igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.3-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gf9d49501e (x86_64) (Linux: 6.3.0-rc2-linus-v6.3-rc2-geeac8ede1755+ x86_64)
Out	Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: yes Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe6/0x240 [i915] pci_pm_runtime_suspend+0x5d/0x1a0 __rpm_callback+0x3f/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x115/0x6b0 pm_runtime_work+0x9f/0xb0 Wakeref count: 0 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_dmc_debugfs_status_show+0x42/0x350 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xce/0x310 ksys_read+0x64/0xe0 do_syscall_64+0x3f/0x90 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_dmc_debugfs_status_show+0x22a/0x350 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x55/0x80 vfs_read+0xce/0x310 Wakeref count: 0 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xb26/0xe40 [i915] intel_atomic_commit+0x380/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 Subtest module-reload: SUCCESS (25.585s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (25.585s)
Dmesg	<6> [156.269162] [IGT] i915_pm_rpm: executing <7> [156.274560] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [156.275030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [156.275049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [156.275387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [156.275571] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.275701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.276295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.276620] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [156.276713] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [156.276726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [156.276899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.277408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [156.277914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.278495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [156.279752] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [156.280893] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [156.281712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [156.281932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [156.282056] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.282209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.282795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.282923] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [156.282989] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [156.283002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [156.283115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.284870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.284981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [156.286131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.286691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.286697] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [156.286802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [156.315237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.315242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [156.315364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.315487] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [156.319479] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [156.319495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [156.319624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.320105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.320290] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [156.320878] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [156.320891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [156.321008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.321502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [156.321980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.322625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [156.323766] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [156.324582] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [156.325211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [156.325357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [156.325483] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.325605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.326204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.326333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [156.326858] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [156.326872] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [156.326989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.329124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.329239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [156.330485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.331012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.331017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [156.331120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [156.359498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.359503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [156.359613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.359741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [156.360134] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [156.360147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [156.360274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.360781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.360921] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [156.360948] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [156.360961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [156.361073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.361569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [156.362076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.362651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [156.363821] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [156.364928] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [156.365745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [156.365889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [156.366015] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.366138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.366755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.366926] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [156.366954] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [156.366967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [156.367079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.368222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.368342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [156.369019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.369522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.369529] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [156.369698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [156.398111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.398116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [156.398276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.398450] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [166.522377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [166.527853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [167.459812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [167.469052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [167.469777] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [167.470226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.470704] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [167.471424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.472263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [167.473133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [167.473906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [167.474341] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [167.476972] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [167.501422] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [167.507598] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [167.507821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.508403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [167.508985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [167.509615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [167.511581] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [167.512342] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [167.512916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [167.513337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [167.513543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [167.513735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [167.514406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.514578] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [167.514597] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [167.514711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.516451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [167.516564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [167.517258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [167.517751] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [167.517757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [167.517864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [167.542965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [167.542970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [167.543076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.543445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [167.543472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [167.543589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.544048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.544203] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [167.544444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [167.545200] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [167.548481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [167.572959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [167.578292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [167.578466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [167.579721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [167.582245] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [167.606486] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [167.615021] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [167.615261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.615886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [167.616487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [167.617097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [167.618686] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [167.619632] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [167.620381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [167.620725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [167.621027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [167.621348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [167.622111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.622451] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [167.622493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [167.622769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.624056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [167.624337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [167.625236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [167.625837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [167.625850] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [167.626101] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [167.651981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [167.651989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [167.652188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.652371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [167.652403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [167.652564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.653071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.653265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [167.653286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [167.653445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.653952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [167.654477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [167.655045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [167.656238] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [167.656942] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [167.657470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [167.657651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [167.657806] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [167.657955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [167.658572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.658734] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [167.658753] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [167.658894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.659991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [167.660123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [167.660844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [167.661349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [167.661356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [167.661485] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [167.689918] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [167.689923] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [167.690031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.690160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [167.690188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [167.693076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [167.782026] [IGT] i915_pm_rpm: starting subtest module-reload <7> [167.867127] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [167.873055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [167.873551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [167.873645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.874160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [167.874694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [167.875295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [167.875542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [167.875747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [167.875921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [167.876068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [167.876297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [167.876325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [167.877552] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [167.878389] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [167.879073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [167.879344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [167.879795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [167.879956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [167.880382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [167.880578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [167.880586] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [167.880741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [167.885051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [167.885071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [167.885206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [167.911595] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [167.949516] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [168.176659] [IGT] Reloading i915 w/o display <7> [168.396085] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [168.396335] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [168.396494] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [168.396602] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [168.396796] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [168.397049] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [168.397215] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [168.397834] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [168.397952] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [168.398063] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [168.398186] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [168.398195] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [168.398424] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [168.398440] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [168.398574] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [168.398857] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [168.399015] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [168.399150] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [168.399317] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [168.399463] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [168.403516] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [168.403663] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [168.403800] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [168.403939] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [168.404077] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [168.404200] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [168.404321] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [168.404420] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [168.404521] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [168.404619] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [168.404718] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [168.404818] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [168.404916] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [168.405015] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [168.405767] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [168.405930] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [168.406079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [168.406294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [168.406458] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [168.406607] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [168.406758] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [168.406903] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [168.407048] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [168.407223] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [168.407408] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [168.407554] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [168.407696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [168.407840] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [168.407985] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [168.408130] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [168.408322] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [168.408510] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [168.408660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [168.408803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [168.408944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [168.409086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [168.409238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [168.409413] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [168.409594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [168.409774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [168.409952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [168.410101] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [168.410744] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [168.410890] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [168.411048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [168.411296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.411449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [168.411591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [168.411745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [168.411919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [168.412063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [168.412241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [168.412403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [168.412588] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [168.413567] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [168.413753] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [168.414241] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [168.414432] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [168.414578] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [168.414678] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [168.414776] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [168.414873] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [168.414969] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [168.415065] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [168.415161] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [168.415304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [168.416657] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [168.418133] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [168.418430] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT) <7> [168.418653] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [168.421529] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [168.421683] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [168.421835] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [168.421985] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [168.422142] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [168.422360] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [168.422520] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [168.422664] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [168.422805] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [168.422946] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [168.423088] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [168.423332] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [168.423548] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [168.423679] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [168.423828] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [168.423974] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [168.424104] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [168.424338] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [168.424637] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [168.424794] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [168.425006] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [168.425159] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [168.425473] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [168.425624] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [168.645184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.656184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.667184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.678184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.689183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.700184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.711186] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.722183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.733183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.744184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.755184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.766183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.777183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.788185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.799185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.810185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.821183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.832185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.843183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.854183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.865183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.876186] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.887182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.898183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.909184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.920185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.931183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.942183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.953184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.964183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.975182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.986187] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [168.986369] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [168.986389] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [168.986447] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [168.986643] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [168.986831] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT) <7> [168.986989] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [168.987369] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [168.987545] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT) <7> [168.987714] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [168.987971] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [168.988110] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [168.988251] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT) <7> [168.988466] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [168.988611] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [168.988948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [168.989113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [168.989357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [168.989520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [168.989665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [168.989809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [168.989953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [168.990097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [168.990251] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [168.990439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [168.990617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [168.990761] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [168.990905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [168.991043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [168.991207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [168.991426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [168.991578] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [168.991729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [168.991868] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [168.992004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [168.992152] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [168.992364] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [168.992573] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [168.992722] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [168.992894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [168.993044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [168.993231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [168.993418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [168.993557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [168.993694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [168.993832] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [168.993974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [168.994111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [168.994295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [168.994505] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [168.994648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [168.994789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [168.994928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [168.995102] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [168.995356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [168.995549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [168.995692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [168.995836] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [168.995978] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [168.996114] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [168.996298] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [168.996542] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 1000] for use by error capture <7> [168.996656] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000] <7> [168.996785] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [168.996925] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [168.997873] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [168.998013] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [168.998149] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [169.008593] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [169.008847] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [169.008985] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [169.009120] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [169.009304] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [169.009476] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [169.010093] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [169.010249] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [169.010389] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [169.010497] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [169.013279] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [169.014093] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [169.014404] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [169.014950] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [169.015288] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [169.015333] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [169.017221] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [169.034807] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [169.038456] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [169.039792] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [169.040108] [drm:drm_client_modeset_probe] <7> [169.040070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [169.040390] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [169.040314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [169.040431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.040579] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [169.040528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [169.040809] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [169.040824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [169.040741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [169.040838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.040978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [169.040991] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [169.041004] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [169.041017] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.041153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [169.041166] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [169.041197] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [169.041204] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [169.041207] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [169.041211] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [169.041311] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [169.041331] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [169.041361] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [169.041390] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [169.041482] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [169.041692] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [169.041698] i915 device info: graphics version: 9 <7> [169.041701] i915 device info: media version: 9 <7> [169.041705] i915 device info: display version: 9 <7> [169.041708] i915 device info: gt: 2 <7> [169.041712] i915 device info: memory-regions: 21 <7> [169.041716] i915 device info: page-sizes: 11000 <7> [169.041719] i915 device info: platform: KABYLAKE <7> [169.041722] i915 device info: ppgtt-size: 48 <7> [169.041726] i915 device info: ppgtt-type: 2 <7> [169.041729] i915 device info: dma_mask_size: 39 <7> [169.041733] i915 device info: is_mobile: no <7> [169.041737] i915 device info: is_lp: no <7> [169.041740] i915 device info: require_force_probe: no <7> [169.041743] i915 device info: is_dgfx: no <7> [169.041746] i915 device info: has_64bit_reloc: yes <7> [169.041750] i915 device info: has_64k_pages: no <7> [169.041754] i915 device info: gpu_reset_clobbers_display: no <7> [169.041757] i915 device info: has_reset_engine: yes <7> [169.041760] i915 device info: has_3d_pipeline: yes <7> [169.041764] i915 device info: has_4tile: no <7> [169.041767] i915 device info: has_flat_ccs: no <7> [169.041771] i915 device info: has_global_mocs: no <7> [169.041774] i915 device info: has_gmd_id: no <7> [169.041777] i915 device info: has_gt_uc: yes <7> [169.041781] i915 device info: has_heci_pxp: no <7> [169.041784] i915 device info: has_heci_gscfi: no <7> [169.041788] i915 device info: has_guc_deprivilege: no <7> [169.041791] i915 device info: has_l3_ccs_read: no <7> [169.041795] i915 device info: has_l3_dpf: no <7> [169.041797] i915 device info: has_llc: yes <7> [169.041801] i915 device info: has_logical_ring_contexts: yes <7> [169.041804] i915 device info: has_logical_ring_elsq: no <7> [169.041807] i915 device info: has_media_ratio_mode: no <7> [169.041811] i915 device info: has_mslice_steering: no <7> [169.041814] i915 device info: has_oa_bpc_reporting: no <7> [169.041818] i915 device info: has_oa_slice_contrib_limits: no <7> [169.041821] i915 device info: has_one_eu_per_fuse_bit: no <7> [169.041825] i915 device info: has_pxp: no <7> [169.041828] i915 device info: has_rc6: yes <7> [169.041831] i915 device info: has_rc6p: no <7> [169.041834] i915 device info: has_rps: yes <7> [169.041838] i915 device info: has_runtime_pm: yes <7> [169.041841] i915 device info: has_snoop: no <7> [169.041845] i915 device info: has_coherent_ggtt: yes <7> [169.041848] i915 device info: tuning_thread_rr_after_dep: no <7> [169.041852] i915 device info: unfenced_needs_alignment: no <7> [169.041855] i915 device info: hws_needs_physical: no <7> [169.041859] i915 device info: has_pooled_eu: no <7> [169.041862] i915 device info: cursor_needs_physical: no <7> [169.041866] i915 device info: has_cdclk_crawl: no <7> [169.041869] i915 device info: has_cdclk_squash: no <7> [169.041873] i915 device info: has_ddi: yes <7> [169.041876] i915 device info: has_dp_mst: yes <7> [169.041880] i915 device info: has_dsb: no <7> [169.041883] i915 device info: has_fpga_dbg: yes <7> [169.041887] i915 device info: has_gmch: no <7> [169.041890] i915 device info: has_hotplug: yes <7> [169.041893] i915 device info: has_hti: no <7> [169.041897] i915 device info: has_ipc: yes <7> [169.041900] i915 device info: has_modular_fia: no <7> [169.041904] i915 device info: has_overlay: no <7> [169.041907] i915 device info: has_psr: yes <7> [169.041911] i915 device info: has_psr_hw_tracking: yes <7> [169.041914] i915 device info: overlay_needs_physical: no <7> [169.041917] i915 device info: supports_tv: no <7> [169.041921] i915 device info: has_hdcp: yes <7> [169.041924] i915 device info: has_dmc: yes <7> [169.041927] i915 device info: has_dsc: no <7> [169.041930] i915 device info: rawclk rate: 24000 kHz <7> [169.041934] i915 device info: iommu: enabled <7> [169.041937] i915 device info: available engines: 40403 <7> [169.041941] i915 device info: slice total: 1, mask=0001 <7> [169.041945] i915 device info: subslice total: 3 <7> [169.041949] i915 device info: slice0: 3 subslices, mask=00000007 <7> [169.041953] i915 device info: slice1: 0 subslices, mask=00000000 <7> [169.041956] i915 device info: slice2: 0 subslices, mask=00000000 <7> [169.041959] i915 device info: EU total: 24 <7> [169.041962] i915 device info: EU per subslice: 8 <7> [169.041965] i915 device info: has slice power gating: no <7> [169.041969] i915 device info: has subslice power gating: no <7> [169.041972] i915 device info: has EU power gating: yes <6> [169.041976] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [169.041979] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [169.041983] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [169.042589] [drm:drm_client_modeset_probe] <7> [169.042854] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [169.042902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.043089] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [169.043111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [169.043132] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.043318] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [169.043339] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [169.043359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.043523] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [169.043544] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [169.043554] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [169.043560] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [169.043566] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [169.043679] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [169.043700] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [169.043732] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [169.043760] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [169.047522] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [169.194539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [169.194842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [169.194982] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [169.195108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [169.195792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.092930] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.100972] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.125417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.134131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.134471] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [180.134786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.134835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.135300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [180.135650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.136147] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [180.136667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.143556] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.316246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.324898] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.325658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.326049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.326709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.327451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.327985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [180.328318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [180.328713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [180.329018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [180.357504] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [180.414257] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [180.672739] [IGT] Reloading