<5>[    0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Mon Mar  3 01:02:29 UTC 2025
<6>[    0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[    0.000000] KERNEL supported cpus:
<6>[    0.000000]   Intel GenuineIntel
<6>[    0.000000]   AMD AuthenticAMD
<6>[    0.000000]   Hygon HygonGenuine
<6>[    0.000000]   Centaur CentaurHauls
<6>[    0.000000]   zhaoxin   Shanghai  
<6>[    0.000000] x86/tme: not enabled by BIOS
<6>[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[    0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[    0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] APIC: Static calls initialized
<6>[    0.000000] efi: EFI v2.7 by Intel
<6>[    0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000 
<6>[    0.000000] efi: Remove mem281: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[    0.000000] efi: Remove mem283: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[    0.000000] SMBIOS 3.8 present.
<6>[    0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[    0.000000] DMI: Memory slots populated: 8/8
<6>[    0.000000] tsc: Detected 3100.000 MHz processor
<6>[    0.000000] tsc: Detected 3110.400 MHz TSC
<7>[    0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[    0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[    0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[    0.000017] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[    0.000019] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
<6>[    0.000377] x2apic: enabled by BIOS, switching to x2apic ops
<6>[    0.000378] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[    0.004670] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[    0.004678] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[    0.004697] Using GB pages for direct mapping
<6>[    0.005339] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[    0.005340] printk: early log buf free: 258912(98%)
<6>[    0.005340] Secure boot disabled
<6>[    0.005342] ACPI: Early table checksum verification disabled
<6>[    0.005345] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[    0.005348] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005352] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL  LNL      00000002      01000013)
<6>[    0.005355] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL  LNL      00000002      01000013)
<6>[    0.005357] ACPI: FACS 0x000000006FEF1000 000040
<6>[    0.005358] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[    0.005360] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef  Cpu0Ist  00003000 INTL 20210930)
<6>[    0.005361] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef  Cpu0Hwp  00003000 INTL 20210930)
<6>[    0.005362] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20210930)
<6>[    0.005364] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20210930)
<6>[    0.005365] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef  ApIst    00003000 INTL 20210930)
<6>[    0.005367] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef  ApHwp    00003000 INTL 20210930)
<6>[    0.005368] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef  ApPsd    00003000 INTL 20210930)
<6>[    0.005369] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef  ApCst    00003000 INTL 20210930)
<6>[    0.005371] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt  00003000 INTL 20210930)
<6>[    0.005372] ACPI: DTPR 0x000000006FFEC000 000090 (v01                 00000000      00000000)
<6>[    0.005374] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL  PDatTabl 00001000 INTL 20210930)
<6>[    0.005375] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL  IgfxSsdt 00003000 INTL 20210930)
<6>[    0.005377] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL  TseSsdt  00001000 INTL 20210930)
<6>[    0.005378] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL  TcssSsdt 00001000 INTL 20210930)
<6>[    0.005380] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL  IpuSsdt  00001000 INTL 20210930)
<6>[    0.005381] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL  LnlMRvp1 00001000 INTL 20210930)
<6>[    0.005383] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL  I2Pm_Rvp 00001000 INTL 20210930)
<6>[    0.005384] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL  Ther_Rvp 00001000 INTL 20210930)
<6>[    0.005385] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005387] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005388] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL  LNL      00000000      01000013)
<6>[    0.005390] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005391] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL  PepoSsdt 00001000 INTL 20210930)
<6>[    0.005392] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[    0.005394] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[    0.005395] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005397] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL  PtidDevc 00001000 INTL 20210930)
<6>[    0.005398] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL  TbtTypeC 00000000 INTL 20210930)
<6>[    0.005400] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005401] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005402] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005404] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL  UsbCTabl 00001000 INTL 20210930)
<6>[    0.005405] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL  EcSsdt   00000000 INTL 20210930)
<6>[    0.005407] ACPI: ECDT 0x000000006FF85000 000069 (v01        LNL      00000002      01000013)
<6>[    0.005408] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005409] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005411] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL  xh_lnl_m 00000000 INTL 20210930)
<6>[    0.005412] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe   00003000 INTL 20210930)
<6>[    0.005414] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn   00003000 INTL 20210930)
<6>[    0.005415] ACPI: SDEV 0x000000006FFA9000 000046 (v01                 00000000      00000000)
<6>[    0.005417] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL  St09Ssdt 00001000 INTL 20210930)
<6>[    0.005418] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL  Cnv_Ssdt 00001000 INTL 20210930)
<6>[    0.005420] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL  LNL      00000002      01000013)
<6>[    0.005421] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL  LNL      00000005 MSFT 0100000D)
<6>[    0.005422] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005424] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[    0.005425] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[    0.005425] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[    0.005425] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[    0.005426] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[    0.005426] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[    0.005426] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[    0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[    0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[    0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[    0.005428] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[    0.005428] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[    0.005428] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[    0.005429] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[    0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[    0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[    0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[    0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[    0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[    0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[    0.005431] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[    0.005431] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[    0.005431] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[    0.005432] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[    0.005432] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[    0.005432] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[    0.005434] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[    0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[    0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[    0.005435] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[    0.005435] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[    0.005435] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[    0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[    0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[    0.005436] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[    0.005437] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[    0.005437] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[    0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[    0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[    0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[    0.005438] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[    0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[    0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[    0.005439] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[    0.005439] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[    0.005440] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[    0.005508] APIC: Switched APIC routing to: cluster x2apic
<6>[    0.005710] No NUMA configuration found
<6>[    0.005711] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[    0.005716] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[    0.005825] Zone ranges:
<6>[    0.005826]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
<6>[    0.005827]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
<6>[    0.005827]   Normal   [mem 0x0000000100000000-0x000000087f7fffff]
<6>[    0.005828]   Device   empty
<6>[    0.005829] Movable zone start for each node
<6>[    0.005829] Early memory node ranges
<6>[    0.005830]   node   0: [mem 0x0000000000001000-0x000000000009efff]
<6>[    0.005830]   node   0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[    0.005831]   node   0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[    0.005831]   node   0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[    0.005833] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[    0.005837] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[    0.005854] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[    0.007880] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[    0.036476] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[    0.036542] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[    0.037015] ACPI: PM-Timer IO Port: 0x1808
<6>[    0.037021] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[    0.037072] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[    0.037074] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[    0.037075] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[    0.037077] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[    0.037078] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[    0.037089] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[    0.037095] TSC deadline timer available
<6>[    0.037097] CPU topo: Max. logical packages:   1
<6>[    0.037097] CPU topo: Max. logical dies:       1
<6>[    0.037097] CPU topo: Max. dies per package:   1
<6>[    0.037099] CPU topo: Max. threads per core:   1
<6>[    0.037099] CPU topo: Num. cores per package:     8
<6>[    0.037099] CPU topo: Num. threads per package:   8
<6>[    0.037100] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[    0.037112] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[    0.037113] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[    0.037114] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[    0.037115] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[    0.037116] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[    0.037116] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[    0.037116] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[    0.037117] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[    0.037117] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[    0.037118] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[    0.037118] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[    0.037118] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[    0.037120] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[    0.037121] Booting paravirtualized kernel on bare hardware
<6>[    0.037123] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[    0.037131] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[    0.037467] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[    0.037471] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[    0.037472] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
<5>[    0.037485] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[    0.037562] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[    0.037576] random: crng init done
<6>[    0.039391] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[    0.040291] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[    0.040346] Fallback order for Node 0: 0 
<6>[    0.040349] Built 1 zonelists, mobility grouping on.  Total pages: 8285792
<6>[    0.040350] Policy zone: Normal
<6>[    0.040359] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[    0.040360] stackdepot: allocating hash table via alloc_large_system_hash
<6>[    0.040361] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[    0.041285] software IO TLB: area num 8.
