<5>[ 0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Wed Feb 26 23:01:28 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem282: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem284: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000018] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000380] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000381] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004671] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004679] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004698] Using GB pages for direct mapping
<6>[ 0.005380] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005381] printk: early log buf free: 258912(98%)
<6>[ 0.005381] Secure boot disabled
<6>[ 0.005383] ACPI: Early table checksum verification disabled
<6>[ 0.005386] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005389] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005393] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005396] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005397] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005399] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005402] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005403] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005404] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005405] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005407] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005408] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005409] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005410] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005412] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005413] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005415] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005416] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005417] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005418] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005420] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005421] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005422] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005424] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005425] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005426] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005427] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005429] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005430] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005431] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005433] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005434] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005435] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005436] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005438] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005439] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005440] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005442] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005443] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005444] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005445] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005447] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005448] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005449] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005450] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005452] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005453] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005454] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005456] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005457] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005458] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005459] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005459] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005460] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005460] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005460] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005461] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005461] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005461] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005461] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005462] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005462] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005462] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005463] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005463] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005463] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005463] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005464] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005464] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005464] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005465] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005465] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005465] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005465] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005466] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005466] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005466] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005467] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005467] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005467] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005467] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005468] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005468] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005468] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005469] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005469] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005469] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005469] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005470] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005470] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005470] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005471] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005471] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005471] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005471] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005472] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005472] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005472] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005473] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005536] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005738] No NUMA configuration found
<6>[ 0.005739] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005744] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005854] Zone ranges:
<6>[ 0.005855] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005856] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005856] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005857] Device empty
<6>[ 0.005857] Movable zone start for each node
<6>[ 0.005858] Early memory node ranges
<6>[ 0.005858] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005859] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005860] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005860] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 0.005861] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005866] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005883] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007905] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036478] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 0.036545] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.037013] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.037019] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.037069] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.037071] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.037072] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037075] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037075] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037087] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 0.037093] TSC deadline timer available
<6>[ 0.037095] CPU topo: Max. logical packages: 1
<6>[ 0.037095] CPU topo: Max. logical dies: 1
<6>[ 0.037095] CPU topo: Max. dies per package: 1
<6>[ 0.037097] CPU topo: Max. threads per core: 1
<6>[ 0.037097] CPU topo: Num. cores per package: 8
<6>[ 0.037098] CPU topo: Num. threads per package: 8
<6>[ 0.037098] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037111] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037112] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037113] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 0.037114] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 0.037114] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037115] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037115] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037116] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037116] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037116] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037117] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037117] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 0.037119] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037119] Booting paravirtualized kernel on bare hardware
<6>[ 0.037121] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037130] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037467] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037471] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037472] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037485] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[ 0.037570] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037584] random: crng init done
<6>[ 0.039434] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040350] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040406] Fallback order for Node 0: 0
<6>[ 0.040409] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 0.040409] Policy zone: Normal
<6>[ 0.040418] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.040419] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040421] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041360] software IO TLB: area num 8.
<4>[ 0.086628] **********************************************************
<4>[ 0.086629] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086629] ** **
<4>[ 0.086629] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086629] ** via the console, logs, and other interfaces. This **
<4>[ 0.086630] ** might reduce the security of your system. **
<4>[ 0.086630] ** **
<4>[ 0.086630] ** If you see this message and you are not debugging **
<4>[ 0.086630] ** the kernel, report this immediately to your system **
<4>[ 0.086630] ** administrator! **
<4>[ 0.086630] ** **
<4>[ 0.086631] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086631] **********************************************************
<6>[ 0.087695] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.088019] ftrace: allocating 59523 entries in 233 pages
<6>[ 0.113458] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114662] Dynamic Preempt: voluntary
<6>[ 0.115106] Running RCU self tests
<6>[ 0.115106] Running RCU synchronous self tests
<6>[ 0.115107] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115107] rcu: RCU lockdep checking is enabled.
<6>[ 0.115107] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115108] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115108] Rude variant of Tasks RCU enabled.
<6>[ 0.115109] Tracing variant of Tasks RCU enabled.
<6>[ 0.115109] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115109] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115148] Running RCU synchronous self tests
<6>[ 0.115151] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115154] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115157] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125232] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.125686] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.126023] Console: colour dummy device 80x25
<6>[ 0.126031] printk: legacy console [tty0] enabled
<6>[ 0.127211] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127218] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127222] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127225] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127229] ... CLASSHASH_SIZE: 4096
<6>[ 0.127233] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127236] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127240] ... CHAINHASH_SIZE: 262144
<6>[ 0.127244] memory used by lock dependency info: 54145 kB
<6>[ 0.127248] memory used for stack traces: 4224 kB
<6>[ 0.127252] per task-struct memory footprint: 1920 bytes
<6>[ 0.127302] ACPI: Core revision 20240827
<6>[ 0.128204] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128268] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128274] DMAR: Host address width 38
<6>[ 0.128278] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128311] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128342] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128365] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128390] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128411] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128445] DMAR: SATC flags: 0x1
<6>[ 0.128454] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128460] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128464] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130515] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.135693] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.135711] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.135785] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.135792] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.135967] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.135972] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.135983] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.135991] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.135996] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.136004] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.136011] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.136026] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.136032] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.136037] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.136042] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.136048] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.136055] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.136060] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.136066] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.136072] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.136706] Freeing SMP alternatives memory: 48K
<6>[ 0.136706] pid_max: default: 32768 minimum: 301
<6>[ 0.136706] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.136706] landlock: Up and running.
<6>[ 0.136706] Yama: becoming mindful.
<6>[ 0.136706] AppArmor: AppArmor initialized
<6>[ 0.136706] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136706] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136706] Running RCU synchronous self tests
<6>[ 0.136706] Running RCU synchronous self tests
<6>[ 0.136706] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.136706] Running RCU Tasks wait API self tests
<6>[ 0.136706] Running RCU Tasks Rude wait API self tests
<6>[ 0.136706] Running RCU Tasks Trace wait API self tests
<6>[ 0.136706] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.136706] core: cpu_core PMU driver:
<6>[ 0.136706] ... version: 6
<6>[ 0.136706] ... bit width: 48
<6>[ 0.136706] ... generic registers: 10
<6>[ 0.136710] ... value mask: 0000ffffffffffff
<6>[ 0.136715] ... max period: 00007fffffffffff
<6>[ 0.136719] ... fixed-purpose events: 4
<6>[ 0.136722] ... event mask: 0001000f000003ff
<6>[ 0.136753] signal: max sigframe size: 3632
<6>[ 0.136775] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.136858] rcu: Hierarchical SRCU implementation.
