<5>[ 0.000000] Linux version 6.14.0-rc2-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Feb 14 11:41:52 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<5>[ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 1
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f8d518 ESRT=0x68fa4818 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem283: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem285: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000018] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000383] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000384] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004663] esrt: Reserving ESRT space from 0x0000000068fa4818 to 0x0000000068fa4968.
<7>[ 0.004670] e820: update [mem 0x68fa4000-0x68fa4fff] usable ==> reserved
<6>[ 0.004689] Using GB pages for direct mapping
<6>[ 0.005366] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005367] printk: early log buf free: 258848(98%)
<6>[ 0.005367] Secure boot disabled
<6>[ 0.005369] ACPI: Early table checksum verification disabled
<6>[ 0.005373] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005375] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005379] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005382] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005383] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005385] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005386] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005388] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005389] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005390] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005392] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005393] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005395] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005396] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005398] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005399] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005401] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005402] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005404] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005405] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005407] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005408] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005409] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005411] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005412] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005414] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005415] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005416] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005418] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005419] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005421] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005422] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005424] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005425] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005427] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005428] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005429] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005431] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005432] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005434] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005435] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005436] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005438] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005439] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005441] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005442] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005444] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005445] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005447] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005448] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005450] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005451] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005452] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005452] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005452] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005453] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005453] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005453] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005454] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005454] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005454] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005455] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005455] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005455] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005456] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005456] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005456] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005457] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005457] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005457] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005459] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005459] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005459] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005460] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005460] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005460] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005461] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005461] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005461] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005462] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005462] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005462] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005462] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005463] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005463] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005463] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005464] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005464] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005464] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005465] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005465] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005465] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005466] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005466] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005466] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005467] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005467] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005550] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005847] No NUMA configuration found
<6>[ 0.005847] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005852] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<5>[ 6.113330] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
<6>[ 6.113379] Zone ranges:
<6>[ 6.113380] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 6.113381] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 6.113382] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 6.113382] Device empty
<6>[ 6.113383] Movable zone start for each node
<6>[ 6.113384] Early memory node ranges
<6>[ 6.113384] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 6.113385] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 6.113385] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 6.113385] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 6.113387] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 6.113391] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 6.113409] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 6.115447] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 6.144025] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 6.144088] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 6.144813] ACPI: PM-Timer IO Port: 0x1808
<6>[ 6.144819] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 6.144870] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 6.144872] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 6.144874] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 6.144876] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 6.144877] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 6.144888] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 6.144894] TSC deadline timer available
<6>[ 6.144895] CPU topo: Max. logical packages: 1
<6>[ 6.144896] CPU topo: Max. logical dies: 1
<6>[ 6.144896] CPU topo: Max. dies per package: 1
<6>[ 6.144898] CPU topo: Max. threads per core: 1
<6>[ 6.144898] CPU topo: Num. cores per package: 8
<6>[ 6.144899] CPU topo: Num. threads per package: 8
<6>[ 6.144899] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 6.144911] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 6.144912] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 6.144913] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 6.144914] PM: hibernation: Registered nosave memory: [mem 0x68fa4000-0x68fa4fff]
<6>[ 6.144914] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 6.144915] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 6.144915] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 6.144916] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 6.144916] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 6.144916] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 6.144916] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 6.144917] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 6.144918] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 6.144919] Booting paravirtualized kernel on bare hardware
<6>[ 6.144921] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 6.144930] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 6.145265] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 6.145270] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 6.145271] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 6.145283] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<5>[ 6.145362] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 6.145376] random: crng init done
<6>[ 6.147209] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 6.148118] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 6.148175] Fallback order for Node 0: 0
<6>[ 6.148177] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 6.148178] Policy zone: Normal
<6>[ 6.148188] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 6.148188] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 6.148190] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 6.149151] software IO TLB: area num 8.
<4>[ 6.194264] **********************************************************
<4>[ 6.194266] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 6.194266] ** **
<4>[ 6.194266] ** This system shows unhashed kernel memory addresses **
<4>[ 6.194266] ** via the console, logs, and other interfaces. This **
<4>[ 6.194267] ** might reduce the security of your system. **
<4>[ 6.194267] ** **
<4>[ 6.194267] ** If you see this message and you are not debugging **
<4>[ 6.194267] ** the kernel, report this immediately to your system **
<4>[ 6.194267] ** administrator! **
<4>[ 6.194268] ** **
<4>[ 6.194268] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 6.194268] **********************************************************
<6>[ 6.195336] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 6.195654] ftrace: allocating 59507 entries in 233 pages
<6>[ 6.220823] ftrace: allocated 233 pages with 5 groups
<6>[ 6.222063] Dynamic Preempt: voluntary
<6>[ 6.222523] Running RCU self tests
<6>[ 6.222524] Running RCU synchronous self tests
<6>[ 6.222524] rcu: Preemptible hierarchical RCU implementation.
<6>[ 6.222525] rcu: RCU lockdep checking is enabled.
<6>[ 6.222525] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 6.222526] Trampoline variant of Tasks RCU enabled.
<6>[ 6.222526] Rude variant of Tasks RCU enabled.
<6>[ 6.222526] Tracing variant of Tasks RCU enabled.
<6>[ 6.222526] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 6.222527] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 6.222567] Running RCU synchronous self tests
<6>[ 6.222570] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 6.222574] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 6.222576] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 6.233094] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 6.233590] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 6.233936] Console: colour dummy device 80x25
<6>[ 6.233945] printk: legacy console [tty0] enabled
<6>[ 6.235137] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 6.235144] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 6.235148] ... MAX_LOCK_DEPTH: 48
<6>[ 6.235151] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 6.235155] ... CLASSHASH_SIZE: 4096
<6>[ 6.235159] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 6.235162] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 6.235166] ... CHAINHASH_SIZE: 262144
<6>[ 6.235170] memory used by lock dependency info: 54145 kB
<6>[ 6.235174] memory used for stack traces: 4224 kB
<6>[ 6.235178] per task-struct memory footprint: 1920 bytes
<6>[ 6.235229] ACPI: Core revision 20240827
<6>[ 6.236130] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 6.236212] APIC: Switch to symmetric I/O mode setup
<6>[ 6.236217] DMAR: Host address width 38
<6>[ 6.236221] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 6.236254] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 6.236286] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 6.236307] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 6.236333] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 6.236441] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 6.236622] DMAR: SATC flags: 0x1
<6>[ 6.236633] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 6.236638] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 6.236642] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 6.238722] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 6.243780] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 6.243798] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 6.243872] CPU0: Thermal monitoring enabled (TM1)
<6>[ 6.243878] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 6.244081] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 6.244086] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 6.244095] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 6.244103] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 6.244107] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 6.244114] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 6.244121] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 6.244136] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 6.244142] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 6.244147] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 6.244152] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 6.244157] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 6.244163] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 6.244168] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 6.244173] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 6.244178] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 6.244792] Freeing SMP alternatives memory: 48K
<6>[ 6.244792] pid_max: default: 32768 minimum: 301
<6>[ 6.244792] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 6.244792] landlock: Up and running.