i915 as normal <7> [180.824472] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [180.824675] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [180.824833] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [180.824940] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [180.825133] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [180.825445] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [180.825600] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [180.826264] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [180.826383] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [180.826499] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [180.826614] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [180.826620] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [180.826837] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [180.826853] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [180.826994] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [180.827368] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [180.827538] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [180.827718] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [180.827862] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [180.828005] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [180.832156] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [180.832317] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [180.832452] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [180.832587] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [180.832723] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [180.832836] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [180.832956] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [180.833056] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [180.833156] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [180.833269] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [180.833428] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [180.833527] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [180.833661] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [180.833760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [180.834137] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [180.834308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [180.834507] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [180.834653] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [180.834798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [180.834944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [180.835089] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [180.835246] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [180.835442] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [180.835588] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [180.835733] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [180.835879] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [180.836021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [180.836162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [180.836382] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [180.836580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [180.836723] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [180.836868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [180.837030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [180.837263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [180.837483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [180.837634] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [180.837775] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [180.837917] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [180.838060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [180.838280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [180.838439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [180.838585] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [180.839153] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [180.839307] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [180.839516] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [180.839700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.839842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.839984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [180.840138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.840384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [180.840549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [180.840694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [180.840837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [180.841011] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [180.841928] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [180.842234] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [180.842504] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [180.842647] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [180.842786] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [180.842886] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [180.842983] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [180.843079] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [180.843208] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [180.843322] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [180.843435] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [180.843531] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [180.845087] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available. <7> [180.845972] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [180.846183] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT) <7> [180.846388] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [180.849153] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [180.849344] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [180.849488] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [180.849630] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [180.849778] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [180.849921] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [180.850061] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [180.850256] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [180.850416] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [180.850557] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [180.850699] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [180.850874] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [180.851073] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [180.851260] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [180.851404] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [180.851534] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [180.851698] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [180.851899] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [180.852219] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [180.852435] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [180.852649] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [180.852828] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [180.853022] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [180.853204] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [181.069183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.080183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.091184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.102185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.113183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.124183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.135184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.146185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.157182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.168183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.179184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.190185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.201183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.212183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.223183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.234185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.245182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.256183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.267183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.278185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.289181] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.300182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.311183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.322185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.333183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.344182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.355183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.366185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.377182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.388183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.399183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.410184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff) <7> [181.410367] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [181.410388] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [181.410445] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [181.410645] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [181.410829] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT) <7> [181.410986] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [181.411427] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [181.411576] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT) <7> [181.411777] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [181.412104] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [181.412311] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [181.412452] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT) <7> [181.412669] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present <7> [181.412811] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present <7> [181.413149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [181.413388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [181.413552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [181.413697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [181.413841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [181.413986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [181.414130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [181.414336] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [181.414493] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [181.414638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [181.414784] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [181.414942] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [181.415088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [181.415291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [181.415497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [181.415655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [181.415863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [181.416012] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [181.416187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [181.416382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [181.416530] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [181.416677] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [181.416824] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [181.416970] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [181.417141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [181.417358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [181.417518] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [181.417657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [181.417797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [181.417933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [181.418071] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [181.418272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [181.418425] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [181.418563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [181.418700] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [181.418856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [181.418995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [181.419132] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [181.419336] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [181.419600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [181.419793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [181.419953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [181.420126] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [181.420329] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.420481] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.420616] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.420780] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 1000] for use by error capture <7> [181.420895] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000] <7> [181.421025] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [181.421178] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [181.422084] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [181.422306] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [181.422443] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [181.433205] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [181.433455] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [181.433594] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [181.433728] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [181.433862] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [181.434013] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [181.434644] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [181.434795] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [181.434938] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [181.435049] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [181.438933] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [181.439676] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [181.439975] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [181.440640] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [181.440946] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [181.440989] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [181.443081] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [181.456149] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [181.458472] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [181.459090] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [181.459354] [drm:drm_client_modeset_probe] <7> [181.459619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [181.459658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.459835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [181.460072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [181.460302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [181.460513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [181.460773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.461055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.461236] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.461262] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [181.461472] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [181.461477] i915 device info: graphics version: 9 <7> [181.461481] i915 device info: media version: 9 <7> [181.461484] i915 device info: display version: 9 <7> [181.461487] i915 device info: gt: 2 <7> [181.461491] i915 device info: memory-regions: 21 <7> [181.461423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.461494] i915 device info: page-sizes: 11000 <7> [181.461498] i915 device info: platform: KABYLAKE <7> [181.461501] i915 device info: ppgtt-size: 48 <7> [181.461504] i915 device info: ppgtt-type: 2 <7> [181.461507] i915 device info: dma_mask_size: 39 <7> [181.461510] i915 device info: is_mobile: no <7> [181.461513] i915 device info: is_lp: no <7> [181.461516] i915 device info: require_force_probe: no <7> [181.461519] i915 device info: is_dgfx: no <7> [181.461522] i915 device info: has_64bit_reloc: yes <7> [181.461525] i915 device info: has_64k_pages: no <7> [181.461528] i915 device info: gpu_reset_clobbers_display: no <7> [181.461531] i915 device info: has_reset_engine: yes <7> [181.461534] i915 device info: has_3d_pipeline: yes <7> [181.461536] i915 device info: has_4tile: no <7> [181.461539] i915 device info: has_flat_ccs: no <7> [181.461542] i915 device info: has_global_mocs: no <7> [181.461544] i915 device info: has_gmd_id: no <7> [181.461547] i915 device info: has_gt_uc: yes <7> [181.461550] i915 device info: has_heci_pxp: no <7> [181.461553] i915 device info: has_heci_gscfi: no <7> [181.461556] i915 device info: has_guc_deprivilege: no <7> [181.461559] i915 device info: has_l3_ccs_read: no <7> [181.461561] i915 device info: has_l3_dpf: no <7> [181.461564] i915 device info: has_llc: yes <7> [181.461580] i915 device info: has_logical_ring_contexts: yes <7> [181.461583] i915 device info: has_logical_ring_elsq: no <7> [181.461587] i915 device info: has_media_ratio_mode: no <7> [181.461590] i915 device info: has_mslice_steering: no <7> [181.461594] i915 device info: has_oa_bpc_reporting: no <7> [181.461597] i915 device info: has_oa_slice_contrib_limits: no <7> [181.461600] i915 device info: has_one_eu_per_fuse_bit: no <7> [181.461604] i915 device info: has_pxp: no <7> [181.461607] i915 device info: has_rc6: yes <7> [181.461610] i915 device info: has_rc6p: no <7> [181.461614] i915 device info: has_rps: yes <7> [181.461617] i915 device info: has_runtime_pm: yes <7> [181.461621] i915 device info: has_snoop: no <7> [181.461624] i915 device info: has_coherent_ggtt: yes <7> [181.461627] i915 device info: tuning_thread_rr_after_dep: no <7> [181.461631] i915 device info: unfenced_needs_alignment: no <7> [181.461634] i915 device info: hws_needs_physical: no <7> [181.461638] i915 device info: has_pooled_eu: no <7> [181.461641] i915 device info: cursor_needs_physical: no <7> [181.461644] i915 device info: has_cdclk_crawl: no <7> [181.461648] i915 device info: has_cdclk_squash: no <7> [181.461651] i915 device info: has_ddi: yes <7> [181.461654] i915 device info: has_dp_mst: yes <7> [181.461658] i915 device info: has_dsb: no <7> [181.461661] i915 device info: has_fpga_dbg: yes <7> [181.461665] i915 device info: has_gmch: no <7> [181.461668] i915 device info: has_hotplug: yes <7> [181.461671] i915 device info: has_hti: no <7> [181.461675] i915 device info: has_ipc: yes <7> [181.461678] i915 device info: has_modular_fia: no <7> [181.461681] i915 device info: has_overlay: no <7> [181.461684] i915 device info: has_psr: yes <7> [181.461688] i915 device info: has_psr_hw_tracking: yes <7> [181.461691] i915 device info: overlay_needs_physical: no <7> [181.461694] i915 device info: supports_tv: no <7> [181.461697] i915 device info: has_hdcp: yes <7> [181.461701] i915 device info: has_dmc: yes <7> [181.461704] i915 device info: has_dsc: no <7> [181.461707] i915 device info: rawclk rate: 24000 kHz <7> [181.461711] i915 device info: iommu: enabled <7> [181.461715] i915 device info: available engines: 40403 <7> [181.461719] i915 device info: slice total: 1, mask=0001 <7> [181.461723] i915 device info: subslice total: 3 <7> [181.461726] i915 device info: slice0: 3 subslices, mask=00000007 <7> [181.461730] i915 device info: slice1: 0 subslices, mask=00000000 <7> [181.461734] i915 device info: slice2: 0 subslices, mask=00000000 <7> [181.461738] i915 device info: EU total: 24 <7> [181.461741] i915 device info: EU per subslice: 8 <7> [181.461745] i915 device info: has slice power gating: no <7> [181.461748] i915 device info: has subslice power gating: no <7> [181.461752] i915 device info: has EU power gating: yes <6> [181.461755] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [181.461759] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [181.461763] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [181.462051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.462597] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [181.462863] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [181.462887] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [181.462909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.463187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.463779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.464379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.464937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.467132] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.467886] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.468505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.468766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.468985] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.469219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.469904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.470141] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [181.470205] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [181.470228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [181.470250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.470459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.471897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.472103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.472892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.473410] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.473420] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.473582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.504788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.504797] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.504956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.505113] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [181.505130] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [181.505143] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [181.505154] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [181.505157] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [181.505160] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [181.505349] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [181.505371] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [181.505394] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [181.505426] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [181.506443] [drm:drm_client_modeset_probe] <7> [181.506640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [181.506677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.506877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.507509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.507657] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [181.507673] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [181.507686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.507804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.508289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.508778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.509378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.510891] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.512054] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.512202] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [181.512723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.512991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.513123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.513295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.513896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.514074] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [181.514093] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [181.514107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.514279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.515543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.515677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.516468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.516925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.516932] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.517045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.547115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.547123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.547293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.547433] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [181.547449] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [181.547456] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [181.547460] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [181.547463] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [181.547547] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [181.547561] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [181.547588] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [181.547606] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [181.547607] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [181.547659] [drm:drm_client_modeset_probe] <7> [181.547624] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.547883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.548585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.548721] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [181.548741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [181.548756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.548925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.549410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.549557] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [181.549572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [181.549586] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.549703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.550162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.550678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.551290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.552434] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.553546] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.554371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.554520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.554646] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.554767] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.555390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.555568] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [181.555583] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [181.555596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.555710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.556808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.556927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.557624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.558086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.558091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.558267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.588345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.588364] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.588473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.588601] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [181.588615] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [181.588619] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [181.588622] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [181.588625] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [181.588646] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [181.588656] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [181.588672] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [181.588686] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [181.588749] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [181.588767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.588903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.589411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.589927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.590530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.591771] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.592937] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.593755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.593995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.594125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.594287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.594874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.595001] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [181.595078] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [181.595091] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.595242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.596584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.596694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.597470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.597916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.597921] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.598024] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.622041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.622046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.622154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.622322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [181.625219] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [181.625248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.625367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.625819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.625945] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [181.626533] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [181.626547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.626662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.627197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.627690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.628260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.629436] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.630535] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.631352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.631506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.631630] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.631749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.632331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.632502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [181.633037] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [181.633050] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.633165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.634327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.634433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.635100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.635610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.635614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.635731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.660806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.660810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.660917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.661042] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [181.661507] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [181.661521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.661637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.662091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.662311] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [181.662354] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [181.662368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.662493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.662944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.663489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.664036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.665185] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.666161] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.666993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.667138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.667293] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.667449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.668032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.668158] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [181.668210] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [181.668236] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.668349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.669500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.669605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.670344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.670786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.670790] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.670893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.696009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.696014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.696122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.696258] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [192.739463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.747901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.772327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.781877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.782808] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [192.783547] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [192.784006] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [192.784469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.787960] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.789610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.814047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.820327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.820564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.821319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.821704] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.821740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.821937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.822523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.823105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.823676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.825338] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.826089] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.826662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.827035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.827261] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.827452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.828107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.828323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.828348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.828528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.830087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.830276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.831227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.831735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.831743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.831909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.856535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.856540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.856657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.856797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.856821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.856944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.857416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.857554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.857570] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.857692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.858156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.858683] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.859247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.860441] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.861539] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.862211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.862359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.862497] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.862617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.863229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.863417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.863432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.863545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.864718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.864824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.865539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.865995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.866000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.866103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.891769] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.891774] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.891883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.892013] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.892030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.896215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [193.081065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [193.085905] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [193.086580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [193.086729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [193.086887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [193.087741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [193.088339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [193.088559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [193.088703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [193.088845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [193.088987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [193.089164] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [193.089220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [193.090399] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [193.091212] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [193.092027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [193.092271] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [193.092769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [193.092929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [193.093367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [193.093561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [193.093570] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [193.093728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [193.097873] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [193.097879] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [193.097992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [193.123353] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [193.158303] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [193.367769] [IGT] i915_pm_rpm: exiting, ret=0

