<5>[    0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Feb 27 17:16:24 UTC 2025
<6>[    0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[    0.000000] KERNEL supported cpus:
<6>[    0.000000]   Intel GenuineIntel
<6>[    0.000000]   AMD AuthenticAMD
<6>[    0.000000]   Hygon HygonGenuine
<6>[    0.000000]   Centaur CentaurHauls
<6>[    0.000000]   zhaoxin   Shanghai  
<6>[    0.000000] x86/tme: not enabled by BIOS
<6>[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[    0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[    0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] APIC: Static calls initialized
<6>[    0.000000] efi: EFI v2.7 by Intel
<6>[    0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000 
<6>[    0.000000] efi: Remove mem281: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[    0.000000] efi: Remove mem283: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[    0.000000] SMBIOS 3.8 present.
<6>[    0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[    0.000000] DMI: Memory slots populated: 8/8
<6>[    0.000000] tsc: Detected 3100.000 MHz processor
<6>[    0.000000] tsc: Detected 3110.400 MHz TSC
<7>[    0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[    0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[    0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[    0.000018] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[    0.000020] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
<6>[    0.000379] x2apic: enabled by BIOS, switching to x2apic ops
<6>[    0.000380] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[    0.004671] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[    0.004679] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[    0.004698] Using GB pages for direct mapping
<6>[    0.005342] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[    0.005344] printk: early log buf free: 258912(98%)
<6>[    0.005344] Secure boot disabled
<6>[    0.005346] ACPI: Early table checksum verification disabled
<6>[    0.005349] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[    0.005351] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005355] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL  LNL      00000002      01000013)
<6>[    0.005358] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL  LNL      00000002      01000013)
<6>[    0.005360] ACPI: FACS 0x000000006FEF1000 000040
<6>[    0.005361] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[    0.005363] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef  Cpu0Ist  00003000 INTL 20210930)
<6>[    0.005364] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef  Cpu0Hwp  00003000 INTL 20210930)
<6>[    0.005365] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20210930)
<6>[    0.005367] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20210930)
<6>[    0.005368] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef  ApIst    00003000 INTL 20210930)
<6>[    0.005369] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef  ApHwp    00003000 INTL 20210930)
<6>[    0.005370] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef  ApPsd    00003000 INTL 20210930)
<6>[    0.005372] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef  ApCst    00003000 INTL 20210930)
<6>[    0.005373] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt  00003000 INTL 20210930)
<6>[    0.005375] ACPI: DTPR 0x000000006FFEC000 000090 (v01                 00000000      00000000)
<6>[    0.005376] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL  PDatTabl 00001000 INTL 20210930)
<6>[    0.005377] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL  IgfxSsdt 00003000 INTL 20210930)
<6>[    0.005379] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL  TseSsdt  00001000 INTL 20210930)
<6>[    0.005380] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL  TcssSsdt 00001000 INTL 20210930)
<6>[    0.005381] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL  IpuSsdt  00001000 INTL 20210930)
<6>[    0.005382] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL  LnlMRvp1 00001000 INTL 20210930)
<6>[    0.005384] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL  I2Pm_Rvp 00001000 INTL 20210930)
<6>[    0.005385] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL  Ther_Rvp 00001000 INTL 20210930)
<6>[    0.005386] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005388] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005389] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL  LNL      00000000      01000013)
<6>[    0.005390] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005391] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL  PepoSsdt 00001000 INTL 20210930)
<6>[    0.005393] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[    0.005394] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[    0.005395] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005396] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL  PtidDevc 00001000 INTL 20210930)
<6>[    0.005398] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL  TbtTypeC 00000000 INTL 20210930)
<6>[    0.005399] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005400] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005402] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005403] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL  UsbCTabl 00001000 INTL 20210930)
<6>[    0.005404] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL  EcSsdt   00000000 INTL 20210930)
<6>[    0.005405] ACPI: ECDT 0x000000006FF85000 000069 (v01        LNL      00000002      01000013)
<6>[    0.005407] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005408] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005409] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL  xh_lnl_m 00000000 INTL 20210930)
<6>[    0.005411] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe   00003000 INTL 20210930)
<6>[    0.005412] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn   00003000 INTL 20210930)
<6>[    0.005413] ACPI: SDEV 0x000000006FFA9000 000046 (v01                 00000000      00000000)
<6>[    0.005414] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL  St09Ssdt 00001000 INTL 20210930)
<6>[    0.005416] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL  Cnv_Ssdt 00001000 INTL 20210930)
<6>[    0.005417] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL  LNL      00000002      01000013)
<6>[    0.005418] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL  LNL      00000005 MSFT 0100000D)
<6>[    0.005420] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005421] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[    0.005422] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[    0.005422] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[    0.005422] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[    0.005423] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[    0.005423] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[    0.005423] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[    0.005424] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[    0.005424] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[    0.005424] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[    0.005424] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[    0.005425] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[    0.005425] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[    0.005425] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[    0.005425] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[    0.005426] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[    0.005426] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[    0.005426] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[    0.005427] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[    0.005427] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[    0.005427] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[    0.005427] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[    0.005428] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[    0.005428] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[    0.005428] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[    0.005429] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[    0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[    0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[    0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[    0.005430] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[    0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[    0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[    0.005431] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[    0.005431] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[    0.005431] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[    0.005431] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[    0.005432] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[    0.005432] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[    0.005432] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[    0.005433] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[    0.005434] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[    0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[    0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[    0.005435] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[    0.005435] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[    0.005435] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[    0.005498] APIC: Switched APIC routing to: cluster x2apic
<6>[    0.005703] No NUMA configuration found
<6>[    0.005703] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[    0.005708] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[    0.005818] Zone ranges:
<6>[    0.005819]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
<6>[    0.005820]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
<6>[    0.005820]   Normal   [mem 0x0000000100000000-0x000000087f7fffff]
<6>[    0.005821]   Device   empty
<6>[    0.005822] Movable zone start for each node
<6>[    0.005822] Early memory node ranges
<6>[    0.005823]   node   0: [mem 0x0000000000001000-0x000000000009efff]
<6>[    0.005823]   node   0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[    0.005824]   node   0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[    0.005824]   node   0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[    0.005826] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[    0.005830] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[    0.005847] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[    0.007873] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[    0.036484] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[    0.036547] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[    0.037014] ACPI: PM-Timer IO Port: 0x1808
<6>[    0.037020] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[    0.037071] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[    0.037072] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[    0.037074] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[    0.037076] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[    0.037077] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[    0.037088] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[    0.037095] TSC deadline timer available
<6>[    0.037096] CPU topo: Max. logical packages:   1
<6>[    0.037097] CPU topo: Max. logical dies:       1
<6>[    0.037097] CPU topo: Max. dies per package:   1
<6>[    0.037098] CPU topo: Max. threads per core:   1
<6>[    0.037099] CPU topo: Num. cores per package:     8
<6>[    0.037099] CPU topo: Num. threads per package:   8
<6>[    0.037099] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[    0.037111] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[    0.037112] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[    0.037113] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[    0.037114] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[    0.037115] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[    0.037115] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[    0.037116] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[    0.037116] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[    0.037117] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[    0.037117] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[    0.037117] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[    0.037117] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[    0.037119] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[    0.037120] Booting paravirtualized kernel on bare hardware
<6>[    0.037122] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[    0.037130] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[    0.037465] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[    0.037470] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[    0.037471] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
<5>[    0.037484] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[    0.037561] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[    0.037574] random: crng init done
<6>[    0.039402] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[    0.040308] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[    0.040363] Fallback order for Node 0: 0 
<6>[    0.040366] Built 1 zonelists, mobility grouping on.  Total pages: 8285792
<6>[    0.040367] Policy zone: Normal
<6>[    0.040375] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[    0.040376] stackdepot: allocating hash table via alloc_large_system_hash
<6>[    0.040378] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[    0.041322] software IO TLB: area num 8.
