<5>[ 0.000000] Linux version 6.14.0-rc5-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Mar 4 10:33:13 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fef5000 SMBIOS=0x6cbc7000 MEMATTR=0x68f39018 ESRT=0x68f71098 MOKvar=0x6cd0c000 TPMEventLog=0x6ff5a018
<6>[ 0.000000] efi: Remove mem256: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem258: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D86.2501240726 01/24/2025
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000373] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000374] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004642] esrt: Reserving ESRT space from 0x0000000068f71098 to 0x0000000068f711e8.
<7>[ 0.004650] e820: update [mem 0x68f71000-0x68f71fff] usable ==> reserved
<6>[ 0.004667] Using GB pages for direct mapping
<6>[ 0.005344] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005345] printk: early log buf free: 258872(98%)
<6>[ 0.005346] Secure boot disabled
<6>[ 0.005348] ACPI: Early table checksum verification disabled
<6>[ 0.005351] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005354] ACPI: XSDT 0x000000006FF71228 0001A4 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005358] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005360] ACPI: DSDT 0x000000006FFB6000 0254DE (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005362] ACPI: FACS 0x000000006FED9000 000040
<6>[ 0.005363] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005365] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005366] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005368] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005369] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005370] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005371] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005373] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005374] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005375] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005377] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005378] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005379] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005381] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005382] ACPI: SSDT 0x000000006FFDD000 009156 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005383] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005385] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005386] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005388] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005390] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005391] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005392] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005393] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005395] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005396] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005397] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005399] ACPI: SSDT 0x000000006FF85000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930)
<6>[ 0.005400] ACPI: TPM2 0x000000006FF84000 00004C (v04 INTEL LNL 00000002 01000013)
<6>[ 0.005401] ACPI: LPIT 0x000000006FF83000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005402] ACPI: SSDT 0x000000006FF82000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005404] ACPI: SSDT 0x000000006FF81000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005405] ACPI: DBGP 0x000000006FF80000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005406] ACPI: DBG2 0x000000006FF7F000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005408] ACPI: NHLT 0x000000006FF7E000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005409] ACPI: SSDT 0x000000006FF7C000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005410] ACPI: SSDT 0x000000006FF75000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005412] ACPI: ECDT 0x000000006FF74000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005413] ACPI: DMAR 0x000000006FF73000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005414] ACPI: FPDT 0x000000006FF72000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005415] ACPI: SSDT 0x000000006FFA8000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005417] ACPI: SSDT 0x000000006FF6F000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005418] ACPI: SSDT 0x000000006FF6C000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005419] ACPI: SDEV 0x000000006FF6B000 000046 (v01 00000000 00000000)
<6>[ 0.005421] ACPI: SSDT 0x000000006FF60000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005422] ACPI: PHAT 0x000000006FF5F000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005423] ACPI: BGRT 0x000000006FF5E000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005424] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113]
<6>[ 0.005425] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb4dd]
<6>[ 0.005426] ACPI: Reserving FACS table memory at [mem 0x6fed9000-0x6fed903f]
<6>[ 0.005426] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005426] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005428] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005428] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005428] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005428] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005429] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6155]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955]
<6>[ 0.005431] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037]
<6>[ 0.005432] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005432] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7]
<6>[ 0.005432] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ff85000-0x6ff8560d]
<6>[ 0.005434] ACPI: Reserving TPM2 table memory at [mem 0x6ff84000-0x6ff8404b]
<6>[ 0.005434] ACPI: Reserving LPIT table memory at [mem 0x6ff83000-0x6ff830cb]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff82d5b]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff811ef]
<6>[ 0.005435] ACPI: Reserving DBGP table memory at [mem 0x6ff80000-0x6ff80033]
<6>[ 0.005435] ACPI: Reserving DBG2 table memory at [mem 0x6ff7f000-0x6ff7f053]
<6>[ 0.005436] ACPI: Reserving NHLT table memory at [mem 0x6ff7e000-0x6ff7e2e2]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ff7c000-0x6ff7d15b]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ff75000-0x6ff7b53a]
<6>[ 0.005437] ACPI: Reserving ECDT table memory at [mem 0x6ff74000-0x6ff74068]
<6>[ 0.005437] ACPI: Reserving DMAR table memory at [mem 0x6ff73000-0x6ff730d7]
<6>[ 0.005437] ACPI: Reserving FPDT table memory at [mem 0x6ff72000-0x6ff72043]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffa8000-0x6ffa886c]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ff6f000-0x6ff703da]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ff6c000-0x6ff6e462]
<6>[ 0.005438] ACPI: Reserving SDEV table memory at [mem 0x6ff6b000-0x6ff6b045]
<6>[ 0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ff60000-0x6ff6a4f9]
<6>[ 0.005439] ACPI: Reserving PHAT table memory at [mem 0x6ff5f000-0x6ff5f7bf]
<6>[ 0.005439] ACPI: Reserving BGRT table memory at [mem 0x6ff5e000-0x6ff5e037]
<6>[ 0.005502] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005705] No NUMA configuration found
<6>[ 0.005705] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005710] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005821] Zone ranges:
<6>[ 0.005821] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005822] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005823] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005824] Device empty
<6>[ 0.005824] Movable zone start for each node
<6>[ 0.005825] Early memory node ranges
<6>[ 0.005825] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005826] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005826] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005827] node 0: [mem 0x0000000104500000-0x000000087f7fffff]
<6>[ 0.005828] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005833] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005850] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007875] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036325] On node 0, zone Normal: 17664 pages in unavailable ranges
<6>[ 0.036390] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036844] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036850] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.036899] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.036900] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.036902] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.036904] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.036905] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.036916] e820: update [mem 0x68f52000-0x68f6cfff] usable ==> reserved
<6>[ 0.036922] TSC deadline timer available
<6>[ 0.036924] CPU topo: Max. logical packages: 1
<6>[ 0.036924] CPU topo: Max. logical dies: 1
<6>[ 0.036924] CPU topo: Max. dies per package: 1
<6>[ 0.036926] CPU topo: Max. threads per core: 1
<6>[ 0.036926] CPU topo: Num. cores per package: 8
<6>[ 0.036927] CPU topo: Num. threads per package: 8
<6>[ 0.036927] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.036939] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.036940] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.036941] PM: hibernation: Registered nosave memory: [mem 0x68f52000-0x68f6cfff]
<6>[ 0.036942] PM: hibernation: Registered nosave memory: [mem 0x68f71000-0x68f71fff]
<6>[ 0.036942] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.036943] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.036943] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.036944] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.036944] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.036944] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.036945] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.036945] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1044fffff]
<6>[ 0.036946] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.036947] Booting paravirtualized kernel on bare hardware
<6>[ 0.036949] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.036958] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037295] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037300] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037302] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037315] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[ 0.037393] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037406] random: crng init done
<6>[ 0.039244] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040157] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040212] Fallback order for Node 0: 0
<6>[ 0.040214] Built 1 zonelists, mobility grouping on. Total pages: 8289632
<6>[ 0.040215] Policy zone: Normal
<6>[ 0.040224] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[ 0.040225] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040227] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041166] software IO TLB: area num 8.
