<5>[ 0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Feb 27 17:16:24 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem281: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem283: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000379] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000380] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004671] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004681] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004699] Using GB pages for direct mapping
<6>[ 0.005358] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005359] printk: early log buf free: 258912(98%)
<6>[ 0.005359] Secure boot disabled
<6>[ 0.005361] ACPI: Early table checksum verification disabled
<6>[ 0.005364] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005366] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005370] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005373] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005375] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005376] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005378] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005379] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005380] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005381] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005383] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005384] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005385] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005388] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005389] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005391] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005392] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005393] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005394] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005396] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005397] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005398] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005401] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005402] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005403] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005405] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005406] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005407] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005409] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005410] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005411] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005412] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005413] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005415] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005416] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005417] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005419] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005420] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005421] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005422] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005424] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005425] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005426] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005428] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005429] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005430] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005432] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005433] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005434] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005435] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005436] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005436] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005439] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005439] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005440] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005442] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005442] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005443] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005443] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005444] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005444] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005444] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005445] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005445] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005445] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005445] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005446] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005446] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005446] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005447] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005447] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005447] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005447] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005448] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005448] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005448] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005449] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005449] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005449] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005450] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005518] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005727] No NUMA configuration found
<6>[ 0.005728] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005733] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005842] Zone ranges:
<6>[ 0.005843] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005844] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005844] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005845] Device empty
<6>[ 0.005845] Movable zone start for each node
<6>[ 0.005846] Early memory node ranges
<6>[ 0.005846] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005847] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005848] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005848] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 0.005849] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005854] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005871] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007907] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036515] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 0.036581] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.037051] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.037058] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.037109] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.037110] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.037111] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037114] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037114] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037126] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 0.037132] TSC deadline timer available
<6>[ 0.037134] CPU topo: Max. logical packages: 1
<6>[ 0.037134] CPU topo: Max. logical dies: 1
<6>[ 0.037135] CPU topo: Max. dies per package: 1
<6>[ 0.037136] CPU topo: Max. threads per core: 1
<6>[ 0.037137] CPU topo: Num. cores per package: 8
<6>[ 0.037137] CPU topo: Num. threads per package: 8
<6>[ 0.037137] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037149] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037151] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037151] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 0.037152] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 0.037153] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037153] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037154] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037154] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037155] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037155] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037155] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037155] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 0.037157] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037158] Booting paravirtualized kernel on bare hardware
<6>[ 0.037160] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037168] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037516] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037520] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037522] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037534] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[ 0.037621] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037636] random: crng init done
<6>[ 0.039497] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040428] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040483] Fallback order for Node 0: 0
<6>[ 0.040486] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 0.040487] Policy zone: Normal
<6>[ 0.040496] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.040496] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040498] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041435] software IO TLB: area num 8.
<4>[ 0.086830] **********************************************************
<4>[ 0.086831] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086831] ** **
<4>[ 0.086832] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086832] ** via the console, logs, and other interfaces. This **
<4>[ 0.086832] ** might reduce the security of your system. **
<4>[ 0.086832] ** **
<4>[ 0.086833] ** If you see this message and you are not debugging **
<4>[ 0.086833] ** the kernel, report this immediately to your system **
<4>[ 0.086833] ** administrator! **
<4>[ 0.086833] ** **
<4>[ 0.086833] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086834] **********************************************************
<6>[ 0.087926] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.088250] ftrace: allocating 59524 entries in 233 pages
<6>[ 0.113707] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114904] Dynamic Preempt: voluntary
<6>[ 0.115351] Running RCU self tests
<6>[ 0.115351] Running RCU synchronous self tests
<6>[ 0.115352] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115352] rcu: RCU lockdep checking is enabled.
<6>[ 0.115352] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115353] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115353] Rude variant of Tasks RCU enabled.
<6>[ 0.115353] Tracing variant of Tasks RCU enabled.
<6>[ 0.115354] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115354] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115393] Running RCU synchronous self tests
<6>[ 0.115399] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115402] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115404] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125473] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.125926] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.126260] Console: colour dummy device 80x25
<6>[ 0.126268] printk: legacy console [tty0] enabled
<6>[ 0.127438] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127445] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127449] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127452] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127456] ... CLASSHASH_SIZE: 4096
<6>[ 0.127459] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127463] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127467] ... CHAINHASH_SIZE: 262144
<6>[ 0.127470] memory used by lock dependency info: 54145 kB
<6>[ 0.127475] memory used for stack traces: 4224 kB
<6>[ 0.127479] per task-struct memory footprint: 1920 bytes
<6>[ 0.127528] ACPI: Core revision 20240827
<6>[ 0.128416] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128480] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128486] DMAR: Host address width 38
<6>[ 0.128489] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128523] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128556] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128578] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128603] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128624] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128657] DMAR: SATC flags: 0x1
<6>[ 0.128665] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128671] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128675] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130726] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.135869] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.135887] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.135959] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.135965] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.136137] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.136142] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.136151] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.136159] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.136163] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.136171] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.136178] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.136194] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.136201] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.136207] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.136212] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.136218] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.136225] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.136230] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.136235] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.136240] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.136881] Freeing SMP alternatives memory: 48K
<6>[ 0.136881] pid_max: default: 32768 minimum: 301
<6>[ 0.136881] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.136881] landlock: Up and running.
<6>[ 0.136881] Yama: becoming mindful.
<6>[ 0.136881] AppArmor: AppArmor initialized
<6>[ 0.136881] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136881] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136881] Running RCU synchronous self tests
<6>[ 0.136881] Running RCU synchronous self tests
<6>[ 0.136881] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.136881] Running RCU Tasks wait API self tests
<6>[ 0.136881] Running RCU Tasks Rude wait API self tests
<6>[ 0.136881] Running RCU Tasks Trace wait API self tests
<6>[ 0.136881] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.136881] core: cpu_core PMU driver:
<6>[ 0.136881] ... version: 6
<6>[ 0.136881] ... bit width: 48
<6>[ 0.136881] ... generic registers: 10
<6>[ 0.136881] ... value mask: 0000ffffffffffff
<6>[ 0.136886] ... max period: 00007fffffffffff
<6>[ 0.136890] ... fixed-purpose events: 4
<6>[ 0.136893] ... event mask: 0001000f000003ff
<6>[ 0.136929] signal: max sigframe size: 3632
<6>[ 0.136951] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.137032] rcu: Hierarchical SRCU implementation.