<4>[    0.086797] **********************************************************
<4>[    0.086798] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.086799] **                                                      **
<4>[    0.086799] ** This system shows unhashed kernel memory addresses   **
<4>[    0.086799] ** via the console, logs, and other interfaces. This    **
<4>[    0.086799] ** might reduce the security of your system.            **
<4>[    0.086799] **                                                      **
<4>[    0.086800] ** If you see this message and you are not debugging    **
<4>[    0.086800] ** the kernel, report this immediately to your system   **
<4>[    0.086800] ** administrator!                                       **
<4>[    0.086800] **                                                      **
<4>[    0.086800] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.086801] **********************************************************
<6>[    0.087877] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[    0.088199] ftrace: allocating 59524 entries in 233 pages
<6>[    0.113605] ftrace: allocated 233 pages with 5 groups
<6>[    0.114806] Dynamic Preempt: voluntary
<6>[    0.115255] Running RCU self tests
<6>[    0.115256] Running RCU synchronous self tests
<6>[    0.115256] rcu: Preemptible hierarchical RCU implementation.
<6>[    0.115256] rcu: 	RCU lockdep checking is enabled.
<6>[    0.115257] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[    0.115258] 	Trampoline variant of Tasks RCU enabled.
<6>[    0.115258] 	Rude variant of Tasks RCU enabled.
<6>[    0.115258] 	Tracing variant of Tasks RCU enabled.
<6>[    0.115258] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[    0.115259] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[    0.115298] Running RCU synchronous self tests
<6>[    0.115301] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115305] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115307] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.125398] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[    0.125850] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[    0.126186] Console: colour dummy device 80x25
<6>[    0.126194] printk: legacy console [tty0] enabled
<6>[    0.127385] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[    0.127393] ... MAX_LOCKDEP_SUBCLASSES:  8
<6>[    0.127396] ... MAX_LOCK_DEPTH:          48
<6>[    0.127400] ... MAX_LOCKDEP_KEYS:        8192
<6>[    0.127403] ... CLASSHASH_SIZE:          4096
<6>[    0.127407] ... MAX_LOCKDEP_ENTRIES:     524288
<6>[    0.127411] ... MAX_LOCKDEP_CHAINS:      524288
<6>[    0.127414] ... CHAINHASH_SIZE:          262144
<6>[    0.127418]  memory used by lock dependency info: 54145 kB
<6>[    0.127422]  memory used for stack traces: 4224 kB
<6>[    0.127426]  per task-struct memory footprint: 1920 bytes
<6>[    0.127477] ACPI: Core revision 20240827
<6>[    0.128380] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[    0.128443] APIC: Switch to symmetric I/O mode setup
<6>[    0.128449] DMAR: Host address width 38
<6>[    0.128453] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[    0.128486] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128515] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[    0.128537] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128563] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[    0.128584] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[    0.128618] DMAR: SATC flags: 0x1
<6>[    0.128628] DMAR-IR: IOAPIC id 2 under DRHD base  0xfc820000 IOMMU 2
<6>[    0.128633] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[    0.128638] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[    0.130693] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[    0.135847] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[    0.135866] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[    0.135938] CPU0: Thermal monitoring enabled (TM1)
<6>[    0.135944] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[    0.136116] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[    0.136120] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[    0.136130] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[    0.136138] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[    0.136143] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[    0.136150] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[    0.136157] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[    0.136172] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[    0.136179] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[    0.136185] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[    0.136191] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[    0.136197] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[    0.136204] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
<6>[    0.136209] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
<6>[    0.136215] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
<6>[    0.136221] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[    0.136860] Freeing SMP alternatives memory: 48K
<6>[    0.136860] pid_max: default: 32768 minimum: 301
<6>[    0.136860] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[    0.136860] landlock: Up and running.
<6>[    0.136860] Yama: becoming mindful.
<6>[    0.136860] AppArmor: AppArmor initialized
<6>[    0.136860] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136860] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136860] Running RCU synchronous self tests
<6>[    0.136860] Running RCU synchronous self tests
<6>[    0.136860] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[    0.136860] Running RCU Tasks wait API self tests
<6>[    0.136860] Running RCU Tasks Rude wait API self tests
<6>[    0.136860] Running RCU Tasks Trace wait API self tests
<6>[    0.136860] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[    0.136860] core: cpu_core PMU driver: 
<6>[    0.136860] ... version:                6
<6>[    0.136860] ... bit width:              48
<6>[    0.136865] ... generic registers:      10
<6>[    0.136869] ... value mask:             0000ffffffffffff
<6>[    0.136874] ... max period:             00007fffffffffff
<6>[    0.136879] ... fixed-purpose events:   4
<6>[    0.136883] ... event mask:             0001000f000003ff
<6>[    0.136914] signal: max sigframe size: 3632
<6>[    0.136937] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[    0.137023] rcu: Hierarchical SRCU implementation.
<6>[    0.137028] rcu: 	Max phase no-delay instances is 400.
<6>[    0.137928] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[    0.139742] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[    0.140010] smp: Bringing up secondary CPUs ...
<6>[    0.140352] smpboot: x86: Booting SMP configuration:
<6>[    0.140359] .... node  #0, CPUs:      #1 #2
<6>[    0.142988] Callback from call_rcu_tasks_trace() invoked.
<4>[    0.145941]  #3 #4 #5 #6 #7
<6>[    0.010825] core: cpu_atom PMU driver: 
<6>[    0.010825] ... version:                6
<6>[    0.010825] ... bit width:              48
<6>[    0.010825] ... generic registers:      8
<6>[    0.010825] ... value mask:             0000ffffffffffff
<6>[    0.010825] ... max period:             00007fffffffffff
<6>[    0.010825] ... fixed-purpose events:   6
<6>[    0.010825] ... event mask:             00000077000000ff
<6>[    0.155023] smp: Brought up 1 node, 8 CPUs
<6>[    0.156102] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[    0.158067] Memory: 32345060K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775236K reserved, 0K cma-reserved)
<6>[    0.159532] devtmpfs: initialized
<6>[    0.159532] x86/mm: Memory block size: 128MB
<6>[    0.175466] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[    0.176310] Running RCU synchronous self tests
<6>[    0.176324] Running RCU synchronous self tests
<6>[    0.176342] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.176342] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[    0.176342] pinctrl core: initialized pinctrl subsystem
<6>[    0.177275] PM: RTC time: 20:25:01, date: 2025-02-27
<6>[    0.178224] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[    0.179147] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[    0.179442] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[    0.179721] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[    0.179787] audit: initializing netlink subsys (disabled)
<5>[    0.179959] audit: type=2000 audit(1740687901.044:1): state=initialized audit_enabled=0 res=1
<6>[    0.180946] thermal_sys: Registered thermal governor 'fair_share'
<6>[    0.180948] thermal_sys: Registered thermal governor 'bang_bang'
<6>[    0.180954] thermal_sys: Registered thermal governor 'step_wise'
<6>[    0.180959] thermal_sys: Registered thermal governor 'user_space'
<6>[    0.180963] thermal_sys: Registered thermal governor 'power_allocator'
<6>[    0.181007] EISA bus registered
<6>[    0.181034] cpuidle: using governor ladder
<6>[    0.181034] cpuidle: using governor menu
<6>[    0.181034] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[    0.181926] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[    0.181953] PCI: Using configuration type 1 for base access
<6>[    0.182101] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[    0.182973] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[    0.182973] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[    0.182973] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[    0.182973] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[    0.201865] raid6: avx2x4   gen() 75884 MB/s
<6>[    0.218864] raid6: avx2x2   gen() 82535 MB/s
<6>[    0.235861] raid6: avx2x1   gen() 75203 MB/s
<6>[    0.235865] raid6: using algorithm avx2x2 gen() 82535 MB/s
<6>[    0.252861] raid6: .... xor() 57376 MB/s, rmw enabled
<6>[    0.252866] raid6: using avx2x2 recovery algorithm
<6>[    0.256149] fbcon: Taking over console
<6>[    0.257421] ACPI: Added _OSI(Module Device)
<6>[    0.257473] ACPI: Added _OSI(Processor Device)
<6>[    0.257518] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.257562] ACPI: Added _OSI(Processor Aggregator Device)
<6>[    0.863182] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[    0.895138] ACPI: EC: EC started
<6>[    0.895160] ACPI: EC: interrupt blocked
<6>[    0.902290] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[    0.902302] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[    1.008273] Callback from call_rcu_tasks() invoked.