<4>[ 0.086103] **********************************************************
<4>[ 0.086104] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086104] ** **
<4>[ 0.086104] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086105] ** via the console, logs, and other interfaces. This **
<4>[ 0.086105] ** might reduce the security of your system. **
<4>[ 0.086105] ** **
<4>[ 0.086105] ** If you see this message and you are not debugging **
<4>[ 0.086106] ** the kernel, report this immediately to your system **
<4>[ 0.086106] ** administrator! **
<4>[ 0.086106] ** **
<4>[ 0.086106] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086106] **********************************************************
<6>[ 0.087200] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.087520] ftrace: allocating 59546 entries in 233 pages
<6>[ 0.113317] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114547] Dynamic Preempt: voluntary
<6>[ 0.114996] Running RCU self tests
<6>[ 0.114997] Running RCU synchronous self tests
<6>[ 0.114998] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.114998] rcu: RCU lockdep checking is enabled.
<6>[ 0.114998] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.114999] Trampoline variant of Tasks RCU enabled.
<6>[ 0.114999] Rude variant of Tasks RCU enabled.
<6>[ 0.115000] Tracing variant of Tasks RCU enabled.
<6>[ 0.115000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115039] Running RCU synchronous self tests
<6>[ 0.115044] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115047] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115050] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125067] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.125517] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.125848] Console: colour dummy device 80x25
<6>[ 0.125856] printk: legacy console [tty0] enabled
<6>[ 0.127030] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127037] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127041] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127044] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127048] ... CLASSHASH_SIZE: 4096
<6>[ 0.127051] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127055] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127059] ... CHAINHASH_SIZE: 262144
<6>[ 0.127062] memory used by lock dependency info: 54145 kB
<6>[ 0.127067] memory used for stack traces: 4224 kB
<6>[ 0.127071] per task-struct memory footprint: 1920 bytes
<6>[ 0.127120] ACPI: Core revision 20240827
<6>[ 0.128036] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128100] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128106] DMAR: Host address width 38
<6>[ 0.128109] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128139] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128172] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128196] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128220] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128242] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128276] DMAR: SATC flags: 0x1
<6>[ 0.128284] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128289] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128293] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130134] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.134754] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.134772] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.134847] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.134853] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.135032] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.135037] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.135048] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.135056] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.135061] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.135069] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.135075] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.135090] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.135097] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.135102] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.135107] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.135114] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.135120] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.135126] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.135131] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.135137] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.135766] Freeing SMP alternatives memory: 48K
<6>[ 0.135766] pid_max: default: 32768 minimum: 301
<6>[ 0.135766] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.135766] landlock: Up and running.
<6>[ 0.135766] Yama: becoming mindful.
<6>[ 0.135766] AppArmor: AppArmor initialized
<6>[ 0.135766] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.135766] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.135766] Running RCU synchronous self tests
<6>[ 0.135766] Running RCU synchronous self tests
<6>[ 0.135766] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.135766] Running RCU Tasks wait API self tests
<6>[ 0.135766] Running RCU Tasks Rude wait API self tests
<6>[ 0.135766] Running RCU Tasks Trace wait API self tests
<6>[ 0.135766] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.135766] core: cpu_core PMU driver:
<6>[ 0.135766] ... version: 6
<6>[ 0.135766] ... bit width: 48
<6>[ 0.135766] ... generic registers: 10
<6>[ 0.135766] ... value mask: 0000ffffffffffff
<6>[ 0.135766] ... max period: 00007fffffffffff
<6>[ 0.135766] ... fixed-purpose events: 4
<6>[ 0.135766] ... event mask: 0001000f000003ff
<6>[ 0.135801] signal: max sigframe size: 3632
<6>[ 0.135823] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.135904] rcu: Hierarchical SRCU implementation.
<6>[ 0.135908] rcu: Max phase no-delay instances is 400.
<6>[ 0.136837] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.138611] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.138878] smp: Bringing up secondary CPUs ...
<6>[ 0.139216] smpboot: x86: Booting SMP configuration:
<6>[ 0.139223] .... node #0, CPUs: #1 #2
<6>[ 0.141897] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.146235] #3 #4 #5 #6 #7
<6>[ 0.010067] core: cpu_atom PMU driver:
<6>[ 0.010067] ... version: 6
<6>[ 0.010067] ... bit width: 48
<6>[ 0.010067] ... generic registers: 8
<6>[ 0.010067] ... value mask: 0000ffffffffffff
<6>[ 0.010067] ... max period: 00007fffffffffff
<6>[ 0.010067] ... fixed-purpose events: 6
<6>[ 0.010067] ... event mask: 00000077000000ff
<6>[ 0.158850] smp: Brought up 1 node, 8 CPUs
<6>[ 0.158882] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.160995] Memory: 32360120K/33158528K available (24282K kernel code, 5580K rwdata, 9272K rodata, 5624K init, 68408K bss, 775236K reserved, 0K cma-reserved)
<6>[ 0.161943] devtmpfs: initialized
<6>[ 0.162013] x86/mm: Memory block size: 128MB
<6>[ 0.177805] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.178249] Running RCU synchronous self tests
<6>[ 0.178262] Running RCU synchronous self tests
<6>[ 0.178279] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.178279] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.178279] pinctrl core: initialized pinctrl subsystem
<6>[ 0.179242] PM: RTC time: 11:12:03, date: 2025-03-04
<6>[ 0.180110] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.181064] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.181365] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.181641] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.181699] audit: initializing netlink subsys (disabled)
<5>[ 0.181861] audit: type=2000 audit(1741086723.047:1): state=initialized audit_enabled=0 res=1
<6>[ 0.182416] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.182418] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.182424] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.182429] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.182433] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.182913] EISA bus registered
<6>[ 0.182944] cpuidle: using governor ladder
<6>[ 0.182944] cpuidle: using governor menu
<6>[ 0.182944] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.183239] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.183267] PCI: Using configuration type 1 for base access
<6>[ 0.183900] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.185021] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.185021] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.185021] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.185021] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.204768] raid6: avx2x4 gen() 76516 MB/s
<6>[ 0.221767] raid6: avx2x2 gen() 82561 MB/s
<6>[ 0.238772] raid6: avx2x1 gen() 76921 MB/s
<6>[ 0.238776] raid6: using algorithm avx2x2 gen() 82561 MB/s
<6>[ 0.255767] raid6: .... xor() 57774 MB/s, rmw enabled
<6>[ 0.255772] raid6: using avx2x2 recovery algorithm
<6>[ 0.260307] fbcon: Taking over console
<6>[ 0.260627] ACPI: Added _OSI(Module Device)
<6>[ 0.260636] ACPI: Added _OSI(Processor Device)
<6>[ 0.260642] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.260649] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.835211] ACPI: 32 ACPI AML tables successfully acquired and loaded
<6>[ 0.848714] ACPI: EC: EC started
<6>[ 0.848726] ACPI: EC: interrupt blocked
<6>[ 0.851432] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.851438] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.904011] Callback from call_rcu_tasks() invoked.