<6> [156.269162] [IGT] i915_pm_rpm: executing

<7> [156.274560] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [156.275030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [156.275049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [156.275387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [156.275571] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.275701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.276295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.276620] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [156.276713] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [156.276726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [156.276899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.277408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [156.277914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.278495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [156.279752] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [156.280893] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [156.281712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [156.281932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [156.282056] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.282209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.282795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.282923] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [156.282989] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [156.283002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [156.283115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.284870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.284981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [156.286131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.286691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.286697] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [156.286802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [156.315237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.315242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [156.315364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.315487] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [156.319479] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [156.319495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [156.319624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.320105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.320290] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [156.320878] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [156.320891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [156.321008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.321502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [156.321980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.322625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [156.323766] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [156.324582] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [156.325211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [156.325357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [156.325483] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.325605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.326204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.326333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [156.326858] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [156.326872] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [156.326989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.329124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.329239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [156.330485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.331012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.331017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [156.331120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [156.359498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.359503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [156.359613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.359741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [156.360134] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [156.360147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [156.360274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.360781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.360921] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [156.360948] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [156.360961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [156.361073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.361569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [156.362076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.362651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [156.363821] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [156.364928] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [156.365745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [156.365889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [156.366015] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.366138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.366755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.366926] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [156.366954] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [156.366967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [156.367079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.368222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.368342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [156.369019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.369522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.369529] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [156.369698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [156.398111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.398116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [156.398276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.398450] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [166.522377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [166.527853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [167.459812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [167.469052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [167.469777] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [167.470226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.470704] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [167.471424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.472263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [167.473133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [167.473906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [167.474341] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [167.476972] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [167.501422] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [167.507598] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [167.507821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.508403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [167.508985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [167.509615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [167.511581] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [167.512342] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [167.512916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [167.513337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [167.513543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [167.513735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [167.514406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.514578] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [167.514597] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [167.514711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.516451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [167.516564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [167.517258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [167.517751] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [167.517757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [167.517864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [167.542965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [167.542970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [167.543076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.543445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [167.543472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [167.543589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.544048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.544203] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [167.544444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [167.545200] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [167.548481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [167.572959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [167.578292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [167.578466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [167.579721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [167.582245] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [167.606486] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [167.615021] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [167.615261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.615886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [167.616487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [167.617097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [167.618686] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [167.619632] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [167.620381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [167.620725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [167.621027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [167.621348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [167.622111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.622451] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [167.622493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [167.622769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.624056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [167.624337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [167.625236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [167.625837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [167.625850] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [167.626101] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [167.651981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [167.651989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [167.652188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.652371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [167.652403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [167.652564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.653071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.653265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [167.653286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [167.653445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.653952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [167.654477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [167.655045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [167.656238] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [167.656942] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [167.657470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [167.657651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [167.657806] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [167.657955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [167.658572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.658734] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [167.658753] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [167.658894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.659991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [167.660123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [167.660844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [167.661349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [167.661356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [167.661485] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [167.689918] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [167.689923] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [167.690031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.690160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [167.690188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [167.693076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [167.782026] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [167.867127] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [167.873055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [167.873551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [167.873645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.874160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [167.874694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [167.875295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [167.875542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [167.875747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [167.875921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [167.876068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [167.876297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [167.876325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [167.877552] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [167.878389] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [167.879073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [167.879344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [167.879795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [167.879956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [167.880382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [167.880578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [167.880586] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [167.880741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [167.885051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [167.885071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [167.885206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [167.911595] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [167.949516] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [168.176659] [IGT] Reloading i915 w/o display

<7> [168.396085] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [168.396335] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [168.396494] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [168.396602] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [168.396796] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [168.397049] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [168.397215] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [168.397834] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [168.397952] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [168.398063] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [168.398186] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [168.398195] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [168.398424] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [168.398440] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [168.398574] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [168.398857] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [168.399015] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [168.399150] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [168.399317] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [168.399463] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [168.403516] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [168.403663] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [168.403800] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [168.403939] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [168.404077] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [168.404200] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [168.404321] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [168.404420] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [168.404521] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [168.404619] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [168.404718] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [168.404818] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [168.404916] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [168.405015] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [168.405767] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [168.405930] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [168.406079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [168.406294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [168.406458] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [168.406607] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [168.406758] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [168.406903] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [168.407048] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [168.407223] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [168.407408] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [168.407554] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [168.407696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [168.407840] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [168.407985] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [168.408130] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [168.408322] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [168.408510] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [168.408660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [168.408803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [168.408944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [168.409086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [168.409238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [168.409413] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [168.409594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [168.409774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [168.409952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [168.410101] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [168.410744] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [168.410890] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [168.411048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [168.411296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.411449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [168.411591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [168.411745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [168.411919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [168.412063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [168.412241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [168.412403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [168.412588] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [168.413567] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [168.413753] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [168.414241] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [168.414432] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [168.414578] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [168.414678] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [168.414776] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [168.414873] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [168.414969] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [168.415065] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [168.415161] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [168.415304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [168.416657] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [168.418133] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [168.418430] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)

<7> [168.418653] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [168.421529] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [168.421683] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [168.421835] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [168.421985] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [168.422142] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [168.422360] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [168.422520] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [168.422664] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [168.422805] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [168.422946] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [168.423088] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [168.423332] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [168.423548] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [168.423679] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [168.423828] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [168.423974] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [168.424104] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [168.424338] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [168.424637] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [168.424794] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [168.425006] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [168.425159] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [168.425473] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [168.425624] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [168.645184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.656184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.667184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.678184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.689183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.700184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.711186] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.722183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.733183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.744184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.755184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.766183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.777183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.788185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.799185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.810185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.821183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.832185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.843183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.854183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.865183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.876186] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.887182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.898183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.909184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.920185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.931183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.942183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.953184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.964183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.975182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.986187] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [168.986369] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [168.986389] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [168.986447] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [168.986643] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [168.986831] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT)

<7> [168.986989] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [168.987369] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [168.987545] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT)

<7> [168.987714] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [168.987971] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [168.988110] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [168.988251] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)

<7> [168.988466] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [168.988611] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [168.988948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [168.989113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [168.989357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [168.989520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [168.989665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [168.989809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [168.989953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [168.990097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [168.990251] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [168.990439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [168.990617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [168.990761] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [168.990905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [168.991043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [168.991207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [168.991426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [168.991578] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [168.991729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [168.991868] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [168.992004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [168.992152] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [168.992364] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [168.992573] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [168.992722] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [168.992894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [168.993044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [168.993231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [168.993418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [168.993557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [168.993694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [168.993832] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [168.993974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [168.994111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [168.994295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [168.994505] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [168.994648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [168.994789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [168.994928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [168.995102] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [168.995356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [168.995549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [168.995692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [168.995836] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [168.995978] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [168.996114] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [168.996298] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [168.996542] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 1000] for use by error capture

<7> [168.996656] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000]

<7> [168.996785] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [168.996925] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [168.997873] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [168.998013] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [168.998149] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [169.008593] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [169.008847] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [169.008985] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [169.009120] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [169.009304] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [169.009476] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [169.010093] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [169.010249] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [169.010389] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [169.010497] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [169.013279] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [169.014093] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [169.014404] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [169.014950] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [169.015288] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [169.015333] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [169.017221] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [169.034807] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [169.038456] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [169.039792] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [169.040108] [drm:drm_client_modeset_probe]