<6>[    1.220574] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.220584] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.276240] ACPI: Interpreter enabled
<6>[    1.276343] ACPI: PM: (supports S0 S4 S5)
<6>[    1.276348] ACPI: Using IOAPIC for interrupt routing
<6>[    1.282632] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    1.282640] PCI: Ignoring E820 reservations for host bridge windows
<6>[    1.302092] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[    1.302143] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[    1.403913] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[    1.403913] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[    1.412241] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[    1.799603] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[    1.835318] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[    2.023418] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[    2.025290] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[    2.033791] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[    2.045033] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[    2.045571] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[    2.046108] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[    2.160552] ACPI: \: Can't tag data node
<3>[    2.163281] ACPI: \: Can't tag data node
<3>[    2.166283] ACPI: \: Can't tag data node
<3>[    2.169117] ACPI: \: Can't tag data node
<3>[    2.172097] ACPI: \: Can't tag data node
<6>[    2.353387] ACPI: \_TZ_.FN00: New power resource
<6>[    2.354863] ACPI: \_TZ_.FN01: New power resource
<6>[    2.356268] ACPI: \_TZ_.FN02: New power resource
<6>[    2.357956] ACPI: \_TZ_.FN03: New power resource
<6>[    2.359219] ACPI: \_TZ_.FN04: New power resource
<6>[    2.362953] ACPI: \PIN_: New power resource
<6>[    2.372580] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[    2.372620] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[    2.381699] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[    2.406723] PCI host bridge to bus 0000:00
<6>[    2.406806] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
<6>[    2.406828] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
<6>[    2.406847] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[    2.407188] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[    2.407213] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[    2.407244] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[    2.415483] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[    2.417340] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[    2.417474] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[    2.417494] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[    2.417514] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[    2.417607] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[    2.420004] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[    2.420076] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[    2.423324] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[    2.423393] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[    2.423412] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[    2.425578] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[    2.425658] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.425682] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[    2.425717] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[    2.426372] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[    2.426468] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[    2.438003] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[    2.438088] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.438113] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[    2.438150] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[    2.438366] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[    2.438441] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[    2.449522] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[    2.449604] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.449628] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[    2.449662] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[    2.449869] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[    2.449945] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[    2.461522] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[    2.461589] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[    2.461616] pci 0000:00:0a.0: enabling Extended Tags
<6>[    2.462017] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[    2.462075] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[    2.462091] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[    2.463027] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.463120] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[    2.463249] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[    2.466813] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.466953] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[    2.466970] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[    2.467317] pci 0000:00:0d.2: supports D1 D2
<6>[    2.467326] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.470111] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.470203] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[    2.470219] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[    2.470327] pci 0000:00:0d.3: supports D1 D2
<6>[    2.470336] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.473488] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[    2.473583] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[    2.473702] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[    2.479764] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.479908] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[    2.480076] pci 0000:00:13.0: PME# supported from D3hot
<6>[    2.480943] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.481035] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[    2.481155] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[    2.485671] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[    2.485774] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[    2.485791] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[    2.486316] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.486587] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.496012] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.496292] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.499474] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.499748] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.502916] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.503190] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.506357] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.506503] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[    2.506656] pci 0000:00:16.0: PME# supported from D3hot
<6>[    2.512497] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[    2.512609] pci 0000:00:16.3: BAR 0 [io  0x4020-0x4027]
<6>[    2.512623] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[    2.513139] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[    2.513200] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.513217] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[    2.513232] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[    2.513434] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[    2.513513] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[    2.524408] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[    2.524540] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    2.524591] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[    2.525015] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[    2.525210] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[    2.536850] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[    2.539989] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[    2.540219] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[    2.540252] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[    2.540477] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[    2.541364] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[    2.541534] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[    2.541560] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
<6>[    2.544864] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.545160] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[    2.545636] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[    2.545749] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[    2.545878] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[    2.549658] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[    2.549759] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[    2.549778] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[    2.549796] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[    2.550482] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.550840] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.550840] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.550840] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[    2.550840] pci 0000:7f:00.0: BAR 0 [io  0x3000-0x30ff]
<6>[    2.550840] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[    2.550840] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[    2.550860] pci 0000:7f:00.0: supports D1 D2
<6>[    2.550860] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.552231] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.556590] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.557922] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[    2.558909] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[    2.559871] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.559871] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    3.028871] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[   13.395510] Low-power S0 idle used by default for system suspend
<6>[   13.447538] ACPI: EC: interrupt unblocked
<6>[   13.447548] ACPI: EC: event unblocked
<6>[   13.447583] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[   13.447589] ACPI: EC: GPE=0x6e
<6>[   13.447595] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[   13.447604] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[   13.448341] iommu: Default domain type: Translated
<6>[   13.448341] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[   13.451279] SCSI subsystem initialized
<7>[   13.451622] libata version 3.00 loaded.
<6>[   13.452096] ACPI: bus type USB registered
<6>[   13.452192] usbcore: registered new interface driver usbfs
<6>[   13.452233] usbcore: registered new interface driver hub
<6>[   13.452284] usbcore: registered new device driver usb
<6>[   13.452420] pps_core: LinuxPPS API ver. 1 registered
<6>[   13.452424] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[   13.452446] PTP clock support registered
<6>[   13.453954] EDAC MC: Ver: 3.0.0
<6>[   13.459191] efivars: Registered efivars operations
<6>[   13.462235] NetLabel: Initializing
<6>[   13.462247] NetLabel:  domain hash size = 128
<6>[   13.462258] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
<6>[   13.462419] NetLabel:  unlabeled traffic allowed by default
<6>[   13.462455] mctp: management component transport protocol core
<6>[   13.462468] NET: Registered PF_MCTP protocol family
<6>[   13.462546] PCI: Using ACPI for IRQ routing
<7>[   13.512192] PCI: pci_cache_line_size set to 64 bytes
<6>[   13.512512] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[   13.512705] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[   13.512726] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[   13.512733] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[   13.512739] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[   13.512746] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[   13.513921] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[   13.513943] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[   13.513954] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[   13.513987] vgaarb: loaded