<6>[ 0.137036] rcu: Max phase no-delay instances is 400.
<6>[ 0.137951] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139775] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.140041] smp: Bringing up secondary CPUs ...
<6>[ 0.140390] smpboot: x86: Booting SMP configuration:
<6>[ 0.140396] .... node #0, CPUs: #1 #2
<6>[ 0.142040] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.146381] #3 #4 #5 #6 #7
<6>[ 0.010772] core: cpu_atom PMU driver:
<6>[ 0.010772] ... version: 6
<6>[ 0.010772] ... bit width: 48
<6>[ 0.010772] ... generic registers: 8
<6>[ 0.010772] ... value mask: 0000ffffffffffff
<6>[ 0.010772] ... max period: 00007fffffffffff
<6>[ 0.010772] ... fixed-purpose events: 6
<6>[ 0.010772] ... event mask: 00000077000000ff
<6>[ 0.156981] smp: Brought up 1 node, 8 CPUs
<6>[ 0.156981] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.158551] Memory: 32344584K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775236K reserved, 0K cma-reserved)
<6>[ 0.159149] devtmpfs: initialized
<6>[ 0.159149] x86/mm: Memory block size: 128MB
<6>[ 0.175363] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.176070] Running RCU synchronous self tests
<6>[ 0.176083] Running RCU synchronous self tests
<6>[ 0.176099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.176099] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.176207] pinctrl core: initialized pinctrl subsystem
<6>[ 0.176883] PM: RTC time: 20:16:31, date: 2025-02-27
<6>[ 0.177709] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.178681] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.178990] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.179275] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.179336] audit: initializing netlink subsys (disabled)
<5>[ 0.179374] audit: type=2000 audit(1740687391.043:1): state=initialized audit_enabled=0 res=1
<6>[ 0.180286] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.180288] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.180295] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.180300] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.180306] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.180353] EISA bus registered
<6>[ 0.180391] cpuidle: using governor ladder
<6>[ 0.180391] cpuidle: using governor menu
<6>[ 0.180391] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.181124] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.181153] PCI: Using configuration type 1 for base access
<6>[ 0.181298] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.182013] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.182013] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.182013] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.182013] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.200882] raid6: avx2x4 gen() 77216 MB/s
<6>[ 0.217883] raid6: avx2x2 gen() 82107 MB/s
<6>[ 0.234883] raid6: avx2x1 gen() 70776 MB/s
<6>[ 0.234887] raid6: using algorithm avx2x2 gen() 82107 MB/s
<6>[ 0.251883] raid6: .... xor() 52617 MB/s, rmw enabled
<6>[ 0.251888] raid6: using avx2x2 recovery algorithm
<6>[ 0.254335] fbcon: Taking over console
<6>[ 0.254882] ACPI: Added _OSI(Module Device)
<6>[ 0.254882] ACPI: Added _OSI(Processor Device)
<6>[ 0.254882] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.254882] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.759589] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.797207] ACPI: EC: EC started
<6>[ 0.797236] ACPI: EC: interrupt blocked
<6>[ 0.804859] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.804874] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.901911] Callback from call_rcu_tasks() invoked.
<6>[ 1.151423] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.151453] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.195934] ACPI: Interpreter enabled
<6>[ 1.195934] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.195934] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.203800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.203817] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.235443] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.235514] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.300050] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.300534] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.305136] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.616119] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.649091] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.788914] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.790734] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.799191] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.808563] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.808812] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.809052] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.907866] ACPI: \: Can't tag data node
<3>[ 1.910593] ACPI: \: Can't tag data node
<3>[ 1.913418] ACPI: \: Can't tag data node
<3>[ 1.915698] ACPI: \: Can't tag data node
<3>[ 1.918435] ACPI: \: Can't tag data node
<6>[ 2.085203] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.085716] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.086526] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.087009] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.087489] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.088797] ACPI: \PIN_: New power resource
<6>[ 2.092494] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.092509] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.095960] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.105336] PCI host bridge to bus 0000:00
<6>[ 2.105367] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.105374] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.105381] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.105388] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.105395] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.105404] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.108614] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.109190] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.109281] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.109290] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.109299] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.109343] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.110556] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.110585] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 2.111740] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.111769] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.111777] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 2.113327] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.113370] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.113382] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.113400] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.113535] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.113590] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.117768] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.117811] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.117823] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.117841] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.117964] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.118017] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.122362] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.122413] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.122424] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.122443] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.122567] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.122624] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.126530] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.126567] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 2.126581] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.126783] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.126811] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.126819] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 2.127206] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.127259] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 2.127331] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.129183] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.129236] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 2.129244] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 2.129303] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.129307] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.130541] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.130593] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 2.130601] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 2.130659] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.130663] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.131879] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.131958] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 2.132235] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.134573] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.134668] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 2.134766] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.135160] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.135213] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 2.135280] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.137135] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.137198] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 2.137207] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 2.137501] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.137613] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.139007] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.139105] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.140462] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.140576] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.142521] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.142632] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.144213] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.144310] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 2.144406] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.146701] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.146777] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 2.146783] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 2.147027] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.147060] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.147068] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.147075] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.147199] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.147256] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.152353] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.152459] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.152490] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.152830] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.152991] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.157892] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.159294] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.159409] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 2.159424] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 2.159535] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.160257] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.160322] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 2.160334] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.161450] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.161633] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.161848] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.161909] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.161976] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.163050] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 2.163106] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 2.163114] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 2.163122] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 2.163421] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.163586] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.163736] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.164185] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.164257] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.164267] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.164276] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.164440] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.164443] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.164995] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.167300] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.169916] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.169975] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.170516] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.170575] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.628629] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 12.278497] Low-power S0 idle used by default for system suspend
<6>[ 12.329684] ACPI: EC: interrupt unblocked
<6>[ 12.329694] ACPI: EC: event unblocked
<6>[ 12.329730] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 12.329736] ACPI: EC: GPE=0x6e
<6>[ 12.329742] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 12.329751] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 12.330237] iommu: Default domain type: Translated
<6>[ 12.330237] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 12.331962] SCSI subsystem initialized
<7>[ 12.332282] libata version 3.00 loaded.