<4>[    0.086675] **********************************************************
<4>[    0.086677] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.086677] **                                                      **
<4>[    0.086678] ** This system shows unhashed kernel memory addresses   **
<4>[    0.086678] ** via the console, logs, and other interfaces. This    **
<4>[    0.086678] ** might reduce the security of your system.            **
<4>[    0.086678] **                                                      **
<4>[    0.086679] ** If you see this message and you are not debugging    **
<4>[    0.086679] ** the kernel, report this immediately to your system   **
<4>[    0.086679] ** administrator!                                       **
<4>[    0.086679] **                                                      **
<4>[    0.086679] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.086679] **********************************************************
<6>[    0.087751] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[    0.088074] ftrace: allocating 59524 entries in 233 pages
<6>[    0.113492] ftrace: allocated 233 pages with 5 groups
<6>[    0.114694] Dynamic Preempt: voluntary
<6>[    0.115144] Running RCU self tests
<6>[    0.115144] Running RCU synchronous self tests
<6>[    0.115145] rcu: Preemptible hierarchical RCU implementation.
<6>[    0.115145] rcu: 	RCU lockdep checking is enabled.
<6>[    0.115146] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[    0.115147] 	Trampoline variant of Tasks RCU enabled.
<6>[    0.115147] 	Rude variant of Tasks RCU enabled.
<6>[    0.115147] 	Tracing variant of Tasks RCU enabled.
<6>[    0.115148] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[    0.115148] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[    0.115190] Running RCU synchronous self tests
<6>[    0.115195] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115198] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115200] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.125243] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[    0.125694] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[    0.126037] Console: colour dummy device 80x25
<6>[    0.126046] printk: legacy console [tty0] enabled
<6>[    0.127281] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[    0.127289] ... MAX_LOCKDEP_SUBCLASSES:  8
<6>[    0.127293] ... MAX_LOCK_DEPTH:          48
<6>[    0.127296] ... MAX_LOCKDEP_KEYS:        8192
<6>[    0.127300] ... CLASSHASH_SIZE:          4096
<6>[    0.127304] ... MAX_LOCKDEP_ENTRIES:     524288
<6>[    0.127307] ... MAX_LOCKDEP_CHAINS:      524288
<6>[    0.127311] ... CHAINHASH_SIZE:          262144
<6>[    0.127314]  memory used by lock dependency info: 54145 kB
<6>[    0.127319]  memory used for stack traces: 4224 kB
<6>[    0.127323]  per task-struct memory footprint: 1920 bytes
<6>[    0.127373] ACPI: Core revision 20240827
<6>[    0.128267] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[    0.128331] APIC: Switch to symmetric I/O mode setup
<6>[    0.128337] DMAR: Host address width 38
<6>[    0.128340] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[    0.128372] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128404] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[    0.128424] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128450] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[    0.128471] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[    0.128505] DMAR: SATC flags: 0x1
<6>[    0.128515] DMAR-IR: IOAPIC id 2 under DRHD base  0xfc820000 IOMMU 2
<6>[    0.128520] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[    0.128524] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[    0.130581] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[    0.135669] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[    0.135687] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[    0.135758] CPU0: Thermal monitoring enabled (TM1)
<6>[    0.135764] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[    0.135941] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[    0.135946] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[    0.135957] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[    0.135966] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[    0.135971] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[    0.135978] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[    0.135986] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[    0.136002] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[    0.136009] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[    0.136015] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[    0.136020] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[    0.136026] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[    0.136033] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
<6>[    0.136038] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
<6>[    0.136044] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
<6>[    0.136049] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[    0.136681] Freeing SMP alternatives memory: 48K
<6>[    0.136681] pid_max: default: 32768 minimum: 301
<6>[    0.136681] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[    0.136681] landlock: Up and running.
<6>[    0.136681] Yama: becoming mindful.
<6>[    0.136681] AppArmor: AppArmor initialized
<6>[    0.136681] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136681] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136681] Running RCU synchronous self tests
<6>[    0.136681] Running RCU synchronous self tests
<6>[    0.136681] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[    0.136681] Running RCU Tasks wait API self tests
<6>[    0.136681] Running RCU Tasks Rude wait API self tests
<6>[    0.136681] Running RCU Tasks Trace wait API self tests
<6>[    0.136681] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[    0.136681] core: cpu_core PMU driver: 
<6>[    0.136681] ... version:                6
<6>[    0.136681] ... bit width:              48
<6>[    0.136681] ... generic registers:      10
<6>[    0.136681] ... value mask:             0000ffffffffffff
<6>[    0.136681] ... max period:             00007fffffffffff
<6>[    0.136686] ... fixed-purpose events:   4
<6>[    0.136689] ... event mask:             0001000f000003ff
<6>[    0.136720] signal: max sigframe size: 3632
<6>[    0.136741] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[    0.136822] rcu: Hierarchical SRCU implementation.
<6>[    0.136826] rcu: 	Max phase no-delay instances is 400.
<6>[    0.137750] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[    0.139566] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[    0.139863] smp: Bringing up secondary CPUs ...
<6>[    0.140213] smpboot: x86: Booting SMP configuration:
<6>[    0.140219] .... node  #0, CPUs:      #1 #2
<6>[    0.142842] Callback from call_rcu_tasks_trace() invoked.
<4>[    0.145773]  #3 #4 #5 #6 #7
<6>[    0.010804] core: cpu_atom PMU driver: 
<6>[    0.010804] ... version:                6
<6>[    0.010804] ... bit width:              48
<6>[    0.010804] ... generic registers:      8
<6>[    0.010804] ... value mask:             0000ffffffffffff
<6>[    0.010804] ... max period:             00007fffffffffff
<6>[    0.010804] ... fixed-purpose events:   6
<6>[    0.010804] ... event mask:             00000077000000ff
<6>[    0.153848] smp: Brought up 1 node, 8 CPUs
<6>[    0.153855] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[    0.155820] Memory: 32345020K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775236K reserved, 0K cma-reserved)
<6>[    0.156200] devtmpfs: initialized
<6>[    0.156907] x86/mm: Memory block size: 128MB
<6>[    0.172738] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[    0.173177] Running RCU synchronous self tests
<6>[    0.173191] Running RCU synchronous self tests
<6>[    0.173208] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.173208] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[    0.173777] pinctrl core: initialized pinctrl subsystem
<6>[    0.174270] PM: RTC time: 01:50:36, date: 2025-03-03
<6>[    0.175207] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[    0.176227] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[    0.176519] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[    0.176804] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[    0.176878] audit: initializing netlink subsys (disabled)
<5>[    0.176978] audit: type=2000 audit(1740966636.041:1): state=initialized audit_enabled=0 res=1
<6>[    0.177975] thermal_sys: Registered thermal governor 'fair_share'
<6>[    0.177976] thermal_sys: Registered thermal governor 'bang_bang'
<6>[    0.177982] thermal_sys: Registered thermal governor 'step_wise'
<6>[    0.177987] thermal_sys: Registered thermal governor 'user_space'
<6>[    0.177991] thermal_sys: Registered thermal governor 'power_allocator'
<6>[    0.178036] EISA bus registered
<6>[    0.178063] cpuidle: using governor ladder
<6>[    0.178063] cpuidle: using governor menu
<6>[    0.178063] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[    0.178854] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[    0.178883] PCI: Using configuration type 1 for base access
<6>[    0.179035] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[    0.179806] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[    0.179806] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[    0.179806] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[    0.179806] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[    0.198682] raid6: avx2x4   gen() 76420 MB/s
<6>[    0.215682] raid6: avx2x2   gen() 82826 MB/s
<6>[    0.232683] raid6: avx2x1   gen() 72386 MB/s
<6>[    0.232687] raid6: using algorithm avx2x2 gen() 82826 MB/s
<6>[    0.249682] raid6: .... xor() 57769 MB/s, rmw enabled
<6>[    0.249687] raid6: using avx2x2 recovery algorithm
<6>[    0.252546] fbcon: Taking over console
<6>[    0.252864] ACPI: Added _OSI(Module Device)
<6>[    0.252873] ACPI: Added _OSI(Processor Device)
<6>[    0.252880] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.252886] ACPI: Added _OSI(Processor Aggregator Device)
<6>[    0.816744] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[    0.830346] ACPI: EC: EC started
<6>[    0.830358] ACPI: EC: interrupt blocked
<6>[    0.833132] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[    0.833137] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[    0.897150] Callback from call_rcu_tasks() invoked.