<6>[ 6.244792] Yama: becoming mindful.
<6>[ 6.244792] AppArmor: AppArmor initialized
<6>[ 6.244792] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 6.244792] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 6.244792] Running RCU synchronous self tests
<6>[ 6.244792] Running RCU synchronous self tests
<6>[ 6.244792] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 6.244792] Running RCU Tasks wait API self tests
<6>[ 6.244792] Running RCU Tasks Rude wait API self tests
<6>[ 6.244792] Running RCU Tasks Trace wait API self tests
<6>[ 6.244792] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 6.244792] core: cpu_core PMU driver:
<6>[ 6.244792] ... version: 6
<6>[ 6.244792] ... bit width: 48
<6>[ 6.244792] ... generic registers: 10
<6>[ 6.244792] ... value mask: 0000ffffffffffff
<6>[ 6.244800] ... max period: 00007fffffffffff
<6>[ 6.244804] ... fixed-purpose events: 4
<6>[ 6.244808] ... event mask: 0001000f000003ff
<6>[ 6.244839] signal: max sigframe size: 3632
<6>[ 6.244861] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 6.244943] rcu: Hierarchical SRCU implementation.
<6>[ 6.244948] rcu: Max phase no-delay instances is 400.
<6>[ 6.245862] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 6.247706] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 6.247977] smp: Bringing up secondary CPUs ...
<6>[ 6.248326] smpboot: x86: Booting SMP configuration:
<6>[ 6.248333] .... node #0, CPUs: #1 #2
<6>[ 6.249957] Callback from call_rcu_tasks_trace() invoked.
<4>[ 6.253604] #3 #4 #5 #6 #7
<6>[ 0.011000] core: cpu_atom PMU driver:
<6>[ 0.011000] ... version: 6
<6>[ 0.011000] ... bit width: 48
<6>[ 0.011000] ... generic registers: 8
<6>[ 0.011000] ... value mask: 0000ffffffffffff
<6>[ 0.011000] ... max period: 00007fffffffffff
<6>[ 0.011000] ... fixed-purpose events: 6
<6>[ 0.011000] ... event mask: 00000077000000ff
<6>[ 6.265805] smp: Brought up 1 node, 8 CPUs
<6>[ 6.265842] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 6.267914] Memory: 32344868K/33143168K available (24498K kernel code, 5577K rwdata, 9264K rodata, 5624K init, 68412K bss, 775240K reserved, 0K cma-reserved)
<6>[ 6.268313] devtmpfs: initialized
<6>[ 6.268946] x86/mm: Memory block size: 128MB
<6>[ 6.284837] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 6.285307] Running RCU synchronous self tests
<6>[ 6.285320] Running RCU synchronous self tests
<6>[ 6.285337] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 6.285337] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 6.285337] pinctrl core: initialized pinctrl subsystem
<6>[ 6.286311] PM: RTC time: 09:16:48, date: 2025-02-15
<6>[ 6.287296] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 6.288218] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 6.288518] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 6.288794] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 6.288862] audit: initializing netlink subsys (disabled)
<5>[ 6.289010] audit: type=2000 audit(1739611008.045:1): state=initialized audit_enabled=0 res=1
<6>[ 6.289956] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 6.289958] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 6.289964] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 6.289968] thermal_sys: Registered thermal governor 'user_space'
<6>[ 6.289972] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 6.290017] EISA bus registered
<6>[ 6.290048] cpuidle: using governor ladder
<6>[ 6.290048] cpuidle: using governor menu
<6>[ 6.290048] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 6.290880] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 6.290907] PCI: Using configuration type 1 for base access
<6>[ 6.291052] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 6.292836] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 6.292842] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 6.292846] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 6.292851] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 6.312794] raid6: avx2x4 gen() 76869 MB/s
<6>[ 6.329793] raid6: avx2x2 gen() 82631 MB/s
<6>[ 6.346794] raid6: avx2x1 gen() 76737 MB/s
<6>[ 6.346798] raid6: using algorithm avx2x2 gen() 82631 MB/s
<6>[ 6.363794] raid6: .... xor() 57774 MB/s, rmw enabled
<6>[ 6.363798] raid6: using avx2x2 recovery algorithm
<6>[ 6.366116] fbcon: Taking over console
<6>[ 6.366433] ACPI: Added _OSI(Module Device)
<6>[ 6.366442] ACPI: Added _OSI(Processor Device)
<6>[ 6.366448] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 6.366455] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 6.936097] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 6.976304] ACPI: EC: EC started
<6>[ 6.976330] ACPI: EC: interrupt blocked
<6>[ 6.984196] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 6.984211] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 7.006828] Callback from call_rcu_tasks() invoked.
<6>[ 7.299197] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 7.299228] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 7.344071] ACPI: Interpreter enabled
<6>[ 7.344223] ACPI: PM: (supports S0 S4 S5)
<6>[ 7.344231] ACPI: Using IOAPIC for interrupt routing
<6>[ 7.353181] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 7.353196] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 7.384139] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 7.384224] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 7.453338] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 7.453659] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 7.457284] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 7.943947] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 7.953050] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 7.974832] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 7.978667] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 8.006251] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 8.033606] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 8.034325] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 8.035032] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 8.192001] ACPI: \: Can't tag data node
<3>[ 8.195445] ACPI: \: Can't tag data node
<3>[ 8.198599] ACPI: \: Can't tag data node
<3>[ 8.201776] ACPI: \: Can't tag data node
<3>[ 8.205208] ACPI: \: Can't tag data node
<6>[ 8.464376] ACPI: \_TZ_.FN00: New power resource
<6>[ 8.465692] ACPI: \_TZ_.FN01: New power resource
<6>[ 8.466940] ACPI: \_TZ_.FN02: New power resource
<6>[ 8.468343] ACPI: \_TZ_.FN03: New power resource
<6>[ 8.469645] ACPI: \_TZ_.FN04: New power resource
<6>[ 8.472562] ACPI: \PIN_: New power resource
<6>[ 8.478440] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 8.478469] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 8.484379] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 8.501161] PCI host bridge to bus 0000:00
<6>[ 8.501222] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 8.501237] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 8.501250] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 8.501263] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 8.501276] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 8.501292] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 8.508180] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 8.509475] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 8.509756] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 8.509770] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 8.509783] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 8.509862] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 8.512238] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 8.512274] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 8.514185] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 8.514219] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 8.514231] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 8.515665] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 8.515706] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 8.515721] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 8.515741] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 8.516288] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 8.516365] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 8.523536] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 8.523580] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 8.523596] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 8.523616] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 8.523759] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 8.524174] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 8.531274] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 8.531318] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 8.531333] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 8.531353] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 8.531492] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 8.531550] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 8.538953] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 8.538998] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 8.539017] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 8.539312] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 8.539345] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 8.539355] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 8.540014] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 8.540070] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 8.540153] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 8.542714] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 8.542770] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 8.542782] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 8.542852] pci 0000:00:0d.2: supports D1 D2
<6>[ 8.542859] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 8.544959] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 8.545014] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 8.545026] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 8.545113] pci 0000:00:0d.3: supports D1 D2
<6>[ 8.545121] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 8.547226] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 8.547291] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 8.547376] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 8.551616] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 8.551709] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 8.551815] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 8.552416] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 8.552471] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 8.552547] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 8.555737] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 8.555803] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 8.555816] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 8.556198] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.556323] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 8.557707] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.557792] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 8.560178] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.560289] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 8.562340] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.562490] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 8.564875] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 8.564969] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 8.565070] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 8.569152] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 8.569231] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027]