<6>[ 0.136862] rcu: Max phase no-delay instances is 400.
<6>[ 0.137774] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139578] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.139853] smp: Bringing up secondary CPUs ...
<6>[ 0.140197] smpboot: x86: Booting SMP configuration:
<6>[ 0.140204] .... node #0, CPUs: #1 #2
<6>[ 0.142833] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.145783] #3 #4 #5 #6 #7
<6>[ 0.010836] core: cpu_atom PMU driver:
<6>[ 0.010836] ... version: 6
<6>[ 0.010836] ... bit width: 48
<6>[ 0.010836] ... generic registers: 8
<6>[ 0.010836] ... value mask: 0000ffffffffffff
<6>[ 0.010836] ... max period: 00007fffffffffff
<6>[ 0.010836] ... fixed-purpose events: 6
<6>[ 0.010836] ... event mask: 00000077000000ff
<6>[ 0.156824] smp: Brought up 1 node, 8 CPUs
<6>[ 0.156824] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.158862] Memory: 32344784K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775240K reserved, 0K cma-reserved)
<6>[ 0.160653] devtmpfs: initialized
<6>[ 0.162088] x86/mm: Memory block size: 128MB
<6>[ 0.180021] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.180760] Running RCU synchronous self tests
<6>[ 0.180773] Running RCU synchronous self tests
<6>[ 0.180806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.180806] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.181030] pinctrl core: initialized pinctrl subsystem
<6>[ 0.181707] PM: RTC time: 23:52:31, date: 2025-02-26
<6>[ 0.182534] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.183460] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.183762] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.184056] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.184123] audit: initializing netlink subsys (disabled)
<5>[ 0.184163] audit: type=2000 audit(1740613951.048:1): state=initialized audit_enabled=0 res=1
<6>[ 0.185253] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.185254] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.185260] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.185265] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.185269] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.185314] EISA bus registered
<6>[ 0.185339] cpuidle: using governor ladder
<6>[ 0.185339] cpuidle: using governor menu
<6>[ 0.185339] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.186073] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.186102] PCI: Using configuration type 1 for base access
<6>[ 0.186240] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.187881] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.187881] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.187881] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.187881] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.207708] raid6: avx2x4 gen() 77481 MB/s
<6>[ 0.224707] raid6: avx2x2 gen() 78681 MB/s
<6>[ 0.241707] raid6: avx2x1 gen() 69824 MB/s
<6>[ 0.241711] raid6: using algorithm avx2x2 gen() 78681 MB/s
<6>[ 0.258707] raid6: .... xor() 57454 MB/s, rmw enabled
<6>[ 0.258712] raid6: using avx2x2 recovery algorithm
<6>[ 0.262150] fbcon: Taking over console
<6>[ 0.263414] ACPI: Added _OSI(Module Device)
<6>[ 0.263465] ACPI: Added _OSI(Processor Device)
<6>[ 0.263509] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.263554] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.984069] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 1.027761] ACPI: EC: EC started
<6>[ 1.027788] ACPI: EC: interrupt blocked
<6>[ 1.034513] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 1.034529] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 1.131059] Callback from call_rcu_tasks() invoked.
<6>[ 1.384184] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.384193] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.411986] ACPI: Interpreter enabled
<6>[ 1.412079] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.412083] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.417260] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.417267] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.436530] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.436579] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.503323] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.503839] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.508835] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.886787] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.924262] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 2.114604] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 2.119899] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 2.144613] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 2.174689] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.175421] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.176128] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 2.273795] ACPI: \: Can't tag data node
<3>[ 2.276123] ACPI: \: Can't tag data node
<3>[ 2.277986] ACPI: \: Can't tag data node
<3>[ 2.280279] ACPI: \: Can't tag data node
<3>[ 2.282289] ACPI: \: Can't tag data node
<6>[ 2.456343] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.457259] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.458084] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.458881] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.459674] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.461827] ACPI: \PIN_: New power resource
<6>[ 2.467964] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.467996] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.473270] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.487804] PCI host bridge to bus 0000:00
<6>[ 2.487867] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.487882] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.487895] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.487908] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.487921] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.487936] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.492629] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.492706] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.492706] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.492706] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.492706] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.493732] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.495694] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.495779] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 2.497813] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.497847] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.497858] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 2.499154] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.499196] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.499210] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.499230] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.499365] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.499427] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.508164] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.508212] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.508225] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.508243] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.508366] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.508418] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.512922] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.512970] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.512984] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.513004] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.513137] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.513190] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.518226] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.518264] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 2.518278] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.518480] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.518509] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.518516] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 2.518914] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.518967] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 2.519038] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.521091] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.521144] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 2.521152] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 2.521211] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.521215] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.522419] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.522471] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 2.522479] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 2.522537] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.522540] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.523833] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.523891] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 2.523959] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.526341] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.526430] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 2.526533] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.526927] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.526980] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 2.527049] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.529211] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.529275] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 2.529284] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 2.529579] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.529679] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.531105] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.531216] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.532598] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.532706] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.534324] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.534419] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.535745] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.535829] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 2.536173] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.538532] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.538608] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 2.538614] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 2.538862] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.538895] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.538903] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.538911] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.539034] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.539090] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.543992] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.544101] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.544133] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.544473] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.544634] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.549427] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.550873] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.550988] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 2.551003] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 2.551113] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.551551] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.551616] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 2.551628] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.553039] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.553222] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.553436] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.553498] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.553566] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.554686] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 2.554741] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 2.554749] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 2.554758] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 2.555079] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.555242] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.555403] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.555587] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.555659] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.555669] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.555678] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.555870] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.555874] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.556441] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.557784] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.558201] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.558259] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.558803] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.558862] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 3.055442] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 13.074411] Low-power S0 idle used by default for system suspend
<6>[ 13.126372] ACPI: EC: interrupt unblocked
<6>[ 13.126383] ACPI: EC: event unblocked
<6>[ 13.126419] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 13.126425] ACPI: EC: GPE=0x6e
<6>[ 13.126431] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 13.126440] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 13.126918] iommu: Default domain type: Translated
<6>[ 13.126918] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 13.133533] SCSI subsystem initialized
<7>[ 13.134064] libata version 3.00 loaded.
