<5>[ 0.000000] Linux version 7.0.0-rc6-lgci-xe-xe-pw-162055v5-debug+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Mon Apr 6 14:26:52 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x0000000080800000-0x00000000bfffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000d0000000-0x00000000fed1ffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed80000-0x00000000ff1fffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] System RAM <6>[ 0.000000] printk: legacy bootconsole [earlyser0] enabled <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] device reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] device reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.004104] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.004108] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.009608] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.018078] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.025327] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.030863] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.040770] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.048497] e820: update [mem 0x68ff8000-0x68ff8fff] System RAM ==> device reserved <6>[ 0.048516] Using GB pages for direct mapping <6>[ 0.053564] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.061021] printk: early log buf free: 258376(98%) <6>[ 0.065914] Secure boot disabled <6>[ 0.069141] ACPI: Early table checksum verification disabled <6>[ 0.074818] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.080578] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.089141] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.097695] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.106251] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.110878] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.119438] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.127998] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.136554] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.145114] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.153673] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.162228] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.170790] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.179345] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.187909] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.196461] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.205020] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.213578] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.222138] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.230701] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.239256] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.247814] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.256370] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.264928] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.273485] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.282042] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.290600] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.299158] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.307719] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.316277] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.324834] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.333390] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.341947] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.350506] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.359064] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.367622] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.376179] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.384743] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.393298] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.401857] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.410413] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.418971] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.427533] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.436091] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.444646] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.453206] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.461766] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.470323] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.478879] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.487438] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.495991] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.503067] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.510139] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.517214] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.524285] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.531360] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.538435] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.545509] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.552581] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.559655] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.566725] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.573799] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.580872] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.587945] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.595020] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.602095] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.609166] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.616243] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.623314] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.630388] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.637462] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.644534] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.651607] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.658684] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.665755] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.672829] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.679900] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.686974] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.694047] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.701120] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.708196] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.715270] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.722340] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.729419] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.736488] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.743564] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.750638] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.757713] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.764786] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.771858] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.778930] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.786006] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.793077] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.800154] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.807228] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.814301] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.821372] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.828445] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.835589] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.841230] No NUMA configuration found <6>[ 0.844933] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.851663] NODE_DATA(0) allocated [mem 0x87f292e40-0x87f2bdfff] <6>[ 0.858253] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.862218] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.868553] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.875492] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.881867] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.888503] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.894968] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.900126] e820: update [mem 0x6992d000-0x69947fff] System RAM ==> device reserved <6>[ 0.900132] TSC deadline timer available <6>[ 0.904048] CPU topo: Max. logical packages: 1 <6>[ 0.908679] CPU topo: Max. logical nodes: 1 <6>[ 0.913305] CPU topo: Num. nodes per package: 1 <6>[ 0.917932] CPU topo: Max. logical dies: 1 <6>[ 0.922564] CPU topo: Max. dies per package: 1 <6>[ 0.927190] CPU topo: Max. threads per core: 1 <6>[ 0.931817] CPU topo: Num. cores per package: 8 <6>[ 0.936707] CPU topo: Num. threads per package: 8 <6>[ 0.941597] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.947722] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.955308] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.962904] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.970503] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.978099] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.985698] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.993381] [gap 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.999494] Booting paravirtualized kernel on bare hardware <6>[ 1.005087] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 1.015598] Zone ranges: <6>[ 1.018095] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 1.024297] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 1.030497] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 1.036697] Device empty <6>[ 1.039581] Movable zone start for each node <6>[ 1.043859] Early memory node ranges <6>[ 1.047439] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 1.053723] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 1.060012] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 1.066299] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 1.072586] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 1.079663] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 1.085524] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 1.093038] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 1.127170] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 1.133502] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 1.139876] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 1.147892] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 1.154398] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 1.154400] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 1.154418] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 ro <7>[ 1.194052] blacklisting initcall simpledrm_platform_driver_init <5>[ 1.194085] random: crng init done <6>[ 1.199197] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 1.208092] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 1.216049] software IO TLB: area num 8. <6>[ 1.227269] Fallback order for Node 0: 0 <6>[ 1.227273] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 1.238049] Policy zone: Normal <6>[ 1.241202] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 1.247394] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 1.254207] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 1.263074] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 1.301632] ********************************************************** <4>[ 1.308043] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 1.314594] ** ** <4>[ 1.321143] ** This system shows unhashed kernel memory addresses ** <4>[ 1.327692] ** via the console, logs, and other interfaces. This ** <4>[ 1.334246] ** might reduce the security of your system. ** <4>[ 1.340794] ** ** <4>[ 1.347341] ** If you see this message and you are not debugging ** <4>[ 1.353891] ** the kernel, report this immediately to your system ** <4>[ 1.360441] ** administrator! ** <4>[ 1.366989] ** ** <4>[ 1.373541] ** Use hash_pointers=always to force this mode off ** <4>[ 1.380090] ** ** <4>[ 1.386640] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 1.393192] ********************************************************** <6>[ 1.400807] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 1.415609] ftrace: allocating 61452 entries in 242 pages <6>[ 1.420885] ftrace: allocated 242 pages with 5 groups <6>[ 1.427010] Dynamic Preempt: lazy <6>[ 1.430695] Running RCU self tests <6>[ 1.433965] Running RCU synchronous self tests <6>[ 1.438414] rcu: Preemptible hierarchical RCU implementation. <6>[ 1.444178] rcu: RCU lockdep checking is enabled. <6>[ 1.448982] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 1.455794] Trampoline variant of Tasks RCU enabled. <6>[ 1.460858] Rude variant of Tasks RCU enabled. <6>[ 1.465399] Tracing variant of Tasks RCU enabled. <6>[ 1.470200] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 1.477888] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 1.484679] Running RCU synchronous self tests <6>[ 1.489071] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 1.497799] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 1.518147] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 1.524594] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 1.531769] Console: colour dummy device 80x25 <6>[ 1.536085] printk: legacy console [tty0] enabled <6>[ 1.542021] printk: legacy console [ttyS0] enabled <6>[ 1.551527] printk: legacy bootconsole [earlyser0] disabled <6>[ 1.562733] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 1.570672] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 1.574818] ... MAX_LOCK_DEPTH: 48 <6>[ 1.579041] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 1.583443] ... CLASSHASH_SIZE: 4096 <6>[ 1.587845] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 1.592425] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 1.597003] ... CHAINHASH_SIZE: 262144 <6>[ 1.601578] memory used by lock dependency info: 54145 kB <6>[ 1.607118] memory used for stack traces: 4224 kB <6>[ 1.611963] per task-struct memory footprint: 1920 bytes <6>[ 1.617461] ACPI: Core revision 20251212 <6>[ 1.622331] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 1.628186] APIC: Switch to symmetric I/O mode setup <6>[ 1.633209] DMAR: Host address width 38 <6>[ 1.637088] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 1.642484] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 1.651373] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 1.656752] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 1.665635] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 1.671011] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 1.679904] DMAR: SATC flags: 0x1 <6>[ 1.683268] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 1.689681] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 1.695135] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 1.705877] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 1.716472] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 1.727093] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 1.728087] CPU0: Thermal monitoring enabled (TM1) <6>[ 1.728087] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 1.728087] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 1.728087] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 1.728087] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 1.728087] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 1.728087] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 1.728087] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 1.728087] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 1.728087] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 1.728087] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 1.728087] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 1.728087] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 1.728087] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 1.728087] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 1.728087] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 1.728087] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 1.728087] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 1.728087] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 1.728087] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 1.728087] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 1.728087] Freeing SMP alternatives memory: 56K <6>[ 1.728087] pid_max: default: 32768 minimum: 301 <6>[ 1.728087] landlock: Up and running. <6>[ 1.728087] Yama: becoming mindful. <6>[ 1.728087] AppArmor: AppArmor initialized <6>[ 1.728087] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 1.728087] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 1.728087] VFS: Finished mounting rootfs on nullfs <6>[ 1.728087] Running RCU synchronous self tests <6>[ 1.728087] Running RCU synchronous self tests <6>[ 1.728087] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 1.728648] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 1.729261] core: cpu_core PMU driver: <6>[ 1.730092] ... version: 6 <6>[ 1.731096] ... bit width: 48 <6>[ 1.732091] ... generic counters: 10 <6>[ 1.733091] ... generic bitmap: 00000000000003ff <6>[ 1.734092] ... fixed-purpose counters: 4 <6>[ 1.735091] ... fixed-purpose bitmap: 000000000000000f <6>[ 1.736092] ... value mask: 0000ffffffffffff <6>[ 1.737092] ... max period: 00007fffffffffff <6>[ 1.738092] ... global_ctrl mask: 0001000f000003ff <6>[ 1.739172] signal: max sigframe size: 3632 <6>[ 