<6>[ 8.569242] pci 0000:00:16.3: BAR 1 [mem 0x94321000-0x94321fff]
<6>[ 8.569816] pci 0000:00:1c.0: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 8.569970] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 8.570062] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff]
<6>[ 8.570608] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 8.570824] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 8.579182] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 8.581503] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 8.581626] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 8.581646] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 8.581789] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 8.582545] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 8.582615] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 8.582631] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 8.584742] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.584872] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 8.585192] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 8.585282] pci 0000:00:1f.6: BAR 0 [mem 0x94300000-0x9431ffff]
<6>[ 8.585385] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 8.587195] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 8.587254] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 8.587267] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 8.587279] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 8.588251] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 8.588639] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 8.589031] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 8.589618] pci 0000:7f:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 8.589674] pci 0000:7f:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 8.590572] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 8.590678] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 9.007557] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 19.198259] Low-power S0 idle used by default for system suspend
<6>[ 19.250931] ACPI: EC: interrupt unblocked
<6>[ 19.250942] ACPI: EC: event unblocked
<6>[ 19.250977] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 19.250984] ACPI: EC: GPE=0x6e
<6>[ 19.250990] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 19.250998] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 19.252151] iommu: Default domain type: Translated
<6>[ 19.252157] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 19.253410] SCSI subsystem initialized
<7>[ 19.254063] libata version 3.00 loaded.
<6>[ 19.254167] ACPI: bus type USB registered
<6>[ 19.254235] usbcore: registered new interface driver usbfs
<6>[ 19.254268] usbcore: registered new interface driver hub
<6>[ 19.254307] usbcore: registered new device driver usb
<6>[ 19.254435] pps_core: LinuxPPS API ver. 1 registered
<6>[ 19.254440] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 19.254460] PTP clock support registered
<6>[ 19.255123] EDAC MC: Ver: 3.0.0
<6>[ 19.256990] efivars: Registered efivars operations
<6>[ 19.260332] NetLabel: Initializing
<6>[ 19.260337] NetLabel: domain hash size = 128
<6>[ 19.260341] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 19.260405] NetLabel: unlabeled traffic allowed by default
<6>[ 19.260419] mctp: management component transport protocol core
<6>[ 19.260424] NET: Registered PF_MCTP protocol family
<6>[ 19.260457] PCI: Using ACPI for IRQ routing
<7>[ 19.279753] PCI: pci_cache_line_size set to 64 bytes
<6>[ 19.280071] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 19.280201] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 19.280211] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 19.280214] e820: reserve RAM buffer [mem 0x68fa4000-0x6bffffff]
<7>[ 19.280216] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 19.280219] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 19.281059] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 19.281175] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 19.281230] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 19.281380] vgaarb: loaded
<6>[ 19.283880] clocksource: Switched to clocksource tsc-early
<5>[ 19.290550] VFS: Disk quotas dquot_6.6.0
<6>[ 19.290611] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 19.292781] AppArmor: AppArmor Filesystem Enabled
<6>[ 19.293188] pnp: PnP ACPI init
<6>[ 19.295376] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 19.295408] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 19.299099] system 00:02: [io 0x06a4] has been reserved
<6>[ 19.299122] system 00:02: [io 0x06a0] has been reserved
<6>[ 19.360543] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 19.360577] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 19.360608] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 19.360631] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 19.360659] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 19.360686] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 19.360712] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 19.360734] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 19.368884] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 19.376821] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 19.377301] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 19.391000] pnp: PnP ACPI: found 8 devices
<6>[ 19.417899] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 19.418642] NET: Registered PF_INET protocol family
<6>[ 19.418977] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 19.425674] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 19.426136] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 19.426605] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 19.427950] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 19.431113] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 19.431847] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 19.433497] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 19.435362] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 19.435506] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 19.435535] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 19.435559] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 19.435659] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 19.435677] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 19.435693] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 19.435711] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 19.435852] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 19.435943] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 19.436097] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 19.436186] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 19.436262] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 19.436389] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 19.436411] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 19.436438] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 19.436467] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 19.436482] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]
<6>[ 19.436504] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 19.436525] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 19.436558] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 19.436574] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]
<6>[ 19.436596] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 19.436617] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 19.436652] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 19.436738] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff]
<6>[ 19.436841] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 19.436856] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 19.436870] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 19.436886] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 19.436902] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 19.436919] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
<6>[ 19.436933] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 19.436947] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 19.436965] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff]
<6>[ 19.436978] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 19.436992] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 19.437030] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff]
<6>[ 19.437043] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 19.437058] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 19.437076] pci_bus 0000:7f: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 19.439674] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 19.443335] PCI: CLS 0 bytes, default 64
<6>[ 19.443543] DMAR: No RMRR found
<6>[ 19.443581] DMAR: No ATSR found
<6>[ 19.443592] DMAR: dmar1: Using Queued invalidation
<6>[ 19.443641] DMAR: dmar0: Using Queued invalidation
<6>[ 19.443663] DMAR: dmar2: Using Queued invalidation
<6>[ 19.445638] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 19.445821] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 19.445980] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 19.446129] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 19.453411] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 19.456923] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 19.457250] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 19.457560] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 19.457815] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 19.458071] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 19.458174] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 19.458280] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 19.458439] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 19.458602] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 19.458780] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 19.458881] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 19.459109] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 19.459209] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 19.459313] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 19.459416] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 19.459591] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 19.459699] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 19.459914] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 19.460187] pci 0000:00:1f.0: Adding to iommu group 16