<6>[ 13.134165] ACPI: bus type USB registered
<6>[ 13.134233] usbcore: registered new interface driver usbfs
<6>[ 13.134267] usbcore: registered new interface driver hub
<6>[ 13.134310] usbcore: registered new device driver usb
<6>[ 13.134432] pps_core: LinuxPPS API ver. 1 registered
<6>[ 13.134436] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 13.134455] PTP clock support registered
<6>[ 13.135014] EDAC MC: Ver: 3.0.0
<6>[ 13.136935] efivars: Registered efivars operations
<6>[ 13.138847] NetLabel: Initializing
<6>[ 13.138851] NetLabel: domain hash size = 128
<6>[ 13.138854] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 13.138936] NetLabel: unlabeled traffic allowed by default
<6>[ 13.139170] mctp: management component transport protocol core
<6>[ 13.139175] NET: Registered PF_MCTP protocol family
<6>[ 13.139213] PCI: Using ACPI for IRQ routing
<7>[ 13.159306] PCI: pci_cache_line_size set to 64 bytes
<6>[ 13.159589] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 13.159719] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 13.159729] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 13.159732] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 13.159735] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 13.159737] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 13.160728] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 13.160738] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 13.160743] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 13.160757] vgaarb: loaded
<6>[ 13.160979] clocksource: Switched to clocksource tsc-early
<5>[ 13.162230] VFS: Disk quotas dquot_6.6.0
<6>[ 13.162255] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 13.163243] AppArmor: AppArmor Filesystem Enabled
<6>[ 13.163412] pnp: PnP ACPI init
<6>[ 13.164362] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 13.164373] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 13.165806] system 00:02: [io 0x06a4] has been reserved
<6>[ 13.165816] system 00:02: [io 0x06a0] has been reserved
<6>[ 13.186044] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 13.186055] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 13.186065] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 13.186073] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 13.186081] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 13.186090] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 13.186099] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 13.186107] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 13.188772] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 13.191089] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 13.191229] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 13.195981] pnp: PnP ACPI: found 8 devices
<6>[ 13.229870] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 13.230507] NET: Registered PF_INET protocol family
<6>[ 13.230832] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.237349] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 13.237763] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 13.238170] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.239516] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 13.242654] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 13.243403] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 13.245078] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 13.246908] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 13.247050] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 13.247080] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 13.247105] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 13.247201] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 13.247219] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 13.247234] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 13.247252] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 13.247374] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 13.247463] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 13.247554] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 13.247643] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 13.247716] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 13.247735] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 13.247757] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 13.247777] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.247809] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 13.247824] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 13.247856] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 13.247876] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.247908] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 13.247923] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 13.247943] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 13.247963] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.247995] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 13.248009] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 13.248029] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 13.248057] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 13.248104] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 13.248166] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 13.248182] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 13.248196] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 13.248211] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 13.248227] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 13.248244] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 13.248257] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 13.248271] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.248289] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 13.248302] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 13.248316] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.248333] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 13.248346] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 13.248360] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.248378] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 13.248391] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 13.248406] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 13.250864] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 13.254307] PCI: CLS 0 bytes, default 64
<6>[ 13.254496] DMAR: No RMRR found
<6>[ 13.254541] DMAR: No ATSR found
<6>[ 13.254550] DMAR: dmar1: Using Queued invalidation
<6>[ 13.254597] DMAR: dmar0: Using Queued invalidation
<6>[ 13.254616] DMAR: dmar2: Using Queued invalidation
<6>[ 13.256483] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 13.256653] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 13.256811] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 13.256960] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 13.265416] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 13.276379] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 13.276973] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 13.277528] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 13.278103] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 13.278614] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 13.278716] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 13.278821] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 13.279015] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 13.279170] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 13.279347] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 13.279448] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 13.279674] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 13.279778] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 13.279895] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 13.279997] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 13.280172] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 13.280280] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 13.280417] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 13.280569] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 13.280836] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 13.280959] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 13.281072] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 13.281178] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 13.281286] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 13.281397] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 13.281535] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 13.281694] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 13.304421] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 13.304440] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 13.304454] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 13.309580] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 13.309668] clocksource: Switched to clocksource tsc
<6>[ 13.309896] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 13.318639] Initialise system trusted keyrings
<5>[ 13.318774] Key type blacklist registered
<6>[ 13.319346] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 13.336105] zbud: loaded
<6>[ 13.338492] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 13.338675] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 13.338686] ntfs3: Read-only LZX/Xpress compression included
<5>[ 13.339319] integrity: Platform Keyring initialized
<5>[ 13.339356] integrity: Machine keyring initialized
<6>[ 13.351002] xor: automatically using best checksumming function avx
<5>[ 13.351019] Key type asymmetric registered
<5>[ 13.351038] Asymmetric key parser 'x509' registered
<6>[ 13.351217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 13.351813] io scheduler mq-deadline registered