1.740112] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 1.741199] rcu: Hierarchical SRCU implementation. <6>[ 1.742094] rcu: Max phase no-delay instances is 400. <6>[ 1.743259] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 1.746075] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 1.746390] smp: Bringing up secondary CPUs ... <6>[ 1.747494] smpboot: x86: Booting SMP configuration: <6>[ 1.748099] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.196555] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.196555] core: cpu_atom PMU driver: <6>[ 0.196555] ... version: 6 <6>[ 0.196555] ... bit width: 48 <6>[ 0.196555] ... generic counters: 8 <6>[ 0.196555] ... generic bitmap: 00000000000000ff <6>[ 0.196555] ... fixed-purpose counters: 6 <6>[ 0.196555] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.196555] ... value mask: 0000ffffffffffff <6>[ 0.196555] ... max period: 00007fffffffffff <6>[ 0.196555] ... global_ctrl mask: 00000077000000ff <6>[ 1.817235] smp: Brought up 1 node, 8 CPUs <6>[ 1.818137] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 1.822153] Memory: 32296960K/33158528K available (25943K kernel code, 5830K rwdata, 9724K rodata, 5780K init, 67896K bss, 837304K reserved, 0K cma-reserved) <6>[ 1.837425] devtmpfs: initialized <6>[ 1.841705] x86/mm: Memory block size: 128MB <6>[ 1.883373] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 1.893186] Running RCU synchronous self tests <6>[ 1.897205] Running RCU synchronous self tests <6>[ 1.903254] Running RCU Tasks wait API self tests <6>[ 1.907121] Running RCU Tasks Rude wait API self tests <6>[ 1.913103] Running RCU Tasks Trace wait API self tests <6>[ 1.918372] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 1.928243] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 1.936221] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 1.946425] PM: RTC time: 17:10:57, date: 2026-04-06 <6>[ 1.947107] Callback from call_rcu_tasks_trace() invoked. <6>[ 1.949099] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 1.957233] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 1.964466] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 1.972517] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 1.981215] audit: initializing netlink subsys (disabled) <5>[ 1.986397] audit: type=2000 audit(1775495456.260:1): state=initialized audit_enabled=0 res=1 <6>[ 1.987481] thermal_sys: Registered thermal governor 'fair_share' <6>[ 1.995106] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 2.001098] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.007096] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.013096] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 2.019180] cpuidle: using governor ladder <6>[ 2.030104] cpuidle: using governor menu <6>[ 2.037950] efi: Freeing EFI boot services memory: 59316K <6>[ 2.043112] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.049860] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 2.059154] PCI: Using configuration type 1 for base access <6>[ 2.065253] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.076426] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 2.083107] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 2.090101] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.097101] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.113049] raid6: skipped pq benchmark and selected avx2x4 <6>[ 2.119102] raid6: using avx2x2 recovery algorithm <6>[ 2.123980] fbcon: Taking over console <6>[ 2.128092] Callback from call_rcu_tasks() invoked. <6>[ 2.128280] ACPI: Added _OSI(Module Device) <6>[ 2.137123] ACPI: Added _OSI(Processor Device) <6>[ 2.142100] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 2.718817] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 2.748409] ACPI: EC: EC started <6>[ 2.752137] ACPI: EC: interrupt blocked <6>[ 2.760802] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.765146] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.057995] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 3.064387] ACPI: \_SB_: platform _OSC: OS control mask [006e7eff] <6>[ 3.067146] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 3.068139] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 3.099040] ACPI: Interpreter enabled <6>[ 3.099229] ACPI: PM: (supports S0 S4 S5) <6>[ 3.100514] ACPI: Using IOAPIC for interrupt routing <6>[ 3.106547] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 3.107126] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.128468] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 3.129129] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 3.174731] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 3.175426] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 3.179478] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 3.531924] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 3.564052] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 3.704673] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 3.706874] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 3.716365] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 3.745021] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 3.745410] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 3.746379] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 4.078025] ACPI: \_TZ_.FN00: New power resource <6>[ 4.084120] ACPI: \_TZ_.FN01: New power resource <6>[ 4.089024] ACPI: \_TZ_.FN02: New power resource <6>[ 4.095040] ACPI: \_TZ_.FN03: New power resource <6>[ 4.100046] ACPI: \_TZ_.FN04: New power resource <6>[ 4.107501] ACPI: \PIN_: New power resource <6>[ 4.117841] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 4.124121] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 4.138920] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 4.164373] PCI host bridge to bus 0000:00 <6>[ 4.168633] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 4.175163] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 4.182431] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 4.190105] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 4.197102] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 4.205105] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 4.216085] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 4.225617] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 4.235241] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 4.242201] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 4.249102] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 4.255146] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 4.266356] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 4.274125] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 4.283300] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 4.292325] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 4.299150] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 4.307695] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 4.315135] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 4.320107] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 4.327115] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 4.335219] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 4.341194] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 4.354459] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 4.362190] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 4.368114] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 4.374121] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 4.383229] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 4.389192] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 4.402061] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 4.409189] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 4.414157] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 4.421435] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 4.430274] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 4.436485] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 4.449201] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 4.459748] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 4.466157] pci 0000:00:0a.0: enabling Extended Tags <6>[ 4.471549] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 4.481126] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 4.487100] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 4.494873] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.503144] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 4.510169] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 4.518869] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.527150] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 4.534100] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 4.540156] pci 0000:00:0d.2: supports D1 D2 <6>[ 4.545094] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.553414] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.562462] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 4.569153] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 4.576261] pci 0000:00:0d.3: supports D1 D2 <6>[ 4.580100] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.589390] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 4.597151] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 4.604166] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 4.614479] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 4.622227] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 4.629560] pci 0000:00:13.0: PME# supported from D3hot <6>[ 4.635881] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.644145] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 4.651165] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 4.659372] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 4.668155] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 4.675101] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 4.681549] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.690219] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.725741] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.733201] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.752558] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.761207] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.780854] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.789207] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.808351] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 4.817176] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 4.824195] pci 0000:00:16.0: PME# supported from D3hot <6>[ 4.833424] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 4.840177] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 4.846564] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 4.852121] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 4.859230] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 4.865186] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 4.878916] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 4.886806] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 4.892197] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 4.899581] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 4.905315] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 4.919425] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 4.931188] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 4.939274] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 4.946149] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 4.953271] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 4.960101] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 4.968165] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 4.975105] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 4.982146] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.990206] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 4.996759] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 5.002369] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 5.008361] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 5.013405] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 5.021162] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 5.026101] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 5.032101] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 5.039315] pci 0000:7f:00.0: supports D1 D2 <6>[ 5.043095] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 5.051140] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 5.062238] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 5.067672] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 5.075520] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 5.084302] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 5.093339] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 5.543253] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 5.550164] Low-power S0 idle used by default for system suspend <6>[ 5.649944] ACPI: EC: interrupt unblocked <6>[ 5.653144] ACPI: EC: event unblocked <6>[ 5.658099] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 5.663103] ACPI: EC: GPE=0x6e <6>[ 5.666109] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 5.673112] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 5.681760] iommu: Default domain type: Translated <6>[ 5.686100] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 5.695372] SCSI subsystem initialized <7>[ 5.699194] libata version 3.00 loaded. <6>[ 5.699431] ACPI: bus type USB registered <6>[ 5.704305] usbcore: registered new interface driver usbfs <6>[ 5.709186] usbcore: registered new interface driver hub <6>[ 5.715189] usbcore: registered new device driver usb <6>[ 5.720345] pps_core: LinuxPPS API ver. 1 registered <6>[ 5.725096] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 5.734132] PTP clock support registered <6>[ 5.739158] EDAC MC: Ver: 3.0.0 <6>[ 5.743531] efivars: Registered efivars operations <6>[ 5.750709] NetLabel: Initializing <6>[ 5.754098] NetLabel: domain hash size = 128 <6>[ 5.758096] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 5.764216] NetLabel: unlabeled traffic allowed by default <6>[ 5.769117] mctp: management component transport protocol core <6>[ 5.775097] NET: Registered PF_MCTP protocol family <6>[ 5.780190] PCI: Using ACPI for IRQ routing <7>[ 5.800502] PCI: pci_cache_line_size set to 64 bytes <6>[ 5.800754] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <6>[ 5.810362] e820: register RAM buffer resource [mem 0x0009f000-0x0009ffff] <6>[ 5.818116] e820: register RAM buffer resource [mem 0x68ff8000-0x6bffffff] <6>[ 5.825105] e820: register RAM buffer resource [mem 0x6992d000-0x6bffffff] <6>[ 5.831135] e820: register RAM buffer resource [mem 0x6cac1000-0x6fffffff] <6>[ 5.838101] e820: register RAM buffer resource [mem 0x87f800000-0x87fffffff] <6>[ 5.846632] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 5.847087] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 5.847087] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 5.867106] vgaarb: loaded <7>[ 5.872122] Monitor-Mwait will be used to enter C-1 state <7>[ 5.872224] Monitor-Mwait will be used to enter C-2 state <7>[ 5.872224] Monitor-Mwait will be used to enter C-3 state <6>[ 5.884510] clocksource: Switched to clocksource tsc-early <5>[ 5.891050] VFS: Disk quotas dquot_6.6.0 <6>[ 5.895130] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 5.904224] AppArmor: AppArmor Filesystem Enabled <6>[ 5.909170] acpi PNP0C02:00: Skipped [io 0x002e-0x002f] <6>[ 5.914549] acpi PNP0C02:00: Skipped [io 0x004e-0x004f] <6>[ 5.919920] acpi PNP0C02:00: Skipped [io 0x0061] <6>[ 5.924678] acpi PNP0C02:00: Skipped [io 0x0063] <6>[ 5.929432] acpi PNP0C02:00: Skipped [io 0x0065] <6>[ 5.934193] acpi PNP0C02:00: Skipped [io 0x0067] <6>[ 5.938953] acpi PNP0C02:00: Skipped [io 0x0070] <6>[ 5.943710] acpi PNP0C02:00: Skipped [io 0x0080] <6>[ 5.948466] acpi PNP0C02:00: Skipped [io 0x0092] <6>[ 5.953224] acpi PNP0C02:00: Skipped [io 0x00b2-0x00b3] <6>[ 5.958600] acpi PNP0C02:00: Reserved [io 0x0680-0x069f] <6>[ 5.964055] acpi PNP0C02:00: Reserved [io 0x164e-0x164f] <6>[ 5.969568] acpi PNP0C02:01: Reserved [io 0x06a4] <6>[ 5.974414] acpi PNP0C02:01: Reserved [io 0x06a0] <6>[ 5.980793] acpi PNP0C02:04: Reserved [mem 0xfedc0000-0xfedc7fff] <6>[ 5.986960] acpi PNP0C02:04: Reserved [mem 0xd8000000-0xd8000fff] <6>[ 5.993130] acpi PNP0C02:04: Could not reserve [mem 0x00000000-0x00000fff] <6>[ 6.000084] acpi PNP0C02:04: Reserved [mem 0xc0000000-0xcfffffff] <6>[ 6.006252] acpi PNP0C02:04: Reserved [mem 0xfed20000-0xfed7ffff] <6>[ 6.012423] acpi PNP0C02:04: Could not reserve [mem 0xfc800000-0xfc81ffff] <6>[ 6.019373] acpi PNP0C02:04: Could not reserve [mem 0xfed45000-0xfed8ffff] <6>[ 6.026323] acpi PNP0C02:04: Reserved [mem 0xfee00000-0xfeefffff] <6>[ 6.033978] acpi PNP0C02:05: Reserved [mem 0xfe000000-0xfe01ffff] <6>[ 6.040186] acpi PNP0C02:05: Reserved [mem 0xfe04c000-0xfe04ffff] <6>[ 6.046355] acpi PNP0C02:05: Reserved [mem 0xfe050000-0xfe0affff] <6>[ 6.052530] acpi PNP0C02:05: Reserved [mem 0xfe0d0000-0xfe0fffff] <6>[ 6.058700] acpi PNP0C02:05: Reserved [mem 0xfe200000-0xfe7fffff] <6>[ 6.064863] acpi PNP0C02:05: Reserved [mem 0xff000000-0xffffffff] <6>[ 6.071033] acpi PNP0C02:05: Reserved [mem 0xdf000000-0xdfffffff] <6>[ 