<6>[ 19.460310] pci 0000:00:1f.3: Adding to iommu group 16
<6>[ 19.460428] pci 0000:00:1f.4: Adding to iommu group 16
<6>[ 19.460535] pci 0000:00:1f.5: Adding to iommu group 16
<6>[ 19.460644] pci 0000:00:1f.6: Adding to iommu group 16
<6>[ 19.460753] pci 0000:00:1f.7: Adding to iommu group 16
<6>[ 19.460969] pci 0000:7f:00.0: Adding to iommu group 17
<6>[ 19.480909] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 19.480931] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 19.480947] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 19.490451] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 19.490560] clocksource: Switched to clocksource tsc
<6>[ 19.490762] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 19.499798] Initialise system trusted keyrings
<5>[ 19.499934] Key type blacklist registered
<6>[ 19.500475] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 19.517304] zbud: loaded
<6>[ 19.519570] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 19.519755] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 19.519766] ntfs3: Read-only LZX/Xpress compression included
<5>[ 19.520410] integrity: Platform Keyring initialized
<5>[ 19.520441] integrity: Machine keyring initialized
<6>[ 19.531962] xor: automatically using best checksumming function avx
<5>[ 19.531979] Key type asymmetric registered
<5>[ 19.531998] Asymmetric key parser 'x509' registered
<6>[ 19.532188] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 19.532792] io scheduler mq-deadline registered
<6>[ 19.534314] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 19.537549] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 19.538457] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 19.541039] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 19.541849] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 19.544365] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 19.545211] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 19.547669] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 19.548615] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 19.549777] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 19.554818] Monitor-Mwait will be used to enter C-1 state
<7>[ 19.554949] Monitor-Mwait will be used to enter C-2 state
<7>[ 19.555038] Monitor-Mwait will be used to enter C-3 state
<6>[ 19.564927] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 19.565198] ACPI: button: Lid Switch [LID0]
<6>[ 19.565570] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 19.565835] ACPI: button: Sleep Button [SLPB]
<6>[ 19.566173] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 19.566690] ACPI: button: Power Button [PWRB]
<4>[ 19.578208] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.585114] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.593648] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.602298] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.611182] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.618921] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.626281] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.633482] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 19.712784] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 19.712795] ACPI: thermal: Thermal Zone [TZ00] (49 C)
<6>[ 19.714124] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 19.714373] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 19.716410] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 19.738182] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 19.769989] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 19.773229] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 19.799139] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 19.803622] hpet_acpi_add: no address or irqs in _CRS
<6>[ 19.803898] Linux agpgart interface v0.103
<6>[ 19.805213] ACPI: bus type drm_connector registered
<6>[ 19.832314] loop: module loaded
<6>[ 19.883099] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 20.049151] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 20.178228] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 20.453366] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 20.682193] Key type psk registered
<6>[ 20.685906] nvme 0000:7f:00.0: platform quirk: setting simple suspend
<6>[ 20.686918] tun: Universal TUN/TAP device driver, 1.6
<6>[ 20.688895] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 20.689122] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 20.689408] nvme nvme0: pci function 0000:7f:00.0
<6>[ 20.693510] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 20.695116] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 20.695139] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 20.695157] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 20.695631] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 20.695654] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.695665] usb usb1: Product: xHCI Host Controller
<6>[ 20.695672] usb usb1: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 20.695681] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 20.698081] hub 1-0:1.0: USB hub found
<6>[ 20.698194] hub 1-0:1.0: 1 port detected
<6>[ 20.703007] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 20.703024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.703036] usb usb2: Product: xHCI Host Controller
<6>[ 20.703044] usb usb2: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 20.703054] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 20.704370] hub 2-0:1.0: USB hub found
<6>[ 20.704443] hub 2-0:1.0: 3 ports detected
<6>[ 20.720563] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 20.720581] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 20.722197] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 20.723286] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 20.723300] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 20.723311] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 20.723476] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 20.723484] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.723490] usb usb3: Product: xHCI Host Controller
<6>[ 20.723494] usb usb3: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 20.723500] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 20.724543] hub 3-0:1.0: USB hub found
<6>[ 20.724580] hub 3-0:1.0: 8 ports detected
<6>[ 20.728164] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 20.741166] nvme0n1: p1 p2
<6>[ 20.778832] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 20.778943] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.779041] usb usb4: Product: xHCI Host Controller
<6>[ 20.779092] usb usb4: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 20.779149] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 20.781598] hub 4-0:1.0: USB hub found
<6>[ 20.781682] hub 4-0:1.0: 2 ports detected
<6>[ 20.794256] usbcore: registered new interface driver usb-storage
<6>[ 20.794454] usbcore: registered new interface driver usbserial_generic
<6>[ 20.794581] usbserial: USB Serial support registered for generic
<6>[ 20.794669] usbcore: registered new interface driver ftdi_sio
<6>[ 20.794726] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 20.794813] usbcore: registered new interface driver pl2303
<6>[ 20.794868] usbserial: USB Serial support registered for pl2303
<6>[ 20.795071] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 20.795087] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>[ 21.019273] usb 3-4: new high-speed USB device number 2 using xhci_hcd
<6>[ 21.142492] usb 3-4: New USB device found, idVendor=0424, idProduct=7500, bcdDevice= 1.00
<6>[ 21.142508] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 21.142514] usb 3-4: Product: USB Gigabit LAN
<6>[ 21.142518] usb 3-4: Manufacturer: WS
<6>[ 21.142522] usb 3-4: SerialNumber: 000000017b
<3>[ 21.658297] i8042: Can't read CTR while initializing i8042
<3>[ 21.658317] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 21.661235] mousedev: PS/2 mouse device common for all mice
<6>[ 21.665720] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 21.667832] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 21.668092] rtc_cmos rtc_cmos: setting system clock to 2025-02-15T09:17:04 UTC (1739611024)
<6>[ 21.668273] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 21.668328] i2c_dev: i2c /dev entries driver
<6>[ 21.679197] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 21.679299] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 21.679368] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 21.679586] device-mapper: uevent: version 1.0.3
<6>[ 21.682188] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 21.682381] platform eisa.0: Probing EISA bus 0
<4>[ 21.682398] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 21.682415] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 21.682431] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 21.682445] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 21.682460] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 21.682474] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 21.682489] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 21.682504] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 21.682519] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 21.682530] platform eisa.0: EISA: Detected 0 cards
<6>[ 21.682542] intel_pstate: Intel P-state driver initializing
<6>[ 21.687504] Hybrid CPU capacity scaling enabled
<6>[ 21.688937] intel_pstate: HWP enabled
<6>[ 21.688943] sdhci: Secure Digital Host Controller Interface driver
<6>[ 21.688950] sdhci: Copyright(c) Pierre Ossman
<6>[ 21.689063] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 21.690875] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 21.691474] drop_monitor: Initializing network drop monitor service
<6>[ 21.691648] NET: Registered PF_INET6 protocol family
<6>[ 21.694116] Segment Routing with IPv6
<6>[ 21.694149] In-situ OAM (IOAM) with IPv6
<6>[ 21.694188] NET: Registered PF_PACKET protocol family
<5>[ 21.694368] Key type dns_resolver registered
<4>[ 21.697369] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 21.697924] microcode: Current revision: 0x0000011b
<6>[ 21.698478] IPI shorthand broadcast: enabled
<6>[ 21.708730] sched_clock: Marking stable (21698001895, 10000792)->(21793868419, -85865732)
<6>[ 21.709465] registered taskstats version 1
<5>[ 21.711007] Loading compiled-in X.509 certificates
<6>[ 21.738497] Demotion targets for Node 0: null
<6>[ 21.738744] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 21.738750] kmemleak: Automatic memory scanning thread started
<4>[ 21.738752] ------------[ cut here ]------------
<4>[ 21.738758] Debug warning: early ioremap leak of 1 areas detected.
please boot with early_ioremap_debug and report the dmesg.
