Results for igt@kms_vrr@seamless-rr-switch-virtual@pipe-a-edp-1

Result: Fail

i915_display_info13 igt_runner13 results13.json results13-xe-load.json guc_logs13.tar i915_display_info_post_exec13 boot13 dmesg13

DetailValue
Duration 6.34 seconds
Hostname 
shard-lnl-1
Igt-Version 
IGT-Version: 2.3-gb2f96bfbc (x86_64) (Linux: 7.0.0-rc5-lgci-xe-xe-pw-163731v1-debug+ x86_64)
Out 
Using IGT_SRANDOM=1774324685 for randomisation
Opened device: /dev/dri/card0
Starting subtest: seamless-rr-switch-virtual
Default Mode:   2880x1800: 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa 
Starting dynamic subtest: pipe-A-eDP-1
Use HIGH_RR Mode as default
  2880x1800: 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa 
Requested rate[0]: 8333333 ns (120.00 Hz), Expected rate between: 8264462 ns (121.00 Hz) to 8403361 ns (119.00 Hz)
Completed 561 flips, 0 were in threshold for [(120 Hz) 8333333ns]
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 ../tests/kms_vrr.c:847 test_seamless_virtual_rr_basic()
  #2 ../tests/kms_vrr.c:1119 run_vrr_test.constprop.0()
  #3 ../tests/kms_vrr.c:1226 __igt_unique____real_main1167()
  #4 ../tests/kms_vrr.c:1167 main()
  #5 [__libc_init_first+0x8a]
  #6 [__libc_start_main+0x8b]
  #7 [_start+0x25]
Dynamic subtest pipe-A-eDP-1: FAIL (6.340s)
Subtest seamless-rr-switch-virtual: FAIL (6.632s)
Err 
Starting subtest: seamless-rr-switch-virtual
Starting dynamic subtest: pipe-A-eDP-1
(kms_vrr:10532) CRITICAL: Test assertion failure function test_seamless_virtual_rr_basic, file ../tests/kms_vrr.c:850:
(kms_vrr:10532) CRITICAL: Failed assertion: result > 75
(kms_vrr:10532) CRITICAL: Refresh rate (120 Hz) 8333333ns: Target threshold not reached, result was 0%
Dynamic subtest pipe-A-eDP-1 failed.
**** DEBUG ****
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) DEBUG: event_ns - last_event_ns: 16465000 (60.73 Hz)
(kms_vrr:10532) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_vrr:10532) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:10532) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:10532) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) DEBUG: event_ns - last_event_ns: 16460000 (60.75 Hz)
(kms_vrr:10532) igt_kms-DEBUG: display: A.0: plane_set_fb(433)
(kms_vrr:10532) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:10532) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:10532) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) igt_kms-DEBUG: display: commit {
(kms_vrr:10532) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:10532) igt_kms-DEBUG: display: }
(kms_vrr:10532) DEBUG: event_ns - last_event_ns: 16462000 (60.75 Hz)
(kms_vrr:10532) INFO: Completed 561 flips, 0 were in threshold for [(120 Hz) 8333333ns]
(kms_vrr:10532) CRITICAL: Test assertion failure function test_seamless_virtual_rr_basic, file ../tests/kms_vrr.c:850:
(kms_vrr:10532) CRITICAL: Failed assertion: result > 75
(kms_vrr:10532) CRITICAL: Refresh rate (120 Hz) 8333333ns: Target threshold not reached, result was 0%
(kms_vrr:10532) igt_core-INFO: Stack trace:
(kms_vrr:10532) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_vrr:10532) igt_core-INFO:   #1 ../tests/kms_vrr.c:847 test_seamless_virtual_rr_basic()
(kms_vrr:10532) igt_core-INFO:   #2 ../tests/kms_vrr.c:1119 run_vrr_test.constprop.0()
(kms_vrr:10532) igt_core-INFO:   #3 ../tests/kms_vrr.c:1226 __igt_unique____real_main1167()
(kms_vrr:10532) igt_core-INFO:   #4 ../tests/kms_vrr.c:1167 main()
(kms_vrr:10532) igt_core-INFO:   #5 [__libc_init_first+0x8a]
(kms_vrr:10532) igt_core-INFO:   #6 [__libc_start_main+0x8b]
(kms_vrr:10532) igt_core-INFO:   #7 [_start+0x25]
****  END  ****
Dynamic subtest pipe-A-eDP-1: FAIL (6.340s)
Subtest seamless-rr-switch-virtual: FAIL (6.632s)
Dmesg
<6> [500.831226] Console: switching to colour dummy device 80x25
<6> [500.831670] [IGT] kms_vrr: executing
<7> [500.837467] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]
<7> [500.837479] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1]
<7> [500.837648] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected
<7> [500.837876] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2]
<7> [500.837878] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2]
<7> [500.838002] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected
<7> [500.838208] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3]
<7> [500.838210] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3]
<7> [500.838338] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected
<7> [500.838665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1]
<7> [500.838669] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1]
<7> [500.839129] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [500.839447] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [500.839559] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [500.839665] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [500.839786] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [500.839791] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [500.839792] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [500.839793] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00
<7> [500.839796] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [500.839798] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [500.839800] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor
<5> [500.839802] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [500.839804] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0
<5> [500.839806] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [500.839820] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes
<7> [500.840068] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [500.840308] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [500.840862] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [500.840868] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [500.840872] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [500.840964] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes:
<7> [500.840968] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [500.840972] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [500.840987] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]
<7> [500.840990] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1]
<7> [500.841126] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected
<7> [500.841134] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2]
<7> [500.841137] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2]
<7> [500.841264] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected
<7> [500.841273] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3]
<7> [500.841275] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3]
<7> [500.841413] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected
<6> [500.841771] [IGT] kms_vrr: starting subtest seamless-rr-switch-virtual
<6> [500.842874] [IGT] kms_vrr: starting dynamic subtest pipe-A-eDP-1