<6>[ 1.213641] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.213669] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.252308] ACPI: Interpreter enabled
<6>[ 1.252400] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.252405] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.257727] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.257734] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.355451] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.355658] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.651224] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.651346] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.659842] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 2.055285] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 2.075451] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 2.235772] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 2.237328] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 2.245709] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 2.254820] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.255064] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.255300] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 2.309048] ACPI: \: Can't tag data node
<3>[ 2.310171] ACPI: \: Can't tag data node
<3>[ 2.311288] ACPI: \: Can't tag data node
<3>[ 2.312647] ACPI: \: Can't tag data node
<3>[ 2.313748] ACPI: \: Can't tag data node
<6>[ 2.558370] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.560194] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.561568] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.562947] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.564706] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.568596] ACPI: \PIN_: New power resource
<6>[ 2.578282] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.578322] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.591808] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.617857] PCI host bridge to bus 0000:00
<6>[ 2.617944] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.617967] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.617986] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.618006] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.618026] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.618049] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.626784] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.628470] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.628607] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.628629] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.628651] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.628738] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.632165] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.632236] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 2.635599] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.635674] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.635695] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 2.638221] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.638306] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.638331] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.638367] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.638603] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.638691] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.650905] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.650990] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.651015] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.651051] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.651274] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.651369] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.667300] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.667550] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.667636] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.667760] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.667894] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.667947] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.673701] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.673762] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 2.673789] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.674172] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.674225] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.674240] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 2.675028] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.675122] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 2.675251] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.678132] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.678200] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 2.678211] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 2.678286] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.678292] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.679892] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.679948] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 2.679957] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 2.680020] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.680024] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.681578] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.681637] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 2.681707] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.684053] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.684143] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 2.684245] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.684634] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.684687] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 2.684754] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.686590] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.686654] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 2.686663] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 2.686959] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.687060] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.688453] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.688557] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.690122] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.690237] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.691569] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.691679] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.693248] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.693338] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 2.693439] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.695772] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.695806] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.695814] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.695821] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.695944] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.696000] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.700551] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.700657] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.700688] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.701857] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.702073] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.716028] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.720427] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.720664] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 2.720703] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 2.720930] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.721986] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.722170] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 2.722199] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.725736] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.726035] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.726525] pci 0000:00:1f.6: [8086:550f] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.726705] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.726705] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.729969] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.730346] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.730781] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.731228] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.731349] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.731371] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.731391] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.731665] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.731676] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.732893] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.735924] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.736589] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.736706] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.739989] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.740131] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 3.185089] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 13.023389] Low-power S0 idle used by default for system suspend
<6>[ 13.075897] ACPI: EC: interrupt unblocked
<6>[ 13.075908] ACPI: EC: event unblocked
<6>[ 13.075942] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 13.075948] ACPI: EC: GPE=0x6e
<6>[ 13.075954] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 13.075963] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 13.077011] iommu: Default domain type: Translated
<6>[ 13.077011] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 13.079856] SCSI subsystem initialized
<7>[ 13.079955] libata version 3.00 loaded.
<6>[ 13.080206] ACPI: bus type USB registered
<6>[ 13.080400] usbcore: registered new interface driver usbfs
<6>[ 13.080850] usbcore: registered new interface driver hub
<6>[ 13.080956] usbcore: registered new device driver usb
<6>[ 13.081297] pps_core: LinuxPPS API ver. 1 registered
<6>[ 13.081309] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 13.081361] PTP clock support registered
<6>[ 13.081893] EDAC MC: Ver: 3.0.0
<6>[ 13.084016] efivars: Registered efivars operations
<6>[ 13.088165] NetLabel: Initializing
<6>[ 13.088172] NetLabel: domain hash size = 128
<6>[ 13.088176] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 13.088242] NetLabel: unlabeled traffic allowed by default
<6>[ 13.088255] mctp: management component transport protocol core
<6>[ 13.088260] NET: Registered PF_MCTP protocol family
<6>[ 13.088294] PCI: Using ACPI for IRQ routing
<7>[ 13.107888] PCI: pci_cache_line_size set to 64 bytes
<6>[ 13.108169] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 13.108300] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 13.108310] e820: reserve RAM buffer [mem 0x68f52000-0x6bffffff]
<7>[ 13.108313] e820: reserve RAM buffer [mem 0x68f71000-0x6bffffff]
<7>[ 13.108315] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 13.108318] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 13.108994] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 13.108994] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 13.108994] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 13.108994] vgaarb: loaded
<6>[ 13.109912] clocksource: Switched to clocksource tsc-early
<5>[ 13.111511] VFS: Disk quotas dquot_6.6.0
<6>[ 13.111535] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 13.112499] AppArmor: AppArmor Filesystem Enabled
<6>[ 13.112656] pnp: PnP ACPI init
<6>[ 13.113521] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 13.113532] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 13.114891] system 00:02: [io 0x06a4] has been reserved
<6>[ 13.114900] system 00:02: [io 0x06a0] has been reserved
<6>[ 13.137294] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 13.137306] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 13.137317] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 13.137326] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 13.137337] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[ 13.137346] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 13.137355] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 13.137365] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 13.140487] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 13.143151] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 13.143319] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 13.159309] pnp: PnP ACPI: found 8 devices
<6>[ 13.173644] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 13.174608] NET: Registered PF_INET protocol family
<6>[ 13.174924] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.178282] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 13.178609] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 13.178944] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.180186] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 13.182276] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 13.182933] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 13.184560] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 13.186297] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 13.186409] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 13.186428] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 13.186443] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 13.186520] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 13.186530] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 13.186539] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 13.186550] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 13.186605] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 13.186660] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 13.186710] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 13.186764] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 13.186808] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 13.186823] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 13.186835] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 13.186846] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.186868] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 13.186877] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]
<6>[ 13.186889] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 13.186900] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.186915] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 13.186923] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]
<6>[ 13.186935] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 13.186946] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.186969] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 13.186977] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 13.186988] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 13.187003] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 13.187040] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 13.187113] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 13.187122] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 13.187130] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 13.187138] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 13.187147] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 13.187157] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
<6>[ 13.187164] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 13.187172] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.187182] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff]
<6>[ 13.187189] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 13.187197] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.187207] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff]
<6>[ 13.187214] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 13.187222] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.187232] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 13.187239] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 13.187247] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 13.188720] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 13.191038] PCI: CLS 0 bytes, default 64
<6>[ 13.191190] DMAR: No RMRR found
<6>[ 13.191205] DMAR: No ATSR found
<6>[ 13.191211] DMAR: dmar1: Using Queued invalidation
<6>[ 13.191243] DMAR: dmar0: Using Queued invalidation
<6>[ 13.191257] DMAR: dmar2: Using Queued invalidation
<6>[ 13.192385] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 13.192490] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 13.192578] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 13.192654] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 13.197011] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 13.198664] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 13.198753] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 13.198845] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 13.198923] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 13.199029] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 13.199087] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 13.199139] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 13.199225] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 13.199307] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 13.199396] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 13.199450] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 13.199560] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 13.199615] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 13.199667] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 13.199723] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 13.199802] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 13.199878] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 13.199976] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 13.200110] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 13.200165] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 13.200222] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 13.200279] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 13.200337] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 13.200422] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 13.200521] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 13.213755] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 13.213775] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 13.213783] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 13.220645] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 13.220889] clocksource: Switched to clocksource tsc
<6>[ 13.221760] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 13.228497] Initialise system trusted keyrings
<5>[ 13.228603] Key type blacklist registered
<6>[ 13.229147] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 13.238991] zbud: loaded
<6>[ 13.240405] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 13.240541] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 13.240548] ntfs3: Read-only LZX/Xpress compression included
<5>[ 13.241048] integrity: Platform Keyring initialized
<5>[ 13.241088] integrity: Machine keyring initialized
<6>[ 13.247400] xor: automatically using best checksumming function avx
<5>[ 13.247411] Key type asymmetric registered
<5>[ 13.247425] Asymmetric key parser 'x509' registered
<6>[ 13.247561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 13.248109] io scheduler mq-deadline registered
<6>[ 13.249178] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 13.250937] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 13.251533] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 13.252760] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 13.253292] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 13.254527] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 13.254993] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 13.256099] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 13.256575] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 13.258059] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 13.258637] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 13.259245] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 13.262254] Monitor-Mwait will be used to enter C-1 state
<7>[ 13.262398] Monitor-Mwait will be used to enter C-2 state
<7>[ 13.262454] Monitor-Mwait will be used to enter C-3 state
<6>[ 13.270145] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 13.270350] ACPI: button: Lid Switch [LID0]
<6>[ 13.270601] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 13.270772] ACPI: button: Sleep Button [SLPB]
<6>[ 13.270971] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 13.271366] ACPI: button: Power Button [PWRB]
<6>[ 13.459310] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 13.459374] ACPI: thermal: Thermal Zone [TZ00] (70 C)
<6>[ 13.461976] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 13.462364] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 13.464550] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 13.487507] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 13.522408] serial 0000:00:12.0: enabling device (0000 -> 0002)
<4>[ 13.527889] hpet_acpi_add: no address or irqs in _CRS
<6>[ 13.528102] Linux agpgart interface v0.103
<6>[ 13.565309] ACPI: bus type drm_connector registered
<6>[ 13.596893] loop: module loaded
<6>[ 13.642169] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 13.828343] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 13.975247] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 14.143145] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 14.277909] Key type psk registered
<6>[ 14.284049] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 14.285024] tun: Universal TUN/TAP device driver, 1.6
<6>[ 14.286308] nvme nvme0: pci function 0000:80:00.0
<6>[ 14.289451] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.289610] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 14.292043] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.295103] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.295142] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 14.295173] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.295820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 14.295888] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.295907] usb usb1: Product: xHCI Host Controller
<6>[ 14.295920] usb usb1: Manufacturer: Linux 6.14.0-rc5-xe+ xhci-hcd
<6>[ 14.295935] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 14.298929] hub 1-0:1.0: USB hub found
<6>[ 14.299093] hub 1-0:1.0: 1 port detected
<6>[ 14.306021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 14.306049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.306136] usb usb2: Product: xHCI Host Controller
<6>[ 14.306150] usb usb2: Manufacturer: Linux 6.14.0-rc5-xe+ xhci-hcd
<6>[ 14.306165] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 14.307954] hub 2-0:1.0: USB hub found
<6>[ 14.308035] hub 2-0:1.0: 3 ports detected
<6>[ 14.330271] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 14.345637] nvme0n1: p1 p2
<6>[ 14.355008] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.355060] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 14.357625] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.360474] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.360509] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 14.360537] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.360879] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 14.360901] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.360917] usb usb3: Product: xHCI Host Controller
<6>[ 14.360929] usb usb3: Manufacturer: Linux 6.14.0-rc5-xe+ xhci-hcd
<6>[ 14.360944] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 14.362544] hub 3-0:1.0: USB hub found
<6>[ 14.362629] hub 3-0:1.0: 8 ports detected
<6>[ 14.413960] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 14.413971] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.413977] usb usb4: Product: xHCI Host Controller
<6>[ 14.413981] usb usb4: Manufacturer: Linux 6.14.0-rc5-xe+ xhci-hcd
<6>[ 14.413986] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 14.414936] hub 4-0:1.0: USB hub found
<6>[ 14.414968] hub 4-0:1.0: 2 ports detected
<6>[ 14.419081] usbcore: registered new interface driver usb-storage
<6>[ 14.419165] usbcore: registered new interface driver usbserial_generic
<6>[ 14.419226] usbserial: USB Serial support registered for generic
<6>[ 14.419259] usbcore: registered new interface driver ftdi_sio
<6>[ 14.419280] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 14.419317] usbcore: registered new interface driver pl2303
<6>[ 14.419340] usbserial: USB Serial support registered for pl2303
<6>[ 14.419415] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 14.419421] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 15.131746] i8042: Can't read CTR while initializing i8042
<3>[ 15.131754] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 15.132699] mousedev: PS/2 mouse device common for all mice
<6>[ 15.135625] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 15.139019] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 15.139295] rtc_cmos rtc_cmos: setting system clock to 2025-03-04T11:12:18 UTC (1741086738)
<6>[ 15.139574] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 15.139660] i2c_dev: i2c /dev entries driver
<6>[ 15.148859] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 15.148887] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 15.148905] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 15.148967] device-mapper: uevent: version 1.0.3
<6>[ 15.149564] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 15.150264] platform eisa.0: Probing EISA bus 0
<4>[ 15.150344] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 15.150394] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 15.150418] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 15.150442] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 15.150461] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 15.150481] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 15.150504] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 15.150528] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 15.150551] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 15.150566] platform eisa.0: EISA: Detected 0 cards
<6>[ 15.150580] intel_pstate: Intel P-state driver initializing
<6>[ 15.154423] Hybrid CPU capacity scaling enabled
<6>[ 15.155989] intel_pstate: HWP enabled
<6>[ 15.155997] sdhci: Secure Digital Host Controller Interface driver
<6>[ 15.156007] sdhci: Copyright(c) Pierre Ossman
<6>[ 15.156157] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 15.159695] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 15.160764] drop_monitor: Initializing network drop monitor service
<6>[ 15.161045] NET: Registered PF_INET6 protocol family
<6>[ 15.164909] Segment Routing with IPv6
<6>[ 15.164970] In-situ OAM (IOAM) with IPv6
<6>[ 15.165029] NET: Registered PF_PACKET protocol family
<5>[ 15.165312] Key type dns_resolver registered
<4>[ 15.170170] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 15.170679] microcode: Current revision: 0x0000011c
<6>[ 15.171530] IPI shorthand broadcast: enabled
<6>[ 15.182139] sched_clock: Marking stable (15173000979, 9067585)->(15261704700, -79636136)
<6>[ 15.182918] registered taskstats version 1
<5>[ 15.184093] Loading compiled-in X.509 certificates
<6>[ 15.211515] Demotion targets for Node 0: null
<6>[ 15.211734] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 15.211740] kmemleak: Automatic memory scanning thread started
<5>[ 15.211925] Key type .fscrypt registered
<5>[ 15.211931] Key type fscrypt-provisioning registered
<6>[ 15.214530] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 15.214644] Key type trusted registered
<5>[ 15.217457] Key type encrypted registered
<6>[ 15.217464] AppArmor: AppArmor sha256 policy hashing enabled
<5>[ 15.217556] Loading compiled-in module X.509 certificates
<5>[ 15.218144] Loaded X.509 cert 'Build time autogenerated kernel key: 63968181221c5985cce6ec82dc95d0831fe49625'
<6>[ 15.218157] ima: Allocated hash algorithm: sha256
<6>[ 15.236461] ima: No architecture policies found
<6>[ 15.236593] evm: Initialising EVM extended attributes:
<6>[ 15.236599] evm: security.selinux
<6>[ 15.236603] evm: security.SMACK64
<6>[ 15.236608] evm: security.SMACK64EXEC
<6>[ 15.236612] evm: security.SMACK64TRANSMUTE
<6>[ 15.236617] evm: security.SMACK64MMAP
<6>[ 15.236621] evm: security.apparmor
<6>[ 15.236625] evm: security.ima
<6>[ 15.236629] evm: security.capability
<6>[ 15.236633] evm: HMAC attrs: 0x1
<6>[ 15.239036] PM: Magic number: 1:614:225
<6>[ 15.239174] memory memory107: hash matches
<6>[ 15.239276] printk: legacy console [netcon0] enabled
<6>[ 15.239283] netconsole: network logging started
<6>[ 15.239974] RAS: Correctable Errors collector initialized.
<6>[ 15.240205] clk: Disabling unused clocks
<6>[ 15.240216] PM: genpd: Disabling unused power domains
<6>[ 15.240848] md: Waiting for all devices to be available before autodetect
<6>[ 15.240854] md: If you don't use raid, use raid=noautodetect
<6>[ 15.240860] md: Autodetecting RAID arrays.
<6>[ 15.240868] md: autorun ...
<6>[ 15.240872] md: ... autorun DONE.
<6>[ 15.282946] EXT4-fs (nvme0n1p2): mounted filesystem d94563f3-71a5-4472-983a-b9d25270145b ro with ordered data mode. Quota mode: none.
<6>[ 15.283018] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 15.283552] devtmpfs: mounted
<6>[ 15.295407] Freeing unused decrypted memory: 2028K
<6>[ 15.296265] Freeing unused kernel image (initmem) memory: 5624K
<6>[ 15.296287] Write protecting the kernel read-only data: 34816k
<6>[ 15.296787] Freeing unused kernel image (text/rodata gap) memory: 292K
<6>[ 15.297118] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[ 15.301491] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 15.301515] Run /sbin/init as init process
<7>[ 15.301519] with arguments:
<7>[ 15.301520] /sbin/init
<7>[ 15.301521] with environment:
<7>[ 15.301522] HOME=/
<7>[ 15.301522] TERM=linux
<7>[ 15.301523] BOOT_IMAGE=/boot/drm_intel
<7>[ 15.347217] systemd[1]: Inserted module 'autofs4'
<7>[ 15.366270] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 15.366325] systemd[1]: Detected architecture x86-64.
<7>[ 15.368033] systemd[1]: Hostname set to <shard-lnl-6>.
<7>[ 15.637182] systemd[1]: Queued start job for default target graphical.target.
<7>[ 15.676346] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.678669] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.680182] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.680421] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.681020] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 15.681140] systemd[1]: Expecting device dev-disk-by\x2duuid-BBCC\x2dD8CD.device - /dev/disk/by-uuid/BBCC-D8CD...
<7>[ 15.681229] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 15.681312] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 15.681381] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 15.681444] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 15.681510] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 15.681752] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 15.682137] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 15.682400] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 15.682693] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 15.682931] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 15.683123] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 15.683418] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 15.683713] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 15.683975] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 15.684234] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.684505] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 15.684753] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 15.713879] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 15.719847] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 15.724198] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 15.727384] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 15.732373] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 15.735695] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 15.739146] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 15.743004] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 15.746234] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 15.749623] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 15.752675] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 15.759498] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 15.762703] systemd-journald[210]: Collecting audit messages is disabled.
<7>[ 15.764304] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 15.769412] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 15.775330] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 15.777210] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 15.779078] pstore: Using crash dump compression: deflate
<6>[ 15.782156] pstore: Registered efi_pstore as persistent store backend
<7>[ 15.782186] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 15.786760] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 15.786874] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.786938] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.790471] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 15.791231] fuse: init (API version 7.42)
<7>[ 15.796879] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.964663] EXT4-fs (nvme0n1p2): re-mounted d94563f3-71a5-4472-983a-b9d25270145b r/w. Quota mode: none.
<6>[ 16.002321] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:306577408k SS
<7>[ 16.019183] systemd-journald[210]: Received client request to flush runtime journal.
<7>[ 16.035095] systemd-journald[210]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 16.035114] systemd-journald[210]: Rotating system journal.
<4>[ 16.645800] nvme nvme0: using unchecked data buffer
<4>[ 16.801844] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.801869] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.801893] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.801918] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.801942] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.801967] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.801992] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802016] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802041] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802065] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802169] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802188] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802212] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802237] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802262] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802286] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802311] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802347] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802371] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802396] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802420] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802445] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802470] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802494] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802519] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802547] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802568] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802611] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802631] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802655] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802680] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802705] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802740] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802763] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802788] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802813] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802837] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.802862] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.808570] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 16.839595] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:01, deferring
<4>[ 16.843806] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.843829] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.843854] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.843879] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.843903] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.843928] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.843964] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.843988] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844110] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844161] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844188] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844219] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844286] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844310] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844335] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844363] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844388] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844408] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844432] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844457] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844482] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844506] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844531] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844556] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844580] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844605] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844629] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844654] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844679] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.844703] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.863426] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<4>[ 16.867502] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867527] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867546] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867566] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867586] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867606] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867626] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867686] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867706] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867726] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867746] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867766] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867786] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867806] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867818] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867838] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867858] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867878] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867918] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867938] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867958] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.867978] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868022] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868043] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868063] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868114] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868134] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868154] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868174] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868196] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868216] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868235] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868255] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868275] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868295] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868316] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868335] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868355] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.868375] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.889292] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 16.889657] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 16.905909] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.905933] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.916031] pci 0000:00:05.0: Setting to D3hot
<3>[ 16.921820] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 16.926225] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 16.927359] pci 0000:00:0b.0: Setting to D3hot
<4>[ 16.939232] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.939424] intel_pmc_core INT33A1:00: initialized
<4>[ 16.950432] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950456] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950476] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950496] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950516] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950536] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950556] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950576] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950588] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950632] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950652] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950692] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950712] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950743] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950763] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950783] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950803] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950836] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950858] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950878] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950898] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950920] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950940] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950960] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.950980] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951013] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951046] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951066] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951092] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951125] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951145] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951165] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951185] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951205] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951225] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951245] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951265] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951285] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951305] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951325] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951345] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951364] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951385] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951404] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.951424] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[ 16.952043] audit: type=1400 audit(1741086740.310:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=433 comm="apparmor_parser"
<5>[ 16.952587] audit: type=1400 audit(1741086740.311:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=434 comm="apparmor_parser"
<5>[ 16.952895] audit: type=1400 audit(1741086740.311:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=431 comm="apparmor_parser"
<5>[ 16.953483] audit: type=1400 audit(1741086740.312:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=429 comm="apparmor_parser"
<5>[ 16.956885] audit: type=1400 audit(1741086740.315:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=435 comm="apparmor_parser"
<5>[ 16.960351] audit: type=1400 audit(1741086740.319:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=436 comm="apparmor_parser"
<5>[ 16.963460] audit: type=1400 audit(1741086740.322:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=437 comm="apparmor_parser"
<5>[ 16.965477] audit: type=1400 audit(1741086740.324:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=438 comm="apparmor_parser"
<5>[ 16.969150] audit: type=1400 audit(1741086740.327:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=439 comm="apparmor_parser"
<5>[ 16.970033] audit: type=1400 audit(1741086740.328:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=440 comm="apparmor_parser"
<6>[ 17.335347] ACPI: bus type thunderbolt registered
<6>[ 17.346656] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 17.389096] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 17.389100] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 17.389207] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 17.399609] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 17.399615] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 17.402580] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 17.403320] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 17.427528] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 17.450805] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 17.451312] intel_rapl_common: Found RAPL domain package
<6>[ 17.451318] intel_rapl_common: Found RAPL domain dram
<6>[ 17.467624] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 17.478925] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 17.484761] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 17.484910] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 17.552360] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 17.552368] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 17.552369] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 17.552371] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 17.552372] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 17.552373] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 17.561737] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 17.562338] cryptd: max_cpu_qlen set to 1000
<6>[ 17.573455] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:15:be, XID 541, IRQ 176
<6>[ 17.573464] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<4>[ 17.609578] block nvme0n1: No UUID available providing old NGUID
<6>[ 17.634977] AES CTR mode by8 optimization enabled
<6>[ 17.840358] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 17.890552] evm: overlay not supported
<6>[ 18.003487] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:92
<6>[ 18.003493] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 18.003744] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 18.111976] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 18.138119] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 18.138129] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 18.138132] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 18.188662] loop0: detected capacity change from 0 to 8
<6>[ 18.229895] intel_rapl_common: Found RAPL domain package
<6>[ 18.229902] intel_rapl_common: Found RAPL domain core
<6>[ 18.230208] intel_rapl_common: Found RAPL domain uncore
<6>[ 18.230210] intel_rapl_common: Found RAPL domain dram
<6>[ 18.230212] intel_rapl_common: Found RAPL domain psys
<4>[ 18.371434] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 18.444919] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 18.460060] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[ 18.474054] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 18.474088] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 18.749050] Consider using thermal netlink events interface
<6>[ 18.833199] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 18.967385] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 19.138805] hid: raw HID events driver (C) Jiri Kosina
<6>[ 19.145322] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 19.179486] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.180622] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.181908] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.182597] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.183749] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.184321] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.190445] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.194378] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.198618] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.201375] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.204874] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.207725] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.886674] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 19.886700] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 20.805227] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 20.805249] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 22.655178] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 29.326948] systemd-journald[210]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 50.157018] [IGT] xe_module_load: executing
<7>[ 50.166747] [IGT] xe_module_load: starting subtest load
<5>[ 50.363960] Setting dangerous option force_probe - tainting kernel
<6>[ 50.366874] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 50.368421] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 50.368433] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 50.368521] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 50.368600] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 50.372154] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 50.376038] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 50.376149] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 50.376234] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 50.376314] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 50.376390] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 50.376448] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 50.376503] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 50.376556] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 50.376607] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 50.376657] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 50.376706] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 50.376755] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 50.376803] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 50.376851] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 50.376899] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.376991] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 50.378271] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 50.378357] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 50.383119] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 50.383224] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000092 [0x49/00]
<7>[ 50.383319] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 50.386118] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.387140] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 50.387273] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 50.387436] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 50.387556] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 50.387671] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 50.387791] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.387913] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 50.388818] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 50.393654] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 50.393889] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 50.394116] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 50.394313] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 50.394536] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 50.394725] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 50.394901] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 50.395118] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 50.395289] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 50.395451] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 50.395609] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 50.395766] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 50.395922] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 50.396117] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 50.398656] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 50.402732] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 50.404089] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 50.404286] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.404525] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 50.406425] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 50.406631] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7>[ 50.406786] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 50.426402] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.426846] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 50.427036] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 50.427259] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 50.427435] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 50.427611] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 50.427819] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.428002] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 50.428781] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 50.429150] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 50.429450] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6feec018
<7>[ 50.429761] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 50.430045] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 50.430312] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 50.430546] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 50.430769] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 50.431029] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 50.431267] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 50.431542] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 50.431836] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 50.432114] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 50.432392] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 50.432692] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 50.432959] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 50.433239] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 50.433518] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 50.433767] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.434012] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.434284] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 50.434527] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.434772] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.435062] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.435333] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 50.435557] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.435808] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.436025] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.436249] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 50.436447] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.436637] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.436848] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.437028] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 50.437241] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.437402] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.437560] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.437714] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 50.437877] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.438033] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.438201] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.438339] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 50.438988] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 50.439219] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 50.439413] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 50.439596] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 50.439809] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 50.439998] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 50.440240] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 50.440426] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 50.440621] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 50.440817] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 50.440988] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 50.441191] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 50.441360] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 50.441526] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 50.441693] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 50.441862] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 50.442028] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 50.442220] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 50.442433] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 50.442630] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.442856] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.443048] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.443281] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 50.443467] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 50.443653] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.443835] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.444068] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.444327] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 50.444623] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.444956] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 50.445281] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.445589] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 50.445924] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 50.446244] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 50.446542] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 50.446786] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.447084] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 50.447334] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 50.447382] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 50.447679] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 50.447917] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 50.448165] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 50.449200] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 50.449522] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 50.450776] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 