<4>[ 21.738767] WARNING: CPU: 0 PID: 1 at mm/early_ioremap.c:90 check_early_ioremap_leak+0x51/0x80
<4>[ 21.738792] Modules linked in:
<4>[ 21.738797] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc2-xe+ #1
<4>[ 21.738803] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<4>[ 21.738811] RIP: 0010:check_early_ioremap_leak+0x51/0x80
<4>[ 21.738816] Code: 48 83 c3 01 48 83 fb 08 75 e1 85 c0 75 0e 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 89 c6 48 c7 c7 b8 fb ea 82 e8 ff d3 b6 fd <0f> 0b b8 01 00 00 00 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 48
<4>[ 21.738828] RSP: 0000:ffffc900000f7dc0 EFLAGS: 00010246
<4>[ 21.738834] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000000
<4>[ 21.738840] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
<4>[ 21.738846] RBP: ffffc900000f7dd0 R08: 0000000000000000 R09: 0000000000000000
<4>[ 21.738851] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
<4>[ 21.738857] R13: ffffffff83acf2f4 R14: ffffc900000f7de0 R15: 000000000003828c
<4>[ 21.738863] FS: 0000000000000000(0000) GS:ffff88885f200000(0000) knlGS:0000000000000000
<4>[ 21.738870] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 21.738875] CR2: ffff88887f7ff000 CR3: 0000000003248001 CR4: 0000000000f70ef0
<4>[ 21.738881] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[ 21.738886] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
<4>[ 21.738892] PKRU: 55555554
<4>[ 21.738895] Call Trace:
<4>[ 21.738898] <TASK>
<4>[ 21.738902] ? show_regs+0x6c/0x80
<4>[ 21.738909] ? __warn+0x93/0x1c0
<4>[ 21.738914] ? check_early_ioremap_leak+0x51/0x80
<4>[ 21.738919] ? report_bug+0x182/0x1b0
<4>[ 21.738926] ? handle_bug+0x6e/0xb0
<4>[ 21.738931] ? exc_invalid_op+0x18/0x80
<4>[ 21.738936] ? asm_exc_invalid_op+0x1b/0x20
<4>[ 21.738944] ? check_early_ioremap_leak+0x51/0x80
<4>[ 21.738949] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 21.738953] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 21.738957] do_one_initcall+0x76/0x400
<4>[ 21.738964] kernel_init_freeable+0x3da/0x6a0
<4>[ 21.738972] ? __pfx_kernel_init+0x10/0x10
<4>[ 21.738977] kernel_init+0x1b/0x200
<4>[ 21.738981] ret_from_fork+0x44/0x70
<4>[ 21.738986] ? __pfx_kernel_init+0x10/0x10
<4>[ 21.738990] ret_from_fork_asm+0x1a/0x30
<4>[ 21.738997] </TASK>
<4>[ 21.739000] irq event stamp: 83015289
<4>[ 21.739008] hardirqs last enabled at (83015309): [<ffffffff814a4d09>] __up_console_sem+0x79/0xa0
<4>[ 21.739016] hardirqs last disabled at (83015316): [<ffffffff814a4cee>] __up_console_sem+0x5e/0xa0
<4>[ 21.739022] softirqs last enabled at (83015304): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 21.739029] softirqs last disabled at (83015295): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 21.739036] ---[ end trace 0000000000000000 ]---
<5>[ 21.739215] Key type .fscrypt registered
<5>[ 21.739220] Key type fscrypt-provisioning registered
<6>[ 21.741761] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 21.744316] Key type encrypted registered
<6>[ 21.744323] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 21.744407] ima: No TPM chip found, activating TPM-bypass!
<5>[ 21.744421] Loading compiled-in module X.509 certificates
<5>[ 21.745181] Loaded X.509 cert 'Build time autogenerated kernel key: ec75859225ce673834a286d808b35270462e3688'
<6>[ 21.745192] ima: Allocated hash algorithm: sha256
<6>[ 21.745233] ima: No architecture policies found
<6>[ 21.745321] evm: Initialising EVM extended attributes:
<6>[ 21.745325] evm: security.selinux
<6>[ 21.745329] evm: security.SMACK64
<6>[ 21.745331] evm: security.SMACK64EXEC
<6>[ 21.745334] evm: security.SMACK64TRANSMUTE
<6>[ 21.745338] evm: security.SMACK64MMAP
<6>[ 21.745341] evm: security.apparmor
<6>[ 21.745343] evm: security.ima
<6>[ 21.745346] evm: security.capability
<6>[ 21.745349] evm: HMAC attrs: 0x1
<6>[ 21.747229] PM: Magic number: 13:773:272
<6>[ 21.747440] printk: legacy console [netcon0] enabled
<6>[ 21.747445] netconsole: network logging started
<6>[ 21.748034] RAS: Correctable Errors collector initialized.
<6>[ 21.748171] clk: Disabling unused clocks
<6>[ 21.748181] PM: genpd: Disabling unused power domains
<6>[ 21.748677] md: Waiting for all devices to be available before autodetect
<6>[ 21.748683] md: If you don't use raid, use raid=noautodetect
<6>[ 21.748689] md: Autodetecting RAID arrays.
<6>[ 21.748923] md: autorun ...
<6>[ 21.748926] md: ... autorun DONE.
<6>[ 21.790171] EXT4-fs (nvme0n1p2): mounted filesystem 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f ro with ordered data mode. Quota mode: none.
<6>[ 21.790232] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 21.790742] devtmpfs: mounted
<6>[ 21.802702] Freeing unused decrypted memory: 2028K
<6>[ 21.803536] Freeing unused kernel image (initmem) memory: 5624K
<6>[ 21.803558] Write protecting the kernel read-only data: 34816k
<6>[ 21.803987] Freeing unused kernel image (text/rodata gap) memory: 76K
<6>[ 21.804372] Freeing unused kernel image (rodata/data gap) memory: 976K
<6>[ 21.809177] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 21.809203] Run /sbin/init as init process
<7>[ 21.809207] with arguments:
<7>[ 21.809208] /sbin/init
<7>[ 21.809209] with environment:
<7>[ 21.809210] HOME=/
<7>[ 21.809210] TERM=linux
<7>[ 21.809211] BOOT_IMAGE=/boot/drm_intel
<7>[ 21.855670] systemd[1]: Inserted module 'autofs4'
<7>[ 21.874476] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 21.874518] systemd[1]: Detected architecture x86-64.
<7>[ 21.875798] systemd[1]: Hostname set to <shard-lnl-2>.
<7>[ 22.082582] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 22.083153] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 22.145331] systemd[1]: Queued start job for default target graphical.target.