<7> [500.849481] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [500.869344] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [500.914477] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [500.914608] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 695310 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [500.914718] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2607413 available 3240000
<7> [500.914827] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [500.914942] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [500.915039] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 64, data 6750791/8388608 link 450052/524288)
<7> [500.915135] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state
<7> [500.915228] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [500.915318] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [500.915408] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [500.915497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [500.915578] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [500.915659] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [500.915829] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [500.915944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [500.916044] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [500.916134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [500.916216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [500.916311] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [500.916409] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [500.916509] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,
<7> [500.916601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 61440, rem: 0, den: 1,
<7> [500.916685] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 210, tx_clk_div: 0.
<7> [500.916803] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [500.916902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [500.916999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [500.917081] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [500.917162] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [500.917244] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [500.917325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [500.917406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 695309)
<7> [500.917491] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 695309)
<7> [500.917576] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 810000)
<7> [500.917660] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1)
<7> [500.917764] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [500.917865] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0
<7> [500.918000] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4051) -> ( 0 - 4011), size 4051 -> 4011
<7> [500.918079] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> (4011 - 4096), size 45 -> 85
<7> [500.918155] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [500.918230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 2, 25, 25, 25, 25, 25, 0, 0, 0, 5, 0
<7> [500.918305] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 49, 601, 601, 601, 601, 601, 0, 0, 63, 121, 135
<7> [500.918379] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 55, 663, 663, 663, 663, 663, 0, 0, 64, 135, 136
<7> [500.918463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 2781236 num active planes 1
<7> [500.918548] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [500.918629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [500.918709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [500.918816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [500.918921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [500.919044] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 173855 kHz -> 347655 kHz
<7> [500.919160] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 43457 kHz
<7> [500.919253] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via crawling and squashing
<7> [500.919339] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 360000 kHz, actual 360000 kHz
<7> [500.919425] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 1, actual 1
<7> [500.919523] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [500.919603] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [500.919694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [500.919785] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [500.919980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [500.920093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [500.920209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [500.920309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [500.920393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [500.920470] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6750791, data_n: 8388608, link_m: 450052, link_n: 524288, tu: 64
<7> [500.920551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [500.920633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [500.920716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [500.920798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [500.920908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [500.921007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [500.921105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [500.921186] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [500.921260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [500.921333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [500.921411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [500.921492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [500.921572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [500.921652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [500.921732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [500.921826] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [500.921932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [500.922029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [500.922123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [500.922205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [500.922285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 120 695309 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [500.922364] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [500.922443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pipe src: 2880x1800+0+0, pixel rate 695309, min cdclk 347655
<7> [500.922521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 35, ips linetime: 0
<7> [500.922605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [500.922696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [500.922788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [500.922883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [500.923000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,
<7> [500.923098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1,
<7> [500.923190] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0.