6.077198] acpi PNP0C02:05: Could not reserve [io 0x1800-0x18fe] <6>[ 6.083452] acpi PNP0C02:05: Could not reserve [mem 0xe0000000-0xe074ffff] <6>[ 6.090402] acpi PNP0C02:05: Could not reserve [mem 0xe0730000-0xe074ffff] <6>[ 6.097355] acpi PNP0C02:05: Could not reserve [mem 0xe0710000-0xefffffff] <6>[ 6.105525] acpi PNP0C02:06: Reserved [io 0x2000-0x20fe] <6>[ 6.113486] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009cfff] <6>[ 6.120985] pnp: PnP ACPI init <6>[ 6.170228] pnp: PnP ACPI: found 1 devices <6>[ 6.191014] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 6.200395] NET: Registered PF_INET protocol family <6>[ 6.205623] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 6.216314] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 6.225541] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 6.233637] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 6.242843] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 6.253256] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 6.260478] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 6.268985] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 6.277942] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 6.283754] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 6.292285] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 6.300811] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 6.309383] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 6.316253] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 6.323126] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 6.329985] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 6.337737] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 6.345488] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 6.353233] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 6.360977] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 6.367872] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 6.373165] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 6.379337] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 6.386206] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 6.394388] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 6.399681] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 6.405849] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 6.412717] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 6.420894] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 6.426184] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 6.432366] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 6.439235] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 6.447439] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 6.452470] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 6.458644] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 6.465508] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 6.470560] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 6.477458] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 6.483700] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 6.489940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 6.496881] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 6.503825] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 6.511116] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 6.516744] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 6.523073] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 6.530718] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 6.536351] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 6.542679] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 6.550323] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 6.555952] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 6.562282] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 6.569926] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 6.575559] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 6.581886] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 6.589595] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 6.597503] PCI: CLS 0 bytes, default 64 <6>[ 6.601610] DMAR: No RMRR found <6>[ 6.604808] DMAR: No ATSR found <6>[ 6.607999] DMAR: dmar1: Using Queued invalidation <6>[ 6.612848] DMAR: dmar0: Using Queued invalidation <6>[ 6.617705] DMAR: dmar2: Using Queued invalidation <6>[ 6.623788] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 6.629004] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 6.634236] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 6.639436] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 6.649400] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 6.657826] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 6.663036] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 6.668248] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 6.673450] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 6.678680] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 6.683880] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 6.689038] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 6.694242] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 6.699529] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 6.704824] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 6.710079] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 6.715395] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 6.720645] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 6.725902] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 6.731156] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 6.736451] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 6.741730] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 6.747067] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 6.752392] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 6.757646] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 6.762901] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 6.768160] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 6.773438] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 6.778748] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 6.797170] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 6.803719] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 6.810226] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 6.824424] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 6.834774] clocksource: Switched to clocksource tsc <6>[ 6.839972] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 6.855956] Initialise system trusted keyrings <5>[ 6.860539] Key type blacklist registered <6>[ 6.865510] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 6.883603] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 6.889649] ntfs3: Enabled Linux POSIX ACLs support <6>[ 6.894584] ntfs3: Read-only LZX/Xpress compression included <5>[ 6.900886] integrity: Platform Keyring initialized <5>[ 6.905843] integrity: Machine keyring initialized <6>[ 6.917136] xor: automatically using best checksumming function avx <5>[ 6.924256] Key type asymmetric registered <5>[ 6.928410] Asymmetric key parser 'x509' registered <6>[ 6.933485] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 6.941979] io scheduler mq-deadline registered <6>[ 6.948870] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 6.956773] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 6.963621] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 6.970744] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 6.977523] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 6.984706] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 6.991514] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 6.998606] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 7.005330] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 7.012873] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 7.019742] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 7.027889] input: Lid Switch as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 7.037330] ACPI: button: Lid Switch [LID0] <6>[ 7.041989] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input1 <6>[ 7.049313] ACPI: button: Sleep Button [SLPB] <6>[ 7.054157] input: Power Button as /devices/platform/PNP0C0C:00/input/input2 <6>[ 7.061393] ACPI: button: Power Button [PWRB] <6>[ 7.166943] acpi LNXTHERM:00: registered as thermal_zone0 <6>[ 7.172423] ACPI: thermal: Thermal Zone [TZ00] (37 C) <6>[ 7.179102] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 7.179668] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 7.180529] ACPI: battery: Slot [BAT0] (battery present) <6>[ 7.219236] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 7.245457] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 7.254987] hpet_acpi_add: no address or irqs in _CRS <6>[ 7.260319] Linux agpgart interface v0.103 <6>[ 7.265500] ACPI: bus type drm_connector registered <7>[ 7.271476] initcall simpledrm_platform_driver_init blacklisted <6>[ 7.295464] loop: module loaded <6>[ 7.369388] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 7.498589] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 7.626276] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 7.794464] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 7.985497] Key type psk registered <6>[ 7.991396] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 7.992722] tun: Universal TUN/TAP device driver, 1.6 <6>[ 7.998613] nvme nvme0: pci function 0000:80:00.0 <6>[ 8.004659] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.013225] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 8.023027] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 8.034787] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.040105] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 8.047619] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 8.055392] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 8.057978] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 8.063751] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.076333] usb usb1: Product: xHCI Host Controller <6>[ 8.081267] usb usb1: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-pw-162055v5-debug+ xhci-hcd <6>[ 8.083101] nvme0n1: p1 p2 <6>[ 8.089603] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 8.090927] hub 1-0:1.0: USB hub found <6>[ 8.101229] hub 1-0:1.0: 1 port detected <6>[ 8.109688] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 8.118049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.125353] usb usb2: Product: xHCI Host Controller <6>[ 8.130382] usb usb2: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-pw-162055v5-debug+ xhci-hcd <6>[ 8.138798] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 8.144769] hub 2-0:1.0: USB hub found <6>[ 8.148621] hub 2-0:1.0: 3 ports detected <6>[ 8.177842] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 8.184109] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 8.193431] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 8.205550] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 8.210860] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 8.218391] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 8.226507] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 8.234858] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.242169] usb usb3: Product: xHCI Host Controller <6>[ 8.247107] usb usb3: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-pw-162055v5-debug+ xhci-hcd <6>[ 8.255452] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 8.261033] hub 3-0:1.0: USB hub found <6>[ 8.264904] hub 3-0:1.0: 8 ports detected <6>[ 8.300724] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 8.309082] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.316436] usb usb4: Product: xHCI Host Controller <6>[ 8.321673] usb usb4: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-pw-162055v5-debug+ xhci-hcd <6>[ 8.330023] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 8.335521] hub 4-0:1.0: USB hub found <6>[ 8.339364] hub 4-0:1.0: 2 ports detected <6>[ 8.351081] usbcore: registered new interface driver usb-storage <6>[ 8.357441] usbcore: registered new interface driver usbserial_generic <6>[ 8.364855] usbserial: USB Serial support registered for generic <6>[ 8.371009] usbcore: registered new interface driver ftdi_sio <6>[ 8.376869] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 8.384325] usbcore: registered new interface driver pl2303 <6>[ 8.389993] usbserial: USB Serial support registered for pl2303 <6>[ 8.396101] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 8.402963] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 9.125628] i8042: Can't read CTR while initializing i8042 <3>[ 9.131184] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 9.138200] mousedev: PS/2 mouse device common for all mice <6>[ 9.144924] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 9.151808] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 9.156796] rtc_cmos rtc_cmos: setting system clock to 2026-04-06T17:11:05 UTC (1775495465) <6>[ 9.165430] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 9.172514] i2c_dev: i2c /dev entries driver <6>[ 9.181483] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 9.190014] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 9.197572] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 9.209897] device-mapper: uevent: version 1.0.3 <6>[ 9.214925] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 9.223904] intel_pstate: Intel P-state driver initializing <6>[ 9.233638] Hybrid CPU capacity scaling enabled <6>[ 9.238630] processor cpu0: EM: created perf domain <6>[ 9.243996] processor cpu1: EM: created perf domain <6>[ 9.249162] processor cpu2: EM: created perf domain <6>[ 9.254292] processor cpu3: EM: created perf domain <6>[ 9.259406] processor cpu4: EM: created perf domain <6>[ 9.264513] processor cpu5: EM: created perf domain <6>[ 9.269640] processor cpu6: EM: created perf domain <6>[ 9.274750] processor cpu7: EM: created perf domain <6>[ 9.281073] intel_pstate: HWP enabled <6>[ 9.284786] sdhci: Secure Digital Host Controller Interface driver <6>[ 9.291024] sdhci: Copyright(c) Pierre Ossman <6>[ 9.295616] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 9.303756] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 9.316341] drop_monitor: Initializing network drop monitor service <6>[ 9.322883] NET: Registered PF_INET6 protocol family <6>[ 9.329175] Segment Routing with IPv6 <6>[ 9.332928] In-situ OAM (IOAM) with IPv6 <6>[ 9.336941] NET: Registered PF_PACKET protocol family <5>[ 9.342352] Key type dns_resolver registered <4>[ 9.352528] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 9.359040] microcode: Current revision: 0x00000124 <6>[ 9.364950] IPI shorthand broadcast: enabled <6>[ 9.384761] sched_clock: Marking stable (9189001046, 195555845)->(9907300738, -522743847) <6>[ 9.394694] registered taskstats version 1 <5>[ 9.400619] Loading compiled-in X.509 certificates <6>[ 9.453402] Demotion targets for Node 0: null <6>[ 9.458112] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 9.458120] kmemleak: Automatic memory scanning thread started <5>[ 9.466660] Key type .fscrypt registered <5>[ 9.476222] Key type fscrypt-provisioning registered <6>[ 9.484422] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 9.492364] Key type encrypted registered <6>[ 9.496436] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 9.502160] ima: No TPM chip found, activating TPM-bypass! <5>[ 9.507722] Loading compiled-in module X.509 certificates <5>[ 9.513956] Loaded X.509 cert 'Build time autogenerated kernel key: 279c1743dedddfb8de4f250c5977cdbc46ff91c6' <6>[ 9.523977] ima: Allocated hash algorithm: sha256 <6>[ 9.528776] ima: No architecture policies found <6>[ 9.533461] evm: Initialising EVM extended attributes: <6>[ 9.538659] evm: security.selinux <6>[ 9.542022] evm: security.SMACK64 <6>[ 9.545383] evm: security.SMACK64EXEC <6>[ 9.549082] evm: security.SMACK64TRANSMUTE <6>[ 9.553222] evm: security.SMACK64MMAP <6>[ 9.556934] evm: security.apparmor <6>[ 9.560372] evm: security.ima <6>[ 9.563377] evm: security.capability <6>[ 9.566994] evm: HMAC attrs: 0x1 <6>[ 9.573260] PM: Magic number: 6:856:187 <6>[ 9.577418] acpi device:46: hash matches <6>[ 9.581598] netconsole: network logging started <6>[ 9.586771] RAS: Correctable Errors collector initialized. <6>[ 9.592958] clk: Disabling unused clocks <6>[ 9.596942] PM: genpd: Disabling unused power domains <6>[ 9.602606] md: Waiting for all devices to be available before autodetect <6>[ 9.609458] md: If you don't use raid, use raid=noautodetect <6>[ 9.615180] md: Autodetecting RAID arrays. <6>[ 9.619326] md: autorun ... <6>[ 9.622165] md: ... autorun DONE. <6>[ 9.670919] EXT4-fs (nvme0n1p2): mounted filesystem 9a25468b-c3fd-45e2-b59f-4eab10a53c55 ro with ordered data mode. Quota mode: none. <6>[ 9.683095] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 9.690523] devtmpfs: mounted <6>[ 9.693671] VFS: Pivoted into new rootfs <6>[ 9.715438] Freeing unused decrypted memory: 2036K <6>[ 9.721166] Freeing unused kernel image (initmem) memory: 5780K <6>[ 9.727170] Write protecting the kernel read-only data: 36864k <6>[ 9.734577] Freeing unused kernel image (text/rodata gap) memory: 680K <6>[ 9.741487] Freeing unused kernel