<6>[   13.515960] clocksource: Switched to clocksource tsc-early
<5>[   13.527861] VFS: Disk quotas dquot_6.6.0
<6>[   13.527898] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[   13.529161] AppArmor: AppArmor Filesystem Enabled
<6>[   13.529382] pnp: PnP ACPI init
<6>[   13.530465] system 00:00: [io  0x0680-0x069f] has been reserved
<6>[   13.530478] system 00:00: [io  0x164e-0x164f] has been reserved
<6>[   13.531795] system 00:02: [io  0x06a4] has been reserved
<6>[   13.531803] system 00:02: [io  0x06a0] has been reserved
<6>[   13.550710] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[   13.550721] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[   13.550732] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[   13.550740] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[   13.550748] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[   13.550757] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[   13.550766] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[   13.550774] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[   13.553459] system 00:04: [io  0x2000-0x20fe] has been reserved
<6>[   13.556154] system 00:06: [io  0x1854-0x1857] has been reserved
<6>[   13.556297] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[   13.560539] pnp: PnP ACPI: found 8 devices
<6>[   13.593636] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[   13.594215] NET: Registered PF_INET protocol family
<6>[   13.594510] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   13.600054] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[   13.600490] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[   13.600908] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   13.602268] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[   13.605402] TCP: Hash tables configured (established 262144 bind 65536)
<6>[   13.606242] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   13.607849] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   13.609523] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[   13.609671] pci 0000:00:07.0: bridge window [io  0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[   13.609698] pci 0000:00:07.1: bridge window [io  0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[   13.609720] pci 0000:00:07.2: bridge window [io  0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[   13.609814] pci 0000:00:07.0: bridge window [io  0x5000-0x5fff]: assigned
<6>[   13.609842] pci 0000:00:07.1: bridge window [io  0x6000-0x6fff]: assigned
<6>[   13.609858] pci 0000:00:07.2: bridge window [io  0x7000-0x7fff]: assigned
<6>[   13.609874] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[   13.609995] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[   13.610081] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[   13.610167] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[   13.610254] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[   13.610326] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[   13.610346] pci 0000:00:07.0:   bridge window [io  0x5000-0x5fff]
<6>[   13.610367] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[   13.610385] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   13.610412] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[   13.610426] pci 0000:00:07.1:   bridge window [io  0x6000-0x6fff]
<6>[   13.610445] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[   13.610464] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   13.610490] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[   13.610504] pci 0000:00:07.2:   bridge window [io  0x7000-0x7fff]
<6>[   13.610524] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[   13.610543] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   13.610576] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[   13.610590] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[   13.610608] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[   13.610635] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[   13.610681] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[   13.610742] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
<6>[   13.610757] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
<6>[   13.610770] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[   13.610785] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[   13.610799] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[   13.610815] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
<6>[   13.610833] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[   13.610846] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   13.610862] pci_bus 0000:2b: resource 0 [io  0x6000-0x6fff]
<6>[   13.610874] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[   13.610888] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   13.610903] pci_bus 0000:55: resource 0 [io  0x7000-0x7fff]
<6>[   13.610915] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[   13.610928] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   13.610944] pci_bus 0000:7f: resource 0 [io  0x3000-0x3fff]
<6>[   13.610956] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[   13.610970] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[   13.613297] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[   13.616719] PCI: CLS 0 bytes, default 64
<6>[   13.616940] DMAR: No RMRR found
<6>[   13.616975] DMAR: No ATSR found
<6>[   13.616987] DMAR: dmar1: Using Queued invalidation
<6>[   13.617044] DMAR: dmar0: Using Queued invalidation
<6>[   13.617062] DMAR: dmar2: Using Queued invalidation
<6>[   13.618999] pci 0000:00:04.0: Adding to iommu group 0
<6>[   13.619168] pci 0000:00:05.0: Adding to iommu group 1
<6>[   13.619325] pci 0000:00:0a.0: Adding to iommu group 2
<6>[   13.619459] pci 0000:00:0b.0: Adding to iommu group 3
<6>[   13.627165] pci 0000:00:02.0: Adding to iommu group 4
<6>[   13.630084] pci 0000:00:00.0: Adding to iommu group 5
<6>[   13.630234] pci 0000:00:07.0: Adding to iommu group 6
<6>[   13.630379] pci 0000:00:07.1: Adding to iommu group 7
<6>[   13.630521] pci 0000:00:07.2: Adding to iommu group 8
<6>[   13.630720] pci 0000:00:0d.0: Adding to iommu group 9
<6>[   13.630812] pci 0000:00:0d.2: Adding to iommu group 9
<6>[   13.630923] pci 0000:00:0d.3: Adding to iommu group 9
<6>[   13.631077] pci 0000:00:12.0: Adding to iommu group 10
<6>[   13.631224] pci 0000:00:13.0: Adding to iommu group 11
<6>[   13.631391] pci 0000:00:14.0: Adding to iommu group 12
<6>[   13.631489] pci 0000:00:14.2: Adding to iommu group 12
<6>[   13.631708] pci 0000:00:15.0: Adding to iommu group 13
<6>[   13.631813] pci 0000:00:15.1: Adding to iommu group 13
<6>[   13.631955] pci 0000:00:15.2: Adding to iommu group 13
<6>[   13.632063] pci 0000:00:15.3: Adding to iommu group 13
<6>[   13.632248] pci 0000:00:16.0: Adding to iommu group 14
<6>[   13.632357] pci 0000:00:16.3: Adding to iommu group 14
<6>[   13.632503] pci 0000:00:1c.0: Adding to iommu group 15
<6>[   13.632665] pci 0000:00:1c.4: Adding to iommu group 16
<6>[   13.632929] pci 0000:00:1f.0: Adding to iommu group 17
<6>[   13.633032] pci 0000:00:1f.3: Adding to iommu group 17
<6>[   13.633142] pci 0000:00:1f.4: Adding to iommu group 17
<6>[   13.633244] pci 0000:00:1f.5: Adding to iommu group 17
<6>[   13.633352] pci 0000:00:1f.6: Adding to iommu group 17
<6>[   13.633454] pci 0000:00:1f.7: Adding to iommu group 17
<6>[   13.633591] pci 0000:7f:00.0: Adding to iommu group 18
<6>[   13.633745] pci 0000:80:00.0: Adding to iommu group 19
<6>[   13.654469] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[   13.654494] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[   13.654503] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[   13.660510] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[   13.660582] clocksource: Switched to clocksource tsc
<6>[   13.660794] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[   13.666553] Initialise system trusted keyrings
<5>[   13.666657] Key type blacklist registered
<6>[   13.666926] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[   13.676847] zbud: loaded
<6>[   13.678332] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[   13.678468] ntfs3: Enabled Linux POSIX ACLs support
<6>[   13.678475] ntfs3: Read-only LZX/Xpress compression included
<5>[   13.679006] integrity: Platform Keyring initialized
<5>[   13.679034] integrity: Machine keyring initialized
<6>[   13.685426] xor: automatically using best checksumming function   avx       
<5>[   13.685438] Key type asymmetric registered
<5>[   13.685452] Asymmetric key parser 'x509' registered
<6>[   13.685594] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[   13.685945] io scheduler mq-deadline registered
<6>[   13.687041] ledtrig-cpu: registered to indicate activity on CPUs
<6>[   13.688865] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[   13.689276] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[   13.690509] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[   13.690854] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[   13.692065] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[   13.692406] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[   13.693508] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[   13.693803] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[   13.695363] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[   13.695731] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[   13.696357] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[   13.699387] Monitor-Mwait will be used to enter C-1 state
<7>[   13.699530] Monitor-Mwait will be used to enter C-2 state
<7>[   13.699584] Monitor-Mwait will be used to enter C-3 state
<6>[   13.705507] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[   13.705722] ACPI: button: Lid Switch [LID0]
<6>[   13.705985] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[   13.706159] ACPI: button: Sleep Button [SLPB]
<6>[   13.706364] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[   13.706779] ACPI: button: Power Button [PWRB]
<4>[   13.718322] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.725633] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.734261] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.742564] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.750645] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.758190] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.765862] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.773201] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[   13.878878] thermal LNXTHERM:00: registered as thermal_zone0
<6>[   13.878896] ACPI: thermal: Thermal Zone [TZ00] (69 C)
<6>[   13.880158] ACPI: battery: Slot [BAT1] (battery absent)
<6>[   13.880484] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[   13.881660] ACPI: battery: Slot [BAT0] (battery present)
<6>[   13.903938] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[   13.917764] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[   13.919579] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[   13.942708] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[   13.945134] hpet_acpi_add: no address or irqs in _CRS
<6>[   13.945395] Linux agpgart interface v0.103
<6>[   13.946232] ACPI: bus type drm_connector registered
<6>[   13.966861] loop: module loaded
<6>[   14.009905] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[   14.189903] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[   14.324935] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[   14.453966] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[   14.570903] Key type psk registered
<6>[   14.572743] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[   14.573469] nvme nvme0: pci function 0000:80:00.0
<6>[   14.573616] tun: Universal TUN/TAP device driver, 1.6
<6>[   14.574367] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   14.574464] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[   14.576334] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   14.578109] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   14.578141] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[   14.578162] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   14.578529] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   14.578550] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.578560] usb usb1: Product: xHCI Host Controller