<6>[ 12.333414] ACPI: bus type USB registered
<6>[ 12.334038] usbcore: registered new interface driver usbfs
<6>[ 12.334142] usbcore: registered new interface driver hub
<6>[ 12.334252] usbcore: registered new device driver usb
<6>[ 12.334549] pps_core: LinuxPPS API ver. 1 registered
<6>[ 12.334560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 12.334612] PTP clock support registered
<6>[ 12.335282] EDAC MC: Ver: 3.0.0
<6>[ 12.338131] efivars: Registered efivars operations
<6>[ 12.341647] NetLabel: Initializing
<6>[ 12.341658] NetLabel: domain hash size = 128
<6>[ 12.341668] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 12.341839] NetLabel: unlabeled traffic allowed by default
<6>[ 12.341879] mctp: management component transport protocol core
<6>[ 12.341889] NET: Registered PF_MCTP protocol family
<6>[ 12.341974] PCI: Using ACPI for IRQ routing
<7>[ 12.403894] PCI: pci_cache_line_size set to 64 bytes
<6>[ 12.404218] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 12.404516] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 12.404534] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 12.404542] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 12.404548] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 12.404555] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 12.405946] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 12.405972] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 12.405984] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 12.405984] vgaarb: loaded
<6>[ 12.407128] clocksource: Switched to clocksource tsc-early
<5>[ 12.408177] VFS: Disk quotas dquot_6.6.0
<6>[ 12.408205] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 12.409264] AppArmor: AppArmor Filesystem Enabled
<6>[ 12.409464] pnp: PnP ACPI init
<6>[ 12.410393] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 12.410405] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 12.411721] system 00:02: [io 0x06a4] has been reserved
<6>[ 12.411730] system 00:02: [io 0x06a0] has been reserved
<6>[ 12.432573] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 12.432585] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 12.432595] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 12.432605] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 12.432613] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 12.432622] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 12.432631] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 12.432638] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 12.435756] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 12.438081] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 12.438234] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 12.443275] pnp: PnP ACPI: found 8 devices
<6>[ 12.464311] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 12.464530] NET: Registered PF_INET protocol family
<6>[ 12.464710] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.466833] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 12.466976] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 12.467131] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.467954] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 12.468989] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 12.469395] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.470067] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.470730] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 12.470802] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 12.470812] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 12.470820] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 12.470858] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 12.470864] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 12.470869] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 12.470875] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 12.470924] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 12.470971] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 12.471019] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 12.471066] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 12.471098] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 12.471108] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 12.471117] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 12.471125] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.471137] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 12.471143] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 12.471155] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 12.471162] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.471174] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 12.471180] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 12.471189] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 12.471197] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.471209] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 12.471214] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 12.471222] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 12.471234] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 12.471270] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 12.471316] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 12.471321] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 12.471326] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 12.471331] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 12.471336] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 12.471341] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 12.471346] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 12.471350] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.471356] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 12.471360] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 12.471365] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.471370] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 12.471374] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 12.471379] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.471384] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 12.471388] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 12.471393] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 12.472286] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 12.473852] PCI: CLS 0 bytes, default 64
<6>[ 12.473946] DMAR: No RMRR found
<6>[ 12.473955] DMAR: No ATSR found
<6>[ 12.473958] DMAR: dmar1: Using Queued invalidation
<6>[ 12.474027] DMAR: dmar0: Using Queued invalidation
<6>[ 12.474034] DMAR: dmar2: Using Queued invalidation
<6>[ 12.475066] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 12.475129] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 12.475186] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 12.475233] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 12.479792] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 12.482818] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 12.482882] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 12.482938] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 12.482991] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 12.483064] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 12.483101] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 12.483136] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 12.483194] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 12.483249] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 12.483312] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 12.483349] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 12.483427] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 12.483466] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 12.483504] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 12.483540] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 12.483603] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 12.483641] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 12.483695] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 12.483770] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 12.483881] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 12.483923] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 12.483962] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 12.484000] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 12.484041] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 12.484079] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 12.484129] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 12.484202] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 12.492997] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 12.493060] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 12.493113] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 12.498326] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 12.498412] clocksource: Switched to clocksource tsc
<6>[ 12.498605] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 12.506738] Initialise system trusted keyrings
<5>[ 12.506872] Key type blacklist registered
<6>[ 12.507730] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 12.515237] zbud: loaded
<6>[ 12.516396] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 12.516474] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 12.516478] ntfs3: Read-only LZX/Xpress compression included
<5>[ 12.516793] integrity: Platform Keyring initialized
<5>[ 12.516811] integrity: Machine keyring initialized
<6>[ 12.520668] xor: automatically using best checksumming function avx
<5>[ 12.520674] Key type asymmetric registered
<5>[ 12.520682] Asymmetric key parser 'x509' registered
<6>[ 12.520761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 12.521314] io scheduler mq-deadline registered