<7>[ 22.177750] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 22.181787] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 22.185239] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 22.185712] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 22.186845] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 22.187040] systemd[1]: Expecting device dev-disk-by\x2duuid-BB99\x2d8925.device - /dev/disk/by-uuid/BB99-8925...
<7>[ 22.187186] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 22.187332] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 22.187450] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 22.187561] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 22.187677] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 22.188073] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 22.189313] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 22.189705] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 22.190125] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 22.190429] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 22.190663] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 22.190977] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 22.191356] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 22.191646] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 22.191826] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 22.192208] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 22.192481] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 22.195389] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 22.197853] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 22.200465] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 22.203220] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 22.208816] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 22.212083] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 22.215770] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 22.218783] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 22.221625] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 22.224661] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 22.228432] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 22.231897] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 22.237052] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 22.241326] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 22.244183] systemd-journald[208]: Collecting audit messages is disabled.
<7>[ 22.244622] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 22.245164] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 22.251974] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 22.260711] pstore: Using crash dump compression: deflate
<7>[ 22.262357] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 22.262558] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 22.262640] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 22.265610] pstore: Registered efi_pstore as persistent store backend
<6>[ 22.267255] fuse: init (API version 7.42)
<7>[ 22.268554] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 22.276062] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 22.438433] EXT4-fs (nvme0n1p2): re-mounted 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f r/w. Quota mode: none.
<6>[ 22.476809] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:400424960k SS
<7>[ 22.500838] systemd-journald[208]: Received client request to flush runtime journal.
<7>[ 22.517861] systemd-journald[208]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 22.517879] systemd-journald[208]: Rotating system journal.
<4>[ 23.146457] nvme nvme0: using unchecked data buffer
<6>[ 23.312561] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 23.366572] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 23.377122] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 23.399637] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<5>[ 23.443741] audit: type=1400 audit(1739611026.273:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=450 comm="apparmor_parser"
<5>[ 23.444080] audit: type=1400 audit(1739611026.274:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=449 comm="apparmor_parser"
<5>[ 23.444699] audit: type=1400 audit(1739611026.274:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=451 comm="apparmor_parser"
<5>[ 23.449300] audit: type=1400 audit(1739611026.278:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=453 comm="apparmor_parser"
<5>[ 23.451733] audit: type=1400 audit(1739611026.281:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=454 comm="apparmor_parser"
<5>[ 23.452933] audit: type=1400 audit(1739611026.282:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=455 comm="apparmor_parser"
<5>[ 23.454872] audit: type=1400 audit(1739611026.284:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=456 comm="apparmor_parser"
<5>[ 23.458354] audit: type=1400 audit(1739611026.288:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=457 comm="apparmor_parser"
<5>[ 23.460335] audit: type=1400 audit(1739611026.290:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=458 comm="apparmor_parser"
<5>[ 23.465021] audit: type=1400 audit(1739611026.294:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=459 comm="apparmor_parser"
<6>[ 23.490237] pci 0000:00:05.0: Setting to D3hot
<6>[ 23.502053] pci 0000:00:0b.0: Setting to D3hot
<4>[ 23.514370] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 23.514592] intel_pmc_core INT33A1:00: initialized
<3>[ 23.530601] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 23.541560] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 23.921428] ACPI: bus type thunderbolt registered
<6>[ 23.936397] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 23.952300] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 23.964448] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 23.964453] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 23.964562] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 23.966087] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 23.979796] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 23.988260] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 24.007859] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 24.012556] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 24.012564] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 24.014306] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 24.014683] intel_rapl_common: Found RAPL domain package
<6>[ 24.014693] intel_rapl_common: Found RAPL domain dram
<6>[ 24.060396] smsc75xx v1.0.0
<6>[ 24.120971] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 24.134855] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 24.134862] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 24.134864] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 24.134866] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 24.134867] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 24.159397] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 24.175452] cryptd: max_cpu_qlen set to 1000
<6>[ 24.206010] AES CTR mode by8 optimization enabled
<6>[ 24.214253] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 24.222853] smsc75xx 3-4:1.0 eth0: register 'smsc75xx' at usb-0000:00:14.0-4, smsc75xx USB 2.0 Gigabit Ethernet, 80:3f:5d:08:f2:ce
<6>[ 24.233112] usbcore: registered new interface driver smsc75xx
<4>[ 24.242572] block nvme0n1: No UUID available providing old NGUID
<6>[ 24.404380] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:34:08
<6>[ 24.404388] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 24.404508] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 24.522703] evm: overlay not supported
<6>[ 24.690023] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 24.720379] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 24.720384] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 24.720386] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 24.979721] loop0: detected capacity change from 0 to 8
<6>[ 25.040588] intel_rapl_common: Found RAPL domain package
<6>[ 25.040594] intel_rapl_common: Found RAPL domain core
<6>[ 25.040851] intel_rapl_common: Found RAPL domain dram
<6>[ 25.040853] intel_rapl_common: Found RAPL domain psys
<6>[ 25.206212] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 25.223584] smsc75xx 3-4:1.0 enx803f5d08f2ce: renamed from eth0
<4>[ 25.236468] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[ 25.252549] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 25.252580] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 25.729885] hid: raw HID events driver (C) Jiri Kosina
<6>[ 25.736434] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 25.776320] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.777422] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.778709] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.779574] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.780797] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.781432] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.787447] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.791370] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.795399] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.798712] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.802082] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.804639] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 26.334778] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 26.334801] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 27.286399] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 27.286428] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 27.535093] smsc75xx 3-4:1.0 enx803f5d08f2ce: link up, 1000Mbps, full-duplex, lpa 0xD101
<6>[ 27.555795] smsc75xx 3-4:1.0 enx803f5d08f2ce: link up, 1000Mbps, full-duplex, lpa 0xD101
<7>[ 36.186118] systemd-journald[208]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 50.903975] [IGT] xe_module_load: executing
<7>[ 50.917644] [IGT] xe_module_load: starting subtest load
<6>[ 51.105440] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 51.107140] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 51.107150] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 51.107244] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 51.107321] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 51.115927] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 51.120430] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.120533] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 51.120610] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 51.120680] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.120750] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.120819] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.120887] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.120953] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.121036] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.121102] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.121167] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.121231] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.121293] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.121354] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.121414] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.121526] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 51.122880] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 51.122974] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.128054] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 51.130923] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 8ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.132196] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.132344] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 51.132522] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000fb
<7>[ 51.132655] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,000000fb
<7>[ 51.132784] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 51.132910] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.133052] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 51.133973] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 51.138336] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 51.138481] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.138606] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 51.138728] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.138849] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 51.138968] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.139104] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.139218] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.139330] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.139439] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.139547] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.139653] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.139759] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.139871] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 51.141715] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 51.145264] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 51.146348] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 51.146490] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.146649] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 51.148280] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.148465] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.168053] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.168498] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.168688] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 51.168872] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 51.169055] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 51.169219] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 51.169386] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.169586] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 51.170342] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 51.170703] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 51.171048] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 51.171378] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 51.171654] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 51.171913] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 51.172180] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 51.172440] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 51.172721] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 51.172951] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 51.173262] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 51.173542] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 51.173821] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 51.174124] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 51.174428] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 51.174692] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 51.174944] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 51.175231] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 51.175474] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.175702] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.175914] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 51.176140] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.176359] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.176567] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.176764] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 51.176955] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.177197] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.177390] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.177568] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 51.177748] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.177905] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.178063] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.178210] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 51.178348] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.178483] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.178614] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.178739] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 51.178863] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.178986] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.179124] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.179249] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 51.179887] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 51.180048] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 51.180188] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 51.180321] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 51.180450] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 51.180577] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 51.180701] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 51.180817] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 51.180923] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 51.181045] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 51.181152] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 51.181252] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 51.181351] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 51.181450] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 51.181547] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 51.181641] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 51.181733] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 51.181825] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 51.181918] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 51.182017] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.182120] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.182221] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.182320] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 51.182404] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 51.182486] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.182563] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.182640] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.182719] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 51.182841] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.182991] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 51.183147] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.183305] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 51.183475] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 51.183608] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 51.183700] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 51.183791] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.183914] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 51.184011] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 51.184035] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 51.184152] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 51.184253] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 51.184347] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 51.184698] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 51.184861] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 51.185764] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 51.185871] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 51.185956] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 51.186044] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 51.186143] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 51.186238] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 51.186329] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 51.186406] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 51.188699] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 51.188869] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 51.188964] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 51.189082] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 51.189183] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 51.189280] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 51.189379] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 51.189470] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 51.189586] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.189722] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 51.189854] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.189986] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 51.190143] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.190286] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 51.190430] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 51.190530] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 51.190604] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.190674] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 51.190756] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.190835] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 51.190917] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.190997] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 51.191095] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 51.191173] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 51.191251] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.191329] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 51.191406] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.191488] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 51.191603] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.191723] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 51.193097] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 51.197207] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.197387] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 51.197528] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 51.197751] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 51.197956] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 51.198626] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 51.198765] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 51.198890] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 51.199025] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 51.199150] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 51.199268] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 51.199385] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 51.199498] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 51.199611] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 51.199760] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 51.200015] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.200138] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.200252] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.200365] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.200475] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.200738] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.201051] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.202082] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 51.202435] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<6>[ 51.202817] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 