693] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
<7> [133.742789] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
<7> [133.742881] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
<7> [133.742972] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
<7> [133.743062] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
<7> [133.743153] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
<7> [133.743244] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
<7> [133.743334] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
<7> [133.744517] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.
<7> [133.745575] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
<7> [133.745782] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port A is not present
<7> [133.745953] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
<7> [133.746103] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]
<7> [133.746229] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
<7> [133.746631] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (platform default)
<7> [133.746798] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]
<7> [133.746933] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
<7> [133.747126] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present
<7> [133.747301] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port E (VBT)
<7> [133.747482] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI E/PHY E]
<7> [133.747749] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported
<7> [133.748145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled
<7> [133.748322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled
<7> [133.748516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled
<7> [133.748676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [133.748813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A
<7> [133.748950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A
<7> [133.749086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B
<7> [133.749221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B
<7> [133.749355] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B
<7> [133.749503] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C
<7> [133.749677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C
<7> [133.749814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C
<7> [133.749952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A
<7> [133.750088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A
<7> [133.750223] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI E/PHY E] hw state readout: disabled, pipe A
<7> [133.750360] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1
<7> [133.750521] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [133.750687] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [133.750826] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [133.750991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled
<7> [133.751134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled
<7> [133.751277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled
<7> [133.751426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz
<7> [133.751595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz
<7> [133.751725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz
<7> [133.751854] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0
<7> [133.751988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz
<7> [133.752119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz
<7> [133.752248] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz
<7> [133.752387] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0
<7> [133.752563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz
<7> [133.752695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz
<7> [133.752825] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz
<7> [133.752953] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0
<7> [133.753109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]
<7> [133.753243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]
<7> [133.753386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]
<7> [133.753558] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling
<7> [133.753692] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [133.753822] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [133.753950] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [133.754915] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)
<7> [133.755047] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 1000] for use by error capture
<7> [133.755159] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000]
<7> [133.755277] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0
<7> [133.755421] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global
<7> [133.756309] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0
<7> [133.756459] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0
<7> [133.756618] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0
<7> [133.759951] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7> [133.760130] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset
<7> [133.787256] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f
<7> [133.787433] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0
<7> [133.787563] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000
<7> [133.787691] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7> [133.787818] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a
<7> [133.787947] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x59120004
<7> [133.788074] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7> [133.788202] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7> [133.788329] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7> [133.788466] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7> [133.788615] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7> [133.788760] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7> [133.788888] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7> [133.789017] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<7> [133.789145] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GSC loads huc=no
<6> [133.790288] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
<6> [133.790293] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
<7> [133.797046] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6> [133.797363] i915 0000:00:02.0: [drm] HuC authenticated
<6> [133.797367] i915 0000:00:02.0: [drm] GT0: GuC submission disabled
<6> [133.797381] i915 0000:00:02.0: [drm] GT0: GuC SLPC disabled
<7> [133.805966] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV
<7> [133.806198] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping
<7> [133.806328] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping
<7> [133.806465] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping
<7> [133.806592] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
<7> [133.806738] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [133.807195] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0
<7> [133.807302] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0
<7> [133.807417] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0
<7> [133.807518] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0
<7> [133.809514] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event
<7> [133.809833] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event
<7> [133.810126] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-1
<7> [133.810856] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event
<6> [133.810904] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
<7> [133.812894] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected
<6> [133.827831] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [133.828720] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39
<7> [133.829282] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)
<7> [133.829539] [drm:drm_client_modeset_probe]
<7> [133.829484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D
<7> [133.829679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C
<7> [133.829816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B
<7> [133.829879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [133.829952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E
<7> [133.829925] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [133.830769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.830898] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
<7> [133.830966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [133.831063] i915 device info: pciid=0x5912 rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9
<7> [133.831066] i915 device info: graphics version: 9
<7> [133.831068] i915 device info: media version: 9
<7> [133.831070] i915 device info: display version: 9
<7> [133.831071] i915 device info: gt: 2
<7> [133.831073] i915 device info: memory-regions: 21
<7> [133.831074] i915 device info: page-sizes: 11000
<7> [133.831076] i915 device info: platform: KABYLAKE
<7> [133.831077] i915 device info: ppgtt-size: 48
<7> [133.831079] i915 device info: ppgtt-type: 2
<7> [133.831081] i915 device info: dma_mask_size: 39
<7> [133.831084] i915 device info: is_mobile: no
<7> [133.831086] i915 device info: is_lp: no
<7> [133.831088] i915 device info: require_force_probe: no
<7> [133.831091] i915 device info: is_dgfx: no
<7> [133.831093] i915 device info: has_64bit_reloc: yes
<7> [133.831095] i915 device info: has_64k_pages: no
<7> [133.831098] i915 device info: gpu_reset_clobbers_display: no
<7> [133.831100] i915 device info: has_reset_engine: yes
<7> [133.831102] i915 device info: has_3d_pipeline: yes
<7> [133.831104] i915 device info: has_4tile: no
<7> [133.831106] i915 device info: has_flat_ccs: no
<7> [133.831108] i915 device info: has_global_mocs: no
<7> [133.831110] i915 device info: has_gmd_id: no
<7> [133.831113] i915 device info: has_gt_uc: yes
<7> [133.831115] i915 device info: has_heci_pxp: no
<7> [133.831117] i915 device info: has_heci_gscfi: no
<7> [133.831120] i915 device info: has_guc_deprivilege: no
<7> [133.831122] i915 device info: has_l3_ccs_read: no
<7> [133.831124] i915 device info: has_l3_dpf: no
<7> [133.831127] i915 device info: has_llc: yes
<7> [133.831129] i915 device info: has_logical_ring_contexts: yes
<7> [133.831131] i915 device info: has_logical_ring_elsq: no
<7> [133.831133] i915 device info: has_media_ratio_mode: no
<7> [133.831135] i915 device info: has_mslice_steering: no
<7> [133.831138] i915 device info: has_oa_bpc_reporting: no
<7> [133.831140] i915 device info: has_oa_slice_contrib_limits: no
<7> [133.831142] i915 device info: has_one_eu_per_fuse_bit: no
<7> [133.831144] i915 device info: has_pxp: no
<7> [133.831145] i915 device info: has_rc6: yes
<7> [133.831147] i915 device info: has_rc6p: no
<7> [133.831148] i915 device info: has_rps: yes
<7> [133.831150] i915 device info: has_runtime_pm: yes