<6>[    1.142455] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.142463] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.169976] ACPI: Interpreter enabled
<6>[    1.170065] ACPI: PM: (supports S0 S4 S5)
<6>[    1.170070] ACPI: Using IOAPIC for interrupt routing
<6>[    1.175196] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    1.175203] PCI: Ignoring E820 reservations for host bridge windows
<6>[    1.194286] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[    1.194335] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[    1.234825] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[    1.235106] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[    1.238155] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[    1.600437] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[    1.614054] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[    1.764245] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[    1.766040] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[    1.774091] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[    1.783411] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[    1.783658] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[    1.784274] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[    1.839546] ACPI: \: Can't tag data node
<3>[    1.841057] ACPI: \: Can't tag data node
<3>[    1.842195] ACPI: \: Can't tag data node
<3>[    1.843233] ACPI: \: Can't tag data node
<3>[    1.844690] ACPI: \: Can't tag data node
<6>[    2.052046] ACPI: \_TZ_.FN00: New power resource
<6>[    2.053360] ACPI: \_TZ_.FN01: New power resource
<6>[    2.054647] ACPI: \_TZ_.FN02: New power resource
<6>[    2.056038] ACPI: \_TZ_.FN03: New power resource
<6>[    2.057298] ACPI: \_TZ_.FN04: New power resource
<6>[    2.062215] ACPI: \PIN_: New power resource
<6>[    2.068860] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[    2.068892] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[    2.075756] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[    2.085999] PCI host bridge to bus 0000:00
<6>[    2.086030] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
<6>[    2.086038] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
<6>[    2.086044] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[    2.086052] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[    2.086059] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[    2.086067] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[    2.089225] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[    2.089795] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[    2.089889] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[    2.089899] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[    2.089909] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[    2.089955] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[    2.091191] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[    2.091221] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[    2.092376] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[    2.092406] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[    2.092413] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[    2.093511] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[    2.093558] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.093570] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[    2.093588] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[    2.093724] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[    2.093777] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[    2.098110] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[    2.098153] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.098165] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[    2.098183] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[    2.098307] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[    2.098355] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[    2.102537] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[    2.102587] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.102599] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[    2.102617] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[    2.102737] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[    2.102785] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[    2.110925] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[    2.111003] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[    2.111034] pci 0000:00:0a.0: enabling Extended Tags
<6>[    2.111494] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[    2.111561] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[    2.111581] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[    2.112666] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.112765] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[    2.112903] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[    2.117315] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.117416] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[    2.117435] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[    2.117554] pci 0000:00:0d.2: supports D1 D2
<6>[    2.117564] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.121140] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.121241] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[    2.121260] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[    2.121394] pci 0000:00:0d.3: supports D1 D2
<6>[    2.121406] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.125271] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[    2.125376] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[    2.125521] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[    2.132602] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.132808] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[    2.133115] pci 0000:00:13.0: PME# supported from D3hot
<6>[    2.134121] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.134222] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[    2.134349] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[    2.139480] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[    2.139591] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[    2.139611] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[    2.140203] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.140480] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.143516] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.143681] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.147383] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.147656] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.150829] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.151102] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.154331] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.154480] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[    2.154645] pci 0000:00:16.0: PME# supported from D3hot
<6>[    2.161408] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[    2.161521] pci 0000:00:16.3: BAR 0 [io  0x4020-0x4027]
<6>[    2.161535] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[    2.162128] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[    2.162194] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.162212] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[    2.162229] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[    2.162444] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[    2.162525] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[    2.174921] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[    2.175056] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    2.175110] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[    2.175543] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[    2.175751] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[    2.189409] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[    2.192851] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[    2.193084] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[    2.193119] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[    2.193691] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[    2.194649] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[    2.194822] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[    2.194850] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
<6>[    2.198281] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.198477] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[    2.198912] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[    2.199017] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[    2.199141] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[    2.202325] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[    2.202427] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[    2.202446] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[    2.202464] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[    2.203164] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.203523] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.203876] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.204267] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[    2.204381] pci 0000:7f:00.0: BAR 0 [io  0x3000-0x30ff]
<6>[    2.204402] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[    2.204422] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[    2.204888] pci 0000:7f:00.0: supports D1 D2
<6>[    2.204898] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.206059] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.208825] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.209693] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[    2.209693] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[    2.210858] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.210972] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    2.646433] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[   12.383003] Low-power S0 idle used by default for system suspend
<6>[   12.435357] ACPI: EC: interrupt unblocked
<6>[   12.435368] ACPI: EC: event unblocked
<6>[   12.435402] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[   12.435408] ACPI: EC: GPE=0x6e
<6>[   12.435414] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[   12.435422] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[   12.435879] iommu: Default domain type: Translated
<6>[   12.435879] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[   12.438274] SCSI subsystem initialized
<7>[   12.438702] libata version 3.00 loaded.
<6>[   12.438807] ACPI: bus type USB registered
<6>[   12.438876] usbcore: registered new interface driver usbfs
<6>[   12.438910] usbcore: registered new interface driver hub
<6>[   12.438952] usbcore: registered new device driver usb
<6>[   12.439071] pps_core: LinuxPPS API ver. 1 registered
<6>[   12.439076] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[   12.439096] PTP clock support registered
<6>[   12.439887] EDAC MC: Ver: 3.0.0
<6>[   12.443697] efivars: Registered efivars operations
<6>[   12.448216] NetLabel: Initializing
<6>[   12.448227] NetLabel:  domain hash size = 128
<6>[   12.448238] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
<6>[   12.448410] NetLabel:  unlabeled traffic allowed by default
<6>[   12.448452] mctp: management component transport protocol core
<6>[   12.448465] NET: Registered PF_MCTP protocol family
<6>[   12.448549] PCI: Using ACPI for IRQ routing
<7>[   12.491125] PCI: pci_cache_line_size set to 64 bytes
<6>[   12.491442] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[   12.491634] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[   12.491654] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[   12.491661] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[   12.491667] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[   12.491674] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[   12.492740] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[   12.492762] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[   12.492773] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[   12.492803] vgaarb: loaded