51.204505] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 51.205043] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 51.205890] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 51.207281] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 51.207812] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 51.209991] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.219863] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.219881] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.219883] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.219885] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.219888] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.219890] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.219895] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.219897] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.219899] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.219962] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.219964] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.219965] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.219975] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.220558] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 51.221107] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 51.221218] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 51.221362] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 51.221491] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 51.221659] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.221761] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.221855] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.221945] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.222039] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.222155] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.222380] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 51.222573] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.222725] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.223170] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 51.223303] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.223428] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.223711] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 51.223838] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.223964] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.224520] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 51.224664] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 51.224796] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 51.224888] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 51.224976] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 51.225071] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 51.225155] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 51.225237] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 51.225318] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 51.225399] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 51.225479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 51.225559] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 51.225639] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 51.225719] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 51.225799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 51.225879] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 51.225960] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 51.226045] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 51.226126] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 51.226205] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 51.226284] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 51.227082] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 51.227204] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 51.227307] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 51.227405] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 51.227493] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.227575] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.227654] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.227736] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 51.227821] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 51.227901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.227978] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.228067] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.228149] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 51.228234] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 51.228314] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.228391] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.228467] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.228581] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 51.228667] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 51.228748] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 51.228827] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 51.229091] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 51.229170] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 51.229245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 51.229321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 51.229395] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 51.229470] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 51.229546] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 51.229662] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 51.229763] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 51.229855] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 51.229941] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 51.230034] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 51.230118] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 51.230200] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 51.230311] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 51.230399] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 51.230482] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 51.230563] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 51.230645] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 51.230727] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 51.230808] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 51.230959] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 51.231077] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 51.231297] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 51.231406] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.231509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 51.231610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.231710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.231808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.231906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.232011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 51.232109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.232206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.232302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.232393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 51.232484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.232574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 51.232665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.232755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 51.232844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 51.232933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 51.233068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.233160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.233249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.233338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.233426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.233514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.233601] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.233688] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.233774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.233861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.233948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 51.234042] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 51.234130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.234217] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.234303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.234390] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.234475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.234560] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.234647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.234732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.234818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.234904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.234989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.235082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 51.235169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 51.235404] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 51.235505] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.235595] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.235953] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 51.236053] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 51.275208] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 51.339031] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 51.464281] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 51.464284] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 51.464285] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 51.464370] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 51.464469] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.464556] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.464637] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.464733] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 51.464831] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 51.464942] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 51.465029] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.465106] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.465195] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.465936] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 51.466024] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 51.466109] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 51.466200] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 51.466280] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 51.466353] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 51.466423] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 51.466493] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 51.466561] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 51.466625] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.466691] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.466755] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.466819] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.466881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.466943] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.467006] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.467066] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.467140] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.467219] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.467295] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.467369] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.467432] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.467488] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.467543] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.467595] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.467647] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 51.467707] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 51.467768] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 51.467827] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 51.467885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 51.467941] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 51.467998] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 51.468084] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 51.468162] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 51.468238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 51.468312] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 51.468378] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 51.468438] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 51.468877] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 51.468939] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 51.468996] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 51.469204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 51.469282] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 51.469346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 51.469540] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 51.469590] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 51.469638] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 51.469685] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 51.469734] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 51.469783] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 51.470254] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.470340] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 51.470405] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 51.470462] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.470517] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.470571] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.470623] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.470675] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.470726] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.470777] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.470828] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.470879] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.470927] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.470975] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.471060] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 51.471675] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 51.474760] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 51.489452] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 51.490249] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.495066] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 51.495169] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x000000C0 [0x60/00]
<7>[ 51.495257] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 51.498077] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.498429] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.499359] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 51.499448] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 51.499532] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 51.499607] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 51.499687] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 51.499761] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 51.499832] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 51.499901] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 51.499973] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 51.503911] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 51.504082] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 51.504198] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 51.506209] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 51.511133] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 51.511140] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 51.511142] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 51.511144] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 51.511146] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 51.511148] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 51.511149] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 51.511151] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 51.511153] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 51.511155] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 51.511201] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 51.511464] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 51.511739] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 51.512957] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 51.513195] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 51.513409] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 51.513616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 51.513822] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 51.514040] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 51.514240] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 51.514457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 51.514719] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 51.514933] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.515170] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.515383] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.515597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.515823] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.516034] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.516236] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.516401] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.516557] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.516706] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.516847] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.516988] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.517187] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.517340] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.517467] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.517591] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.517714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 51.517861] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 51.519174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 51.519361] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 51.519849] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 51.519988] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 51.520640] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 51.520770] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.520889] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 51.521013] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.521124] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 51.521229] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.521330] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.521431] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.521531] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.521627] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.521717] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.521804] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.521890] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.521972] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 51.522095] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 51.522228] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 51.543477] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 51.544654] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.544759] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.561348] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 16ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.561907] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.563219] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.565800] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.568216] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.611047] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 51.613581] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 51.614042] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 51.614514] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 51.614928] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 51.615336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.615777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.616235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.616649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.617070] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.619071] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 51.619589] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 51.619969] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 51.636641] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 51.651904] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 51.658691] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 51.659705] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 51.662866] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 51.662982] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 51.663694] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 51.664925] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 51.664981] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 51.665779] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 51.666568] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 51.666610] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 51.667048] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 51.667647] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 51.667676] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 51.667705] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 51.674976] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 51.677381] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 51.678215] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 51.678324] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 51.679370] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.679493] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.679608] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.679705] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.679827] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.679919] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.680002] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.680130] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.680150] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 51.680243] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.680261] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 51.680338] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.680353] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 51.680429] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 51.680572] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 51.680766] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 51.680780] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 51.681555] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.682078] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 51.682197] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.682309] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.682461] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.682465] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.682466] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.682467] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.682469] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.682470] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.682473] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.682474] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.682476] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.682495] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 51.682591] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 51.683257] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.683366] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 51.684305] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 51.684496] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.684498] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.684499] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.684528] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 51.684539] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.684548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 51.684556] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.684715] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 51.684725] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 51.684733] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.684851] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 51.684858] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 51.684865] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.684978] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 51.684985] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 51.684988] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 51.684990] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 51.684992] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 51.685069] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.685081] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 51.685084] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 51.685087] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 51.685091] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 51.685103] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.685132] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 51.685177] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 51.688165] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.692059] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d8f000
