Result: pass
git-log-oneline run0 boot0 dmesg0 runtimes0
Detail | Value |
---|---|
Time | 1.33 seconds |
Igt-Version | IGT-Version: 1.23-g78619fde (x86_64) (Linux: 4.19.0-g84df9525b0c2-linus-v4.19 x86_64) |
Out | Starting subtest: basic-S3 [cmd] rtcwake: wakeup from "mem" using /dev/rtc0 at Mon Oct 22 07:42:22 2018 Subtest basic-S3: SUCCESS (1.330s) |
Err | Starting subtest: basic-S3 Subtest basic-S3: SUCCESS (1.330s) |
Dmesg | <6> [185.288992] Console: switching to colour dummy device 80x25 <6> [185.289045] [IGT] gem_exec_suspend: executing <5> [185.292746] Setting dangerous option reset - tainting kernel <6> [185.296361] [IGT] gem_exec_suspend: starting subtest basic-S3 <7> [185.540738] [drm:i915_gem_do_execbuffer [i915]] EINVAL at i915_gem_do_execbuffer:2222 <6> [185.707647] PM: suspend entry (deep) <6> [185.707665] PM: Syncing filesystems ... done. <6> [185.709631] Freezing user space processes ... (elapsed 0.001 seconds) done. <6> [185.711529] OOM killer disabled. <6> [185.711531] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. <6> [185.713243] Suspending console(s) (use no_console_suspend to debug) <7> [185.722025] [drm:ilk_audio_codec_disable [i915]] Disable audio codec on port D, pipe A <7> [185.722138] [drm:intel_disable_pipe [i915]] disabling pipe A <5> [185.731764] sd 0:0:0:0: [sda] Synchronizing SCSI cache <5> [185.731909] sd 0:0:0:0: [sda] Stopping disk <7> [185.740279] [drm:intel_dp_port_enabled [i915]] No pipe for DP port B found <7> [185.740321] [drm:intel_dp_port_enabled [i915]] No pipe for DP port C found <7> [185.740361] [drm:intel_dp_port_enabled [i915]] No pipe for DP port D found <7> [185.751044] [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 1, on? 1) for crtc 39 <7> [185.751109] [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A <7> [185.751356] [drm:intel_atomic_commit_tail [i915]] [ENCODER:53:CRT] <7> [185.751393] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:HDMI D] <7> [185.751452] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP D] <7> [185.751488] [drm:verify_connector_state.isra.87 [i915]] [CONNECTOR:55:HDMI-A-1] <7> [185.751526] [drm:verify_single_dpll_state.isra.88 [i915]] PCH DPLL A <7> [185.751566] [drm:verify_single_dpll_state.isra.88 [i915]] PCH DPLL B <7> [185.751636] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A] <7> [185.791856] [drm:intel_power_well_disable [i915]] disabling always-on <6> [185.818913] ACPI: Preparing to enter system sleep state S3 <6> [185.829070] PM: Saving platform NVS memory <6> [185.831015] Disabling non-boot CPUs ... <6> [185.847323] smpboot: CPU 1 is now offline <6> [185.861589] smpboot: CPU 2 is now offline <4> [185.873405] NOHZ: local_softirq_pending 202 <4> [185.873426] NOHZ: local_softirq_pending 202 <6> [185.875030] smpboot: CPU 3 is now offline <6> [185.887174] smpboot: CPU 4 is now offline <4> [185.900412] NOHZ: local_softirq_pending 202 <4> [185.900434] NOHZ: local_softirq_pending 202 <6> [185.902042] smpboot: CPU 5 is now offline <6> [185.916955] smpboot: CPU 6 is now offline <6> [185.926609] smpboot: CPU 7 is now offline <6> [185.928864] ACPI: Low-level resume complete <6> [185.928935] PM: Restoring platform NVS memory <6> [185.930001] Enabling non-boot CPUs ... <6> [185.930196] x86: Booting SMP configuration: <6> [185.930212] smpboot: Booting Node 0 Processor 1 APIC 0x2 <4> [185.934296] cache: parent cpu1 should not be sleeping <6> [185.936503] CPU1 is up <6> [185.936629] smpboot: Booting Node 0 Processor 2 APIC 0x4 <4> [185.940022] cache: parent cpu2 should not be sleeping <6> [185.941462] CPU2 is up <6> [185.941588] smpboot: Booting Node 0 Processor 3 APIC 0x6 <4> [185.944912] cache: parent cpu3 should not be sleeping <6> [185.946462] CPU3 is up <6> [185.946590] smpboot: Booting Node 0 Processor 4 APIC 0x1 <4> [185.950092] cache: parent cpu4 should not be sleeping <6> [185.951798] CPU4 is up <6> [185.951917] smpboot: Booting Node 0 Processor 5 APIC 0x3 <4> [185.955363] cache: parent cpu5 should not be sleeping <6> [185.957154] CPU5 is up <6> [185.957299] smpboot: Booting Node 0 Processor 6 APIC 0x5 <4> [185.960742] cache: parent cpu6 should not be sleeping <6> [185.962647] CPU6 is up <6> [185.962772] smpboot: Booting Node 0 Processor 7 APIC 0x7 <4> [185.966281] cache: parent cpu7 should not be sleeping <6> [185.968705] CPU7 is up <6> [185.977698] ACPI: Waking up from system sleep state S3 <4> [186.005208] hpet1: lost 7341 rtc interrupts <7> [186.005741] [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.009200] [drm:i915_redisable_vga_power_on [i915]] Something enabled VGA plane, disabling it <7> [186.009923] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc6ddb018 <7> [186.010040] [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [186.010104] [drm:intel_opregion_setup [i915]] SWSCI supported <7> [186.014131] [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [186.014342] [drm:intel_opregion_setup [i915]] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000041) <7> [186.014391] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241 <7> [186.014438] [drm:intel_opregion_setup [i915]] ASLE supported <7> [186.014486] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [186.014564] [drm:intel_init_pch_refclk [i915]] has_panel 0 has_lvds 0 has_ck505 0 using_ssc_source 0 <7> [186.014612] [drm:intel_init_pch_refclk [i915]] Disabling CPU source output <7> [186.014875] [drm:intel_init_pch_refclk [i915]] Disabling SSC source <7> [186.015340] [drm:intel_crt_reset [i915]] crt adpa set to 0xf40000 <7> [186.018430] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 400000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0 <7> [186.018486] [drm:i915_pm_resume [i915]] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns. <7> [186.018543] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0 <7> [186.018582] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0 <7> [186.018621] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0 <7> [186.018658] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe A] hw state readout: disabled <7> [186.018732] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 <7> [186.018776] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 <7> [186.018814] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 <7> [186.018849] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe B] hw state readout: disabled <7> [186.018916] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL A hw state readout: crtc_mask 0x00000000, on 0 <7> [186.018972] [drm:intel_modeset_setup_hw_state [i915]] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 <7> [186.019027] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:53:CRT] hw state readout: disabled, pipe A <7> [186.019066] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:HDMI D] hw state readout: disabled, pipe A <7> [186.019140] [drm:intel_dp_port_enabled [i915]] No pipe for DP port D found <7> [186.019176] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:60:DP D] hw state readout: disabled, pipe A <7> [186.019335] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:52:VGA-1] hw state readout: disabled <7> [186.019462] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:55:HDMI-A-1] hw state readout: disabled <7> [186.019565] [drm:intel_dp_port_enabled [i915]] No pipe for DP port D found <7> [186.019616] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:61:DP-1] hw state readout: disabled <7> [186.019709] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][setup_hw_state] <7> [186.019757] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) <7> [186.019808] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0 <7> [186.019856] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 <7> [186.019908] [drm:intel_dump_pipe_config [i915]] requested mode: <7> [186.019917] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 <7> [186.019969] [drm:intel_dump_pipe_config [i915]] adjusted mode: <7> [186.019976] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 <7> [186.020029] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 <7> [186.020079] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 <5> [186.020081] sd 0:0:0:0: [sda] Starting disk <7> [186.020130] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled <7> [186.020174] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 <7> [186.020209] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 <7> [186.020244] [drm:intel_dump_pipe_config [i915]] planes on this crtc <7> [186.020279] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0 <7> [186.020332] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 <7> [186.020374] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0 <7> [186.020401] [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe B][setup_hw_state] <7> [186.020428] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) <7> [186.020455] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 <7> [186.020481] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 <7> [186.020507] [drm:intel_dump_pipe_config [i915]] requested mode: <7> [186.020511] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 <7> [186.020538] [drm:intel_dump_pipe_config [i915]] adjusted mode: <7> [186.020541] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 <7> [186.020568] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 <7> [186.020595] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 <7> [186.020622] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled <7> [186.020649] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 <7> [186.020675] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 <7> [186.020702] [drm:intel_dump_pipe_config [i915]] planes on this crtc <7> [186.020728] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = 0 <7> [186.020770] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite B] disabled, scaler_id = 0 <7> [186.020798] [drm:intel_dump_pipe_config [i915]] [PLANE:48:cursor B] disabled, scaler_id = 0 <7> [186.020863] [drm:intel_atomic_check [i915]] [CONNECTOR:55:HDMI-A-1] checking for sink bpp constrains <7> [186.020894] [drm:intel_hdmi_compute_config [i915]] picking bpc to 12 for HDMI output <7> [186.020921] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 36 for HDMI <7> [186.020950] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 3 <7> [186.020977] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [186.021004] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][modeset] <7> [186.021031] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40) <7> [186.021058] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [186.021085] [drm:intel_dump_pipe_config [i915]] fdi: lanes: 3; gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [186.021111] [drm:intel_dump_pipe_config [i915]] audio: 1, infoframes: 1 <7> [186.021138] [drm:intel_dump_pipe_config [i915]] requested mode: <7> [186.021141] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [186.021168] [drm:intel_dump_pipe_config [i915]] adjusted mode: <7> [186.021171] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [186.021198] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 <7> [186.021225] [drm:intel_dump_pipe_config [i915]] port clock: 222750, pipe src size: 1920x1080, pixel rate 148500 <7> [186.021251] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled <7> [186.021278] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 <7> [186.021316] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0xc4010001, dpll_md: 0x0, fp0: 0x30f06, fp1: 0x30f06 <7> [186.021342] [drm:intel_dump_pipe_config [i915]] planes on this crtc <7> [186.021379] [drm:intel_dump_pipe_config [i915]] [PLANE:28:primary A] disabled, scaler_id = 0 <7> [186.021427] [drm:intel_dump_pipe_config [i915]] [PLANE:31:sprite A] disabled, scaler_id = 0 <7> [186.021454] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0 <7> [186.021512] [drm:intel_find_shared_dpll [i915]] [CRTC:39:pipe A] allocated PCH DPLL A <7> [186.021540] [drm:intel_reference_shared_dpll [i915]] using PCH DPLL A for pipe A <7> [186.021691] [drm:intel_atomic_commit_tail [i915]] [ENCODER:53:CRT] <7> [186.021720] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:HDMI D] <7> [186.021748] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP D] <7> [186.021775] [drm:verify_connector_state.isra.87 [i915]] [CONNECTOR:52:VGA-1] <7> [186.021809] [drm:verify_connector_state.isra.87 [i915]] [CONNECTOR:61:DP-1] <7> [186.021843] [drm:intel_dp_port_enabled [i915]] No pipe for DP port D found <7> [186.021873] [drm:verify_single_dpll_state.isra.88 [i915]] PCH DPLL A <7> [186.021906] [drm:verify_single_dpll_state.isra.88 [i915]] PCH DPLL B <7> [186.021953] [drm:intel_prepare_shared_dpll [i915]] setting up PCH DPLL A <7> [186.022741] [drm:intel_enable_pipe [i915]] enabling pipe A <7> [186.023617] [drm:gen6_fdi_link_train [i915]] FDI_RX_IIR 0x100 <7> [186.023658] [drm:gen6_fdi_link_train [i915]] FDI train 1 done. <7> [186.024352] [drm:gen6_fdi_link_train [i915]] FDI_RX_IIR 0x200 <7> [186.024388] [drm:gen6_fdi_link_train [i915]] FDI train 2 done. <7> [186.024424] [drm:ironlake_crtc_enable [i915]] FDI train done. <7> [186.024464] [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 1, on? 0) for crtc 39 <7> [186.024499] [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A <7> [186.025971] [drm:intel_enable_hdmi_audio [i915]] Enabling HDMI audio on pipe A <7> [186.026007] [drm:intel_audio_codec_enable [i915]] ELD on [CONNECTOR:55:HDMI-A-1], [ENCODER:54:HDMI D] <7> [186.026043] [drm:ilk_audio_codec_enable [i915]] Enable audio codec on port D, pipe A, 32 bytes ELD <7> [186.026095] [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [186.092535] [drm:verify_connector_state.isra.87 [i915]] [CONNECTOR:55:HDMI-A-1] <7> [186.092578] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A] <7> [186.092640] [drm:verify_single_dpll_state.isra.88 [i915]] PCH DPLL A <7> [186.092683] [drm:intel_atomic_commit_tail [i915]] [CRTC:51:pipe B] <7> [186.092890] [drm:intel_crt_detect [i915]] [CONNECTOR:52:VGA-1] force=0 <7> [186.092951] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0xf40000 <7> [186.093226] [drm:intel_opregion_register [i915]] 3 outputs detected <7> [186.101503] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0 <7> [186.101541] [drm:intel_crt_detect [i915]] CRT not detected via hotplug <7> [186.101830] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [186.101875] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [186.102095] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [186.102101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [186.102137] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.102174] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [186.102988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [186.103025] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [186.103061] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found] <7> [186.103072] [drm:drm_helper_hpd_irq_event] [CONNECTOR:52:VGA-1] status updated from disconnected to disconnected <7> [186.103117] [drm:intel_hdmi_detect [i915]] [CONNECTOR:55:HDMI-A-1] <7> [186.129049] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) <7> [186.129088] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [186.129316] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1) <7> [186.129322] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) <7> [186.129327] [drm:drm_detect_monitor_audio] Monitor has basic audio support <7> [186.129332] [drm:drm_helper_hpd_irq_event] [CONNECTOR:55:HDMI-A-1] status updated from connected to connected <7> [186.129370] [drm:intel_dp_detect [i915]] [CONNECTOR:61:DP-1] <7> [186.132010] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.134609] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.137196] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.139784] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.142349] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.144906] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.147463] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.150018] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.152575] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.155132] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.157690] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.160247] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.162831] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.165389] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.167948] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.170508] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.173064] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.175621] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.178179] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.180735] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.183294] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.185868] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.188425] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.190982] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.193539] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.196098] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.198655] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.201213] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.203771] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.206330] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.208887] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.211445] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7143003f <7> [186.211462] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110 <7> [186.211474] [drm:drm_helper_hpd_irq_event] [CONNECTOR:61:DP-1] status updated from disconnected to disconnected <6> [186.312412] OOM killer enabled. <6> [186.312415] Restarting tasks ... done. <6> [186.314194] PM: suspend exit <6> [186.340525] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) <6> [186.340556] ata4: SATA link down (SStatus 0 SControl 300) <6> [186.340588] ata5: SATA link down (SStatus 0 SControl 300) <6> [186.340618] ata3: SATA link down (SStatus 0 SControl 300) <6> [186.340649] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6> [186.342158] ata2.00: configured for UDMA/100 <6> [186.353244] ata1.00: configured for UDMA/133 <7> [186.628642] [drm:i915_gem_do_execbuffer [i915]] EINVAL at i915_gem_do_execbuffer:2222 <5> [186.632924] Setting dangerous option reset - tainting kernel <6> [186.633206] [IGT] gem_exec_suspend: exiting, ret=0 <6> [186.674801] Console: switching to colour frame buffer device 240x67 |