<7> [169.040070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [169.040390] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [169.040314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [169.040431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.040579] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [169.040528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [169.040809] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [169.040824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [169.040741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [169.040838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.040978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [169.040991] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [169.041004] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [169.041017] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.041153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [169.041166] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [169.041197] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [169.041204] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [169.041207] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [169.041211] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [169.041311] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [169.041331] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [169.041361] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [169.041390] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [169.041482] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [169.041692] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [169.041698] i915 device info: graphics version: 9

<7> [169.041701] i915 device info: media version: 9

<7> [169.041705] i915 device info: display version: 9

<7> [169.041708] i915 device info: gt: 2

<7> [169.041712] i915 device info: memory-regions: 21

<7> [169.041716] i915 device info: page-sizes: 11000

<7> [169.041719] i915 device info: platform: KABYLAKE

<7> [169.041722] i915 device info: ppgtt-size: 48

<7> [169.041726] i915 device info: ppgtt-type: 2

<7> [169.041729] i915 device info: dma_mask_size: 39

<7> [169.041733] i915 device info: is_mobile: no

<7> [169.041737] i915 device info: is_lp: no

<7> [169.041740] i915 device info: require_force_probe: no

<7> [169.041743] i915 device info: is_dgfx: no

<7> [169.041746] i915 device info: has_64bit_reloc: yes

<7> [169.041750] i915 device info: has_64k_pages: no

<7> [169.041754] i915 device info: gpu_reset_clobbers_display: no

<7> [169.041757] i915 device info: has_reset_engine: yes

<7> [169.041760] i915 device info: has_3d_pipeline: yes

<7> [169.041764] i915 device info: has_4tile: no

<7> [169.041767] i915 device info: has_flat_ccs: no

<7> [169.041771] i915 device info: has_global_mocs: no

<7> [169.041774] i915 device info: has_gmd_id: no

<7> [169.041777] i915 device info: has_gt_uc: yes

<7> [169.041781] i915 device info: has_heci_pxp: no

<7> [169.041784] i915 device info: has_heci_gscfi: no

<7> [169.041788] i915 device info: has_guc_deprivilege: no

<7> [169.041791] i915 device info: has_l3_ccs_read: no

<7> [169.041795] i915 device info: has_l3_dpf: no

<7> [169.041797] i915 device info: has_llc: yes

<7> [169.041801] i915 device info: has_logical_ring_contexts: yes

<7> [169.041804] i915 device info: has_logical_ring_elsq: no

<7> [169.041807] i915 device info: has_media_ratio_mode: no

<7> [169.041811] i915 device info: has_mslice_steering: no

<7> [169.041814] i915 device info: has_oa_bpc_reporting: no

<7> [169.041818] i915 device info: has_oa_slice_contrib_limits: no

<7> [169.041821] i915 device info: has_one_eu_per_fuse_bit: no

<7> [169.041825] i915 device info: has_pxp: no

<7> [169.041828] i915 device info: has_rc6: yes

<7> [169.041831] i915 device info: has_rc6p: no

<7> [169.041834] i915 device info: has_rps: yes

<7> [169.041838] i915 device info: has_runtime_pm: yes

<7> [169.041841] i915 device info: has_snoop: no

<7> [169.041845] i915 device info: has_coherent_ggtt: yes

<7> [169.041848] i915 device info: tuning_thread_rr_after_dep: no

<7> [169.041852] i915 device info: unfenced_needs_alignment: no

<7> [169.041855] i915 device info: hws_needs_physical: no

<7> [169.041859] i915 device info: has_pooled_eu: no

<7> [169.041862] i915 device info: cursor_needs_physical: no

<7> [169.041866] i915 device info: has_cdclk_crawl: no

<7> [169.041869] i915 device info: has_cdclk_squash: no

<7> [169.041873] i915 device info: has_ddi: yes

<7> [169.041876] i915 device info: has_dp_mst: yes

<7> [169.041880] i915 device info: has_dsb: no

<7> [169.041883] i915 device info: has_fpga_dbg: yes

<7> [169.041887] i915 device info: has_gmch: no

<7> [169.041890] i915 device info: has_hotplug: yes

<7> [169.041893] i915 device info: has_hti: no

<7> [169.041897] i915 device info: has_ipc: yes

<7> [169.041900] i915 device info: has_modular_fia: no

<7> [169.041904] i915 device info: has_overlay: no

<7> [169.041907] i915 device info: has_psr: yes

<7> [169.041911] i915 device info: has_psr_hw_tracking: yes

<7> [169.041914] i915 device info: overlay_needs_physical: no

<7> [169.041917] i915 device info: supports_tv: no

<7> [169.041921] i915 device info: has_hdcp: yes

<7> [169.041924] i915 device info: has_dmc: yes

<7> [169.041927] i915 device info: has_dsc: no

<7> [169.041930] i915 device info: rawclk rate: 24000 kHz

<7> [169.041934] i915 device info: iommu: enabled

<7> [169.041937] i915 device info: available engines: 40403

<7> [169.041941] i915 device info: slice total: 1, mask=0001

<7> [169.041945] i915 device info: subslice total: 3

<7> [169.041949] i915 device info: slice0: 3 subslices, mask=00000007

<7> [169.041953] i915 device info: slice1: 0 subslices, mask=00000000

<7> [169.041956] i915 device info: slice2: 0 subslices, mask=00000000

<7> [169.041959] i915 device info: EU total: 24

<7> [169.041962] i915 device info: EU per subslice: 8

<7> [169.041965] i915 device info: has slice power gating: no

<7> [169.041969] i915 device info: has subslice power gating: no

<7> [169.041972] i915 device info: has EU power gating: yes

<6> [169.041976] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [169.041979] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [169.041983] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [169.042589] [drm:drm_client_modeset_probe]

<7> [169.042854] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [169.042902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.043089] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [169.043111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [169.043132] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.043318] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [169.043339] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [169.043359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.043523] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [169.043544] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [169.043554] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [169.043560] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [169.043566] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [169.043679] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [169.043700] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [169.043732] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [169.043760] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [169.047522] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [169.194539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [169.194842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [169.194982] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [169.195108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [169.195792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.092930] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.100972] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [180.125417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.134131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [180.134471] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [180.134786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.134835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [180.135300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [180.135650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [180.136147] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [180.136667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.143556] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [180.316246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.324898] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.325658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.326049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.326709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.327451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [180.327985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [180.328318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [180.328713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [180.329018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [180.357504] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [180.414257] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [180.672739] [IGT] Reloading i915 as normal