image (rodata/data gap) memory: 516K <6>[ 9.752672] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 9.762818] Run /sbin/init as init process <7>[ 9.766983] with arguments: <7>[ 9.766984] /sbin/init <7>[ 9.766985] with environment: <7>[ 9.766986] HOME=/ <7>[ 9.766986] TERM=linux <7>[ 9.813019] systemd[1]: Inserted module 'autofs4' <7>[ 9.840360] systemd[1]: systemd 255.4-1ubuntu8.14 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 9.873408] systemd[1]: Detected architecture x86-64. <7>[ 9.884929] systemd[1]: Hostname set to . <7>[ 10.125819] systemd[1]: Queued start job for default target graphical.target. <7>[ 10.162102] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 10.182614] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. <7>[ 10.203617] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 10.224334] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 10.240953] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 10.262440] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 10.285694] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA9\x2dCAA8.device - /dev/disk/by-uuid/BBA9-CAA8... <7>[ 10.306664] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0... <7>[ 10.321690] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 10.340697] systemd[1]: Reached target slices.target - Slice Units. <7>[ 10.354675] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 10.371697] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 10.387707] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 10.407080] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 10.426265] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 10.445125] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 10.462160] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 10.478112] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 10.498000] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 10.524892] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 10.545481] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 10.562274] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 10.581980] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.596952] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 10.615956] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 10.656062] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 10.679996] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 10.690713] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 10.707409] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 10.741056] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 10.751271] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 10.767447] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 10.785153] systemd-journald[204]: Collecting audit messages is disabled. <7>[ 10.792805] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 10.814273] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 10.834282] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 10.852657] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 10.868642] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 10.887355] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 10.916692] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <6>[ 10.925334] pstore: Using crash dump compression: deflate <6>[ 10.932488] pstore: Registered efi_pstore as persistent store backend <6>[ 10.941456] fuse: init (API version 7.45) <7>[ 10.952013] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 10.961325] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 10.982642] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 11.001232] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 11.016817] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 11.033315] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 11.052374] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 11.069458] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 11.388060] EXT4-fs (nvme0n1p2): re-mounted 9a25468b-c3fd-45e2-b59f-4eab10a53c55 r/w. <6>[ 11.432569] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:274595840k SS <7>[ 11.472405] systemd-journald[204]: Received client request to flush runtime journal. <7>[ 11.487295] systemd-journald[204]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 11.487311] systemd-journald[204]: Rotating system journal. <4>[ 11.951448] nvme nvme0: using unchecked data buffer <6>[ 12.131306] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 12.140748] ACPI: bus type thunderbolt registered <6>[ 12.153015] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 12.161671] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 12.169406] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v1.bin, version: Nov 13 2025*NPU40xx*ci_tag_ud202548_vpu_rc_20251112_1901-1-g72f907ffc78*72f907ffc780df5579a2fed65afc4944da8b0e44 <6>[ 12.169412] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: HW <6>[ 12.236581] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <4>[ 12.290530] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:01, deferring <6>[ 12.303808] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 12.312281] intel-hid INTC107B:00: platform supports 5 button array <6>[ 12.324980] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <6>[ 12.326083] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 12.328331] intel_rapl_common: Found RAPL domain package <6>[ 12.328341] intel_rapl_common: Found RAPL domain dram <5>[ 12.392015] audit: type=1400 audit(1775495468.733:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=401 comm="apparmor_parser" <5>[ 12.392492] audit: type=1400 audit(1775495468.733:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=405 comm="apparmor_parser" <5>[ 12.392864] audit: type=1400 audit(1775495468.734:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=407 comm="apparmor_parser" <5>[ 12.393618] audit: type=1400 audit(1775495468.734:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=403 comm="apparmor_parser" <5>[ 12.394457] audit: type=1400 audit(1775495468.735:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=406 comm="apparmor_parser" <5>[ 12.399359] audit: type=1400 audit(1775495468.740:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=408 comm="apparmor_parser" <5>[ 12.400599] audit: type=1400 audit(1775495468.742:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=409 comm="apparmor_parser" <5>[ 12.404071] audit: type=1400 audit(1775495468.745:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=410 comm="apparmor_parser" <5>[ 12.407427] audit: type=1400 audit(1775495468.748:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=411 comm="apparmor_parser" <5>[ 12.410528] audit: type=1400 audit(1775495468.751:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=413 comm="apparmor_parser" <3>[ 12.418335] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 12.425359] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 12.427928] pci 0000:00:05.0: Setting to D3hot <6>[ 12.447147] intel_pmc_core INT33A1:00: initialized <6>[ 12.559023] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 12.603408] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 12.629686] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 12.629692] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 12.629694] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 12.866213] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 12.888702] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 12.913783] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 12.930799] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 13.016429] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 13.075670] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 13.075679] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 13.075680] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 13.075682] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 13.075683] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 13.224199] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 13.225660] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.328917] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a4:ee:2f, XID 541, IRQ 195 <6>[ 13.328924] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 13.333484] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.567841] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.598793] intel_rapl_common: Found RAPL domain package <6>[ 13.598800] intel_rapl_common: Found RAPL domain core <6>[ 13.598803] intel_rapl_common: Found RAPL domain dram <6>[ 13.598806] intel_rapl_common: Found RAPL domain psys <6>[ 13.708161] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.718176] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.721664] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.860847] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 13.862082] hid: raw HID events driver (C) Jiri Kosina <4>[ 13.866730] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 13.872968] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 13.874747] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 13.885031] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 13.885056] 0x000000000000-0x000002000000 : "BIOS" <6>[ 13.898942] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.918859] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.919325] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.921335] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.924076] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.925383] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.925607] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 13.926869] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.928522] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.929044] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.930205] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.931363] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.936613] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.940016] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.942153] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.945395] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.947629] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.950667] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.952449] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.954859] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.956398] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.959765] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.959821] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.963982] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.067543] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.071265] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.077941] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.083910] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.084814] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 14.089213] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.092385] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.101299] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.105940] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.112153] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 14.114328] block nvme0n1: No UUID available providing old NGUID <6>[ 14.117102] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.122175] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.127455] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.135390] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.141428] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.150275] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.160677] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.165254] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.170018] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.174635] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.182166] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.583278] loop0: detected capacity change from 0 to 8 <6>[ 14.994297] Consider using thermal netlink events interface <6>[ 15.624980] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 15.625028] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 15.625072] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 16.660486] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 16.660854] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 16.660925] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 17.653035] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 24.230516] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 24.235315] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 32.163716] systemd-journald[204]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 51.898108] [IGT] xe_module_load: executing <4>[ 51.898155] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 51.904943] [IGT] xe_module_load: starting subtest load <5>[ 52.220605] Setting dangerous option force_probe - tainting kernel <6>[ 52.224137] xe 0000:00:02.0: vgaarb: deactivate vga console <7>[ 52.225505] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6>[ 52.225944] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 52.225953] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 52.226069] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 52.226177] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 52.228361] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 52.228535] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 52.228675] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 52.228806] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 52.228929] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 52.229028] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 52.229132] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 52.229226] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 52.229310] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 52.229404] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 52.229500] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 52.229622] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 52.229762] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 52.229877] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 52.229998] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 52.230128] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 52.230250] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 52.230361] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 52.230466] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 52.230568] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 52.230669] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.230792] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.230901] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 52.231008] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.231115] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.231221] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.231325] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 52.231430] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.231531] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.231625] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.231722] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 52.231843] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.231948] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.232051] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.232151] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 52.232243] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.232335] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.232427] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.232519] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 52.232610] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.232702] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.232806] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.232917] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 52.233288] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 52.233422] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 52.233549] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 52.233670] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 52.233783] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 52.233917] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 52.234029] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7>[ 52.234135] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 52.234238] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 52.234344] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 52.234442] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 52.234535] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 52.234626] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 52.234718] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 52.234814] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 52.234920] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 52.235018] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 52.235116] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 