<6>[ 13.353302] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 13.355916] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 13.356620] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 13.358733] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 13.359376] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 13.361420] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 13.362105] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 13.364048] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 13.364662] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 13.367061] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 13.367748] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 13.368605] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 13.374223] Monitor-Mwait will be used to enter C-1 state
<7>[ 13.374364] Monitor-Mwait will be used to enter C-2 state
<7>[ 13.374419] Monitor-Mwait will be used to enter C-3 state
<6>[ 13.383117] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 13.383415] ACPI: button: Lid Switch [LID0]
<6>[ 13.383827] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 13.384117] ACPI: button: Sleep Button [SLPB]
<6>[ 13.384465] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 13.385079] ACPI: button: Power Button [PWRB]
<4>[ 13.397379] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 13.404385] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 13.413029] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 13.424672] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 13.437164] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 13.444301] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 13.451161] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 13.457825] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 13.547834] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 13.547864] ACPI: thermal: Thermal Zone [TZ00] (51 C)
<6>[ 13.550376] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 13.550929] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 13.553151] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 13.576183] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 13.610412] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 13.613448] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 13.639080] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 13.643356] hpet_acpi_add: no address or irqs in _CRS
<6>[ 13.643612] Linux agpgart interface v0.103
<6>[ 13.644826] ACPI: bus type drm_connector registered
<6>[ 13.676687] loop: module loaded
<6>[ 13.748907] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 13.941040] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 14.109427] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 14.235866] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 14.354067] Key type psk registered
<6>[ 14.360811] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 14.361514] nvme nvme0: pci function 0000:80:00.0
<6>[ 14.361710] tun: Universal TUN/TAP device driver, 1.6
<6>[ 14.363513] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.363620] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 14.365520] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.367276] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.367304] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 14.367328] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.367694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 14.367715] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.367726] usb usb1: Product: xHCI Host Controller
<6>[ 14.367733] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 14.367742] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 14.368787] hub 1-0:1.0: USB hub found
<6>[ 14.368880] hub 1-0:1.0: 1 port detected
<6>[ 14.372695] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 14.372712] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.372723] usb usb2: Product: xHCI Host Controller
<6>[ 14.372730] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 14.372739] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 14.373409] hub 2-0:1.0: USB hub found
<6>[ 14.373456] hub 2-0:1.0: 3 ports detected
<6>[ 14.397000] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 14.397827] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.397874] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 14.400404] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.402156] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.402186] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 14.402207] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.402463] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 14.402478] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.402489] usb usb3: Product: xHCI Host Controller
<6>[ 14.402496] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 14.402505] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 14.403233] hub 3-0:1.0: USB hub found
<6>[ 14.403294] hub 3-0:1.0: 8 ports detected
<6>[ 14.405459] nvme0n1: p1 p2
<6>[ 14.433512] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 14.433533] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.433543] usb usb4: Product: xHCI Host Controller
<6>[ 14.433551] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 14.433559] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 14.434161] hub 4-0:1.0: USB hub found
<6>[ 14.434207] hub 4-0:1.0: 2 ports detected
<6>[ 14.442135] usbcore: registered new interface driver usb-storage
<6>[ 14.442265] usbcore: registered new interface driver usbserial_generic
<6>[ 14.442366] usbserial: USB Serial support registered for generic
<6>[ 14.442419] usbcore: registered new interface driver ftdi_sio
<6>[ 14.442453] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 14.442503] usbcore: registered new interface driver pl2303
<6>[ 14.442536] usbserial: USB Serial support registered for pl2303
<6>[ 14.442650] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 14.442660] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 15.151402] i8042: Can't read CTR while initializing i8042
<3>[ 15.151414] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 15.152819] mousedev: PS/2 mouse device common for all mice
<6>[ 15.153641] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 15.155306] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 15.155513] rtc_cmos rtc_cmos: setting system clock to 2025-02-26T23:52:46 UTC (1740613966)
<6>[ 15.155626] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 15.155658] i2c_dev: i2c /dev entries driver
<6>[ 15.158805] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 15.158814] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 15.158820] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 15.158851] device-mapper: uevent: version 1.0.3
<6>[ 15.159085] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 15.159163] platform eisa.0: Probing EISA bus 0
<4>[ 15.159170] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 15.159178] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 15.159185] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 15.159192] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 15.159198] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 15.159205] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 15.159211] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 15.159218] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 15.159225] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 15.159230] platform eisa.0: EISA: Detected 0 cards
<6>[ 15.159236] intel_pstate: Intel P-state driver initializing
<6>[ 15.161805] Hybrid CPU capacity scaling enabled
<6>[ 15.162710] intel_pstate: HWP enabled
<6>[ 15.162714] sdhci: Secure Digital Host Controller Interface driver
<6>[ 15.162719] sdhci: Copyright(c) Pierre Ossman
<6>[ 15.162805] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 15.164672] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 15.165374] drop_monitor: Initializing network drop monitor service
<6>[ 15.165564] NET: Registered PF_INET6 protocol family
<6>[ 15.168267] Segment Routing with IPv6
<6>[ 15.168325] In-situ OAM (IOAM) with IPv6
<6>[ 15.168384] NET: Registered PF_PACKET protocol family
<5>[ 15.168522] Key type dns_resolver registered
<4>[ 15.172278] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 15.172781] microcode: Current revision: 0x0000011b
<6>[ 15.173854] IPI shorthand broadcast: enabled
<6>[ 15.190800] sched_clock: Marking stable (15180000786, 9836189)->(15275169057, -85332082)
<6>[ 15.191538] registered taskstats version 1
<5>[ 15.192623] Loading compiled-in X.509 certificates
<6>[ 15.220554] Demotion targets for Node 0: null
<6>[ 15.220846] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 15.220853] kmemleak: Automatic memory scanning thread started
<5>[ 15.221075] Key type .fscrypt registered
<5>[ 15.221081] Key type fscrypt-provisioning registered
<6>[ 15.223760] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 15.225575] Key type encrypted registered
<6>[ 15.225582] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 15.225708] ima: No TPM chip found, activating TPM-bypass!
<5>[ 15.225722] Loading compiled-in module X.509 certificates
<5>[ 15.226409] Loaded X.509 cert 'Build time autogenerated kernel key: b89704650a7b87c7e620cd0fbc372c6fd8346181'
<6>[ 15.226419] ima: Allocated hash algorithm: sha256
<6>[ 15.226466] ima: No architecture policies found
<6>[ 15.226556] evm: Initialising EVM extended attributes:
<6>[ 15.226560] evm: security.selinux
<6>[ 15.226563] evm: security.SMACK64
<6>[ 15.226565] evm: security.SMACK64EXEC
<6>[ 15.226568] evm: security.SMACK64TRANSMUTE
<6>[ 15.226571] evm: security.SMACK64MMAP
<6>[ 15.226574] evm: security.apparmor
<6>[ 15.226577] evm: security.ima
<6>[ 15.226580] evm: security.capability
<6>[ 15.226583] evm: HMAC attrs: 0x1
<6>[ 15.228602] PM: Magic number: 13:709:909
<6>[ 15.228621] block nbd9: hash matches
<6>[ 15.228646] port serial8250:0.3: hash matches
<6>[ 15.228703] acpi SPT0002:02: hash matches
<6>[ 15.228847] printk: legacy console [netcon0] enabled
<6>[ 15.228853] netconsole: network logging started
<6>[ 15.229365] RAS: Correctable Errors collector initialized.
<6>[ 15.229502] clk: Disabling unused clocks
<6>[ 15.229511] PM: genpd: Disabling unused power domains
<6>[ 15.230368] md: Waiting for all devices to be available before autodetect
<6>[ 15.230376] md: If you don't use raid, use raid=noautodetect
<6>[ 15.230382] md: Autodetecting RAID arrays.