<7> [180.824472] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [180.824675] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [180.824833] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [180.824940] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [180.825133] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [180.825445] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [180.825600] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [180.826264] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [180.826383] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [180.826499] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [180.826614] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [180.826620] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [180.826837] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [180.826853] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [180.826994] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [180.827368] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [180.827538] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [180.827718] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [180.827862] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [180.828005] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [180.832156] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [180.832317] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [180.832452] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [180.832587] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [180.832723] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [180.832836] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [180.832956] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [180.833056] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [180.833156] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [180.833269] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [180.833428] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [180.833527] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [180.833661] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [180.833760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [180.834137] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [180.834308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [180.834507] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [180.834653] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [180.834798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [180.834944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [180.835089] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [180.835246] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [180.835442] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [180.835588] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [180.835733] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [180.835879] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [180.836021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [180.836162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [180.836382] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [180.836580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [180.836723] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [180.836868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [180.837030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [180.837263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [180.837483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [180.837634] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [180.837775] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [180.837917] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [180.838060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [180.838280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [180.838439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [180.838585] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [180.839153] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [180.839307] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [180.839516] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [180.839700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.839842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.839984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [180.840138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [180.840384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [180.840549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [180.840694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [180.840837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [180.841011] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [180.841928] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [180.842234] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [180.842504] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [180.842647] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [180.842786] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [180.842886] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [180.842983] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [180.843079] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [180.843208] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [180.843322] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [180.843435] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [180.843531] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [180.845087] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.

<7> [180.845972] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [180.846183] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)

<7> [180.846388] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [180.849153] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [180.849344] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [180.849488] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [180.849630] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [180.849778] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [180.849921] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [180.850061] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [180.850256] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [180.850416] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [180.850557] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [180.850699] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [180.850874] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [180.851073] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [180.851260] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [180.851404] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [180.851534] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [180.851698] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [180.851899] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [180.852219] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [180.852435] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [180.852649] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [180.852828] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [180.853022] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [180.853204] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [181.069183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.080183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.091184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.102185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.113183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.124183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.135184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.146185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.157182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.168183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.179184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.190185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.201183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.212183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.223183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.234185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.245182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.256183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.267183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.278185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.289181] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.300182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.311183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.322185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.333183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.344182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.355183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.366185] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.377182] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.388183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.399183] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.410184] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d4003ff)

<7> [181.410367] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [181.410388] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [181.410445] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [181.410645] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [181.410829] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT)

<7> [181.410986] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [181.411427] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [181.411576] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT)

<7> [181.411777] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [181.412104] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [181.412311] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [181.412452] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)

<7> [181.412669] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present

<7> [181.412811] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present

<7> [181.413149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [181.413388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [181.413552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [181.413697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [181.413841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [181.413986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [181.414130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [181.414336] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [181.414493] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [181.414638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [181.414784] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [181.414942] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [181.415088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [181.415291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [181.415497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [181.415655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [181.415863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [181.416012] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [181.416187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [181.416382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [181.416530] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [181.416677] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [181.416824] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [181.416970] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [181.417141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [181.417358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [181.417518] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [181.417657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [181.417797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [181.417933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [181.418071] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [181.418272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [181.418425] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [181.418563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [181.418700] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [181.418856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [181.418995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [181.419132] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [181.419336] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [181.419600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [181.419793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [181.419953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [181.420126] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [181.420329] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [181.420481] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [181.420616] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [181.420780] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 1000] for use by error capture

<7> [181.420895] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000]

<7> [181.421025] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [181.421178] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [181.422084] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [181.422306] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [181.422443] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [181.433205] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [181.433455] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [181.433594] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [181.433728] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [181.433862] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [181.434013] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [181.434644] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [181.434795] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [181.434938] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [181.435049] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [181.438933] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [181.439676] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [181.439975] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [181.440640] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [181.440946] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [181.440989] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [181.443081] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [181.456149] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [181.458472] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [181.459090] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [181.459354] [drm:drm_client_modeset_probe]

<7> [181.459619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [181.459658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [181.459835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [181.460072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [181.460302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [181.460513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [181.460773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [181.461055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [181.461236] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [181.461262] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [181.461472] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [181.461477] i915 device info: graphics version: 9

<7> [181.461481] i915 device info: media version: 9

<7> [181.461484] i915 device info: display version: 9

<7> [181.461487] i915 device info: gt: 2

<7> [181.461491] i915 device info: memory-regions: 21

<7> [181.461423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [181.461494] i915 device info: page-sizes: 11000