52.235216] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.235322] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.235425] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.235524] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 52.235616] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 52.235712] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.235808] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.235903] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.236016] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 52.236142] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.236303] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 52.236452] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.236604] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 52.236789] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 52.236922] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 52.237065] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 52.237185] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.237336] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 52.237447] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 52.237571] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.237672] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 52.237782] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.237880] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 52.237989] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.238102] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 52.238386] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.238485] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 52.238892] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 52.239413] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 52.239566] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 52.239662] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 52.239750] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 52.239836] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 52.239919] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 52.240001] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 52.240082] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 52.240178] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 52.240264] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 52.240348] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 52.240433] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 52.240515] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 52.240592] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 52.243236] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 52.243677] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 52.243846] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 52.244073] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 52.244294] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 52.244538] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 52.244749] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 52.244951] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 52.245150] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.245349] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 52.245568] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.245763] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 52.245953] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.246142] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 52.246337] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 52.246896] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 52.247426] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.247970] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 52.247990] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7>[ 52.248146] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.248319] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 52.248494] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.248685] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 52.248862] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 52.249033] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 52.249201] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.249369] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 52.249537] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.249729] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 52.249908] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.250089] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 52.253617] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.253812] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 52.254006] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 52.254244] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:392:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 52.254494] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:392:DDI A/PHY A] <7>[ 52.254754] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 52.254960] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 52.255139] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 52.255324] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 52.255512] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 52.255688] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 52.255877] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 52.256053] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 52.256232] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 52.256482] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:392:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 52.256769] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.256938] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.257094] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.257245] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.257392] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.257689] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.258015] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 52.259095] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 52.259428] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <6>[ 52.261570] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 52.284191] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 52.296741] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 52.321878] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 52.359596] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 52.372170] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 52.435061] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 52.799168] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 52.799181] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.799183] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.799185] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 52.799189] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 52.799192] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.799194] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 52.799200] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.799201] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 52.799205] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.799246] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.799248] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.799249] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.799263] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.799384] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.811637] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:393:eDP-1] Performing OUI wait (0 ms) <7>[ 52.824137] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 52.824277] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] AUX Backlight Control Supported! <7>[ 52.824388] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Using VESA eDP backlight controls <7>[ 52.824499] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:393:eDP-1] DRRS type: seamless <7>[ 52.836635] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=2 <7>[ 52.836654] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight enable is controlled through PWM <7>[ 52.836789] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight level is controlled through PWM using PWM values <7>[ 52.836924] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 52.837041] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using AUX VESA interface for backlight control <7>[ 52.837149] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:393:eDP-1] backlight initialized, disabled, brightness 192000/192000 <7>[ 52.837309] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.837421] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.837530] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.837630] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.837742] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.837870] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.838082] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:401:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 52.838267] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.838401] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:401:DDI TC1/PHY TC1] <7>[ 52.838795] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:413:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 52.838937] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.839065] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:413:DDI TC2/PHY TC2] <7>[ 52.839327] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:421:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 52.839465] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.839600] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:421:DDI TC3/PHY TC3] <7>[ 52.840030] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6>[ 52.840159] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 52.840579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: enabled <7>[ 52.840713] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] hw state readout: disabled <7>[ 52.840861] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] hw state readout: disabled <7>[ 52.840970] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: enabled, pipe A <7>[ 52.841076] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A <7>[ 52.841182] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A <7>[ 52.841288] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A <7>[ 52.841392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A <7>[ 52.841492] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A <7>[ 52.841588] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] hw state readout: disabled, pipe B <7>[ 52.841691] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] hw state readout: disabled, pipe B <7>[ 52.841794] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] hw state readout: disabled, pipe B <7>[ 52.841910] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] hw state readout: disabled, pipe B <7>[ 52.842017] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] hw state readout: disabled, pipe B <7>[ 52.842121] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] hw state readout: disabled, pipe B <7>[ 52.842225] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] hw state readout: disabled, pipe C <7>[ 52.842326] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] hw state readout: disabled, pipe C <7>[ 52.842424] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] hw state readout: disabled, pipe C <7>[ 52.842522] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] hw state readout: disabled, pipe C <7>[ 52.842617] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] hw state readout: disabled, pipe C <7>[ 52.842714] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] hw state readout: disabled, pipe C <7>[ 52.843800] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 52.843936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:392:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 52.844036] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.844132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 52.844222] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.844304] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.844384] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:405:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.844469] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.844557] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 52.844645] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.844731] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.844814] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:417:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.844902] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.845006] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 52.845101] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.845191] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:424:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.845280] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:425:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.846299] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 52.846409] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 52.846510] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.846609] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 52.846712] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.846816] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.846921] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.847024] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.847181] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:393:eDP-1] hw state readout: enabled <7>[ 52.847290] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:402:DP-1] hw state readout: disabled <7>[ 52.847388] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:414:DP-2] hw state readout: disabled <7>[ 52.847489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:422:DP-3] hw state readout: disabled <7>[ 52.847668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 173855 kHz <7>[ 52.847775] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz <7>[ 52.847868] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz <7>[ 52.847956] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz <7>[ 52.848050] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz <7>[ 52.848158] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz <7>[ 52.848251] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 173855 kHz <7>[ 52.848343] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] min_cdclk 0 kHz <7>[ 52.848434] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] min_cdclk 0 kHz <7>[ 52.848528] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] min_cdclk 0 kHz <7>[ 52.848625] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] min_cdclk 0 kHz <7>[ 52.848720] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] min_cdclk 0 kHz <7>[ 52.848812] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] min_cdclk 0 kHz <7>[ 52.848903] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] min_cdclk 0 kHz <7>[ 52.848994] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] min_cdclk 0 kHz <7>[ 52.849081] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] min_cdclk 0 kHz <7>[ 52.849178] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] min_cdclk 0 kHz <7>[ 52.849265] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] min_cdclk 0 kHz <7>[ 52.849352] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] min_cdclk 0 kHz <7>[ 52.849438] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] min_cdclk 0 kHz <7>[ 52.849519] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] min_cdclk 0 kHz <7>[ 52.849746] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 52.849836] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:270:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.849927] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:389:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.850016] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 52.850137] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 52.850270] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 52.850419] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 52.850538] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 52.850804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [setup_hw_state] <7>[ 52.850923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 52.851049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 52.851163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 52.851287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 52.851402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 52.851515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 52.851626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 52.851739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 52.851850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 52.851962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 