50.451034] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 50.451299] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 50.451501] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 50.451685] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 50.451882] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 50.452085] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 50.452242] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 50.454284] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 50.454462] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 50.454624] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 50.454772] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 50.454913] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 50.455047] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 50.455205] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 50.455332] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 50.455454] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.455577] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 50.455693] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.455807] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 50.455922] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.456035] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 50.456159] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 50.456261] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 50.456359] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.456454] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 50.456548] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.456641] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 50.456732] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.456818] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 50.456912] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 50.457000] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 50.457090] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.457175] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 50.457260] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.457344] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 50.457428] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.457512] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 50.461492] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 50.465496] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.465625] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 50.465846] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 50.466217] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 50.466604] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 50.467057] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 50.467346] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 50.467594] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 50.467880] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 50.468185] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 50.468426] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<6>[ 50.468554] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 50.468661] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 50.468882] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 50.469110] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 50.469448] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 50.469723] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.469968] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.470265] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.470532] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.470754] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.471002] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.471328] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 50.472331] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 50.472633] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 50.474782] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 50.475486] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 50.477085] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 50.478741] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 50.479978] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 50.483479] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 50.494214] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 50.494232] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.494235] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.494237] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 50.494242] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.494244] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 50.494252] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.494254] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 50.494258] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.494306] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.494308] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.494310] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.494322] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 50.494978] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 50.495858] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 50.495980] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 50.496127] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 50.496275] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 50.496436] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.496541] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.496644] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.496734] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.496813] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.496923] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.497112] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 50.497320] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.497452] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 50.497754] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 50.497870] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.497982] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 50.498204] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 50.498362] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.498481] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 50.498878] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 50.498997] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 50.499124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 50.499230] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 50.499333] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 50.499426] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 50.499503] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 50.499581] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 50.499660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 50.499737] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 50.499814] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 50.499890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 50.499967] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 50.500046] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 50.500139] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 50.500237] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 50.500330] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 50.500414] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 50.500487] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 50.500555] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 50.500624] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 50.501389] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 50.501493] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 50.501568] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 50.501644] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 50.501710] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.501774] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.501838] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.501904] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 50.501975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 50.502039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.502117] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.502198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.502288] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 50.502382] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 50.502454] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.502520] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.502585] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.502673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 50.502748] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 50.502814] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 50.502878] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 50.503080] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 50.503158] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 50.503237] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 50.503314] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 50.503388] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 50.503448] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 50.503509] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 50.503599] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 50.503668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 50.503734] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 50.503799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 50.503864] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 50.503928] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 50.503990] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 50.504084] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 50.504166] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 50.504247] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 50.504325] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 50.504398] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 50.504457] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 50.504515] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 50.504632] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 50.504722] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 50.504904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 50.504990] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 50.505079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 50.505184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 50.505290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 50.505393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 50.505472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 50.505550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 50.505628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 50.505704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 50.505781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 50.505855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 50.505928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 50.506000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 50.506078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 50.506169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 50.506263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 50.506357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 50.506435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.506507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.506580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.506652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.506727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.506804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 50.506879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 50.506950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 50.507020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 50.507095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 50.507184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 50.507272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 50.507358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 50.507431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.507495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.507559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.507622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.507686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.507748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.507810] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.507872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.507933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.507995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.508058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 50.508147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 50.508390] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 50.508475] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.508550] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.508788] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 50.508873] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 50.534392] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 50.598192] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 50.739152] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 50.739155] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 50.739156] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 50.739259] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 50.739363] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 50.739458] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 50.739537] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 50.739631] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 50.739718] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 50.739813] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 50.739883] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 50.739956] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 50.740024] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 50.740789] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 50.740867] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 50.740948] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 50.741023] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 50.741100] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 50.741172] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 50.741243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 50.741316] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 50.741386] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 50.741454] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 50.741523] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 50.741588] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 50.741651] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 50.741714] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 50.741776] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 50.741837] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 50.741898] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 50.741960] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 50.742020] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 50.742086] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 50.742145] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 50.742205] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 50.742264] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 50.742323] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 50.742382] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 50.742440] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 50.742503] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 50.742564] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 50.742626] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 50.742685] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 50.742744] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 50.742806] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 50.742868] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 50.742927] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 50.742986] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 50.743043] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 50.743117] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 50.743180] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 50.743487] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 50.743548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 50.743608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 50.743832] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 50.743888] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 50.743939] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 50.744260] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 50.744328] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 50.744396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 50.744456] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 50.744508] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 50.744559] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 50.744870] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 50.744934] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 50.744995] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 50.745054] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 50.745125] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 50.745186] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 50.745253] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 50.745318] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 50.745380] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 50.745440] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 50.745498] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 50.745548] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 50.745596] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 50.745644] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 50.745709] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 50.745840] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 50.748546] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 50.761665] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 50.762528] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 50.762609] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 50.772311] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.772705] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 50.773723] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 50.773816] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 50.773896] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 50.773970] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 50.774042] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 50.774127] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 50.774197] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 50.774263] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 50.774331] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 50.777140] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 50.777236] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 50.777319] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 50.779307] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 50.782296] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 50.782300] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 50.782301] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 50.782302] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 50.782303] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 50.782305] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 50.782306] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 50.782307] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 50.782308] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 50.782309] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 50.782338] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 50.782468] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 50.782575] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 50.783179] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 50.783280] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 50.783380] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 50.783463] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 50.783540] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 50.783618] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 50.783692] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 50.783770] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[ 50.783843] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[ 50.783917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[ 50.783994] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 50.784086] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 50.784172] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 50.784260] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 50.784347] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 50.784427] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 50.784502] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 50.784574] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 50.784644] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 50.784713] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 50.784782] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 50.784851] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 50.784919] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 50.784985] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 50.785053] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 50.785147] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 50.785226] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 50.785293] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 50.785360] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 50.785442] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 50.786132] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 50.786248] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 50.786632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 50.786736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 50.787265] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 50.787366] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 50.787461] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 50.787553] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 50.787643] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 50.787733] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 50.787823] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 50.787910] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 50.787995] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 50.788089] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 50.788172] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 50.788254] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 50.788333] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 50.788412] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 50.788529] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 50.788655] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 50.805882] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 50.806797] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 50.806942] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 50.826402] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.826877] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 50.828192] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 50.830339] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 50.833027] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 50.875687] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 50.877936] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 50.878402] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 50.878804] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 50.879183] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 50.879538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 50.879903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 50.880274] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 50.880607] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 50.880927] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 50.882625] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 50.883150] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 50.883474] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 50.894296] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 50.905509] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 50.913206] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 50.914090] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 50.917348] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 50.917469] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 50.918322] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 50.919581] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 