<6>[   14.578568] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   14.578577] usb usb1: SerialNumber: 0000:00:0d.0
<6>[   14.579522] hub 1-0:1.0: USB hub found
<6>[   14.579595] hub 1-0:1.0: 1 port detected
<6>[   14.583949] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   14.583967] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.583978] usb usb2: Product: xHCI Host Controller
<6>[   14.583986] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   14.583994] usb usb2: SerialNumber: 0000:00:0d.0
<6>[   14.584642] hub 2-0:1.0: USB hub found
<6>[   14.584689] hub 2-0:1.0: 3 ports detected
<6>[   14.610699] nvme nvme0: 8/0/0 default/read/poll queues
<6>[   14.620775]  nvme0n1: p1 p2
<6>[   14.652047] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   14.652107] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[   14.654284] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   14.656419] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   14.656446] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[   14.656470] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   14.656736] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   14.656751] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.656761] usb usb3: Product: xHCI Host Controller
<6>[   14.656768] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   14.656777] usb usb3: SerialNumber: 0000:00:14.0
<6>[   14.657512] hub 3-0:1.0: USB hub found
<6>[   14.657567] hub 3-0:1.0: 8 ports detected
<6>[   14.686865] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   14.686883] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.686894] usb usb4: Product: xHCI Host Controller
<6>[   14.686901] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   14.686910] usb usb4: SerialNumber: 0000:00:14.0
<6>[   14.687531] hub 4-0:1.0: USB hub found
<6>[   14.687576] hub 4-0:1.0: 2 ports detected
<6>[   14.695615] usbcore: registered new interface driver usb-storage
<6>[   14.695749] usbcore: registered new interface driver usbserial_generic
<6>[   14.695837] usbserial: USB Serial support registered for generic
<6>[   14.695889] usbcore: registered new interface driver ftdi_sio
<6>[   14.695922] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[   14.695973] usbcore: registered new interface driver pl2303
<6>[   14.696005] usbserial: USB Serial support registered for pl2303
<6>[   14.696127] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[   14.696138] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[   15.405207] i8042: Can't read CTR while initializing i8042
<3>[   15.405224] i8042 i8042: probe with driver i8042 failed with error -5
<6>[   15.405679] mousedev: PS/2 mouse device common for all mice
<6>[   15.406566] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[   15.408352] rtc_cmos rtc_cmos: registered as rtc0
<6>[   15.408567] rtc_cmos rtc_cmos: setting system clock to 2025-02-27T20:25:17 UTC (1740687917)
<6>[   15.408733] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[   15.408784] i2c_dev: i2c /dev entries driver
<6>[   15.413043] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[   15.413058] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[   15.413068] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[   15.413114] device-mapper: uevent: version 1.0.3
<6>[   15.413468] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[   15.413597] platform eisa.0: Probing EISA bus 0
<4>[   15.413610] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[   15.413625] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[   15.413637] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[   15.413649] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[   15.413660] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[   15.413672] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[   15.413683] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[   15.413694] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[   15.413706] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[   15.413715] platform eisa.0: EISA: Detected 0 cards
<6>[   15.413725] intel_pstate: Intel P-state driver initializing
<6>[   15.417744] Hybrid CPU capacity scaling enabled
<6>[   15.419393] intel_pstate: HWP enabled
<6>[   15.419402] sdhci: Secure Digital Host Controller Interface driver
<6>[   15.419410] sdhci: Copyright(c) Pierre Ossman
<6>[   15.419555] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[   15.422153] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[   15.423172] drop_monitor: Initializing network drop monitor service
<6>[   15.423444] NET: Registered PF_INET6 protocol family
<6>[   15.426433] Segment Routing with IPv6
<6>[   15.426489] In-situ OAM (IOAM) with IPv6
<6>[   15.426543] NET: Registered PF_PACKET protocol family
<5>[   15.426729] Key type dns_resolver registered
<4>[   15.430020] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[   15.430242] microcode: Current revision: 0x0000011b
<6>[   15.430742] IPI shorthand broadcast: enabled
<6>[   15.440963] sched_clock: Marking stable (15431001188, 9825521)->(15534565597, -93738888)
<6>[   15.441696] registered taskstats version 1
<5>[   15.443146] Loading compiled-in X.509 certificates
<6>[   15.474675] Demotion targets for Node 0: null
<6>[   15.474912] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[   15.474915] kmemleak: Automatic memory scanning thread started
<5>[   15.475122] Key type .fscrypt registered
<5>[   15.475128] Key type fscrypt-provisioning registered
<6>[   15.477680] Btrfs loaded, zoned=yes, fsverity=yes
<5>[   15.479521] Key type encrypted registered
<6>[   15.479532] AppArmor: AppArmor sha256 policy hashing enabled
<6>[   15.479606] ima: No TPM chip found, activating TPM-bypass!
<5>[   15.479623] Loading compiled-in module X.509 certificates
<5>[   15.480425] Loaded X.509 cert 'Build time autogenerated kernel key: 1e13e8e3435463a0eb2fa8b3830dc7977db5395e'
<6>[   15.480439] ima: Allocated hash algorithm: sha256
<6>[   15.480482] ima: No architecture policies found
<6>[   15.480577] evm: Initialising EVM extended attributes:
<6>[   15.480582] evm: security.selinux
<6>[   15.480585] evm: security.SMACK64
<6>[   15.480588] evm: security.SMACK64EXEC
<6>[   15.480591] evm: security.SMACK64TRANSMUTE
<6>[   15.480595] evm: security.SMACK64MMAP
<6>[   15.480598] evm: security.apparmor
<6>[   15.480601] evm: security.ima
<6>[   15.480604] evm: security.capability
<6>[   15.480607] evm: HMAC attrs: 0x1
<6>[   15.482654] PM:   Magic number: 13:501:448
<6>[   15.482872] printk: legacy console [netcon0] enabled
<6>[   15.482881] netconsole: network logging started
<6>[   15.483406] RAS: Correctable Errors collector initialized.
<6>[   15.483583] clk: Disabling unused clocks
<6>[   15.483593] PM: genpd: Disabling unused power domains
<6>[   15.484654] md: Waiting for all devices to be available before autodetect
<6>[   15.484660] md: If you don't use raid, use raid=noautodetect
<6>[   15.484665] md: Autodetecting RAID arrays.
<6>[   15.484674] md: autorun ...
<6>[   15.484677] md: ... autorun DONE.
<6>[   15.535309] EXT4-fs (nvme0n1p2): mounted filesystem 7dfac1f5-10ea-4066-a63e-e14654e0601e ro with ordered data mode. Quota mode: none.
<6>[   15.535383] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[   15.536592] devtmpfs: mounted
<6>[   15.547376] Freeing unused decrypted memory: 2028K
<6>[   15.548285] Freeing unused kernel image (initmem) memory: 5632K
<6>[   15.548309] Write protecting the kernel read-only data: 34816k
<6>[   15.548719] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[   15.549025] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[   15.554078] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[   15.554731] Run /sbin/init as init process
<7>[   15.554736]   with arguments:
<7>[   15.554738]     /sbin/init
<7>[   15.554739]   with environment:
<7>[   15.554740]     HOME=/
<7>[   15.554741]     TERM=linux
<7>[   15.554742]     BOOT_IMAGE=/boot/drm_intel
<7>[   15.602330] systemd[1]: Inserted module 'autofs4'
<7>[   15.621120] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[   15.621163] systemd[1]: Detected architecture x86-64.
<7>[   15.622567] systemd[1]: Hostname set to <shard-lnl-7>.
<7>[   15.861281] systemd[1]: Queued start job for default target graphical.target.
<7>[   15.887855] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[   15.889764] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[   15.891151] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[   15.891385] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[   15.892031] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[   15.892144] systemd[1]: Expecting device dev-disk-by\x2duuid-BB9D\x2d0E2E.device - /dev/disk/by-uuid/BB9D-0E2E...
<7>[   15.892225] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[   15.892304] systemd[1]: Reached target slices.target - Slice Units.
<7>[   15.892366] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[   15.892433] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[   15.892501] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[   15.892744] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[   15.893120] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[   15.893383] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[   15.893684] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[   15.893932] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[   15.894132] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[   15.894398] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[   15.894696] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[   15.894970] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[   15.895154] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.895566] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[   15.895832] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[   15.898825] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[   15.901340] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[   15.903915] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[   15.906397] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[   15.911839] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[   15.915597] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[   15.918569] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[   15.922759] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[   15.925992] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[   15.928855] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[   15.931700] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[   15.934753] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[   15.939556] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[   15.943517] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[   15.947934] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[   15.948150] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[   15.948980] systemd-journald[211]: Collecting audit messages is disabled.
<7>[   15.953543] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[   15.960554] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[   15.960661] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.960740] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[   15.963314] pstore: Using crash dump compression: deflate
<7>[   15.967438] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[   15.967606] pstore: Registered efi_pstore as persistent store backend
<6>[   15.969755] fuse: init (API version 7.42)
<7>[   15.974085] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[   16.108238] EXT4-fs (nvme0n1p2): re-mounted 7dfac1f5-10ea-4066-a63e-e14654e0601e r/w. Quota mode: none.
<6>[   16.140692] Adding 8388604k swap on /swap.img.  Priority:-2 extents:66 across:320602112k SS
<7>[   16.159027] systemd-journald[211]: Received client request to flush runtime journal.
<7>[   16.175920] systemd-journald[211]: /var/log/journal/d99f231fc73949389b52e126c183b290/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[   16.175936] systemd-journald[211]: Rotating system journal.