52.852076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 52.852191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7>[ 52.852320] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 52.852429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 52.852538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 52.852645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 52.852752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 52.852856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 52.852959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.853062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.853162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.853265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.853380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.853481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7>[ 52.853580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 52.853677] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 52.853774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7>[ 52.853870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 52.853970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 52.854067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 52.854164] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 52.854261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7>[ 52.854368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 52.854465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 52.854560] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 52.854657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 52.854759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 52.854864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 52.854967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 52.855068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 52.855168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 52.855268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 52.855376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 52.855473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.855568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.855664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.855759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.855853] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.855948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.856037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.856122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.856213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.856305] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.856408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [setup_hw_state] <7>[ 52.856507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [setup_hw_state] <7>[ 52.856607] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 52.856898] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:151:pipe A][PLANE:35:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <6>[ 52.857007] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7>[ 52.857009] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:35:plane 1A] on [CRTC:151:pipe A] <6>[ 52.870885] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.60.0 <7>[ 52.877456] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 52.877587] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 52.877675] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 52.877758] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 52.877837] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 52.877915] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 52.877990] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 52.878063] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 52.878135] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 52.878206] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 52.878296] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 52.878373] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 52.878448] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 52.878522] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 52.878594] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 52.878719] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 52.889808] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 52.890645] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 52.890874] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,0000007f <7>[ 52.890982] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,0000007f <7>[ 52.891081] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 52.891176] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 52.891259] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 53.530252] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 53.530255] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 53.530256] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 53.530420] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 53.530543] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7>[ 53.530659] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7>[ 53.530777] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.530894] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.530998] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.531130] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 53.531265] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 53.531414] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 53.531515] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.531621] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.531728] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.532962] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 53.533080] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 53.533199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 53.533302] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 53.533400] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 53.533512] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 53.533607] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 53.533701] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 53.533793] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 53.533881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.533972] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.534061] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.534149] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.534237] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.534326] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.534414] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.534513] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.534599] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.534686] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.534774] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.534862] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.534948] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.535031] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.535114] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.535194] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.535275] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 53.535363] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 53.535451] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.535548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.535635] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7>[ 53.535724] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7>[ 53.535814] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7>[ 53.535900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7>[ 53.535986] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7>[ 53.536073] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 53.536163] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 53.536255] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 53.536346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.536435] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.536528] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 53.536638] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.536730] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.537069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 53.537161] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 53.537242] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.537323] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.537636] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 53.537730] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.537823] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.537912] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.538235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 53.538333] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 53.538428] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.538519] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.538610] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.538717] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.538814] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.539434] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 53.539574] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 53.539661] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 53.539769] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 53.539867] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.539964] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 53.540059] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.540153] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.540240] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.540323] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.540414] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.540494] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.540574] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.540649] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.540721] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.540831] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 53.541069] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 53.542598] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x1708000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.545562] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 53.562338] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7>[ 53.573443] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.573762] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.575024] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7>[ 53.575167] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 53.575276] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 53.575379] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 53.575487] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 53.575581] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 53.575661] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 53.575741] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 53.575823] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 (MCR) <7>[ 53.579804] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 53.579892] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 53.579979] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 53.582803] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 53.582903] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 53.588459] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.60.0 <7>[ 53.595357] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 53.595488] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.595585] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 53.595671] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.595752] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 53.595832] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.595913] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.596021] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.596121] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.596217] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.596302] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.596379] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.596455] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.596525] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 53.597883] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 53.599862] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 53.600860] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 53.600982] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.601100] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 53.622892] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.623353] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.623570] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7>[ 53.623743] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7>[ 53.623895] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 53.624042] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 53.624217] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 53.624356] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 53.624358] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 53.624360] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 53.624362] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 53.624363] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 53.624365] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 53.624366] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 53.624368] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 53.624370] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 53.624371] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 53.624559] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 53.624763] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 53.624953] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 53.625137] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 53.625312] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 53.625506] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 53.625691] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 53.625861] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 53.626018] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 53.626182] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 53.626447] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 53.626594] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 53.626746] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 53.626910] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 53.627066] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 53.627196] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 53.627358] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 53.627481] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 53.627600] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 53.627720] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 53.627876] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 53.628957] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 53.629070] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 53.629181] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 53.629302] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 53.629415] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 53.629526] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 53.629631] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 53.629729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7>[ 53.629824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 53.629913] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 53.629999] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 53.630087] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 53.630182] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 53.630275] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.630397] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.630509] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.630621] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.630729] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.630835] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.630931] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.631018] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.631100] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.631184] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.631268] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.631351] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.631466] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.631564] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.631661] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.631743] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.631825] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 53.631918] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 53.632015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 53.632110] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7>[ 