<7> [181.461498] i915 device info: platform: KABYLAKE

<7> [181.461501] i915 device info: ppgtt-size: 48

<7> [181.461504] i915 device info: ppgtt-type: 2

<7> [181.461507] i915 device info: dma_mask_size: 39

<7> [181.461510] i915 device info: is_mobile: no

<7> [181.461513] i915 device info: is_lp: no

<7> [181.461516] i915 device info: require_force_probe: no

<7> [181.461519] i915 device info: is_dgfx: no

<7> [181.461522] i915 device info: has_64bit_reloc: yes

<7> [181.461525] i915 device info: has_64k_pages: no

<7> [181.461528] i915 device info: gpu_reset_clobbers_display: no

<7> [181.461531] i915 device info: has_reset_engine: yes

<7> [181.461534] i915 device info: has_3d_pipeline: yes

<7> [181.461536] i915 device info: has_4tile: no

<7> [181.461539] i915 device info: has_flat_ccs: no

<7> [181.461542] i915 device info: has_global_mocs: no

<7> [181.461544] i915 device info: has_gmd_id: no

<7> [181.461547] i915 device info: has_gt_uc: yes

<7> [181.461550] i915 device info: has_heci_pxp: no

<7> [181.461553] i915 device info: has_heci_gscfi: no

<7> [181.461556] i915 device info: has_guc_deprivilege: no

<7> [181.461559] i915 device info: has_l3_ccs_read: no

<7> [181.461561] i915 device info: has_l3_dpf: no

<7> [181.461564] i915 device info: has_llc: yes

<7> [181.461580] i915 device info: has_logical_ring_contexts: yes

<7> [181.461583] i915 device info: has_logical_ring_elsq: no

<7> [181.461587] i915 device info: has_media_ratio_mode: no

<7> [181.461590] i915 device info: has_mslice_steering: no

<7> [181.461594] i915 device info: has_oa_bpc_reporting: no

<7> [181.461597] i915 device info: has_oa_slice_contrib_limits: no

<7> [181.461600] i915 device info: has_one_eu_per_fuse_bit: no

<7> [181.461604] i915 device info: has_pxp: no

<7> [181.461607] i915 device info: has_rc6: yes

<7> [181.461610] i915 device info: has_rc6p: no

<7> [181.461614] i915 device info: has_rps: yes

<7> [181.461617] i915 device info: has_runtime_pm: yes

<7> [181.461621] i915 device info: has_snoop: no

<7> [181.461624] i915 device info: has_coherent_ggtt: yes

<7> [181.461627] i915 device info: tuning_thread_rr_after_dep: no

<7> [181.461631] i915 device info: unfenced_needs_alignment: no

<7> [181.461634] i915 device info: hws_needs_physical: no

<7> [181.461638] i915 device info: has_pooled_eu: no

<7> [181.461641] i915 device info: cursor_needs_physical: no

<7> [181.461644] i915 device info: has_cdclk_crawl: no

<7> [181.461648] i915 device info: has_cdclk_squash: no

<7> [181.461651] i915 device info: has_ddi: yes

<7> [181.461654] i915 device info: has_dp_mst: yes

<7> [181.461658] i915 device info: has_dsb: no

<7> [181.461661] i915 device info: has_fpga_dbg: yes

<7> [181.461665] i915 device info: has_gmch: no

<7> [181.461668] i915 device info: has_hotplug: yes

<7> [181.461671] i915 device info: has_hti: no

<7> [181.461675] i915 device info: has_ipc: yes

<7> [181.461678] i915 device info: has_modular_fia: no

<7> [181.461681] i915 device info: has_overlay: no

<7> [181.461684] i915 device info: has_psr: yes

<7> [181.461688] i915 device info: has_psr_hw_tracking: yes

<7> [181.461691] i915 device info: overlay_needs_physical: no

<7> [181.461694] i915 device info: supports_tv: no

<7> [181.461697] i915 device info: has_hdcp: yes

<7> [181.461701] i915 device info: has_dmc: yes

<7> [181.461704] i915 device info: has_dsc: no

<7> [181.461707] i915 device info: rawclk rate: 24000 kHz

<7> [181.461711] i915 device info: iommu: enabled

<7> [181.461715] i915 device info: available engines: 40403

<7> [181.461719] i915 device info: slice total: 1, mask=0001

<7> [181.461723] i915 device info: subslice total: 3

<7> [181.461726] i915 device info: slice0: 3 subslices, mask=00000007

<7> [181.461730] i915 device info: slice1: 0 subslices, mask=00000000

<7> [181.461734] i915 device info: slice2: 0 subslices, mask=00000000

<7> [181.461738] i915 device info: EU total: 24

<7> [181.461741] i915 device info: EU per subslice: 8

<7> [181.461745] i915 device info: has slice power gating: no

<7> [181.461748] i915 device info: has subslice power gating: no

<7> [181.461752] i915 device info: has EU power gating: yes

<6> [181.461755] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [181.461759] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [181.461763] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [181.462051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.462597] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [181.462863] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [181.462887] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [181.462909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [181.463187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.463779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [181.464379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [181.464937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [181.467132] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [181.467886] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [181.468505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [181.468766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [181.468985] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [181.469219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [181.469904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.470141] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [181.470205] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [181.470228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [181.470250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [181.470459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.471897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.472103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [181.472892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.473410] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.473420] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [181.473582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [181.504788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.504797] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [181.504956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.505113] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [181.505130] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [181.505143] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [181.505154] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [181.505157] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [181.505160] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [181.505349] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [181.505371] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [181.505394] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [181.505426] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [181.506443] [drm:drm_client_modeset_probe]

<7> [181.506640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [181.506677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [181.506877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.507509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.507657] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [181.507673] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [181.507686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [181.507804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.508289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [181.508778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [181.509378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [181.510891] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [181.512054] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [181.512202] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [181.512723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [181.512991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [181.513123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [181.513295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [181.513896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.514074] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [181.514093] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [181.514107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [181.514279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.515543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.515677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [181.516468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.516925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.516932] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [181.517045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [181.547115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.547123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [181.547293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.547433] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [181.547449] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [181.547456] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [181.547460] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [181.547463] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [181.547547] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [181.547561] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [181.547588] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [181.547606] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [181.547607] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [181.547659] [drm:drm_client_modeset_probe]

<7> [181.547624] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [181.547883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.548585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.548721] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [181.548741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [181.548756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [181.548925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.549410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.549557] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [181.549572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [181.549586] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [181.549703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.550162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [181.550678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [181.551290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [181.552434] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [181.553546] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [181.554371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [181.554520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [181.554646] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [181.554767] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [181.555390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.555568] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [181.555583] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [181.555596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [181.555710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.556808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.556927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [181.557624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.558086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.558091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [181.558267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [181.588345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.588364] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [181.588473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.588601] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [181.588615] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [181.588619] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [181.588622] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [181.588625] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [181.588646] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [181.588656] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [181.588672] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [181.588686] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [181.588749] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [181.588767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [181.588903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.589411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [181.589927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [181.590530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [181.591771] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [181.592937] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [181.593755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [181.593995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [181.594125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [181.594287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [181.594874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.595001] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [181.595078] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [181.595091] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [181.595242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.596584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.596694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [181.597470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.597916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.597921] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [181.598024] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [181.622041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.622046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [181.622154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.622322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [181.625219] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [181.625248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [181.625367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.625819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.625945] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [181.626533] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [181.626547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [181.626662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.627197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [181.627690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [181.628260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [181.629436] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [181.630535] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [181.631352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [181.631506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [181.631630] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [181.631749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [181.632331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.632502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [181.633037] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [181.633050] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [181.633165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.634327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.634433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [181.635100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.635610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.635614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [181.635731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [181.660806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.660810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [181.660917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.661042] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [181.661507] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [181.661521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [181.661637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.662091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.662311] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [181.662354] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [181.662368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [181.662493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.662944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [181.663489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [181.664036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [181.665185] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [181.666161] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [181.666993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [181.667138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [181.667293] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [181.667449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [181.668032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.668158] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [181.668210] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [181.668236] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [181.668349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.669500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.669605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [181.670344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.670786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.670790] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [181.670893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [181.696009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.696014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [181.696122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.696258] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [192.739463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [192.747901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [192.772327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [192.781877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [192.782808] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [192.783547] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [192.784006] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [192.784469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [192.787960] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [192.789610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [192.814047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [192.820327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [192.820564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [192.821319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [192.821704] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [192.821740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [192.821937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [192.822523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [192.823105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [192.823676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [192.825338] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [192.826089] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [192.826662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [192.827035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [192.827261] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [192.827452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [192.828107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [192.828323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [192.828348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [192.828528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [192.830087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [192.830276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [192.831227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [192.831735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [192.831743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [192.831909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [192.856535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [192.856540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [192.856657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [192.856797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [192.856821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [192.856944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [192.857416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [192.857554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [192.857570] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [192.857692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [192.858156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [192.858683] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [192.859247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [192.860441] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [192.861539] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [192.862211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [192.862359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [192.862497] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [192.862617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [192.863229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [192.863417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [192.863432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [192.863545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [192.864718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [192.864824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [192.865539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [192.865995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [192.866000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [192.866103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [192.891769] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [192.891774] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [192.891883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [192.892013] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [192.892030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [192.896215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [193.081065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [193.085905] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [193.086580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [193.086729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [193.086887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [193.087741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [193.088339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [193.088559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [193.088703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [193.088845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [193.088987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [193.089164] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [193.089220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [193.090399] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [193.091212] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [193.092027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [193.092271] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [193.092769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [193.092929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [193.093367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [193.093561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [193.093570] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [193.093728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [193.097873] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [193.097879] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [193.097992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [193.123353] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [193.158303] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [193.367769] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload