igt@xe_pm@d3cold-basic on shard-lnl@xe-pw-167536v1 Test details

Results for igt@xe_pm@d3cold-basic

Detail	Value
Duration	unknown
Hostname	shard-lnl-1
Igt-Version	IGT-Version: 2.4-gb0612a4a1 (x86_64) (Linux: 7.1.0-rc5-lgci-xe-xe-pw-167536v1-debug+ x86_64)
Out	Using IGT_SRANDOM=1780061590 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3cold-basic Test requirement not met in function setup_d3, file ../tests/intel/xe_pm.c:176: Test requirement: igt_pm_acpi_d3cold_supported(device.pci_root) Last errno: 2, No such file or directory Subtest d3cold-basic: SKIP (0.402s) This test caused an abort condition: Kernel badly tainted (0x240, 0x200) (check dmesg for details): TAINT_WARN: WARN_ON has happened.
Err	Starting subtest: d3cold-basic Subtest d3cold-basic: SKIP (0.402s)
Dmesg Scroll to first warning	<6> [242.685666] Console: switching to colour dummy device 80x25 <6> [242.686343] [IGT] xe_pm: executing <6> [242.733177] [IGT] xe_pm: starting subtest d3cold-basic <7> [242.734353] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [242.734647] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [242.734849] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [242.735089] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [242.735280] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A] <7> [242.735463] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [242.735641] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [242.735811] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [242.736120] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [242.736259] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [242.736463] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [242.736620] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [242.736764] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [242.736906] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [242.737129] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A] <7> [242.737268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [242.737404] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [242.737537] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [242.737723] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [242.737877] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [242.738068] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [242.738186] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [242.738305] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A] <7> [242.738425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [242.738542] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [242.738655] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [242.738774] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [242.738875] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [242.738988] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [242.739068] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [242.739142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [242.739211] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [242.739280] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [242.739349] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [242.739435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [242.739558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 34060 required 0 qgv_peak_bw: 38400 <7> [242.739676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [242.739787] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [242.739885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [242.739987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [242.740121] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 0 kHz <7> [242.740242] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [242.740349] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 153600 kHz <7> [242.740440] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [242.740555] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0 <7> [242.740667] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7> [242.740775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [242.740891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [242.740984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [242.741094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [242.741201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [242.741310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [242.741413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [242.741499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [242.741579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [242.741663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [242.741752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [242.741839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [242.741925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [242.742100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [242.742216] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [242.742331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [242.742433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [242.742516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [242.742594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [242.742680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [242.742765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [242.742850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [242.742927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 37 vsync start: 103, vsync end: 97 <7> [242.743015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1869, vmax vblank: 1869, vmin vtotal: 1906, vmax vtotal: 1906 <7> [242.743109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [242.743209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [242.743306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [242.743403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [242.743483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [242.743557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [242.743638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7> [242.743734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [242.743829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [242.743925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7> [242.744029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [242.744131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [242.744231] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [242.744334] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [242.744419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7> [242.744499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [242.744577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [242.744654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [242.744740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [242.744827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [242.744912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [242.744996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [242.745088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [242.745188] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0 <7> [242.745287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries <7> [242.745381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [242.745461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.745536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.745622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.745720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [242.745818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [242.745906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.746033] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.746143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.746254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [242.746358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [242.746442] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [242.746521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [242.746596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [242.746676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [242.746759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [242.746843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [242.746972] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [242.747090] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [242.747264] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [242.752572] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [242.752721] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [242.959177] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7> [242.959728] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [242.969352] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7> [242.969724] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7> [242.970138] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [243.022492] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [243.023067] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [243.023316] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [243.024240] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [243.024658] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [243.025031] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [243.025379] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7> [243.025614] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7> [243.025841] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7> [243.026088] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7> [243.026305] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7> [243.026527] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7> [243.026799] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7> [243.027039] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7> [243.027283] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7> [243.027513] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7> [243.027747] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7> [243.027987] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7> [243.028217] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7> [243.028525] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [243.028765] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [243.029025] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [243.029484] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [243.029849] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [243.030350] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7> [243.030717] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [243.031068] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [243.031457] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [243.031790] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [243.051031] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [243.051539] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [243.051945] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [243.052439] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [243.053375] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [243.054086] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x0 <7> [243.054801] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 0 (mbus joined: no) <7> [243.055721] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_1 <4> [243.056803] ------------[ cut here ]------------ <4> [243.056809] xe 0000:00:02.0: [drm] Interrupts not disabled yet. <4> [243.056813] WARNING: drivers/gpu/drm/i915/display/intel_display_power_well.c:699 at bxt_enable_dc9+0x151/0x200 [xe], CPU#3: kworker/u33:2/75 <4> [243.057216] Modules linked in: snd_hda_codec_intelhdmi snd_hda_codec_hdmi xe drm_gpuvm drm_gpusvm_helper drm_buddy gpu_sched drm_ttm_helper ttm drm_suballoc_helper drm_exec drm_display_helper cec rc_core drm_kunit_helpers i2c_algo_bit kunit hid_sensor_custom hid_sensor_hub hid_generic intel_rapl_msr intel_uncore_frequency intel_uncore_frequency_common x86_pkg_temp_thermal intel_powerclamp intel_ishtp_hid cmdlinepart hid coretemp spi_nor mtd mei_gsc_proxy wmi_bmof kvm_intel kvm irqbypass aesni_intel gf128mul snd_intel_dspcfg rapl snd_hda_codec intel_cstate snd_hda_core snd_hwdep ucsi_acpi r8169 snd_pcm typec_ucsi snd_timer typec spi_intel_pci realtek snd spi_intel phy_package soundcore video mei_me mei idma64 binfmt_misc intel_skl_int3472_tps68470 tps68470_regulator clk_tps68470 int3403_thermal intel_pmc_core processor_thermal_device_pci wmi processor_thermal_device processor_thermal_wt_hint intel_hid int3400_thermal platform_temperature_control sparse_keymap nls_iso8859_1 acpi_thermal_rel pinctrl_intel_platform <4> [243.057561] processor_thermal_soc_slider pmt_telemetry intel_skl_int3472_discrete processor_thermal_rfim pmt_discovery intel_skl_int3472_common processor_thermal_rapl acpi_pad acpi_tad pmt_class intel_rapl_common processor_thermal_wt_req processor_thermal_power_floor intel_pmc_ssram_telemetry intel_ish_ipc processor_thermal_mbox thunderbolt int340x_thermal_zone intel_vsec intel_vpu intel_ishtp dm_multipath msr nvme_fabrics fuse efi_pstore nfnetlink autofs4 [last unloaded: snd_hda_intel] <4> [243.057657] CPU: 3 UID: 0 PID: 75 Comm: kworker/u33:2 Tainted: G U 7.1.0-rc5-lgci-xe-xe-pw-167536v1-debug+ #1 PREEMPT(lazy) <4> [243.057667] Tainted: [U]=USER <4> [243.057672] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <4> [243.057678] Workqueue: pm pm_runtime_work <4> [243.057694] RIP: 0010:bxt_enable_dc9+0x154/0x200 [xe] <4> [243.058062] Code: 48 8b 3b 48 85 ff 74 04 48 8b 7f 08 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 f9 a0 25 e1 48 89 c6 48 8d 3d df c4 c5 ff 4c 89 e2 <67> 48 0f b9 3a e9 6a ff ff ff 48 8b 3b 48 85 ff 74 04 48 8b 7f 08 <4> [243.058070] RSP: 0018:ffffc900003c3b60 EFLAGS: 00010246 <4> [243.058080] RAX: ffffffffa12bc3ca RBX: ffff888125092000 RCX: 0000000000000000 <4> [243.058088] RDX: ffff8881096d8510 RSI: ffffffffa12bc3ca RDI: ffffffffa0c3d020 <4> [243.058093] RBP: ffffc900003c3b70 R08: 0000000000000000 R09: 0000000000000000 <4> [243.058098] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881096d8510 <4> [243.058102] R13: 0000000000000000 R14: ffff888126c0b1c8 R15: ffff888126c0b140 <4> [243.058106] FS: 0000000000000000(0000) GS:ffff8888db203000(0000) knlGS:0000000000000000 <4> [243.058111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [243.058115] CR2: 000077ee93aca000 CR3: 0000000128bb8002 CR4: 0000000008f72ef0 <4> [243.058121] PKRU: 55555554 <4> [243.058125] Call Trace: <4> [243.058128] <TASK> <4> [243.058136] intel_display_power_runtime_suspend+0x85/0x90 [xe] <4> [243.058479] intel_display_driver_pm_runtime_suspend+0xe/0x20 [xe] <4> [243.058807] xe_display_pm_runtime_suspend+0x44/0x90 [xe] <4> [243.059184] xe_pm_runtime_suspend+0x1ad/0x2d0 [xe] <4> [243.059477] xe_pci_runtime_suspend+0x51/0x400 [xe] <4> [243.059765] ? mark_held_locks+0x46/0x90 <4> [243.059777] ? __rpm_callback+0xa5/0x1f0 <4> [243.059787] ? __pfx_pci_pm_runtime_suspend+0x10/0x10 <4> [243.059803] pci_pm_runtime_suspend+0x6a/0x1e0 <4> [243.059812] ? __pfx_pci_pm_runtime_suspend+0x10/0x10 <4> [243.059821] __rpm_callback+0x4b/0x1f0 <7> [243.059636] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <4> [243.059829] ? lock_is_held_type+0xa3/0x130 <4> [243.059843] ? __pfx_pci_pm_runtime_suspend+0x10/0x10 <4> [243.059851] rpm_callback+0x6e/0x80 <4> [243.059860] ? __pfx_pci_pm_runtime_suspend+0x10/0x10 <4> [243.059868] rpm_suspend+0xf8/0x690 <4> [243.059880] ? _raw_spin_unlock_irqrestore+0x27/0x80 <4> [243.059895] ? rpm_idle+0x134/0x3e0 <4> [243.059903] ? __pfx_pci_pm_runtime_idle+0x10/0x10 <4> [243.059911] rpm_idle+0x286/0x3e0 <4> [243.059925] pm_runtime_work+0xaf/0xf0 <4> [243.059933] process_one_work+0x239/0x740 <4> [243.059958] worker_thread+0x200/0x3f0 <4> [243.059982] ? __pfx_worker_thread+0x10/0x10 <4> [243.059993] kthread+0x10d/0x150 <4> [243.060084] ? __pfx_kthread+0x10/0x10 <4> [243.060095] ret_from_fork+0x3bd/0x470 <4> [243.060105] ? __pfx_kthread+0x10/0x10 <4> [243.060113] ret_from_fork_asm+0x1a/0x30 <4> [243.060139] </TASK> <4> [243.060142] irq event stamp: 1057265 <4> [243.060146] hardirqs last enabled at (1057271): [<ffffffff814ac629>] __up_console_sem+0x79/0xa0 <4> [243.060155] hardirqs last disabled at (1057276): [<ffffffff814ac60e>] __up_console_sem+0x5e/0xa0 <4> [243.060160] softirqs last enabled at (1056304): [<ffffffff813d333b>] __irq_exit_rcu+0xdb/0x1c0 <4> [243.060169] softirqs last disabled at (1056297): [<ffffffff813d333b>] __irq_exit_rcu+0xdb/0x1c0 <4> [243.060177] ---[ end trace 0000000000000000 ]--- <7> [243.060013] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [243.060183] xe 0000:00:02.0: [drm:bxt_enable_dc9 [xe]] Enabling DC9 <7> [243.060380] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [243.060503] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 08 <6> [243.136032] [IGT] xe_pm: finished subtest d3cold-basic, SKIP <4> [243.153023] ------------[ cut here ]------------ <4> [243.153103] xe 0000:00:02.0: [drm] Interrupts not disabled yet. <4> [243.153109] WARNING: drivers/gpu/drm/i915/display/intel_display_power_well.c:713 at bxt_disable_dc9+0xcb/0x110 [xe], CPU#0: xe_pm/6609 <4> [243.153546] Modules linked in: snd_hda_codec_intelhdmi snd_hda_codec_hdmi xe drm_gpuvm drm_gpusvm_helper drm_buddy gpu_sched drm_ttm_helper ttm drm_suballoc_helper drm_exec drm_display_helper cec rc_core drm_kunit_helpers i2c_algo_bit kunit hid_sensor_custom hid_sensor_hub hid_generic intel_rapl_msr intel_uncore_frequency intel_uncore_frequency_common x86_pkg_temp_thermal intel_powerclamp intel_ishtp_hid cmdlinepart hid coretemp spi_nor mtd mei_gsc_proxy wmi_bmof kvm_intel kvm irqbypass aesni_intel gf128mul snd_intel_dspcfg rapl snd_hda_codec intel_cstate snd_hda_core snd_hwdep ucsi_acpi r8169 snd_pcm typec_ucsi snd_timer typec spi_intel_pci realtek snd spi_intel phy_package soundcore video mei_me mei idma64 binfmt_misc intel_skl_int3472_tps68470 tps68470_regulator clk_tps68470 int3403_thermal intel_pmc_core processor_thermal_device_pci wmi processor_thermal_device processor_thermal_wt_hint intel_hid int3400_thermal platform_temperature_control sparse_keymap nls_iso8859_1 acpi_thermal_rel pinctrl_intel_platform <4> [243.153864] processor_thermal_soc_slider pmt_telemetry intel_skl_int3472_discrete processor_thermal_rfim pmt_discovery intel_skl_int3472_common processor_thermal_rapl acpi_pad acpi_tad pmt_class intel_rapl_common processor_thermal_wt_req processor_thermal_power_floor intel_pmc_ssram_telemetry intel_ish_ipc processor_thermal_mbox thunderbolt int340x_thermal_zone intel_vsec intel_vpu intel_ishtp dm_multipath msr nvme_fabrics fuse efi_pstore nfnetlink autofs4 [last unloaded: snd_hda_intel] <4> [243.154482] CPU: 0 UID: 0 PID: 6609 Comm: xe_pm Tainted: G U W 7.1.0-rc5-lgci-xe-xe-pw-167536v1-debug+ #1 PREEMPT(lazy) <4> [243.154496] Tainted: [U]=USER, [W]=WARN <4> [243.154502] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <4> [243.154507] RIP: 0010:bxt_disable_dc9+0xce/0x110 [xe] <4> [243.154899] Code: 48 8b 3b 48 85 ff 74 04 48 8b 7f 08 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 6f 9f 25 e1 48 89 c6 48 8d 3d 95 c3 c5 ff 4c 89 e2 <67> 48 0f b9 3a e9 44 ff ff ff 48 8b 3b 48 85 ff 74 04 48 8b 7f 08 <4> [243.154906] RSP: 0018:ffffc90003f67988 EFLAGS: 00010246 <4> [243.154914] RAX: ffffffffa12bc3ca RBX: ffff888125092000 RCX: 0000000000000000 <4> [243.154919] RDX: ffff8881096d8510 RSI: ffffffffa12bc3ca RDI: ffffffffa0c3d060 <4> [243.154923] RBP: ffffc90003f67998 R08: 0000000000000000 R09: 0000000000000000 <4> [243.154927] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881096d8510 <4> [243.154931] R13: 0000000000000000 R14: 0000000000000003 R15: ffff888109bc10d0 <4> [243.154935] FS: 00007d31cd7ba940(0000) GS:ffff8888db083000(0000) knlGS:0000000000000000 <4> [243.154940] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [243.154945] CR2: 00007d31cfa82450 CR3: 0000000110070003 CR4: 0000000008f72ef0 <4> [243.154950] PKRU: 55555554 <4> [243.154953] Call Trace: <4> [243.154974] <TASK> <4> [243.154983] intel_display_power_runtime_resume+0x79/0xf0 [xe] <4> [243.155369] intel_display_driver_pm_runtime_resume_early+0x1c/0x30 [xe] <4> [243.155767] xe_display_pm_runtime_resume+0x44/0xc0 [xe] <4> [243.156172] xe_pm_runtime_resume+0x2bc/0x470 [xe] <4> [243.156483] xe_pci_runtime_resume+0x73/0x90 [xe] <4> [243.156827] pci_pm_runtime_resume+0x97/0xf0 <4> [243.156841] ? __pfx_pci_pm_runtime_resume+0x10/0x10 <4> [243.156851] __rpm_callback+0x4b/0x1f0 <4> [243.156863] ? lock_release+0xd0/0x2b0 <4> [243.156875] ? __pfx_pci_pm_runtime_resume+0x10/0x10 <4> [243.156885] rpm_callback+0x6e/0x80 <4> [243.156893] ? __pfx_pci_pm_runtime_resume+0x10/0x10 <4> [243.156902] rpm_resume+0x58c/0x790 <4> [243.156920] __pm_runtime_resume+0x4e/0x90 <4> [243.156933] d3cold_allowed_store+0x68/0xa0 <4> [243.156944] dev_attr_store+0x17/0x40 <4> [243.156956] sysfs_kf_write+0x4d/0x80 <4> [243.156991] kernfs_fop_write_iter+0x188/0x240 <4> [243.157010] vfs_write+0x283/0x540 <4> [243.157039] ksys_write+0x6f/0xf0 <4> [243.157054] __x64_sys_write+0x19/0x30 <4> [243.157065] x64_sys_call+0x259/0x26e0 <4> [243.157081] do_syscall_64+0x103/0x6d0 <4> [243.157093] ? do_syscall_64+0x23d/0x6d0 <4> [243.157104] ? rcu_read_unlock+0x1c/0x80 <4> [243.157115] ? lock_release+0xd0/0x2b0 <4> [243.157132] ? find_held_lock+0x31/0x90 <4> [243.157139] ? exc_page_fault+0x96/0x2b0 <4> [243.157151] ? lock_release+0xd0/0x2b0 <4> [243.157164] ? trace_hardirqs_on_prepare+0xd7/0xf0 <4> [243.157180] ? do_syscall_64+0x34/0x6d0 <4> [243.157187] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e <4> [243.157195] ? trace_hardirqs_on+0x22/0xf0 <4> [243.157207] ? do_syscall_64+0xb8/0x6d0 <4> [243.157214] ? exc_page_fault+0xbd/0x2b0 <4> [243.157226] entry_SYSCALL_64_after_hwframe+0x76/0x7e <4> [243.157231] RIP: 0033:0x7d31cf71c5dd <4> [243.157242] Code: e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 88 bf f7 ff 48 8b 55 e8 48 8b 75 f0 41 89 c0 8b 7d f8 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 45 f8 e8 df bf f7 ff 48 8b <4> [243.157248] RSP: 002b:00007ffc8b0690c0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 <4> [243.157255] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007d31cf71c5dd <4> [243.157259] RDX: 0000000000000001 RSI: 00007ffc8b069150 RDI: 000000000000000a <4> [243.157263] RBP: 00007ffc8b0690e0 R08: 0000000000000000 R09: 0000000000000000 <4> [243.157267] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffc8b069150 <4> [243.157271] R13: 000000000000000a R14: 00007ffc8b069220 R15: 00007ffc8b069150 <4> [243.157293] </TASK> <4> [243.157299] irq event stamp: 85611 <4> [243.157302] hardirqs last enabled at (85617): [<ffffffff814ac629>] __up_console_sem+0x79/0xa0 <4> [243.157310] hardirqs last disabled at (85622): [<ffffffff814ac60e>] __up_console_sem+0x5e/0xa0 <4> [243.157317] softirqs last enabled at (85346): [<ffffffff813d333b>] __irq_exit_rcu+0xdb/0x1c0 <4> [243.157328] softirqs last disabled at (85341): [<ffffffff813d333b>] __irq_exit_rcu+0xdb/0x1c0 <4> [243.157336] ---[ end trace 0000000000000000 ]--- <7> [243.157345] xe 0000:00:02.0: [drm:bxt_disable_dc9 [xe]] Disabling DC9 <7> [243.157680] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 08 to 00 <7> [243.158049] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [243.158436] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [243.159834] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [243.160219] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [243.160653] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [243.161455] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [243.161819] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [243.172934] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [243.173039] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [243.173886] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [243.174190] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7> [243.174340] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [243.174433] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7> [243.174545] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [243.174628] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7> [243.174737] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [243.175508] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [243.175624] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [243.175714] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [243.175818] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [243.175908] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A] <7> [243.176016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [243.176136] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [243.176251] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [243.176392] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [243.176461] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [243.176527] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [243.176586] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [243.176644] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [243.176709] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [243.176765] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [243.176820] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [243.176890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1 <7> [243.176993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23529 required 1461 qgv_peak_bw: 38400 <7> [243.177088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36259 required 1461 qgv_peak_bw: 38400 <7> [243.177183] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [243.177272] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [243.177356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [243.177454] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [243.177548] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [243.177636] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [243.177719] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [243.177813] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0 <7> [243.177892] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7> [243.177980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [243.178077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [243.178171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [243.178263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [243.178347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [243.178431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [243.178512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [243.178594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [243.178675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [243.178756] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [243.178835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [243.178914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [243.179011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [243.179109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [243.179212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [243.179306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [243.179388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [243.179472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [243.179556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [243.179641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [243.179718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [243.179794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [243.179871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 37 vsync start: 103, vsync end: 97 <7> [243.179947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1869, vmax vblank: 1869, vmin vtotal: 1906, vmax vtotal: 1906 <7> [243.180045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [243.180130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [243.180213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [243.180294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [243.180371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [243.180446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [243.180523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7> [243.180599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [243.180678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [243.180757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7> [243.180836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [243.180914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [243.181005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [243.181091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [243.181176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7> [243.181260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [243.181344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [243.181428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [243.181507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [243.181584] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [243.181660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [243.181736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [243.181812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [243.181888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0 <7> [243.181969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries <7> [243.182053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [243.182136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.182218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.182296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.182371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [243.182445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [243.182521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.182596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.182671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.182746] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [243.182820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [243.182896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [243.182979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [243.183079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [243.183180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [243.183280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [243.183358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [243.183434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [243.183583] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [243.183839] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [243.184105] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [243.184258] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [243.184359] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [243.184442] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [243.184535] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [243.184612] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [243.184697] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7> [243.184770] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7> [243.184842] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7> [243.184912] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7> [243.184996] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7> [243.185072] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7> [243.185145] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7> [243.185218] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7> [243.185287] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7> [243.185351] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7> [243.185416] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7> [243.185479] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7> [243.185542] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7> [243.185626] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [243.185773] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [243.185834] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [243.185928] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [243.187009] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [243.187095] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [243.188643] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7> [243.188723] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (335 ms remaining) <7> [243.527189] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [243.537669] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [243.538132] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7> [243.538509] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [243.574759] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [243.575083] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [243.575508] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [243.752768] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [243.753182] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7> [243.753465] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [243.755408] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [243.756888] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [243.757650] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [243.758758] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [243.760128] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [243.761260] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7> [243.761622] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [243.763114] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [243.763466] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [243.764469] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [243.764995] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [243.765436] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [243.765916] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518 <7> [243.798717] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [243.800327] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7> [243.800670] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [243.804491] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [243.805735] [IGT] xe_pm: exiting, ret=77 <6> [243.815483] Console: switching to colour frame buffer device 180x56