<6>[ 12.522212] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 12.523222] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 12.523882] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 12.526019] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 12.526868] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 12.528334] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 12.528964] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 12.529668] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 12.530293] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 12.532480] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 12.533361] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 12.534046] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 12.535765] Monitor-Mwait will be used to enter C-1 state
<7>[ 12.535809] Monitor-Mwait will be used to enter C-2 state
<7>[ 12.535930] Monitor-Mwait will be used to enter C-3 state
<6>[ 12.541856] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 12.541974] ACPI: button: Lid Switch [LID0]
<6>[ 12.542128] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 12.542235] ACPI: button: Sleep Button [SLPB]
<6>[ 12.542362] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 12.542521] ACPI: button: Power Button [PWRB]
<4>[ 12.550342] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.556052] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.562866] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.570371] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.579087] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.586883] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.593887] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.600679] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 12.707952] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 12.707967] ACPI: thermal: Thermal Zone [TZ00] (76 C)
<6>[ 12.709547] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 12.709681] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 12.710952] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 12.732680] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 12.746461] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 12.748308] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 12.771147] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 12.773070] hpet_acpi_add: no address or irqs in _CRS
<6>[ 12.773319] Linux agpgart interface v0.103
<6>[ 12.774114] ACPI: bus type drm_connector registered
<6>[ 12.792583] loop: module loaded
<6>[ 12.835853] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 12.961108] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 13.111871] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 13.238854] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 13.365159] Key type psk registered
<6>[ 13.372165] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 13.373089] tun: Universal TUN/TAP device driver, 1.6
<6>[ 13.373863] nvme nvme0: pci function 0000:80:00.0
<6>[ 13.374324] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.374483] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 13.377034] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.379945] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.379991] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 13.380034] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.380684] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.380719] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.380737] usb usb1: Product: xHCI Host Controller
<6>[ 13.380750] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.380764] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 13.384221] hub 1-0:1.0: USB hub found
<6>[ 13.384376] hub 1-0:1.0: 1 port detected
<6>[ 13.398830] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.398858] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.398877] usb usb2: Product: xHCI Host Controller
<6>[ 13.398889] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.398903] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 13.401918] hub 2-0:1.0: USB hub found
<6>[ 13.402269] hub 2-0:1.0: 3 ports detected
<6>[ 13.414998] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 13.430267] nvme0n1: p1 p2
<6>[ 13.451148] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.451195] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 13.453081] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.455192] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.455221] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 13.455246] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.455544] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.455559] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.455570] usb usb3: Product: xHCI Host Controller
<6>[ 13.455577] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.455586] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 13.456337] hub 3-0:1.0: USB hub found
<6>[ 13.456388] hub 3-0:1.0: 8 ports detected
<6>[ 13.485562] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.485584] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.485594] usb usb4: Product: xHCI Host Controller
<6>[ 13.485602] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.485610] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 13.486333] hub 4-0:1.0: USB hub found
<6>[ 13.486379] hub 4-0:1.0: 2 ports detected
<6>[ 13.494480] usbcore: registered new interface driver usb-storage
<6>[ 13.494646] usbcore: registered new interface driver usbserial_generic
<6>[ 13.494755] usbserial: USB Serial support registered for generic
<6>[ 13.494828] usbcore: registered new interface driver ftdi_sio
<6>[ 13.494865] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 13.494921] usbcore: registered new interface driver pl2303
<6>[ 13.494964] usbserial: USB Serial support registered for pl2303
<6>[ 13.495105] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 13.495115] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 14.203908] i8042: Can't read CTR while initializing i8042
<3>[ 14.203923] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 14.204380] mousedev: PS/2 mouse device common for all mice
<6>[ 14.205374] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 14.207196] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 14.207416] rtc_cmos rtc_cmos: setting system clock to 2025-02-27T20:16:45 UTC (1740687405)
<6>[ 14.207588] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 14.207640] i2c_dev: i2c /dev entries driver
<6>[ 14.211795] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 14.211812] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 14.211822] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 14.211871] device-mapper: uevent: version 1.0.3
<6>[ 14.212238] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 14.212369] platform eisa.0: Probing EISA bus 0
<4>[ 14.212383] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 14.212397] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 14.212409] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 14.212421] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 14.212433] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 14.212444] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 14.212456] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 14.212472] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 14.212483] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 14.212493] platform eisa.0: EISA: Detected 0 cards
<6>[ 14.212503] intel_pstate: Intel P-state driver initializing
<6>[ 14.215841] Hybrid CPU capacity scaling enabled
<6>[ 14.217022] intel_pstate: HWP enabled
<6>[ 14.217033] sdhci: Secure Digital Host Controller Interface driver
<6>[ 14.217041] sdhci: Copyright(c) Pierre Ossman
<6>[ 14.217198] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 14.219812] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 14.220886] drop_monitor: Initializing network drop monitor service
<6>[ 14.221177] NET: Registered PF_INET6 protocol family
<6>[ 14.225385] Segment Routing with IPv6
<6>[ 14.225451] In-situ OAM (IOAM) with IPv6
<6>[ 14.225507] NET: Registered PF_PACKET protocol family
<5>[ 14.225717] Key type dns_resolver registered
<4>[ 14.228825] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 14.229116] microcode: Current revision: 0x0000011b
<6>[ 14.229647] IPI shorthand broadcast: enabled
<6>[ 14.239966] sched_clock: Marking stable (14230002579, 9772192)->(14309964789, -70190018)
<6>[ 14.240662] registered taskstats version 1
<5>[ 14.241866] Loading compiled-in X.509 certificates
<6>[ 14.271595] Demotion targets for Node 0: null
<6>[ 14.271812] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 14.271826] kmemleak: Automatic memory scanning thread started
<5>[ 14.272042] Key type .fscrypt registered
<5>[ 14.272047] Key type fscrypt-provisioning registered
<6>[ 14.274833] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 14.276463] Key type encrypted registered
<6>[ 14.276473] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 14.276555] ima: No TPM chip found, activating TPM-bypass!
<5>[ 14.276571] Loading compiled-in module X.509 certificates
<5>[ 14.277412] Loaded X.509 cert 'Build time autogenerated kernel key: 1e13e8e3435463a0eb2fa8b3830dc7977db5395e'
<6>[ 14.277427] ima: Allocated hash algorithm: sha256
<6>[ 14.277473] ima: No architecture policies found
<6>[ 14.277571] evm: Initialising EVM extended attributes:
<6>[ 14.277576] evm: security.selinux
<6>[ 14.277579] evm: security.SMACK64
<6>[ 14.277581] evm: security.SMACK64EXEC
<6>[ 14.277584] evm: security.SMACK64TRANSMUTE
<6>[ 14.277588] evm: security.SMACK64MMAP
<6>[ 14.277590] evm: security.apparmor
<6>[ 14.277593] evm: security.ima
<6>[ 14.277596] evm: security.capability
<6>[ 14.277599] evm: HMAC attrs: 0x1
<6>[ 14.279683] PM: Magic number: 13:845:296
<6>[ 14.279700] i2c_designware i2c_designware.3: hash matches
<6>[ 14.279746] tty tty29: hash matches
<6>[ 14.279845] memory memory158: hash matches
<6>[ 14.279962] printk: legacy console [netcon0] enabled
<6>[ 14.279970] netconsole: network logging started
<6>[ 14.280585] RAS: Correctable Errors collector initialized.
<6>[ 14.281182] clk: Disabling unused clocks
<6>[ 14.281196] PM: genpd: Disabling unused power domains
<6>[ 14.281641] md: Waiting for all devices to be available before autodetect
<6>[ 14.281647] md: If you don't use raid, use raid=noautodetect
<6>[ 14.281652] md: Autodetecting RAID arrays.
<6>[ 14.281660] md: autorun ...
<6>[ 14.281664] md: ... autorun DONE.