<4>[   16.849106] nvme nvme0: using unchecked data buffer
<4>[   16.968042] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968066] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968091] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968115] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968140] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968165] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968191] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968214] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968238] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968263] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968288] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968312] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968337] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968362] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968386] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968411] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968435] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968473] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968496] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968521] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968545] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968570] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968595] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968620] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968644] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968680] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968704] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968776] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968799] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968824] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968929] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968947] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.968995] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.969019] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.969044] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.969068] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.969093] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.969118] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.983301] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[   17.001535] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.001559] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.001583] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.001608] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.001633] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.001657] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.001693] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.001718] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.001941] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002012] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002047] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002094] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002223] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002247] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002271] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002308] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002344] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002368] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002392] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002417] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002442] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002466] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002492] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002516] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002541] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002566] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002590] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002614] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002639] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.002664] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029365] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029389] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029409] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029429] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029449] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029469] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029489] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029595] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029616] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029628] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029641] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029653] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029666] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029678] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029691] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029703] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029723] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029735] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029768] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029788] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029801] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029813] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029894] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029914] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029934] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.029990] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030010] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030030] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030050] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030082] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030102] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030122] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030142] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030162] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030182] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030201] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030222] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030241] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.030261] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   17.033173] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[   17.042747] intel-hid INTC107B:00: platform supports 5 button array
<4>[   17.050940] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.050965] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   17.054468] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[   17.078355] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078382] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078401] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078421] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078441] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078461] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078481] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078501] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078521] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078558] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078578] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078605] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078625] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078649] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078669] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078689] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078708] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078744] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078776] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078796] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078816] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078923] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078942] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078962] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078973] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.078993] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079010] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079023] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079035] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079062] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079082] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079095] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079115] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079127] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079140] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079152] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079165] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079177] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079190] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079209] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079229] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079244] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079269] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079281] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.079294] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   17.097795] pci 0000:00:05.0: Setting to D3hot
<6>[   17.109930] pci 0000:00:0b.0: Setting to D3hot
<4>[   17.122230] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[   17.122516] intel_pmc_core INT33A1:00:  initialized
<3>[   17.132142] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[   17.213389] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<5>[   17.230498] audit: type=1400 audit(1740687919.320:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=437 comm="apparmor_parser"
<5>[   17.231568] audit: type=1400 audit(1740687919.321:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=440 comm="apparmor_parser"
<5>[   17.235376] audit: type=1400 audit(1740687919.325:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=441 comm="apparmor_parser"
<5>[   17.235821] audit: type=1400 audit(1740687919.325:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=438 comm="apparmor_parser"
<5>[   17.236602] audit: type=1400 audit(1740687919.326:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=442 comm="apparmor_parser"
<5>[   17.237124] audit: type=1400 audit(1740687919.326:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=443 comm="apparmor_parser"
<5>[   17.237332] audit: type=1400 audit(1740687919.327:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=445 comm="apparmor_parser"
<5>[   17.240536] audit: type=1400 audit(1740687919.330:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=446 comm="apparmor_parser"
<5>[   17.246843] audit: type=1400 audit(1740687919.336:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=447 comm="apparmor_parser"
<5>[   17.252331] audit: type=1400 audit(1740687919.342:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chrome" pid=450 comm="apparmor_parser"
<6>[   17.457548] ACPI: bus type thunderbolt registered
<6>[   17.488148] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[   17.488572] intel_rapl_common: Found RAPL domain package
<6>[   17.488585] intel_rapl_common: Found RAPL domain dram
<6>[   17.489296] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[   17.508452] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[   17.508458] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[   17.526045] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[   17.529983] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[   17.559010] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[   17.570525] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[   17.587391] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[   17.595141] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[   17.611071] e1000e: Intel(R) PRO/1000 Network Driver
<6>[   17.611076] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[   17.612305] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[   17.612327] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[   17.615069] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[   17.728448] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[   17.728453] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[   17.728455] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[   17.728456] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[   17.728457] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[   17.752204] cryptd: max_cpu_qlen set to 1000
<6>[   17.789083] AES CTR mode by8 optimization enabled
<6>[   17.809596] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a5:0e:fc, XID 541, IRQ 188
<6>[   17.809602] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<4>[   17.970214] block nvme0n1: No UUID available providing old NGUID
<6>[   18.217602] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[   18.223187] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[   18.248072] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[   18.248081] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[   18.248083] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[   18.302296] evm: overlay not supported
<6>[   18.507078] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:30:95
<6>[   18.507083] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[   18.507214] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[   18.561673] loop0: detected capacity change from 0 to 8
<6>[   18.591662] intel_rapl_common: Found RAPL domain package
<6>[   18.592067] intel_rapl_common: Found RAPL domain core
<6>[   18.592071] intel_rapl_common: Found RAPL domain dram
<6>[   18.592073] intel_rapl_common: Found RAPL domain psys
<6>[   18.740582] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[   18.753739] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<4>[   18.818582] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[   18.847873] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[   18.847889] 0x000000000000-0x000002000000 : "BIOS"
<6>[   18.884974] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[   19.032855] Consider using thermal netlink events interface
<6>[   19.042175] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[   19.255181] hid: raw HID events driver (C) Jiri Kosina
<6>[   19.261870] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[   19.296734] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.298003] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.299338] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.300046] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.301226] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.301824] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.306013] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.308493] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.310977] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.312752] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.315299] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.316971] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   20.014410] typec port0: bound usb3-port1 (ops connector_ops)
<6>[   20.014433] typec port0: bound usb2-port1 (ops connector_ops)
<6>[   21.046736] typec port1: bound usb3-port2 (ops connector_ops)
<6>[   21.046765] typec port1: bound usb2-port2 (ops connector_ops)
<6>[   23.987537] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[   28.659690] systemd-journald[211]: /var/log/journal/d99f231fc73949389b52e126c183b290/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[   51.701414] [IGT] xe_module_load: executing
<7>[   51.713210] [IGT] xe_module_load: starting subtest load
<5>[   51.901343] Setting dangerous option force_probe - tainting kernel
<6>[   51.904155] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[   51.905722] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[   51.905733] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE  64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[   51.905839] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[   51.905939] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[   51.914083] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[   51.918090] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[   51.918201] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[   51.918284] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[   51.918363] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   51.918435] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[   51.918497] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   51.918557] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   51.918615] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   51.918672] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   51.918728] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   51.918782] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   51.918843] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   51.918897] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   51.918950] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   51.919003] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   51.919101] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[   51.920216] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000066 [0x33/00]
<7>[   51.920302] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   51.929879] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   51.931005] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   51.931125] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[   51.931268] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[   51.931392] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,0000007f
<7>[   51.931509] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     000000ff
<7>[   51.931609] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   51.931704] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,000000ff
<6>[   51.932418] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[   51.936463] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[   51.936584] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   51.936682] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[   51.936771] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   51.936862] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[   51.936937] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   51.937012] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   51.937084] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   51.937155] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   51.937226] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   51.937294] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   51.937364] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   51.937434] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   51.937503] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[   51.939141] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[   51.943753] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[   51.945128] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[   51.945327] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   51.945577] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[   51.947559] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   51.947783] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   51.967885] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   51.968337] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   51.968526] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[   51.968716] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[   51.968919] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,00000000
<7>[   51.969090] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     00000000
<7>[   51.969256] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   51.969413] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,0000000f
<7>[   51.970165] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[   51.970481] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[   51.970766] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[   51.971107] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[   51.971391] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[   51.971632] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[   51.971880] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[   51.972171] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[   51.972460] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[   51.972733] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[   51.973031] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[   51.973294] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[   51.973551] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[   51.973821] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[   51.974121] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[   51.974430] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[   51.974667] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[   51.974913] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[   51.975187] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.975407] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.975637] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[   51.975877] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.976165] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.976394] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.976622] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[   51.976854] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.977096] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.977303] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.977510] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[   51.977718] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.977933] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.978142] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.978326] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[   51.978511] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.978701] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.978887] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.979082] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[   51.979250] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.979406] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.979556] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.979715] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[   51.980389] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[   51.980664] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE      ", BDB version 260
<7>[   51.980880] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[   51.981072] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[   51.981252] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[   51.981432] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[   51.981616] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[   51.981793] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[   51.981987] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[   51.982195] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[   51.982395] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[   51.982577] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[   51.982763] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[   51.982977] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[   51.983169] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[   51.983348] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[   51.983528] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[   51.983707] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[   51.983898] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[   51.984089] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   51.984275] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   51.984458] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   51.984641] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[   51.984822] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[   51.985012] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   51.985191] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   51.985369] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   51.985559] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[   51.985820] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   51.986150] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[   51.986424] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   51.986737] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[   51.987047] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[   51.987329] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[   51.987549] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   51.987767] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   51.988031] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[   51.988260] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[   51.988303] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[   51.988566] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[   51.988771] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[   51.988983] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[   51.989821] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[   51.990126] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[   51.991532] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[   51.991785] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[   51.991994] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[   51.992165] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[   51.992314] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[   51.992458] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[   51.992598] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[   51.992735] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[   51.994970] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[   51.995146] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x8f074 = 0x86fc0