<6>[ 15.230391] md: autorun ...
<6>[ 15.230395] md: ... autorun DONE.
<6>[ 15.283884] EXT4-fs (nvme0n1p2): mounted filesystem d94563f3-71a5-4472-983a-b9d25270145b ro with ordered data mode. Quota mode: none.
<6>[ 15.283959] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 15.284716] devtmpfs: mounted
<6>[ 15.295341] Freeing unused decrypted memory: 2028K
<6>[ 15.296241] Freeing unused kernel image (initmem) memory: 5632K
<6>[ 15.296264] Write protecting the kernel read-only data: 34816k
<6>[ 15.296614] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[ 15.296879] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[ 15.302624] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 15.302834] Run /sbin/init as init process
<7>[ 15.302843] with arguments:
<7>[ 15.302844] /sbin/init
<7>[ 15.302845] with environment:
<7>[ 15.302846] HOME=/
<7>[ 15.302847] TERM=linux
<7>[ 15.302848] BOOT_IMAGE=/boot/drm_intel
<7>[ 15.350019] systemd[1]: Inserted module 'autofs4'
<7>[ 15.367939] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 15.367984] systemd[1]: Detected architecture x86-64.
<7>[ 15.369290] systemd[1]: Hostname set to <shard-lnl-6>.
<7>[ 15.648913] systemd[1]: Queued start job for default target graphical.target.
<7>[ 15.701370] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.705917] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.708665] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.709081] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.710218] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 15.710372] systemd[1]: Expecting device dev-disk-by\x2duuid-BBCC\x2dD8CD.device - /dev/disk/by-uuid/BBCC-D8CD...
<7>[ 15.710487] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 15.710611] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 15.710700] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 15.710785] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 15.710884] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 15.711226] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 15.711688] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 15.712016] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 15.712363] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 15.712641] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 15.712846] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 15.713132] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 15.713429] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 15.713694] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 15.713921] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.714244] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 15.714485] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 15.734346] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 15.739299] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 15.742725] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 15.745649] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 15.750608] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 15.753631] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 15.757146] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 15.760183] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 15.762830] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 15.765668] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 15.769686] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 15.772974] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 15.776628] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 15.781231] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 15.785596] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 15.786554] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 15.789504] systemd-journald[213]: Collecting audit messages is disabled.
<7>[ 15.791020] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 15.795412] pstore: Using crash dump compression: deflate
<7>[ 15.800058] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 15.800268] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.800347] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.804821] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 15.805999] pstore: Registered efi_pstore as persistent store backend
<6>[ 15.809070] fuse: init (API version 7.42)
<7>[ 15.812229] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.973501] EXT4-fs (nvme0n1p2): re-mounted d94563f3-71a5-4472-983a-b9d25270145b r/w. Quota mode: none.
<6>[ 16.010038] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:306577408k SS
<7>[ 16.024017] systemd-journald[213]: Received client request to flush runtime journal.
<7>[ 16.037829] systemd-journald[213]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 16.037858] systemd-journald[213]: Rotating system journal.
<4>[ 16.705716] nvme nvme0: using unchecked data buffer
<6>[ 16.830737] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 16.877129] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877153] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877177] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877202] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877227] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877251] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877276] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877301] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877325] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877350] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877374] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877399] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877423] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877448] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877473] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877497] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877522] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877558] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877582] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877607] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877632] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877656] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877681] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877705] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877730] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877766] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877791] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877874] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877898] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877923] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877948] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.877972] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.878020] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.878044] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.878069] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.878093] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.878118] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.878142] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.905095] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:01, deferring
<4>[ 16.907158] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907182] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907207] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907231] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907256] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907280] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907319] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.907338] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<4>[ 16.907341] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907553] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907623] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907658] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907706] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907814] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907827] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907843] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907874] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907910] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907935] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907959] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.907984] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908009] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908033] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908058] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908082] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908107] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908131] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908156] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908181] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908205] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.908230] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.914486] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 16.917637] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 16.929243] pci 0000:00:05.0: Setting to D3hot
<4>[ 16.939365] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939390] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939410] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939430] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939449] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939469] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939489] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939609] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939626] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939646] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939666] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939686] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939706] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939726] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939746] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939765] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939785] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939805] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939882] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939901] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939921] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.939941] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940022] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940042] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940062] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940118] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940138] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940158] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940177] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940192] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940204] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940224] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940237] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940249] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940269] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940282] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940294] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940307] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.940319] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.941535] pci 0000:00:0b.0: Setting to D3hot
<4>[ 16.953755] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.954591] intel_pmc_core INT33A1:00: initialized
<4>[ 16.986670] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.986696] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<5>[ 17.022900] audit: type=1400 audit(1740613968.365:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=426 comm="apparmor_parser"
<5>[ 17.023290] audit: type=1400 audit(1740613968.366:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=425 comm="apparmor_parser"
<5>[ 17.023685] audit: type=1400 audit(1740613968.366:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=427 comm="apparmor_parser"
<5>[ 17.024733] audit: type=1400 audit(1740613968.367:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=428 comm="apparmor_parser"
<3>[ 17.028193] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<5>[ 17.029312] audit: type=1400 audit(1740613968.372:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=431 comm="apparmor_parser"
<5>[ 17.030404] audit: type=1400 audit(1740613968.372:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=430 comm="apparmor_parser"
<3>[ 17.030975] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<4>[ 17.031242] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031266] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031286] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031305] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031326] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031345] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031365] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031386] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031405] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031448] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031468] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031508] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031528] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031560] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031580] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031600] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031620] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031646] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031668] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031687] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031707] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031729] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031750] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031769] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031789] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031816] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031902] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031922] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031942] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031976] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.031996] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032016] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032035] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032056] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032075] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032095] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032115] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032135] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032155] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032175] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032195] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032215] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032235] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032255] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.032274] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[ 17.033397] audit: type=1400 audit(1740613968.376:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=432 comm="apparmor_parser"
<5>[ 17.035115] audit: type=1400 audit(1740613968.378:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=433 comm="apparmor_parser"
<5>[ 17.037338] audit: type=1400 audit(1740613968.380:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=434 comm="apparmor_parser"
<5>[ 17.040024] audit: type=1400 audit(1740613968.383:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=435 comm="apparmor_parser"
<6>[ 17.395557] ACPI: bus type thunderbolt registered
<6>[ 17.453259] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 17.456763] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 17.479787] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 17.479793] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 17.480477] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 17.480485] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 17.480597] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 17.481772] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 17.483849] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 17.497328] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 17.497367] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 17.513210] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 17.530554] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 17.531819] intel_rapl_common: Found RAPL domain package
<6>[ 17.531853] intel_rapl_common: Found RAPL domain dram
<6>[ 17.554757] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 17.618711] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 17.638335] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:15:be, XID 541, IRQ 176
<6>[ 17.638342] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 17.754561] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 17.754566] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 17.754568] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 17.754569] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 17.754570] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 17.754571] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 17.777822] cryptd: max_cpu_qlen set to 1000
<6>[ 17.854123] AES CTR mode by8 optimization enabled
<6>[ 17.982141] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<4>[ 18.093763] block nvme0n1: No UUID available providing old NGUID
<6>[ 18.156248] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:92
<6>[ 18.156254] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 18.156390] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 18.276978] intel_rapl_common: Found RAPL domain package
<6>[ 18.276983] intel_rapl_common: Found RAPL domain core
<6>[ 18.276986] intel_rapl_common: Found RAPL domain uncore
<6>[ 18.276988] intel_rapl_common: Found RAPL domain dram
<6>[ 18.276989] intel_rapl_common: Found RAPL domain psys
<6>[ 18.294694] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 18.322681] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 18.322690] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 18.322692] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 18.462627] evm: overlay not supported
<6>[ 18.528816] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 18.656938] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 18.700202] loop0: detected capacity change from 0 to 8
<4>[ 18.734375] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[ 18.761332] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 18.761363] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 18.793107] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 18.955165] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 19.146662] Consider using thermal netlink events interface
<6>[ 19.325922] hid: raw HID events driver (C) Jiri Kosina
<6>[ 19.332530] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 19.369788] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.371012] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.372351] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.373304] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.374554] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.375168] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.381568] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.386111] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.390218] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.393123] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.396605] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.399482] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.048777] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 20.048816] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 21.033288] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 21.033332] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 24.072518] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 36.583512] systemd-journald[213]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 75.226391] [IGT] xe_module_load: executing