<6>[ 14.329119] EXT4-fs (nvme0n1p2): mounted filesystem 7dfac1f5-10ea-4066-a63e-e14654e0601e ro with ordered data mode. Quota mode: none.
<6>[ 14.329187] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 14.329751] devtmpfs: mounted
<6>[ 14.340694] Freeing unused decrypted memory: 2028K
<6>[ 14.341537] Freeing unused kernel image (initmem) memory: 5632K
<6>[ 14.341560] Write protecting the kernel read-only data: 34816k
<6>[ 14.341880] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[ 14.342135] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[ 14.347471] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 14.347857] Run /sbin/init as init process
<7>[ 14.347867] with arguments:
<7>[ 14.347868] /sbin/init
<7>[ 14.347870] with environment:
<7>[ 14.347871] HOME=/
<7>[ 14.347871] TERM=linux
<7>[ 14.347872] BOOT_IMAGE=/boot/drm_intel
<7>[ 14.398326] systemd[1]: Inserted module 'autofs4'
<7>[ 14.422017] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 14.422085] systemd[1]: Detected architecture x86-64.
<7>[ 14.424160] systemd[1]: Hostname set to <shard-lnl-7>.
<7>[ 14.723381] systemd[1]: Queued start job for default target graphical.target.
<7>[ 14.769322] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 14.773999] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 14.776499] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 14.776985] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 14.778231] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 14.778459] systemd[1]: Expecting device dev-disk-by\x2duuid-BB9D\x2d0E2E.device - /dev/disk/by-uuid/BB9D-0E2E...
<7>[ 14.778620] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 14.778781] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 14.778906] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 14.779024] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 14.779154] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 14.779630] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 14.780341] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 14.780867] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 14.781417] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 14.781883] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 14.782250] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 14.782768] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 14.783337] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 14.783851] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 14.784216] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 14.784965] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 14.785457] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 14.803355] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 14.807692] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 14.811895] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 14.816222] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 14.824508] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 14.828656] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 14.833189] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 14.838361] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 14.843043] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 14.846896] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 14.852140] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 14.856747] systemd-journald[214]: Collecting audit messages is disabled.
<7>[ 14.857462] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 14.863522] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 14.866619] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 14.873119] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 14.873266] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 14.877397] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 14.881025] pstore: Using crash dump compression: deflate
<7>[ 14.882376] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 14.882485] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 14.882561] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 14.886150] pstore: Registered efi_pstore as persistent store backend
<7>[ 14.888685] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 14.889692] fuse: init (API version 7.42)
<7>[ 14.895532] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.042361] EXT4-fs (nvme0n1p2): re-mounted 7dfac1f5-10ea-4066-a63e-e14654e0601e r/w. Quota mode: none.
<6>[ 15.078894] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:320602112k SS
<7>[ 15.100647] systemd-journald[214]: Received client request to flush runtime journal.
<7>[ 15.116429] systemd-journald[214]: /var/log/journal/d99f231fc73949389b52e126c183b290/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 15.116446] systemd-journald[214]: Rotating system journal.
<4>[ 15.792347] nvme nvme0: using unchecked data buffer
<6>[ 15.921951] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 15.937445] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 15.951172] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951197] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951222] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951246] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951271] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951295] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951320] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951345] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951369] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951394] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951419] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951443] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951468] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951492] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951517] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951542] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951566] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951602] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951627] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951651] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951676] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951700] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951725] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951750] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951778] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951803] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951824] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951867] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951887] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951911] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951936] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951961] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.951996] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.952019] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.952044] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.952068] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.952093] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.952118] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 15.965874] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 15.970100] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 15.980390] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 15.982622] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.982646] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.982671] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.982695] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.982708] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.982720] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.982744] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.982757] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.982969] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983039] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983074] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983121] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983251] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983274] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983299] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983335] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983371] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983395] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983408] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983420] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983433] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983445] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983458] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983470] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983483] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983495] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983508] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983520] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983533] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.983545] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<3>[ 16.017419] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<4>[ 16.026710] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026734] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026753] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026779] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026799] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026819] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026839] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026914] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026935] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026955] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026967] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.026980] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027000] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027012] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027025] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027029] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027034] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027047] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027064] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027072] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027079] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027087] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027105] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027126] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027146] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027192] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027212] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027232] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027244] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027258] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027278] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027298] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027318] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027338] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027351] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027371] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027391] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027411] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.027431] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<3>[ 16.033606] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 16.051434] pci 0000:00:05.0: Setting to D3hot
<4>[ 16.053508] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.053533] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.062842] pci 0000:00:0b.0: Setting to D3hot
<4>[ 16.074872] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.075145] intel_pmc_core INT33A1:00: initialized
<5>[ 16.125208] audit: type=1400 audit(1740687407.416:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=428 comm="apparmor_parser"
<5>[ 16.125825] audit: type=1400 audit(1740687407.416:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=429 comm="apparmor_parser"
<5>[ 16.128097] audit: type=1400 audit(1740687407.419:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=430 comm="apparmor_parser"
<5>[ 16.128934] audit: type=1400 audit(1740687407.420:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=431 comm="apparmor_parser"
<5>[ 16.132230] audit: type=1400 audit(1740687407.423:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=432 comm="apparmor_parser"
<5>[ 16.139993] audit: type=1400 audit(1740687407.431:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=433 comm="apparmor_parser"
<5>[ 16.140560] audit: type=1400 audit(1740687407.431:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=436 comm="apparmor_parser"
<5>[ 16.141041] audit: type=1400 audit(1740687407.432:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=434 comm="apparmor_parser"
<5>[ 16.141327] audit: type=1400 audit(1740687407.432:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=437 comm="apparmor_parser"
<5>[ 16.146120] audit: type=1400 audit(1740687407.437:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=438 comm="apparmor_parser"
<4>[ 16.214192] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214216] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214236] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214256] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214276] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214296] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214316] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214336] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214356] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214412] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214432] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214500] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214520] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214564] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214585] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214605] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214624] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214680] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214712] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214732] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214752] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214792] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214812] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214832] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214852] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214908] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214964] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.214984] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215004] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215048] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215068] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215088] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215108] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215128] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215148] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215168] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215188] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215208] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215227] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215247] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215267] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215287] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215307] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215327] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.215347] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.507922] ACPI: bus type thunderbolt registered
<6>[ 16.519528] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 16.527460] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 16.553290] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 16.560700] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 16.560706] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 16.560825] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 16.563120] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 16.566405] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 16.569654] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 16.570566] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 16.571283] intel_rapl_common: Found RAPL domain package
<6>[ 16.571290] intel_rapl_common: Found RAPL domain dram
<6>[ 16.585993] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 16.586002] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 16.587871] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 16.716673] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 16.885274] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 16.929723] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 16.929733] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 16.929735] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 16.929736] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 16.929737] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 16.952106] cryptd: max_cpu_qlen set to 1000
<4>[ 16.997554] block nvme0n1: No UUID available providing old NGUID
<6>[ 17.022675] AES CTR mode by8 optimization enabled
<6>[ 17.035239] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 17.071051] evm: overlay not supported
<6>[ 17.122520] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a5:0e:fc, XID 541, IRQ 204
<6>[ 17.122532] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 17.185248] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:30:95
<6>[ 17.185253] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 17.185366] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 17.240663] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 17.268280] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 17.268286] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 17.268288] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 17.701491] loop0: detected capacity change from 0 to 8
<6>[ 17.862061] intel_rapl_common: Found RAPL domain package
<6>[ 17.862364] intel_rapl_common: Found RAPL domain core
<6>[ 17.862367] intel_rapl_common: Found RAPL domain dram
<6>[ 17.862369] intel_rapl_common: Found RAPL domain psys
<6>[ 17.890878] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[ 17.931484] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 17.947957] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[ 18.006925] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 18.006950] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 18.083077] Consider using thermal netlink events interface
<6>[ 18.259909] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 18.263549] hid: raw HID events driver (C) Jiri Kosina
<6>[ 18.270940] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 18.310198] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.311415] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.312766] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.313459] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.314620] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.315263] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.319629] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.322067] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.324970] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.326686] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.328531] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.330040] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.417115] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 19.075141] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 19.075170] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 19.991004] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 19.991030] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 23.749875] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 36.491010] systemd-journald[214]: /var/log/journal/d99f231fc73949389b52e126c183b290/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 77.177029] [IGT] xe_module_load: executing