<6>[   12.493794] clocksource: Switched to clocksource tsc-early
<5>[   12.496241] VFS: Disk quotas dquot_6.6.0
<6>[   12.496291] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[   12.498080] AppArmor: AppArmor Filesystem Enabled
<6>[   12.498398] pnp: PnP ACPI init
<6>[   12.500171] system 00:00: [io  0x0680-0x069f] has been reserved
<6>[   12.500194] system 00:00: [io  0x164e-0x164f] has been reserved
<6>[   12.503114] system 00:02: [io  0x06a4] has been reserved
<6>[   12.503134] system 00:02: [io  0x06a0] has been reserved
<6>[   12.557683] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[   12.557726] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[   12.557757] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[   12.557780] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[   12.557799] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[   12.557844] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[   12.557868] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[   12.557888] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[   12.563620] system 00:04: [io  0x2000-0x20fe] has been reserved
<6>[   12.567694] system 00:06: [io  0x1854-0x1857] has been reserved
<6>[   12.568052] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[   12.576129] pnp: PnP ACPI: found 8 devices
<6>[   12.590724] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[   12.591986] NET: Registered PF_INET protocol family
<6>[   12.592299] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   12.595479] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[   12.595814] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[   12.596150] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   12.597386] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[   12.599559] TCP: Hash tables configured (established 262144 bind 65536)
<6>[   12.600229] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   12.601966] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   12.603614] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[   12.603731] pci 0000:00:07.0: bridge window [io  0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[   12.603750] pci 0000:00:07.1: bridge window [io  0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[   12.603763] pci 0000:00:07.2: bridge window [io  0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[   12.603851] pci 0000:00:07.0: bridge window [io  0x5000-0x5fff]: assigned
<6>[   12.603861] pci 0000:00:07.1: bridge window [io  0x6000-0x6fff]: assigned
<6>[   12.603871] pci 0000:00:07.2: bridge window [io  0x7000-0x7fff]: assigned
<6>[   12.603882] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[   12.603939] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[   12.603993] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[   12.604047] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[   12.604099] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[   12.604145] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[   12.604159] pci 0000:00:07.0:   bridge window [io  0x5000-0x5fff]
<6>[   12.604171] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[   12.604182] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   12.604198] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[   12.604208] pci 0000:00:07.1:   bridge window [io  0x6000-0x6fff]
<6>[   12.604220] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[   12.604231] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   12.604246] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[   12.604255] pci 0000:00:07.2:   bridge window [io  0x7000-0x7fff]
<6>[   12.604266] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[   12.604277] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   12.604294] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[   12.604301] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[   12.604312] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[   12.604327] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[   12.604364] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[   12.604409] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
<6>[   12.604417] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
<6>[   12.604425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[   12.604434] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[   12.604443] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[   12.604452] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
<6>[   12.604460] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[   12.604468] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   12.604478] pci_bus 0000:2b: resource 0 [io  0x6000-0x6fff]
<6>[   12.604485] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[   12.604493] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   12.604503] pci_bus 0000:55: resource 0 [io  0x7000-0x7fff]
<6>[   12.604511] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[   12.604519] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   12.604529] pci_bus 0000:7f: resource 0 [io  0x3000-0x3fff]
<6>[   12.604536] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[   12.604545] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[   12.606041] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[   12.608312] PCI: CLS 0 bytes, default 64
<6>[   12.608448] DMAR: No RMRR found
<6>[   12.608465] DMAR: No ATSR found
<6>[   12.608471] DMAR: dmar1: Using Queued invalidation
<6>[   12.608498] DMAR: dmar0: Using Queued invalidation
<6>[   12.608510] DMAR: dmar2: Using Queued invalidation
<6>[   12.609638] pci 0000:00:04.0: Adding to iommu group 0
<6>[   12.609736] pci 0000:00:05.0: Adding to iommu group 1
<6>[   12.609852] pci 0000:00:0a.0: Adding to iommu group 2
<6>[   12.609929] pci 0000:00:0b.0: Adding to iommu group 3
<6>[   12.614329] pci 0000:00:02.0: Adding to iommu group 4
<6>[   12.617250] pci 0000:00:00.0: Adding to iommu group 5
<6>[   12.617994] pci 0000:00:07.0: Adding to iommu group 6
<6>[   12.618658] pci 0000:00:07.1: Adding to iommu group 7
<6>[   12.619316] pci 0000:00:07.2: Adding to iommu group 8
<6>[   12.620284] pci 0000:00:0d.0: Adding to iommu group 9
<6>[   12.620679] pci 0000:00:0d.2: Adding to iommu group 9
<6>[   12.620736] pci 0000:00:0d.3: Adding to iommu group 9
<6>[   12.620822] pci 0000:00:12.0: Adding to iommu group 10
<6>[   12.620913] pci 0000:00:13.0: Adding to iommu group 11
<6>[   12.621015] pci 0000:00:14.0: Adding to iommu group 12
<6>[   12.621072] pci 0000:00:14.2: Adding to iommu group 12
<6>[   12.621193] pci 0000:00:15.0: Adding to iommu group 13
<6>[   12.621251] pci 0000:00:15.1: Adding to iommu group 13
<6>[   12.621312] pci 0000:00:15.2: Adding to iommu group 13
<6>[   12.621372] pci 0000:00:15.3: Adding to iommu group 13
<6>[   12.621470] pci 0000:00:16.0: Adding to iommu group 14
<6>[   12.621531] pci 0000:00:16.3: Adding to iommu group 14
<6>[   12.621608] pci 0000:00:1c.0: Adding to iommu group 15
<6>[   12.621709] pci 0000:00:1c.4: Adding to iommu group 16
<6>[   12.621865] pci 0000:00:1f.0: Adding to iommu group 17
<6>[   12.621927] pci 0000:00:1f.3: Adding to iommu group 17
<6>[   12.621985] pci 0000:00:1f.4: Adding to iommu group 17
<6>[   12.622047] pci 0000:00:1f.5: Adding to iommu group 17
<6>[   12.622107] pci 0000:00:1f.6: Adding to iommu group 17
<6>[   12.622166] pci 0000:00:1f.7: Adding to iommu group 17
<6>[   12.622252] pci 0000:7f:00.0: Adding to iommu group 18
<6>[   12.622356] pci 0000:80:00.0: Adding to iommu group 19
<6>[   12.636436] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[   12.636456] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[   12.636465] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[   12.642216] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[   12.642456] clocksource: Switched to clocksource tsc
<6>[   12.642800] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[   12.648014] Initialise system trusted keyrings
<5>[   12.648125] Key type blacklist registered
<6>[   12.648574] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[   12.659182] zbud: loaded
<6>[   12.660672] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[   12.660825] ntfs3: Enabled Linux POSIX ACLs support
<6>[   12.660833] ntfs3: Read-only LZX/Xpress compression included
<5>[   12.661343] integrity: Platform Keyring initialized
<5>[   12.661372] integrity: Machine keyring initialized
<6>[   12.667637] xor: automatically using best checksumming function   avx       
<5>[   12.667649] Key type asymmetric registered
<5>[   12.667664] Asymmetric key parser 'x509' registered
<6>[   12.667814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[   12.668338] io scheduler mq-deadline registered
<6>[   12.669440] ledtrig-cpu: registered to indicate activity on CPUs
<6>[   12.671223] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[   12.671770] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[   12.673041] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[   12.673558] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[   12.674799] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[   12.675282] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[   12.676403] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[   12.676908] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[   12.678434] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[   12.679013] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[   12.679643] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[   12.682695] Monitor-Mwait will be used to enter C-1 state
<7>[   12.682846] Monitor-Mwait will be used to enter C-2 state
<7>[   12.682907] Monitor-Mwait will be used to enter C-3 state
<6>[   12.689678] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[   12.690111] ACPI: button: Lid Switch [LID0]
<6>[   12.690374] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[   12.690542] ACPI: button: Sleep Button [SLPB]
<6>[   12.690739] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[   12.691163] ACPI: button: Power Button [PWRB]
<4>[   12.707160] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   12.714146] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   12.722506] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   12.730650] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   12.739346] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   12.747031] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   12.755088] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   12.762296] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[   12.847405] thermal LNXTHERM:00: registered as thermal_zone0
<6>[   12.847427] ACPI: thermal: Thermal Zone [TZ00] (51 C)
<6>[   12.849387] ACPI: battery: Slot [BAT1] (battery absent)
<6>[   12.849932] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[   12.851660] ACPI: battery: Slot [BAT0] (battery present)
<6>[   12.875111] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[   12.905814] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[   12.908685] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[   12.933668] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[   12.937374] hpet_acpi_add: no address or irqs in _CRS
<6>[   12.937585] Linux agpgart interface v0.103
<6>[   12.938967] ACPI: bus type drm_connector registered
<6>[   12.975973] loop: module loaded
<6>[   13.048876] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[   13.266839] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[   13.456041] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[   13.606132] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[   13.781316] Key type psk registered
<6>[   13.786662] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[   13.788077] nvme nvme0: pci function 0000:80:00.0
<6>[   13.788197] tun: Universal TUN/TAP device driver, 1.6
<6>[   13.790180] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   13.790395] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[   13.793839] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   13.797175] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   13.797217] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[   13.797250] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   13.797933] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   13.797969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.797987] usb usb1: Product: xHCI Host Controller