<7> [500.923271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [500.923352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [500.923431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [500.923511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [500.923591] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [500.923670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [500.923749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [500.923822] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [500.923894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [500.924056] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [500.924151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [500.924239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [500.924317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [500.924394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [500.924484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [500.924575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [500.924667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [500.924753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [500.924831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [500.924906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [500.925215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:432] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [500.925317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [500.925402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [500.925480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [500.925556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [500.925633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [500.925711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [500.925788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [500.927950] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [500.928667] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [500.928790] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [500.929519] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [500.929629] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [501.143023] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [501.143634] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [501.145933] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [501.146263] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [501.146587] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [501.198755] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [501.199310] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [501.203503] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [501.203896] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [501.203938] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [501.205321] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [501.205767] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [501.206211] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1801071 0x16832a72)
<7> [501.206583] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 360000 kHz, VCO 960000 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 1
<7> [501.206998] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)
<7> [501.207272] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=900
<7> [501.207644] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [501.207922] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [501.208187] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [501.208450] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [501.208740] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [501.209019] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [501.209275] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [501.209528] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [501.209874] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [501.210137] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [501.210386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [501.210636] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [501.210933] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [501.211197] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]
<7> [501.211443] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]
<7> [501.211695] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]
<7> [501.212053] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [501.213556] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [501.213781] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [501.215934] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [501.216107] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [501.236507] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [501.236853] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [501.237169] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [501.237507] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [501.726709] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [501.815915] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [501.816239] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [501.816504] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [501.853117] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [501.853866] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [501.854452] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [501.855174] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [501.907381] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [501.907455] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [501.907560] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [502.022250] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [502.022595] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [502.022862] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [502.024976] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [502.026476] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [502.027217] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [502.028342] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [502.029646] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [502.030698] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [502.031006] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [502.032405] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [502.032706] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 810000, lane count = 4
<7> [502.033373] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [502.033783] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [502.034050] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [502.034331] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000
<7> [502.042226] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [502.043876] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [502.044203] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [502.047906] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [504.654498] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off
<7> [504.654686] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [507.177169] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [507.177336] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [507.177440] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6> [507.183257] [IGT] kms_vrr: finished subtest pipe-A-eDP-1, FAIL
<7> [507.183589] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [507.183699] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [507.183792] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [507.183881] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [507.183971] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6750791/8388608 link 450052/524288, found tu 0, data 0/0 link 0/0)
<7> [507.184074] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [507.184174] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [507.184269] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [507.184362] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [507.184448] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [507.184531] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [507.184614] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [507.184696] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [507.184778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [507.184860] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [507.184940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [507.185021] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [507.185114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [507.185214] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [507.185302] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [507.185386] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [507.185467] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [507.185550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [507.185636] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [507.185719] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [507.185803] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [507.185881] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [507.185958] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [507.186040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [507.186133] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [507.186226] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [507.186308] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [507.186389] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [507.186463] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [507.186544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [507.186625] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 695309, found 0)
<7> [507.186705] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 695309, found 0)
<7> [507.186787] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 810000, found 0)
<7> [507.186866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0)
<7> [507.186948] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [507.187027] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0
<7> [507.187182] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [507.187266] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [507.187352] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4011) -> ( 0 - 0), size 4011 -> 0
<7> [507.187413] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4011 - 4096) -> ( 0 - 0), size 85 -> 0
<7> [507.187470] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [507.187526] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 2, 25, 25, 25, 25, 25, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [507.187583] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 49, 601, 601, 601, 601, 601, 0, 0, 63, 121, 135 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [507.187642] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 55, 663, 663, 663, 663, 663, 0, 0, 64, 135, 136 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [507.187716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [507.187817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [507.187918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [507.188010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [507.188097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [507.188200] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [507.188294] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 347655 kHz -> 0 kHz
<7> [507.188398] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 43457 kHz -> 0 kHz
<7> [507.188490] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via crawling and squashing
<7> [507.188577] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [507.188658] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [507.188759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset]
<7> [507.188847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no
<7> [507.188934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [507.189020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [507.189098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [507.189197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [507.189284] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [507.189406] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [507.189511] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [507.189653] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [507.192418] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [507.192551] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [507.193159] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [507.193272] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [507.398884] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [507.399417] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [507.400800] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [507.401048] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [507.401298] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [507.401265] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [507.401892] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [507.453687] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [507.454161] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [507.456542] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [507.456943] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [507.457048] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [507.457505] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [507.458393] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [507.458853] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [507.459284] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [507.459619] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [507.459895] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [507.460169] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [507.460440] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [507.460750] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [507.461014] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [507.461268] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [507.461584] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [507.461835] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [507.462088] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [507.462341] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [507.462668] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [507.462917] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [507.463247] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)
<7> [507.463529] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [507.463767] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [507.464228] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [507.464601] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [507.465062] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [507.465390] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [507.465794] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [507.467262] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [507.475070] [IGT] kms_vrr: finished subtest seamless-rr-switch-virtual, FAIL
<7> [507.476252] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [507.476503] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [507.476732] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [507.476939] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [507.477138] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [507.477330] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [507.477513] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [507.477697] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [507.477879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [507.478102] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [507.478323] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [507.478545] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [507.478785] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [507.478983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [507.479139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [507.479300] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [507.479459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [507.479593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [507.479755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [507.479914] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [507.480064] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [507.480201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [507.480324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [507.480436] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [507.480546] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [507.480651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [507.480954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [507.481098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [507.481216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [507.481315] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [507.481410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [507.481504] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [507.481596] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [507.481687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [507.481805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [507.481907] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [507.482016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [507.482130] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [507.482215] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [507.482301] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state
<7> [507.482386] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [507.482466] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [507.482545] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,
<7> [507.482624] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 61440, rem: 0, den: 1,
<7> [507.482702] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 210, tx_clk_div: 0.