53.632198] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7>[ 53.632284] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7>[ 53.632374] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7>[ 53.632487] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7>[ 53.632591] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7>[ 53.632692] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7>[ 53.632779] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7>[ 53.632863] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7>[ 53.633301] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 53.633416] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 53.633534] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 53.633634] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7>[ 53.633733] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7>[ 53.633816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7>[ 53.633896] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7>[ 53.633981] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7>[ 53.634069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7>[ 53.634154] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7>[ 53.634238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7>[ 53.634320] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7>[ 53.634711] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 53.634824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 53.634922] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 53.635489] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 53.635666] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 53.635775] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.635871] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 53.635954] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.636037] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 53.636117] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.636197] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.636274] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.636350] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.636425] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.636500] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.636588] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.636677] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.636766] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 53.636876] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 53.637013] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 53.638371] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x2c63000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.656422] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7>[ 53.677668] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.678132] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.680202] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 53.680533] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.684325] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 53.684705] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.688875] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 53.689141] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.734226] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 53.735189] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.735565] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.735929] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.736224] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.736861] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 53.737113] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 53.737358] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 53.738626] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008 <7>[ 53.738988] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108 <7>[ 53.739303] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208 <7>[ 53.739609] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308 <7>[ 53.739954] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8 <7>[ 53.740290] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 0: start 0x98008 <7>[ 53.740597] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 1: start 0x98108 <7>[ 53.740957] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 2: start 0x98208 <7>[ 53.741255] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 3: start 0x98308 <7>[ 53.741548] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 4: start 0x983c8 <7>[ 53.741922] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 0: start 0x52008 <7>[ 53.742212] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 1: start 0x52108 <7>[ 53.742498] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 2: start 0x52208 <7>[ 53.742846] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 3: start 0x52308 <7>[ 53.743137] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 4: start 0x523c8 <7>[ 53.743797] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 53.744119] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 53.744417] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 53.744798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [fastset] <7>[ 53.745191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [fastset] <7>[ 53.746912] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 53.747190] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 53.748681] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7>[ 53.749021] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C] <7>[ 53.759025] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:393:eDP-1] adding connector to sysfs <7>[ 53.763641] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:393:eDP-1] backlight device intel_backlight registered <7>[ 53.763963] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 53.764212] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Panel prepare <7>[ 53.764889] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 53.767585] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:393:eDP-1] generating connector hotplug event <7>[ 53.767702] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:402:DP-1] adding connector to sysfs <7>[ 53.768407] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 53.769942] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:402:DP-1] generating connector hotplug event <7>[ 53.770023] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:414:DP-2] adding connector to sysfs <7>[ 53.770923] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 53.772147] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:414:DP-2] generating connector hotplug event <7>[ 53.772229] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:422:DP-3] adding connector to sysfs <7>[ 53.773129] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 53.774301] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:422:DP-3] generating connector hotplug event <6>[ 53.774360] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 53.774444] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 53.792839] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 53.798987] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5 <7>[ 53.801264] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 53.801445] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 53.801902] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 53.802051] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 53.803535] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 53.803735] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.803913] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:402:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.804095] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 53.804279] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.804420] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:414:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.804556] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 53.804715] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.804853] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:422:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.804989] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <6>[ 53.805222] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 53.805891] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:35:plane 1A] no fb, skipping <7>[ 53.805931] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 53.806032] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:270:pipe B] not active, skipping <7>[ 53.806259] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:389:pipe C] not active, skipping <7>[ 53.806374] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 53.806663] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 53.806918] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 53.806926] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 53.807583] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.807978] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 53.808155] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.808306] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.808613] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.808625] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.808628] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.808630] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.808634] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.808638] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.808640] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 53.808654] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.808657] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 53.808661] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.808739] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 53.808884] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 53.809016] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 53.809469] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] status updated from unknown to connected <5>[ 53.809726] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.809730] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.809732] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.809809] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 53.809818] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.809823] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.809828] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 53.809834] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 53.810043] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 53.810051] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 53.810055] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 53.810233] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 53.810238] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 53.810242] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 53.810408] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 53.810412] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 53.810416] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 53.810419] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 53.810422] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 53.810594] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 53.810641] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 53.810645] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 53.810661] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 53.810918] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 53.810972] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 53.810943] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6>[ 53.811087] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <7>[ 53.811827] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 53.811835] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 53.813911] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 53.821055] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb <6>[ 53.822641] fbcon: xedrmfb (fb0) is primary device <7>[ 53.824979] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 53.825273] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 53.825542] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7>[ 53.825804] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 53.826016] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A] <7>[ 53.826227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 53.826435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state <7>[ 53.826636] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 53.826851] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.827051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7>[ 53.827247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.827439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.827633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 53.827828] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.828012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.828195] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.828379] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.828562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.828744] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 53.828944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 53.829125] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.829304] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7>[ 53.829482] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 53.829658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 53.829834] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.830026] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 53.830196] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.830366] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.830534] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.830704] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 53.830879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 53.831077] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 53.831260] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 53.831440] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7>[ 53.831620] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7>[ 53.831856] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 53.832082] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 53.832254] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 53.832413] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 53.832564] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 53.832713] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.832861] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.833017] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.833161] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.833303] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.833444] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.833584] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.833742] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.833900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.834051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.834209] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.834370] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.834520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.834655] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.834790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.834952] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.835129] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.835261] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.835388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.835511] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.835660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1 <7>[ 53.835885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 53.836073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 53.836276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.836454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.836645] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 53.836893] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0 <7>[ 53.837084] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 53.837285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7>[ 53.837471] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.837657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 53.838043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.838235] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.838397] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.838557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.838720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 53.838882] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.839042] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.839200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.839407] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 53.839575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7>[ 53.839729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 