<6>[   13.798000] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   13.798014] usb usb1: SerialNumber: 0000:00:0d.0
<6>[   13.800651] hub 1-0:1.0: USB hub found
<6>[   13.800794] hub 1-0:1.0: 1 port detected
<6>[   13.807677] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   13.807701] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.807719] usb usb2: Product: xHCI Host Controller
<6>[   13.807731] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   13.807745] usb usb2: SerialNumber: 0000:00:0d.0
<6>[   13.810553] hub 2-0:1.0: USB hub found
<6>[   13.810631] hub 2-0:1.0: 3 ports detected
<6>[   13.833226] nvme nvme0: 8/0/0 default/read/poll queues
<6>[   13.846799]  nvme0n1: p1 p2
<6>[   13.858634] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   13.858655] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[   13.860169] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   13.861358] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   13.861375] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[   13.861388] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   13.861647] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   13.861656] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.861664] usb usb3: Product: xHCI Host Controller
<6>[   13.861669] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   13.861675] usb usb3: SerialNumber: 0000:00:14.0
<6>[   13.862724] hub 3-0:1.0: USB hub found
<6>[   13.862767] hub 3-0:1.0: 8 ports detected
<6>[   13.881497] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   13.881507] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.881513] usb usb4: Product: xHCI Host Controller
<6>[   13.881517] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   13.881522] usb usb4: SerialNumber: 0000:00:14.0
<6>[   13.882546] hub 4-0:1.0: USB hub found
<6>[   13.882576] hub 4-0:1.0: 2 ports detected
<6>[   13.887140] usbcore: registered new interface driver usb-storage
<6>[   13.887226] usbcore: registered new interface driver usbserial_generic
<6>[   13.887281] usbserial: USB Serial support registered for generic
<6>[   13.887313] usbcore: registered new interface driver ftdi_sio
<6>[   13.887334] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[   13.887368] usbcore: registered new interface driver pl2303
<6>[   13.887388] usbserial: USB Serial support registered for pl2303
<6>[   13.887465] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[   13.887471] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[   14.599622] i8042: Can't read CTR while initializing i8042
<3>[   14.599627] i8042 i8042: probe with driver i8042 failed with error -5
<6>[   14.601759] mousedev: PS/2 mouse device common for all mice
<6>[   14.602996] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[   14.605695] rtc_cmos rtc_cmos: registered as rtc0
<6>[   14.605968] rtc_cmos rtc_cmos: setting system clock to 2025-03-03T01:50:50 UTC (1740966650)
<6>[   14.606365] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[   14.606450] i2c_dev: i2c /dev entries driver
<6>[   14.616169] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[   14.616190] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[   14.616201] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[   14.616246] device-mapper: uevent: version 1.0.3
<6>[   14.616616] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[   14.616767] platform eisa.0: Probing EISA bus 0
<4>[   14.616782] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[   14.616796] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[   14.616815] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[   14.616827] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[   14.616839] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[   14.616853] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[   14.616866] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[   14.616879] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[   14.616893] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[   14.616903] platform eisa.0: EISA: Detected 0 cards
<6>[   14.616913] intel_pstate: Intel P-state driver initializing
<6>[   14.620435] Hybrid CPU capacity scaling enabled
<6>[   14.621764] intel_pstate: HWP enabled
<6>[   14.621772] sdhci: Secure Digital Host Controller Interface driver
<6>[   14.621781] sdhci: Copyright(c) Pierre Ossman
<6>[   14.621930] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[   14.624974] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[   14.626167] drop_monitor: Initializing network drop monitor service
<6>[   14.626456] NET: Registered PF_INET6 protocol family
<6>[   14.630103] Segment Routing with IPv6
<6>[   14.630160] In-situ OAM (IOAM) with IPv6
<6>[   14.630210] NET: Registered PF_PACKET protocol family
<5>[   14.630333] Key type dns_resolver registered
<4>[   14.633529] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[   14.634567] microcode: Current revision: 0x0000011b
<6>[   14.635052] IPI shorthand broadcast: enabled
<6>[   14.644670] sched_clock: Marking stable (14634001492, 9804342)->(14710327336, -66521502)
<6>[   14.645417] registered taskstats version 1
<5>[   14.646761] Loading compiled-in X.509 certificates
<6>[   14.674539] Demotion targets for Node 0: null
<6>[   14.674718] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[   14.674721] kmemleak: Automatic memory scanning thread started
<5>[   14.675173] Key type .fscrypt registered
<5>[   14.675178] Key type fscrypt-provisioning registered
<6>[   14.677680] Btrfs loaded, zoned=yes, fsverity=yes
<5>[   14.679985] Key type encrypted registered
<6>[   14.679993] AppArmor: AppArmor sha256 policy hashing enabled
<6>[   14.680183] ima: No TPM chip found, activating TPM-bypass!
<5>[   14.680197] Loading compiled-in module X.509 certificates
<5>[   14.680921] Loaded X.509 cert 'Build time autogenerated kernel key: caea5309b094d0ff9e30c226151064c934b1b39e'
<6>[   14.680932] ima: Allocated hash algorithm: sha256
<6>[   14.680971] ima: No architecture policies found
<6>[   14.681061] evm: Initialising EVM extended attributes:
<6>[   14.681065] evm: security.selinux
<6>[   14.681068] evm: security.SMACK64
<6>[   14.681071] evm: security.SMACK64EXEC
<6>[   14.681074] evm: security.SMACK64TRANSMUTE
<6>[   14.681077] evm: security.SMACK64MMAP
<6>[   14.681080] evm: security.apparmor
<6>[   14.681083] evm: security.ima
<6>[   14.681085] evm: security.capability
<6>[   14.681088] evm: HMAC attrs: 0x1
<6>[   14.682967] PM:   Magic number: 1:97:811
<6>[   14.683070] acpi PNP0A05:03: hash matches
<6>[   14.683197] printk: legacy console [netcon0] enabled
<6>[   14.683203] netconsole: network logging started
<6>[   14.683787] RAS: Correctable Errors collector initialized.
<6>[   14.683968] clk: Disabling unused clocks
<6>[   14.683978] PM: genpd: Disabling unused power domains
<6>[   14.684598] md: Waiting for all devices to be available before autodetect
<6>[   14.684607] md: If you don't use raid, use raid=noautodetect
<6>[   14.684615] md: Autodetecting RAID arrays.
<6>[   14.684624] md: autorun ...
<6>[   14.684627] md: ... autorun DONE.
<6>[   14.726702] EXT4-fs (nvme0n1p2): mounted filesystem ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 ro with ordered data mode. Quota mode: none.
<6>[   14.726769] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[   14.727325] devtmpfs: mounted
<6>[   14.738252] Freeing unused decrypted memory: 2028K
<6>[   14.739159] Freeing unused kernel image (initmem) memory: 5632K
<6>[   14.739183] Write protecting the kernel read-only data: 34816k
<6>[   14.739623] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[   14.739997] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[   14.744406] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[   14.745019] Run /sbin/init as init process
<7>[   14.745023]   with arguments:
<7>[   14.745024]     /sbin/init
<7>[   14.745025]   with environment:
<7>[   14.745026]     HOME=/
<7>[   14.745027]     TERM=linux
<7>[   14.745027]     BOOT_IMAGE=/boot/drm_intel
<7>[   14.791250] systemd[1]: Inserted module 'autofs4'
<7>[   14.809380] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[   14.809423] systemd[1]: Detected architecture x86-64.
<7>[   14.810503] systemd[1]: Hostname set to <shard-lnl-1>.
<7>[   15.060359] systemd[1]: Queued start job for default target graphical.target.
<7>[   15.102180] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[   15.106490] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[   15.109394] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[   15.109839] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[   15.110925] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[   15.111102] systemd[1]: Expecting device dev-disk-by\x2duuid-47B0\x2dB6FF.device - /dev/disk/by-uuid/47B0-B6FF...
<7>[   15.111234] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[   15.111376] systemd[1]: Reached target slices.target - Slice Units.
<7>[   15.111491] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[   15.111595] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[   15.111701] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[   15.112064] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[   15.112714] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[   15.113080] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[   15.113466] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[   15.113751] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[   15.113976] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[   15.114369] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[   15.114695] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[   15.114988] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[   15.115175] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.115445] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[   15.115690] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[   15.118908] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[   15.121376] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[   15.124004] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[   15.126753] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[   15.132565] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[   15.135837] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[   15.138953] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[   15.142522] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[   15.145214] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[   15.148089] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[   15.152039] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[   15.155905] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[   15.159459] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[   15.163027] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[   15.168471] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[   15.168816] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[   15.170059] systemd-journald[209]: Collecting audit messages is disabled.
<7>[   15.172797] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[   15.173828] pstore: Using crash dump compression: deflate
<7>[   15.180686] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[   15.180893] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.180966] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[   15.183485] pstore: Registered efi_pstore as persistent store backend
<7>[   15.186467] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[   15.189416] fuse: init (API version 7.42)
<7>[   15.193380] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[   15.343119] EXT4-fs (nvme0n1p2): re-mounted ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 r/w. Quota mode: none.
<6>[   15.373221] Adding 8388604k swap on /swap.img.  Priority:-2 extents:52 across:429129728k SS
<7>[   15.387343] systemd-journald[209]: Received client request to flush runtime journal.
<7>[   15.400648] systemd-journald[209]: /var/log/journal/834d840f209d4e2294628ae19454e8da/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[   15.400660] systemd-journald[209]: Rotating system journal.