<7>[ 77.183317] [IGT] xe_module_load: starting subtest load
<5>[ 77.363562] Setting dangerous option force_probe - tainting kernel
<6>[ 77.366459] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 77.368077] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 77.368090] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 77.368217] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 77.368308] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 77.372305] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 77.376220] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 77.376319] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 77.376388] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 77.376453] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 77.376514] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 77.376575] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 77.376636] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 77.376694] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 77.376750] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 77.376805] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 77.376858] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 77.376909] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 77.377023] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 77.377089] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 77.377154] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 77.377272] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 77.378557] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 77.378639] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 77.387945] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 77.388845] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 77.388972] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 77.389106] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 77.389199] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 77.389280] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 77.389360] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 77.389438] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 77.390099] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 77.394446] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 77.394619] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 77.394769] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 77.394933] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 77.395077] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 77.395215] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 77.395350] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 77.395484] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 77.395614] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 77.395750] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 77.395891] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 77.396026] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 77.396156] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 77.396286] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 77.398883] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 77.403835] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 77.405251] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 77.405465] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 77.405736] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 77.407846] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 77.408028] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 77.428153] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 77.428579] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 77.428752] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 77.428967] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 77.429125] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 77.429274] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 77.429421] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 77.429570] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 77.430277] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 77.430602] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 77.430921] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 77.431232] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 77.431511] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 77.431756] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 77.431984] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 77.432254] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 77.432512] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 77.432725] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 77.433038] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 77.433319] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 77.433588] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 77.433886] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 77.434216] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 77.434486] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 77.434753] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 77.435063] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 77.435320] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 77.435562] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 77.435808] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 77.436044] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 77.436273] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 77.436508] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 77.436815] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 77.437049] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 77.437276] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 77.437502] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 77.437713] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 77.437946] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 77.438164] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 77.438345] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 77.438520] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 77.438690] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 77.438875] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 77.439036] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 77.439188] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 77.439337] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 77.439484] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 77.439630] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 77.439780] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 77.440559] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 77.440802] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 77.441003] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 77.441193] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 77.441366] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 77.441557] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 77.441755] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 77.441948] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 77.442116] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 77.442295] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 77.442464] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 77.442629] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 77.442859] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 77.443033] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 77.443236] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 77.443422] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 77.443603] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 77.443808] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 77.444030] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 77.444223] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 77.444415] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 77.444589] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 77.444772] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 77.444938] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 77.445102] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 77.445264] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 77.445428] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 77.445604] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 77.445916] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 77.446240] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 77.446514] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 77.446824] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 77.447145] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 77.447435] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 77.447734] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 77.447968] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 77.448242] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 77.448481] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 77.448530] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 77.448865] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 77.449149] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 77.449387] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 77.449968] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 77.450291] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 77.452363] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 77.452630] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 77.452871] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 77.453084] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 77.453280] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 77.453472] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 77.453656] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 77.453847] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 77.455901] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 77.456123] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 77.456282] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 77.456436] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 77.456584] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 77.456754] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 77.456899] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 77.457030] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 77.457151] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 77.457271] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 77.457383] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 77.457494] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 77.457605] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 77.457724] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 77.457839] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 77.457943] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 77.458041] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 77.458138] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 77.458232] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 77.458324] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 77.458417] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 77.458515] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 77.458654] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 77.458918] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 77.459121] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 77.459315] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 77.459508] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 77.459725] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 77.459933] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 77.460140] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 77.465769] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 77.470950] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<6>[ 77.471215] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 77.471233] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 77.471465] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 77.471735] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 77.472031] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 77.473584] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 77.473850] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 77.474070] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 77.474480] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 77.474698] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 77.474900] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 77.475097] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 77.475291] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 77.475485] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 77.475747] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 77.476005] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 77.476215] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 77.476412] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 77.476602] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 77.476815] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 77.477034] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 77.477314] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 77.478666] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 77.478926] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 77.481233] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 77.481828] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 77.482892] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 77.484552] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 77.485265] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 77.488033] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 77.499155] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 77.499178] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.499182] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.499184] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 77.499190] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.499193] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 77.499203] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.499206] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 77.499211] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.499291] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.499295] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.499297] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.499313] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 77.500010] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 77.500695] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 77.500892] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 77.501129] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 77.501361] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 77.501661] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 77.501764] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 77.501857] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 77.501944] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 77.502029] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 77.502144] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 77.502372] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 77.502566] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 77.502713] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 77.503152] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 77.503294] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 77.503428] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 77.503731] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 77.503864] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 77.503994] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 77.504584] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 77.504735] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 77.504867] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 77.504958] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 77.505046] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 77.505129] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 77.505212] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 77.505294] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 77.505376] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 77.505458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 77.505548] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 77.505631] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 77.505713] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 77.505795] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 77.505875] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 77.505955] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 77.506035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 77.506116] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 77.506196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 77.506277] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 77.506359] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 77.507161] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 77.507287] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 77.507394] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 77.507493] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 77.507593] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 77.507680] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 77.507761] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 77.507845] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 77.507933] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 77.508014] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 77.508092] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 77.508170] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 77.508251] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 77.508337] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 77.508421] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 77.508500] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 77.508589] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 77.508701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 77.508789] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 77.508872] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 77.508954] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 77.509271] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 77.509358] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 77.509438] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 77.509524] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 77.509606] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 77.509685] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 77.509763] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 77.509882] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 77.509966] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 77.510046] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 77.510124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 77.510201] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 77.510279] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 77.510356] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 77.510472] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 77.510563] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 77.510643] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 77.510721] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 77.510798] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 77.510876] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 77.510953] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 77.511110] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 77.511226] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 77.511453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 77.511571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 