53.839880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <6>[ 53.840012] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 53.840037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 53.840206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 53.840342] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 53.840378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 53.840533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 53.840687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 53.840841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.840993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 53.841149] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 53.841324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.841484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 53.841634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.841773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.841912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.842058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.842206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.842360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7>[ 53.842498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.842632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.842766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7>[ 53.842916] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.843047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.843191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.843333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.843504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7>[ 53.843652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 53.843793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 53.843938] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.844081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 53.844222] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.844360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.844522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.844658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 53.844794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 53.844923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.845054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.845186] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.845316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.845455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.845583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.845713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.845856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.845998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.846148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.846293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.846438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 53.846595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 53.846738] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 53.846860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7>[ 53.846974] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7>[ 53.847088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7>[ 53.847198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7>[ 53.847290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7>[ 53.848403] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 53.848564] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 53.861272] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.861499] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.861660] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.861811] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.861957] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.862107] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.862245] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.862381] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.862516] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.862650] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.862783] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.862916] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.863054] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.863162] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 53.863188] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.863322] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.863454] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.863587] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.863720] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.863852] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.863984] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.864118] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.864249] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.864380] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.864511] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.864642] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.864774] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.864907] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.865038] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.865181] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.865313] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.865446] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.865579] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.865711] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.865842] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.865973] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.866103] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 53.870518] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 53.871425] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 53.872325] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 53.874035] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 54.060026] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7>[ 54.061430] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 54.066421] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7>[ 54.066773] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 54.067173] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.067534] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 54.068071] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 54.119527] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.119877] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 54.128177] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.128727] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7>[ 54.128777] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.129199] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.129904] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 54.130720] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 54.131398] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 54.131821] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7>[ 54.132130] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7>[ 54.132431] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7>[ 54.132746] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7>[ 54.133015] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7>[ 54.133279] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7>[ 54.133551] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7>[ 54.133858] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7>[ 54.134115] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7>[ 54.134367] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7>[ 54.134694] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7>[ 54.134963] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7>[ 54.135215] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7>[ 54.135518] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.136710] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7>[ 54.137091] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 54.139086] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7>[ 54.139416] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining) <7>[ 54.152564] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.152902] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 54.153238] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 54.153582] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.272285] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 54.648684] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 54.677142] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.677520] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 54.677915] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 54.714423] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.714785] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 54.715139] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 54.715736] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.880999] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.881076] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.881205] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.892425] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.892873] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 54.893239] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 54.895228] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 54.896632] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 54.897418] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 54.898510] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 54.899821] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 54.900910] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 54.901268] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 54.902831] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 54.903297] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 54.904084] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 54.904567] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 54.904911] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 54.905320] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000 <7>[ 54.921589] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 54.923545] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7>[ 54.923987] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7>[ 54.925727] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 54.927491] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 54.928632] Console: switching to colour frame buffer device 180x56 <7>[ 54.928453] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=192000/192000 <7>[ 54.929055] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:393:eDP-1] set backlight level = 192000 <7>[ 54.929514] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000 <6>[ 54.958811] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 54.958837] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 54.959106] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 54.959185] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.959263] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 54.960332] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 54.960364] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 54.960684] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 54.961148] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 54.961543] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 54.961792] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.961981] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 54.962387] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 54.962663] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.962788] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 54.963169] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 54.963257] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.963604] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 54.963810] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.964003] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 54.964418] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 54.964791] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 54.964965] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.964989] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.964995] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.964997] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.965006] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.965013] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.965017] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 54.965045] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.965048] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 54.965056] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.965123] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 54.965129] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 54.965414] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 54.965483] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.965713] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 54.965825] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 54.966046] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 54.966395] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 54.966667] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <5>[ 54.966932] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.966943] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.966948] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.967018] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 54.967324] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 54.967366] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.967380] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.967397] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 54.967412] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 54.967412] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 54.967754] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 54.968145] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.968736] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 54.968753] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 54.968761] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 54.969125] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.969159] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 54.969433] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 54.969444] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 54.969451] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 54.969455] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 54.969831] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 54.970176] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 54.970527] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 54.970850] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 54.971207] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 54.971511] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 54.971850] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.972176] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.972464] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 54.972885] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.973238] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 54.973248] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 54.973257] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 54.973262] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 54.973267] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 54.974033] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.974169] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 54.974176] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 54.974300] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.978035] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.978339] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 54.978435] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 54.989498] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.022619] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.023359] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.023893] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.043836] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.044366] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.055487] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 55.055813] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 55.056315] [IGT] xe_module_load: exiting, ret=0 <7>[ 55.090945] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.091572] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.092088] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.169707] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 56.001916] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.002051] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.067638] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.579249] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off <7>[ 57.579877] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067