<7>[ 75.231689] [IGT] xe_module_load: starting subtest load
<5>[ 75.411141] Setting dangerous option force_probe - tainting kernel
<6>[ 75.413947] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 75.415785] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 75.415796] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 75.415916] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 75.416008] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 75.419892] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.40.2.bin version 70.40.2
<7>[ 75.423709] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 75.423799] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 75.423878] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 75.423963] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 75.424045] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 75.424125] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 75.424195] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 75.424262] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 75.424320] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 75.424377] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 75.424432] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 75.424486] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 75.424544] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 75.424600] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 75.424655] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 75.424753] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 75.426055] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 75.430904] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 75.431017] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 75.433754] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 75.434654] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 75.434771] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 75.434913] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 75.435010] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 75.435100] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 75.435187] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 75.435275] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 75.435986] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.40.2.bin version 70.40.2
<7>[ 75.440451] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 75.440627] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 75.440776] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 75.440953] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 75.441087] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 75.441220] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 75.441346] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 75.441472] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 75.441591] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 75.441707] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 75.441824] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 75.441969] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 75.442080] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 75.442189] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 75.443779] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 75.446358] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 75.447309] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 75.447409] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 75.447528] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 75.449184] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 75.449432] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 75.469236] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 75.469722] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 75.469945] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 75.470142] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 75.470316] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 75.470484] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 75.470647] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 75.470807] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 75.471546] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 75.471909] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 75.472230] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 75.472547] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 75.472860] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 75.473097] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 75.473386] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 75.473609] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 75.473900] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 75.474164] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 75.474436] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 75.474700] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 75.474995] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 75.475316] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 75.475573] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 75.475826] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 75.476092] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 75.476361] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 75.476591] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 75.476801] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 75.477042] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 75.477241] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 75.477432] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 75.477613] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 75.477779] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 75.477957] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 75.478112] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 75.478277] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 75.478423] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 75.478565] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 75.478700] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 75.478833] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 75.479010] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 75.479159] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 75.479284] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 75.479404] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 75.479528] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 75.479655] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 75.479778] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 75.479913] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 75.480037] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 75.480788] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 75.480997] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 75.481155] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 75.481295] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 75.481444] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 75.481586] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 75.481708] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 75.481823] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 75.481937] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 75.482048] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 75.482149] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 75.482244] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 75.482338] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 75.482431] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 75.482526] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 75.482618] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 75.482708] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 75.482798] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 75.482897] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 75.482985] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 75.483078] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 75.483162] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 75.483242] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 75.483317] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 75.483391] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 75.483467] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 75.483546] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 75.483628] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 75.483747] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 75.483900] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 75.484044] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 75.484186] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 75.484361] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 75.484643] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 75.484744] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 75.484852] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 75.484981] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 75.485077] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 75.485109] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 75.485213] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 75.485301] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 75.485391] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 75.485787] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 75.485956] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 75.486722] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 75.486818] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 75.486917] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 75.487001] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 75.487093] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 75.487171] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 75.487243] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 75.487315] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 75.489032] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 75.489142] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 75.489237] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 75.489328] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 75.489417] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 75.489504] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 75.489593] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 75.489675] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 75.489756] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 75.489836] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 75.489932] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 75.490021] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 75.490109] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 75.490191] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 75.490271] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 75.490345] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 75.490418] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 75.490489] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 75.490560] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 75.490628] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 75.490695] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 75.490763] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 75.490831] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 75.490917] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 75.490989] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 75.491070] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 75.491152] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 75.491220] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 75.491282] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 75.491345] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 75.494506] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 75.496912] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 75.497050] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 75.497170] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 75.497366] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 75.497557] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 75.497759] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 75.497906] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 75.498030] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 75.498148] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 75.498260] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 75.498371] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 75.498480] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 75.498585] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 75.498690] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 75.498818] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 75.499062] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 75.499177] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 75.499281] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 75.499382] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 75.499480] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 75.499728] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 75.500005] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 75.500909] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 75.501204] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<6>[ 75.502394] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 75.503471] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 75.504058] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 75.505040] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 75.506387] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 75.507002] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 75.509182] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 75.518604] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 75.518615] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.518617] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.518618] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 75.518620] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.518622] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 75.518627] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.518628] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 75.518630] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.518665] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.518666] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.518667] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.518674] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 75.519211] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 75.519770] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 75.519901] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 75.520047] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 75.520194] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 75.520351] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 75.520450] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 75.520539] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 75.520626] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 75.520710] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 75.520826] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 75.521037] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 75.521235] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 75.521369] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 75.521739] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 75.521857] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 75.521988] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 75.522242] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 75.522358] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 75.522459] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 75.522866] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 75.523006] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 75.523129] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 75.523226] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 75.523310] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 75.523392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 75.523473] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 75.523546] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 75.523619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 75.523694] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 75.523770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 75.523852] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 75.523939] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 75.524028] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 75.524116] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 75.524201] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 75.524269] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 75.524339] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 75.524413] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 75.524486] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 75.524566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 75.525391] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 75.525501] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 75.525581] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 75.525660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 75.525737] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 75.525812] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 75.525900] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 75.525990] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 75.526083] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 75.526167] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 75.526242] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 75.526312] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 75.526384] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 75.526460] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 75.526529] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 75.526596] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 75.526657] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 75.526741] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 75.526825] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 75.526931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 75.527035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 75.527205] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 75.527281] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 75.527349] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 75.527422] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 75.527488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 75.527554] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 75.527620] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 75.527718] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 75.527785] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 75.527853] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 75.527926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 75.528001] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 75.528079] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 75.528160] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 75.528257] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 75.528329] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 75.528399] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 75.528467] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 75.528532] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 75.528597] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 75.528661] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 75.528777] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 75.528881] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 