77.511675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 77.511773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 77.511868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 77.511963] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 77.512056] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 77.512150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 77.512245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 77.512339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 77.512430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 77.512527] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 77.512618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 77.512708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 77.512798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 77.512888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 77.512978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 77.513069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 77.513158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 77.513248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 77.513338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 77.513428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 77.513550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 77.513647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 77.513740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 77.513829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 77.513918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 77.514007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 77.514096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 77.514185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 77.514276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 77.514366] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 77.514456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.514553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.514643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.514731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 77.514818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 77.514905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.514993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.515080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.515167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 77.515255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 77.515343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 77.515588] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 77.515692] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 77.515790] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 77.516179] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 77.516281] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 77.535681] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 77.598459] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 77.746810] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 77.746814] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 77.746815] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 77.746895] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 77.747002] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 77.747096] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 77.747182] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 77.747279] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 77.747371] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 77.747479] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 77.747554] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 77.747634] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 77.747711] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 77.748710] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 77.748792] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 77.748872] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 77.748949] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 77.749028] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 77.749101] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 77.749170] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 77.749240] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 77.749307] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 77.749372] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 77.749439] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 77.749504] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 77.749569] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 77.749632] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 77.749695] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 77.749758] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 77.749832] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 77.749896] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 77.749963] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 77.750030] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 77.750097] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 77.750163] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 77.750227] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 77.750287] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 77.750341] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 77.750396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 77.750458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 77.750520] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 77.750582] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 77.750641] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 77.750700] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 77.750762] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 77.750842] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 77.750914] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 77.750992] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 77.751065] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 77.751139] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 77.751204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 77.751420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 77.751482] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 77.751536] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 77.751751] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 77.751813] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 77.751875] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 77.752251] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 77.752302] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 77.752351] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 77.752400] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 77.752447] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 77.752495] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 77.752915] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 77.753002] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 77.753068] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 77.753129] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 77.753187] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 77.753240] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 77.753290] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 77.753338] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 77.753385] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 77.753432] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 77.753479] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 77.753524] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 77.753569] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 77.753613] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 77.753680] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 77.753959] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 77.756626] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 77.770818] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 77.771629] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 77.771699] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 77.776756] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 77.779568] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 77.779924] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 77.780737] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 77.780819] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 77.780898] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 77.780971] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 77.781049] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 77.781121] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 77.781193] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 77.781263] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 77.781334] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 77.784778] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 77.784859] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 77.784937] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 77.787212] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 77.791810] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 77.791815] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 77.791817] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 77.791819] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 77.791821] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 77.791823] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 77.791825] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 77.791827] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 77.791829] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 77.791831] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 77.791883] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 77.792109] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 77.792327] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 77.793428] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 77.793616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 77.793839] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 77.794021] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 77.794205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 77.794386] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 77.794566] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 77.794773] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 77.794984] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 77.795164] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 77.795338] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 77.795505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 77.795678] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 77.795829] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 77.795977] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 77.796117] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 77.796254] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 77.796389] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 77.796520] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 77.796675] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 77.796821] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 77.796945] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 77.797071] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 77.797210] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 77.797351] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 77.797472] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 77.797613] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 77.798459] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 77.798583] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 77.798919] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 77.799033] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 77.799729] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 77.799842] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 77.799948] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 77.800049] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 77.800149] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 77.800240] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 77.800329] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 77.800415] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 77.800499] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 77.800584] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 77.800679] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 77.800756] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 77.800831] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 77.800905] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 77.801005] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 77.801121] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 77.817328] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 77.818306] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 77.818447] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 77.838036] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 77.838570] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 77.839889] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 77.842982] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 77.845406] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 77.888398] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 77.890487] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 77.890839] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 77.891210] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 77.891484] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 77.892160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 77.892451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 77.892715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 77.892972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 77.893225] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 77.894566] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 77.894956] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 77.895207] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 77.901604] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 77.911619] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 77.916925] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 77.917936] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 77.921932] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 77.922097] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 77.923044] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 77.924495] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 77.924588] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 77.925426] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 77.926903] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 77.926978] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 77.927676] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 77.928645] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 77.928701] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 77.928756] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 77.937790] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 77.940480] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 77.941294] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 77.941397] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 77.942394] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 77.942529] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 77.942654] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 77.942745] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 77.942854] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 77.942945] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 77.943028] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 77.943133] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 77.943233] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 77.943252] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 77.943322] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 77.943362] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 77.943465] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 77.943557] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 77.943724] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 77.943933] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 77.943947] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 77.944758] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 77.945270] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 77.945388] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 77.945503] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 77.945665] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 77.945670] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.945672] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.945673] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 77.945675] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.945676] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 77.945680] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.945681] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 77.945683] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.945718] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 77.945831] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 77.946499] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 77.946608] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 77.947624] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 77.947827] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.947829] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.947831] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.947862] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 77.947873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 77.947884] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 77.947893] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 77.948054] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 77.948066] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 77.948076] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 77.948214] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 77.948224] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 77.948232] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 77.948360] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 77.948369] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 77.948373] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 77.948375] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 77.948378] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 77.948452] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 77.948464] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 77.948467] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 77.948469] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 77.948472] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 77.948483] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 77.948507] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 77.948545] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 77.949389] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 77.955368] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d95000
<6>[ 77.956107] fbcon: xedrmfb (fb0) is primary device