<7> [507.482810] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [507.482906] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [507.482999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [507.483082] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [507.483156] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [507.483229] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [507.483318] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [507.483402] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [507.483475] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [507.483547] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [507.483617] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [507.483689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [507.483783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [507.483882] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [507.483977] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [507.484076] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [507.484173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [507.484253] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [507.484326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [507.484402] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [507.484483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [507.484560] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [507.484638] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [507.484786] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [507.484888] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [507.484980] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [507.485079] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [507.485155] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [507.485215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [507.485273] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [507.485329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [507.485406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1
<7> [507.485502] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [507.485596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [507.485687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [507.485842] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [507.486001] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [507.486035] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [507.486124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [507.486165] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [507.486235] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [507.486314] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [507.486360] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz
<7> [507.486458] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [507.486576] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [507.486697] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [507.486833] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [507.486959] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [507.487082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [507.487177] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [507.487258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [507.487353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [507.487452] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [507.487547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [507.487632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [507.487712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [507.487791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [507.487886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [507.487980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [507.488074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [507.488154] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [507.488230] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [507.488307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [507.488382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [507.488455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [507.488539] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [507.488627] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [507.488715] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [507.488797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [507.488892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [507.488983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [507.489077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [507.489159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [507.489232] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [507.489303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [507.489374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [507.489445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [507.489515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [507.489585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [507.489655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [507.489725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [507.489795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [507.489988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [507.490105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [507.490215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [507.490301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [507.490373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [507.490445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [507.490516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [507.490588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [507.490659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [507.490642] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [507.490732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [507.490754] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [507.490806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [507.490845] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [507.490919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [507.490946] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [507.491016] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [507.491109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [507.491200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.491285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.491362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.491432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [507.491503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [507.491571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.491644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.491718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.491788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [507.491877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [507.491971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [507.492064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [507.492156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [507.492233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [507.492302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [507.492371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [507.492441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [507.492513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [507.492654] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [507.492772] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [507.493042] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [507.493209] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [507.493347] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [507.493473] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7> [507.493564] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [507.493660] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [507.493751] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [507.493834] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [507.493959] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [507.494059] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [507.494152] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [507.494251] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [507.494329] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [507.494400] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [507.494468] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [507.494534] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [507.494600] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [507.494667] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [507.494735] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [507.494800] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [507.494894] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [507.495083] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [507.495175] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [507.495299] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [507.496632] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [507.496738] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [507.498704] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [507.498786] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (459 ms remaining)
<7> [507.965953] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [507.986569] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [507.987024] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [507.987406] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [508.023722] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [508.024217] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [508.024603] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [508.025044] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [508.202455] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [508.202833] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [508.203162] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [508.205583] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [508.207152] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [508.208020] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [508.209252] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [508.210618] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [508.211790] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [508.212212] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [508.213726] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [508.214123] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [508.214978] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [508.215526] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [508.215902] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [508.216304] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000
<7> [508.232389] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [508.234107] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [508.234511] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [508.237609] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [508.238939] [IGT] kms_vrr: exiting, ret=98
<6> [508.249316] Console: switching to colour frame buffer device 180x56
Created at 2026-03-24 04:26:11