50.919637] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 50.920087] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 50.920893] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 50.920943] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 50.921438] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 50.922593] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 50.922648] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 50.922695] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 50.932880] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 50.935449] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 50.936367] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 50.936499] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 50.937904] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 50.937989] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 50.938068] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 50.938174] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 50.938374] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 50.938567] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 50.938581] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 50.939203] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 50.939728] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 50.939859] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 50.939979] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 50.940214] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 50.940220] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.940222] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.940223] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 50.940226] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.940227] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 50.940231] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.940232] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 50.940235] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.940255] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 50.940372] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 50.941046] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 50.941171] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 50.942164] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 50.942366] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.942368] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.942369] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.942398] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 50.942411] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 50.942422] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 50.942432] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 50.942612] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 50.942750] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 50.942761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 50.942770] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 50.942779] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 50.942938] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 50.943066] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 50.943092] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 50.943101] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 50.943109] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 50.943255] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 50.943381] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 50.943390] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 50.943398] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 50.943402] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 50.943405] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 50.943407] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 50.943488] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 50.943500] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 50.943504] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 50.943507] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 50.943510] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 50.943523] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 50.943682] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 50.943744] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 50.943740] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 50.943914] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 50.944025] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 50.944298] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 50.950723] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d97000
<6>[ 50.951531] fbcon: xedrmfb (fb0) is primary device
<7>[ 50.952333] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 50.952457] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 50.952552] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 50.952651] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 50.952746] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 50.952841] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 50.952935] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 50.953026] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 50.953178] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 50.953300] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 50.953417] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 50.953515] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 50.953599] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 50.953680] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 50.953759] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 50.953836] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 50.953911] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 50.953985] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 50.954058] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 50.954171] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 50.954267] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 50.954360] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 50.954440] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 50.954514] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 50.954583] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 50.954651] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 50.954719] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 50.954786] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 50.954853] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 50.954933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 50.955015] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 50.955156] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 50.955275] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 50.955390] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 50.955476] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 50.955549] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 50.955621] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.955691] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.955761] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.955829] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.955898] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.955965] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956032] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956117] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956203] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.956296] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956386] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956460] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956526] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.956592] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956659] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956725] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956790] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.956854] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956917] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.956978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.957041] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 50.957152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 50.957263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 50.957372] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 50.957456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 50.957538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 50.957634] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 50.957744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 50.957841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 50.957928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 50.958013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 50.958105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 50.958208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 50.958306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 50.958399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 50.958478] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 50.958551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 50.958623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 50.958694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 50.958764] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 50.958833] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 50.958901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 50.958969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 50.959036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 50.959116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 50.959203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 50.959289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 50.959375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 50.959446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 50.959516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 50.959589] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 50.959662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 50.959734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 50.959804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.959872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.959939] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.960006] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 50.960078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 50.960162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 50.960252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 50.960338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 50.960412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 50.960482] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 50.960548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 50.960611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.960673] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.960734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.960796] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.960856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.960915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.960979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.961046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.961134] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.961223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.961311] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 50.961396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 50.961460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 50.961524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 50.961587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 50.961648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 50.961711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 50.961770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<6>[ 50.979508] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 50.979644] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 50.982336] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7>[ 51.002367] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 51.191159] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 51.192235] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 51.195761] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 51.196158] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.196500] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.196935] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 51.197349] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 51.249337] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.249695] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.280324] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 51.280855] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 51.280830] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.282017] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.282032] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 51.282465] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 51.282794] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.283067] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 51.283359] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 51.283633] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 51.283875] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.284144] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 51.284391] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 51.284645] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 51.284906] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 51.284919] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.285159] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 51.285402] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 51.285615] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.285824] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 51.286030] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 51.286271] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 51.286576] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.288245] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 51.288565] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining)
<7>[ 51.412411] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 51.790358] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 51.790865] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 51.791337] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 51.791754] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 51.827547] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 51.828122] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 51.828624] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 51.829119] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.006951] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.006951] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.006951] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.083589] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.086494] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 52.086855] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 52.090243] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 52.091524] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 52.092693] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 52.093849] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 52.094967] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 52.096445] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 52.096750] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 52.098457] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 52.098752] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 52.099519] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 52.100006] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 52.100352] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 52.100738] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 52.102459] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 52.102479] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 52.102768] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 52.116960] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 52.119510] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.119967] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 52.121433] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 52.124167] Console: switching to colour frame buffer device 180x56
<6>[ 52.139065] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 52.150274] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 52.150912] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 52.151387] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 52.151291] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 52.151724] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.151642] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 52.151934] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 52.152253] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 52.152530] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 52.152765] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 52.152842] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 52.152814] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.153110] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 52.153364] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 52.153609] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 52.153849] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 52.154095] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 52.154381] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 52.154613] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 52.154722] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.154840] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 52.155133] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 52.155381] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 52.155630] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 52.155637] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.155935] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 52.156007] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.156222] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 52.156465] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 52.156440] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.157414] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.157429] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.157433] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.157435] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.157441] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.157444] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.157466] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.157469] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.157476] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.157524] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 52.157665] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 52.157834] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.157954] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 52.158331] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 52.158664] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 52.159019] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 52.159343] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 52.160314] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.160560] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 52.162716] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.162721] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.162723] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.162810] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 52.162854] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.162882] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 52.162907] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.163386] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.163786] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.164156] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 52.164571] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.164843] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 52.164861] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 52.164876] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.164916] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 52.165116] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.165320] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 52.165335] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 52.165348] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.165566] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.165750] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 52.165763] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 52.165770] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 52.165775] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 52.165778] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 52.166693] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.166737] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 52.166745] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 52.166752] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 52.166760] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 52.166812] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.172598] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 52.172938] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 52.184535] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 52.250712] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 52.254356] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 52.254629] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 52.255126] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 52.267363] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 52.267459] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 52.267540] [IGT] xe_module_load: exiting, ret=0
<7>[ 52.270119] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.270256] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.270356] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 52.291591] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 52.291697] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 52.294956] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.295046] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.295146] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.295234] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.295319] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.295403] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.295478] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.295546] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.295614] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.295680] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.295747] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.295814] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.295878] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.295942] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.296005] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.296068] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.296213] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.296289] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.296364] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.296438] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.296512] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.296581] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.296642] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.296703] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.296771] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.296844] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.296917] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.296990] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.297062] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.297201] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.297285] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.297368] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.297451] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.297528] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.297603] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.297672] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 52.304959] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 52.307971] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 52.308629] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 52.309659] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 53.222236] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.222250] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.222272] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.470561] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 54.696667] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 54.697271] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067