<7>[ 77.956908] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 77.957029] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 77.957129] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 77.957248] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 77.957347] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 77.957446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 77.957544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 77.957638] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 77.957731] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 77.957828] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 77.957923] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 77.958019] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 77.958114] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 77.958216] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 77.958310] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 77.958411] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 77.958504] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 77.958591] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 77.958678] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 77.958766] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 77.958851] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 77.958933] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 77.959014] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 77.959109] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 77.959226] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 77.959323] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 77.959414] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 77.959497] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 77.959578] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 77.959663] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 77.959752] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 77.959883] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 77.959981] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 77.960076] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 77.960176] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 77.960269] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 77.960364] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 77.960455] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.960532] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.960610] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.960686] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 77.960762] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.960837] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.960907] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.960977] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 77.961049] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.961116] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.961197] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.961281] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 77.961362] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.961442] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.961515] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.961584] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 77.961658] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.961727] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.961786] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 77.961846] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 77.961934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 77.962018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 77.962099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 77.962204] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 77.962303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 77.962417] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 77.962522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 77.962612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 77.962699] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 77.962786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 77.962867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 77.962948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 77.963024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 77.963096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 77.963188] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 77.963279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 77.963370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 77.963457] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 77.963534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 77.963608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 77.963684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 77.963760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 77.963833] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 77.963907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 77.963977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 77.964047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 77.964113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 77.964201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 77.964285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 77.964369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 77.964445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 77.964509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 77.964574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 77.964638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 77.964701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 77.964761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 77.964824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 77.964888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 77.964953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 77.965017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 77.965081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 77.965157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 77.965236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 77.965314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 77.965391] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.965457] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.965519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.965577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 77.965638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 77.965701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.965764] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.965826] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 77.965886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 77.965946] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 77.966008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 77.966067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 77.966131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 77.966205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 77.966281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 77.966357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 77.966432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 77.968477] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 77.993172] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 77.993488] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 78.016462] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 78.173584] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 78.174650] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 78.185440] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 78.185560] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 78.185816] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 78.185950] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 78.186344] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 78.238482] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 78.238789] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 78.267256] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 78.267636] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 78.267682] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 78.268405] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 78.268424] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 78.268711] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 78.269021] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 78.269279] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 78.269523] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 78.269772] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 78.270019] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 78.270278] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 78.270566] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 78.270803] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 78.271034] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 78.271301] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 78.271552] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 78.271765] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 78.271993] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 78.273799] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 78.274055] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (494 ms remaining)
<7>[ 78.275802] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 78.276057] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 78.276312] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 78.276606] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 78.421931] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 78.771033] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 78.792100] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 78.792448] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 78.792811] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 78.829046] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 78.829361] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 78.829672] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 78.830029] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 78.986834] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 78.986859] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 78.987006] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 79.120900] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 79.123066] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 79.123402] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 79.126511] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 79.127755] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 79.128775] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 79.130255] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 79.131344] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 79.132649] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 79.133034] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 79.134732] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 79.135053] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 79.135910] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 79.136367] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 79.136696] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 79.137082] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 79.138958] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 79.138979] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 79.139280] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 79.153210] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 79.155447] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 79.155836] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 79.157226] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 79.159651] Console: switching to colour frame buffer device 180x56
<6>[ 79.174592] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 79.184896] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 79.185285] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 79.185553] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 79.185834] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 79.186070] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 79.186295] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 79.186515] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 79.186744] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 79.187001] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 79.187205] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 79.187398] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 79.187592] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 79.187806] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 79.188038] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 79.188234] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 79.188421] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 79.188637] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 79.188859] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 79.189054] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 79.189234] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 79.189416] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 79.189596] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 79.189963] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 79.189997] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 79.190544] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 79.190577] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 79.191979] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 79.192052] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 79.192340] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 79.192630] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 79.193528] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 79.193866] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 79.194166] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 79.194806] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 79.195084] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 79.195282] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 79.195732] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 79.195743] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 79.195745] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 79.195748] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 79.195753] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 79.195756] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 79.195766] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 79.195768] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 79.195773] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 79.195808] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 79.195976] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 79.196704] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 79.196944] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 79.197564] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<5>[ 79.198736] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 79.198742] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 79.198746] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 79.198821] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 79.199367] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 79.199394] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 79.199417] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 79.200529] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 79.200944] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 79.201179] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 79.201465] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 79.202297] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 79.202326] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 79.202597] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 79.203078] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 79.203288] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 79.203313] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 79.203333] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 79.203581] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 79.203804] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 79.203825] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 79.203837] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 79.203843] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 79.203849] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 79.204108] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 79.204146] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 79.204153] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 79.204160] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 79.204166] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 79.204213] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 79.206247] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 79.206489] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 79.220285] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 79.244763] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 79.247858] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 79.248621] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 79.249021] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 79.253407] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 79.254514] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 79.254617] [IGT] xe_module_load: exiting, ret=0
<7>[ 79.289112] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 79.289240] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 79.289331] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 79.289461] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 79.289546] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 79.289628] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 79.289711] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 79.289796] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 79.289881] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 79.289964] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 79.290046] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 79.290127] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 79.290209] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 79.290290] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 79.290370] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 79.290459] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 79.290545] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 79.290626] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 79.290707] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 79.290787] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 79.290868] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 79.290949] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 79.291028] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 79.291108] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 79.291187] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 79.291266] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 79.291347] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 79.291430] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 79.291511] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 79.291592] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 79.291671] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 79.291752] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 79.291833] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 79.291912] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 79.291992] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 79.292072] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 79.299711] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 79.301880] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 79.302687] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 79.305801] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 79.306246] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 79.306392] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 79.306494] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 79.321446] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 79.321585] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 80.264608] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 80.264623] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 80.264599] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 80.314902] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 81.734090] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 81.734526] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067