Detail

Value

Duration

unknown

Hostname

shard-lnl-1

Igt-Version

IGT-Version: 2.4-gb0612a4a1 (x86_64) (Linux: 7.1.0-rc5-lgci-xe-xe-pw-167536v1-debug+ x86_64)

Out

Using IGT_SRANDOM=1780061590 for randomisation
Opened device: /dev/dri/card0
Starting subtest: d3cold-basic
Test requirement not met in function setup_d3, file ../tests/intel/xe_pm.c:176:
Test requirement: igt_pm_acpi_d3cold_supported(device.pci_root)
Last errno: 2, No such file or directory
Subtest d3cold-basic: SKIP (0.402s)

This test caused an abort condition: Kernel badly tainted (0x240, 0x200) (check dmesg for details):
	TAINT_WARN: WARN_ON has happened.

Err

Starting subtest: d3cold-basic
Subtest d3cold-basic: SKIP (0.402s)

Dmesg

Scroll to first warning

<6> [242.685666] Console: switching to colour dummy device 80x25

<6> [242.686343] [IGT] xe_pm: executing

<6> [242.733177] [IGT] xe_pm: starting subtest d3cold-basic

<7> [242.734353] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [242.734647] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [242.734849] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [242.735089] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [242.735280] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]

<7> [242.735463] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [242.735641] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [242.735811] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [242.736120] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [242.736259] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [242.736463] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [242.736620] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [242.736764] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [242.736906] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [242.737129] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]

<7> [242.737268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [242.737404] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [242.737537] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [242.737723] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [242.737877] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [242.738068] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [242.738186] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [242.738305] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]

<7> [242.738425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [242.738542] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [242.738655] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [242.738774] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [242.738875] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [242.738988] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [242.739068] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [242.739142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [242.739211] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [242.739280] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [242.739349] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [242.739435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [242.739558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 34060 required 0 qgv_peak_bw: 38400

<7> [242.739676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [242.739787] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [242.739885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [242.739987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [242.740121] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 0 kHz

<7> [242.740242] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [242.740349] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 153600 kHz

<7> [242.740440] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [242.740555] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0

<7> [242.740667] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0

<7> [242.740775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [242.740891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [242.740984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [242.741094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [242.741201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [242.741310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [242.741413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [242.741499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [242.741579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [242.741663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [242.741752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [242.741839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [242.741925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [242.742100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [242.742216] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [242.742331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [242.742433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [242.742516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [242.742594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [242.742680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [242.742765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [242.742850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [242.742927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 37 vsync start: 103, vsync end: 97

<7> [242.743015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1869, vmax vblank: 1869, vmin vtotal: 1906, vmax vtotal: 1906

<7> [242.743109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [242.743209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [242.743306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [242.743403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [242.743483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [242.743557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [242.743638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0

<7> [242.743734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [242.743829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [242.743925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0

<7> [242.744029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [242.744131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [242.744231] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [242.744334] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [242.744419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,

<7> [242.744499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [242.744577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [242.744654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [242.744740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [242.744827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [242.744912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [242.744996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [242.745088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [242.745188] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0

<7> [242.745287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries

<7> [242.745381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [242.745461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.745536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.745622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.745720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [242.745818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [242.745906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.746033] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.746143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.746254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [242.746358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [242.746442] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [242.746521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [242.746596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [242.746676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [242.746759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [242.746843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [242.746972] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [242.747090] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [242.747264] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [242.752572] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [242.752721] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [242.959177] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0

<7> [242.959728] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [242.969352] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off

<7> [242.969724] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [242.970138] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [243.022492] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [243.023067] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [243.023316] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [243.024240] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [243.024658] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [243.025031] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [243.025379] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]

<7> [243.025614] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]

<7> [243.025841] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]

<7> [243.026088] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]

<7> [243.026305] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]

<7> [243.026527] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]

<7> [243.026799] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]

<7> [243.027039] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]

<7> [243.027283] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]

<7> [243.027513] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]

<7> [243.027747] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]

<7> [243.027987] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]

<7> [243.028217] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]

<7> [243.028525] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [243.028765] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [243.029025] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [243.029484] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [243.029849] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [243.030350] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]

<7> [243.030717] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [243.031068] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [243.031457] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [243.031790] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [243.051031] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [243.051539] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [243.051945] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [243.052439] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [243.053375] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [243.054086] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x0

<7> [243.054801] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 0 (mbus joined: no)

<7> [243.055721] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_1

<4> [243.056803] ------------[ cut here ]------------

<4> [243.056809] xe 0000:00:02.0: [drm] Interrupts not disabled yet.

<4> [243.056813] WARNING: drivers/gpu/drm/i915/display/intel_display_power_well.c:699 at bxt_enable_dc9+0x151/0x200 [xe], CPU#3: kworker/u33:2/75

<4> [243.057216] Modules linked in: snd_hda_codec_intelhdmi snd_hda_codec_hdmi xe drm_gpuvm drm_gpusvm_helper drm_buddy gpu_sched drm_ttm_helper ttm drm_suballoc_helper drm_exec drm_display_helper cec rc_core drm_kunit_helpers i2c_algo_bit kunit hid_sensor_custom hid_sensor_hub hid_generic intel_rapl_msr intel_uncore_frequency intel_uncore_frequency_common x86_pkg_temp_thermal intel_powerclamp intel_ishtp_hid cmdlinepart hid coretemp spi_nor mtd mei_gsc_proxy wmi_bmof kvm_intel kvm irqbypass aesni_intel gf128mul snd_intel_dspcfg rapl snd_hda_codec intel_cstate snd_hda_core snd_hwdep ucsi_acpi r8169 snd_pcm typec_ucsi snd_timer typec spi_intel_pci realtek snd spi_intel phy_package soundcore video mei_me mei idma64 binfmt_misc intel_skl_int3472_tps68470 tps68470_regulator clk_tps68470 int3403_thermal intel_pmc_core processor_thermal_device_pci wmi processor_thermal_device processor_thermal_wt_hint intel_hid int3400_thermal platform_temperature_control sparse_keymap nls_iso8859_1 acpi_thermal_rel pinctrl_intel_platform

<4> [243.057561] processor_thermal_soc_slider pmt_telemetry intel_skl_int3472_discrete processor_thermal_rfim pmt_discovery intel_skl_int3472_common processor_thermal_rapl acpi_pad acpi_tad pmt_class intel_rapl_common processor_thermal_wt_req processor_thermal_power_floor intel_pmc_ssram_telemetry intel_ish_ipc processor_thermal_mbox thunderbolt int340x_thermal_zone intel_vsec intel_vpu intel_ishtp dm_multipath msr nvme_fabrics fuse efi_pstore nfnetlink autofs4 [last unloaded: snd_hda_intel]

<4> [243.057657] CPU: 3 UID: 0 PID: 75 Comm: kworker/u33:2 Tainted: G U 7.1.0-rc5-lgci-xe-xe-pw-167536v1-debug+ #1 PREEMPT(lazy)

<4> [243.057667] Tainted: [U]=USER

<4> [243.057672] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025

<4> [243.057678] Workqueue: pm pm_runtime_work

<4> [243.057694] RIP: 0010:bxt_enable_dc9+0x154/0x200 [xe]

<4> [243.058062] Code: 48 8b 3b 48 85 ff 74 04 48 8b 7f 08 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 f9 a0 25 e1 48 89 c6 48 8d 3d df c4 c5 ff 4c 89 e2 <67> 48 0f b9 3a e9 6a ff ff ff 48 8b 3b 48 85 ff 74 04 48 8b 7f 08

<4> [243.058070] RSP: 0018:ffffc900003c3b60 EFLAGS: 00010246

<4> [243.058080] RAX: ffffffffa12bc3ca RBX: ffff888125092000 RCX: 0000000000000000

<4> [243.058088] RDX: ffff8881096d8510 RSI: ffffffffa12bc3ca RDI: ffffffffa0c3d020

<4> [243.058093] RBP: ffffc900003c3b70 R08: 0000000000000000 R09: 0000000000000000

<4> [243.058098] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881096d8510

<4> [243.058102] R13: 0000000000000000 R14: ffff888126c0b1c8 R15: ffff888126c0b140

<4> [243.058106] FS: 0000000000000000(0000) GS:ffff8888db203000(0000) knlGS:0000000000000000

<4> [243.058111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033

<4> [243.058115] CR2: 000077ee93aca000 CR3: 0000000128bb8002 CR4: 0000000008f72ef0

<4> [243.058121] PKRU: 55555554

<4> [243.058125] Call Trace:

<4> [243.058128] <TASK>

<4> [243.058136] intel_display_power_runtime_suspend+0x85/0x90 [xe]

<4> [243.058479] intel_display_driver_pm_runtime_suspend+0xe/0x20 [xe]

<4> [243.058807] xe_display_pm_runtime_suspend+0x44/0x90 [xe]

<4> [243.059184] xe_pm_runtime_suspend+0x1ad/0x2d0 [xe]

<4> [243.059477] xe_pci_runtime_suspend+0x51/0x400 [xe]

<4> [243.059765] ? mark_held_locks+0x46/0x90

<4> [243.059777] ? __rpm_callback+0xa5/0x1f0

<4> [243.059787] ? __pfx_pci_pm_runtime_suspend+0x10/0x10

<4> [243.059803] pci_pm_runtime_suspend+0x6a/0x1e0

<4> [243.059812] ? __pfx_pci_pm_runtime_suspend+0x10/0x10

<4> [243.059821] __rpm_callback+0x4b/0x1f0

<7> [243.059636] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<4> [243.059829] ? lock_is_held_type+0xa3/0x130

<4> [243.059843] ? __pfx_pci_pm_runtime_suspend+0x10/0x10

<4> [243.059851] rpm_callback+0x6e/0x80

<4> [243.059860] ? __pfx_pci_pm_runtime_suspend+0x10/0x10

<4> [243.059868] rpm_suspend+0xf8/0x690

<4> [243.059880] ? _raw_spin_unlock_irqrestore+0x27/0x80

<4> [243.059895] ? rpm_idle+0x134/0x3e0

<4> [243.059903] ? __pfx_pci_pm_runtime_idle+0x10/0x10

<4> [243.059911] rpm_idle+0x286/0x3e0

<4> [243.059925] pm_runtime_work+0xaf/0xf0

<4> [243.059933] process_one_work+0x239/0x740

<4> [243.059958] worker_thread+0x200/0x3f0

<4> [243.059982] ? __pfx_worker_thread+0x10/0x10

<4> [243.059993] kthread+0x10d/0x150

<4> [243.060084] ? __pfx_kthread+0x10/0x10

<4> [243.060095] ret_from_fork+0x3bd/0x470

<4> [243.060105] ? __pfx_kthread+0x10/0x10

<4> [243.060113] ret_from_fork_asm+0x1a/0x30

<4> [243.060139] </TASK>

<4> [243.060142] irq event stamp: 1057265

<4> [243.060146] hardirqs last enabled at (1057271): [<ffffffff814ac629>] __up_console_sem+0x79/0xa0

<4> [243.060155] hardirqs last disabled at (1057276): [<ffffffff814ac60e>] __up_console_sem+0x5e/0xa0

<4> [243.060160] softirqs last enabled at (1056304): [<ffffffff813d333b>] __irq_exit_rcu+0xdb/0x1c0

<4> [243.060169] softirqs last disabled at (1056297): [<ffffffff813d333b>] __irq_exit_rcu+0xdb/0x1c0

<4> [243.060177] ---[ end trace 0000000000000000 ]---

<7> [243.060013] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [243.060183] xe 0000:00:02.0: [drm:bxt_enable_dc9 [xe]] Enabling DC9

<7> [243.060380] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [243.060503] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 08

<6> [243.136032] [IGT] xe_pm: finished subtest d3cold-basic, SKIP

<4> [243.153023] ------------[ cut here ]------------

<4> [243.153103] xe 0000:00:02.0: [drm] Interrupts not disabled yet.

<4> [243.153109] WARNING: drivers/gpu/drm/i915/display/intel_display_power_well.c:713 at bxt_disable_dc9+0xcb/0x110 [xe], CPU#0: xe_pm/6609

<4> [243.153546] Modules linked in: snd_hda_codec_intelhdmi snd_hda_codec_hdmi xe drm_gpuvm drm_gpusvm_helper drm_buddy gpu_sched drm_ttm_helper ttm drm_suballoc_helper drm_exec drm_display_helper cec rc_core drm_kunit_helpers i2c_algo_bit kunit hid_sensor_custom hid_sensor_hub hid_generic intel_rapl_msr intel_uncore_frequency intel_uncore_frequency_common x86_pkg_temp_thermal intel_powerclamp intel_ishtp_hid cmdlinepart hid coretemp spi_nor mtd mei_gsc_proxy wmi_bmof kvm_intel kvm irqbypass aesni_intel gf128mul snd_intel_dspcfg rapl snd_hda_codec intel_cstate snd_hda_core snd_hwdep ucsi_acpi r8169 snd_pcm typec_ucsi snd_timer typec spi_intel_pci realtek snd spi_intel phy_package soundcore video mei_me mei idma64 binfmt_misc intel_skl_int3472_tps68470 tps68470_regulator clk_tps68470 int3403_thermal intel_pmc_core processor_thermal_device_pci wmi processor_thermal_device processor_thermal_wt_hint intel_hid int3400_thermal platform_temperature_control sparse_keymap nls_iso8859_1 acpi_thermal_rel pinctrl_intel_platform

<4> [243.153864] processor_thermal_soc_slider pmt_telemetry intel_skl_int3472_discrete processor_thermal_rfim pmt_discovery intel_skl_int3472_common processor_thermal_rapl acpi_pad acpi_tad pmt_class intel_rapl_common processor_thermal_wt_req processor_thermal_power_floor intel_pmc_ssram_telemetry intel_ish_ipc processor_thermal_mbox thunderbolt int340x_thermal_zone intel_vsec intel_vpu intel_ishtp dm_multipath msr nvme_fabrics fuse efi_pstore nfnetlink autofs4 [last unloaded: snd_hda_intel]

<4> [243.154482] CPU: 0 UID: 0 PID: 6609 Comm: xe_pm Tainted: G U W 7.1.0-rc5-lgci-xe-xe-pw-167536v1-debug+ #1 PREEMPT(lazy)

<4> [243.154496] Tainted: [U]=USER, [W]=WARN

<4> [243.154502] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025

<4> [243.154507] RIP: 0010:bxt_disable_dc9+0xce/0x110 [xe]

<4> [243.154899] Code: 48 8b 3b 48 85 ff 74 04 48 8b 7f 08 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 6f 9f 25 e1 48 89 c6 48 8d 3d 95 c3 c5 ff 4c 89 e2 <67> 48 0f b9 3a e9 44 ff ff ff 48 8b 3b 48 85 ff 74 04 48 8b 7f 08

<4> [243.154906] RSP: 0018:ffffc90003f67988 EFLAGS: 00010246

<4> [243.154914] RAX: ffffffffa12bc3ca RBX: ffff888125092000 RCX: 0000000000000000

<4> [243.154919] RDX: ffff8881096d8510 RSI: ffffffffa12bc3ca RDI: ffffffffa0c3d060

<4> [243.154923] RBP: ffffc90003f67998 R08: 0000000000000000 R09: 0000000000000000

<4> [243.154927] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881096d8510

<4> [243.154931] R13: 0000000000000000 R14: 0000000000000003 R15: ffff888109bc10d0

<4> [243.154935] FS: 00007d31cd7ba940(0000) GS:ffff8888db083000(0000) knlGS:0000000000000000

<4> [243.154940] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033

<4> [243.154945] CR2: 00007d31cfa82450 CR3: 0000000110070003 CR4: 0000000008f72ef0

<4> [243.154950] PKRU: 55555554

<4> [243.154953] Call Trace:

<4> [243.154974] <TASK>

<4> [243.154983] intel_display_power_runtime_resume+0x79/0xf0 [xe]

<4> [243.155369] intel_display_driver_pm_runtime_resume_early+0x1c/0x30 [xe]

<4> [243.155767] xe_display_pm_runtime_resume+0x44/0xc0 [xe]

<4> [243.156172] xe_pm_runtime_resume+0x2bc/0x470 [xe]

<4> [243.156483] xe_pci_runtime_resume+0x73/0x90 [xe]