<6>[ 51.692771] fbcon: xedrmfb (fb0) is primary device
<7>[ 51.693791] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 51.693917] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 51.694044] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 51.694190] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 51.694315] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 51.694422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 51.694522] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 51.694617] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 51.694711] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 51.694805] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 51.694894] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 51.694982] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.695095] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.695199] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 51.695302] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.695388] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.695467] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.695545] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 51.695620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 51.695699] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 51.695775] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 51.695850] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.695925] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.695999] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 51.696105] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.696201] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.696296] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.696377] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 51.696454] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 51.696531] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 51.696607] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 51.696723] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 51.696813] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 51.696900] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 51.696986] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 51.697087] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 51.697181] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.697273] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.697357] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.697429] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.697497] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.697563] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.697630] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.697695] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.697759] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.697822] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.697886] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.697954] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.698033] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.698119] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.698200] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.698283] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.698358] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.698423] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.698488] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.698551] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.698615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 51.698705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.698792] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.698878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.698964] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.699067] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.699198] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 51.699344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 51.699445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.699534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 51.699616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.699698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.699782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.699863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.699942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 51.700025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.700121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.700213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.700306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 51.700379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.700451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 51.700518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 51.700586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 51.700652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 51.700718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 51.700781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 51.700844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 51.700907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.700969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 51.701045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 51.701132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 51.701220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.701307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.701374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.701440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.701505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.701569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.701632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.701693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.701754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.701815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.701875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 51.701934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 51.701993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.702075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.702160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.702244] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.702321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.702383] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.702444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.702504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.702562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.702621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.702678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.702735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 51.702793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 51.702849] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 51.702905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 51.702963] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 51.703031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 51.703107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 51.703185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<6>[ 51.716161] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 51.716618] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 51.724167] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7>[ 51.739188] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 51.931463] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 51.932758] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 51.938796] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 51.938832] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.939187] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.939193] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 51.939540] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 51.991381] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.991675] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 52.021165] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.021656] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.021692] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 52.022663] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.022684] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 52.023081] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 52.023457] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 52.023739] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 52.024082] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 52.024343] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 52.024595] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 52.024842] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 52.025125] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 52.025364] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 52.025600] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 52.025887] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 52.026165] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 52.026396] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 52.026645] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 52.027044] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.027301] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.027523] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 52.027739] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.028211] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 52.028571] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining)
<7>[ 52.141914] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 52.523294] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 52.563167] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.563545] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 52.563898] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 52.599535] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.599846] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.600093] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 52.600468] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.739743] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.739745] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.739831] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.892286] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.894716] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 52.895306] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 52.899075] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 52.900405] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 52.901591] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 52.902894] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 52.904133] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 52.905567] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 52.905964] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 52.907776] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 52.908195] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 52.909088] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 52.909652] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 52.910040] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 52.910482] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 52.912834] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 52.912856] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 52.913203] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 52.926464] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 52.929526] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.930097] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 52.931759] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 52.934285] Console: switching to colour frame buffer device 180x56
<6>[ 52.948923] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 52.964240] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 52.964542] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 52.964605] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.964848] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 52.965439] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 52.965293] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 52.965492] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.965668] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 52.966031] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 52.966392] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 52.966714] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 52.967044] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 52.967346] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 52.967663] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 52.967874] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.967953] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 52.968293] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 52.968585] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 52.968869] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 52.968915] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.969199] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 52.969481] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 52.969386] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.969758] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 52.969845] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.970136] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 52.970470] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 52.970610] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.970628] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.970633] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.970637] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.970645] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.970650] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.970669] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.970673] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.970681] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.970777] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 52.970738] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 52.971087] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 52.971146] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.971384] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 52.971661] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 52.971999] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 52.972482] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 52.972978] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 52.973453] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 52.974349] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.974729] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 52.974895] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<5>[ 52.977037] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.977046] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.977051] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.977166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 52.977229] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.977268] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 52.977301] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.977799] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.978462] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.978881] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 52.979398] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.979843] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 52.979880] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 52.979913] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.980461] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.980878] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 52.980912] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 52.980942] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.981473] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.981515] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 52.981888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 52.981921] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 52.981935] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 52.981945] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 52.981954] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 52.982300] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.982367] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 52.982377] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 52.982386] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 52.982396] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 52.982442] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.988359] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 52.988805] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 52.995162] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 53.050031] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 53.052881] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 53.053209] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 53.053443] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 53.060491] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 53.060603] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 53.060669] [IGT] xe_module_load: exiting, ret=0
<7>[ 53.084046] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 53.084189] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 53.084290] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 53.091551] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.091696] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.091789] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.091848] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 53.091878] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.091956] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 53.091965] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.092254] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.092341] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.092425] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.092507] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.092589] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.092666] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.092733] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.092799] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.092865] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.092930] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.092996] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.093086] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.093164] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.093242] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.093322] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.093402] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.093481] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.093560] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.093637] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.093713] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.093787] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.093851] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.093915] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.093979] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.094056] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.094131] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.094204] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.094278] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.094344] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.094406] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.094467] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 53.100873] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 53.102716] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 53.107664] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 53.109802] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 54.020586] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.020653] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.020779] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.339954] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 55.493256] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 55.493821] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067