<7>[   51.995285] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[   51.995410] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[   51.995526] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[   51.995638] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[   51.995761] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[   51.995883] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f074 = 0x97fc0
<7>[   51.995991] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   51.996095] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[   51.996196] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   51.996294] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[   51.996388] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   51.996483] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[   51.996586] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[   51.996677] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f474 = 0x9ffc0
<7>[   51.996768] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   51.996865] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[   51.996961] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   51.997050] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[   51.997137] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   51.997224] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[   51.997318] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[   51.997409] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f874 = 0x547c0
<7>[   51.997496] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   51.997582] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[   51.997668] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   51.997755] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[   51.997859] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   51.997951] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[   52.002847] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[   52.008093] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   52.008378] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[   52.008614] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<6>[   52.008900] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[   52.009138] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[   52.009433] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[   52.009811] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[   52.010141] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[   52.010362] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[   52.010586] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[   52.010791] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[   52.010999] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[   52.011191] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[   52.011378] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[   52.011564] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[   52.011797] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[   52.012062] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   52.012282] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   52.012489] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   52.012689] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   52.013305] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   52.013539] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   52.013860] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   52.015696] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   52.015992] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[   52.019176] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   52.019890] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID  HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[   52.021107] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[   52.022804] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[   52.023571] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[   52.025962] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   52.036778] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   52.036794] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.036797] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.036799] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   52.036803] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.036806] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   52.036813] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.036815] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   52.036819] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.036886] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.036889] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.036891] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.036903] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.037543] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[   52.038191] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[   52.038388] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[   52.038616] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[   52.038800] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[   52.038979] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   52.039090] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   52.039198] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   52.039305] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   52.039409] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   52.039543] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   52.039768] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[   52.039965] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   52.040113] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[   52.040491] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[   52.040621] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   52.040728] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[   52.040969] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[   52.041109] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   52.041228] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[   52.041663] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[   52.041787] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[   52.041923] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[   52.042026] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[   52.042127] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[   52.042220] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[   52.042293] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[   52.042364] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[   52.042433] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[   52.042501] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[   52.042569] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[   52.042635] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[   52.042701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[   52.042767] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[   52.042838] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[   52.042917] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[   52.043000] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[   52.043081] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[   52.043161] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[   52.043229] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[   52.043291] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[   52.044053] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[   52.044177] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[   52.044256] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[   52.044333] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[   52.044404] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[   52.044470] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[   52.044536] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[   52.044604] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[   52.044674] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[   52.044738] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[   52.044801] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[   52.044880] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[   52.044963] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[   52.045052] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[   52.045132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[   52.045197] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[   52.045257] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[   52.045341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[   52.045411] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[   52.045479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[   52.045547] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[   52.045725] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[   52.045799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[   52.045886] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[   52.045970] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[   52.046047] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[   52.046123] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[   52.046188] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[   52.046276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[   52.046337] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[   52.046394] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[   52.046450] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[   52.046505] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[   52.046563] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[   52.046623] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[   52.046711] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[   52.046776] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[   52.046843] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[   52.046916] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[   52.046992] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[   52.047067] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[   52.047139] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[   52.047257] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[   52.047345] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[   52.047524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[   52.047623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   52.047719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[   52.047804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   52.047909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   52.048013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   52.048113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   52.048212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[   52.048295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   52.048370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   52.048444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   52.048514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[   52.048584] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   52.048654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[   52.048724] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   52.048793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[   52.048877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[   52.048971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[   52.049063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   52.049156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   52.049230] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.049300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   52.049371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.049444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   52.049513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   52.049582] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   52.049650] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   52.049717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   52.049783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[   52.049860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[   52.049941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   52.050025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.050106] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.050182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.050243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.050302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.050360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.050418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.050477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.050541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.050605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.050670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[   52.050735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[   52.050955] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[   52.051057] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   52.051154] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   52.051415] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[   52.051492] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[   52.073017] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[   52.135951] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[   52.283873] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[   52.283878] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[   52.283879] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[   52.283961] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[   52.284068] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   52.284160] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   52.284243] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   52.284341] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[   52.284437] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[   52.284526] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[   52.284593] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   52.284656] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   52.284717] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   52.285742] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[   52.285812] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[   52.285900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[   52.285983] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[   52.286060] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[   52.286135] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[   52.286202] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[   52.286266] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[   52.286329] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[   52.286391] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[   52.286453] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[   52.286514] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[   52.286575] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[   52.286635] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[   52.286694] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[   52.286754] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[   52.286813] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[   52.286884] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[   52.286950] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[   52.287014] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[   52.287076] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[   52.287137] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[   52.287198] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[   52.287250] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[   52.287301] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[   52.287351] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[   52.287410] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[   52.287470] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[   52.287530] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[   52.287587] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[   52.287643] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[   52.287703] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[   52.287766] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[   52.287825] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[   52.287900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[   52.287964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[   52.288036] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[   52.288108] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[   52.288426] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[   52.288481] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[   52.288535] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[   52.288710] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[   52.288761] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[   52.288810] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[   52.289221] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[   52.289280] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[   52.289334] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[   52.289386] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[   52.289436] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[   52.289485] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[   52.289808] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[   52.289894] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[   52.289965] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[   52.290034] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   52.290102] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[   52.290171] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   52.290228] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   52.290282] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   52.290334] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   52.290385] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   52.290434] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   52.290484] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   52.290532] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   52.290579] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   52.290648] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[   52.290791] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[   52.293435] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[   52.306803] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[   52.307646] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   52.307717] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   52.317132] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   52.317474] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   52.318263] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[   52.318339] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[   52.318410] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[   52.318477] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[   52.318545] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[   52.318610] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[   52.318674] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[   52.318735] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[   52.318803] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[   52.321545] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[   52.321613] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[   52.321673] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[   52.323496] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[   52.326508] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[   52.326512] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[   52.326513] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[   52.326513] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[   52.326514] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[   52.326515] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[   52.326516] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[   52.326517] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[   52.326518] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[   52.326518] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[   52.326542] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[   52.326669] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[   52.326773] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[   52.327489] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[   52.327571] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[   52.327650] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[   52.327726] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[   52.327796] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[   52.327885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[   52.327974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[   52.328061] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[   52.328148] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[   52.328222] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[   52.328286] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[   52.328350] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[   52.328411] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[   52.328472] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[   52.328532] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[   52.328591] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[   52.328652] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[   52.328712] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[   52.328771] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[   52.328833] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[   52.328901] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[   52.328974] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[   52.329045] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[   52.329116] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[   52.329176] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[   52.329233] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[   52.329303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[   52.329856] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[   52.329953] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[   52.330371] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[   52.330457] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[   52.331004] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[   52.331089] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   52.331159] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[   52.331217] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   52.331274] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[   52.331329] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   52.331385] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   52.331440] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   52.331494] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   52.331547] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   52.331601] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   52.331653] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   52.331704] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   52.331754] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[   52.331818] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[   52.331935] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[   52.347992] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[   52.349146] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   52.349280] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7>[   52.349341] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   52.369316] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   52.369702] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   52.371077] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   52.373827] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   52.376332] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   52.418890] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[   52.421611] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[   52.422002] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[   52.422400] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb (   0 - 2048) -> (   0 -    0), size 2048 ->    0
<7>[   52.422749] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb (   0 -    0) -> (4054 - 4096), size    0 ->   42
<7>[   52.423065] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   52.423459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   52.423780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.424132] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.424508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   52.426095] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[   52.426460] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[   52.426723] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[   52.439292] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[   52.450990] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[   52.456990] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[   52.457938] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[   52.461338] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[   52.461485] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[   52.462243] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[   52.463594] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[   52.463656] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[   52.464256] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[   52.465220] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[   52.465273] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[   52.465792] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[   52.466478] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[   52.466515] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[   52.466555] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[   52.474357] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