<4> [243.156827] pci_pm_runtime_resume+0x97/0xf0

<4> [243.156841] ? __pfx_pci_pm_runtime_resume+0x10/0x10

<4> [243.156851] __rpm_callback+0x4b/0x1f0

<4> [243.156863] ? lock_release+0xd0/0x2b0

<4> [243.156875] ? __pfx_pci_pm_runtime_resume+0x10/0x10

<4> [243.156885] rpm_callback+0x6e/0x80

<4> [243.156893] ? __pfx_pci_pm_runtime_resume+0x10/0x10

<4> [243.156902] rpm_resume+0x58c/0x790

<4> [243.156920] __pm_runtime_resume+0x4e/0x90

<4> [243.156933] d3cold_allowed_store+0x68/0xa0

<4> [243.156944] dev_attr_store+0x17/0x40

<4> [243.156956] sysfs_kf_write+0x4d/0x80

<4> [243.156991] kernfs_fop_write_iter+0x188/0x240

<4> [243.157010] vfs_write+0x283/0x540

<4> [243.157039] ksys_write+0x6f/0xf0

<4> [243.157054] __x64_sys_write+0x19/0x30

<4> [243.157065] x64_sys_call+0x259/0x26e0

<4> [243.157081] do_syscall_64+0x103/0x6d0

<4> [243.157093] ? do_syscall_64+0x23d/0x6d0

<4> [243.157104] ? rcu_read_unlock+0x1c/0x80

<4> [243.157115] ? lock_release+0xd0/0x2b0

<4> [243.157132] ? find_held_lock+0x31/0x90

<4> [243.157139] ? exc_page_fault+0x96/0x2b0

<4> [243.157151] ? lock_release+0xd0/0x2b0

<4> [243.157164] ? trace_hardirqs_on_prepare+0xd7/0xf0

<4> [243.157180] ? do_syscall_64+0x34/0x6d0

<4> [243.157187] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e

<4> [243.157195] ? trace_hardirqs_on+0x22/0xf0

<4> [243.157207] ? do_syscall_64+0xb8/0x6d0

<4> [243.157214] ? exc_page_fault+0xbd/0x2b0

<4> [243.157226] entry_SYSCALL_64_after_hwframe+0x76/0x7e

<4> [243.157231] RIP: 0033:0x7d31cf71c5dd

<4> [243.157242] Code: e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 88 bf f7 ff 48 8b 55 e8 48 8b 75 f0 41 89 c0 8b 7d f8 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 45 f8 e8 df bf f7 ff 48 8b

<4> [243.157248] RSP: 002b:00007ffc8b0690c0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001

<4> [243.157255] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007d31cf71c5dd

<4> [243.157259] RDX: 0000000000000001 RSI: 00007ffc8b069150 RDI: 000000000000000a

<4> [243.157263] RBP: 00007ffc8b0690e0 R08: 0000000000000000 R09: 0000000000000000

<4> [243.157267] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffc8b069150

<4> [243.157271] R13: 000000000000000a R14: 00007ffc8b069220 R15: 00007ffc8b069150

<4> [243.157293] </TASK>

<4> [243.157299] irq event stamp: 85611

<4> [243.157302] hardirqs last enabled at (85617): [<ffffffff814ac629>] __up_console_sem+0x79/0xa0

<4> [243.157310] hardirqs last disabled at (85622): [<ffffffff814ac60e>] __up_console_sem+0x5e/0xa0

<4> [243.157317] softirqs last enabled at (85346): [<ffffffff813d333b>] __irq_exit_rcu+0xdb/0x1c0

<4> [243.157328] softirqs last disabled at (85341): [<ffffffff813d333b>] __irq_exit_rcu+0xdb/0x1c0

<4> [243.157336] ---[ end trace 0000000000000000 ]---

<7> [243.157345] xe 0000:00:02.0: [drm:bxt_disable_dc9 [xe]] Disabling DC9

<7> [243.157680] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 08 to 00

<7> [243.158049] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [243.158436] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [243.159834] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [243.160219] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [243.160653] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [243.161455] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [243.161819] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [243.172934] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [243.173039] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [243.173886] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [243.174190] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1]

<7> [243.174340] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [243.174433] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2]

<7> [243.174545] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [243.174628] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3]

<7> [243.174737] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [243.175508] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [243.175624] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [243.175714] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [243.175818] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [243.175908] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]

<7> [243.176016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [243.176136] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [243.176251] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [243.176392] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [243.176461] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [243.176527] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [243.176586] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [243.176644] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [243.176709] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [243.176765] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [243.176820] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [243.176890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1

<7> [243.176993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23529 required 1461 qgv_peak_bw: 38400

<7> [243.177088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36259 required 1461 qgv_peak_bw: 38400

<7> [243.177183] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [243.177272] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [243.177356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [243.177454] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [243.177548] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [243.177636] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [243.177719] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [243.177813] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0

<7> [243.177892] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0

<7> [243.177980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [243.178077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [243.178171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [243.178263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [243.178347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [243.178431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [243.178512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [243.178594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [243.178675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [243.178756] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [243.178835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [243.178914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [243.179011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [243.179109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [243.179212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [243.179306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [243.179388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [243.179472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [243.179556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [243.179641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [243.179718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [243.179794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [243.179871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 37 vsync start: 103, vsync end: 97

<7> [243.179947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1869, vmax vblank: 1869, vmin vtotal: 1906, vmax vtotal: 1906

<7> [243.180045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [243.180130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [243.180213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [243.180294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [243.180371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [243.180446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [243.180523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0

<7> [243.180599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [243.180678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [243.180757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0

<7> [243.180836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [243.180914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [243.181005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [243.181091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [243.181176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,

<7> [243.181260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [243.181344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [243.181428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [243.181507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [243.181584] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [243.181660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [243.181736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [243.181812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [243.181888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0

<7> [243.181969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries

<7> [243.182053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [243.182136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.182218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.182296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.182371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [243.182445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [243.182521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.182596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.182671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.182746] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [243.182820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [243.182896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [243.182979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [243.183079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [243.183180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [243.183280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [243.183358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [243.183434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [243.183583] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [243.183839] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [243.184105] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [243.184258] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [243.184359] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [243.184442] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [243.184535] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [243.184612] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [243.184697] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]

<7> [243.184770] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]

<7> [243.184842] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]

<7> [243.184912] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]

<7> [243.184996] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]

<7> [243.185072] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]

<7> [243.185145] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]

<7> [243.185218] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]

<7> [243.185287] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]

<7> [243.185351] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]

<7> [243.185416] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]

<7> [243.185479] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]

<7> [243.185542] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]

<7> [243.185626] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [243.185773] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [243.185834] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [243.185928] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [243.187009] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [243.187095] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [243.188643] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on

<7> [243.188723] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (335 ms remaining)

<7> [243.527189] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [243.537669] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [243.538132] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on

<7> [243.538509] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [243.574759] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [243.575083] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [243.575508] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [243.752768] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [243.753182] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on

<7> [243.753465] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [243.755408] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [243.756888] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [243.757650] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [243.758758] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [243.760128] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [243.761260] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK

<7> [243.761622] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [243.763114] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [243.763466] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [243.764469] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [243.764995] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [243.765436] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [243.765916] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518

<7> [243.798717] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [243.800327] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]

<7> [243.800670] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [243.804491] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [243.805735] [IGT] xe_pm: exiting, ret=77

<6> [243.815483] Console: switching to colour frame buffer device 180x56

Created at 2026-05-29 13:57:47