75.529105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 75.529237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 75.529340] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 75.529423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 75.529502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 75.529585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 75.529669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 75.529750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 75.529830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 75.529932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 75.530027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 75.530121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 75.530204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 75.530280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 75.530350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 75.530417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 75.530483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 75.530552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 75.530625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 75.530698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 75.530775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 75.530856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 75.530947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 75.531035] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 75.531122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 75.531204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 75.531275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 75.531344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 75.531412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 75.531480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 75.531546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 75.531612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 75.531676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.531736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.531795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.531861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 75.531945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 75.532031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.532114] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.532196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.532267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 75.532333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 75.532400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 75.532610] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 75.532693] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 75.532774] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 75.533053] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 75.533166] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 75.574981] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 75.638951] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 75.781525] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 75.781528] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 75.781529] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 75.781600] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 75.781692] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 75.781778] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 75.781866] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 75.781969] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 75.782068] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 75.782178] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 75.782251] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 75.782320] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 75.782390] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 75.783242] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 75.783309] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 75.783380] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 75.783448] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 75.783514] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 75.783582] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 75.783650] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 75.783719] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 75.783786] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 75.783855] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 75.783921] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 75.784000] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 75.784081] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 75.784161] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 75.784238] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 75.784308] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 75.784367] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 75.784426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 75.784483] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 75.784539] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 75.784596] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 75.784654] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 75.784711] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 75.784766] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 75.784821] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 75.784885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 75.784965] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 75.785044] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 75.785122] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 75.785193] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 75.785248] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 75.785305] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 75.785362] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 75.785419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 75.785480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 75.785539] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 75.785604] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 75.785664] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 75.785923] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 75.786006] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 75.786084] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 75.786479] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 75.786530] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 75.786580] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 75.786763] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 75.786813] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 75.786871] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 75.786923] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 75.786981] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 75.787049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 75.787543] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 75.787611] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 75.787671] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 75.787728] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 75.787785] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 75.787840] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 75.787924] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 75.787999] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 75.788071] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 75.788140] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 75.788208] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 75.788267] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 75.788316] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 75.788369] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 75.788435] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 75.788605] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 75.791257] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 75.805151] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 75.806198] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 75.810891] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000092 [0x49/00]
<7>[ 75.811008] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 75.813795] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 75.814183] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 75.815170] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 75.815269] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 75.815362] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 75.815447] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 75.815537] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 75.815620] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 75.815700] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 75.815778] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 75.815867] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 75.818694] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 75.818851] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 75.818955] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 75.822165] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 75.826683] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 75.826687] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 75.826688] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 75.826690] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 75.826691] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 75.826692] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 75.826693] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 75.826694] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 75.826695] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 75.826697] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 75.826729] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 75.826894] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 75.827047] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 75.827857] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 75.827971] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 75.828080] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 75.828180] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 75.828273] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 75.828365] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 75.828453] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 75.828542] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 75.828633] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 75.828720] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 75.828804] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 75.828923] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 75.829007] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 75.829089] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 75.829169] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 75.829245] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 75.829318] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 75.829393] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 75.829469] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 75.829542] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 75.829612] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 75.829680] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 75.829745] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 75.829808] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 75.829887] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 75.829959] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 75.830042] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 75.830540] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 75.830623] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 75.830956] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 75.831048] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 75.831552] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 75.831623] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 75.831690] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 75.831750] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 75.831808] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 75.831876] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 75.831950] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 75.832022] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 75.832096] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 75.832165] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 75.832222] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 75.832273] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 75.832323] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 75.832371] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 75.832434] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 75.832513] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 75.851399] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 75.852593] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 75.852700] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 75.871893] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 75.872360] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 75.873382] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 75.876978] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 75.880439] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 75.924888] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 75.927150] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 75.927483] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 75.927872] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 75.928168] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 75.928452] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 75.928841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 75.929213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 75.929528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 75.929833] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 75.931555] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 75.931997] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 75.932314] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 75.946073] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 75.956331] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 75.962255] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 75.963148] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 75.967253] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 75.967374] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 75.967981] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 75.969084] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 75.969140] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 75.969626] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 75.970267] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 75.970306] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 75.970689] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 75.971217] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 75.971246] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 75.971274] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 75.978812] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 75.981298] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 75.982257] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 75.982357] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 75.983725] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 75.983810] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 75.983905] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 75.984005] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 75.984187] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 75.984392] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 75.984406] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 75.985031] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 75.985553] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 75.985691] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 75.985809] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 75.986032] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 75.986038] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.986039] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.986040] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 75.986042] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.986043] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 75.986047] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.986048] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 75.986050] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.986070] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 75.986159] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 75.986802] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 75.986919] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 75.987921] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 75.988125] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.988127] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.988128] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.988160] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 75.988173] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 75.988184] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 75.988194] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 75.988343] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 75.988458] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 75.988467] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 75.988475] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 75.988482] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 75.988599] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 75.988699] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 75.988707] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 75.988714] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 75.988720] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 75.988833] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 75.988964] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 75.988973] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 75.988981] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 75.988985] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 75.988987] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 75.988990] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 75.989068] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 75.989081] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 75.989084] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 75.989087] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 75.989089] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 75.989102] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 75.989135] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 75.989189] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 75.989234] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 75.989417] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 75.989541] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 75.990091] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 75.996105] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d97000
<6>[ 75.996946] fbcon: xedrmfb (fb0) is primary device