<6>[   52.476800] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[   52.477862] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[   52.477973] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[   52.478972] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[   52.479082] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[   52.479181] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[   52.479264] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[   52.479438] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   52.479629] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   52.479642] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   52.480466] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   52.481262] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   52.481422] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   52.481543] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   52.481867] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   52.481876] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.481878] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.481880] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   52.481883] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.481885] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   52.481892] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.481894] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   52.481897] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.481936] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   52.482046] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   52.482731] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   52.482847] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   52.484057] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[   52.484394] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.484398] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.484400] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.484449] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   52.484461] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.484472] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   52.484482] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   52.484659] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.484792] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[   52.484805] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   52.484814] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   52.484822] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   52.485005] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.485121] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[   52.485131] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   52.485139] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   52.485147] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   52.485273] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.485387] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[   52.485397] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   52.485405] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   52.485411] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   52.485414] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   52.485417] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   52.485567] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   52.485589] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[   52.485593] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[   52.485596] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[   52.485599] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[   52.485616] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   52.485670] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[   52.485788] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[   52.485785] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   52.486103] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[   52.486166] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   52.486307] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   52.493154] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d94000
<6>[   52.493996] fbcon: xedrmfb (fb0) is primary device
<7>[   52.494804] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[   52.494956] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[   52.495078] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[   52.495202] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[   52.495305] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[   52.495407] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[   52.495509] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[   52.495607] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[   52.495705] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, 
<7>[   52.495800] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[   52.495916] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[   52.496027] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   52.496133] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   52.496236] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[   52.496336] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   52.496435] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   52.496510] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   52.496592] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[   52.496671] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[   52.496760] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, 
<7>[   52.496842] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[   52.496931] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   52.497022] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   52.497112] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[   52.497194] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   52.497270] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   52.497344] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   52.497424] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[   52.497510] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[   52.497616] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[   52.497722] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[   52.497848] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb (   0 -    0) -> (   0 - 4054), size    0 -> 4054
<7>[   52.497953] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[   52.498066] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   3,    1 ->    2,  12,  12,  12,  11,  12,   0,   0,   0,   3,    0
<7>[   52.498169] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]  blocks   25,  25,  25,  25,  25,  25,   0,   0,   7,  73,    7 ->   49, 289, 289, 289, 265, 289,   0,   0,  63,  73,   87
<7>[   52.498262] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->   55, 319, 319, 319, 293, 319,   0,   0,  64,  82,   88
<7>[   52.498340] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.498417] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.498490] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.498560] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.498628] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.498697] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.498770] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.498856] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.498955] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.499052] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.499139] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.499221] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.499293] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.499364] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.499432] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.499498] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.499564] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.499634] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.499703] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.499774] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.499859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[   52.499983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   52.500093] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   52.500189] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.500284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.500372] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   52.500486] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[   52.500627] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[   52.500737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   52.500834] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[   52.500935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   52.501035] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   52.501133] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   52.501225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   52.501303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[   52.501379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   52.501456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   52.501524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   52.501590] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[   52.501658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   52.501727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[   52.501800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[   52.501886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     pixelformat: RGB
<7>[   52.501972] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     colorimetry: sRGB
<7>[   52.502055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     bpc: 0
<7>[   52.502137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     dynamic range: VESA range
<7>[   52.502217] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     content type: Not defined
<7>[   52.502285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   52.502354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[   52.502428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[   52.502501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[   52.502577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.502661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.502743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.502824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   52.502919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.503000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   52.503080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   52.503157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   52.503236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   52.503312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   52.503378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[   52.503448] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[   52.503518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   52.503588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.503655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.503717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.503778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.503843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.503921] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.503999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.504074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.504151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.504227] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.504291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[   52.504354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[   52.504413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[   52.504474] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[   52.504535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[   52.504597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[   52.504664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[   52.504729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[   52.505956] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] 
<6>[   52.522956] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[   52.523102] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[   52.545681] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[   52.712069] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[   52.713318] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[   52.723813] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   52.724132] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[   52.724136] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   52.724470] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[   52.724786] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[   52.777066] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   52.777363] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   52.805910] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   52.806317] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.806346] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[   52.807076] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.807096] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[   52.807366] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[   52.807657] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[   52.807930] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[   52.808179] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[   52.808420] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[   52.808648] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[   52.808878] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[   52.809094] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[   52.809308] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[   52.809517] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[   52.809741] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[   52.809988] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[   52.810253] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[   52.810487] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   52.811878] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[   52.812145] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (495 ms remaining)
<7>[   52.814307] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   52.814584] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   52.814841] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[   52.815130] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.948404] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[   53.312960] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[   53.375883] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   53.376303] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[   53.376700] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[   53.412927] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   53.413255] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   53.413558] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[   53.413884] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   53.545574] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.545566] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.545566] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.698507] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   53.700701] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   53.701054] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[   53.704225] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   53.705473] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[   53.706431] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[   53.707456] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[   53.708485] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[   53.709629] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[   53.709887] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[   53.711353] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[   53.711606] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[   53.712363] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[   53.712766] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] 
<7>[   53.713035] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[   53.713324] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[   53.715189] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[   53.715208] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[   53.715476] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[   53.729678] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[   53.731934] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[   53.732252] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[   53.733585] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[   53.735953] Console: switching to colour frame buffer device 180x56
<6>[   53.751088] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[   53.761882] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[   53.762237] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[   53.762514] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[   53.762761] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[   53.763019] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[   53.763238] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[   53.763446] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[   53.763651] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[   53.763871] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[   53.764085] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[   53.764287] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[   53.764486] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[   53.764673] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[   53.764824] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]] 
<7>[   53.764861] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[   53.765078] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   53.765082] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[   53.765281] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[   53.765458] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[   53.765670] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[   53.765854] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[   53.766036] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[   53.766216] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   53.766224] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[   53.766261] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   53.766417] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[   53.767394] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[   53.767636] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[   53.767623] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   53.768128] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[   53.768448] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[   53.768780] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[   53.769073] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   53.769871] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   53.770085] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   53.770259] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   53.771221] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   53.771236] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.771239] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.771241] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   53.771245] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.771247] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   53.771261] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.771262] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   53.771266] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.771313] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   53.771476] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   53.772278] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   53.772416] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   53.772559] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<5>[   53.776864] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.776876] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.776880] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.777050] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   53.777126] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   53.777162] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   53.777193] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   53.777662] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   53.778076] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   53.778389] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   53.778789] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   53.779199] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   53.779251] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   53.779283] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   53.779668] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   53.780042] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   53.780080] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   53.780110] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   53.780467] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   53.780750] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   53.780784] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   53.780803] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   53.780813] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   53.780822] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   53.781546] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   53.781621] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[   53.781635] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[   53.781645] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[   53.781655] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[   53.781732] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   53.784070] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   53.784273] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[   53.797367] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[   53.848865] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[   53.850327] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[   53.850476] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[   53.850694] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[   53.863535] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[   53.863637] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[   53.863722] [IGT] xe_module_load: exiting, ret=0
<7>[   53.888494] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   53.888641] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   53.888734] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   53.891446] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.891573] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.891665] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.891751] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.891847] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.891930] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.892011] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.892092] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.892174] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.892256] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.892338] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.892417] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.892497] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.892577] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.892658] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.892737] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.892817] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.892925] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.893210] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.893296] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.893376] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.893455] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.893536] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.893619] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.893702] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.893782] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.893869] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.893953] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.894035] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.894116] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.894197] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.894278] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.894358] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.894439] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.894519] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.894598] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[   53.901365] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[   53.902993] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<7>[   53.903728] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<6>[   53.903839] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<7>[   53.903861] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<6>[   53.904891] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[   54.824096] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   54.824209] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   54.824341] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   55.147300] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   56.297001] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[   56.297335] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067