<7> [133.831151] i915 device info: has_snoop: no
<7> [133.831153] i915 device info: has_coherent_ggtt: yes
<7> [133.831155] i915 device info: tuning_thread_rr_after_dep: no
<7> [133.831156] i915 device info: unfenced_needs_alignment: no
<7> [133.831158] i915 device info: hws_needs_physical: no
<7> [133.831159] i915 device info: has_pooled_eu: no
<7> [133.831161] i915 device info: cursor_needs_physical: no
<7> [133.831162] i915 device info: has_cdclk_crawl: no
<7> [133.831164] i915 device info: has_cdclk_squash: no
<7> [133.831166] i915 device info: has_ddi: yes
<7> [133.831167] i915 device info: has_dp_mst: yes
<7> [133.831168] i915 device info: has_dsb: no
<7> [133.831170] i915 device info: has_fpga_dbg: yes
<7> [133.831172] i915 device info: has_gmch: no
<7> [133.831173] i915 device info: has_hotplug: yes
<7> [133.831175] i915 device info: has_hti: no
<7> [133.831177] i915 device info: has_ipc: yes
<7> [133.831180] i915 device info: has_modular_fia: no
<7> [133.831183] i915 device info: has_overlay: no
<7> [133.831185] i915 device info: has_psr: yes
<7> [133.831188] i915 device info: has_psr_hw_tracking: yes
<7> [133.831191] i915 device info: overlay_needs_physical: no
<7> [133.831194] i915 device info: supports_tv: no
<7> [133.831197] i915 device info: has_hdcp: yes
<7> [133.831200] i915 device info: has_dmc: yes
<7> [133.831202] i915 device info: has_dsc: no
<7> [133.831205] i915 device info: rawclk rate: 24000 kHz
<7> [133.831208] i915 device info: iommu: enabled
<7> [133.831211] i915 device info: available engines: 40403
<7> [133.831214] i915 device info: slice total: 1, mask=0001
<7> [133.831217] i915 device info: subslice total: 3
<7> [133.831220] i915 device info: slice0: 3 subslices, mask=00000007
<7> [133.831223] i915 device info: slice1: 0 subslices, mask=00000000
<7> [133.831226] i915 device info: slice2: 0 subslices, mask=00000000
<7> [133.831229] i915 device info: EU total: 24
<7> [133.831232] i915 device info: EU per subslice: 8
<7> [133.831233] i915 device info: has slice power gating: no
<7> [133.831235] i915 device info: has subslice power gating: no
<7> [133.831237] i915 device info: has EU power gating: yes
<6> [133.831239] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6> [133.831241] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6> [133.831243] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<7> [133.831388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.831585] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.831593] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.831772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [133.834938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.834945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [133.835127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.835421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.835565] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.835706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.836310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.836795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected
<7> [133.837000] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [133.837287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [133.837308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [133.837535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.838302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.838465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.838784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.839229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.839236] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.839404] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.854085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.854095] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.854289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.854513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected
<7> [133.854541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [133.854567] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [133.854586] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [133.854780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.855351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.855574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected
<7> [133.855594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [133.855611] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [133.855622] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [133.855627] [drm:drm_client_modeset_probe] connector 105 enabled? no
<7> [133.855631] [drm:drm_client_modeset_probe] connector 109 enabled? no
<7> [133.855710] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [133.855732] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [133.855762] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [133.855788] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [133.856609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.856810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.857328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.857940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.858085] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.858223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.858804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.859105] [drm:drm_client_modeset_probe]
<7> [133.859327] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [133.859380] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [133.859659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.860893] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.861055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [133.861713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.862182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.862190] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.862340] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [133.877090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.877100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [133.877271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.877509] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [133.877533] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [133.877553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [133.877715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.878747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.878891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.880461] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [133.882505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.882970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.882978] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.883126] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.897852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.897858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.897968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.898096] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [133.898112] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [133.898125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [133.898239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.898799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.898928] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [133.898942] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [133.898949] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [133.898952] [drm:drm_client_modeset_probe] connector 105 enabled? no
<7> [133.898955] [drm:drm_client_modeset_probe] connector 109 enabled? no
<7> [133.899030] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [133.899042] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [133.899221] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [133.899234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [133.899436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.900337] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [133.900355] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [133.900437] [drm:drm_client_modeset_probe]
<7> [133.900598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.900757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [133.901415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.901913] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.901919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.902038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [133.916206] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.916212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [133.916320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.916453] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [133.916588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [133.916602] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<6> [133.916697] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
<7> [133.916712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.916855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.917176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.917739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.917746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.917846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.917962] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [133.918130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.918254] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.918258] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.918358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.921218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.921223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.921329] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [133.921343] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [133.921359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [133.921701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.921804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [133.922087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.922204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.922208] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.922309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [133.926326] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.926332] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [133.926466] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [133.926481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [133.926494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [133.926808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.926910] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.927193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.927310] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.927314] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.927440] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.930262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.930267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.930379] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [133.930393] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [133.930406] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [133.930535] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [133.930547] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [133.930551] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [133.930554] [drm:drm_client_modeset_probe] connector 105 enabled? no