<7>[ 75.997742] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 75.997864] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 75.997990] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 75.998121] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 75.998224] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 75.998323] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 75.998420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 75.998515] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 75.998607] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 75.998699] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 75.998790] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 75.998920] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 75.999035] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 75.999151] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 75.999246] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 75.999331] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 75.999415] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 75.999494] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 75.999573] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 75.999659] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 75.999735] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 75.999811] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 75.999906] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 76.000001] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 76.000094] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 76.000186] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 76.000267] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 76.000342] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 76.000417] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 76.000505] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 76.000593] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 76.000719] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 76.000817] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 76.000932] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 76.001037] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 76.001132] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 76.001224] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 76.001313] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.001387] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.001459] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.001531] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 76.001601] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.001671] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.001746] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.001824] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 76.001921] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.002012] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.002092] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.002170] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 76.002253] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.002327] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.002392] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.002455] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 76.002522] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.002591] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.002659] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 76.002728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 76.002823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 76.002940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 76.003048] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 76.003154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 76.003247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 76.003354] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 76.003462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 76.003553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 76.003643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 76.003731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 76.003819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 76.003926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 76.004030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 76.004134] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 76.004228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 76.004306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 76.004382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 76.004458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 76.004533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 76.004606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 76.004678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 76.004750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 76.004821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 76.004909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 76.004998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 76.005085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 76.005170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 76.005241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 76.005306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 76.005372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 76.005438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 76.005508] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 76.005576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 76.005643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 76.005712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 76.005781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 76.005857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 76.005943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 76.006031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 76.006115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 76.006191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 76.006258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 76.006322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 76.006385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 76.006449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 76.006512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 76.006573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 76.006634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 76.006695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 76.006757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 76.006822] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 76.006910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 76.006996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 76.007081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 76.007163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 76.007226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 76.007294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 76.007358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 76.007424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 76.007490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 76.007556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 76.013172] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 76.028982] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 76.029249] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 76.052012] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 76.215091] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 76.216715] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 76.238109] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 76.238171] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 76.238469] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 76.238550] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 76.238981] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 76.291083] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 76.291427] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 76.322101] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 76.322601] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 76.322564] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 76.323791] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 76.323774] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 76.324178] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 76.324542] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 76.324867] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 76.325222] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 76.325553] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 76.325834] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 76.326148] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 76.326198] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 76.326411] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 76.326653] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 76.326613] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 76.326921] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 76.326973] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 76.327160] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 76.327351] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 76.327465] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 76.327735] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 76.328047] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 76.332376] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 76.332737] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining)
<7>[ 76.455147] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 76.831108] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 76.914116] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 76.914477] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 76.914835] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 76.950701] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 76.951047] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 76.951372] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 76.951754] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 77.033184] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 77.033184] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 77.033184] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 77.241991] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 77.245101] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 77.245589] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 77.249230] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 77.250595] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 77.252154] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 77.253950] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 77.255308] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 77.256806] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 77.257266] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 77.259108] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 77.259528] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 77.260414] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 77.261055] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 77.261451] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 77.261972] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 77.264196] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 77.264221] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 77.264629] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 77.278009] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 77.280682] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 77.281164] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 77.282703] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 77.285574] Console: switching to colour frame buffer device 180x56
<6>[ 77.300627] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 77.317072] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 77.317493] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 77.317836] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 77.318214] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 77.318512] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 77.318791] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 77.319093] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 77.319357] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 77.319614] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 77.319874] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 77.320136] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 77.320378] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 77.320617] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 77.320919] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 77.321180] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 77.321414] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 77.321658] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 77.321999] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 77.322278] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 77.322533] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 77.322782] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 77.323051] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 77.323425] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 77.323465] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 77.324191] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 77.324231] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 77.324262] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 77.324583] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 77.324923] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 77.325314] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 77.325985] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 77.326302] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 77.327781] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 77.328745] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 77.328998] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 77.329146] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 77.329427] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 77.329492] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 77.329769] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 77.330276] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 77.330295] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.330300] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.330305] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 77.330312] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.330318] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 77.330332] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.330336] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 77.330344] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.330393] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 77.330722] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 77.331761] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 77.332009] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 77.332098] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 77.337150] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.337160] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 77.337165] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 77.337265] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 77.337325] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 77.337358] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 77.337387] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 77.337829] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 77.338200] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 77.338236] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 77.338262] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 77.338602] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 77.338912] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 77.338945] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 77.338972] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 77.339317] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 77.339599] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 77.339628] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 77.339642] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 77.339651] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 77.339659] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 77.340467] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 77.340522] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 77.340532] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 77.340541] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 77.340549] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 77.340613] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 77.343283] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 77.343632] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 77.346272] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 77.378251] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 77.379768] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 77.379933] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 77.380182] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 77.396021] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 77.396137] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 77.396231] [IGT] xe_module_load: exiting, ret=0
<7>[ 77.428020] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 77.428151] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 77.428245] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 77.428333] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 77.428419] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 77.428504] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 77.428590] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 77.428677] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 77.428764] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 77.428861] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 77.428946] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 77.429029] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 77.429113] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 77.429197] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 77.429281] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 77.429365] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 77.429449] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 77.429534] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 77.429626] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 77.429723] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 77.429817] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 77.429932] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 77.430028] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 77.430123] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 77.430218] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 77.430312] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 77.430406] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 77.430501] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 77.430594] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 77.430675] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 77.430756] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 77.430836] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 77.430925] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 77.431007] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 77.431088] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 77.431168] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 77.437779] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 77.440184] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 77.442570] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 77.443164] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 77.448717] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 77.449160] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 77.449261] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 77.456904] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 77.457027] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 78.374937] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 78.374956] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 78.374937] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 78.519937] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 79.847134] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 79.847255] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067