<4>[   16.073901] nvme nvme0: using unchecked data buffer
<4>[   16.212111] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212135] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212160] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212185] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212209] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212234] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.212253] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[   16.212258] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212283] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212308] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212332] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212357] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212382] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212406] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212431] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212455] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212480] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212504] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212541] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212565] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212590] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212614] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212639] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212664] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212688] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212713] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212749] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212773] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212871] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212895] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212920] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212944] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212969] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.213017] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.213041] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.213065] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.213090] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.213115] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.213139] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239533] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239558] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239583] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239607] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239632] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239656] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239693] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239717] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239862] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239901] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239925] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.239956] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240023] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240047] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240072] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240100] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240124] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240145] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240169] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240194] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240218] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240243] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240268] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240292] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240317] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240341] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240366] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240391] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240415] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.240440] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.279957] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<4>[   16.284115] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284134] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284154] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284174] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284194] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284213] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284233] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284291] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284304] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284316] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284329] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284341] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284354] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284366] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284379] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284391] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284404] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284416] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284437] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284457] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284469] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284482] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284534] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284547] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284559] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284585] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284598] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284610] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284623] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284637] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284650] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284662] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284675] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284687] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284700] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284712] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284725] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284737] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.284750] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.296454] pci 0000:00:05.0: Setting to D3hot
<6>[   16.301301] intel-hid INTC107B:00: platform supports 5 button array
<6>[   16.307851] pci 0000:00:0b.0: Setting to D3hot
<4>[   16.311704] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.311730] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.313192] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[   16.320092] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[   16.320287] intel_pmc_core INT33A1:00:  initialized
<4>[   16.366803] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.366836] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.366856] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.366876] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.366896] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.366916] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.366936] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.366955] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.366975] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367019] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367039] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367084] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367104] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367138] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367158] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367178] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367198] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367244] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367276] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367296] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367316] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367347] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367368] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367388] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367407] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367453] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367499] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367520] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367539] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367573] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367593] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367613] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367633] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367653] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367673] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367693] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367713] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367733] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367753] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367765] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367778] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367790] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367803] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367868] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.367885] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[   16.421540] audit: type=1400 audit(1740966652.313:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=425 comm="apparmor_parser"
<5>[   16.427624] audit: type=1400 audit(1740966652.319:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=424 comm="apparmor_parser"
<5>[   16.428654] audit: type=1400 audit(1740966652.320:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=423 comm="apparmor_parser"
<5>[   16.428991] audit: type=1400 audit(1740966652.321:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=426 comm="apparmor_parser"
<5>[   16.430195] audit: type=1400 audit(1740966652.322:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=429 comm="apparmor_parser"
<5>[   16.431549] audit: type=1400 audit(1740966652.323:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=431 comm="apparmor_parser"
<5>[   16.431995] audit: type=1400 audit(1740966652.324:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=430 comm="apparmor_parser"
<5>[   16.433691] audit: type=1400 audit(1740966652.325:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=427 comm="apparmor_parser"
<5>[   16.436727] audit: type=1400 audit(1740966652.328:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=434 comm="apparmor_parser"
<5>[   16.441395] audit: type=1400 audit(1740966652.333:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=435 comm="apparmor_parser"
<3>[   16.449415] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[   16.471704] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[   16.779618] ACPI: bus type thunderbolt registered
<6>[   16.780913] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[   16.801434] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[   16.801440] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[   16.812527] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[   16.815004] e1000e: Intel(R) PRO/1000 Network Driver
<6>[   16.815011] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[   16.815150] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[   16.816413] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[   16.817711] intel_rapl_common: Found RAPL domain package
<6>[   16.817720] intel_rapl_common: Found RAPL domain dram
<6>[   16.856259] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[   16.860072] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[   16.860241] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[   16.898581] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[   16.933334] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[   16.955125] idma64 idma64.3: Found Intel integrated DMA 64-bit
<4>[   17.035408] block nvme0n1: No UUID available providing old NGUID
<6>[   17.069987] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[   17.069992] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[   17.069994] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[   17.069995] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[   17.069996] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[   17.069997] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[   17.070765] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[   17.096128] cryptd: max_cpu_qlen set to 1000
<6>[   17.110606] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 9c:a2:f4:61:fe:e9, XID 541, IRQ 196
<6>[   17.110617] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[   17.118383] AES CTR mode by8 optimization enabled
<6>[   17.198999] evm: overlay not supported
<6>[   17.305407] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[   17.506634] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:30:89
<6>[   17.506640] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[   17.510089] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[   17.595855] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[   17.625553] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[   17.625575] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[   17.625577] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[   17.758121] intel_rapl_common: Found RAPL domain package
<6>[   17.758127] intel_rapl_common: Found RAPL domain core
<6>[   17.758129] intel_rapl_common: Found RAPL domain uncore
<6>[   17.758131] intel_rapl_common: Found RAPL domain dram
<6>[   17.758133] intel_rapl_common: Found RAPL domain psys
<6>[   17.944044] loop0: detected capacity change from 0 to 8
<6>[   17.973465] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[   18.002304] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[   18.047873] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[   18.047890] 0x000000000000-0x000002000000 : "BIOS"
<6>[   18.133304] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[   18.247925] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[   18.333885] Consider using thermal netlink events interface
<6>[   18.387704] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[   18.634361] hid: raw HID events driver (C) Jiri Kosina
<6>[   18.641253] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[   18.684998] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.687042] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.689832] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.690957] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.693270] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.694593] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.699779] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.704304] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.709092] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.712596] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.716211] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.718648] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.269470] typec port0: bound usb3-port1 (ops connector_ops)
<6>[   19.269497] typec port0: bound usb2-port1 (ops connector_ops)
<6>[   20.187509] typec port1: bound usb3-port2 (ops connector_ops)
<6>[   20.187536] typec port1: bound usb2-port2 (ops connector_ops)
<6>[   23.898719] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[   29.673800] systemd-journald[209]: /var/log/journal/834d840f209d4e2294628ae19454e8da/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[   51.579383] [IGT] xe_module_load: executing
<7>[   51.589951] [IGT] xe_module_load: starting subtest load
<5>[   51.773706] Setting dangerous option force_probe - tainting kernel
<6>[   51.776605] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[   51.778364] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[   51.778375] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE  64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[   51.778479] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[   51.778558] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[   51.781914] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[   51.785739] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[   51.785837] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[   51.785923] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[   51.786003] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   51.786080] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[   51.786154] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   51.786216] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   51.786276] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   51.786334] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   51.786390] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   51.786446] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   51.786502] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   51.786559] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   51.786616] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   51.786673] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   51.786772] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[   51.787963] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   51.788051] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   51.792872] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[   51.792983] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[   51.795740] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   51.796765] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   51.796929] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[   51.797103] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000ef
<7>[   51.797229] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,000000ef
<7>[   51.797353] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     000000ff
<7>[   51.797478] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   51.797603] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,000000ff
<6>[   51.798533] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[   51.803304] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[   51.803525] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   51.803713] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[   51.803920] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   51.804087] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[   51.804246] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   51.804401] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   51.804578] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   51.804751] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   51.804922] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   51.805065] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   51.805204] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   51.805342] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   51.805479] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[   51.807824] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[   51.812728] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[   51.814098] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[   51.814312] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   51.814634] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[   51.816753] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   51.816989] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   51.837142] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   51.837590] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   51.837790] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[   51.838038] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[   51.838231] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,00000000
<7>[   51.838409] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     00000000
<7>[   51.838581] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   51.838741] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,0000000f
<7>[   51.839518] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[   51.839896] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[   51.840196] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[   51.840507] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[   51.840801] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[   51.841080] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[   51.841370] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[   51.841605] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[   51.841905] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[   51.842139] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[   51.842418] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[   51.842680] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[   51.842978] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[   51.843251] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[   51.843515] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[   51.843774] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[   51.844055] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[   51.844335] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[   51.844572] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.844818] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.845067] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[   51.845292] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.845517] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.845750] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.846000] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[   51.846268] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.846481] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.846689] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.846917] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[   51.847149] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.847364] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.847544] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.847720] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[   51.847915] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.848083] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.848257] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.848429] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[   51.848595] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.848752] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.848923] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.849077] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[   51.849784] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[   51.850052] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE      ", BDB version 260
<7>[   51.850255] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[   51.850442] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[   51.850645] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[   51.850844] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[   51.851016] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[   51.851178] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[   51.851361] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[   51.851564] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[   51.851764] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[   51.851962] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[   51.852129] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[   51.852294] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[   51.852459] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[   51.852614] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[   51.852784] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[   51.853048] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[   51.853241] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[   51.853440] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   51.853667] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   51.853867] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   51.854051] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[   51.854227] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[   51.854402] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   51.854576] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   51.854769] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   51.854975] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[   51.855260] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   51.855605] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[   51.855934] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   51.856265] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[   51.856583] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[   51.856912] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[   51.857200] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   51.857448] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   51.857733] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[   51.858010] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[   51.858063] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[   51.858373] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[   51.858615] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[   51.858864] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[   51.859465] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[   51.859799] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[   51.862371] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[   51.862666] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[   51.862911] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[   51.863122] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[   51.863155] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[   51.863315] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[   51.863405] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x8f074 = 0x86fc0
<7>[   51.863500] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[   51.863623] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[   51.863673] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[   51.863836] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[   51.863849] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[   51.864026] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[   51.864203] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[   51.864404] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[   51.864567] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f074 = 0x97fc0
<7>[   51.864725] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   51.864891] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[   51.865039] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   51.865177] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[   51.865312] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   51.865442] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[   51.865575] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[   51.865701] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f474 = 0x9ffc0
<7>[   51.865829] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   51.865950] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[   51.866064] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   51.866177] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[   51.866288] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   51.866396] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[   51.866508] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[   51.866616] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f874 = 0x547c0
<7>[   51.866730] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   51.866847] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[   51.866955] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   51.867062] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[   51.867164] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   51.867261] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[   51.870271] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[   51.874279] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   51.874413] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[   51.874533] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[   51.874741] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[   51.875130] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[   51.875516] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[   51.875774] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[   51.876052] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[   51.876306] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[   51.876565] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[   51.876801] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[   51.877070] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[   51.877302] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[   51.877531] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[   51.877826] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[   51.878164] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<6>[   51.878296] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[   51.878420] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   51.878656] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   51.878921] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   51.879144] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   51.879393] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   51.879919] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   51.881384] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   51.881686] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[   51.884267] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   51.884966] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID  HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[   51.885949] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[   51.887652] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[   51.888702] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[   51.891448] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   51.903199] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   51.903219] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.903222] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.903225] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   51.903230] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.903233] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   51.903242] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.903244] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   51.903249] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.903312] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.903314] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.903316] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.903329] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   51.904024] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[   51.904553] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[   51.904661] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[   51.904786] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[   51.905076] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[   51.905415] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   51.905697] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   51.905841] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   51.905928] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   51.906012] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   51.906127] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   51.906318] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[   51.906494] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   51.906614] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[   51.906922] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[   51.907045] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   51.907155] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[   51.907367] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[   51.907488] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   51.907600] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[   51.908043] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[   51.908177] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[   51.908309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[   51.908406] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[   51.908506] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[   51.908606] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[   51.908702] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[   51.908798] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[   51.908911] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[   51.909007] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[   51.909102] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[   51.909198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[   51.909293] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[   51.909387] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[   51.909483] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[   51.909579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[   51.909673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[   51.909768] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[   51.909874] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[   51.909968] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[   51.910061] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[   51.910888] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[   51.911016] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[   51.911119] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[   51.911215] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[   51.911304] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[   51.911387] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[   51.911466] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[   51.911547] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[   51.911633] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[   51.911713] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[   51.911786] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[   51.911871] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[   51.911955] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[   51.912045] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[   51.912124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[   51.912191] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[   51.912258] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[   51.912350] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[   51.912436] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[   51.912520] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[   51.912601] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[   51.912751] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[   51.912849] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[   51.912933] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[   51.913012] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[   51.913089] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[   51.913156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[   51.913217] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[   51.913306] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[   51.913373] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[   51.913437] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[   51.913500] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[   51.913567] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[   51.913633] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[   51.913698] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[   51.913793] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[   51.913878] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[   51.913956] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[   51.914031] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[   51.914106] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[   51.914168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[   51.914229] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[   51.914356] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[   51.914454] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[   51.914645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[   51.914752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   51.914887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[   51.914992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   51.915094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   51.915179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   51.915262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   51.915341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[   51.915421] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   51.915500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   51.915578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   51.915655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[   51.915732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   51.915815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[   51.915905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   51.915996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[   51.916086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[   51.916165] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[   51.916242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   51.916322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   51.916400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   51.916472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   51.916547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   51.916620] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   51.916691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   51.916760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   51.916851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   51.916932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   51.917012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[   51.917091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[   51.917163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   51.917231] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   51.917308] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.917384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.917460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.917537] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   51.917607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   51.917672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.917736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.917804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.917896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   51.917975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[   51.918055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[   51.918281] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[   51.918358] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   51.918441] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   51.918701] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[   51.918790] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[   51.943073] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[   52.006924] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[   52.167313] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[   52.167317] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[   52.167318] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[   52.167442] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[   52.167548] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   52.167635] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   52.167717] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   52.167824] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[   52.167910] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[   52.168008] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[   52.168076] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   52.168144] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   52.168202] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   52.168939] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[   52.169004] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[   52.169069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[   52.169130] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[   52.169190] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[   52.169252] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[   52.169313] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[   52.169376] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[   52.169439] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[   52.169500] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[   52.169562] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[   52.169622] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[   52.169681] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[   52.169739] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[   52.169795] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[   52.169862] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[   52.169918] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[   52.169974] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[   52.170031] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[   52.170090] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[   52.170150] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[   52.170210] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[   52.170265] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[   52.170319] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[   52.170371] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[   52.170423] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[   52.170482] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[   52.170541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[   52.170600] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[   52.170655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[   52.170710] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[   52.170768] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[   52.170830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[   52.170890] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[   52.170952] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[   52.171014] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[   52.171079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[   52.171141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[   52.171376] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[   52.171435] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[   52.171491] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[   52.171665] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[   52.171715] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[   52.171763] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[   52.172105] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[   52.172163] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[   52.172212] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[   52.172260] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[   52.172307] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[   52.172355] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[   52.172684] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[   52.172752] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[   52.172818] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[   52.172877] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   52.172940] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[   52.173001] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   52.173061] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   52.173120] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   52.173176] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   52.173230] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   52.173281] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   52.173332] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   52.173382] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   52.173431] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   52.173501] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[   52.173634] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[   52.176711] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[   52.189927] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[   52.190721] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   52.190803] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   52.195859] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[   52.198638] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   52.199037] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   52.199831] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[   52.199914] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[   52.199992] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[   52.200064] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[   52.200134] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[   52.200191] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[   52.200247] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[   52.200302] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[   52.200360] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[   52.204182] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[   52.204267] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[   52.204342] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[   52.207173] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[   52.211164] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[   52.211167] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[   52.211168] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[   52.211168] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[   52.211169] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[   52.211170] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[   52.211171] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[   52.211171] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[   52.211172] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[   52.211173] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[   52.211196] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[   52.211312] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[   52.211408] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[   52.211997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[   52.212098] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[   52.212193] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[   52.212284] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[   52.212360] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[   52.212436] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[   52.212503] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[   52.212571] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[   52.212634] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[   52.212700] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[   52.212772] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[   52.212861] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[   52.212949] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[   52.213035] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[   52.213119] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[   52.213190] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[   52.213253] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[   52.213314] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[   52.213372] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[   52.213430] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[   52.213487] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[   52.213542] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[   52.213597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[   52.213651] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[   52.213704] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[   52.213757] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[   52.213816] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[   52.213881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[   52.213948] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[   52.214030] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[   52.214750] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[   52.214883] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[   52.215319] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[   52.215400] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[   52.215987] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[   52.216076] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   52.216150] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[   52.216217] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   52.216279] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[   52.216334] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   52.216388] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   52.216439] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   52.216490] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   52.216539] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   52.216587] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   52.216634] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   52.216681] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   52.216727] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[   52.216788] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[   52.216885] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[   52.234804] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[   52.235829] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   52.236086] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   52.256135] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   52.256584] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   52.258615] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   52.261023] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   52.264240] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   52.306855] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[   52.309063] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[   52.309679] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[   52.310221] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb (   0 - 2048) -> (   0 -    0), size 2048 ->    0
<7>[   52.310520] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb (   0 -    0) -> (4054 - 4096), size    0 ->   42
<7>[   52.310794] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   52.311155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   52.311527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.311836] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.312128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   52.313566] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[   52.314500] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[   52.314779] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[   52.331768] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[   52.341576] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[   52.346774] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[   52.347698] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[   52.350627] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[   52.350752] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[   52.351481] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[   52.352688] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[   52.352754] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[   52.353319] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[   52.354052] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[   52.354100] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[   52.354586] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[   52.355572] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[   52.355608] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[   52.355656] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[   52.363553] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