<7> [133.930556] [drm:drm_client_modeset_probe] connector 109 enabled? no
<7> [133.930625] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [133.930635] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [133.930654] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [133.930667] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [133.930710] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [133.930726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [133.931041] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [133.933897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [133.933912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [133.934233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.934335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [133.934630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.934747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.934751] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.934893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [133.937858] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.937864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [133.937969] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [133.938507] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [133.938521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [133.938851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.938983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.939306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.939436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.939440] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.939580] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<6> [133.940727] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
<6> [133.940738] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<6> [133.940741] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
<6> [133.940744] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
<6> [133.940746] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
<6> [133.940748] snd_hda_codec_realtek hdaudioC0D0: inputs:
<6> [133.940751] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
<6> [133.940753] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
<6> [133.940755] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
<7> [133.942598] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.942606] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.942760] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [133.943451] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [133.943471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [133.943652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [133.944148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [133.944162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [133.944510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.944615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [133.944927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [133.945093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.945099] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.945242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [133.948184] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [133.948189] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [133.948296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [133.948325] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]
<7> [133.948337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [133.948697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.948843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.949143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.949301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.949307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.949467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.952454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.952459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.952564] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected
<7> [133.952592] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]
<7> [133.952605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [133.952731] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected
<7> [133.968099] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [133.968239] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [133.968354] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [133.968482] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [133.968625] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [133.968739] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [133.968852] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [133.968965] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [133.969077] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<6> [133.978600] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40
<6> [133.979630] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41
<6> [133.980518] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42
<6> [133.981298] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input43
<6> [133.982600] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input44
<6> [133.983469] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input45
<6> [133.984204] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input46
<6> [133.984935] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input47
<7> [134.976301] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [134.977302] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [134.978002] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [135.082472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.083825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.084569] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.085247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.086443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.087977] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [135.090671] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [135.094407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [135.213725] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [135.237415] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [135.239025] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [135.239054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [135.239264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.239596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [135.240136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [135.240723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [135.241090] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [135.241593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [135.241728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [135.242032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [135.242152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [135.242157] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [135.242258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [135.245113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [135.245119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [135.245226] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1
<7> [135.245246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]
<7> [135.245581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [135.245696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [135.245985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [135.246146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.246150] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [135.246252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [135.249119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [135.249125] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [135.249232] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] Same epoch counter 1
<7> [135.249248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]
<7> [135.249548] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:109:DP-1] Same epoch counter 1
<7> [135.253655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.253816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.253945] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.254069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.254637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.545190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.545392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [135.545909] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [135.546470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [135.546761] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10
<7> [135.553396] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [135.553554] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [135.553678] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [135.553800] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [135.553922] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [135.554043] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [135.554164] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [135.554286] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [135.554455] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [135.555030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [135.555358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [135.555543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [135.555701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [135.556275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [135.593151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [135.593291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [135.593731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [135.594295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [135.594556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E
<7> [135.594723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B
<7> [135.594886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C
<7> [135.595048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D
<7> [135.615617] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]
<7> [135.648665] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper
<6> [135.874914] [IGT] i915_pm_rpm: exiting, ret=0
|