<6>[   52.366028] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[   52.366998] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[   52.367130] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[   52.368255] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   52.368382] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.368503] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   52.368595] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   52.368705] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.368798] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   52.368956] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   52.369050] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[   52.369107] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.369164] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[   52.369224] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   52.369253] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[   52.369312] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[   52.369339] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[   52.369519] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   52.369755] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   52.369770] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   52.370635] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   52.371154] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   52.371289] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   52.371405] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   52.371579] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   52.371584] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.371585] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.371587] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   52.371589] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.371590] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   52.371593] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.371595] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   52.371597] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.371616] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   52.371721] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   52.372391] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   52.372498] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   52.373760] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<7>[   52.374406] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<5>[   52.374900] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.374904] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.374907] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.374959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   52.374978] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.374989] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   52.375000] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   52.375212] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   52.375226] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   52.375234] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   52.375377] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   52.375387] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   52.375395] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   52.375525] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   52.375535] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   52.375540] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   52.375543] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   52.375546] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   52.375682] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   52.375702] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[   52.375706] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[   52.375709] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[   52.375713] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[   52.375729] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   52.375782] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[   52.375858] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<6>[   52.411695] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[   52.411944] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[   52.434692] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[   52.439671] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d95000
<6>[   52.441014] fbcon: xedrmfb (fb0) is primary device
<7>[   52.441791] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[   52.441976] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[   52.442106] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[   52.442241] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[   52.442365] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[   52.442472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[   52.442575] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[   52.442686] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[   52.442798] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, 
<7>[   52.442936] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[   52.443049] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[   52.443142] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   52.443234] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   52.443340] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[   52.443446] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   52.443549] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   52.443652] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   52.443754] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[   52.443869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[   52.443977] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, 
<7>[   52.444078] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[   52.444165] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   52.444247] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   52.444330] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[   52.444412] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   52.444493] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   52.444575] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   52.444656] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[   52.444789] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[   52.445020] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[   52.445232] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[   52.445514] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb (   0 -    0) -> (   0 - 4054), size    0 -> 4054
<7>[   52.445728] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[   52.445934] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   3,    1 ->    2,  12,  12,  12,  11,  12,   0,   0,   0,   3,    0
<7>[   52.446123] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]  blocks   25,  25,  25,  25,  25,  25,   0,   0,   7,  73,    7 ->   49, 289, 289, 289, 265, 289,   0,   0,  63,  73,   87
<7>[   52.446325] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->   55, 319, 319, 319, 293, 319,   0,   0,  64,  82,   88
<7>[   52.446504] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.446679] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.446811] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.446903] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.446993] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.447082] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.447169] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.447255] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.447333] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.447400] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.447468] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.447535] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.447603] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.447669] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.447734] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.447797] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.447900] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.447983] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.448056] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.448121] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.448182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[   52.448274] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   52.448364] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   52.448461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.448555] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.448651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   52.448756] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[   52.448884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[   52.449003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   52.449102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[   52.449185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   52.449265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   52.449344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   52.449420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   52.449497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[   52.449573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   52.449649] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   52.449725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   52.449799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[   52.449889] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   52.449982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[   52.450075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[   52.450161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     pixelformat: RGB
<7>[   52.450234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     colorimetry: sRGB
<7>[   52.450309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     bpc: 0
<7>[   52.450380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     dynamic range: VESA range
<7>[   52.450454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     content type: Not defined
<7>[   52.450533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   52.450606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[   52.450678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[   52.450748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[   52.450820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.450909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.451005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.451099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   52.451179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.451249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   52.451317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   52.451383] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   52.451449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   52.451513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   52.451577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[   52.451641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[   52.451704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   52.451766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.451838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.451923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.452005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.452085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.452161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.452228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.452293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.452358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.452421] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.452483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[   52.452546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[   52.452609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[   52.452670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[   52.452732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[   52.452791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[   52.452866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[   52.452945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[   52.474102] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] 
<7>[   52.679953] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[   52.681326] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[   52.701710] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[   52.702066] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[   52.702084] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   52.702358] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[   52.702390] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   52.754776] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   52.755049] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   52.785027] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   52.785471] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[   52.785455] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.786604] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[   52.786612] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.787794] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[   52.788087] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[   52.788330] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[   52.788558] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[   52.788769] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[   52.788996] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[   52.789226] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[   52.789427] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[   52.789631] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[   52.789808] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   52.789853] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[   52.790090] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[   52.790081] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   52.790295] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[   52.790347] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[   52.790501] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[   52.790645] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.790715] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   52.791990] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[   52.792284] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (494 ms remaining)
<7>[   52.836669] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[   53.294986] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[   53.295306] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   53.295559] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[   53.295857] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[   53.332048] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   53.332332] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   53.332598] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[   53.332901] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   53.415777] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.415846] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.415950] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.624377] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   53.626585] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   53.626995] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[   53.630469] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   53.631787] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[   53.633181] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[   53.634503] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[   53.635753] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[   53.637242] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[   53.637610] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[   53.639391] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[   53.639749] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[   53.640612] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[   53.641206] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] 
<7>[   53.641611] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[   53.642129] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[   53.644387] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[   53.644409] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[   53.644723] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[   53.658095] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[   53.660670] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[   53.661134] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[   53.662508] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[   53.665148] Console: switching to colour frame buffer device 180x56
<6>[   53.679501] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[   53.692985] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[   53.693364] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[   53.693629] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[   53.693903] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[   53.694138] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[   53.694357] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[   53.694573] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[   53.694779] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[   53.695008] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[   53.695254] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[   53.695448] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[   53.695637] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[   53.695841] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[   53.696076] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[   53.696272] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[   53.696457] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[   53.696642] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[   53.696835] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[   53.697077] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[   53.697290] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[   53.697490] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[   53.697689] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[   53.698666] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[   53.698947] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[   53.699219] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[   53.699333] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]] 
<7>[   53.699379] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   53.700440] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[   53.700723] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[   53.700978] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   53.701012] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   53.701019] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   53.702305] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   53.704975] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   53.705388] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   53.705755] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   53.706628] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   53.706656] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.706664] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.706672] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   53.706684] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.706691] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   53.706711] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.706718] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   53.706731] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.706827] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   53.707138] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   53.707515] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[   53.708165] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   53.708525] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   53.712370] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   53.713256] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   53.713632] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<5>[   53.715463] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.715477] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.715483] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.715678] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   53.715759] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   53.715795] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   53.717663] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   53.718264] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   53.718623] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   53.718679] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   53.718710] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   53.719086] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   53.719379] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   53.719414] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   53.719443] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   53.719796] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   53.720186] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   53.720229] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   53.720250] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   53.720263] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   53.720273] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   53.721079] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   53.721166] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[   53.721180] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[   53.721191] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[   53.721201] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[   53.721286] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   53.725549] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   53.725935] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[   53.743106] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[   53.754965] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[   53.758776] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[   53.761030] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[   53.761337] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[   53.775439] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[   53.775532] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[   53.775613] [IGT] xe_module_load: exiting, ret=0
<7>[   53.805175] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.805316] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.805420] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.805517] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.805611] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.805704] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.805792] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.805904] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.805993] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.806081] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.806167] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.806254] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.806339] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.806425] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.806511] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.806865] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.806973] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.807078] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.807182] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.807284] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.807384] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.807483] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.807582] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.807680] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.807778] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.807890] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.807989] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.808085] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.808227] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.808327] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.808425] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.808522] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.808620] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.808716] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.808821] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.808922] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[   53.815667] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<7>[   53.817610] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[   53.817733] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<6>[   53.820236] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[   53.821327] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[   53.822368] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[   53.822853] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   53.822994] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   53.823093] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   54.760375] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   54.760514] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   54.760643] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   55.062557] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   56.233033] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[   56.233517] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067